Search
Search Results
-
Effect of year and irrigation on yield and quantity of different potato varieties
7-14Views:78dramatically in the last few decades. We are lagging behind Western European countries as regards yields. The ecological conditions are not favourable for potato, but the low yields other causes: the use of non-suitable seed, the low level of irrigation and nutrient supply and out of date machinery. The competitiveness of production is further decreased by the great alternation in yields from year to year, unpredictable market conditions, poor consumption habit, and often the lack of quality products.
The experiment was carried out at the experimental site of the University of Debrecen, Farm and Regional Research Institute, at Látókép. In our experiment, we examined the yield and selected quality parameters of 9 medium-early varieties in large parcels. Of the examined varieties, 3 are of Dutch, and 6 are of Hungarian breeding.
The experiment was set up in 2004 and 2005, on 50 m2 parcels on calcareous chernozem soil after winter wheat (2004) and two rowed barley (2005) as a forecrop. The varieties were examined in 4 repetitions in randomized blocks, of which two repetitions were irrigated, and two were non-irrigated. We examined the yields of the varieties, the distribution of tubers according to size and their percentages and changes, and selected parameters of quality and chemical composition due to irrigation. We studied the dry matter content, the starch content, the underwater mass, the amount of reducing sugars, and the colour index of frying of the tubers.
Summary, it can be stated that among the agrotechniques, year effect, variety and irrigation factors have considerable impact on potato yield quality and quantity. However, the impact of irrigation depends on the year effect. -
Applicability of hyperspectral technology for in situ phytoremediation
71-78Views:91The characterization of heavy metal polluted abandoned mining sites is a complicated assignment due to the variable spatial distribution of the pollutants, therefore complex integrated method is required in order to assess precisely the amount and the distribution of the contaminants. The examined area is flotation sludge reservoir of abandoned Pb-Zn mining site with serious heavy metal contamination. located in Gyöngyösoroszi, Northern Hungary.
The hyperspectral image of the flotation sludge is obtained by using a Digital Airborne Imaging Spectrometer DAIS 7915, in the frame of DLR HySens first Hungarian hyperspectral flight campaign (21/08/2002). Parallel to the flight campaign heavy metal content of soil samples were examined from the area of the flotation sludge. The analysis of hyperspectral data was verified by the examination of mine tailing samples by FPXRF (Field Portable X-ray Fluorescence spectrometry) (NITON XL-703).
Determinations of heavy metal containing minerals are based on the spectral profiles of the pixels of the area with using USGIS standard spectral profiles of the examined materials (galena, pyrite, sphalerite, goethite and jarosit).Applying the Spectral Angle Mapper with BandMax classification the distribution of minerals (galena, pyrite, sphalerite, goethite, jarosit) in the area was defined. The mineral formation occurs especially at the levees and the barren places of the Szárazvölgyi flotation sludge reservoir. Based on the statistic results of the samples, principal component analysis and correlation coefficient between the different metal content of the samples were calculated. The highest correlations were found between Pb-Zn, Fe-Zn and between Fe-Pb. This prove the results of the principal component analysis, where usually Pb, Zn, Fe introduce the main component.
Canopy analysis was also carried out with the hyperspectal image in order to classify the differences between vegetation types at the Szárazvölgy flotation sludge reservoir and analyse the applicability of it. Supervised classification methods were used to distinguish 8 vegetation types based on the spectral properties of the area. The results of the classifications were compared to a ground truth image, based on ortophoto, topographic map, and GPS based field data collection. According to results of the comparison, the paralellpiped classification method is proved to be appropriate method based on the overall accuracy of canopy classification, which was 54% due to heterogeneity of the vegetation.
The results of hyperspectral data and FPXRF analysis suggest that Pb, Zn and Fe containing minerals have similar spatial distribution in the examined and barren area.
Based on this study hyperspectral remote sensing is likely to be an effective tool for the characterization and modeling the distribution of Pb, Zn and Fe containing minerals at the examined heavy metal polluted sites. Further more, based on the vegetation analysis plant species for phytoremediation can be defined.
