Search
Search Results
-
Calculating possibility of the leaf area index of apple and pear trees
229-233Views:163A significant proportion of the aboveground green and dry weight of the plant constitutes the foliage. The canopy is an important factor of plant growth. On one hand the canopy absorbs the solar energy, which is necessary for the photosynthesis, on the other hand accumulates the absorbed nutrients by the roots, and the most of the water-loss happens through the foliages. The determination of the full canopy is not an easy target. In our research we developed a measurement method to determine the leaf area. With the parameters of the examined tree (leaf length and maximum width) and the data of ADC AM 100 leaf area scanner we determined the k-value, with which we can easily and fast evaluate the leaf surface.
-
Texture analysis as a method for grape berry characterization
Views:269The marketability of table grapes is mainly characterized by berry size, color, taste and texture. Mechanical measurements of table grape berries could provide objective information on the textural qualities of grape berries. In addition, this method might be suitable to study the effects of phytotechnical methods (such as girdling) on table grape quality. The aim of this preliminary work was to demonstrate how instrumental testing could be used to examine the effects of girdling on berry grape texture and define the textural characteristics of table grape berries. Cane girdling was carried out at veraison in two table grape varieties. Texture analysis was performed several times during the maturity. Besides this examination another five varieties were analyzed to assess their berry mechanical properties. Double compression test was used to determine berry hardness and its derived parameters. Puncture test was applied to evaluate skin hardness, skin elasticity and skin break energy. Skin thickness was also investigated. Berry hardness, skin hardness and skin thickness of the girdled grapevines were significantly affected by this technique. Most of the textural parameters showed differences among the seven cultivars.
-
Survey on energetic short rotation forestry systems – Possibilities of spatial development and job creation
7-11Views:89Both the European and the Hungarian rural areas suffer multi dimensional problems. Beside infrastructural under development the most important difficulty is employment. Unemployment is significant in the rural areas, while other structural characteristics like education, profession, work circumstances and seasonality worsen this unfavourable situation. It can be stated that the challenge with the highest priority in rural and spatial
development is to create jobs and to strengthen local employment. The authors examine the job generating possibilities of energetic biomass of agricultural origin in a structural point of view. The aim is to develop spatial biomass product line models that permanently support the raise of employment by utilizing the possibilities of the European Union support policy and the popularity of this branch. -
Nutritive value of Timothy (Phleum pratense L.) during primary growth in 2005
61-67Views:140In this paper we analysed the change of the chemical composition and nutritive value of Timothy observed during the spring of 2005. The nutritive value of Timothy was observed between the end of April and the beginning of June relating to the following parameters: crude protein, crude fibre, crude fat, ash, N-free extract, net-energy growth, net-energy lactation, net-energy maintenance, Metabolizable Protein Energy dependent, Metabolizable Protein N-dependent. We also analysed whether a relationship between the environmental factors that affect the
growing period of grasses and the chemical composition can be detected or not. While testing for correlation, the number of days from 1st January, the amount of heat accumulation, solar radiation and rainfall were considered as independent coefficients.
For the estimation of weather conditions we calculated the climate index. The observed year can be described as a year with a rainfall above the average and abundant solar radiation. A correlation can be detected between the change of parameters of nutritive value and the quality of the current year. In 2005 the result of the analysis of nutritive value was showed a significance difference with respect to each chemical composition at the rate of P<0.001 depending on the time when the samples were taken.
According to the outlined data it can be stated that the change of the value of crude protein and ash show decreasing tendency agreeing the research literature. In parallel with the change of nutritive value, the amount of crude fibre and N-free extract increased. However, the value of Net-Energy maintenance showed an alteration only in the first half of the observed period. The same alteration tendency can be detected in the Net-Energy growth and the Net-Energy lactation. -
Biofuel production and its quality standards
137-141Views:130The increasing consumption due to the decreasing amount of fossile energy resources, as well as the increasing fuel prices and living standard will justify the better utilisation of the opportunities lying in biofuel production. Certain countries produce biofuels for their own use or they even export them. However, there are countries which have not decided which feedstock and technology to use. Biofuel – mainly biodiesel and bioethanol – use greatly contributes to environmental protection, decreased CO2 emission and reduced greenhouse effect.
