Search
Search Results
-
Using research findings in precision maize production
227-231Views:195The effect of crop production factors on maize yield are examined on chernozem soil in a more than 30 year old long-term experiment on the Látókép Experiment Site of the Centre for Agricultural and Applied Economic Sciences of the University of Debrecen. The aim of research is to evaluate the effect of fertilisation, cultivation, plant number, genorype and irrigation. The analysis of the data in the database of the examined period makes it possible to evaluate the effect of maize yield, as well as that of the crop production factors and the crop year, while the correlations and interactions between these factors were also examined. During the examination of the cultivation treatments, it was concluded that the highest yield was obtained as a result of autumn ploughing, but its effect largely differs in the irrigated and the nonirrigated treatments. Based on our examinations, strip cultivation should be applied periodically (e.g. strip – strip – ploughing – loosening) in areas with favourable soil conditions free from compacted layers.
In years with smaller, average precipitation supply or when the precipitation was higher than average, higher plant numbers were more favourable. Under drier conditions, but especially in several consecutively dry years, a lower plant number can be recommended which is not higher than 60 thousand per hectare. In the case of favourable water supply, 70-80 thousand plants per hectare can be used. The yield increasing effect of fertilisation was significant in the case of both non-irrigated and irrigated conditions, but it was much more moderate in the non-irrigated treatment. The extent of weed coverage was significantly affected by the previous crop. In the case of a favourable previous crop (wheat), the weed coverage was significantly lower than after an unfavourable previous crop (maize). In the case of the same previous crop (maize), the extent of weed coverage was mostly determined by the crop year and the extent of precipitation supply. Irrigation is not enough in itself, because if it was not accompanied by intensive nutrient management, yields started to decline.
The results of researhc, development and innovation contributed to the technological method which makes it possible to apply locally adjusted sowing seed, fertiliser and pesticide in a differentiated way, as well as to change the method of operations within the given plot. -
Effect of noninvasive castration method on weight gain, behavior and meat quality of ram lambs
21-29Views:127In the course of producing heavyweight lambs (above 35 kg), males need to be separated from females at the end of the fattening period. If not, the rams must be castrated because they reach sexual maturity, and their activity bothers the ewes or unwanted pregnancy may occur. The present study surveys if the Hungarian sheep keepers know or use the non-surgical elastrator method for castration and assess the effect of castration (surgical and non-surgical) on daily weight gain, behavior, moving activity, and meat quality of rams, respectively. We found many advantages regarding the use of the elastrator method. Based on the survey results, 100% of farmers who used elastrator had a positive experience and favorable opinion about this method. There is no need to separate the rams, which allows for less area requirement and more economical technological conditions. The traditional castration (with a knife) process is longer (4–6 minutes), and caused longer-lasting stress while the elastrator application is bloodless, took only 20–30 seconds, and were stress-free. The number of steps of ring-gelded individuals was much lower than that of the non-castrated rams. The difference in steps number could also be seen in ewes separated into different ram groups. The weight gains of individuals castrated by the ring were better than the surgically castrated ones and also individuals with testicles. The palatability of the meat from the non-castrated group was less favorable, and the chewiness of the ringed group was the best. Finally, our results highlighted the benefits of the noninvasive elastrator method in animal welfare aspects.
-
Experiment of quality properties of dehydrated fruits
7-15Views:100The lyophilization is the joint application of freezing and drying. It is an up-to-date conserving procedure, the point of which is that the humidity existing in the frozen humid material is transferred from the solid state directly into the gaseous state at a temperature below 0 oC under vacuum. Out of the procedures applied nowadays, this is the most tolerant drying process.
With regard to the high investment and operational costs, freeze drying is applied only for valuable, heat-sensitive materials when the technological aim is to preserve such properties as aroma, taste and colour as well as such components as proteins and vitamins. This procedure is suitable for drying and conserving certain foodstuffs, stimulants, organic chemicals, medicines and similar sensitive and valuable materials.
In our institute, we have been conducting freeze drying experiments with regional fruits and vegetables since the year 2005. During the first phase, we examined the heat- and material transfer as well as the abstraction of humidity, while during the second phase we analysed the rehydration ability and nutrient content of the freeze-dried materials as compared to those dried with the method of convection. Moreover we have conducted penetration measurements with a portable hardness tester.
