Search

Published After
Published Before

Search Results

  • Evaluation of various silo sorghum hybrids from the energetic aspect
    107-111
    Views:
    124

    The sweet sorghum is a perspective plant of bioenergy, which can be the foundation of Hungarian bioethanol production in the future. By the examination six sweet sorghum hybrids have been examinated by the viewpoint of sugar aggregation and bioethanol production capacity. The founda tion of the surve y was three growing se ason (201 0, 2011, 2012 ). The ex per ime nt w as on the production sites of U niversity of Debrecen CAAES RISF Karcag Research Institute. The production site of the sweet sorghum have been sampled by samples of 1 m2 by hybrids within the period of august 15 and november 15. The sugar content of the samples have been measured by refractometer which was the base in the determination of ethanol production capacity.

    As a continuation of the evaluation of energetic viewpoint the Higher Heating Value (HHV) have been measured from the bagasse of sweet sorghums. According to the results it can be stated that int he case of sugarcontent and the dinamics of the sugar aggregation can show several differences, while HHV of sorghum bagasse is within 16 200 and 16 900 J g-1.

  • Evaluation of sweet sorghum and sudangrass varieties by the viewpoint of bioethanol production
    57-61
    Views:
    129

    Bioenergy and biofuels are very important in today’s energy policy. These kinds of energy resources have several advantages against fossil fuels. Environmental protection is a cardinal point of widespreading these technologies but the economic considerations are important as well. In order to improve the rate of the renewable energy in the energy consumption, the European Union settled down a program which determines a minimum ratio of renewable energy in the energy consumption for each member country of the EU. To fulfil the requirements bioenergy and biofuels should be produced. This production procedure needs adequate stocks which are commonly agricultural products.
    One of the promising stocks is sorghum. This plant fits for bioethanol production due to its juice content being rich in sugar. In this study six sweet sorghum hybrids, two sudangrass hybrids and a sudangrass variety have been evaluated to determine their theorical ethanol production capacity.
    On the score of the results of the year 2009 it can be set that sudangrasses have a lower theorical ethanol capacity than sweet sorghums have. In the case of sweet sorghums 1860.29–2615.47 l ha-1 ethanol yields had been calculated, while the sudangrasses had only 622.96–801.03 l ha-1. After that throughout three years (2011–2013) the sweet sorghum hybrids have been evaluated in order to determine the fluctuations of the ethanol production capacity caused by the impact of the years. As a result 2425.44–4043.6 l ha-1 theorical ethanol capacities have been calculated, which means that sweet sorghums can be an adequate stock to produce bioethanol.

  • Production of corn in Serbia in the light of climate change
    305-322
    Views:
    196

    This paper presents the basic elements of maize production technology in Serbia. For their good knowledge, it is necessary to be familiar with the basic biological requirements of the species, phenology and its particular requirements for water, heat, soil conditions and mineral nutrition. A special emphasis in this paper is given to recent research by the author regarding the correction of production technology (selection of hybrids, time and density of sowing, etc.) from the aspect of knowing the weather conditions of the year to the moment of sowing and the amount and position of available nitrogen in the soil profile during the spring before sowing. In the light of predicted climate change conditions for the Republic of Serbia, the authors of this paper have proposed and appropriated adaptation measures. The general conclusion is that there are no general recipes for the correct production technology of this plant species, but should be adapted to each specific year, field and hybrid.

  • Challenges and limtations of site specific crop production applications of wheat and maize
    101-104
    Views:
    129

    The development and implementation of precision agriculture or site-specific farming has been made possible by combining the Global Positioning System (GPS) and the Geographic Information Systems (GIS). Site specific agronomic applications are of high importance concerning the efficiency of management in crop production as well as the protection and maintenance of environment and nature. Precision crop production management techniques were applied at four locations to evaluate their impact on small plot units sown by wheat (Triticum aestivum L.) and maize (Zea mays L.) in a Hungarian national case study. The results obtained suggest the applicability of the site specific management techniques, however the crops studied responded in a different way concerning the impact of applications. Maize had a stronger response regarding grain yield and weed canopy. Wheat was responding better than maize concerning plant density and protein content performance.

