Search

Published After
Published Before

Search Results

  • The applied mechanical equipments for wastewater treatment in the észak-Alföld region
    171-178
    Views:
    166

    In this study we presented the results of a survey research, which was performed during 2015 at 34 sewage treatment works, operating in Észak-alföld region (Hungary). The survey focused on applied mechanical equipment and works of art of the sewage treatment establishments.

    The results of the survey showed that the majority of the examined sites (approx 65%) are working with capacity utilization of 50–100%,merely the 12% of plants was overload. It was found analyzing of specific energy consumption of the sites that the largest value (1.1 kWh per m3) was at the plants with smaller capacity (0–1000 m3 per day). It was clear during the questionnaire processing of the survey that almost all of the works applied activated sludge for sewage treatment The sludge treatment of the sewage plants is conducted by two methods; aerobic- and mixed (anaerobic and aerobic) sludge stabilization. We suggest for the plants with small capacity to use deep aerators, since anachronistic method used the at 3% of the settlements.

  • Examination of physical properties of final product and drying properties of combined (convective pre-drying and freeze finish-drying) dehydration method
    5-12
    Views:
    158

    In this study, the effects of freeze drying (FD), hot-air drying (HAD) and combined drying (HAD-FD) on drying characteristics, energy uptake, texture, rehydration and color of carrot were investigated. Results showed that HAD-FD significantly improved the drying time compared with FD under the same operating conditions, and the HAD-FD can reduce the total cost of dehydration. The drying kinetics was described by the Henderson-Pabis and the third degree polynomial models in the case of HAD, FD and HAD-FD. The HAD carrot samples were exhibited shrinkage, case hardening, poor rehydration and brown surface. The FD carrot cubes appeared porous structure, excellent rehydration, soft texture and loose color. The HAD-FD samples were superior to HAD products and was nearer in quality to FD products with respect to appearance, rehydration and surface resistance (texture). Finally, it is concluded that HAD-FD is effective in improving the FD drying rate. However, the combined drying has a small-scale adverse effect on product quality.

  • Experiment of quality properties of dehydrated fruits
    7-15
    Views:
    115

    The lyophilization is the joint application of freezing and drying. It is an up-to-date conserving procedure, the point of which is that the humidity existing in the frozen humid material is transferred from the solid state directly into the gaseous state at a temperature below 0 oC under vacuum. Out of the procedures applied nowadays, this is the most tolerant drying process.
    With regard to the high investment and operational costs, freeze drying is applied only for valuable, heat-sensitive materials when the technological aim is to preserve such properties as aroma, taste and colour as well as such components as proteins and vitamins. This procedure is suitable for drying and conserving certain foodstuffs, stimulants, organic chemicals, medicines and similar sensitive and valuable materials.
    In our institute, we have been conducting freeze drying experiments with regional fruits and vegetables since the year 2005. During the first phase, we examined the heat- and material transfer as well as the abstraction of humidity, while during the second phase we analysed the rehydration ability and nutrient content of the freeze-dried materials as compared to those dried with the method of convection. Moreover we have conducted penetration measurements with a portable hardness tester.
    To sum up the results gained so far, we can state that the quality of the lyophilized materials is better than those dried in the traditional way. It originates partly in the fact that the temperature and pressure applied for the freeze drying are smaller and the drying period is far longer than for the convection drying.
    In contrast to convection-dried materials, freeze dried materials set in close to their original water-content, keep their original shape and size after being rehydrated. The reason of it the porous, spongy structure (flexible cell wall) of the lyophilized products which is able to take up moisture quickly. In addition, the lyophilized products can be rehydrated faster than those dried in the traditional way.
    Regarding the results of the chemical analyses, the following conclusion can be drawn: the vacuum freeze drying results a small decrease of nutrient content and nutritive value for the lyophilized products.
    The results of the hardness tests support the statement that the majority of agricultural materials cannot be considered as an ideal flexible body, because during the experiment the flexibility coefficient changed when going from the surface of the material inwards. In addition, the penetration tests also confirm that the surface of the convection-dried vegetables is at least 1.5-3 times harder than that of the freeze-dried products. The reason of it that it takes place during the drying denaturation processes.
    The article summarizes the results of our research work listed above, in accordance with our experiments conducted by using the characteristic fruits (apple, plum) of the Nyírség Region.