Search
Search Results
-
Comparison of the technological background of aquaponic systems
47-52Views:811Aquaponics is the combined culture of fish and plants in recirculating aquaculture systems, an ecologically sustainable horticultural production technique with long traditions.
The objective of this study is to compare flood-and- drain, and the water crossflow system and examine the differences in the water quality, fish yield and plant growth parameters for Common carp (Cyprinus carpio) and basil (Ocimum basilicum). During the study, water quality parameters of two treatments were compared in temperatures, pH, EC and NO3¯N were significantly different (p <0.05). Leaf area of the basil plants grew to an average of 20.37 cm2 (± 9.02 cm2). The plants’ biomass production was significantly different (p< 0.05) in the two systems. The biomass production showed lower yield, 458.22 g (± 214.59 g) in the constant flow system that in the flood- and- drain system 692.9 g (± 175.82 g). Fish Growth parameters were better in constant flow system (FCR 5.48 g/g ± 0.19). However, the specific growth rate (SGR) demonstrated that fish grew faster in flood- and- drain system 1.38 %/day (± 0.29).
-
Analysis of the photosynthetic parameters, the yield and the quality of winter wheat
101-106Views:434The environmental adaptability of crop production is basically determined by the selection of biological background (plant species and
varieties) suitable for the region and the site. The aim of our work is to parametrize the plant assimilation, its intensity, dynamics and the
most important characteristics and the relationships to the quality in winter wheat trials. The measurements were carried out at the research
site of the University of Debrecen in small parcel experiments. We measured the leaf net CO2 assimilation rate, stomatal conductance,
intercellular CO2 level, the transpiration, the leaf temperature and the air temperature by the LICOR LI-6400 portable photosynthesis
system in field trials on the nutrient supply. The soil of the experimental area is calciferous chernozem with favorable water regime.
We have examined the photosynthetic activity, the productivity and yield stability of winter wheat varieties. We have compared the yield
results, at similar agrotechnical conditions in seven cropyears. We also determined the quality parameters of the winter wheat varieties.
Then we valued the yield stability of genotypes with the help of analysis of variance and linear regression equations. We have defined the
connections between assimilation parameters, the yield stability and quality parameters of wheat varieties. -
Energy crops on less favoured (alkaline) soil
115-118Views:262The reduction in fossil energy and row material sources induces growing demand for renewable resources. The growing demand for herbal raw materials has land use impacts as well. One way to reduce the conflict between the food and energy crops can be the utilization of less favored areas by growing energy crops. Among the potentially available areas for this purpose the salt affected soils (SAS) occupy a significant territories. SAS with structural B-horizon (meadow solonetz soils) represent the most wide spread group of SAS in Hungary. About half of these soils have been reclaimed and used as arable land and the remaining 50% are used as grassland. Sweet sorghum production for manufacturing of alcohol production was investigated in a long term amelioration and fertilization experiment on a salt affected soil (meadow solonetz). By means of regression analyzes the effect of sodium content of the soil and increasing mineral fertilizer doses were studied. According to the multiple regression analysis only the effect of nitrogen fertilizer was significant. On the solonetz type salt affected soil the effect of water soluble salt content of the soil was not significant, but there was a closer correlation between the ammonium-lactate sodium content and the yield of sweet sorghum. The maximum green mass was 45–50 t ha-1, in the case of low Na content and high level of nitrogen fertilization.
In order to quantify the potential yield of natural grass vegetation the relationship between the soil forming processes and the grass vegetation
was investigated. Beyond the different forms of Na-accumulation, the spatial pattern (mosaic-like characteristic) is also an inseparable feature of salt affected soils. The difference in the water regime, caused by the micro-relief is the main cause of variability. The run-on water keeps the deeper parts of the catena position wet longer. The wet situation causes more intensive leaching. In the low-laying parts of salt affected soils species preferring wet situations (mainly Alopecurus pratensis) are in majority. On the higher parts of the micro-relief species tolerating dry situations (mainly Festuca pseudovina) are dominant. The yearly grass production of low laying areas can be 4–7 t ha-1 but because of prolonged wet conditions the grass is not grazed and mowing can only be in old state. This old grass is not proper for feeding, but it may be suitable as energy plant. -
Characteristics of Land Use and Plant Production in Transcarpathia
290-294Views:148The character of plant cultivation and animal husbandry in different parts of Transcarpathia, are mostly determined by the location of a given region. Usually, four zones are delineated: 1. lowlands; 2. foothills and volcanic remains zone; 3. inter-mountainous subsidence and deep valley; 4. mountain zone.
In county this zone divides quite visibly. By studying the soil, climatic conditions and plants, it is not difficult to see that the vertical zones play a major role in their characteristics and formations. If we go from lower to higher elevations, we can observe the qualitative difference in the environment and, of course, in the character of agriculture.