To sum up the results gained so far, we can state that the quality of the lyophilized materials is better than those dried in the traditional way. It originates partly in the fact that the temperature and pressure applied for the freeze drying are smaller and the drying period is far longer than for the convection drying.
In contrast to convection-dried materials, freeze dried materials set in close to their original water-content, keep their original shape and size after being rehydrated. The reason of it the porous, spongy structure (flexible cell wall) of the lyophilized products which is able to take up moisture quickly. In addition, the lyophilized products can be rehydrated faster than those dried in the traditional way.
Regarding the results of the chemical analyses, the following conclusion can be drawn: the vacuum freeze drying results a small decrease of nutrient content and nutritive value for the lyophilized products.
The results of the hardness tests support the statement that the majority of agricultural materials cannot be considered as an ideal flexible body, because during the experiment the flexibility coefficient changed when going from the surface of the material inwards. In addition, the penetration tests also confirm that the surface of the convection-dried vegetables is at least 1.5-3 times harder than that of the freeze-dried products. The reason of it that it takes place during the drying denaturation processes.
The article summarizes the results of our research work listed above, in accordance with our experiments conducted by using the characteristic fruits (apple, plum) of the Nyírség Region. -
Economics of hail protection net installation in super intensive apple orchards
27-35Views:127The main objective of this study was to determine and organize beneficial and detrimental effects of hail protection nets, and as far as possible to quantify their economic impact. The main factors were determined, through which hail protection nets can affect the costs and incomes of the production, and as their sum the economic result. Considering these factors together with the investment cost and the annual maintenance costs allows the economic evaluation of purchasing of hail protection nets. The analysis was carried out using a deterministic simulation model based on primary data collection from apple producing businesses. Installing hail protection nets as additional technological elements of intensive apple orchards can be concluded by all means as an economic investment – trough their protective effect. However, to achieve really favourable economic indicators, definitely bigger tree height is needed making possible the realisation of around 8.0 t ha-1 extra yield. The main root of this phenomena are obviously the extremely high investment costs of hail protection nets, which result in a large mass of fixed costs during the production period. Therefore the basic economic interest is reaching higher yields and thereby higher profits per unit area.
-
Nutrient deficiency and effects of various nutrition technologies on crop health
109-113Views:212The impacts of climate change on crop production are increasingly noticeable. Extreme weather conditions – such as devastating droughts, which occur more often – have serious effects on crop conditions, thus damaging their defence ability against pathogens and pests. Therefore, in order to achieve high-quality and high yielding crops, it is urgent to elaborate new technologies that improve general condition of crops and prevent development of nutrient diseases. Those crops which suffer from the lack of certain nutrients are more sensitive and their tolerance against diseases are decreased. Nitrogen – as the most influencing macronutrient in yield – is also essential in maintaining crop health. Nevertheless, due to the complicated processes in soil (such as leaching, denitrification), the utilization of nitrogen is not nearly complete, therefore nitrogen stabilizers may be needed to maximize this factor. The use of these stabilizers can be promising where plants with high nitrogen content are grown, although further experiments are needed in which impacts of nitrogen stabilizers on crop protection aspects are examined as well, since there is a close correlation between exaggerated nitrogen fertilizing and sensitivity to pests. During my research I am going to examine the combined effect of foliar fertilizer and nitrogen stabilizer on crop health. Furthermore, my goal is to find clear correlation between pathogens and the different technological variants of nutrition.
-
Information and Communication Technologies in tourism
49-53Views:145Technological progress and tourism have gone hand in hand for years. Information communication technology (ICT) and tourism are two of the most dynamic motivators of the emerging global economy. Tourism can be considered as one of the most profitable sectors of the Hungarian economy, and in rural areas it is often the only successful economic activity.
Development of ICTs and the expansion of the Internet have changed dramatically in the past few decades. This process is noticeable in
Hungary, as well. Platform of tourism increasingly get to the Internet nowadays, which is vitally important because tourism is an information-intense industry. Therefore, it is critical to understand changes in technologies in order to maintain the crucial role of this sector in the Hungarian economy.
