Search
Search Results
-
Mixing Power Requirement Determination in Agitated Drum Using Dimensional Analysis
76-88Views:170The mixing of granular materials in an agitated drum can be characterized by the dimensionless power equation. The equation was created by dimensional analysis, for which the parameters affecting the mixing power requirement were collected based on the literature. The most important of these are the rotational speed, the drum loading factor, the geometric and physical properties of the mixing drum and the granular materials. The dimensionless power equation is used to estimate with reasonable accuracy the Power number within the given range of applicability , which has been validated by measurements. From the Power number, the mixing power requirement of the mixed granular material can be calculated, which can be used as operational data for selecting the mixing motor.
-
Possible ways of IP Commercialisation in the European Higher Education Ecosystem
56-74Views:237Strong links between universities, and companies can play crucial role in promoting taking into practice of ideas that drive the knowledge society, and in raising competitiveness and living standards. In academic terms of IP management, all activities aimed at sharing knowledge generated in research institutions as a knowledge transfer including scientific publishing, conference presentations, collaborative research with external partners, and contract-based clustering activities, such as licensing and spin-offs. In a narrower sense, the IP management means technology transfer is aimed at placing a given technology on the market, and includes any process by which the recovery partner becomes able to produce new products or services. IP with traditional university mission, values, and activities primarily focusing an active university role in entrepreneurship and contracts with private sector for IP commercialization. This paper gives a comprehensive overview about IP management in universities of the European Higher Education System including the following aspects: partnerships (licensing, industry collaborators); IP invention (disclosures, patenting); proof of concept research bridging the gap between lab discoveries and market application (highly innovative R&D to solve practical problems and commercialization research aiming patented technologies towards business exploitations) and commercialization (start-up incubators and strengthening the entrepreneurial attitudes and competencies). The methodology based on secondary research analysing EU, OECD, on-line literature sources and relevant, up-to date statistical data as well. The conclusions and recommendations based on this „desk research” work reflects the authors.
-
The Mechanical Properties of 3D Printed CuZn28 Brass Specimens with Different Orientations
253-259Views:238In this paper, the properties of CuZn28 brass raw material were presented. The 3D printed metal specimens are made from this material with different orientations. Their mechanical properties (tensile strength, yield strength) and elongation were investigated according to MSZ EN 6892-1: 2012 standard. The strength of the different printing directions is analyzed and it is determined which printing direction is the most favourable. Finally, the effect of the different printing directions upon the structure of the material is studied.
-
Innovation, Artificial Intelligence in Contingent Work-Force Management
571-590Views:669In recent years, the global use of contingent workers is rapidly increasing despite the increasing quantity of artificial intelligence applications in business. The question is "how these companies leverage the use of artificial intelligence to enhance contingent workforce's management?". The ideal goal of this paper is to develop a purely conceptual application of innovation, artificial intelligence (AI) adjacent to contingent workforce management(CWM). The researcher used qualitative information gathered from various authors and observations to reinforce the usage of AI. One of the critical tools to integrate with contingent workforce management for reduction of time spent on human resource administrative tasks is AI. There must be a transformation of thinking, accepting positive organizational change, utilization of technology and openness to new technology to foster AI. Along with that, integrating contingent workforce management with AI reduces risks and costs, increases efficiency and quality of work. Innovation and Artificial intelligence have been used in five pillars performance of contingent workforce management to mitigate the challenges associated with it.
-
Formation of Oxide Layers with Femtosecond Laser on Steel Surfaces for Color Marking
174-178Views:215With the appearance of ultrashort pulse lasers, the researchers have begun working on various laser marking technology. Atmospheric heating and ablation of a surface induce laser coloration of metal surfaces. However, their application is still problematic today in the industry. With the appearance of femtosecond pulse lasers, a new concept became available for color marking. This concept is based on the formation of laser-induced periodic surface structures (LIPSS) on metal surfaces. The purpose of this article is to summarize the literature of laser color marking with ultrashort pulse lasers.