Environmental pollution is a global problem of our age. In agriculture, the most important thing is to preserve the ideas of sustainable development, because only these can ensure the protection of production resources, which will ensure the continuous production of agricultural products. Present environmental conditions pose a more problematic challenge to agriculture. -
Maize nutrient dynamics: growth, yield and sustainable practices: A narrative review
83-91Views:384Nutrient acquisition is the fundamental regulator of maize (Zea mays) growth, development, and yield. The present narrative review intends to integrate existing information on dynamics of nutrient uptake in maize under scrutiny for understanding how the processes affect growth and yield. We focus on the effective absorption and utilization of macronutrients (N, P and K) and micronutrients that promote plant health, grain development, and stress tolerance. Key determinants of nutrient availability (soil type, pH, organic matter, environment) and physiological or yield impacts of deficiency are studied. Strategies to optimize uptake efficiency precision application of fertilizer, organic fertilizers, and sustainable soil management are discussed. Optimizing these dynamics is central to maize productivity, enhancement and sustainable crop production. This review provides valuable insights into optimizing maize nutrition for improved food security and sustainable crop production.
-
Nutrient Uptake of Miscanthus in vitro Cultures
23-24Views:251The large biomass production and the low necessary input fertilizer make Miscanthus an interesting, potential non-food crop with broad applications, e.g. for fuel and energy, for thatching, fiber production, for the paper and car industries, as well as for ethanol production.
Axillary buds of Miscanthus x giganteus were placed on a shoot inducing nutrient solution (modified Murashige and Skoog, 1962), basic medium supplemented with 0,3 mg l-1 6-Benzylaminopurin. After 40 days of culturing, the axillary buds produced three times more shoots than could normally be harvested. The nutrient content (N, P, K, Ca, Mg) was measured several times during culturing. The results showed that, after 35 days, nitrogen and phosphate were nearly completely taken up. From that time, shoot growth was not observed.
After shoot propagation, the plants were transfered into a nutrient solution for root formation (modified Murashige and Skoog, 1962), basic medium supplemented with 0,5 mg l-1 Indole- 3-Butyric acid, and could be potted in soil after about 14 days. -
The effects of drought stress on soybean (Glycine max (L.) Merr.) growth, physiology and quality – Review
19-24Views:430Abiotic stresses are one of the most limiting factors inhibit plant's growth, leading to a serious production loss. Drought stress is one of the most destructive abiotic stresses and is still increasing year after year resulting in serious yield losses in many regions of the world,
consequently, affecting world’s food security for the increasing world population. Soybean is an important grain legume. It is one of the five major crops in the world, an essential source of oil, protein, macronutrients and minerals, and it is known as the main source of plant oil and protein. Harvested area of soybean is increasing globally year after year. However, soybean is the highest drought stress sensitive crop, the water deficit influences the physiology, production and seed composition of this crop. We introduce a review for literatures concerning the changes of the above traits of soybean exposed to drought stress, with past explanations for these changes. -
Potential use of bamboo in the phytoremediation in of heavy metals: A review
91-97Views:915There are many literature sources focusing on the phytoremediation of woody plants, but there are only few dealing with the phytoremediation of bamboo plants. Phytoremediation technology has the advantages of little disturbance to the environment and low remediation cost. Bamboo mainly exists in tropical and subtropical regions. As an energy plant, bamboo has a fast growth cycle, large biomass, simple cultivation, high economic efficiency, and convenient harvesting, which highlights the advantages of bamboo in phytoremediation. In addition, bamboo plants have good tolerance and uptake ability to heavy metals and have high application potential and development value in uptaking heavy metal contaminated soil. However, due to climate, temperature and other reasons, bamboo cannot be widely planted in most countries. Research status of remediation of heavy metal contaminated soil by bamboo plants is summarized. The feasibility of its application in heavy metal contaminated soil is discussed in this paper. Aiming at the shortcomings of existing research, bamboo plants have a prospect in the field of plant phytoremediation for the future.
-
Vegetable production based on waste heat in closed greenhouses considering economic usage and competitiveness of the European Union
41-44Views:219The study investigates two professional fields; the questions of vegetable production in greenhouses, the necessary steam supply and heat regulations. The actuality of this investigation is provided by the planning of a combined cycle power plant of 2400 MW in Hungary. According to the plans the steam developing by generating electricity in the power plant can be used to intensify the vegetable production. In my current study I present the experiences and results gathered as member of the research and development team led by Mr. Dr. Sinórós-Szabó.
