Search

Published After
Published Before

Search Results

  • Influence of nitrogen fertilisation on the technological quality of wheat
    47-55
    Views:
    47

    Wheat is one of the most grown crops around the world. Its primary use is in the production of bread, bakery, and confectionery. The provision of essential nutrients, mainly nitrogen, plays a pivotal role in the growth and development of wheat. The wheat varieties used in the experiment are Alfold and Mv. Menrot. The rates of nitrogen used in the experiment are: 0, 200, 400, 600, 800, and 1000 kg N ha-1. The aim of this study is to evaluate the effect of nitrogen fertilisation on technological quality of wheat and to find the appropriate fertiliser rate to reduce pollution. The results indicate that nitrogen fertilisation did not show a significant effect on thousand kernel weight and test weight. However, nitrogen fertilisation significantly affected protein content, gluten content, Zeleny sedimentation index, and the falling number. The higher the nitrogen fertilisation the better the technological quality parameters of the wheat. The protein content, gluten content, Zeleny sedimentation index and the falling number were the lowest at 0 kg N ha-1 followed by 200 kg N ha-1 then 400 kg N ha-1 and the highest at 600 kg N ha-1.

  • Changes in the Diaporthe helianthi Infection of Sunflower Hybrids Between 1998 and 2002
    214-233
    Views:
    66

    Plant protection, and especially the efficiency of protection against mycosis, is a very important production technological element concerning sunflower. The efficiency of production can be increased on the basis of a thorough pathological survey and its results carried out in a wide variety of hybrids, as the features of hybrids, the reactions of genetic bases to pathogens can be found out under domestic conditions.
    The tests were carried out at variety-test lots of OMMI for hybrids used for food or oil and other sunflower varieties admitted by the state at the Experimental Site DTTI Látókép, Centre of Agricultural Sciences, University of Debrecen between 1998 and 2002. The number of the tested hybrids was 49 in 1998, 45 in 1999, 49 in 2000, 55 in 2001, and 44 in 2002.
    Due to the infection source of high amounts remained from 1997 and the favourable weather conditions for the pathogens, an infection of high degree was experienced in the tested stands. The lowest infection index in the hybrids with a very short vegetative period was experienced with Beni hybrids. Comparing to the average of the hybridgroup with short vegetative period, a low infection index characterised the Baleno, Trident, IBH-166, Hysun 321, Resia, Alexandra, Cergold and Pixel hybrids. In 1999, among hybrids with medium vegetative period, Zoltán, Zsuzsa and Util hybrids could be highlighted because of their low infection index. In 1998, among confentionary hybrids, Marica-2 hybrid had the most favourable index values (2,55).
    During our trials, the experienced infection dynamics were compared in the event of hybrids with higher and lower susceptibility under different sowing technological elements. The results call for the fact that when a hybrid with higher susceptibility is produced, production technological elements, such as the time of sowing, influence considerably the damage caused by the pathogen, therefore it must not be ignored when its determination takes place. In the event of hybrids with lower susceptibility the change of the tested production technological elements within the biological optimum does not lead to the increased risk of the damage caused by Diaporthe helianthi.

  • The influence of climatic conditions of the harvest year on the wheat quality
    23-25
    Views:
    120

    Technological potential of wheat bread depends on the variety, manner and type of fertilizer, irrigation conditions and climatic conditions in their absence. This study was done on two varieties of wheat grown in Bihor county in a place with identical fertilization conditions, for two different years: year 2014 can be characterized by a greater quantity of rainfall during the wheat vegetation period and the year 2015 can be characterized by a drought during the growing wheat on the subject of the study. In the study was examined whether climatic conditions have any influence on the technological potential of wheat, not taking into account the data on quantity produced per hectare in the years studied.