  • The possibilities and limitations of organic fruit production
    41-45
    Views:
    71

    In this review, direct and indirect technological elements of organic production are discussed. Today, there is a growing interest in production prepared without chemicals. We discuss the following issues: site selection, soil, rootstock and cultivar requirements, plant material, planting distances, crown formation, phytotechical operation, irrigation, soil tillage, soil covering and muchning, nutrition supply. Separate section deals with methods of plant protection.

  • The effect of hybrid, nutrient-supply and irrigation on the grain moisture content at harvest and the starch-content of maize (Zea mays L.)
    89-95
    Views:
    105

    Maize is a worldwide dominant plant. According to nowadays plant production principles it is important to investigate and optimize the site-specific nutrient-supply and other production factors, such as hybrid and irrigation, in the case of this plant as well.
    At the Research Institute of the University of Debrecen, Center of Agricultural Sciences and Engineering, at Látókép the effect of nutrient-supply and irrigation on the quantity and quality parameters of different hybrids were investigated in a small plot long-term field experiment. In this paper we introduce the results regarding the corn moisture-content and the starch content of the yield.
    We have chosen three maize hybrids – that have been bread in Martonvásár – for our investigations. The effect of macronutrients is investigated in this experiment on five levels. The half of the experimental area can be irrigated during the vegetation period – whenever it is needed – by linear irrigation equipment, but on the other half only the water amount originating from the precipitation can be used by plants.
    In the year 2008 the hybrid affected the grain moisture content at P=0.1% level, while nutrient-supply had an effect at P=10% significance level. We haven’t revealed either any effect of irrigation or of interrelationship between production factors. It can be stated that there are differences between the hybrids on each nutrient-supply and on both irrigation levels. The grain moisture content increased parallel to the longer vegetation
    periods.
    The starch content of maize is mostly affected by the hybrid,
    so on P=0.1% significance level. Regarding our results, it can be
    stated, that the starch content shows a decreasing tendency
    parallel to the longer vegetation periods.

  • The Role of the 4M-ECO Agrieconomical Modell in the Crop Cultivation
    170-173
    Views:
    96

    Today, c for agricultural use are of ever increasing significance. These provide an opportunity for more accurate planning, and favourably influence the efficiency and economic performance of given enterprise. The relevant literature divides models according to various criteria. The most common is the division between optimising and non-optimising models. Non-optimising models generally endeavour to make the best use of technological lines, machine capacity, while optimising models are used to optimise revenue returns from sales or, occasionally, production costs. In our case, revenue and returns from sales were optimised. The models examined consist of several modules. Which include the following: plant cultivation modules, evaluations (assessment of situation, conception plan, complex corporate evaluation), supplementary sheets (sheets and charts for ancillary plant production, general costs of operation, summary and crops structure optimisation). With the help of the model, annual a particular can be made for an optimal crop structure the resources of the enterprise. This it becomes possible to define the largest net revenue on a corporate level.

  • Study of the effects of silicon and sulphur foliar fertilization on yield components and yield in different winter oat cultivars
    43-49
    Views:
    43

    The aim of this work was to study the effect of sulphur and silicon foliar fertilisation treatment in different Hungarian-bred winter oat cultivars on the yield and the yield components, e.g. panicle ear-1 numbers per square meters, number of panicle nodes, number of spikelets per panicle, and thousand kernel weight (TKW) in the 2022–2023 growing season. The obtained results show that the applied fertilisers influenced the measured parameters, and we get the highest yield at the combined treatment – where silicon and sulphur was both applied –, and unexpectedly the lowest when only silicon was applied during the growing period. We measured the highest number of panicles m-2 at the sulphur treated experimental plots, and the lowest at the silicon treatment. We measured the average number of nodes of the panicle, and we can say that the sulphur fertilisation caused significantly higher values than any other treatment. Talking about the spikelet numbers, we get the highest value at the sulphur fertilisation, and the lowest at the control plots. However, our result wasn’t that prominent in the case of TKW, we get the highest weight at the silicon treatment, and the lowest at the sulphur fertilisation.