-
Determination of Different Parameters to High Strength Steel Clinch Joints by FEA
341-347Views:223In this article the clinched joints were analyzed by finite element method (FEA). The base materials were advanced high strength steels (DP 600, DP 800 and DP 1000). The model validation procedure was done by the DP 600 type of steel sheets; the other two types of steel were only simulated. The goal was to determine the geometrical properties of the joints with different strength steels. The FEA model was the same in every mechanical point of view therefore the results are comparable. The main geometrical parameters of the clinch joints are the neck thickness (tN), the undercut (C), the bottom thickness (tB) and the height of the protrusion (h); these values were compared.
-
Qualitative and Quantitative Analysis of Optical Industry Produced Grey Water, Proposal For Treatment Technology
84-88Views:95Our research we investigated Carl Zeiss Vision Hungary Kft. grey water from laundry. Our research aims to provide the optical industry produced grey water quality and quantity parameters to obtain a comprehensive picture. The quality parameters for additional aim was to test, whether it is worth tut collect grey water produced in the optical industry to the place of origin. Subsequently, the development of a treatment technology that economically it would be valuable for the company. It has been observed that it is not necessary tut collect grey water from washing machines and cleaning machinery, since it is similar to the organic load them. It was based on a financial assessment of the grey water treatment technologies in two technologies: coagulation-flocculation and aerobic bio membran technology. Investment and maintenance costs in respect of the implementation of the aerobic clearly bio membran technology proved to be more economical.
-
Analysis of Vibration During Turning Process of Different Materials
200-205Views:132In this article, we would like to introduce the problems caused by vibrations in case of polymer turning processes. Nowadays there is a lot of research in this topic, to avoid the unnecessary phenomena of vibrations. The two most common methods are the Spindle Speed Variation (SSV), and the Vibration Assisted Machining (VAM). In case of SSV, the CNC machine can increase and decrease the speed of spindle continuously during turning which can significantly reduce the effects of chatter. This method is beneficial for longer workpieces when there is not any support except the chuck. Vibration-assisted machining can be used to minimise the problems caused by vibrations. VAM combines precision machining with small-amplitude tool vibration to improve the fabrication process. It has been applied to some processes ranging from turning, drilling to grinding. Based on the enumerated above we made some trial measurements about the basic vibrations of the turning tool shank. The tests were done on an NCT EUROturn-12B CNC machine which can found in the workshop of our institute. The tested material was Polyamide 6 because this is the most commonly used polymer in the industry. In the future, we would like to test some other basic and composite polymer materials too. The equipment was served by a specialist from SPM Budapest Kft. With these tests, our goal was to make sure that the equipment and the measuring setup are suitable for our future research.
-
The Situation of Digitization in the Hungarian Food Processing Industry
196-209Views:382Thanks to various technologies, such as nanotechnology, the next decades will completely transform the individual production processes and sectors. With the rapid advancement of information technology, the digitalization and automation of industrial processes pose new challenges for food business operators. Hungarian food companies will be able to keep up with their competitors and be the winners for the next decades if they can successfully adopt these technologies. However, this requires a strong focus on digitization, digital strategy, and directing investment, technology change and R&D activities in this direction. Digitization is one of the decisive directions of the future, which is why I felt it essential to study the level of digitization of Hungarian food companies, IT infrastructure and Internet usage, the use, and role of enterprise management systems, decision support and business analysis tools, and business readiness, Industry 4.0 technology change. Based on the 205 evaluable responses to the questionnaire, it can be said that only a tiny proportion of Hungarian food companies have a digital strategy and only a few have digital transformation.
-
Examination of Infrared Tomato Drying
303-309Views:101Tomato is a highly perishable food, thus preservation is required to meet the continuous market demand compared to the unbalanced yearly production peak. The aim of this paper is to show a detailed insight into infraradiation based drying process. Furthermore, to widen the possible usage range of a well-known approximation method for describing the temporal moisture variation in function of process parameters. The mass decrease of tomato slices was examined, in function of specific radiation power, heat source and sample distance, in forced and natural airflow. Based on the results dimensionless moisture ratio change over time was fitted as an exponential function, which may be used in industrial drying process optimization.