-
New wonder of an old hormone: Hungarian sour cherry varieties as natural melatonin sources
65-72Views:174Agriculture has always been an important role in economy, food supplies, sustainability of society During our experimental work an effective extraction procedure has been developed for melatonin. Further chromatography was developed the quantitative and qualitative determination of melatonin. A compound that was equal to the standard was purified from the extract by preparative HPLC technique and the structure of the purified sample was confirmed by MALDI-TOF-MS and NMR analysis. Based on our measurements, harvested in the state of biological maturity Hungarian sour cherry cultivars contain high levels of melatonin.
Our results show that "VN4" variety has extremely high melatonin content, 9.893 ug g-1 and suggest that "VN4" which were selected from the "Bosnyák" varieties is melatonin accumulating. The average value of the melatonin content of Hungarian sour cherry cultivars is 2.319 ug g-1.
-
New challenges in soil management
91-92Views:189Soil management represents two important tasks that are harmonization of the soil protection with demands of the crop to be grown on the given land under prevailing farming condition. Further goals are to preserve and/or develop the soil physical, biological and chemical condition and to avoid the unfavourable changes of the soil biological activity and the soil structure. Classical authors emphasised the importance of creating proper seedbed for plants. In the physical approach, tillage was believed to play an important role in controlling soil processes. Consequently, the period of several centuries dominated by this approach is referred to as the era of crop-oriented tillage (Birkás et al., 2017). The overestimation of the importance of crop requirements resulted in damaging the soils, which inevitably led to turn to the soil-focused tillage. Since the first years of climate change, as the new trends have raised concern, tillage must be turned into a climate-focused effort with the aim of reducing climate-induced stresses through improving soil quality.The development of soil management has always been determined by the economical background. At the same time, deteriorating site conditions have contributed to the conception of new tillage trends by forcing producers to find new solutions (e.g. dry farming theory in the past or adaptable tillage theory nowadays). Győrffy (2009) recited the most important keywords were listed in 2001 and that seemed to be important in the future of crop production. These keywords (endeavours) were as follows:− Biofarming, organic farming, alternative farming, biodynamic farming, low input sustainable agriculture;− Mid-tech farming, sustainable agriculture, soil conservation farming, no till farming, environmentally sound, environmentally friendly, diversity farming;− Crop production system, integrated pest management, integrated farming, high-tech farming;− Site specific production, site-specific technology, spatial variable technology, satellite farming;− Precision farming.Győrffy’s prognosis proved to be realistic and the efforts mentioned above have mostly been implemented. New challenges have also appeared in soil management in relation to the last decades. The most important endeavours for the future are:1) Preserving climate-induced stresses endangering soils.2) Turn to use climate mitigation soil tillage and crop production systems.3) Applying soil management methods are adaptable to the different soil moisture content (over dried or wet may be quite common).4) Use effectual water conservation tillage.5) Use soil condition specific tillage depth and method.6) Adapting the water and soil conservation methods in irrigation.7) Preserving and improving soil organic matter content by tillage and crop production systems.8) Considering that stubble residues are matter for soil protection, humus source and earthworm’ feed.9) Site-specific adoption of green manure and cover crops.10) Applying site-adopted (precision) fertilization and crop protection. Considering the development in agriculture, new endeavours will occur before long. -
The impact of applying foliar fertilizers on the health condition of maize
105-109Views:158The nutrient supply of plants is becoming more important in plant protection since the appropriate condition of plants can be ensured by optimal and satisfactory nutrient supply to avoid nutritional deficiency diseases. Due to the extreme weather conditions, plants are forced to face several stress factors, which leads to deterioration of the plant health. The increasing occurrence of droughts poses threat to nutrient uptake through the roots since all the nutrients can be accessible to the plants only if they are in dissolved form in the soil – which is not possible in the absence of water. Therefore, the importance of foliar fertilizer is becoming a more and more significant part of the nutrient supply, because with the help of this technology the development of any nutrient deficiency can be prevented.
In this experiment, we focused on the efficiency of two different foliar fertilizers on maize. Foliar fertilizers were applied two times, once in the stage with 8 leaves and tasseling phenophase of the maize. To verify the efficiency of the foliar fertilizers, the chlorophyll content of untreated and treated plant’s leaves was measured after each application. Moreover, the length and diameter of maize cobs, thousand kernel weight, protein, oil and starch content were also measured, and the results were compared to the untreated (control) ones. According to the results, in all aspects significant differences were observed and due to the laboratory analysis of leaves, in the case of magnesium and zinc supply the foliar fertilizers were able to prevent the development of nutrient deficiency.