  • Economic questions of precision maize production on chernozem soil
    293-296
    Views:
    122

    It is one of the main topical objective to establish the conditions of sustainable farming. The sustainable development in crop production also calls for the harmony of satisfying human needs and providing the protection of environmental and natural resources; therefore, the maximum consideratio of production site endowments, the common implementation of production needs and environmental protection aims, the minimum load on the environment and economicalness. Precision farmin encompasses the farming method which is adjusted to the given production site, the changing  technology in a given plot, the integrated crop protection, cutting edge technologies, remote sensing, GIS, geostatistics, the change
    of the mechanisation of crop production, and the application of information technology novelties in crop production. Modern technology increases efficiency and reduces costs. The efficiency of crop production increases by reducing losses and the farmer has access to a better decision support information technology system. In addition, we consider it necessary to examine the two currently most important economic issues: “is it worth it?” and “how much does it cost?”. During the analysis of agricultural technologies, we used the precision crop production experiment database of KITE Zrt. and the Institute for Land Utilisation, Regional Development and Technology of the Centre for Agricultural and Applied Economic Sciences of the University of Debrecen.
    During our analytical work, we examined three technological alternatives on two soil types (chernozem and meadow). The first technology is the currently used autumn ploughing cultivation. We extended our analyses to the economic evaluation of satellite navigationassisted ploughing and strip till systems which prefer moisture saving. On chernozem soil, of the satellite-based technological alternatives, the autumn ploughing cultivation provided higher income than strip till. In years with average precipitation supply, we recommend the precision autumn ploughing technological alternative on chernozem soils in the future. On meadow soil, the strip till cultivation technology has more favourable economical results than the autumn ploughing. On soils with high plasticity – considering the high time and energy demand of cultivation and the short amoung of time available for cultivation – we recommend to use strip till technologies. 

  • Will there be a horticultural triangle (cluster)? Thoughts about the reconstruction of the Hungarian horticulture between two European regions
    21-27
    Views:
    99

    The authors of this study seek the answer to the question how to develop, in the first decade or decades of the 21st century, the university-level
    horticultural scientific training, the horticultural innovation and the scientific co-operation between companies and universities in Debrecen and
    in the North Great Plain Region and – in a wider sense – in Hungary to a standard being competitive even in European terms. With the synthesis
    of the prospects of past, present and future, they drew the following conclusions. The reconstruction of agriculture, horticulture and food industry
    is a part of reforming Hungary's countryside. Horticulture, producing high added value, will be able to decisively contribute to the plan whereas
    the value presently produced in an agriculturally cultivated area of 1,000 euros/hectare can reach 2,000 to 3,000 euros in the next two decades.
    A necessary and indispensable precondition to achieving this is the strengthening of the innovation output of the Hungarian horticultural sector.
    Despite the numerous technical criticisms formulated in connection with the serious problems of Hungarian agricultural and horticultural
    scientific innovation, no progress has been made in this field for the past one and a half decade. The scientific research of this topic hardly
    continued or did not continue at all, the up-to-date surveys and in-depth analyses were missing. The objective, basic principles and tasks of the
    Act CXXXIV of 2004 (TTI) enacted concerning research-development and technological innovation are clear and progressive. The co-operation
    between the National Research Technology Office and the Hungarian Academy of Sciences, the setting up of the Innovation Fund are heartening
    opportunities. These – along with the new Higher Education Bill to be passed – may as well be suitable for restarting the Hungarian agricultural
    and horticultural scientific innovation. In our opinion, this requires a new, well-considered national agricultural programme, which can be
    conceived in the framework of the "Ferenc Entz National Horticultural Plan" proposed by us for horticulture. In the most eastern Hungarian
    university knowledge centre, at the University of Debrecen, the continuing of the horticultural scientific innovation strategy started in the last
    decade may be the focal point and generator of the development of the so-called "Hungarian Horticultural Triangle”, or "Hungarian
    Horticultural Cluster". This region comprises the Northern and Southern Great Plain Regions and the area between the Danube and Tisza
    Rivers. Here, about 70 to 75% of the total Hungarian horticultural commodity stock is produced. The objective of the HORT-INNOTECH
    DEBRECEN programme planned in 2004 by the University of Debrecen, Centre of Agricultural Science is to establish the horticultural scientific
    research-development and technological innovation structure and knowledge base of the Hungarian Horticultural Triangle / Hungarian
    Horticultural Cluster. In harmony with this, the objectives are to bring about competitive, new horticultural products, to improve the conditions
    of utilising them, to enhance the competitiveness of enterprises based on technological innovation, to make use of the research-development and
    innovation opportunities available in the regions in an efficient manner, to as full extent as possible, to encourage the creation of places of
    employment producing high added value in the field of horticulture, to improve the technical skills of those employed in horticultural researchdevelopment and to promote their enhanced recognition by the society.

