Search
Search Results
-
Tribological Behaviour Comparison of ABS Polymer Manufactured Using Turning and 3D Printing
46-57Views:150Additive and subtractive manufacturing of Acrylonitrile Butadiene Styrene (ABS) were employed for fabricating samples. The Additive manufacturing was represented through 3D printing, whereas subtractive manufacturing carried out by Turning. Some developments have been applied for enhancing the performance of the 3D printer. Tribological measurements of the turned and 3D printed specimens have been achieved. Studying the difference between static and dynamic friction factors and the examination of wear values were included. A comparison of the tribological behaviour of the turned and 3D printed ABS polymer has been investigated.
-
Quality Improvement in Higher Education – Role of Indicators and Student Feedbacks in Course Improvement
1-10Views:132Customer oriented conduct and process-based thinking have become quasivital pillars of durable competitiveness for the business world today. Following this approach should result in satisfied customers, decreased costs, and efficient employees. However, the actors in higher education are just starting tolerant his way of thinking. The increasing focus on quality issues and the process-related approach to this is catalyzed by several factors. These concept is not a new issue at the Budapest University of Technology and Economics. The Department of Management and Corporate Economics as the flagship of teaching and researching quality management at the University looks for opportunities to give practical answer. Based on this the purpose of my paper is to demonstrate different examples at the different level of processes in higher education.
-
The Effect of MMS Lubrication on Surface Roughness During Machining
452-457Views:74I display this paper the chipping front metal of cutting allocated geometric, considering particular the friction. I catch the attention energy's balance sheet someday metal of cutting, open one new direction the manufacture technology. I display this new direction's metal of cutting condition. but built I delineate his paper final division this new policy searching programme, consumed trial instruments as well as the evaluation's mode.
-
Optimization and Analysis of Structure about Lifting Device of Logistics Sorting
425-431Views:147The lifting device of a logistics sorting machine needs high frequency upward and downward reciprocating motion therefore the cutting fork arms and matching parts of the shaft are often worn out. In this paper the problem of the shear fork types applied for the lifting mechanism is studied at first. Then the advanced numerical simulation software ANSYS adopted for the lifting mechanism of the shear fork type, and the means of virtual simulation is introduced. Hence the possible location of faults and fault modes are analysed. Then improving measures about the lifting mechanism of the logistics sorting machine are suggested.
-
Control Valve Testing During Operation
11-18Views:84The most commonly used control technology in building engineering is mixing. The purpose of the measurement is to find out what effects have the different control valve position combinations on the system. How the mixing efficiency changes in these cases.
-
Investigation of Information and Communication Technologies (ICT) Usage in the Business Relations of the Agri-Food Econ
21-29Views:110Small and medium-sized enterprises are the engines of Europe's economy. This is demonstrated by the European Small Enterprises Charta, adopted in 2000, and by the fact that this sector employs more than 90 million people. Appropriate information and communication technology is essential to maintain their ability to function effectively and competitively. They need to know how to use these technologies for their smoot growth in productivity. The purpose of our study is to assess the regional ICT penetration of the Hungarian SME sector and compare this to that of the EU Member States.
-
Effect of the Changes in Bulk Density and Granulometric Properties on the Strength Properties of the Moulding Sand Mixtures
116-122Views:149Foundry technology uses a lot of several natural materials. Sands use for preparing mixtures whereby making moulds or cores. Sand is defined as a granular, refractory major portion of mixture (90 – 98% in dependence on used binder). Sand properties depend on it has chemical and mineralogical composition; mainly particle size distribution and shape of grains and its size and sand surface texture. A comparative measurement of two quartz sand with different surface quality was carried out. Greensand mixtures were prepared to measure their permeability, compressive strength and wet tensile strength. The strength of sand mixtures has two main components. One of them is the cohesion of the binder; the other one is the adhesion between the binder and the foundry sand. The aim of this research is to determine the ratio of cohesion and adhesion within the strength values.
-
Exploring the Role of Emotions and Moods in Decision Making: Study on the Use of Structured Decision Approach and Intuition
140-149Views:325Emotions and moods can play a significant role in the decision making. The present paper contest this point by providing evidence on the two important approaches used in decision making that is structured decision approach and intuition. For this purpose data was gathered from 150 respondents in two different groups. Chi square test, independent sample t-test and logistic regression analysis were used to test the hypothesis. The results of the study reveal that individuals with positive and negative mood state vary significantly in their use of structured decision approach and intuition. The individuals with negative mood state are more likely to use all steps of structured decision approach as compared to the individuals in the positive mood state. The results of the study further reveal that the individual’s emotional state significantly predicted the use of structured approach and intuition in decision making.