-
Changes in the Quality of Winter Wheat Varieties in a Comparative Experiment
179-183Views:64The hungarian seed grain supply offers more and more varieties from the field crops for public cultivation in every year. The number of the admitted varieties by state doubled from 1996 to 2001. The question is what changes can the varieties newly inproved show in the quality parameters.
32 varieties admitted in different years was examined on quality parameters as wet gluten content, valorigraphic value and falling number from period 1996-2001. We established that the newer varieties surpassed the traditional varieties of the variety-comparativing experiment in accordion to they wet gluten content. In connection with formation of valorigraphical value we saw that the new varieties got place in the varieties admitted for public cultivation in quality based examining. The varieties showed different reaction of fertilizer on the formation of these two parameters. In connection with the formation of the value of falling number the examined varieties suited for the requirements of quality crop production in the experimental years excepted some of them. -
New methods of compost homogeneity determination in sewage sludge based compost prisms
49-52Views:127There is no effective method of homogeneity measurement of compost prism. The most frequently used technology is the examination of the particle distribution. This method needs a lot of time and large number of samples. The aim of our research is establishing different effective methods to determine the homogeneity of compost prisms. During our work, we examined the homogeneity of a prism made of sewage sludge and saw-dust mixture.
The measurements were based on the different properties of raw materials. According to this we examined the homogeneity by moisture content, heavy metal content and gas distribution measurements.
The most effective method is the measurement of gasconcentration. Although gas-concentration measurements it need special equipment it has more advantages than the other methods. The examination of gas-distribution compensates the problem of sampling because the measurement is direct. It provides the opportunity to estimate the amount of emitted toxic gases and to determine the maturity of the compost and the effectiveness of the degradation. -
The effects of fertilization on the protein related properties of winter wheat
67-69Views:128The yield and quality of wheat are mainly determined by the plant production system, thus we studied the effect of mineral fertilization.
The field trials were set up in 1983 at the Látókép Research Institute of the University of Debrecen. We examined effect of different Nfertilizer doses (60 kg ha-1 N/P/K, 120 kg ha-1 N/P/K) on Lupus, Mv Toldi and GK Csillag's protein properties in 2012. During the tests, three quality parameters were determined: wet gluten content (%), wet gluten spread (mm/h) and gluten index (%). In the experiment the effect of different doses of N-fertilizers significantly influenced by the wet gluten content and gluten index of Lupus.
-
The parameters of homemade jams after storage
39-42Views:136Nowadays producing jams is considered a traditional way of plum processing in Hungary. Plum jams without added sugar can be stored
This research aimed to analytically determine which quality parameters of the jams and to what extent they change during storage. Furthermore, this study intended to find out whether a concious consumer can presume any difference between varieties or the year of harvest, or wheather a one-time customer should suspect differences in quality parameters of the different products. This study focused on those differences or alterations in the parameters that occur in the jams made from several different plum varieties produced in different years.
I analyzed the classic chemical parameters (dry matter content and ash content) and physiologically important nutritional components (phenolic and flavonoids antioxidants and vitamin C). In this research I used jams which were produced from 6 varieties grown in 2009 (President, Tophit, Bluefre, Elena, Presenta, Stanley), 4 varieties from 2010 (President, Bluefre, Elena, Presenta) and 6 varieties from 2011 (President, Tophit, Bluefre, Elena, Presenta, Stanley). Jams were produced with traditional technology in cauldrons without added sugar. Jars were placed into a relatively dark and cool place and were stored there until the analysis.
Having regard to the results, when consumers choose between the different products they also choose quality since the processed plum variety, and the year of production/processing determine the nutritional value of the specific product. This could be used for market positioning and promotion of the product, however further research is needed to gain more information from the differences that derive from the varieties, year of harvest or other factors. This way fruit and jam producers could turn these informations into market advantage.