-
Stevia (Stevia rebaudiana B.) yield in the case of different production technologies
71-77Views:427Stevia rebaudiana B. offers a natural alternative of sweetening, potential health promotion plant, and our country shows increased interest about cultivation in Hungary in addition to the neighboring European countries. The agricultural production system installation necessary
understanding of the needs of the plant, as well as exploring the agronomic potential. Field experiments were conducted in 2015 with the aim to highlight some of the technological production parameters and correlations between them. We have reviewed the most important agronomic factors, the spacing (50×50 cm and 33×33 cm), ground covering (agro-cloth covered and uncovered/ control), their vegetative growth (first-,second-order branch), herb yield and quality in effect.
Based on empirical evidence, that the Hungarian climates also have the opportunity of 3 cuttings during a growing season, besides of early planting, optimal climatic conditions (in October didn’t reduce the daily minimum temperature below 0 °C, after cuttings the maximum interval values remain below 40 °C), and adequate water supply and crop protection facility. The 33×33 cm spacing evaporates more than 50×50 cm spacing, because of the dense population, the continuous canopy less able to breathe, so there are serious chances to the pathogen colonization.
Based on the results of our research to the wider 50×50 cm spacing favorable appreciate the stevia optimal progress in terms of qualitative and quantitative parameters of the yield. The stevia yields produced in the Northern Great Plains field cultivation can produce similar results as stevia crop yields in warmer climates, where the primary crops. Our research experience suggest that there is a viable domestic stevia cultivation, developing the necessary technology is still growing further investigation justifies. -
Change of cultivation parameters of asparagus (Asparagus officinalis L.) on different nutrient systems
67-71Views:413The experiments were conducted at the Research Institute of Nyíregyháza, Research Institutes and Study Farm, Centre for Agricultural Sciences, University of Debrecen. We have studied the shoot number, plant height and fold thickness os asparagus for 3 years. We have set a fertilization experiment on 1500 m2 of plantations in 2013. We applied fertilizer, manure and sheet manure compost. The set yield we achieved by using fertilizer treatment. The Vitalim produced the largest crop, then the Cumulus and the lowest yield Grolim. We was produced by highest green mass was observed in Vitalim and Cumulus hybrids in each year. The Grolim hybrid produced the smallest shoot and plant height but the fold thickness was longer in the other two hybrids. Overall, the Vitalim hybrid has the best production parameters and each season.
-
Study of some physiologic properties of different genotype sweet corn hybrids
105-110Views:233The effect of nutrient-supply (control, N120+PK) and two different genotypes on the physiologic properties of sweet corn has been investigated in the crop-year of 2011 on chernozem soil in the Hajdúság region. The experiments were carried out at the Experimental Station of the University of Debrecen in Debrecen-Látókép. The experiment was sewn in two different sowing times: the 21st April can be considered as an early, while the 19th May as a late sowing time. The two involved hybrids were Jumbo and Enterprise. The applied plant density was 65 000 plants per hectare.
Our aim with this experiment was to study the plant production, just as the main affecting factors of its development and dynamics, like nutrient-supply and genotypes. We aimed to study and analyse the relationships between these factors and plant production. In this study following parameters were measured and calculated: photosynthetic activity, chlorophyll-content (SPAD-value), leaf area index (LAI) and leaf area duration (LAD). Regarding the analysis of photosynthetic activity values no obvious relationship between the measured values and the applied hybrids, just as nutrient-supply has been revealed.
Analysing the SPAD-values it can be stated that the chlorophyll-content of the measured leaves showed an increasing tendency due to the nutrient-supply. The highest values have been measured in the intensive cob development phase of the early sowing time plots.
Regarding the LAI-values we have found significant differences between the fertilizer treatments in both sowing time treatments. In case of the leaf area duration values – that is derived from the LAI values – nutrient-supply has positively affected the duration of the assimilation area. -
Food safety of plant origin food
161-164Views:478Expectation regarding changes related to food production, transportation, distribution and marketing have changed considerably in several regions of the world over the past decades. It is especially true for highly industrialized countries where not only the food security is important but the food safety is essential too. The concentration of production – processing – distribution involves the danger on the one hand products of unsuitable quality from point of view of nutritional physiology and the other hand ones that may contain substances harmful to human health will become widespread among consumers. We investigated the heavy metal, pesticide remains and mycotoxin content of different plant products.
-
The effect of irrigation on the yield and quality of maize (Zea mays L.) hybrids
143-147Views:362In this study, the effect of water supply on the quality and productivity of different maize hybrids was observed.
Maize production is influenced by many agro-technical factors such as nutrient supply, plant density, environmental factors, water supply and temperature. Good soil quality and adequate technology significantly reduce the unfavourable effect of crop year. The impact of fertilization, crop rotation, irrigation and plant density on maize yield was greatly affected by crop year and crop rotation. The main constituent (69–75% dry matter concentration) of maize seed is starch, however, its increase can be achieved only to a limited extent, as increasing the starch content will reduce other parameters, especially protein content. Significant nutrient content improvements can be achieved by appropriate hybrid-site connection and the use of adequate technology. Protein content reduction with optimal water supply can be positively influenced by the appropriate nutrient supply for the hybrid.