-
Temporal Changes of Pyrite Oxidation Rate in Bolivian Sulphidic Mining Wastes
194-202Views:78Since the 70's, when huge sulphidic open pits were developed, the acidic rock drainage (ARD) become the leader problem of the sulphidic mining industry. Although the recycling is an essential technology, it cannot cover the demand alone, thus mining activity needs to continue. Acidity in mine drainage commonly requires most of the attention, but the main problem is the caused elevated level of metal mobility and leaching, which are generated by the increased rates of sulphide weathering under acidic conditions. The Itos mine is a polymetallic vein deposit in Bolivia, had been mined for silver and tin until 1990, leaving behind much and huge tailings and mine waste heaps, where quite often the pyrite content exceeds 10 %. Serious ARD effects take place in the mine waste heaps. These processes can be well characterized with the pH 1 or 2 of the seepage water, which forms serious alteration in the waste itself and the neighbouring rocks. In three consecutive years, the pyrite oxidation rate was investigated on the same 7 samples by humidity cell test. 5-6 months pauses were left between the humidity cell test periods, which mimics the alternation of wet and dry periods, typical for the place. The results give much more information, than the oxidation rate in the individual test periods, showing the changes by time. This applied method gave good result to characterize the behaviour of the waste in long-term. The column test was complemented with mineralogical analyses, such as electron probe micro analysis. The mineralogical and column test analyses show, that the changes of the pyrite oxidation rate split the samples into three different groups, one where the oxidation rate decreases, second where it increases with time and the third where oxidation rate is maximal and stays stable for several years.
-
Possibilities of the Reclamation of Wastewater in Small Abattoirs Combined with Rainwater Harvesting
115-125Views:56The purpose of the study is to review the extent to which waste water from small mobile slaughterhouses can be reclaimed along with the basic cases and the purpose for which this can be realized. Keeping the criteria of sustainability in mind, I identify the possible and at the same time reasonable combinations of technology, highlighting and presenting in more detail those that include the utilization of waste water and the utilization of rainwater. I will describe the limiting factors - site features, environmental protection and health regulations - which are decisive in which alternative can be chosen during a specific installation.
-
Development of engineering and innovation skills
364-369Views:131Spatial visualization skills have an important role in teaching and learning of engineering studies. Many studies have shown that there are correlations between various measures of spatial skills and performance in particular Science, Technology, Engineering and Mathematics (STEM). Many engineering students have problems with solving mathematics problems, using mathematical models in practice, imagining a spatial figure and therefore to solve the spatial geometry exercises, so development of these abilities is very important. We have developed special tools and worksheets for development of engineering and innovation skills.
-
The Effect of annealing temperature on corrosion resistance and microstructure of Zr-Sn-Nb-Fe alloy
420-424Views:101The Ti-2Al-2.5Zr titanium alloy plate in beta phase water quench at different times of the reentry after annealing is implemented while primary phase number and size distribution of samples are obtained. This research is carried out on corrosion behavior in 3.5% [mass fraction] NaCl solution. Experimental study showed that after the beta phase water quenching Ti-2Al-2.5Zr titanium alloyed after 500 oC annealing when partial recrystallization happened. There seems to be lots of tiny dispersion in the alloy that was annealed with its samples of six-party [HCP] structure of Ti, Zr, Al phase 2 with the dimension below 100 nm. Reaching 500 oC when the rate of annealing at a primary phase of the sample at 550 oC is low 90% of the primary phase is less than 100 nm. The changing of the rule of present decreasing also triggers little difference overall. Precipitation in the process of annealing Zr [Nb,Fe,Cr] 2is less that proves to be good for corrosion resistance.
-
Economic Analysis of Thermal Insulation Systems
1-5Views:80One of today's most important problem of inadequate energy management. In Hungary, most of the buildings considered to be outdated in the building materials used and taking into account the construction technology. A significant part of the heat energy used for heating purposes before leaving the environment through the building envelope elements used in time. In our study we investigate whether an average house how much energy you can save the facade walls with insulation.
-
What is worth knowing about the establishment from a work safety point of view
24-31Views:109Under establishment, we mean the process that results in the creation of a new unit (eg factory, plant, office, etc.), a workplace or an existing one what will be renewed, expanded or restructured, or installed; installed on a machine, plant, appliance, whether or not for productive or non-productive purposes. It is generally true that the design, construction, use and subsequent operation of workplaces, facilities, technology, materials, energy, personal protective equipment; production, distribution, import, transportation, movement, use and use of workplaces; in the absence of these, the requirements of the scientific-technical standard can be expected. An employer, operator, and service provider must adapt to market conditions. Accordingly, it should monitor the expectations of customers, business partners, market changes, trends to adapt to expectations, and therefore constantly develop their products, services, produce reliable quality, ensure that quality meets the market expectations providing personal and material conditions to ensure that employees can effectively and safely meet market expectations. The recognized business perception of the employer is to accomplish the above, the objectives to be achieved must be formulated, priority should be given to the potential risks (with particular regard to occupational safety risks) to be measured, measures to be taken to ensure effectiveness, short-, medium- and long-term planning, investment.