-
Effects of combined nutrient supply treatments on some physiological parameters of autumn wheat
241-251Views:137The Fleischmann Rudolf Research Institute in Kompolt is not only famous for plant breeding but the institute also surveys the effects of different nutrient supply methods since 1918. In 2017, we joined this research supported by EFOP 3.6.1 project. Our aim was to investigate photochemical processes – which is one of the most determinant in case of yield – of crops by in vivo field measurements. We measured the chlorophyll content of leaves using Minolta SPAD 502. We used miniPAM fluorometer to determine actual photochemical efficiency and non-photochemical quenching of PSII during natural light conditions and also to evaluate the pigment (chlorophylls and carotenoids) and water content of leaves we applied field spectrophotometer (ASD FieldSpecPro 3). We utilized these methods by various treatments (1. treatment with soil bacteria + head and base fertilizer; 2. treated by only head fertilizer; 3. treated by only base-fertilizer) in field experiment of autumn wheat (4.1–2.43–1.19 ha) in June, 2017. The difference between treatments was clearly detectable. In the case of the first treatment, physiological processes were more intense and the ripening occurred earlier. The obtained yield was the highest in the case of the area treated by soil bacterial. Based on the results, the first treatment can be recommended in practice.
-
The Effect of Mg Foliage Fertilization on Beetroot (Beta vulgaris ssp. esculenta var. rubra) Morphology, Quality Traits and their Relations
67-72Views:91Mg-treatment increased solid soluble content in roots probably due to the larger assimilation area.
The applied foliage fertilization affected inner colour intensity and uniformity in roots positively.
The 2% Mg-sulphate solution affected pigment quantity favourably depending on varieties.
Close correlation (r=0,71) was found between the yellow (BX) and red (BC) pigments which indicates a similar biosynthetic pathway of the two compounds.
The Mg-sulphate foliage fertilization improves quality considerably but the individual reaction of varieties needs further studies. -
Relation of availability and barley uptake of some potentially toxic elements
7-10Views:70A small-plot microelement load field trial was set up on brown forest clay soil with eight elements (Al, As, Cd, Cr, Cu, Hg, Pb, Zn), on 3 levels each (0/30, 90, 270 kg element ha-1). The soil was treated with soluble salts of elements once at initiation (1994). In the seventh year of the experiment (2001) winter barley was the test plant. The total element content was determined in plant samples (shoot, straw, grain) after microwave digestion using cc.HNO3+cc.H2O2. The element composition of the prepared samples was determined using ICP-MS technique. In the experiment toxic effects of treatments and yield loss could not be observed. Zn and As contents in barely shoots were only moderately increased by increasing microelement loads. Effects of Cr, Cu, Hg, Pb and Al treatments could not be observed. On the other hand, Cd accumulation was significant in the shoot. Cd content was also increased both in straw and grain. Results of this experiment prove that Cd remains mobile in the soil-plant system for a long time. Its accumulation can be observed both in vegetative and reproductive parts of plants without toxic symptoms and yield loss.
-
The effects of the nanoselenium supplementation to the production parameters and the selenium retention of the red drum (Sciaenops ocellatus)
43-48Views:196The selenium is an essential trace element with antioxidant effect, constituent of many enzymes, natural component of the body of the animals. The addition to the fish feed as micro element supplementation is generally accepted. Numerous animal experiments veryfied, that the antioxidant effect of the nanoselenium is higher than other selenium forms. But no much information is available of the usuage at fish.
In the experiment were investigated the effects of the nanoselenium supplementation of a commercial fish feed were investigated to the production parameters and the body tissue composition. The correlation between the accumulated selenium content of the body and the treatment, and the feed conversation was also statistically analyzed beside the production parameters. Furthermore we were curious, if can be toxic the nanoselenium in higher doses.
The experimental stock was placed into 12 plastic tanks (each 70 l water vol.) in a recirculation system for larval rearing. The salinity and the water temperature was constant during the 8 week long experiment. The feeding was ad libitum, 4 times a day. Beside the control five (1, 1.5, 2.5, 5.5, 10.5 mg Se kg-1) duplicated treatment were set.
