Search
Search Results
-
Value Creation along a Production-Service Value Chain
91-99Views:109Today’s products and services are so complicated and intertwined that their individual value creation is hard to determine. It is especially true when the products and services are necessary complements of each other and when they are affecting customer satisfaction for a long time. In the case of durable products needing professional installment service, the study of value creation poses many difficulties. Our research shows and emphasizes the process characteristic of value creation, and how the different steps (production, service, long-term use) should be looked at, and what further analyses can be done.
-
Examining Drone Logistics Solutions in Retail
48-61Views:144The possibilities of using drones in transportation will be determined by the capabilities of drone technology, legislation, various advocacy and trade unions, and the degree of general acceptance. Technology and infrastructure are given, customer habits and needs are favourable, and emissions generated by packets moving between two points are growing steadily. Despite these favourable conditions, the effects of drone use should be thoroughly reviewed. The environmental impacts of the project were analyzed by PEST analysis and the main influencing factors were studied using the Porter model. Concluding our results based on questionnaire surveys and feasibility examinations of fast food delivery, it can be said that a system based on drones can efficiently be operated and cost-effective using round trips, however, the legal issues and uncertainties that arise in the delivery of drone hippers remain a very significant hindering factor for a long time.
-
Decision Support for Difficulties in a Furniture Manufacturing Company
405-418Views:103In “Decision support for difficulties in a furniture manufacturing company” titled work we are presenting in detail the operation of a particular furniture company and the difficulties encountered during its operation, which they try to overcome in some way so that they do not hinder the operation of the company. After that, we will show how we wanted to achieve the production support system. In different versions, we detail what we actually wanted to accomplish while showing results that illustrate the evolution of the system. We also present the difficulties of the development, which is made in Java. We also present the latest version of the system and its results. After processing the input parameters, the system is able to produce results using scheduling algorithms that can help in making important decisions during production planning.
-
Framework of Industry 4.0 Technologies
213-223Views:1383The increasing competition and globalization have changed the micro- and macro environment of companies worldwide. The number 4.0 marks the fourth industrial revolution, bringing information technology and automation closer together leading to fundamental changes in production methods. It is not only about the penetration of technology but also about the paradigm shift in business processes. Industry 4.0 is becoming a daily reality for domestic companies as well, giving rise to the era of high-level interaction among production resources and different players. Industry 4.0 will transform the structure of production and change global competitiveness giving enterprises new opportunities to create added value. In my study I presented the concept of Industry 4.0, its framework and innovative technologies. I described the intelligent logistics solutions and the most important advantages of Industry 4.0. Essentially, the use of these tools include in addition to the explosive development of industry the digitalisation of the entire economy affecting society as a whole. It is of great importance that small and medium-sized enterprises also respond to new technological opportunities otherwise will significantly lagging behind in the digital transition.
-
Analysis of Henbuk Startup Value Using a Scorecard Assessment Method
1-12Views:95This study aims to determine the valuation value of Henbuk's startup by conducting qualitative and quantitative analyses. Henbuk is a startup engaged in e-commerce. The Henbuk startup is currently in the initial funding stage, and the founders are opening opportunities for investors, which can later support operational and development activities. In obtaining funding from investors, the Henbuk startup requires an initial assessment of the company's value. The score assessment consists of several indicators, e.g., quality of the founder and team, opportunity size, product and technology, competition, marketing, sales and partnerships, and the need for additional investment. The results of the value assessment are obtained by using the Scorecard Assessment Method. The results of this study may help to determine the real value of other start-ups for the investors in the future.
-
Analysis of Abrasion of Hot Metal Powder Spray Coated Layer
342-346Views:168By the application of the tradicional overhead welding and the different powder coating technologies results a new surface with improved abrasion resistance, we can optimize the dimensions of the part or we can rebuild some surface as a kind of repairing technology. By application of this technology we can avoid the replacement of the total expensive parts of the structure. Opposite to the tradicional overhead welding in this case there will be diffusion connection between the raw material and the surface coating, this connection type shows several positive properites. Our goal is to investigate the abrasion resistance of the coating. In this article we would like to introduce our results of the abrasion test by apllication of different powder coatings.