  • Correlation of pruning time and fruiting part differentiation of sweet cherry cultivars
    131-134
    Views:
    66

    There are several extended studies in sweet cherry production in Hungary and all over the world i.e. for creation and maintainence of smaller tree crown and high density orchards. The use of suitable dwarf rootstocks for this fruit species are very limited. On one hand, most of the draf rootstocks do not cause enough growth reduction and on the other hand these rootstocks are get old very quikcly and their fruits become small, and therefore, they not serve the requirements for intensification. In summary, there is a need for those rootstock which are vital, regeneration enhanching and delay ageing. Due to ensuring above features, Prunus mahaleb is still an obvious solution for intesive production. Increasing intensification can be obtained by use of modernisation of technological elements and suitable cultivar choice. 
    According to this increasement of intensity through application of novel technological elements (timing, manner and severity of pruning) and selection of the proper cultivar is implement able. Important differences are experienced between sweet cherry cultivars in their growth attributes, light demand and dynamics of fall back in regenerative potencial of different aged wood parts. From this point knowledge of the abow detailed is very important in order to maintain rentability of already established plantations. Our work shows the formation of production part in
    9-year old plantation with spike spindle and free spindle crown forms depending on pruning timing (winter, summer) and determining of their various effects. 

  • Economics of broiler fattening in Hungary
    171-180
    Views:
    84

    The purpose of this study is to present economic circumstances of Hungarian broiler sector based on secondary data after brief introduction of international and home situations. Then it analyzes costs, revenues and profit relationships of producers, which has competitive efficiency indicators and high standard production based on a model created on the basis of primary data.
    The paper confirms the Hungarian poultry sector international competitiveness falling. One important reason of this situation is the low profitability in the sector, which is typical of both farms produce under worse efficiency indicators and high standard producers. Beside lack of technological standards and efficiency, adverse trend of output and input price – mainly feed price – impact low profitability.
    Realization of technological developments and improvements according to international tendency, which affect directly or indirectly the efficiency and costs of broiler fattening are determining in point of realizable profit

  • Impact of fertilization on production capacity and reaction to fertilization in maize hybrids
    42-46
    Views:
    67

    New varieties and fertilization have significantly increased yields of maize in recent decades. It has to be taken into account however that the interactions and the balanced combination of cropping factors (ecological, biological and agrotechnical) are the main factors which determine yields. Weather conditions were rather unfavourable during the last decade. Extreme weather conditions occurred due to global warming; 6 of 10 years were plagued by drought. Consequently yields increased from 10-20% to 30-50%. In view of varieties the situation is advantageous, maybe the supply of hybrids is too high, nevertheless those hybrids need to be selected which are particularly well adjusted to the ecological conditions. Many technologies can be applied which vary according to intensity, but the balanced combination of cropping factors should be secured on the basis of the hybrid’s intensity. Among agrotechnical factors the compensation of nutrients and technological conditions were inadequate. These days farmers only use nitrogenous fertilizers consequently they significantly decrease the easily available P and K content of the soil which in long term leads to the deterioration of the soil’s productivity. The technological background is therefore important, because sufficient yields can only be expected if agrotechnical operations are carried out in the right time and quality. 