According to the results, from the production parameters only at the value of FCR and the survival was found significant difference (p<0.05) between the groups. However strong correlation (r=0.752–0.780, p<0.01) was determined between the treatment and the accumulated selenium levels. To analyzed the free fatty acid contentof the fish, we realized, that the selenium uptake significanly enhanced this level at all treatments. The greatest change was found in case of the type n-3 fatty acids.
Established by the results, the higher intake than 0.5 mg Se kg-1 was not changed significantly the production parameters, nevertheless to increase the selenium content of commercial feeds to 1.5 mg Se kg-1 could be rewarding on the rearing of red drum.
-
Rheological evaluation of industrial tomato
137-140Views:119Today, tomato has the second largest harvesting area globally, and the fourth largest in Hungary. The importance of industrial tomato is growing year by year, and one of the most important tasks is to satisfy the needs of the industry. To meet these needs, the producer has to find the proper genotype, which can achieve up to 100 t ha-1 crop yield. This quality has high importance to be researched.
The experiment was carried out in the Botanical and Exhibition Garden of the University of Debrecen, with 3 examined genotypes. The planting date was 3 of May 2018. The harvesting was two-threaded. On 27 of July the physical parameters – fruit shape index (length/diameter), firmness (kg cm-2), water-soluble dry matter content (Brix%) and weight of the berries (g) – were evaluated. On 15 of August the rheological parameters were examined – the force needed to tear the skin – bioyield point (g) and flesh firmness (g).
The fruit shape index was oval (between 1.19 and 1.24) for all the examined genotypes. The firmness was between 0.92 (UG1122713 F1) and 1.05(Prestomech F1) kg cm-2, which compliance the needs of the industry. The water-soluble dry matter content was suitable, with a value between 4.49 (Prestomech F1) and 4.65 (UG1122713 F1) Brix%. The weight of the berries was between 45.94 (UG989 F1) and 49.37 (Prestomech F1) g per piece.
The bioyield point was between 76.00 (UG1122713 F1) and 85.16 (UG989 F1) g. The flesh firmness was between 33.68 (UG1122713 F1) and 42.81 (UG989 F1) g.
Finally, we can conclude based on the obtained data that the UG989 F1 hybrid was the most proper for the applied cultivation conditions. This genotype can be recommended for the farmers even in extreme weather conditions.
-
Challenges and limtations of site specific crop production applications of wheat and maize
101-104Views:120The development and implementation of precision agriculture or site-specific farming has been made possible by combining the Global Positioning System (GPS) and the Geographic Information Systems (GIS). Site specific agronomic applications are of high importance concerning the efficiency of management in crop production as well as the protection and maintenance of environment and nature. Precision crop production management techniques were applied at four locations to evaluate their impact on small plot units sown by wheat (Triticum aestivum L.) and maize (Zea mays L.) in a Hungarian national case study. The results obtained suggest the applicability of the site specific management techniques, however the crops studied responded in a different way concerning the impact of applications. Maize had a stronger response regarding grain yield and weed canopy. Wheat was responding better than maize concerning plant density and protein content performance.
-
The changes of the most important quality parameters of szegedien triticale cultivars in long-term fertilization trials
21-26Views:183We were monitoring the quality changes of 2 triticale cultivars from Szeged (GK Rege and GK Szemes) in Fülöpszállás, Hungary, in a longterm fertilizer trial in 2012/2013 and 2013/2014. The following fertilizer combinations were used: untreated control, single applied N and single applied PK, 30 and 60 kg ha-1 N or PK, and N and PK together in 30:30, 60:60 ha-1 ratio. We measured the following quality parameters: kernel hardness, crude protein content and farinograph quality number for wholemeal flour.
Based on the results, the N fertilization treatment was beneficial to the tested triticale culticars in terms of kernel hardness and protein content as both indicators increased. The efficiency of the treatment was proportional to the N dose rate. On the other hand, the applied PK treatment decreased the kernel hardness and crude protein values. On these two parameters, the PK free, and high N dosage treatment (N60P0K0) had the most positive effect. However, the single applied N dose had no significant effect on farinograph quality numbers of the wholemeal flours, but PK dose had significantly positive impact on the tested cultivars. The N30P30K30 treatment resulted in the highest farinograph quality number, thus the low PK and low N combination was the most efficient treatment. The correlation analysis of the tested quality parameters showed positive correlation (0.9965***) between kernel hardness values and crude protein contents. Nevertheless, we found strong negative correlation between kernel hardness values and the farinograph quality number of the wholemeal flours (-0.9720***), as well as in the case of crude protein contents and farinograph quality number of the wholemeal flours (-0.9796***).