The aim of my study is to support the significance of tourism in Hungary and especially in the North Plain Region with the help of statistical data. Then, I try to show how ICTs appear in this sector and emphasize the role of these tools with some concrete examples. -
Advancement of a Common Wheat (Triticum aestivum L.) Selection System
8-11Views:84All the research in Hungary and other countries in Europe focus on improving the quality of crops and increasing the competitiveness of production.
In this respect, we have to advance the conventional technological elements, reduce the application of pesticides and fertilizers, and produce new varieties suitable for environmentally-sound production. In our crop breeding programs, we applied conventional and biotechnological methods (embryo rescue and double haploid methods) in order to get somaclonal and gametoclonal variations.
We produced winter wheat lines (HP-31-95, HP-82-96) by traditional way, which have high baking qualities and high nutrient efficiency. Some diseases can limit the quantity and quality of a wheat crop. We examined several wheat diseases in our winter wheat candidates, and we found that our progenies have resistance to leaf rust.
With respect to a serious problem was the small quantity of applied fertilizers and the other externals, our research focused onto advance a common wheat selection system, with the help of it, we can handle these problems. We have summarized that our selected progenies can compete with the registered varieties with quality and environmental respect. -
The management and economical aspects of GPS based machine-control and tractor-implement sincronisation
161-167Views:193Precision farming has an array of technological equipment, elements and complete systems which are in themselves suitable to create conditions for efficient farming, to reduce environmental load and to provide farmers with optimal return on their investment.
On the leading edge of my research is to introduce the economic benefits of precision logistic optimization with satellite navigation in wheat and maize harvesting. My hypothesis, claiming that a well-organized system can increase the number of working days by 4 days per harvesting season in maize, and 2 days in wheat crop. If the farmer makes contract works for harvesting it means for him 2 or 4 days extra work by using the precision farming technologies with satellite communication system. Overall, as pertains to wheat and maize harvest seasons, yearly revenues can be increased by 7 760 000 HUF. I would like to introduce that the precision technologies increase combine costs by merely 5.4% which can be return in the first year of using.
-
Fruit quality parameters of sweet cherry cultivars produced under rain protected plastic foil and general orchard conditions
66-69Views:78Due to global climate warming, frequency of negative weather effects (rainfall amounts, distribution, sortness) are increasing. Rainfall
amounts and frequency has also great effect of sweet cherry fruit quality around fruit ripening. Determination of optimal technological
basics (such as first class fruit quality and economic value) are an important task in dynamically growing sweet cherry production. This can
be solved with introduction of a new intensive training system. One of the solutions can be rain protecting foil which can reduce fruit
cracking and fruit rot. Without this option sweet cherry can not be grown in many countries. In this study, fruit quality parameters were
compared from a 10 year old intensive (4 x 1m) sweet cherry orchard. The effect of rain protecting foil was tested in comparison with fruits
from not covered tree -
Microbiological status of bulk tank milk and different flavored gomolya cheeses produced by a milk producing and processing plant
73-78Views:228The microbiological quality of milk is important not only for food safety, but it can also influence the quality of dairy products. In this study, our aim was to assess the microbiological status of the bulk milk of a milk-producing farm, and some natural and flavored (garlic, dill, onion) gomolya cheeses made from pasteurized milk produced by their own processing plant. We determined the number of coliform bacteria, Escherichia coli, Staphylococcus aureus, and molds of three milk and eight cheese samples. The tests were conducted between July and September, 2017.