  • Development of seed analyses by means of various matrix solutions and the MALDI-TOF MS technique
    53-57
    Views:
    294

    The earth's population is growing steadily, currently accounting for about 7.3 billion people. Population growth causes food demand to rise, approximately 36 million people die each year due to starvation or related diseases. One solution to this problem is the continuous examination and development of the agricultural economy. In this study, matrix-assisted laser desorption/ionization time-of-flight mass spectrometer (MALDI -TOF MS) were used to analyse of sunflower, soybean and hemp. In order to analyse the protein of maize, this method has already been applied. However, for sunflower, soy and hemp, it is necessary to develop a sample preparation method. Choosing the optimal matrix solution for ionization the traget molecule is an essential part of developing the method. Our aim is to compare two different matrix solutions (α-HCCA, SA matrix), based on the properties (intensity, noise ratio, value of spectra) of the spectra.

  • Spatially Discrete GIS Analysis of Sampling Points Based on Yield and Quality Analysis of Sugar Beet (Beta vulgaris L.)
    32-37
    Views:
    89

    Fulfilment of the increasing quality requirements of sugar beet production can be analysed with sampling of plants and soil at the cultivated area. Analyses of the spatial characteristics of samples require exact geodetic positioning. This is applied in practice using GPS in precision agriculture. The examinations were made in a sample area located in north-western Hungary with sugar beet test plant. According to the traditional sample taking procedure N=60 samples were taken in regular 20 x 20 m grid, where besides the plant micro and macro elements, the sugar industrial quality parameters (Equations 1-2) and the agro-chemical parameters of soils were analysed. Till now, to gain values of mean, weighted mean and standard variance values, geometric analogues used in geography were adapted, which correspond to the mean centre (Equation 3), the spatially weighted mean centre (Equation 4), the standard distance (Equation 5), and the standard distance circle values. Robust spatial statistical values provide abstractions, which can be visually estimated immediately, and applied to analyse several parameters in parallel or in time series (Figure 1). This interpretation technique considers the spatial position of each point to another individually (distance and direction), and the value of the plant and soil parameters. Mapping the sample area in GIS environment, the coordinates of the spatially weighted mean centre values of the measured plant and soil parameters correlated to the mean centre values showed a northwest direction. Exceptions were the total salt and calcium-carbonate contents, and the molybdenum concentration of the soil samples (Table 1). As a new visual analysis, the spatially weighted mean centre values of the parameters as eigenvectors were projected to the mean centre values as origin. To characterize the production yield, the raw and digested sugar contents of the sample area, the absolute rotation angles of the generated vectors were determined, which indicate numerically the inhomogenity of the area (Figure 2). The generated spatial analogues are applicable to characterise visually and quantitatively the spatial positions of sampling points and the measured parameters in a quick way. However, their disadvantage is that they do not provide information on the tightness and direction of the spatial correlation similarly to the original statistical parameters.

  • Determining elements of variety-specific maize production technology
    157-161
    Views:
    70

    Our aim was to work out such new maize fertilizer methods and models which can reduce the harmful effects of fertilization, can
    maintain the soil fertility and can moderate the yield fluctuation (nowadays 50-60 %).
    The soil of our experimental projects was meadow soil. The soil could be characterized by high clay content and pour phosphorus and
    medium potassium contents. In the last decade, out of ten years six years were dry and hot in our region. So the importance of crop-rotation
    is increasing and we have to strive for using the appropriate crop rotation.
    The yields of maize in monoculture crop rotation decreased by 1-3 t ha-1 in each dry year during the experiment (1983, 1990, 1992,
    1993, 1994, 1995, 1998, 2000, 2003, and 2007). The most favourable forecrop of maize was wheat, medium was the biculture crop rotation
    and the worst crop rotation was the monoculture.
    There is a strong correlation between the sowing time and the yield of maize hybrids, but this interactive effect can be modified by the
    amount and distribution of precipitation in the vegetation period. At the early sowing time, the grain moistures were 5-12 % lower compared
    to the late sowing time and 4-5 % lower compared to the optimum sowing treatment.
    There are great differences among the plant density of different maize hybrids. There are hybrids sensitive to higher plant density and
    there are hybrids with wide and narrow optimum plant densities.
    The agro-ecological optimum fertilizer dosage of hybrids with a longer season (FAO 400-500) was N 30-40 kg ha-1 higher in favourable
    years as compared to early hybrids.
    We can summarize our results by saying that we have to use hybrid-specific technologies in maize production. In the future, we have to
    increase the level of inputs and have to apply the best appropriate hybrids and with respect to the agroecologial conditions, we can better
    utilize the genetic yield potential.