-
Investigation of SCOR Model in Connection with Performance and Warehouses
227-239Views:132Business leaders can use several strategic tools to improve the organization, depending on what they consider to be important. The Supply Chain Operational Reference Model (SCOR) is one of these. Its importance is to link business processes, performance metrics, best practices, and technology together and to create a unified structure. It promotes communication between the stakeholders of the supply chain and improves supply chain management and the efficiency of the related supply chain improvement activities. The aim of this study is to find out how the SCOR model appears in the international literature related to warehousing and performance. What methods and tools do authors use to investigate their research questions and hypotheses? Description statistics and category selection were used to present the results of the study. The number of SCOR model researches related to warehouse performance measurments are very rare, it is rather used to describe different processes. In the future, it would be worthwhile to extend the SCOR model analyzes to further fields, especially to warehouse performance measurements.
-
Role of Lean and Agile Supply Chain Models for Pellet Fuel Technologies
119-130Views:134Business organisations constantly strive to improve their processes, both internal and external. Within the supply chain of a product, different strategies can be applied. This paper aims to answer the basic questions like what is the core of lean and agile SCM strategies, what are the differences of the two models, and how can they be combined. This paper examines further, which of these SCM models and what elements of them can be applied for wood pellet supply chains, also examining the possibility of their combination. The result of these examinations is, that even though fuel pellets can be considered as simple commodity and not a very innovative product, diversity in input characteristics, optimization of fuel pellet technology process variables and changes in output market qualities and quantities need sometimes agile, flexible answer from pellet fuel SCM. The basically lean character of pellet fuel technologies and SCM can further enhanced by implementing agile SCM model elements, as is the increased integration of suppliers into the supply chain.
-
Laboratory-scale gasification of brown coal and char from RDF pyrolysis
188-193Views:137The pyrolysis is a promising process for producing syngas from wastes. However, the by-product of the technology may contain large quantities of carbon, therefore it is suitable for further syngas production. In this paper we examined the steam gasification of brown coal from Felsőnyárád and char from RDF pyrolysis derived from an experimental pilot plant operating in Zalaegerszeg. We performed our experiments in a laboratory-scale fix-bed reactor at 900 °C. The aim of this work to examine the efficiency of syngas production from pyrolysis char, as well as to explore the similarities and differences of the thermal decomposition of the feedstock materials.
-
The Observation of Natural Analogies and Their Use in Design
27-32Views:92According to, Thomas Heatherwick, who was an English architecture, ‘The biggest object is a building’. [1] Nature has phenomenal problem solving skills – ‘Nature knows it better’. It has an impact on us and on our subconscious.
-
Analysis of a Special, 3D Metal-Printed HPDC Tool Material
251-265Views:152High Pressure Die Casting (HPDC) is still the most productive metal-casting method of our time, however the more demanding are the industrial expectations, the more challenging it becomes to ensure the creation of the difficult cavity geometries and the thermal balance of the die-cast tool. New perspective is required, thus we can utilize high heat-conductivity tool steels and additive manufacturing technology.
-
Sport Consumption, Fan Engagement, Sport Statistics – Post-specific Passing Characteristics in Football
Views:607Digitalization and the explosive development of technology have led to significant changes in football. Due to the increasing amount of data available through various sensors and other data collections, we can observe the rise of data-centric, analytical and statistically oriented thinking in football, which is also of interest to fans. Digitalisation is also closely linked to sports consumption, which is why we have seen significant changes in this area in recent years. The pandemic has further amplified the speed of digital transformation in the sports industry. One of the most important contents for sports organizations and their fans is the in-depth sports statistics and analysis that enhances the consumer experience. In our study, we examined the most common performance indicator in football, passing. Our goal was to examine the position-specific pass characteristics in detail, therefore we also examined different pass properties in our research. As a model for our analysis, I chose the premier league, which has the highest UEFA coefficient. The three rounds (rounds 30-32) of the championship season 2019/2020 have been recorded and analyzed in terms of passes. there was a significant difference between the average number of passes per game between defensive and offensive players (t=7,988, p<0.05). There is also a gradual decrease in the number of passes attempted per match and the accuracy of the pass in the examination of the middle positions when examining the positions in the depth of the pitch. For both pass accuracy and average pass count, the decreasing ranking corresponds to the position of positions on the pitch (order: 1, central defender 2, defensive midfielder 3, inside midfielder 4, attacking midfielder 5, striker). In the value indicator of the position for passes, offensive positions performed more effectively than defensive positions. The extreme positions also stand out among the attacking positions, where in the case of the position value per pass number, 23.3% of the total test was completed and 14% of the amount of the established position value indicators was provided by these posts. Overall, our study points to post-specific pass characteristics and, knowing this, we can state that the comparison of players' passing performance is relevant if the players are in the same or related positions.