-
Physical Internet – a Novel Application Area for Industry 4.0
152-161Views:205The Physical Internet (PI or π) is one of the most decisive ideas for future logistics systems. The idea behind it is to implement logistic systems which apply the principles of Internet information flow. Simultaneously technological innovations of Industry 4.0 have also appeared. Our current research deals with the applicability of the tools of Industry 4.0 technology in the PI system. Following the literature review we analyse the individual technological tools that could improve the functioning of PI components. Subsequently we will detail the usability of a specific Industry 4.0 tool and finally determine the future research steps.
-
Wearable technology usage among students of the University of Debrecen
33-47Views:150The lack of physical activity and the growing prevalence of a sedentary lifestyle are urgent public health problem worldwide. The problem is also typical of the young population, especially university students, who spend most of the day in a sitting position. Technological development is one of the catalysts for the rise of a sedentary lifestyle, nevertheless, thanks to this, many devices have appeared on the market that can be used to encourage physical activity. The widespread of wearable activity tracker devices – wristwatches, wristbands – among the population shows a constantly increasing trend, with a parallel increase in the amount of data collected about ourselves (step count, calories burned, heart rate). The main goal of the present study derives from the recognition of the gap in this field in the domestic sports science literature therefore our focus is on modern information technology tools in the dimension of physical activity. The aim of this study is to assess the attitudes of the university student population towards activity-tracking devices. We conducted a cross-sectional online quantitative survey (questionnaire) among DE GTK students. 340 people filled out the questionnaire correctly. In addition to descriptive statistics, parametric and non-parametric tests (Pearson's chi-square test, Fisher's exact test, t-test, Mann-Whitney test) were used to examine the relationships. The results of the statistical tests were considered significant if p<0.05. We performed the distribution of the variables using the Kolgomorov-Smirnov test. The majority of respondents (55%) have already tried some kind of wearable device that measures physical activity. Every third student (34%) are currently using their device. Those who have not tried these devices so far indicated the price as the primary deterrent. 32% of the students plan to invest in such a device in the future. 39% of device users use an activity tracker bracelet, while 61% use or used a smartwatch. In terms of sex, we did not find any differences in asset ownership. The primary goal of the students (66.8%) was to track their physical activity. The most frequently used function was tracking the number of steps, indicated by 81% of the respondents, followed by heart rate measurement (67%). Most of them (69%) set some kind of goal regarding their number of steps. According to every third student, they moved more as a result of the device and managed to maintain the increased level of physical activity. 44% of the students claimed that their physical activity did not change despite using the device. Students tend to disagree with the positive statements related to the devices in connection with a healthy lifestyle. Although the present study suggests that wearable devices have an impact on students and they track their measured data, it is questionable whether the devices themselves are enough of an incentive for students to develop a healthier lifestyle.
-
Effects of TIG Reheating on Duplex Stainless Steel Weld Microstructure
295-302Views:164Duplex stainless steels (DSS) gaining their excellent mechanical properties and corrosion resistance due to their austenitic-ferritic microstructure, ideally in the same amount. However, to keep this ideal phase ratio during arc welding is very difficult. Generally, the arc welding processes will result in more ferritic microstructure in the weld metal and in the heat affected zone, due to the rapid cooling. The ferritic microstructure can cause chromiumnitride precipitation, because the nitrogen solubility in ferrite phase is very low below 700 °C. These chromiumnitride precipitations can cause loss of corrosion resistance and mechanical properties. However, during subsequent reheating, the chromium-nitrides can dissolve and act as a secondary austenite nucleation site in the ferritic microstructure. In our research we welded DSS specimen autogenously, with tungsten inert gas welding using pure argon and 94 % argon + 6 % nitrogen as shielding gasses. In the first case the sub-sequent solid-state reheating caused 20 % increase in the austenite fraction of the weld metal but with the use of mixed shielding gas only 5 % increase.