  • The examination of relation between the C/N ratio and the biogas yields in the Regional Biogas Plant of Nyírbátor
    63-68
    Views:
    100

    The Regional Biogas Plant of Nyírbátor was built by the Bátortrade Ltd. The biogas plant contains 6 mezophil and 6 thermophil fermentation tanks, because the biogas production is based on mixed compositions. The regional plant is a multifunctional system. It produces agricultural products and biogas with high methane content. The utilization of biogas is also accomplished here; gas-engines transform it to electricity and
    heat-energy. The product electricity is used by the local plants, the surplus is sold. 
    The aim of the research is the examination of the quality and quantity of the input materials that put into the mixers and follow the seasonal, periodical and optional changes of the input materials. The analyzation of the quality and quantity data can give an answer to the optional changes of biogas production because the input materials determine the composition of the examined recipe. The C/N ratio was between 11-13, the maximal value of the biogas yield was observed by 12.35 C/N ratio.

  • Changing of some parameters of the soil-plant system as an effect of different composts
    262-266
    Views:
    109

    Composting is an alternative way for practicing site-specific and environmental friendly plant nutrient supply. Our aim was to study the effect of different composts on plant and soil system. 
    Pot experiment with acidic sandy soil blended with three composts in five (0%, 5%, 10%, 25% and 50%) proportion was set up. Our experimental plant was perennial ryegrass (Lolium perenne L.). After the harvest of ryegrass we measured the fresh and dry weight of harvested plants, the P-, K-, Mg-contents, and the pH of soils.
    The three composts had different effect on dry weight production and on nutrient-supply of soil. We established that one of the compost had significantly larger effect on the dry weight of ryegrass compared to the others. In this study we proved that favourable compost/soil proportion is different in the case of different composts.

  • The application of bentonite and zeolite for soil amelioration in acidic sandy soil
    131-137
    Views:
    108

    In a pot experiment, we have studied the effect of bentonite and zeolite in different dosages [control; 5; 10; 15; 20 g kg-1] on acidic (pHH2O=5.65) humus sandy soil. The experiment was set up in 2007 and 2008 in the greenhouse of the UD CASE Department of Agrochemistry and Soil Science. As a test plant, perennial ryegrass (Lolium perenne L.) was used. 
    In laboratory examinations, pH(H2O), pH(KCl), hidrolytic acidity, nitrate-N content, readily available phosphorus and potassium content were determined. Among soil microbial parameters, the total number of bacteria, the cellulose-decomposing bacteria, the carbon-dioxide production, the microbial biomass-C content of soil, and the saccharase enzyme activity were measured. In the experiment the biomass of the test plant was determined.
    The effect of bentonite and zeolite in different dosages can be summarized as follows:
    − The pH increased under the effect of low dosages. With the increasing of the pH the hydrolytic acidity - at the bentonite treatments significantly – decreased. 
    − Regarding the readily available nutrient content of the soil, low and medium dosages proved to be effective. High dosages of bentonite treatments reduced the nitrate-N content, the readily available phosphorus, and potassium content of soil, by zeolite treatments the high dosages reduced the nitrate-N content of soil. 
    − Regarding the measured soil microbial parameters in both treatments low and medium dosages proved to be also effective, but the high dosages didn’t cause decreasing at the total number of bacteria, and by zeolite treatments the biomass-C content of soil.
    − Also the bentonite and zeolite treatments enlarged the biomass of the test plant. We experienced significant increasing by bentonite treatments by the effect of medium and high dosages, while in zeolite treatments only the high dosage caused significantly increasing in plant biomass. The largest dosages decrease the plant biomass. 
    − Under the statistical analysis we found many medium and tight correlation between the studied parameters. 