-
Economic questions of precision maize production on chernozem soil
293-296Views:132It is one of the main topical objective to establish the conditions of sustainable farming. The sustainable development in crop production also calls for the harmony of satisfying human needs and providing the protection of environmental and natural resources; therefore, the maximum consideratio of production site endowments, the common implementation of production needs and environmental protection aims, the minimum load on the environment and economicalness. Precision farmin encompasses the farming method which is adjusted to the given production site, the changing technology in a given plot, the integrated crop protection, cutting edge technologies, remote sensing, GIS, geostatistics, the change
of the mechanisation of crop production, and the application of information technology novelties in crop production. Modern technology increases efficiency and reduces costs. The efficiency of crop production increases by reducing losses and the farmer has access to a better decision support information technology system. In addition, we consider it necessary to examine the two currently most important economic issues: “is it worth it?” and “how much does it cost?”. During the analysis of agricultural technologies, we used the precision crop production experiment database of KITE Zrt. and the Institute for Land Utilisation, Regional Development and Technology of the Centre for Agricultural and Applied Economic Sciences of the University of Debrecen.
During our analytical work, we examined three technological alternatives on two soil types (chernozem and meadow). The first technology is the currently used autumn ploughing cultivation. We extended our analyses to the economic evaluation of satellite navigationassisted ploughing and strip till systems which prefer moisture saving. On chernozem soil, of the satellite-based technological alternatives, the autumn ploughing cultivation provided higher income than strip till. In years with average precipitation supply, we recommend the precision autumn ploughing technological alternative on chernozem soils in the future. On meadow soil, the strip till cultivation technology has more favourable economical results than the autumn ploughing. On soils with high plasticity – considering the high time and energy demand of cultivation and the short amoung of time available for cultivation – we recommend to use strip till technologies. -
Examination of compost maturity using reflectance
29-34Views:209Composting is one of the most popular recycling processes for organic waste. Composting plays an important role in waste and by-product management and is becoming increasingly important in both sustainable energy management and circular economy. Composting transforms organic matter to produce a safe and stable by-product (compost) that can be applied to arable land in a similar way to fertilizer. Physical, chemical and biological methods can be used to monitor the process and to determine the maturity of the compost, as spectrometric/spectroscopic methods play an important role in the analysis of different environmental samples.
Our aim was to (1) non-destructively detect the effects of different additive ratios on the spectral properties of the composting process and the spectral data of different compost mixtures, (2) to find the wavelength ranges of the reflectance curve (inflection points) sensitive to compost maturity, (3) to determine the correlation between the inflection points and the chemical and physical parameters measured in compost by conventional methods.
The mixture of broiler and hen manure and zeolite was composted 62 days in windrow composting. In the composting experiment, the moisture content and temperature (°C) were measured every three days and compost samples were taken and in 10% destillated aquaeous suspension were measured the pH and electrical conductivity (mS cm-1). Compost samples dried to mass stability were spectrally analyzed in the wavelength range 400–1000 nm with AvaSpec 2048 spectrometer.
Based on the results, the reflectance of mature compost were smaller in the last days of composting than the reflectance values of day 0 samples, thus compost maturity can be detected spectral in the VIS-NIR wavelength range. For the tested compost prisms, the reflectance of each sampling day shows a constant slope, with a significant overlap of the reflectance curves up to 400–700 nm wavelength range, and there was a breakpoint in the 700–750 nm wavelength range which was proved by binary encoding.
