Search
Search Results
-
Influence of nitrogen fertilisation on the technological quality of wheat
47-55Views:47Wheat is one of the most grown crops around the world. Its primary use is in the production of bread, bakery, and confectionery. The provision of essential nutrients, mainly nitrogen, plays a pivotal role in the growth and development of wheat. The wheat varieties used in the experiment are Alfold and Mv. Menrot. The rates of nitrogen used in the experiment are: 0, 200, 400, 600, 800, and 1000 kg N ha-1. The aim of this study is to evaluate the effect of nitrogen fertilisation on technological quality of wheat and to find the appropriate fertiliser rate to reduce pollution. The results indicate that nitrogen fertilisation did not show a significant effect on thousand kernel weight and test weight. However, nitrogen fertilisation significantly affected protein content, gluten content, Zeleny sedimentation index, and the falling number. The higher the nitrogen fertilisation the better the technological quality parameters of the wheat. The protein content, gluten content, Zeleny sedimentation index and the falling number were the lowest at 0 kg N ha-1 followed by 200 kg N ha-1 then 400 kg N ha-1 and the highest at 600 kg N ha-1.
-
Changes in the Diaporthe helianthi Infection of Sunflower Hybrids Between 1998 and 2002
214-233Views:66Plant protection, and especially the efficiency of protection against mycosis, is a very important production technological element concerning sunflower. The efficiency of production can be increased on the basis of a thorough pathological survey and its results carried out in a wide variety of hybrids, as the features of hybrids, the reactions of genetic bases to pathogens can be found out under domestic conditions.
The tests were carried out at variety-test lots of OMMI for hybrids used for food or oil and other sunflower varieties admitted by the state at the Experimental Site DTTI Látókép, Centre of Agricultural Sciences, University of Debrecen between 1998 and 2002. The number of the tested hybrids was 49 in 1998, 45 in 1999, 49 in 2000, 55 in 2001, and 44 in 2002.
Due to the infection source of high amounts remained from 1997 and the favourable weather conditions for the pathogens, an infection of high degree was experienced in the tested stands. The lowest infection index in the hybrids with a very short vegetative period was experienced with Beni hybrids. Comparing to the average of the hybridgroup with short vegetative period, a low infection index characterised the Baleno, Trident, IBH-166, Hysun 321, Resia, Alexandra, Cergold and Pixel hybrids. In 1999, among hybrids with medium vegetative period, Zoltán, Zsuzsa and Util hybrids could be highlighted because of their low infection index. In 1998, among confentionary hybrids, Marica-2 hybrid had the most favourable index values (2,55).
During our trials, the experienced infection dynamics were compared in the event of hybrids with higher and lower susceptibility under different sowing technological elements. The results call for the fact that when a hybrid with higher susceptibility is produced, production technological elements, such as the time of sowing, influence considerably the damage caused by the pathogen, therefore it must not be ignored when its determination takes place. In the event of hybrids with lower susceptibility the change of the tested production technological elements within the biological optimum does not lead to the increased risk of the damage caused by Diaporthe helianthi. -
Economic questions of precision maize production on chernozem soil
293-296Views:122It is one of the main topical objective to establish the conditions of sustainable farming. The sustainable development in crop production also calls for the harmony of satisfying human needs and providing the protection of environmental and natural resources; therefore, the maximum consideratio of production site endowments, the common implementation of production needs and environmental protection aims, the minimum load on the environment and economicalness. Precision farmin encompasses the farming method which is adjusted to the given production site, the changing technology in a given plot, the integrated crop protection, cutting edge technologies, remote sensing, GIS, geostatistics, the change
of the mechanisation of crop production, and the application of information technology novelties in crop production. Modern technology increases efficiency and reduces costs. The efficiency of crop production increases by reducing losses and the farmer has access to a better decision support information technology system. In addition, we consider it necessary to examine the two currently most important economic issues: “is it worth it?” and “how much does it cost?”. During the analysis of agricultural technologies, we used the precision crop production experiment database of KITE Zrt. and the Institute for Land Utilisation, Regional Development and Technology of the Centre for Agricultural and Applied Economic Sciences of the University of Debrecen.