-
Microgreen leaf vegetable production by different wavelengths
79-84Views:147Microgreens are becoming more popular in gastronomy, especially as a salad ingredient. In this study, two plant species belonging to the cabbage family were grown as microgreens, namely red cabbage and broccoli. Three different light-emitting diodes (LEDs) were used in the experiment, blue, red, and combined (blue:red) lighting. The experiment was carried out by 118 µmol-2 s-1total Photosynthetic Photon Flux (PPF), LED lighting was applied for 16 hours a day. Blue light primarily stimulates leaf growth, while red light promotes flowering. In our experiment, blue and combined lighting favorably affected plant development, yield (~3000 g m-2), chlorophyll-a (~8.0 mg g-1), and carotenoid content (9.0 mg g-1). However, the red light resulted in reduced harvest yields (~2200 g m-2), chlorophyll-a (~6.0 mg g-1), and carotenoid content (~7.0 mg g-1). The development of red cabbage was favorably influenced by the blue spectrum, while the combined spectrum favorably influenced the development of broccoli.
-
Risk effects of the spread route of mycotoxins
90-95Views:89In Hungary the mycotoxin is a great problem, because there are many natural toxins in wheat and maize. These cereals can be found on
considerable proportion of the country’s sowing area, and they are deterministic food for the population. The direct human and animal
utilization of the contaminated cereals mean a serious risk in the food chain. In Hungary’s climate the soil is contaminated with pathogen
moulds, particularly Fusarium species, which increase by respective temperature and moisture content in cereals. The Fusarium can
decrease the quality of the wheat in different ways: decrease the germination capability and cause visible discoloration and appearance of
mould, reduces the dry material and nutrient content of the grain. From the toxins produced by the Fusarium genus, the trichotecene (T-2,
HT-2, deoxinivalenol, nivalenol, diacetoxyscxirpenol, Fusarenon-X) and the estrogenic zearalenon (F-2) are the most common in Hungary.
The fumonisins (FB1, FB2, FB3) first identified in 1988, relatively newly discovered, are also important. Major proportion of mycotoxins in a
healthy organization is metabolized by the enzyme system of liver and intestinal bacteria. The toxicity is reduced or even leaves off.
However, more toxic and biologically active compounds can be formed. For the reduction of mycotoxin-contamination several possibilities
are available in the case of storage, processing and feeding. -
Usage of Different Spectral Bands in Agricultural Environmental Protection
123-126Views:82Hyper and multispectral imaging systems are widely used in agricultural and environmental protection. Remote sensing techniques are suitable for evaluating environmental protection hazarsd, as well as for agriculture resource exploration. In our research we compared aerial hyper and multispectral images, as well as multispectral digital camera images with the background data from the test site. Hyperspectral records were obtained using a new 80-channeled aerial spectrometer (Digital Airborne Imaging Spectrometer /DAIS 7915/. We have chosen two farms where intensive crop cultivation takes place, as test sites, so soil degradation and spreading of weeds can be intensive as a result of land use and irrigation. We took additional images of air and ground with a TETRACAM ADC wide band multispectral camera, which can sense blue, green and near infrared bands. We had detailed GIS database about the test site. Weed and vegetation map of the area in the spring and the summer was made in 2002. For soil salt content analysis, we gathered detailed data frome an 80x100 m area. When analyzing the images, we evaluated image reliability, and the connection between the bands and the soil type, pH and salt content, and weed mapping. In the case of hyperspectral images, our aim was to choose and analyze the appropriate band combinations. With a TETRACAM ADC camera, we made images at different times, and we calculated canopy, NDVI and SAVI indexes. Using the background data mentioned above, the aim of our study was to develop a spectral library, which can be used to analyze the environmental effects of agricultural land use.