-
Nutrient Uptake of Miscanthus in vitro Cultures
23-24Views:91The large biomass production and the low necessary input fertilizer make Miscanthus an interesting, potential non-food crop with broad applications, e.g. for fuel and energy, for thatching, fiber production, for the paper and car industries, as well as for ethanol production.
Axillary buds of Miscanthus x giganteus were placed on a shoot inducing nutrient solution (modified Murashige and Skoog, 1962), basic medium supplemented with 0,3 mg l-1 6-Benzylaminopurin. After 40 days of culturing, the axillary buds produced three times more shoots than could normally be harvested. The nutrient content (N, P, K, Ca, Mg) was measured several times during culturing. The results showed that, after 35 days, nitrogen and phosphate were nearly completely taken up. From that time, shoot growth was not observed.
After shoot propagation, the plants were transfered into a nutrient solution for root formation (modified Murashige and Skoog, 1962), basic medium supplemented with 0,5 mg l-1 Indole- 3-Butyric acid, and could be potted in soil after about 14 days. -
Evaluation of technologies and resources from the spatial and social aspect
73-75Views:232The basic functioning of the world is mostly led by negative trends. One of the fundamental reasons for this phenomenon is that the different technologies (hardware, software, resources) do not act properly and in the proper structure by means of the produced products and services. Therefore, the examination of technologies and resources is a key question of our world and development from various aspects. Technologies convey all positive and negative impacts which can be regarded as the fundamental reasons and causes of harmonious or disharmonious development. For this reason, the role of technologies in development and harmonious functioning is of paramount importance.
As a final conclusion, we established that the different technologies (hardware, software, resources) are interpreted as impact conveyors which predominate by means of products and services in a way that their relation system is determined. By using the thermodynamic interpretation which is the basis of the functioning of the world, we built a system consisting of 14 elements to evaluate different technologies, to interpret its functioning and to develop positive interactions and trends.
-
The applied mechanical equipments for wastewater treatment in the észak-Alföld region
171-178Views:168In this study we presented the results of a survey research, which was performed during 2015 at 34 sewage treatment works, operating in Észak-alföld region (Hungary). The survey focused on applied mechanical equipment and works of art of the sewage treatment establishments.
The results of the survey showed that the majority of the examined sites (approx 65%) are working with capacity utilization of 50–100%,merely the 12% of plants was overload. It was found analyzing of specific energy consumption of the sites that the largest value (1.1 kWh per m3) was at the plants with smaller capacity (0–1000 m3 per day). It was clear during the questionnaire processing of the survey that almost all of the works applied activated sludge for sewage treatment The sludge treatment of the sewage plants is conducted by two methods; aerobic- and mixed (anaerobic and aerobic) sludge stabilization. We suggest for the plants with small capacity to use deep aerators, since anachronistic method used the at 3% of the settlements.
-
Development of precision apple production technologies in Institute of Water and Environmental Management
97-101Views:251From the precision agriculture point of view, by the rapid development of the investigated technological elements – global positioning system (GPS), remote sensing (RS), global information system (GIS) – the number of services, which were not available in the past, because of their speed, complexity or price are increasing. The high accuracy high-tech instruments provide opportunity to elaborate several fruit production technologies, which aim is creating and operating water and energy safe quality fruit production systems. To evaluate these possibilities, experience was carried out in the Study and Regional Research Farm of the University of Debrecen near Pallag with the use of a GreenSeeker 505 Hand Held™ Optical Sensor Unit, and its interface the Trimble AgGPS FmX Integrated Display board computer, and a ScanStation C10 laser scanner by Leica. The results show the absolute applicability of these equipments in precision horticulture.
-
The examination of the profit-making capacity of the wooden chip-based large-scale product path
21-26Views:139Heating with wooden chips would provide a significantly cheaper energy production alternative for the local governments in heating their facilities and in district heating as well. The raw material should be available in the appropriate quality, quantity and at the right time. This type of heating requires the well-organized and joint work of the forestry, transporting, processing and receiving plants. This activity might be realized in the form of non-profit clusters. In order not to suffer any losses, the participants of the product path should carry out a very careful planning regarding the factors appearing in heating with wood but missing from gas heating. One such critical element is the transportation distance which might make the basically cost-efficient wooden chip-based heating process significantly more expensive.