-
Investigation of the Resistance Force Acting on a Sailing Craft in the Case of a Change of Draft Caused by a Change of Powertrain Using Numerical CFD Simulations
30-35Views:201Nowdays In the case of recreational craft, interfering with motor drive solutions is a common workflow due to increasingly strict rules for environmental reasons. When switching from an internal combustion engine to an electric engine, the change in draft varies from boat to boat, but it can be said in all cases that as the mass changes, so does the draft. Because of this, the magnitude of the resistance force acting on the ship also varies. In this paper, we examine, through a specific example, the benefits of a change in dive caused by weight gain at different travel speeds.
-
Reducing the use of chemical for biological wastewater treatment by technological modification
107-113Views:90In the Wastewater Treatment Plant of Debrecen Waterworks, the experts working there fight daily with various problems typical of the Hungarian plant. Suitable denitrification requires the administration of an organic substance in many cases containing biodegradable organic matter. Between January 1 and December 31, 2017, 183.1 t of organic matter was needed. It was important to develop a solution for the site's specialists to ensure efficient biological wastewater treatment without the need for additional carbon input in the technology. We have also supported calculations to ensure stable denitrification irrespective of the fluctuating C/N ratio of incoming sewage. Thus, it would be unnecessary to add up to 200 tonnes of organic matter per year to the technology without which biological wastewater could be achieved.
-
Impact of Digitalization on Domestic Trade Strategies
318-333Views:1345The aim of our study is to reveal the fit of digital space into current and future trade and to assess the effects of digitization on Hungarian trade strategies. The information gathering and purchasing habits of consumers have changed dramatically in recent years. Consumers today make buying decisions based primarily on convenience, effectiveness (fast and convenient access to products at adequate price/value ratio), and experience. Adjusting to these trends, traders developed novel trading strategies, and the use of achievements of digitization is an integral part of these strategies. One aspect of digitization is the increasing global development of e-commerce. The Hungarian online commerce have also been expanding significantly from year after year: based on 2018 data, domestic and foreign online sales volume have passed 1000 billion HUF. The Hungarian online consumers buy on the Internet more and more often and at greater and greater value. The online shopping on virtual reality platforms may make this purchase mode more experiential. Webshops have to meet new consumer needs, and deliver the ordered products as soon as possible, preferably within 24 hours. An increasing number of parcel delivery options has begun becoming more and more popular (e.g., automatic parcel terminals, pick pack points). However, traditional channels should not be buried, either. Their obvious advantage is that consumers can take their choice based on multiple senses and it also gives them more room for impulse buying. Combined with the digital technology compliant with contemporary requirements, this can offer a complete shopping experience. Nowadays, recognizing this need online and traditional channels have been mixed in several cases (e.g., multichannel, omnichannel, cross-channel sales) and offer several options for consumers during the purchase process. The sales area optimization of traditional shops and the buyer paths aided by digital technology (e.g., digital shelf labels) are designed for the buyers’ convenience. The newest innovations imply automation of the buying process making the whole process more convenient and more personalized with the use of sensors (e.g., Amazon Go) or robots (e.g., Pepper). In our future purchases, digital personal assistants will appear as digital versions of sales personnel.
-
A Slurry-Pot Abrasive Wear Test Device for Several Composite Materials
437-444Views:86To choose the proper material for agricultural machinery we tested several materials with abrasive cloth on the pin-on-plate test device. After having the pre-results, we launched more complex abrasive testing (slurry-pot) simulating more realistic mode with soils to investigate the abrasive wear mechanism and resistance of the selected up-to-date polymeric structural materials. for this, we developed a modified slurry-pot test machine that ensures the comparability of the materials over a wide range of conditions. Through this device, several parameters could be controlled like speed, the soil particle’s hit angle on the tested surface.