  • Researches on the quick method of sugar productivity evaluation
    26-29
    Views:
    63

    In a sugar factory it is necessary to be able to calculate very quickly the sugar productivity possible to obtain by processing the beet
    having a certain technological quality. That is the reason why, in the following lines, it is presented a very quick method used by the Institute of
    Alimentary Chemistry, the laboratory for sugar research and engineering, for such kind of quick calculations, but with a high theoretical and
    practical precision.

  • Mobile Internet Usage Possibilities and Requirement in Agriculture
    394-402
    Views:
    63

    In this paper, I looked at the mobile Internet from technological, economical and sociological aspects and then pointed to several agricultural possibilities for theri usage. Examining the effects and driving forces of mobile communication, I can say that it is a very complex system. The social connections of mobile communication and the arising problems show that it affects several areas of everyday life. By looking at the business processes, all costs, advantages and disadvantages can be seen clearly. Overview the mobile Internet from the technological aspect and I discuss related technology and applicable utilities, as well as two possibilities for using wireless Internet: 3G and WiFi. Among the possible usages, I gave several examples to give an impression of all the diverse possibilities this technology offers. There are some really useful applications in customer service, precision farming, transport, agriculture and food industry. Finally, I talked about the mobile Internet in Hungary and in the other EU countries.

  • The European Research Area: in quest of the Lisbon goals
    73-79
    Views:
    68

    strong educational and scientific knowledge basie is one of Europe's traditional key assets that has made it possible for our continent to become world class in several research fields. Despite these great achievements, the position of the European research and technological development (RTD) potential is currently being challenged by a rapidly changing global competition, including the two main rivals, the US and Japan. The European Union (EU) is behind these countries as regards research and innovation output. Moreover, European research is faced with the
    implications of globalisation of markets and industries, digitalisation and new technologies, as well as a need to address societal issues such as an ageing population or climate change.
    At the same time, the European Union (EU) is facing the uneven distribution of RTD capacities and excellence within its own borders, especially the EU12 countries are lagging behind in this
    respect.
    In order to meet this twofold challenge the EU has to step up its efforts for the creation of a legitimate "European Research Area" that will make the EU more competitive on the international scene, and also encourage the less developed EU member states to invest more and better into research and innovation.

  • Economic questions of maize production on different soil types
    289-292
    Views:
    103

    The requirements and objective of cultivation are in constant change. For example, different cultivation systems are developed for the purpose of soil protection, the preservation of its moisture content and on soils with various precipitation supply or production site conditions. Traditionally, one of the most important cultivation aims is crop needs. Further cost saving in fertilisation and crop protection can only be achieved by reducing the quality and quantity of production or it cannot be achieved at all. Furthermore, the costs can be significantly reduced by means of the rationalisation of cultivation. Energy and working time demand can also be notably reduced if ploughing is left out from the conventional tillage method. The key requirement of economicalness is to perform the cultivation at the optimal date, moisture level and the lowest possible cost.
    Within production costs, the cost of cultivation is between 3–17%, while they are between 8–36% within machinery costs. It is the vital condition the usability of each technological method to progressively reduce costs. Our evaluation work was carried out with the consideration of the yield data obtained from cooperating farms and the experiment database of the Institute for Land Utilisation, Regional Development and Technology of the Centre for Agricultural and Applied Economic Sciences of the University of Debrecen. Three technological methods (ploughing, heavy cultivator and loosening tillage) were used on several soil types which differ from in terms of cultivability (chernozem, sandy and sandy clay soils) from the economic/economical aspect. We examined the sectoral cost/income relation of maize production as an indicator plant. The maize price during the analytical period was 45 thousand HUF per t. On chernozem soils, the production of maize can be carried out on high income level, while maize production on sandy soils has a huge risk factor. The role of cultivation is the highest on high plasicity soils, since they have a huge energy
    demand and the there is a short amount of time available for each procedure in most cases.

