Search
Search Results
-
Visual Analysis and Geometric Modeling of Metal Foams
89-92Views:114The development of an efficient procedure for 3D modelling and finite element simulation of metal foams
is one of the greatest challenges to engineer researchers nowadays. Creating 3D CAD model is alone a demanding
engineering task due to its extremely complex geometry, and the proper finite element analysis process is still in the
center of the research. The aim of this project is to analyze the related literature and to adapt the results may be
considered. -
Simulation of a Quadcopter with LabVIEW
46-49Views:104The aim of the paper was to create a LabVIEW-based Real-Time embedded system supported development environment, which was used for the Real-Time kinematics and dynamics simulation of a quad copter as well as the adherent state-feedback controller. The state-feedback controller was designed with Linear Quadratic Regulator (LQR) based method.
-
Maintenance from the Work Safety Point of View
190-196Views:137Deterioration of the technical condition of plant equipment is a common phenomenon nowadays. According to the experience of authorities, all this contributes to the occurrence of malfunctions and accidents. Plants that operate with an inadequate conservation strategy are now nearing the end of their design life, thus posing an increased accident risk. Aging processes are often accelerated by the operator's underestimation of the effects of equipment stress and the extent of deterioration mechanisms, and the consequent inadequate design and operation of condition monitoring and maintenance procedures. The aim of our work is to examine trends in the light of modern maintenance optimization methods and, in connection with this, to make proposals for the optimization of maintenance scheduling for employers.
-
Conemporary Danish Architecture- Humanity and Rationality
6-10Views:149In my study I have examined the characteristics of contemporary Danish architecture and the way how they formed. In Denmark, there is strongly rooted social atmosphere. The architectural efforts strongly reflects the social problems every time, considering the environmental aspects. The regionalist methods appear in the architecture, because of this the different architectural styles appear specific way. Self-reflective and analytical way the Danish architects try to answer the contemporary issues, even more emphasize the human factor.
-
Maintenance of Electric and Hybrid Vehicles
37-46Views:505An electric car is a vehicle powered by one or more electric engines, utilizing energy stored within batteries that are rechargeable. The first register of a usable electrical vehicle dates from 1880s. A hybrid vehicle incorporates two or more different power types, including, e.g., gasoline engines and electric motor. The goal in this work is to present the overall overview of the structure of the electric, hybrid and electric-hybrid vehicles, advantages and disadvantages of these types, the main points to focus when maintaining these and the challenges involved in its production and maintenance.
-
Fémhabstruktúrák elemzése és geometriai modellezése
145-152Views:145The development of an efficient procedure for 3D modelling and finite element simulation of metal foams is one of the greatest challenges to engineer researchers nowadays. Creating 3D CAD model is alone a demanding engineering task due to its extremely complex geometry, and the proper finite element analysis process is still in the center of the research. The aim of this project is to analyze the related literature and to adapt the results may be considered
-
Vibration Measurement of a Screening Machine
116-123Views:171In this paper we use linear vibration approach to make a model of a horizontal vibration screen, which can be applied at gravel pit in order to perform separation operation of the wet gravel particles. The model can produce the natural frequencies of the system, which are useful in the adjustment of the angular velocity of the vibration exciter. A laser triangulation unit is well applicable to measure peak-to-peak amplitude of the working vibration screen. Comparison has been performed between the results of the simulation and the measurements.
-
The CAD Modelling Possibilities of Gear Pairs by Two Ways in the Mechanical Engineering Practice
205-219Views:151The GearTeq 2021 software is a complex gear designer software which is capable to design different types of gears based on the initial geometric parameters by the user. Naturally, the users’ appropriate knowledge for the gear theorem and the manufacturing technology is indispensable for the design. The possibilities of the software are shown in this publication. The designed gear pairs are usable for different engineering fields (robots, working machines, vehicles, etc.).
-
Price Analysis Practices in the Pig Sector
1-12Views:114The analysis of sales prices has become a particularly important topic in pig production research, including statistical analysis. With globalisation, we can say that today we are talking about a sector constantly exposed to the effects of the world market. It is also worth pointing out that, compared with other sectors, the impact of external regulation and influence is less pronounced. Thus, the aim of the present research was to identify the journal articles published on the subject of price analysis and, on the basis of these, to establish the correlation with the methodologies often used. It examines the spatial location of price analysis. The results obtained show that the practice of price analysis is mainly carried out in the context of market leading countries, usually on the basis of a cross product chain issue. The research shows the emergence in recent years of increasingly sophisticated methodologies that allow more accurate conclusions to be drawn, while also facilitating planning from a practical point of view.