-
Flexibility Analysis Of Inventory Cost Model With Ergonomics
166-173Views:104The economic and environmental sustainability issues in supply chain management have integrated by many researchers in the past decades. The ergonomics as a social aspect of sustainability had received a little attention by researchers. Therefore, the aim of the paper is analyzing the flexibility of developed inventory cost model with relaxation allowance and endurance time as a social aspect of sustainability. The effects of distance, unit weight of item and total number of items on relaxation allowance, the total cost of logistics operation and the EOQ model were investigated. The analyzed mathematical model was a single operator-single material model which covered transportation of fixed amount of raw materials from storage plant to production plant by manual material handling with simple cart and picking, storing, pushing and pushing back with empty cart for manual handling of the products. The different parameter values applied for analysis such as total amount of handled items (Q) changes between 500 pcs to 2750 pcs, unit weight of item (w) changes between 0.1 kg to 1 kg, distance of movement by manual material handling for picking and storing motions (d1) changes between 2 m to 3 m and the distance between the storing equipment and the supermarket of the production line for pushing motion (d2) changes between 15 m to 20 m. The results of the analysis indicated that the longer the distance of movement for all motions leads to decrease in savings of the model compared to EOQ model. The increase in unit weight of item is increase the savings obtained from application of our model and decrease the optimal lot size. There was no specific change on savings or optimal lot size as the total amount of handled item is increase. The compared results indicated that an increase in d1 and d2 lead to an increase in optimal lot size and increase in total cost of the model. Consequently, the analysis has shown that a decrease in lot size would be the better way to improve both ergonomic conditions and total cost of production in any different parameter values. Finally, the analysis of the inventory model with ergonomics were proved that this model is suitable for different industrial practices.
-
Generative Design of a Mechanical Pedal
48-58Views:731Nowadays, there are various tools that support the initial stages of design available to use for engineers, the traditional Computer-Aided Design (CAD) has been implemented in the engineering components design and replaced manual drafting. However, with the advances and the rapid technology development, new trends emerged to cope with this evolution, namely, Generative Design, Topology Optimization, and Generative Engineering Design. The method is based on numerical algorithms that generate a variety of design and modelling options based on the criteria and constraints set by the designer to allow further design exploration. Proposed in this paper is an implementation of the generative design of a mechanical pedal with further finite element analysis.
-
Influence of MTP on Surface Roughness and Geometric Accuracy of Machined Surface at WEDM
91-97Views:102Electrical discharge machining technology is one of the most precise machining methods. Therefore, even the smallest deviation of micro and macro geometry generally has a significant impact on the overall quality of products produced by this progressive technology. The quality of the machined surface after Wire Electrical Discharge Machining (WEDM) is influenced by a large number of factors, most of which are influenced by the Main Technological Parameters (MTP). The aim of the paper was to describe the results of experimental research aimed at assessing the impact of MTP for WEDM on the quality of machined surface in terms of geometric accuracy and roughness parameters Ra and Rz. The samples were made of high alloyed ledeburitic chromium-molybdenum-vanadium steel designated EN X155CrVMo12-1 on a Sodick AQ535 electroerosion machine. The tool used was a standard compact brass wire 0.25 mm with the designation Elecut Brass CuZn37.
-
The CAD Modelling Possibilities of Gear Pairs by Two Ways in the Mechanical Engineering Practice
205-219Views:118The GearTeq 2021 software is a complex gear designer software which is capable to design different types of gears based on the initial geometric parameters by the user. Naturally, the users’ appropriate knowledge for the gear theorem and the manufacturing technology is indispensable for the design. The possibilities of the software are shown in this publication. The designed gear pairs are usable for different engineering fields (robots, working machines, vehicles, etc.).