  • Study of plant physiological parameters in winter oilseed rape (Brassica napus var. napus f. biennis L.) production on chernozem soil
    111-115
    Views:
    200

    We made plant physiology examinations in Arkaso winter oilseed rape hybrid substance: relative chlorophyll content (SPAD) and leaf area index (LAI) measurements. The experiment was set in University of Debrecen Agricultural Sciences Center at Látóképi Experimental Station in four replications, in two different sowing times (I. sowing date on 08/22/2014 and II. sowing date on 09/09/2014 sowing againhappened because of the incomplete germination in the second subtance 01/10/2014) Three different plant density 200, 350 and 500 thousand ha-1, under the same nutrient supply, 45 cm row spacing. The experiment was green crop of winter wheat. The relative chlorophyll content (SPAD) and leaf area index (LAI) measurements were made in seven different times. We measured the maximum value of chlorophyll content in the first sowing time at 500, and the second sowing time at 350 thousand ha-1 plant density. The measurement results proved that there was a linear relationship between the number of plants and the LAI. The maximum leaf area index values we measured in both the sowing time at 500 thousand ha-1 reached.

  • Technological development of sustainable maize production and its effect on yield stability
    379-388
    Views:
    170
    In 2015 and 2016, we examined the effect of NPK nutrients, sowing date and plant density on yield on typical meadow soil. The amount of precipitation was 282.0 mm in 2015 (January–September), 706.0 mm in 2016 and the 30-year averageis 445.8 mm.
    Agrotechnical factors:
    – Experiment a)
               5 Dow AgroSciences hybrid with three sowing dates and three plant densities
    – Experiment b)
    In 2015 eight, in 2016 ten hybrids with different genetic characteristics and growing seasons, with control (without fertilization), N80+PK and N160+PKtreatments, five plant densities (50–90 thousand) with 10 thousand plants difference between the different densities.
    In a drought year, we reached the higher yield in the earlier sowing date and with the lower lower plant density of 70 thousand plants ha-1-. The maximum yield, depending on the agrotechnical factors, was 10–12 t ha-1 in 2015, while in 2016 it was 14–16 t ha-1. Yield stability can be increased using hybrid-specific cultivation techniques.
  • Comparison of crop production in Hungary and Tanzania: climate and land use effects on production trends of selected crops in a 50-year period (1968-2019)
    141-149
    Views:
    138

    A comparison of selected crop production for Hungary and Tanzania is presented.  The roles of climate, land use and productivities of crops vary significantly in the two countries. Climate impacts the distribution of crops in Tanzania more than in Hungary as Tanzania’s climate is diverse with hot, humid, semi-arid areas, high rainfall lake regions, and temperate highlands. In contrast, the Hungarian climate is temperate and uniform across the country. Land use changes significantly in Tanzania than in Hungary. Tanzania indicates a reduction in forest land and expanding agricultural land associated mainly with the variation in crop productivities and population growth. To maintain sustainable crop production, increasing crop productivity is of paramount focus to meet the requirements of the growing population.

  • Impact of ammonium nitrate and Microbion UNC bacterial fertilizer on dry matter accumulation of ryegrass (Lolium perenne L.)
    35-39
    Views:
    83

    Pot experiment was performed to investigate the effects of increasing NH4NO3 doses with or without Microbion UNC bacterial fertilizer
    application on dry matter production of ryegrass (Lolium perenne L.). Experiment was set up on calcareous chernozem soil of Debrecen-Látókép and on humus sandy soil of Őrbottyán. The bi-factorial trials were arranged in a randomized complete block design with four replications. Grass was cut three times. Dry matter production was determined and the sum of biomass of cuts was calculated as cumulated dry weights. Analysis of variance was carried out on the data in order to provide a statistical comparison between the treatment means. The least significant difference (LSD5%) test was used to detect differences between means. On the basis of our results it can be concluded, that the dry weights of ryegrass cultivated on chernozem soil were higher than on sandy soil. With increasing nitrogen supply the dry matter production of grass significantly increased in both types of soils. In case of sandy soil the increasing effect was more expressed, but dry weights of this soil never reached the appropriate values of chernozem soil. Application of Microbion UNC had positive effect on dry matter production of ryegrass grown on both two types of soils but the effect was more expressed on chernozem soil. Finally it can be concluded that the increasing effect of NH4NO3 on biomass weights was more expressed in both types of soils, the biofertilizer application also increased the dry weights of plant in a small degree. 