  • Comparision of growth of mature all-female and mixed-sex Common carp (Cyprinus carpio L.) stocks in RAS
    65-68
    Views:
    429

    The common carp (Cyprinus carpio L.) is the most important fish species in Hungary, it is more than 70% of the total Hungarian fish production. The common carp production is important not only just in Hungary but in Middle-East Europe, as well as Southeast Asia. Majority of the production comes from fishpond culture. If the production sector wants to meet the increasing customer demands, there is need to intensify research on the intensive fish production opportunities for example all-female common carp technologies. The all-female technology is one of a genom-manipulation technology. Its production showed better growth rate than mixed-sex population in pond culture. Our experiment combined the recirculation aquaculture system (RAS) and the all-female common carp stocks intensification technologies. The reason for the experiment, is that there are no result about the growth of all-female common carp growth in RAS.

    The experiment used the „Tatai grey scale type” common carp stocks. We propagated two all-female stocks (T2 and T3) and a control group (TK). Due to technological characteristics of RAS, the water quality parameters were the same for all treatments and corresponded to the technological tolerance of common carp.

    The experimental period was from July 10, 2019 – November 20, 2019. Result of growth performance showed that the growth of mixed-sex stock was significantly higher than all-female stocks; (Control=3692.0±590.5g, T2=3438.8±415.4g, T3=3294.1±659.1g). Feed conversation ratio (Control=1.3±0.1 T2=1.5±0.2 T3=1.6±0.5) and SGR% (Control=0.8±0.0 T2=0.7±0.1 T3=0.7±0.1) were similar.

    By the results it can be said the all-female common carp technology has neither advantages nor disadvantages compared to the mixed-sex stock. The all-female technology can be beneficial if the consumers need female common carps. It is worth continuing the experiment and examine how the stocks will perform above 3kg body weight.

  • Fruit quality parameters of sweet cherry cultivars produced under rain protected plastic foil and general orchard conditions
    66-69
    Views:
    78

    Due to global climate warming, frequency of negative weather effects (rainfall amounts, distribution, sortness) are increasing. Rainfall
    amounts and frequency has also great effect of sweet cherry fruit quality around fruit ripening. Determination of optimal technological
    basics (such as first class fruit quality and economic value) are an important task in dynamically growing sweet cherry production. This can
    be solved with introduction of a new intensive training system. One of the solutions can be rain protecting foil which can reduce fruit
    cracking and fruit rot. Without this option sweet cherry can not be grown in many countries. In this study, fruit quality parameters were
    compared from a 10 year old intensive (4 x 1m) sweet cherry orchard. The effect of rain protecting foil was tested in comparison with fruits
    from not covered tree

  • Microbiological status of bulk tank milk and different flavored gomolya cheeses produced by a milk producing and processing plant
    73-78
    Views:
    228

    The microbiological quality of milk is important not only for food safety, but it can also influence the quality of dairy products. In this study, our aim was to assess the microbiological status of the bulk milk of a milk-producing farm, and some natural and flavored (garlic, dill, onion) gomolya cheeses made from pasteurized milk produced by their own processing plant. We determined the number of coliform bacteria, Escherichia coli, Staphylococcus aureus, and molds of three milk and eight cheese samples. The tests were conducted between July and September, 2017.

    In bulk milk, the mean coliform count was 3.83±0.17 log10 CFU/ml; the mean E. coli count was 1.38±0.14 log10 CFU/ml; the mean mold count was 3.74±1.30 log10 CFU/ml; and the S. aureus count was <1.00 log10 CFU/ml, respectively. The mean coliform count in gomolya cheeses was 3.69±1.00 log10 CFU/g; the mean E. coli count was 2.63±0.58 log10 CFU/g; the mean S. aureus count was 3.69±1.35 log10 CFU/g and the mean mold count was 1.74±0.37 log10 CFU/g. The amount of coliforms detected in different flavored gomolya cheeses were significantly different (P<0.05). More than 10 CFU/g of E. coli was found only in the dill flavored cheeses, and S. aureus was found only in dill (3.66±1.86 log10 CFU/g) and onion (3.71±0.52 log10 CFU/g) flavored gomolya cheeses. Based on the obtained results, it was found that the amount of coliform bacteria and E. coli in bulk milk exceeded the limit set in regulation of the Hungarian Ministry of Health (MoH) 4/1998 (XI. 11.) and the amount of S. aureus was below the limit. For gomolya cheeses, the S. aureus count exceeded the limit. The amount of coliform bacteria remained above the limit in cheeses, except for the garlic flavored gomolya cheese. In cheeses, a larger E. coli count was detected than in the bulk milk, but there is no specific limit for cheeses in the regulation. The mold count exceeded the limit specified in the regulation in cheeses, but a lower value was detected relative to milk.