In bulk milk, the mean coliform count was 3.83±0.17 log10 CFU/ml; the mean E. coli count was 1.38±0.14 log10 CFU/ml; the mean mold count was 3.74±1.30 log10 CFU/ml; and the S. aureus count was <1.00 log10 CFU/ml, respectively. The mean coliform count in gomolya cheeses was 3.69±1.00 log10 CFU/g; the mean E. coli count was 2.63±0.58 log10 CFU/g; the mean S. aureus count was 3.69±1.35 log10 CFU/g and the mean mold count was 1.74±0.37 log10 CFU/g. The amount of coliforms detected in different flavored gomolya cheeses were significantly different (P<0.05). More than 10 CFU/g of E. coli was found only in the dill flavored cheeses, and S. aureus was found only in dill (3.66±1.86 log10 CFU/g) and onion (3.71±0.52 log10 CFU/g) flavored gomolya cheeses. Based on the obtained results, it was found that the amount of coliform bacteria and E. coli in bulk milk exceeded the limit set in regulation of the Hungarian Ministry of Health (MoH) 4/1998 (XI. 11.) and the amount of S. aureus was below the limit. For gomolya cheeses, the S. aureus count exceeded the limit. The amount of coliform bacteria remained above the limit in cheeses, except for the garlic flavored gomolya cheese. In cheeses, a larger E. coli count was detected than in the bulk milk, but there is no specific limit for cheeses in the regulation. The mold count exceeded the limit specified in the regulation in cheeses, but a lower value was detected relative to milk.
The results show that, in the case of bulk milk and gomolya cheeses, certain detected quantities exceeded the limit values set forth in regulation of MoH 4/1998 (XI. 11.). The results indicate an inadequate microbiological state of the raw material and the finished products. The reasons for these are due to reduced technological hygiene or the inappropriate handling of raw material and finished products. In this study, we have summarized the results of our preliminary studies, which can provide a basis for further hygiene studies.
-
The Role of the 4M-ECO Agrieconomical Modell in the Crop Cultivation
170-173Views:87Today, c for agricultural use are of ever increasing significance. These provide an opportunity for more accurate planning, and favourably influence the efficiency and economic performance of given enterprise. The relevant literature divides models according to various criteria. The most common is the division between optimising and non-optimising models. Non-optimising models generally endeavour to make the best use of technological lines, machine capacity, while optimising models are used to optimise revenue returns from sales or, occasionally, production costs. In our case, revenue and returns from sales were optimised. The models examined consist of several modules. Which include the following: plant cultivation modules, evaluations (assessment of situation, conception plan, complex corporate evaluation), supplementary sheets (sheets and charts for ancillary plant production, general costs of operation, summary and crops structure optimisation). With the help of the model, annual a particular can be made for an optimal crop structure the resources of the enterprise. This it becomes possible to define the largest net revenue on a corporate level.
-
Agronomic research in Martonvásár, aimed at promoting the efficiency of field crop production
89-93Views:115The effect of crop production factors on the grain yield was analysed on the basis of three-factorial experiments laid out in a split-split-plot design. In the case of maize the studies were made as part of a long-term experiment set up in 1980 on chernozem soil with forest residues, well supplied with N and very well with PK. The effects of five N levels in the main plots and four sowing dates in the subplots were compared in terms of the performance of four medium early hybrids (FAO 200). In the technological adaptation experiments carried out with durum wheat, the N supplies were moderate (2010) or good (2011), while the P and K supplies were good or very good in both years. Six N top-dressing treatments were applied in the main plots and five plant protection treatments in the subplots to test the responses of three varieties.
The results were evaluated using analysis of variance, while correlations between the variables were detected using regression analysis.
The effect of the tested factors on the grain yield was significant in the three-factorial maize experiment despite the annual fluctuations, reflected in extremely variable environmental means. During the given period the effect of N fertilisation surpassed that of the sowing date and the genotype. Regression analysis on the N responses for various sowing dates showed that maize sown in the middle 10 days of April gave the highest yield, but the N rates required to achieve maximum values declined as sowing was delayed.