-
Laboratory investigation of the rediffusion of contaminants originated from the aquiclude
232-238Views:115Many organic pollutants are released into the soil and thus into the groundwater due to anthropogenic effects (a chain of harmful human activities). Layers with low permeability (e.g. clay) play an important role in blocking the path of these contamintants. However, due to their sorption and diffusion properties, such aquiclude layers can also serve as long-term sources of contamination. Once the layer is contaminated, it is already very difficult to recultivate, and there is a potential for the pollutant to spread to higher permeability layers by slow diffusion processes. This phenomenon is defined as a so-called rediffusion process, in which contaminants are retransferred from the aquiclude to the layer with higher permeability. The purpose of this study is to demonstrate the possibility of modeling this rediffusion process in a laboratory scale and to quantify the effect of influencing parameters on pollutant transport.
-
Investigation on Double Oxide Film Initiated Pore Formation in Aluminum Casting Alloys
141-153Views:363The most common, and in fact, the most deleterious defects of aluminum casting alloys are the so-called double oxide films or bifilms, which have a central role in porosity formation, as they can easily unfurl and inflate into pores during the solidification of the alloys. Sr addition is generally used in the foundry industry for the modification of the eutectic Si phase of hypoeutectic Al-Si alloys. However, Sr microalloying usually leads to an increased pore formation tendency. As bifilms are preferred sites for pore formation, it should be expected that Sr additions have a significant effect on the number and/or the structure of double oxide films present in the melt. In this work, the relationship between Sr-concentration and the susceptibility to pore formation has been investigated through the evaluation of melt quality of melts which had different levels of Sr. The bifilm content of the melts was investigated by the analysis of K-mold specimens and X-ray computed tomography (CT) of reduced pressure test (RPT) samples. It was found that liquid alloys with a higher Sr concentration had a significantly greater tendency to pore formation, which can be explained by the presence of a larger number of bifilm defects in the liquid alloy.
-
Local Annealing of Cold Rolled Aluminum Sheets by LASER Treatment
21-26Views:134LASER treatment widely used in material processing technologies. The annealing is not the typical application of the LASER treatment, but this is possible to apply in case of cold deformed metals. In the article a cold rolled EN AW 8006 aluminum sheet is annealed by LASER treatment. The microstructure of the annealed sheets is observed by optical microscopy. An existing cellular automata simulation of recrystallization process is modified to study the LASER annealing. The observed microstructure and the simulated results are compared to determine the further development of the developed automaton.
-
Examining the Social Involvement of Sports Civic Organizations
23-34Views:176Analyzing the information available in the Hungarian database of the CSO, we can see that a significant part of the income of classical non-governmental organizations, especially non-governmental organizations with a sports profile, comes mainly from state or private support. In addition, it can be said that these organizations are essentially non-profit-oriented and play a significant role in social integration and the performance of essential social tasks. Therefore, the relevant question is to what extent and in what way their social embeddedness is realized, in what way do NGOs influence people in the course of their operation? Within this, the study of the social usefulness of sports non-governmental organizations and the sphere of support conditions in the sphere emerges as a priority area. In our study, we undertake to examine the activity of the organizations included in the survey, their social impact and to compare the results with their role in local society. Nearly 50% of the NGOs surveyed in the study have a local scope, and more than 50% typically engage in grassroots and leisure-related activities.
-
Néhány választott egyéni sportág jelenlegi helyzetének és versenyképességének elemzése Magyarországon
1-20Views:791In the past few years, our country increased importance of sports. 2010 was highlighted in 16 individual sports, which receive state subsidies for the period 2013-2020. In this research we selected the four disciplines of sports - canoeing, modern pentathlon, wrestling, judo - I examined the domestic situation and competitiveness. The sports competitiveness investigated on the basis of their role in the media occupied, according to the method of the International Olympic Committee (IOC). The IOC and the Olympic Games Organising Committee (OCOG) mediation from the proceeds distributed to sports, by way of support. I think it is important to examine the competitiveness of sports, and international jótapasztalatokat used later to propose solutions to increase viewing figures. The first stage of this research, which shows the position of sports Hungary, explore their differences and draw parallels between the similarities.