-
Behavior of some Hungarian wheat varieties to seed soaking in gibberellic acid under salt stress
7-17Views:189Various abiotic stresses including high salinity strongly affect seed germination. Three Hungarian wheat landraces Gamási, Fóti and Kartali have been tested for seed germination, seedling growth and chemicals parameters when seeds were soaked in gibberellic acid (GA3) at the concentrations of 0, 75 and 150 ppm and at four levels of salinity stress 0, 5, 10 and 15 dSm-1. A laboratory experiment took place at Research Institute of Nyíregyháza. Factorial Experiment based on Randomized Complete Block Design (RCBD) in four replications has been conducted. Seed soaking in GA3 before sowing significantly affected germination characteristics, seedling properties and the results of chemical analysis. The highest germination as well as K+ content of seeds were observed at seed soaking into 150 ppm GA3. However, Na+ and proline contents in seedling were decreased. The behavior of the tested Hungarian wheat varieties was genotype-dependent. Increasing salinity stress up to 15 dSm-1 significantly affected germination characteristics, seedlings parameters and chemical analysis. Fóti variety turned out to be the best at 150 ppm GA3 compared to the other two varieties. Moreover, it had the lowest Na+ and proline contents and highest K+ content.
-
Changes of Quality of Winter Wheat During Maturing
105-112Views:84We analysed the flour of two winter wheat varieties to determine the effect of maturity state and grain position in the ear on the element composition of flour. Samples were taken from the 14th to the 42th day of anthesis. Ear samples were cut into three (basal, central and apical) parts, the trashed grains were milled, and the element compositions of the flours were determined.
We found that the grain position within the ear has an effect on flour element content. Flours of apical grains had lower nitrogen, phosphorus and sulphur contents than flours of central and basal grains. The nutrients can be divided into two parts, based on the formation of element content during maturation. Nitrogen, sulphur and copper contents changed continuously during maturity, while the P, K, Ca, Mg, Mn, Sr and Zn contents decreased until a specific value and became nearly constant in the second half of maturity. We found that – although the nitrogen concentration of flours changed continuously – the amount of nitrogen in the flours reached a constant value for the second half of maturity. -
Element content analyses in the Institute for Food Sciences, Quality Assurance and Microbiology
203-207Views:111The role of chemical elements to ensure and promote our health is undisputed. Some of them are essential for plants, animals and human, others can cause diseases. The major source of mineral constituents is food, drinking water has a minor contribution to it, so the knowledge of elemental intake through food is crucial and needs continuous monitoring and by this way it promotes the food quality assurance and dietetics.
With the evolution of spectroscopic methods increasingly lower concentrations could be determined, so the elemental composition of a sample could be more precisely and fully described. Due to the results the gathered knowledge up to the present is supported and new observations can be done helping us to understand such complex systems as biological organisms are.
The quality of a food is determined by the full process of its production, consequently it starts with agricultural production so elemental-analysis usually cover the whole soil – plant – (animal) – food chain, by this way the „Fork-to-Farm” precept is true in elemental analysis field also.
The history of elemental analysis in the University of Debrecen, Centre for Agricultural and Applied Economic Sciences, Faculty of Agricultural and Food Sciences and Environmental Management, Institute of Food Processing, Quality Assurance and Microbiology goes back to 1980s when the so called Regional Measurement Central gave the background for research. The continuous deployment resulted in an obtain of an inductively coupled plasma atomic emission spectrometer (ICP-AES) in 1988, which extended the scope of examinations due to its excellent performance characteristics
compared to flame atom absorption (FAAS) and flame emission spectrometers (FES). The instrumental park retain up to date correlate to the developing analytical techniques due to acquiring a newer ICPAES in 1998 and an inductively coupled plasma mass spectrometer in 2004 – which sensitivity is three order of magnitude better compared to ICP-AES. The Institute supports the work with its own ICP-AES and ICP-MS since 2011. -
Selenium speciation analysis of selenium-enriched food sprouts
23-28Views:183In this present study, we prepared selenium-enriched pea and wheat sprouts. During our research we aimed not only to measure the total selenium content of the sprouts but to identify different selenium species.
Scientifical researches show why the analytical examination of different selenium (Se) species is necessary: consumption of all kind of Se-species is useful for a person who suffers in selenium deficit, while there is significant difference between effects of different Se-species on person, in whose body the Se-level is just satisfactory. Biological availability, capitalization, accumulation, toxicity of Se-species are different, but the main difference was manifested in the anti-cancer effect of selenium.