During our analytical work, we examined three technological alternatives on two soil types (chernozem and meadow). The first technology is the currently used autumn ploughing cultivation. We extended our analyses to the economic evaluation of satellite navigationassisted ploughing and strip till systems which prefer moisture saving. On chernozem soil, of the satellite-based technological alternatives, the autumn ploughing cultivation provided higher income than strip till. In years with average precipitation supply, we recommend the precision autumn ploughing technological alternative on chernozem soils in the future. On meadow soil, the strip till cultivation technology has more favourable economical results than the autumn ploughing. On soils with high plasticity – considering the high time and energy demand of cultivation and the short amoung of time available for cultivation – we recommend to use strip till technologies. -
Will there be a horticultural triangle (cluster)? Thoughts about the reconstruction of the Hungarian horticulture between two European regions
21-27Views:99The authors of this study seek the answer to the question how to develop, in the first decade or decades of the 21st century, the university-level
horticultural scientific training, the horticultural innovation and the scientific co-operation between companies and universities in Debrecen and
in the North Great Plain Region and – in a wider sense – in Hungary to a standard being competitive even in European terms. With the synthesis
of the prospects of past, present and future, they drew the following conclusions. The reconstruction of agriculture, horticulture and food industry
is a part of reforming Hungary's countryside. Horticulture, producing high added value, will be able to decisively contribute to the plan whereas
the value presently produced in an agriculturally cultivated area of 1,000 euros/hectare can reach 2,000 to 3,000 euros in the next two decades.
A necessary and indispensable precondition to achieving this is the strengthening of the innovation output of the Hungarian horticultural sector.
Despite the numerous technical criticisms formulated in connection with the serious problems of Hungarian agricultural and horticultural
scientific innovation, no progress has been made in this field for the past one and a half decade. The scientific research of this topic hardly
continued or did not continue at all, the up-to-date surveys and in-depth analyses were missing. The objective, basic principles and tasks of the
Act CXXXIV of 2004 (TTI) enacted concerning research-development and technological innovation are clear and progressive. The co-operation
between the National Research Technology Office and the Hungarian Academy of Sciences, the setting up of the Innovation Fund are heartening
opportunities. These – along with the new Higher Education Bill to be passed – may as well be suitable for restarting the Hungarian agricultural
and horticultural scientific innovation. In our opinion, this requires a new, well-considered national agricultural programme, which can be
conceived in the framework of the "Ferenc Entz National Horticultural Plan" proposed by us for horticulture. In the most eastern Hungarian
university knowledge centre, at the University of Debrecen, the continuing of the horticultural scientific innovation strategy started in the last
decade may be the focal point and generator of the development of the so-called "Hungarian Horticultural Triangle”, or "Hungarian
Horticultural Cluster". This region comprises the Northern and Southern Great Plain Regions and the area between the Danube and Tisza
Rivers. Here, about 70 to 75% of the total Hungarian horticultural commodity stock is produced. The objective of the HORT-INNOTECH
DEBRECEN programme planned in 2004 by the University of Debrecen, Centre of Agricultural Science is to establish the horticultural scientific
research-development and technological innovation structure and knowledge base of the Hungarian Horticultural Triangle / Hungarian
Horticultural Cluster. In harmony with this, the objectives are to bring about competitive, new horticultural products, to improve the conditions
of utilising them, to enhance the competitiveness of enterprises based on technological innovation, to make use of the research-development and
innovation opportunities available in the regions in an efficient manner, to as full extent as possible, to encourage the creation of places of
employment producing high added value in the field of horticulture, to improve the technical skills of those employed in horticultural researchdevelopment and to promote their enhanced recognition by the society. -
The influence of climatic conditions of the harvest year on the wheat quality
23-25Views:120Technological potential of wheat bread depends on the variety, manner and type of fertilizer, irrigation conditions and climatic conditions in their absence. This study was done on two varieties of wheat grown in Bihor county in a place with identical fertilization conditions, for two different years: year 2014 can be characterized by a greater quantity of rainfall during the wheat vegetation period and the year 2015 can be characterized by a drought during the growing wheat on the subject of the study. In the study was examined whether climatic conditions have any influence on the technological potential of wheat, not taking into account the data on quantity produced per hectare in the years studied.