-
Comparison of the information content of the notes on the accounts between information technology services and sports activities
689-700Views:169Annual accounting statements are an important source of information within business relations amongst companies. However, it should be noted that due to their aggregate nature, the necessary information and through that the necessary knowledge can only be obtained from the two fundamental parts of the annual statements (balance sheet and profit and loss account) if the notes on the account contains the information that contributes to the more comprehensive interpretation of the other part of the annual statement. Beyond that, the notes to the financial statement have to help the presentation of a reliable and realistic overall image. In the notes to the financial statement, depth and detail of the disclosed information are not specifically stated, therefore their professional evaluation is left to the given enterprise. My basic purpose is to illustrate a comparison of the information content of the notes on the accounts between information technology services and sports activities. By means of text mining, we analyse the extent to which the notes on the accounts are in conformity with the Accounting Act.
-
A Literature Review: Artificial Intelligence Impact on the Recruitment Process
108-119Views:9214This paper aim is to review the implementation of artificial intelligence (AI) in the Human Resources Management (HRM) recruitment processes. A systematic review was adopted in which academic papers, magazine articles as well as high rated websites with related fields were checked. The findings of this study should contribute to the general understanding of the impact of AI on the HRM recruitment process. It was impossible to track and cover all topics related to the subject. However, the research methodology used seems to be reasonable and acceptable as it covers a good number of articles which are related to the core subject area. The results and findings were almost clear that using AI is advantages in the area of recruitment as technology can serve best in this area. Moreover, time, efforts, and boring daily tasks are transformed to be computerized which makes a good space for humans to focus on more important subjects related to boosting performance and development. Acquiring automation and cognitive insights as well as cognitive engagement in the recruitment process would make it possible for systems to work similarly to the human brain in terms of data analysis and the ability to build an effective systematic engagement to process the data in an unbiased, efficient and fast way.
-
Digital Twin and Shadow in Smart Pork Fetteners
515-520Views:247This paper introduces our ongoing research in the field of smart livestock farming. The base idea in this research is to take some industry based concepts, and adapt them into agriculture. In Industry we live the fourth industrial revolution, which is not a technical, but an organization revolution. So in this concept there are two key ideas, which are digital twin, and digital shadow. This article is about creating digital twin and digital shadow of a modern pig fattener. These models are based on the literature, and are identified on the data shared in these. However, these models can’t be used on real systems before identifying them on the actual circumstances. At this stage of research only digital twin of the product was created, and only some aspects of it. This however can simulate an average porkers feed consumption, weight growth and calculate the weight on certain stages of breeding. Further development is ongoing and our target is to make a fully functional model of a pig fattener.
-
The Factors of Digitality and Sustainable Competitiveness in the Domestic Context
217-226Views:158The recovery of international relations and the development of technology are in correlation with the increasing globalization tendencies. These processes increase the interdependence of countries, but also the competition between them. The factors of competition are constantly changing and being revalued. As a result new elements appear in addition to the traditional elements, and there are assimetries between existing components. The economic performance of a country increasingly depends on the knowledge and technology, its economic success on the use of knowledge. The purpose of the study is to present and analyze the proxies that define and shape the role of Hungary by IMD Competitiveness Research Center and by the complex indicators developed by Korea-based SolAbility. It also draws attention to all the factors that will significantly effect our country's economy in the future.
-
Utilization of 3D Printing in Replacement of Basic Plastic Workpieces
274-282Views:174In the experiment, a 3D printed cogwheel is made using the FDM technology to replace a broken part in a sewing machine. The aim of the project is to examine if a 3D model can be created and manufactured using only entry-level technical knowledge and tools. By the end of the article, it will be apparent that creating functioning plastic parts with a hobby 3D printer and basic CAD experience is very much possible.
-
Analysis of face milling technology with a thermal camera by the changing of the number of revolution
142-147Views:103The aim of the publication is the analysis of the temperature zone of cutting operation in case of face milling technology. The analyses are done considering of the changing of discreet number of revolution beside the constancy of the more technological parameters. The measuring concept will be determined. After the experiments the received thermal images will be analysed.