-
Increasing the Life of Mulching Tools
414-421Views:133Areas after mining or calamity are not amenable to immediate afforestation and require some adjustment. After removal of wood biomass, the rest of the residue is scattered throughout the area. To modify them, Several methods can be used to remove it. The optimal conditions for the planting environment and the subsequent adaptation process of the planting can be achieved by its mechanical, biological, chemical treatment. The basic prerequisite for a successful renewal of forests is their release from undesirable increases, in some cases from foams (trees) from mining waste. The area is also released when forest nurseries, seed plantations, etc. are established. The main purpose of the release of surfaces is to achieve the maximum throughput of the area for the machines to be moved. They wear during work. Wearing is a permanently undesirable change in the surface due to the interaction of functional surfaces or functional surface and wear medium. A tool that does not have any editing can go into a state where it can no longer be used anymore. An experiment was carried out in which 9 new teeth were placed on the rotor of the crusher and their wear patterns were observed. The article shows the progress of tool wear over time.
-
Simulation modelling in the sizing of city logistics systems – a study for concentrated delivery points
1-11Views:114Nowadays, urban freight traffic is causing significant noise and air pollution, so it is in the focus of green logistics developments, both in technology and system organization. Based on experiences within city logistics, significant problems are caused by the so-called concentrated sets of delivery points, where there are several delivery points with heavy freight traffic in a relatively small area. Since the summer of 2015, we collected lots of data about stores of these delivery points to support the modelling and the simulation of the new green solutions for the examined city logistics systems. Based on our results we can say, there are significant savings in these systems, so it is worth to deal with developing new, gateway-concept-based and consolidation-based solutions.
-
Compliant Mechanisms in Progress and Development Of Modern Technology
186-189Views:131In this paper, the compliant mechanisms will be presented. There will be presented some representative works that have brought progress and development in modern technology. Examples will be presented from simple concepts such as a tweezers, staples, to mechanical clutches, pointer and micro-compliant mechanical structures.
-
Surface Activation of High Impact Polystyrene Substrate Using Dynamic Atmospheric Pressure Plasma
80-87Views:159Over the last decade, the number of researches has increased in the field of bonding technologies. Researchers attempt to improve surface adhesion properties by surface treatments. Adhesive bonding is one of these bonding techniques, where it is important to see what surfaces will be bonded. One such surface property is wetting, which can be improved by several types of surface treatment. In recent years, atmospheric pressure plasmas have appeared, with which research is ongoing on surface treatments. In our research, we will deal with the effects of plasma surface treatment at atmospheric pressure and its measurement. In addition, we summarize the theoretical background of adhesion, surface tension and surface treatment with atmospheric pressure plasma. Our goal is to improve adhesion properties and thus the adhesion quality.
-
Interchange of Heat in Saw Disc Body During Cutting
488-494Views:125The paper presents the experimental results of a research aimed at the distribution of the temperature on the circular saw blade body. The temperature was measured at two distances from the centre of the circular saw blade body (70 mm, 140 mm) by means of an infrared thermometer. Two circular saw blades with the diameter of 350 mm and a variable adjustment of the body (with slots and without the coating, with both slots and coating) were used for the longitudinal sawing of the spruce wood (Picea excelsa) with the thickness of h = 37 mm. Feed speeds ware vf1 = 14 mpm, vf2 = 17 mpm and vf3 = 20 mpm. Cutting revolutions n = 4100 /min. were constant. The measured temperature was in the range from 21 °C till 27 °C. The highest measured temperatures were recorded on the circular saw blade with the slots and coating.
-
Augmented Reality
1-9Views:426This paper is an overview of augmented reality’s basic concepts and its connection to the logistics field. The paper includes a brief history of the tech and how it differs to the virtual reality. The main goal is to understand how augmented reality is being used in logistics to innovate and enhance services. It refers to how courier and freight companies are taking advantage of this technology to upgrade the warehouses, transportation and enhance value added services. It also analyses how the retail market is modernizing its stores and is using mobile applications for online shopping. Using augmented reality has overall pros and cons and even though is a technology on its early stages it shows a great potential to revolutionize the supply chain in its totality.
-
Investigation of application and development of precision irrigation technology
239-248Views:250Due to the extreme weather conditions irrigation is nowadays considered an increasingly necessary factor. After evaluating the water requirements of the plant and the available water resources is necessary to decide what irrigation method to use. One of the most commonly used methods in field conditions is rain-type irrigation, of which there are several types (eg linear, winding drum). The uniformity of the field nozzles can be characterized by the Christiansen uniformity factor (CU%) and the distribution uniformity factor (DU%). The coefficients can be derived from the volume of water captured by the rain gauges. Our investigations were carried out in July and August 2019 at the University of Debrecen's Vision Plant Experimental Plant and at a linear irrigation equipment of a Nyírbátor company. The aim of the study was to compare the uniformity of water dispersion applied by conventional linear technology and precision linear irrigation technology. In addition we examined the intercept values of maize.