    The results show that, in the case of bulk milk and gomolya cheeses, certain detected quantities exceeded the limit values set forth in regulation of MoH 4/1998 (XI. 11.). The results indicate an inadequate microbiological state of the raw material and the finished products. The reasons for these are due to reduced technological hygiene or the inappropriate handling of raw material and finished products. In this study, we have summarized the results of our preliminary studies, which can provide a basis for further hygiene studies.

  • The Role of the 4M-ECO Agrieconomical Modell in the Crop Cultivation
    170-173
    Views:
    87

    Today, c for agricultural use are of ever increasing significance. These provide an opportunity for more accurate planning, and favourably influence the efficiency and economic performance of given enterprise. The relevant literature divides models according to various criteria. The most common is the division between optimising and non-optimising models. Non-optimising models generally endeavour to make the best use of technological lines, machine capacity, while optimising models are used to optimise revenue returns from sales or, occasionally, production costs. In our case, revenue and returns from sales were optimised. The models examined consist of several modules. Which include the following: plant cultivation modules, evaluations (assessment of situation, conception plan, complex corporate evaluation), supplementary sheets (sheets and charts for ancillary plant production, general costs of operation, summary and crops structure optimisation). With the help of the model, annual a particular can be made for an optimal crop structure the resources of the enterprise. This it becomes possible to define the largest net revenue on a corporate level.

  • Agronomic research in Martonvásár, aimed at promoting the efficiency of field crop production
    89-93
    Views:
    115

    The effect of crop production factors on the grain yield was analysed on the basis of three-factorial experiments laid out in a split-split-plot design. In the case of maize the studies were made as part of a long-term experiment set up in 1980 on chernozem soil with forest residues, well supplied with N and very well with PK. The effects of five N levels in the main plots and four sowing dates in the subplots were compared in terms of the performance of four medium early hybrids (FAO 200). In the technological adaptation experiments carried out with durum wheat, the N supplies were moderate (2010) or good (2011), while the P and K supplies were good or very good in both years. Six N top-dressing treatments were applied in the main plots and five plant protection treatments in the subplots to test the responses of three varieties. 
    The results were evaluated using analysis of variance, while correlations between the variables were detected using regression analysis.
    The effect of the tested factors on the grain yield was significant in the three-factorial maize experiment despite the annual fluctuations, reflected in extremely variable environmental means. During the given period the effect of N fertilisation surpassed that of the sowing date and the genotype. Regression analysis on the N responses for various sowing dates showed that maize sown in the middle 10 days of April gave the highest yield, but the N rates required to achieve maximum values declined as sowing was delayed. 
    In the very wet year, the yield of durum wheat was influenced to the greatest extent by the plant protection treatments, while N supplies and the choice of variety were of approximately the same importance.  In the favourable year the yielding ability was determined by topdressing and the importance of plant protection dropped to half,  while no  significant difference could be detected between the tested varieties. According to the results of regression analysis, the positive effect of plant protection could not be substituted by an increase in the N rate in either year. The achievement of higher yields was only possible by a joint intensification of plant protection and N fertilisation. Nevertheless, the use of more efficient chemicals led to a slightly, though not significantly, higher yield, with a lower N requirement. 