-
Researches on the quick method of sugar productivity evaluation
26-29Views:63In a sugar factory it is necessary to be able to calculate very quickly the sugar productivity possible to obtain by processing the beet
having a certain technological quality. That is the reason why, in the following lines, it is presented a very quick method used by the Institute of
Alimentary Chemistry, the laboratory for sugar research and engineering, for such kind of quick calculations, but with a high theoretical and
practical precision. -
Mobile Internet Usage Possibilities and Requirement in Agriculture
394-402Views:63In this paper, I looked at the mobile Internet from technological, economical and sociological aspects and then pointed to several agricultural possibilities for theri usage. Examining the effects and driving forces of mobile communication, I can say that it is a very complex system. The social connections of mobile communication and the arising problems show that it affects several areas of everyday life. By looking at the business processes, all costs, advantages and disadvantages can be seen clearly. Overview the mobile Internet from the technological aspect and I discuss related technology and applicable utilities, as well as two possibilities for using wireless Internet: 3G and WiFi. Among the possible usages, I gave several examples to give an impression of all the diverse possibilities this technology offers. There are some really useful applications in customer service, precision farming, transport, agriculture and food industry. Finally, I talked about the mobile Internet in Hungary and in the other EU countries.
-
The European Research Area: in quest of the Lisbon goals
73-79Views:68strong educational and scientific knowledge basie is one of Europe's traditional key assets that has made it possible for our continent to become world class in several research fields. Despite these great achievements, the position of the European research and technological development (RTD) potential is currently being challenged by a rapidly changing global competition, including the two main rivals, the US and Japan. The European Union (EU) is behind these countries as regards research and innovation output. Moreover, European research is faced with the
implications of globalisation of markets and industries, digitalisation and new technologies, as well as a need to address societal issues such as an ageing population or climate change.
At the same time, the European Union (EU) is facing the uneven distribution of RTD capacities and excellence within its own borders, especially the EU12 countries are lagging behind in this
respect.
In order to meet this twofold challenge the EU has to step up its efforts for the creation of a legitimate "European Research Area" that will make the EU more competitive on the international scene, and also encourage the less developed EU member states to invest more and better into research and innovation. -
Economic questions of maize production on different soil types
289-292Views:103The requirements and objective of cultivation are in constant change. For example, different cultivation systems are developed for the purpose of soil protection, the preservation of its moisture content and on soils with various precipitation supply or production site conditions. Traditionally, one of the most important cultivation aims is crop needs. Further cost saving in fertilisation and crop protection can only be achieved by reducing the quality and quantity of production or it cannot be achieved at all. Furthermore, the costs can be significantly reduced by means of the rationalisation of cultivation. Energy and working time demand can also be notably reduced if ploughing is left out from the conventional tillage method. The key requirement of economicalness is to perform the cultivation at the optimal date, moisture level and the lowest possible cost.
Within production costs, the cost of cultivation is between 3–17%, while they are between 8–36% within machinery costs. It is the vital condition the usability of each technological method to progressively reduce costs. Our evaluation work was carried out with the consideration of the yield data obtained from cooperating farms and the experiment database of the Institute for Land Utilisation, Regional Development and Technology of the Centre for Agricultural and Applied Economic Sciences of the University of Debrecen. Three technological methods (ploughing, heavy cultivator and loosening tillage) were used on several soil types which differ from in terms of cultivability (chernozem, sandy and sandy clay soils) from the economic/economical aspect. We examined the sectoral cost/income relation of maize production as an indicator plant. The maize price during the analytical period was 45 thousand HUF per t. On chernozem soils, the production of maize can be carried out on high income level, while maize production on sandy soils has a huge risk factor. The role of cultivation is the highest on high plasicity soils, since they have a huge energy
demand and the there is a short amount of time available for each procedure in most cases. -
Comparision of growth of mature all-female and mixed-sex Common carp (Cyprinus carpio L.) stocks in RAS
65-68Views:422The common carp (Cyprinus carpio L.) is the most important fish species in Hungary, it is more than 70% of the total Hungarian fish production. The common carp production is important not only just in Hungary but in Middle-East Europe, as well as Southeast Asia. Majority of the production comes from fishpond culture. If the production sector wants to meet the increasing customer demands, there is need to intensify research on the intensive fish production opportunities for example all-female common carp technologies. The all-female technology is one of a genom-manipulation technology. Its production showed better growth rate than mixed-sex population in pond culture. Our experiment combined the recirculation aquaculture system (RAS) and the all-female common carp stocks intensification technologies. The reason for the experiment, is that there are no result about the growth of all-female common carp growth in RAS.
