Potentiodynamic Study of the Effects of Nickel on The Electrodeposition of Zinc from Chloride Media
https://doi.org/10.21791/IJEMS.2023.2.2.
Authors
View
Keywords
License
Copyright (c) 2023 Hanna Zakiyya, Tamás Kékesi
This work is licensed under a Creative Commons Attribution 4.0 International License.
How To Cite
Abstract
Abstract. The potentiodynamic experiments of the nickel effects on the zinc electrodeposition have been done to understand the impact of Ni impurities on the electrowinning of Zn from spent pickling liquor. The nickel chloride solutions of Ni concentrations 90 and 1 g/dm3 were used as the electrolytes. The latter was also mixed with 90 g/dm3 Zn in the experiments. All the runs were carried out at room temperature with 40 mV/s continuous polarization speed and with 1/s sampling rate. It was observed that nickel electrodeposition from chloride media containing 90 g/dm3 Ni started with the generation of hydrogen bubbles, entirely blocking the cathode surface. Only a slight current development was observed until the polarization potential ~ -0,8 V. The visual observation showed bubbles also formed at the anode, which may represent chlorine and/or oxygen evolution. While, in the electrodeposition of nickel with only 1 g/dm3 Ni concentration in the electrolyte, metal deposition was hardly observed, but visible hydrogen bubbles constantly blocked the cathode surface. A similar tendency was observed in the mixed-solution electrolysis cell; the initial tiny bubbles accumulated at the cathode surface more than in the pure Zn solution. The enhancement of H2 evolution indicates how nickel deposition may contribute to the loss of useful current in the process of Zn electrodeposition. The mass of nickel deposited from the mixed solutions significantly decreases as the Ni concentration decreases in the electrolyte, while the mass of deposited zinc is relatively constant. It means that the purity of the produced Zn is appreciably higher – with respect to Ni – if nickel is efficiently eliminated from the solution before electrowinning.
References
- L. Pietrelli, S. Ferro and M. Vocciante, “Raw material recovery from spent hydrochloric acid-based galvanizing wastewater,” Chemical Engineering, vol. 341, pp. 539-546, 2017.
- M. Regel-Rosocka and M. Wisniewski, “Selective removal of zinc(II) from spent pickling solution in the presence of iron ions with phosphonium ionic liquid cyphos IL 101,” Hydrometallurgy, vol. 110, no. 1-4, pp. 85-90, 2011.
- A. Agrawal and K. Sahu, “An overview of the recovery of acid from spent acidic solution from steel and electroplating industries,” Journal of Hazardous Materials, vol. 171, no. 1-3, pp. 61-75, 2009.
- M. Gracia-Gabaldon, J. Carrillo-Abad, E. Ortega-Navarro and V. Perez-Herranz, “Electrochemical study of simulated spent pickling solution,” International Journal of Electrochemical Science, vol. 6, no. 2, pp. 506-519, 2011.
- M. Regel-Rosocka, “A review on methods of regeneration of spent pickling solution from steel processing,” Journal of hazardous material, vol. 177, pp. 57-69, 2010.
- K. H Lum, G. W Stevens and S. E Kentish, “Development of a process for the recovery of zinc sulphate from hot-dip galvanizing spent pickling liquor via two solvent extraction steps,” Hydrometallurgy, vol. 142, pp. 108-115, 2014.
- U. Kerney, “Treatment of spent pickling acids from hot dip galvanising,” Resources, Conservation and Recycling, vol. 10, pp. 145-151, 1994.
- G. Csicsovszki, T. Kekesi and T. I. Torok, “Selective recovery of Yn and Fe from spent pickling solutions by the combination of anion exchange and membrane electrowinning techniques,” Hydrometallurgy, vol. 77, pp. 19-28, 2005.
- I. Ortiz, E. Bringas, M. Fresnedo Sn Roman and A. Miren Urtiaga, “Selective separation of zinc and iron from spent pickling solutions by membrane-based solven extraction: process viability,” Separation Science and Technology, vol. 39, no. 10, pp. 2441-2455, 2004.
- A. Arguillarena, M. Margallo, A. Arruti-Fernandez, J. Pinedo, P. Gomez and A. Urtiga, “Scale-up of membrane-based zinc recovery from spent pickling acids of hot-dip galvanizing,” Membranes, vol. 10, p. 444, 2020.
- J. Carrillo-Abad, M. Gracia-Gabaldon and V. Perez-Herranz, “Study of the zinc ewcovery from spent pickling bath by means of electrochemical membrane reactor using a cation-exchange membrane under galvanostatic control,” Separation and Purification Technology, vol. 6, no. 2, pp. 506-519, 2014.
- F. Sa, C. Su, E. Ghali and G. Houlachi, “The effect of lead and some operating parameters on cathode contamination during zinc electrowinning,” Hydrometallurgy, vol. 171, pp. 69-76, 2017.
- G. Hodjaoglu and I. Ivanov, “Zinc recovery from sulphate electrolytes, containing copper and ferrous ions,” Bulgarian Chemical Communication, vol. 43, no. 1, pp. 37-41, 2011.
- Y. Stefanov and I. Ivanov, “The influence of nickel ions and triethylbenzylammonium chloride on the electrowinning of zinc from sulphate electrolytes containing manganese ion,” Hydrometallurgy, vol. 64, pp. 193-203, 2002.
- M. Sider and D. L. Piron, “The effects of metallic impurities and 2-butyne-1,4-diol on zinc electrowinning from chloride solutions,” Journal of Applied Electrochemistry, vol. 18, pp. 54-61, 1988.