  • The roles of mycotoxins in cereal crops production: A comparative study of Hungary and Tanzania
    151-159
    Views:
    137

    Although Hungary and Tanzania's climatic, soil, and technological conditions differ significantly in crop production, cereals crop cultivation is of paramount importance; maize crop dominates the cultivated area (Hungary 1 million ha, Tanzania 3 million ha) both from a feed and food point of view. Unfortunately, in both countries, fungal species (Fusaria, Aspergilli, Penicillia, etc.) that produce various mycotoxins on cereals, including maize grains, are a growing concern. The situation is complicated because these fungal species and their toxins can appear not only on cereals but also on other crops. Despite the prevalence of mycotoxins in both countries, studies show higher exposure risks and contamination above tolerable levels for human consumption in Tanzania to Hungary, with Tanzania observing acute aflatoxicosis.

  • Evaluation of reduced tillage technologies in corn production based on soil and crop analyses
    47-54
    Views:
    123

    Despite new cultivation methods, the proportion of conventionally cultivated land is still very high in Hungary.
    Although these technologies demand more time, labour and fuel, they are still attractive to users because they require less professional skill and simple machinery. In Hungary, conventional tillage methods usually lead to soil deterioration, soil compaction and a decrease in organic content. These side effects have caused gradually strengthening economic and environmental problems.
    The technologies for those plants which are dominant on Hungarian arable lands use (winter wheat, maize, sunflower and barley) need to be improved both in the interest of environmental protection and the reduction of cultivation costs.
    The Department of Land Use at Debrecen University is cooperating with KITE Sc. to carry out soil tillage  experiments at two pilot locations to prove tillage technologies already used in the USA.
    The aim of our examination is to adapt new technological developments and machinery, and to improve them on Hungarian soil for local environmental conditions. With these improved machines, the field growing of plants could be executed by less manipulation and better suited to economic and environmental needs. The most significant task is to investigate and improve the conventional cultivation replacing, new soil-protecting tillage technologies, and to apply no-till and mulch tillage systems.
    On the basis of the experiments’ survey data, we established that the looseness and moisture content of the soil using reduced tillage is more favourable than after using conventional technologies. The results of no-till and shallow spring tillage are behind those of winter plough or disk ripper cultivation in corn yield and production elements.
    To preserve moisture content in the soil, the ground clearing and sowing while simultaneously performing no-till method presents the most favourable results. The surplus moisture gained using no-till technology is equal to 40 mm precipitation.
    Regarding the yield of winter wheat we established that the tillage methods do not affect plant yield. Both disk ripper and conventional disc cultivation showed nearly the same harvest results (5.55 or 5.5 t/ha), where the difference is statistically hardly verifiable from the no-till method. From the individual production of corn and the number of plants planted in unit area,  calculated results prove that no significant difference can be detected between the production of winter plough and disk ripper technology. Although the yield achieved with the no-till method is less than with the previously mentioned technologies, the difference is only 9-10%. We received the lowest production at shallow spring tillage.
    Evaluations have shown a 1.1 t/ha (13%) difference in the yield of maize, between winter tillage and the disk ripper method, in this case the traditional method resulted in higher yield. In winter tillage, the yield of maize was 1.9-2.1 t/ha (23-25%) higher than in the case of direct sowing and cultivator treatments. No significant difference could be noted between the yields of direct sowing and cultivator treatments.
    Our research so far has proved the industrial application of reduced tillage methods in crop cultivation technologies.

  • Environment-friendly nutrient supply in the area of NYÍRERDŐ Zrt
    111-116
    Views:
    112

    The widespread realization of environmental friendly management is an important segment of seeking sustainable technological and
    technical solutions. The methods ensuring sustainable development by exploiting natural facilities have great significance. Bacteria-based
    biofertilizers and wood ash are good examples of them. Using bacteria-based biofertilizer means a kind of biofertilization that is using the
    possibilities provided by the ecosystem.