The experiment used the „Tatai grey scale type” common carp stocks. We propagated two all-female stocks (T2 and T3) and a control group (TK). Due to technological characteristics of RAS, the water quality parameters were the same for all treatments and corresponded to the technological tolerance of common carp.
The experimental period was from July 10, 2019 – November 20, 2019. Result of growth performance showed that the growth of mixed-sex stock was significantly higher than all-female stocks; (Control=3692.0±590.5g, T2=3438.8±415.4g, T3=3294.1±659.1g). Feed conversation ratio (Control=1.3±0.1 T2=1.5±0.2 T3=1.6±0.5) and SGR% (Control=0.8±0.0 T2=0.7±0.1 T3=0.7±0.1) were similar.
By the results it can be said the all-female common carp technology has neither advantages nor disadvantages compared to the mixed-sex stock. The all-female technology can be beneficial if the consumers need female common carps. It is worth continuing the experiment and examine how the stocks will perform above 3kg body weight.
-
Correlation of pruning time and fruiting part differentiation of sweet cherry cultivars
131-134Views:66There are several extended studies in sweet cherry production in Hungary and all over the world i.e. for creation and maintainence of smaller tree crown and high density orchards. The use of suitable dwarf rootstocks for this fruit species are very limited. On one hand, most of the draf rootstocks do not cause enough growth reduction and on the other hand these rootstocks are get old very quikcly and their fruits become small, and therefore, they not serve the requirements for intensification. In summary, there is a need for those rootstock which are vital, regeneration enhanching and delay ageing. Due to ensuring above features, Prunus mahaleb is still an obvious solution for intesive production. Increasing intensification can be obtained by use of modernisation of technological elements and suitable cultivar choice.
According to this increasement of intensity through application of novel technological elements (timing, manner and severity of pruning) and selection of the proper cultivar is implement able. Important differences are experienced between sweet cherry cultivars in their growth attributes, light demand and dynamics of fall back in regenerative potencial of different aged wood parts. From this point knowledge of the abow detailed is very important in order to maintain rentability of already established plantations. Our work shows the formation of production part in
9-year old plantation with spike spindle and free spindle crown forms depending on pruning timing (winter, summer) and determining of their various effects. -
Economics of broiler fattening in Hungary
171-180Views:84The purpose of this study is to present economic circumstances of Hungarian broiler sector based on secondary data after brief introduction of international and home situations. Then it analyzes costs, revenues and profit relationships of producers, which has competitive efficiency indicators and high standard production based on a model created on the basis of primary data.
The paper confirms the Hungarian poultry sector international competitiveness falling. One important reason of this situation is the low profitability in the sector, which is typical of both farms produce under worse efficiency indicators and high standard producers. Beside lack of technological standards and efficiency, adverse trend of output and input price – mainly feed price – impact low profitability.