In the very wet year, the yield of durum wheat was influenced to the greatest extent by the plant protection treatments, while N supplies and the choice of variety were of approximately the same importance. In the favourable year the yielding ability was determined by topdressing and the importance of plant protection dropped to half, while no significant difference could be detected between the tested varieties. According to the results of regression analysis, the positive effect of plant protection could not be substituted by an increase in the N rate in either year. The achievement of higher yields was only possible by a joint intensification of plant protection and N fertilisation. Nevertheless, the use of more efficient chemicals led to a slightly, though not significantly, higher yield, with a lower N requirement. -
The roles of mycotoxins in cereal crops production: A comparative study of Hungary and Tanzania
151-159Views:137Although Hungary and Tanzania's climatic, soil, and technological conditions differ significantly in crop production, cereals crop cultivation is of paramount importance; maize crop dominates the cultivated area (Hungary 1 million ha, Tanzania 3 million ha) both from a feed and food point of view. Unfortunately, in both countries, fungal species (Fusaria, Aspergilli, Penicillia, etc.) that produce various mycotoxins on cereals, including maize grains, are a growing concern. The situation is complicated because these fungal species and their toxins can appear not only on cereals but also on other crops. Despite the prevalence of mycotoxins in both countries, studies show higher exposure risks and contamination above tolerable levels for human consumption in Tanzania to Hungary, with Tanzania observing acute aflatoxicosis.
-
Evaluation of reduced tillage technologies in corn production based on soil and crop analyses
47-54Views:123Despite new cultivation methods, the proportion of conventionally cultivated land is still very high in Hungary.
Although these technologies demand more time, labour and fuel, they are still attractive to users because they require less professional skill and simple machinery. In Hungary, conventional tillage methods usually lead to soil deterioration, soil compaction and a decrease in organic content. These side effects have caused gradually strengthening economic and environmental problems.
The technologies for those plants which are dominant on Hungarian arable lands use (winter wheat, maize, sunflower and barley) need to be improved both in the interest of environmental protection and the reduction of cultivation costs.
The Department of Land Use at Debrecen University is cooperating with KITE Sc. to carry out soil tillage experiments at two pilot locations to prove tillage technologies already used in the USA.
The aim of our examination is to adapt new technological developments and machinery, and to improve them on Hungarian soil for local environmental conditions. With these improved machines, the field growing of plants could be executed by less manipulation and better suited to economic and environmental needs. The most significant task is to investigate and improve the conventional cultivation replacing, new soil-protecting tillage technologies, and to apply no-till and mulch tillage systems.
On the basis of the experiments’ survey data, we established that the looseness and moisture content of the soil using reduced tillage is more favourable than after using conventional technologies. The results of no-till and shallow spring tillage are behind those of winter plough or disk ripper cultivation in corn yield and production elements.
To preserve moisture content in the soil, the ground clearing and sowing while simultaneously performing no-till method presents the most favourable results. The surplus moisture gained using no-till technology is equal to 40 mm precipitation.
Regarding the yield of winter wheat we established that the tillage methods do not affect plant yield. Both disk ripper and conventional disc cultivation showed nearly the same harvest results (5.55 or 5.5 t/ha), where the difference is statistically hardly verifiable from the no-till method. From the individual production of corn and the number of plants planted in unit area, calculated results prove that no significant difference can be detected between the production of winter plough and disk ripper technology. Although the yield achieved with the no-till method is less than with the previously mentioned technologies, the difference is only 9-10%. We received the lowest production at shallow spring tillage.
Evaluations have shown a 1.1 t/ha (13%) difference in the yield of maize, between winter tillage and the disk ripper method, in this case the traditional method resulted in higher yield. In winter tillage, the yield of maize was 1.9-2.1 t/ha (23-25%) higher than in the case of direct sowing and cultivator treatments. No significant difference could be noted between the yields of direct sowing and cultivator treatments.