-
Improving of Geometric Precision in the Manufacture of Circular Holes Using Technology WEDM
238-245Views:215WEDM technology is among the final technology. It is characterized by the high quality of the machined surface. Therefore, a small geometric deviation from the desired shape, position, orientation or run out may have a significant impact on the functionality of the finished component. Its range is largely influenced by the accuracy of the applied electroerosion device, the precision of the workpiece and tool setting, the machining method, but also the combination of each other and the adjustment of all process parameters. They result in the final quality of the machined surface not only in terms of roughness parameters but also in terms of geometric precision of the machined surface. The aim of the paper was to describe the possibilities of improving the geometrical accuracy of WEDM with thin brass electrodes. At the same time, it contributes to an existing database of knowledge that defines the influence of selected aspects on the geometrical accuracy of the machined area in the production of circular openings.
-
Framework of Industry 4.0 Technologies
213-223Views:1487The increasing competition and globalization have changed the micro- and macro environment of companies worldwide. The number 4.0 marks the fourth industrial revolution, bringing information technology and automation closer together leading to fundamental changes in production methods. It is not only about the penetration of technology but also about the paradigm shift in business processes. Industry 4.0 is becoming a daily reality for domestic companies as well, giving rise to the era of high-level interaction among production resources and different players. Industry 4.0 will transform the structure of production and change global competitiveness giving enterprises new opportunities to create added value. In my study I presented the concept of Industry 4.0, its framework and innovative technologies. I described the intelligent logistics solutions and the most important advantages of Industry 4.0. Essentially, the use of these tools include in addition to the explosive development of industry the digitalisation of the entire economy affecting society as a whole. It is of great importance that small and medium-sized enterprises also respond to new technological opportunities otherwise will significantly lagging behind in the digital transition.
-
Analysis of Abrasion of Hot Metal Powder Spray Coated Layer
342-346Views:193By the application of the tradicional overhead welding and the different powder coating technologies results a new surface with improved abrasion resistance, we can optimize the dimensions of the part or we can rebuild some surface as a kind of repairing technology. By application of this technology we can avoid the replacement of the total expensive parts of the structure. Opposite to the tradicional overhead welding in this case there will be diffusion connection between the raw material and the surface coating, this connection type shows several positive properites. Our goal is to investigate the abrasion resistance of the coating. In this article we would like to introduce our results of the abrasion test by apllication of different powder coatings.
-
Investigation of the Resistance Force Acting on a Sailing Craft in the Case of a Change of Draft Caused by a Change of Powertrain Using Numerical CFD Simulations
30-35Views:229Nowdays In the case of recreational craft, interfering with motor drive solutions is a common workflow due to increasingly strict rules for environmental reasons. When switching from an internal combustion engine to an electric engine, the change in draft varies from boat to boat, but it can be said in all cases that as the mass changes, so does the draft. Because of this, the magnitude of the resistance force acting on the ship also varies. In this paper, we examine, through a specific example, the benefits of a change in dive caused by weight gain at different travel speeds.
-
Reducing the use of chemical for biological wastewater treatment by technological modification
107-113Views:116In the Wastewater Treatment Plant of Debrecen Waterworks, the experts working there fight daily with various problems typical of the Hungarian plant. Suitable denitrification requires the administration of an organic substance in many cases containing biodegradable organic matter. Between January 1 and December 31, 2017, 183.1 t of organic matter was needed. It was important to develop a solution for the site's specialists to ensure efficient biological wastewater treatment without the need for additional carbon input in the technology. We have also supported calculations to ensure stable denitrification irrespective of the fluctuating C/N ratio of incoming sewage. Thus, it would be unnecessary to add up to 200 tonnes of organic matter per year to the technology without which biological wastewater could be achieved.