Realization of technological developments and improvements according to international tendency, which affect directly or indirectly the efficiency and costs of broiler fattening are determining in point of realizable profit -
Impact of fertilization on production capacity and reaction to fertilization in maize hybrids
42-46Views:67New varieties and fertilization have significantly increased yields of maize in recent decades. It has to be taken into account however that the interactions and the balanced combination of cropping factors (ecological, biological and agrotechnical) are the main factors which determine yields. Weather conditions were rather unfavourable during the last decade. Extreme weather conditions occurred due to global warming; 6 of 10 years were plagued by drought. Consequently yields increased from 10-20% to 30-50%. In view of varieties the situation is advantageous, maybe the supply of hybrids is too high, nevertheless those hybrids need to be selected which are particularly well adjusted to the ecological conditions. Many technologies can be applied which vary according to intensity, but the balanced combination of cropping factors should be secured on the basis of the hybrid’s intensity. Among agrotechnical factors the compensation of nutrients and technological conditions were inadequate. These days farmers only use nitrogenous fertilizers consequently they significantly decrease the easily available P and K content of the soil which in long term leads to the deterioration of the soil’s productivity. The technological background is therefore important, because sufficient yields can only be expected if agrotechnical operations are carried out in the right time and quality.
-
Research on seeding agents to effect the sugar crystallization
30-33Views:69The quality of sugar is the decisive factor in ensuring the sugar commercializing through the conservation of old markets and
expansion towards new markets. The sugar quality is also the key element which determines the price maintenance in according with the
expenditures performed or even the diminution of the price as a consequence of the quality lessening. -
Harmonic development and biodiesel
91-95Views:76An increased expansion of renewable resources and biodiesel is observed and prognosed, since fossile energy resources are about to run out. Hungary achieved outstanding sunflower years in the recent years in worldwide comparison. In the future, the feedstock of biodiesel production can also be rape besides sunflower.
According to the concept of harmonious development, the balance between nature, society, economy and human environments is represented by their mutual presumptive character. Research and development need to be aligned into this system. Our aim was to examine the advantages and
disadvantages of biodiesel production in different environments, using a model to do so. In order to maintain the harmony, the existing resources have to be managed properly, taking the correlations of the system into consideration. Targeted technological developments are necessary, similarly to the improvement of energy safety and efficiency. -
Technological development of sustainable maize production
83-88Views:144In our research we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of maize.
The experiment took place in Hajdúszoboszló on chernozem soil, on a nearly eight ha field. The size of one plot was 206 m2, this it was a half-industrial experiment. We tested six hybrids with different genetic characteristics and growing seasons. I analysed the correlation between the nutrient supply and the yield of maize hybrids with control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. Yield increasing effect of the fertilizer also depended on the number of plants per hectare at a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants per ha.
In Hajdúszoboszló, in 2016 the amount of rainfall from January to October was 605 mm, which was more than the average of 30 years by 160 mm. The yield of hybrids without fertilization changed between 9.63–11.6 t ha-1 depending on the number of plants.
The six tested hybrids is 10.65 t ha-1 in the average of the stand density of 60, 70 and 80 thousand plants per hectare without fertilization, while it is 12.24 t ha-1 with N80+PK fertilizer treatment. That increase in the yield is 1.6 t ha-1, it is significant.
Da Sonka hybrid is sensitive to weather, it is able to produce 6 t ha-1 additional yield in case of favourable condition. However, it has a low stress tolerance. The most stable yields were observed at Kamaria and Pioneer hybrids. The effect of vintage is also an important factor on the yield. In average, the yield of maize was 6.81 t ha-1 in 2015, which was a drought year and 11.86 t ha-1 in 2016 that was a favourable year. -
Technological and Technical Issues of Efficient Nutrient Supply
43-46Views:59Efficient plant production requires modern production technologies, including a nutrient supply of a scientific basis. The harmonic nutrient supply of quality products that are required by market demands can be produced by the optimal combination of a compound system of requirements. These requirements are partly preparatory (soil investigations, yield measurements, preparation of digital field maps) and are partly based on the knowledge of the most significant characteristics of the applied nutrients. Most artificial fertilizers are applied by spinning disc fertilizer spreaders all over the world, therefore, it is advisable to use them in Hungary as well. Importantly, these machines should be well adjustable, capable of the exact measurement and control of the spread quantity, as well as of even spreading. My report has investigated only the most significant technical requirements affecting the even application of nutrients.