  • Heat treatment and microbial digestion of poulty feather for biogas production
    215-219
    Views:
    94

    The aim of this research was the elaboration of the technological parameters of heat pre-treatment and microbial digestion of poultry feathers for biogas production. Feathers were treated at 70, 100, 140 °C, and subsequently digested by Bacillus licheniformis, or keratin disintegrator bacteria. Investigations focused on the optimalization of parameters influencing poultry feather biodegradation. The optimal range of pH, temperature,
    feather size and bacillus:feather ratio were determined in the experiments, as well as the analysis of relationship between the examined parameters. In order to be able to track the dynamics of the biodegradation, we determined the extinction level of the liquid phase of the biodegraded material in the different experimental treatments. The results showed that the rate of hydrolysis was significantly higher in the treatments with bacteria than in the treatments without it. Regarding the pretreatments at 70, 100 and 140 °C, the digestion of feather was the most intensive at 70 °C. The most extensive digestion was observed in case of 1:3 feather:water ratio. The highest intensity of feather digestion was
    detected in the treatment with 1% microbe ratio.  

  • Evaluation of automated anaerobic fermentation processes as in the case of mould infected maize
    81-86
    Views:
    146

    In Hungary the renewable energy utilization is planned to achieve 13% by 2020. Biogas production is one of the fields with the largest energy potential. Achieving high efficiency during continuous production despite the mixed and variable composition of input materials is the most common problem which the newly built biogas plants using agricultural raw materials have to deal with. The first experimental reactors at the Department of Water and Environmental Management were built 12 years ago. Control and automation of the four separated bioreactors were executed with ADVANTECH GENIE 3.0 software which granted pre-programmed measurement and points of intervention for pH, temperature, CH4, CO2, H2S, and NH3. The system became out-of-data, therefore in 2010 it has been redesigned and tested. The system is controlled by Compair Proview SCADA (Supervisory Control and Data Acquisition) software running on Linux platforms. The Fusarium infection caused serious yield-losses in cereal production in 2010. In the case of cereal products, which non-utilizable as forage seems an optimal solution is utilizing as biogas raw material. The raw material was based on the Fusarium infected maize. In the recent publication infotechnological and technological experiences of the pilot test period are evaluated as well as direction of future development is defined.

  • Comparison of apricot cultivars for suitability for organic growing
    63-65
    Views:
    60

    Nowadays, important task is using more widely the environmentally friendly production technologies. There are considerable differences
    among technologies using reduced spray programs (integrated and organic) in plant protection and plant nutrition.
    In this case integrated production has a better position as roles for organic production more strict and due to this fruits has an obvious
    temporal and permanent reduction in tree conditions. Fitotechnical elements and renewal and regeneration of cultivars are important
    factors for offseting or delaying of condition weakening.
    In this study, 5 apricot cultivars (not pruned for 8 years) were compared in their characteristics (assessment of inactive, semi-active and
    active plant parts).
    Our study showed that there were 50-70% differences among observed characteristics. Our study confirmed those cultivars which are
    suitable for organic production and which one more resistant to condition weakening and which one able to tolerate negative technological
    effects.

  • The possibilities and limitations of organic fruit production
    41-45
    Views:
    68

    In this review, direct and indirect technological elements of organic production are discussed. Today, there is a growing interest in production prepared without chemicals. We discuss the following issues: site selection, soil, rootstock and cultivar requirements, plant material, planting distances, crown formation, phytotechical operation, irrigation, soil tillage, soil covering and muchning, nutrition supply. Separate section deals with methods of plant protection.

  • Comparative analysis of inoculated soybean in extinguishing soil
    113-116
    Views:
    195

    In order to achieve higher yields, better technological methods offered in the current market, which aims to help the producers in the realization. To guarantee good yield because more and more people try with a variety of products, but you have to make the expected impact falls short.In this experiment, the following results were obtained: the soil suspension closely related to the inoculum of seed or seed treatment,which affects the soybean nodule formation, core saturation, and yield and protein-oil indicators. The soil suspension composition may exert positive and negative effects, which depend on how bacterial strains inoculum combined on the soybean seed surface. It is shown in our experiment very well, that between inoculum and inoculum as well as inoculum and seed treatment materials may be antagonism which setback to the soybean nodules formation and the yield, but not worsen the protein-oil indicators.