During our research selenium was used in form of sodium selenite and sodium selenate, the concentration of the solutions used for germination was 10 mg dm-3. Control treatment meant germination in distilled water. Total selenium content of sprout samples was measured after microwave digestion by inductively coupled plasma mass spectrometry (ICP-MS). Different extraction solvents were applied during sample preparation in order to separate different Se-species (0.1 M and 0.2 M HCl or 10 mM citric acid buffer). We wanted the following question to be answered: Which extraction solvent resulted the best extraction efficiency? Selenium speciation analysis of sprout sample extracts was performed by high performance liquid chromatography with anion exchange column, detection of selenium species was performed by ICP-MS.
Evaluating our experimental results we have been found that significant amount of selenium of inorganic forms used during germination transformed into organic selenium compounds. There was difference between the amount of Se-species in pea and wheat sprouts and selenium uptake and repartition of selenium species were depended on Se-form used during germination. In addition the chromatogram analysis made us clear as well, that the citric acid solvent proved to be the most effective extraction solvent during sample preparation int he view of organic Se species.
-
Determining the antioxidant compounds of beer
5-10Views:298The increasing consumption of beer indicates the necessity of the thorough analysis of its composition. In this study, the total phenolic content, flavonoid content and colour intensity of 24 beer samples have been determined. The samples contained pale barley, dark barley, pale wheat and dark wheat beers. The aim of the study was to determine the amount of the antioxidant compounds in beer, as well as to find correlation between different beer types and the above mentioned parameters.
Dark barley samples contained phenolic compounds in the highest concentrations, and it can also be concluded that dark beers contain phenolic compounds and flavonoids in higher concentrations than pale beers in the case of barley and wheat samples.
According to the performed statistical analysis, these beer types cannot be differentiated based on the analysed parameters. The highest percentage of correctly classified samples could be observed in case of dark barley samples, but this value has only been 75%, and the total result of correctly classified cases was only 41.7%. The analysis of more samples and parameters is required to carry out a successful differentiation.
-
Impact of nitrogen and sulphur fertilization on the growth and micronutrient content of spring wheat (Triticum aestivum L.)
211-219Views:166Micronutrients are as important as macronutrients for crops. Each micronutrient has its own function in plant growth. Zinc is important for membrane integrity and phytochrome activities. Copper is an essential micronutrient required for the growth of wheat. Manganese is required for enzyme activation, in electron transport, and in disease resistance. The pot experiment was set up in greenhouse on calcareous chernozem soil Debrecen-Látókép with a spring wheat. In certain development stages (according to BBCH growth scale of wheat), at the beginning of stem elongation (29–30), at the heading (51–59), at the flowering (61–69) stage three average plants were removed from all pots for analysis. Fresh and dry weight of the plant samples were measured. Plant leaves after drying were digested by HNO3-H2O2 methods and manganese, zinc and copper contents of plant were quantified by atomic absorption spectrophotometry. At the flowering stage, when the nutrient uptake of plants is the most intensive, the weight of wheat ranged between 0.94–1.57 g plant-1. In this development stage, the NS2 treatment produced the highest weight of wheat, and compared to this the NS3 treatment decreased that value already. The results show unfavourable effect of NS3 treatment. On the basis of microelement content of wheat and the weight of a plant, nutrient uptake by plant were calculated. At the beginning of growth the starter treatment had positive effect on Cu-uptake compared to the NS1 treatment, where the same dose of fertilizer was stirred into the soil. Wheat is very sensitive to copper deficiency, so copper dissolved by starter treatment could be favourable to the early development of wheat. At flowering stage the Zn-uptake of wheat became the highest and it was between 133.7–234.6 mg plant-1. The Mn-uptake of wheat plant was higher than the Cu- and Zn-uptake of wheat.
This phenomenon can be explained by the fact that the untreated soil had higher Mn-content, than Cu- and Zn-content. To summarize the results, it can be stated, that the copper uptake of wheat was more affected by the different treatments in the stage of stem elongation, while Mn- and Zn-uptake of wheat were influenced primarily in the stage of heading and flowering.