-
Horticulture applicability of 3D laser scanner
75-78Views:156As a result of the technological development, remote sensing instruments and methods have become widespread in all segments of life (from precision agriculture through architecture to medicine). Among the innovative development of remote sensing instruments the 3D laser scanner is overriding importance. The horticulture applicability of terrestrial laser scanning technique is innovation in the precision agriculture, because it could be determine the structure of trees and branches, the canopy extension, which can help to recognize some biophysical parameters. The examination was carried out with Leica ScanStation C10 terrestrial laser scanner in the Study and Regional Research Farm of the University of Debrecen near Pallag. In this article I present the measuring principle, the parameters and horticulture applicability of the terrestrial laser scanner.
-
Yield table for selected black locust (Robinia pseudoacacia L.) cultivars
193-198Views:159In Hungary, the black locust (Robinia pseudoacacia L.) can be considered as the most important fast-growing, stand-forming introduced tree species. Due to its positive growing technological characteristics as well as wood utilization possibilities, at the present, black locust is the most widely planted tree species in Hungary, covering 25% of the country’s total forest area. One of the important tasks ahead of Hungarian black locust growers is to improve the quality of black locust stands with introducing selected cultivars. For the estimation of the growth rate and yield a numerical yield table has been constructed on the basis of surveys of the experimental plots established in pure,managed ’Nyirségi’ ,’Üllői’ and ’Jászkiséri’ black locust cultivars’ plantations which can be suitable for sawlogs production. In the course of 56 stand surveys the key stand characteristics were measured, and then, were reconsidered the average height, diameter (DBH), volume, basal area and stem number given separately for the main (remaining), secondary (removal) and total stands per hectare. The programmable editing procedure allows to extention and formal change of information content of the yield table according to different demands.
-
How can we determine the expected prices for lambs? – Analysis of the Hungarian and Italian lamb prices
59-67Views:65The Hungarian sheep sector has become a one-market sector, almost the whole amount of slaughter lamb went to Italy, which increased its defenselessness. In addition to the sole Italian market showing a permanent demand for Hungarian lambs, it would worth to exploit possibilities in other European markets considering the seasonal differences in Italian prices. Such markets can be the Spanish and Greek for ”light” and the French, German and English markets for ”heavy” lambs. Both the Italian and Hungarian prices have three major periods: Easter, Ferragusto and Christmas. Due to the changes in the prices, the producers often suffer great losses, therefore, the temporal adaptation of production, market research, technological and development activities need to be improved. It is important that the living of Hungarian sheep breeders should not be dependent solely upon the Italian market, distribution of products should be ensured in other markets too, so that the safety of sales be increased and higher prices and higher income could be achieved. The European lamb prices are characterized by large seasonal fluctuation and the degree and timing of changes are different in the different countries. Study of the literature and the results obtained in my study on lamb sales called for an analysis and study of the possibilities of price forecasting. In my study, I performed a forecasting of lamb prices in Hungary and Italy for the period between 1996 and 2006 based on the data of the European Committee. Among the forecasting methods, seasonal decomposition and SARIMA models are the most precise, producers can achieve a better market position by using these in the practice.
-
Technological development of sustainable maize production and its effect on yield stability
379-388Views:156In 2015 and 2016, we examined the effect of NPK nutrients, sowing date and plant density on yield on typical meadow soil. The amount of precipitation was 282.0 mm in 2015 (January–September), 706.0 mm in 2016 and the 30-year averageis 445.8 mm.Agrotechnical factors:– Experiment a)5 Dow AgroSciences hybrid with three sowing dates and three plant densities– Experiment b)In 2015 eight, in 2016 ten hybrids with different genetic characteristics and growing seasons, with control (without fertilization), N80+PK and N160+PKtreatments, five plant densities (50–90 thousand) with 10 thousand plants difference between the different densities.