  • What does precision crop production hold for the future of soil science and plant nutrition?
    411-421
    Views:
    215

    The concept of precision agriculture is straightforward at the scientific level but even basic goals are blurred at the level of everyday practice in the Hungarian crop production despite the fact that several elements of the new technology have already been applied. The industrial and the service sectors offer many products and services to the farmers but crop producers do not get enough support to choose between different alternatives. Agricultural higher education must deliver this support directly to the farmers and via the released young graduates. The price of agricultural land must be higher if well-organized data underpin the production potential of the fields. Accumulated database is a form of capital. It must be owned by the farmers but in a data-driven economy its sharing will generate value for both farmers and the society as a whole.

    We present a methodological approach in which simple models were applied to predict yield by using only those yield data which spatially coincide with the soil data and the remaining yield data and the models were used to test different sampling and interpolation approaches commonly applied in precision agriculture. Three strategies for composite sample collection and three interpolation methods were compared. Multiple regression models were developed to predict yields. R2 values were used to select among the applied methods.

  • Alternatives of sewage sludge use in the crop production
    83-87
    Views:
    107

    The produced plants reduce the greenhouse effect because they fix CO2 that contributes to the causing of the greenhouse effect with about 50%. The production of fertilizers is not only a costly process but it needs a considerable energy at the same time. Nowadays, the reduction of the proportion of the fertilizer is significant. One of the reasons of this is that during the production such by-products are produced in a big quantity in which the necessary vegetal nutrients can be found in a considerable measure these enrich the organic matter of soil. The latter is essential condition for the microorganisms in the soil, without which the sustainable plant cultivation can not be achieved. Besides high prices of artificial fertilizers the utilization of the wastes is economically justified. Finally the other reason for the reduction of a usage of artificial fertilizer is that the wrong use of the fertilizer may cause environmental pollutions. I examined the cultivation application of the sewage sludge in laboratory circumstances during my work.

  • Changes in the Diaporthe helianthi Infection of Sunflower Hybrids Between 1998 and 2002
    214-233
    Views:
    71

    Plant protection, and especially the efficiency of protection against mycosis, is a very important production technological element concerning sunflower. The efficiency of production can be increased on the basis of a thorough pathological survey and its results carried out in a wide variety of hybrids, as the features of hybrids, the reactions of genetic bases to pathogens can be found out under domestic conditions.
    The tests were carried out at variety-test lots of OMMI for hybrids used for food or oil and other sunflower varieties admitted by the state at the Experimental Site DTTI Látókép, Centre of Agricultural Sciences, University of Debrecen between 1998 and 2002. The number of the tested hybrids was 49 in 1998, 45 in 1999, 49 in 2000, 55 in 2001, and 44 in 2002.
    Due to the infection source of high amounts remained from 1997 and the favourable weather conditions for the pathogens, an infection of high degree was experienced in the tested stands. The lowest infection index in the hybrids with a very short vegetative period was experienced with Beni hybrids. Comparing to the average of the hybridgroup with short vegetative period, a low infection index characterised the Baleno, Trident, IBH-166, Hysun 321, Resia, Alexandra, Cergold and Pixel hybrids. In 1999, among hybrids with medium vegetative period, Zoltán, Zsuzsa and Util hybrids could be highlighted because of their low infection index. In 1998, among confentionary hybrids, Marica-2 hybrid had the most favourable index values (2,55).
    During our trials, the experienced infection dynamics were compared in the event of hybrids with higher and lower susceptibility under different sowing technological elements. The results call for the fact that when a hybrid with higher susceptibility is produced, production technological elements, such as the time of sowing, influence considerably the damage caused by the pathogen, therefore it must not be ignored when its determination takes place. In the event of hybrids with lower susceptibility the change of the tested production technological elements within the biological optimum does not lead to the increased risk of the damage caused by Diaporthe helianthi.