Our research so far has proved the industrial application of reduced tillage methods in crop cultivation technologies. -
Environment-friendly nutrient supply in the area of NYÍRERDŐ Zrt
111-116Views:112The widespread realization of environmental friendly management is an important segment of seeking sustainable technological and
technical solutions. The methods ensuring sustainable development by exploiting natural facilities have great significance. Bacteria-based
biofertilizers and wood ash are good examples of them. Using bacteria-based biofertilizer means a kind of biofertilization that is using the
possibilities provided by the ecosystem. -
Heat treatment and microbial digestion of poulty feather for biogas production
215-219Views:94The aim of this research was the elaboration of the technological parameters of heat pre-treatment and microbial digestion of poultry feathers for biogas production. Feathers were treated at 70, 100, 140 °C, and subsequently digested by Bacillus licheniformis, or keratin disintegrator bacteria. Investigations focused on the optimalization of parameters influencing poultry feather biodegradation. The optimal range of pH, temperature,
feather size and bacillus:feather ratio were determined in the experiments, as well as the analysis of relationship between the examined parameters. In order to be able to track the dynamics of the biodegradation, we determined the extinction level of the liquid phase of the biodegraded material in the different experimental treatments. The results showed that the rate of hydrolysis was significantly higher in the treatments with bacteria than in the treatments without it. Regarding the pretreatments at 70, 100 and 140 °C, the digestion of feather was the most intensive at 70 °C. The most extensive digestion was observed in case of 1:3 feather:water ratio. The highest intensity of feather digestion was
detected in the treatment with 1% microbe ratio. -
Evaluation of automated anaerobic fermentation processes as in the case of mould infected maize
81-86Views:146In Hungary the renewable energy utilization is planned to achieve 13% by 2020. Biogas production is one of the fields with the largest energy potential. Achieving high efficiency during continuous production despite the mixed and variable composition of input materials is the most common problem which the newly built biogas plants using agricultural raw materials have to deal with. The first experimental reactors at the Department of Water and Environmental Management were built 12 years ago. Control and automation of the four separated bioreactors were executed with ADVANTECH GENIE 3.0 software which granted pre-programmed measurement and points of intervention for pH, temperature, CH4, CO2, H2S, and NH3. The system became out-of-data, therefore in 2010 it has been redesigned and tested. The system is controlled by Compair Proview SCADA (Supervisory Control and Data Acquisition) software running on Linux platforms. The Fusarium infection caused serious yield-losses in cereal production in 2010. In the case of cereal products, which non-utilizable as forage seems an optimal solution is utilizing as biogas raw material. The raw material was based on the Fusarium infected maize. In the recent publication infotechnological and technological experiences of the pilot test period are evaluated as well as direction of future development is defined.
-
Comparison of apricot cultivars for suitability for organic growing
63-65Views:60Nowadays, important task is using more widely the environmentally friendly production technologies. There are considerable differences
among technologies using reduced spray programs (integrated and organic) in plant protection and plant nutrition.
In this case integrated production has a better position as roles for organic production more strict and due to this fruits has an obvious
temporal and permanent reduction in tree conditions. Fitotechnical elements and renewal and regeneration of cultivars are important
factors for offseting or delaying of condition weakening.
In this study, 5 apricot cultivars (not pruned for 8 years) were compared in their characteristics (assessment of inactive, semi-active and
active plant parts).
Our study showed that there were 50-70% differences among observed characteristics. Our study confirmed those cultivars which are
suitable for organic production and which one more resistant to condition weakening and which one able to tolerate negative technological
effects. -
The possibilities and limitations of organic fruit production
41-45Views:68In this review, direct and indirect technological elements of organic production are discussed. Today, there is a growing interest in production prepared without chemicals. We discuss the following issues: site selection, soil, rootstock and cultivar requirements, plant material, planting distances, crown formation, phytotechical operation, irrigation, soil tillage, soil covering and muchning, nutrition supply. Separate section deals with methods of plant protection.
-
Comparative analysis of inoculated soybean in extinguishing soil
113-116Views:195In order to achieve higher yields, better technological methods offered in the current market, which aims to help the producers in the realization. To guarantee good yield because more and more people try with a variety of products, but you have to make the expected impact falls short.In this experiment, the following results were obtained: the soil suspension closely related to the inoculum of seed or seed treatment,which affects the soybean nodule formation, core saturation, and yield and protein-oil indicators. The soil suspension composition may exert positive and negative effects, which depend on how bacterial strains inoculum combined on the soybean seed surface. It is shown in our experiment very well, that between inoculum and inoculum as well as inoculum and seed treatment materials may be antagonism which setback to the soybean nodules formation and the yield, but not worsen the protein-oil indicators.