In a drought year, we reached the higher yield in the earlier sowing date and with the lower lower plant density of 70 thousand plants ha-1-. The maximum yield, depending on the agrotechnical factors, was 10–12 t ha-1 in 2015, while in 2016 it was 14–16 t ha-1. Yield stability can be increased using hybrid-specific cultivation techniques. -
Electronic Tools for English Language Education (with a special view to English for Specific Purposes)
19-22Views:65Almost simultaneously with the developments in information technology over the past fifteen to twenty years, literacy has gained new dimensions. To be considered literate in our age demands functional, academic, critical and technological skills. Because language and technology are inseparable in this context, technology as a means for developing literacy skills must be an integral part of the language class.
This paper examines some of the ways electronic tools can be of use in developing student language literacy competences, with a special emphasis on the benefits learners of English for Specific Purposes can reap. -
The examination of poultry feather digestility for biogas production
113-118Views:68The aim of this research was the elaboration of the technological parameters of biological digestion and biogas production from poultry feather produced in large quantities by slaughterhouses. Feather protein was digested by Bacillus licheniformis, keratin desintegrator bacteria. Investigations focused on the optimalization of parameters influencing poultry feather biodegradation. The optimal range of pH, temperature, feather size and bacillus:feather ratio were determined in the experiments as well as the analysis of relationship between the examined parameters. In order to be able to track the dinamics of the biodegradation, we determined the extintion level of the liquid phase of the biodegraded material in the different experimental treatments. The results showed that the rate of hydrolisis was significantly higher in the treatments with bacteria than in the treatments without it. The most extensive digestion were observed in case of 1:3 feather:water ratio. The highest intensity of feather digestion were detected in the treatment with 1% microbe ratio.
-
Comparative analisis of different canopy forms of sweet cherry cultivars
19-22Views:127The Hungarian sweet cherry production has been changed significantly in the last decades, which primarily resulted in growing intensity of the orchards. Due to the favourable selling prices of the sweet cherry many growers see good prospects in this fruit. One of the key questions of their success is the choice of the most proper canopy form according to the growing conditions, which facilities the efficient completion of annual technological operations.
In new orchards almost exclusively variations of spindle canopies are established, although many other crown forms are used all over the world. From the point of the domestic sweet cherry production it is indispensable to get information about these canopies, and compare with the prevailing crown forms with central axis.
In our experiment we compared free spindle and bush canopies in the Horticultural Experimental Farm of the University of Debrecen in 2013. According to our results it can be stated that the bush canopy can be described with more balanced growth, which makes easier to maintain the vegetative and generative balance. Another positive characteristic of the bush canopy is, that the height of the trees is smaller with 50% compared with the free spindle, which makes the pruning and the harvest easier.
-
Physical and chemical treatment of poultry feather from the slaughter-house
51-56Views:65The 15-20% of the by-products of meat – and poultry industry – that unsuitable for human consumption – contains keratin. The slaughter technology of poultry produces large amount of poultry feather with 50-70% moisture content. This means more million tons annually worldwide (Williams et al., 1991; Hegedűs et al., 1998). The keratin content of feather can be difficulty digested, so physical, chemical and/or biological pretreatment is needed in practice, which has to be set according to the utilization method.
Our applied treatments were based on biogas production, which is a possible utilization method. In the IFA (TULLN) Environmental Biotechnology Institute the feather was homogenized, and – according to the previous examinations – the most effective 1:2 feather-distilled water ratio or 1% NaOH-solution was used, and then treated with microwave (70, 130, 160 °C) during 1 hour time period. DM% and oDM% content was analyzed in the original samples, and the pH, Carbon-, Nitrogen-content in the output, too. Based on the received correlation coefficients (R) and related significance values (Sig.) I concluded, that the C-, N-content and the pH values weren’t influenced by any of the additives. The temperature
affected all three tested factors. The temperature showed a strong coherency with the N-content and the pH value when distilled water was used and weak-medium coherency with the Carboncontent. With NaOH-solution treatment the temperature gave strong coherency with the C- and N-content, as well as medium coherency with the pH. Our objective was to determine the method with effectively the pre-treating of poultry feather for biogas production or composting and to prepare of the treated samples for N and C analyzing. Our next aims will be the elaboration of the technological parameters of heat pre-treatment and microbial digestion of poultry feather for biogas production.