-
Research of titration curves of red mud samples
270-276Views:84The aluminium demand is increasing worldwide, so the amount of red mud, which produced during the production of aluminium, is constantly increasing, also. The researching of the economical processing of the byproduct has been under way for a long time, but the industrial implementation of recovery technology, that is suitable in all aspects, has not yet been realized. The use of by-products, in addition to reduce the risk of contamination of environmental elements, may be useful for the recovery of valuable metals, which contained therein.
-
Self-developed Controller System –based on Open-Source Applications
97-105Views:76In the University of Debrecen Building Mechatronics Research Centre faced by the application of building automation technology, are tackled by cutting edge research performed at the Research Centre. The embedded device system, the focus of the ongoing project at the Research Centre, is programmable, reconfigurable, and adjustable. The design of an efficient embedded system must meet regulatory requirements, for optimizing building energy efficiency. The system provides solutions for a range of industrial applications, and peaks the interest of building services providers (e.g. SMEs).
-
The Possible Job Creation and Job Destructive Effects of Technological Development
53-61Views:297Throughout history, technological change has often provided the basis for employee anxiety. Between 1811 and 1816, a group of workers in England who called themselves "Luddists" destroyed machines, because they thought it would endanger their workplace. 19th-century thinkers and economists such as Karl Marx and David Ricardo predicted that mechanizing the economy would ultimately worsen workers' conditions, depriving them of a decent wage. Over the last century, John M. Keynes (1930s) and Wassily Leontief (1950s) have expressed their fears that more and more workers will be replaced by machine solutions that will lead to unemployment. In recent years, Brynjolfsson and McAfee (2014) have argued that existing technologies reduce the demand for labor and put some of the human workforce at a permanent disadvantage. However, there are a number of compensation mechanisms that can offset the initial displacement effects of automation and process innovation in general (Vivarelli, 2015). First of all, while workers are being replaced in industries that introduce new machine technology, additional workers in new industries are needed. Second, automation (and process innovation in general) reduces average costs. Acemoglu and Restrepo (2017) found that this results, on the one hand, in the effect of price productivity (“priceproductivity”) (as production costs decrease, the industry can expand and increase labor demand); and, on the other hand, it leads to economies of scale in production (the reduction in costs due to automation leads to an increase in total output and increases the demand for labor in all industries). Similarly, Vivarelli (2015) argues that lower average costs can result in lower prices (if the industry's market structure is perfectly competitive), stimulate product demand, or result in extra profits (if the industry's structure is not perfectly competitive). If these extra profits are reinvested in the company, this investment can create new jobs. The presentation intends to present these counterbalancing cases and to provide real examples based on the literature.
-
The Impact of Gas Flaring On Man and His Environment and the Way Out
82-90Views:132The nature of flaring processes has created a severe impact on man and the environment. Massive environmental degradation as a result of flaring activities has led to fluctuations in climate as well as depletion of the vegetation cover through acid rain. Findings have been made on some harmful gases released into the atmosphere that have effects on the environment and also on man. In order to control these effects by ensuring a clean atmosphere and environment, a new flaring model (DanMat flaring model) has been suggested. The model uses smoldering mechanism to reduce the amount of heat released into the atmosphere during conventional flaring by 60%. It also uses scavengers to oxidize harmful gas produced during flaring activities into less harmful ones. With this model one can flare gas without polluting the environment since it reduces the emissions of harmful gases during flaring.
-
Y Generation and the Job Seeking
490-501Views:1262Generations Y and their expectations have caused many surprises for employers. They are different compared to their predecessors. Millennials were born in socialism in our country, but they did not experience from it so much, because they grew up in democracy. Their main feature is that they are openminded to opportunities, and they learn quickly modern technology innovations. They have a strong self-conscious, and are highly proactive. They prefer forms of atypical work, because they can carry out their work anywhere in the world due to the internet access. It is very important for them to keep the work - life balance. These properties have overwritten the conventional management methods, such as conventional recruiting techniques. This paper examines the main job seeking features of the Generation Y based on an empirical research.