  • Sunflower in Romanian agriculture
    153-163
    Views:
    197

    Romania is one of the largest producers of sunflower closely followed by Bulgaria, Hungary, France and Spain. The total sunflower production increased after 1990, due the increase of cultivated surface during the moderate yield average increasing rate. Last year, Romania was ranked first in the European Union (EU) for the area cultivated with sunflower and the total production of sunflower seeds, according to the National Statistics Institute (INS). Romania's position on the map of sunflower producers area is supported by about 1 million hectares sown. In the segment of sunflower productivity, Romania has an unfavourable position, situated in the last places in the classification of the EU's most productive agricultures. In order to increase production per hectare, it is required to perform measures aimed at the elements of sustainable cultivation technology, including the stability of the production level by ensuring phytosanitary protection.

  • Potential use of bamboo in the phytoremediation in of heavy metals: A review
    91-97
    Views:
    287

    There are many literature sources focusing on the phytoremediation of woody plants, but there are only few dealing with the phytoremediation of bamboo plants. Phytoremediation technology has the advantages of little disturbance to the environment and low remediation cost. Bamboo mainly exists in tropical and subtropical regions. As an energy plant, bamboo has a fast growth cycle, large biomass, simple cultivation, high economic efficiency, and convenient harvesting, which highlights the advantages of bamboo in phytoremediation. In addition, bamboo plants have good tolerance and uptake ability to heavy metals and have high application potential and development value in uptaking heavy metal contaminated soil. However, due to climate, temperature and other reasons, bamboo cannot be widely planted in most countries. Research status of remediation of heavy metal contaminated soil by bamboo plants is summarized. The feasibility of its application in heavy metal contaminated soil is discussed in this paper. Aiming at the shortcomings of existing research, bamboo plants have a prospect in the field of plant phytoremediation for the future.

  • Energy crops on less favoured (alkaline) soil
    115-118
    Views:
    103

    The reduction in fossil energy and row material sources induces growing demand for renewable resources. The growing demand for herbal raw materials has land use impacts as well. One way to reduce the conflict between the food and energy crops can be the utilization of less favored areas by growing energy crops. Among the potentially available areas for this purpose the salt affected soils (SAS) occupy a significant territories. SAS with structural B-horizon (meadow solonetz soils) represent the most wide spread group of SAS in Hungary. About half of these soils have been reclaimed and used as arable land and the remaining 50% are used as grassland. Sweet sorghum production for manufacturing of alcohol production was investigated in a long term amelioration and fertilization experiment on a salt affected soil (meadow solonetz). By means of regression analyzes the effect of sodium content of the soil and increasing mineral fertilizer doses were studied. According to the multiple regression analysis only the effect of nitrogen fertilizer was significant. On the solonetz type salt affected soil the effect of water soluble salt content of the soil was not significant, but there was a closer correlation between the ammonium-lactate sodium content and the yield of sweet sorghum. The maximum green mass was 45–50 t ha-1, in the case of low Na content and high level of nitrogen fertilization.

    In order to quantify the potential yield of natural grass vegetation the relationship between the soil forming processes and the grass vegetation
    was investigated. Beyond the different forms of Na-accumulation, the spatial pattern (mosaic-like characteristic) is also an inseparable feature of salt affected soils. The difference in the water regime, caused by the micro-relief is the main cause of variability. The run-on water keeps the deeper parts of the catena position wet longer. The wet situation causes more intensive leaching. In the low-laying parts of salt affected soils species preferring wet situations (mainly Alopecurus pratensis) are in majority. On the higher parts of the micro-relief species tolerating dry situations (mainly Festuca  pseudovina) are dominant. The yearly grass production of low laying areas can be 4–7 t ha-1 but because of prolonged wet  conditions the grass is not grazed and mowing can only be in old state. This old grass is not proper for feeding, but it may be suitable as energy plant. 

  • Vegetable production based on waste heat in closed greenhouses considering economic usage and competitiveness of the European Union
    41-44
    Views:
    117

    The study investigates two professional fields; the questions of vegetable production in greenhouses, the necessary steam supply and heat regulations. The actuality of this investigation is provided by the planning of a combined cycle power plant of 2400 MW in Hungary. According to the plans the steam developing by generating electricity in the power plant can be used to intensify the vegetable production. In my current study I present the experiences and results gathered as member of the research and development team led by Mr. Dr. Sinórós-Szabó.