-
Opportunities to the urban air quality of characterization by the cost-effective electrochemical sensors
1-16Views:100The quality of urban is more and more affected by the accelerating urbanization. The efficiency of improving air quality can be increased by providing local information on each pollutant source. The aim of our activity is providing real-time high-spatial reasultion data about air quality of the Hungarian capital city, Budapest. In this paper, results of testing and calibration of different low-cost electrochemical sensors and localization of them are represented. The first selected sensor is suitable for detecting carbon dioxide (CO2), alcohols, benzene (C6H6), nitrogen oxides (NOx) and ammonia (NH3). The RingAir initiative also aims to involve the urban population in active environmental monitoring activities, therefore in the future we are planning to implement a more detailed and continuously updated monitoring system with the participation of a Budapest bicycle courier service and some of the city's population.
-
Potentiodynamic Study of the Effects of Nickel on The Electrodeposition of Zinc from Chloride Media
15-24Views:139Abstract. The potentiodynamic experiments of the nickel effects on the zinc electrodeposition have been done to understand the impact of Ni impurities on the electrowinning of Zn from spent pickling liquor. The nickel chloride solutions of Ni concentrations 90 and 1 g/dm3 were used as the electrolytes. The latter was also mixed with 90 g/dm3 Zn in the experiments. All the runs were carried out at room temperature with 40 mV/s continuous polarization speed and with 1/s sampling rate. It was observed that nickel electrodeposition from chloride media containing 90 g/dm3 Ni started with the generation of hydrogen bubbles, entirely blocking the cathode surface. Only a slight current development was observed until the polarization potential ~ -0,8 V. The visual observation showed bubbles also formed at the anode, which may represent chlorine and/or oxygen evolution. While, in the electrodeposition of nickel with only 1 g/dm3 Ni concentration in the electrolyte, metal deposition was hardly observed, but visible hydrogen bubbles constantly blocked the cathode surface. A similar tendency was observed in the mixed-solution electrolysis cell; the initial tiny bubbles accumulated at the cathode surface more than in the pure Zn solution. The enhancement of H2 evolution indicates how nickel deposition may contribute to the loss of useful current in the process of Zn electrodeposition. The mass of nickel deposited from the mixed solutions significantly decreases as the Ni concentration decreases in the electrolyte, while the mass of deposited zinc is relatively constant. It means that the purity of the produced Zn is appreciably higher – with respect to Ni – if nickel is efficiently eliminated from the solution before electrowinning.
-
Polylactic Acid as a Potential Alternatives of Traditional Plastic Packagings in Food Industry
123-129Views:372Huge quantity of synthetic polymers is used as packaging materials in different fields of food industries. A significant part of these polymers applied as a primary, direct food contact construction. The scoped application area is the sweet industry. In this field Polystyrol (PS), Polypropylene (PP) and Polyethylene terephthalate (PET) have used but during the last fifteen years the usage of PET has been grown. In one hand the price of this material is efficient, form other hand the PET is the one of the most safe (for food industrial applications) petrol chemical plastic that can be used as primary or secondary food contact packaging material. To maximize the customer safety and minimize the environmental impact of traditional PET, a new bio-sourced and bio-degradable alternative polymer aimed to be used in this special food industrial segment. One of the potential alternatives is the Polylactic acid (PLA) that would be a possible substitute as it is compostable and produced from renewable sources and has good physical and mechanical properties [1].
-
Gamification in the field of human resource, a creative solution for recruitment
373-382Views:665With the introduction of latest tools and the expansion of technological solutions, the usage of smartphones ,with instant internet connection of course, has become an essential part of the net generation, also known as generation Z. At the same time, the role of IoT devices has also become part of our daily lives, completing and sometimes making it easier. This is due to the fact that the tools become more and more cheaper as time passes and parents and young people no longer consider these a technical innovations, but as a necessity. These generations; Y, Z and Alpha appear simultaneously on today's job market, which poses a serious challenge to future HR leaders and recruiters. Because of the generational gap between them, both motivational and demanding, novel solutions are becoming increasingly appreciated in this area as well. The purpose of this study is to demonstrate the potential of gamification and to highlight the its major areas, as well as to draw the attention to "good practices" in creative recruiting through better known examples. In addition, I also tried to point out the effect on the relationship between motivation and flow-experience. The gamification method is becoming more and more popular in our country, as it plays an increasingly important role in business and education as well. In recent years, with the use of serious games, there have been several examples of HR recruitment and selection, which clearly strives to reach out to younger generations.