-
Economic Aspects of Bioethanol Production
30-38Views:67Sustainability and multifunctionality look to be crucial points of the future of developed agriculture. Energy utilization of a part of the available biomass perfectly fits in these expectations. Bioethanol production allows for the substitution of the most expensive and most pollutable energy source, gasoline, by agricultural materials. This article contains a complex evaluation of economic characteristics of this method and calculations for the expectable economic effects of a would-be Hungarian bioethanol program. This essay includes the most important technological knowledge, a comparison between bioethanol and the competitive energy sources (gasoline, biodiesel, MTBE) and the most interesting elements of bioethanol programs operating in foreign countries. Introduced are which participants in the bioethanol chain have financial interests and counter-interests under present economic conditions in the spread of bioethanol by the enumerazation of macro- and micro-economic factors. The statements and consequences are based on my own calculatiosn so I am truly interested in any professional opinion.
-
Development of precision apple production technologies in Institute of Water and Environmental Management
97-101Views:176From the precision agriculture point of view, by the rapid development of the investigated technological elements – global positioning system (GPS), remote sensing (RS), global information system (GIS) – the number of services, which were not available in the past, because of their speed, complexity or price are increasing. The high accuracy high-tech instruments provide opportunity to elaborate several fruit production technologies, which aim is creating and operating water and energy safe quality fruit production systems. To evaluate these possibilities, experience was carried out in the Study and Regional Research Farm of the University of Debrecen near Pallag with the use of a GreenSeeker 505 Hand Held™ Optical Sensor Unit, and its interface the Trimble AgGPS FmX Integrated Display board computer, and a ScanStation C10 laser scanner by Leica. The results show the absolute applicability of these equipments in precision horticulture.
-
Possibilities of mass valuation in land use in Hungary
59-68Views:154Technological development makes it possible to simplify and accelerate decision-making processes by adequately processing and evaluating large volumes of data. Sub-data obtained from large data sets have a very important practical role in asset valuation, forecasting and valuing delineated or difficult-to-map areas, or in the context of portfolio management. Land valuation is a separate segment within asset valuation and it requires a specific methodological approach on behalf of evaluators. In this study, the authors compared the transaction data of arable land and the value of other land use categories. Based on empirical assessments, the authors developed proposals for the fast and cost-effective determination of the value of land use categories other than arable land - mainly meadows and pastures.
-
Applied EDI technologies in food traceability
69-74Views:60Due to globalisation, the new technological developments and the complexity of food supply processes, the European food sector is increasingly becoming more complex. The consumers’ trust in food, triggered and affected by a number of food crises, is low. Today, consumers increasingly expect safe and high quality food and demand information about the origin of their food. Also, economic health of food industry can be greatly affected by food crises; therefore efficient and effective mechanisms are required to assist food industry in tracking and tracing products along the food chain. In this paper we discuss the criteria for efficient and effective traceability system from an IT perspective (mainly data exchange) and we identify key requirements for ICT enabled traceability.
-
Energy use – in terms of efficiency
61-66Views:148In the recent decades it has become apparent that the human race can lead to a polluting and energy- wasting lifestyle and the depletion of natural resources and an ecological disaster as well.
Energy efficiency is the realization of the chance to see a wider use of renewable energy. Renewable energy sources can be found in large quantities in Europe. A proper exploitation of these would be important because of the "traditional" energy sources’s sate is very critical in many ways.
The utilization of renewable energy sources depends on many factors. The local natural conditions significantly determine each country's different renewable energy potentials. I find to be important the natural conditions, such as, solar radiation intensity , the number of sunny days per year, the wind conditions , the volume and their energy characteristics of the geothermal power resources , land features , soil and rock quality, the supply of fossil fuels or the nuclear possibilities of energy production. The economic environment is also a major influencing factor for the utilization of renewables. The conditions of price of fossil fuels (natural gas, oil and coal), the price of nuclear fuel production and other energy costs significantly influence the demand for renewables, as well as the level of subsidy and government tax policy. In addition, the international and national programs, objectives, strategies, subsidies and regulatory measures as well as technological factors can have a significant impact.
In my paper I point out the opportunities of renewable energy should be given to live. Nowadays the positive effects of their use is undisputed. In addition to the environmentally friendly produced energy, we should strive for energy conservation and energy efficiency as well. These expectations appear in practice, which can be directly perceived by citizens, in fact we should live accordingly. Furthermore, the environmentally relevant regulations of living conditions should appear as environmental demands.