One of the main findings of my paper is that the transportation distance should be at most 23 kilometers for the wooden chips to be worth (economical) using against gas. From the viewpoint of practical use, this can be interpreted as the distance between the forestry and heatproducing units. By determining the constant and varying costs of transporting and chopping and from calculating the initial contribution, I concluded that the profit-making capacity of the product path would be sufficient for an energy-related investment. According to my calculations, by remaining within the economical transporting distance of 23 kilometers, such long-term savings might be achieved compared to gas heating which would partly cover the establishment of a biomass-based power plant or heating plant.
-
Effects of ingredients and processing conditions on the quality frozen dough bread made from diferent wheat flour
115-120Views:79A laboratory scale no-time frozen dough procedure that approximates Romanian commercial practice has been
developed and used to study the effects of ingredients and processing conditions on the bread quality of a straight
grade wheat flour during prolonged storage (2 days to 26 weeks). All treatments (baking absorption level, mixing
energy input, mixer type, fermentation and intermediate proof times, removal of oxidant and/or dough
strengthening conditioners and partial freeze-thaw cycles) had significant effects (P<0.05) upon bread quality (loaf
volume and/or bread score). In general, these effects were more pronounced with extended frozen storage time.
High baking absorption, undermixing, bulk fermentation (> 1 h) and removal of oxidant and/or surfactants had
the most dramatic effects. Addition of a very strong flour at 30% to strengthen the wheat flour had no significant
effect (P>0.05) upon bread quality under optimum conditions. -
The effect of compost made of sheep manure on the first cut of a semi-natural grassland
25-29Views:228In an experiment, two types of compost were tested on natural grassland in order to improve the productivity of a natural sward on solonetz soil. Both composts were made of on-farm produced sheep manure, but the second one was enriched in phosphorus. These fertilizers/composts are officially authorized and can be applied in organic farming. Zero application and three rates of fertilizer were tested (10 t ha-1, 20 t ha-1, 30 t ha-1) on 30 m2 experimental plots wit four replications. Dry matter, crude protein and net energy content for maintenance were measured and determined and their yields per unit area were calculated. We found that all the treated plots produced significantly higher yield than the control ones, and in some cases the yields were almost three times higher. However, the optimal compost dose varied, depending on the examined parameter. Based on the evaluation of the experiment results along with rainfall data, it was concluded that, with higher precipitation, the positive effect of the compost application was bigger. The difference between the natural and enriched compost is remarkable, but it has to be mentioned that even the natural compost showed good results; therefore, it is also effective in improving the fertility of grassland.
-
Potential use of bamboo in the phytoremediation in of heavy metals: A review
91-97Views:357There are many literature sources focusing on the phytoremediation of woody plants, but there are only few dealing with the phytoremediation of bamboo plants. Phytoremediation technology has the advantages of little disturbance to the environment and low remediation cost. Bamboo mainly exists in tropical and subtropical regions. As an energy plant, bamboo has a fast growth cycle, large biomass, simple cultivation, high economic efficiency, and convenient harvesting, which highlights the advantages of bamboo in phytoremediation. In addition, bamboo plants have good tolerance and uptake ability to heavy metals and have high application potential and development value in uptaking heavy metal contaminated soil. However, due to climate, temperature and other reasons, bamboo cannot be widely planted in most countries. Research status of remediation of heavy metal contaminated soil by bamboo plants is summarized. The feasibility of its application in heavy metal contaminated soil is discussed in this paper. Aiming at the shortcomings of existing research, bamboo plants have a prospect in the field of plant phytoremediation for the future.