-
Local Annealing of Cold Rolled Aluminum Sheets by LASER Treatment
21-26Views:113LASER treatment widely used in material processing technologies. The annealing is not the typical application of the LASER treatment, but this is possible to apply in case of cold deformed metals. In the article a cold rolled EN AW 8006 aluminum sheet is annealed by LASER treatment. The microstructure of the annealed sheets is observed by optical microscopy. An existing cellular automata simulation of recrystallization process is modified to study the LASER annealing. The observed microstructure and the simulated results are compared to determine the further development of the developed automaton.
-
Ultrasonic Powder Atomization for Additive Manufacturing
69-75Views:136The following article presents a special case of metal powder production, ultrasonic metal atomization. In this case, ultrasound technology is based on the capillary wave phenomenon. We verify the suitability of the produced powders for 3D metal printing with various tests. In the case of prints with a metal powder bed fusion (PBF), the properties of the raw material of the powder are extremely important. The main results of the tests carried out in the article (SEM images, EDS composition analysis, sieve analysis) were described.
-
Simulation of Hot Rolling by Cellular Automata
190-195Views:184Our research is focusing to one of the most complex and important production step of flat rolled products that is the simulation of hot rolling. During hot rolling two phenomena as work hardening and the process of regeneration of crystals has strong influence for physical properties of microstructure of aluminium alloys. It needs to be taken into account in case of rolling technology steps and development. When we talk about aluminium the dynamic softening in fact it is dynamic recovery that is followed by dynamic recrystallization. It goes in the same order of magnitude rate. But in steels the recovery has only a minor effect. Hot rolled and newly modified grain structure is influenced by these dynamic phenomena. Hot rolled grain structure goes through significant changes under further production steps like cold rolling and heat treatments. But aside from these intermediate production steps the microstructure that we get after hot rolling has significant effect for mechanical and grains structure of the final flat rolled product. Proper technology planning is essential that for cellular automata simulation method can ensure useable and good solution for the simulation of recrystallization.
-
Model Calculations on the Use of Mobile and Stationary Units for Wood Pellet Production
1-8Views:317This paper presents the model calculations made for supporting the decision making of different technology alternatives. Base cases were A) use of a mobile pelletizer and B) using pellet factories at fixed locations for the production of a new product, sheep wool pellets. Calculations were made for three alternatives for each base case. The results of the model were used to examine the energy, time and cost criteria of the alternatives. Based on the given preliminaries, results of the model calculations supported the recommendation to choose case B) for further technology management and supply chain management decisions.
-
Food Industry 4.0 Readiness in Hungary
1-12Views:263In terms of production value, the food industry is the third-largest in Hungary, the first in Hungary in terms of the number of employees, and the first in Europe in the processing industry, as well as a significant user of resources. The research examined the state of art of digitalization readiness, focusing on I4.0 technologies, which supports the management to operate more efficiently the enterprise and to make better decisions. So the focus was on integrated enterprise information systems, management support systems, business intelligence systems, industry 4.0 technologies, and issues related to their application. The analysis based on an online questionnaire survey the request sent to 4.600 enterprises, the response rate was 5% which was representative of the branches of production, covered the Hungarian food and beverage manufacturing sectors in 2019. The companies were asked the most critical technologies in development, going towards Industry 4.0. The research tools were LimeSurvey, Mailing List Server, Excel, Power BI (Desktop, Publishing Server to distribute the results). The used analysing methods were making calculations, pivot tables, models, dasboards. We found that a significant portion of businesses, 78 %, use mobile devices in the manufacturing process. The three most relevant digital technologies are geolocating (GPS, GNSS), cloud computing, and sensor technology. The current level of digitalization and integration cannot be said to be high, but respondents are very optimistic about expectations. Improvements are expected in all areas in the next 2-3 years in terms of digitalisation and integration. Vertical integration involves, first and foremost, cooperation with partners in the supply chain. Horizontal integration means close, real-time connectivity and collaboration within the company. Unfortunately, between 6% and 15% of SMEs (approximately 9% on average) and large enterprises, 36% have a digital strategy. According to the survey, the sector needs significant improvement and creating a digitalization strategy.