-
Review of Drive Systems Applied in Modern Vehicles
728-732Views:198In this publication we review the drive systems of modern electric and hybrid vehicles. We also discuss the various types of electric motors, batteries, as well as fuel cell systems applied in them. Furthermore, as an important part of hybrid vehicles is the internal combustion engine, we review the literature about the methods used to.
-
The Effect of MMS Lubrication on Surface Roughness During Machining
452-457Views:91I display this paper the chipping front metal of cutting allocated geometric, considering particular the friction. I catch the attention energy's balance sheet someday metal of cutting, open one new direction the manufacture technology. I display this new direction's metal of cutting condition. but built I delineate his paper final division this new policy searching programme, consumed trial instruments as well as the evaluation's mode.
-
The Use of Additive Manufacturing for Wind Tunnel Simulations
62-71Views:154The current economical situation requires aircraft operators to start organizing their activity in the direction of carbon neutrality using innovative solutions.
The goal of present study is to desing a brand new wingtip device using 3D printing which helps reducing aerodynamical drag, leading to fuel efficiency and less carbon emission with its innovative shape.
-
Parallel Data Acquisition and Processing with Paspberry Pi Clusters
40-45Views:138Computer network was built from Raspberry Pis, what can solve research task in the filed of building mechatronics. According to the results, it can state the cluster built from Raspberry Pis, can process indoor sensor data effectively
-
Optimizing the combustion processes of a small scale solid fuel-fired boiler
358-369Views:144Over the last decade, the public has been paying increasing attention to reducing greenhouse gas and acid rain emissions and reducing particulate matter, which is extremely harmful to health and the environment. To improve air quality, the European Commission has achieved a range of measures to reduce air pollutant emissions in the transport, heat and electricity, industrial and agricultural sectors. In Hungary, the amount of gas and solid air pollutants from solid fuel combustion used by the public during the heating season represents a significant percentage of the total amount present in the atmosphere. In 2016, taking into the total emission, the 29% of CO2 emissions; 85% of CO emissions; 75% of the particulate matter emissions and 21% of the NOx emissions were derived from households. It follows that the improvement of air quality can also be achieved by controlling the emissions of solid fuel combustion plants. During our research we aimed to optimize the operation of a newly purchased TOTYA S18 boiler and a pilot pellet boiler. Operating the boilers in the correct mode minimizes air pollutant emissions, and the greater part of the heat generated is actually turns to heating the home, as with poor settings, a lot of heat leaves through the chimney. The data obtained during the tests can also be used to determine whether the boilers comply with the emission values set out in Commission Regulation (EU) 2015/1185.
-
The Empirical Examination of Different Customer Types
92-100Views:157The proper knowledge of customer types is essential for a well functioning company – regardless of its size. In current research we wanted to identify and characterize the particular customer groups with involving 302 persons. During the examination we measured the attitudes of these participants with the help of a statement range based on Kotler’s classical customer types. For the identification we made factor- and cluster analysis, and we could separate five different factors. They received the names of Angry, Definite, Discursive Passive, Experience Shopping and Indefinite - based on some related statements. After the cluster analysis – along these factors - we could separate four different groups: Young Impulse Shoppers, Outspoken Definites, Negatives and Born Customers. Each and every group requires different communication, sales attitude and service morals.
-
Development of a Low-cost Pressure Sensor
33-38Views:236In this paper development of a pressure sensor has been discussed. The main benefit of this sensor is relatively cheap compared to commercially available ones. The unit contains a beam type load cell and a pneumatic cylinder. The load cell has 4 strain gauges in Wheatstone bridge configuration in order to convert the change of resistance into measurable voltage. The system is well applicable in numerous circumstances, where digital pressure signal is necessary for control or data acquisition.