The experiments were carried out at the Látókép Experimental Site of Crop Production on calcareous chernozem soil. The weather of the examined year, which was partly favorable for maize and partly unfavourable in other respects, was also reflected in the development of maize and yields achieved.
In 2019, we were examining the hybrids of Kamaria (FAO 370), P 9903 (FAO 390), DKC 4351 (FAO 370) and KWS Kamparis (FAO 350–400). Due to the dry soil condition, sowing was delayed, however, the hybrids emerged ideally because rain arrived soon after sowing, which facilitated initial development. Young plants evolved rapidly and dynamically in the case of all hybrids. In terms of heat-demanding bread, the month of May was unfavourable to temperatures below the annual average, but the higher amount rainfall helped the development. However, due to the drier period in early July, 25–25 mm of irrigation water was applied to half of the experimental areas on July 1 and 15.
The aim of our research was to determine the best population density for hybrids under favourable soil conditions (calcareous chernozem soil). In both irrigated and dry conditions, a crop density of 75,000 crops were the most favourable for the Kamaria hybrid. The P9903 hybrid in the case of a crop density of 85 crops proved to be ideal and the DKC4351 had an optimal population density of 95,000.
However, it should be taken into consideration that, in the case of soils with poor water management, the drought sensitivity of the crop stand may increase at a population density of 95,000.
As a result of irrigation, yield increased and the difference between the examined plant numbers decreased. The yield growth was relatively moderate (341 kg ha-1 – 1053 kg ha-1), which makes the economicalness of irrigation doubtful in the given year.
-
Effect of sowing technology on the yield and harvest grain moisture content of maize (Zea mays L.) hybrids with different genotypes
17-22Views:278From the aspect of the efficiency of maize production harvest grain moisture content shall be considered beside the amount of harvested grain yield. Hybrids with different genotypes and vegetation period length lose their moisture content different that is affected by row spacing and plant density – among agrotechnical production factors – depending on the given crop year. In the present research work three crop years with different weather conditions were studied (2013, 2014, and 2015). The small-plot field experiment was set up at the Látókép Field Research Centre of the University of Debrecen, Centre for Agricultural Sciences with four replications on a chernozem soil type. The effect of three factors was analysed in the experiment on yield amount and its moisture content. Factors were row spacing (45 and 76 cm), plant density (50, 70 and 90 thousand plants ha-1), while hybrids were of very early (Sarolta: FAO 290), early (DKC 4014: FAO 320, P 9175: FAO 330, P 9494: FAO 390) and medium (SY Afinity: FAO 470) ripening.
In the crop year of 2013 the highest yield was produced – regarding the average of the hybrids – by the application of a row spacing of 45 cm (4.5%, 673 kg ha-1), however there was no significant difference between the yield of the populations of different row spacings. Significant difference (14.9%, 1751 kg ha-1; 6.3%, 583 kg ha-1) could be found in case of yield between different row spacing applications in 2014 and 2015. The effect of insufficiently distributed low amount of precipitation and lasting heat days in 2015 could be revealed in yield amounts and harvest grain yield moisture content results that were lower than in the previous years. In 2015 grain yield moisture content varied between 10.3 and 13.9% in case of a row spacing of 45 cm, while by 76 cm between 11.0 and 13.9%.
-
Biomethane production monitoring and data analysis based on the practical operation experiences of an innovative power-to-gas benchscale prototype
399-410Views:635Power-to-gas (P2G) is referred to technologies that convert carbon dioxide into methane. Both bio- and chemical catalysts may be used for conversion purposes. One of the most disruptive biotechnologies was developed by the University of Chicago (IL) (publication number: EP2661511B1), using a robust, highly selective, patented strain of Archaea. Electrochaea GmbH has developed an innovative bench-scale P2G prototype unit, which uses this highly efficient Archaea strain, specialized components and specifically developed control strategies. The structure and the components of the prototype are equivalent with the functional parts of the currently largest commercial scale biomethanation BioCat plant located in Avedøre, Denmark (www.biocat-project.com). Power-to-Gas Hungary Kft. has committed to further develop this innovative technology. The first steps of this development have been taken by operating the benchscale unit and analyzing the data of the operating periods.
The prototype is operated based on weekly campaigns. During continuous operation, H2O is generated as a by-product of methane. Therefore, approximately 200 ml of biocatalyst is discharged each day and concentrated media containing macro and micronutrients are injected into the reactor to maintain media composition. The laboratory staff records all gas composition data each morning. The gas composition is measured every 12 minutes by an Awite AwiFlex Cool+ gas analyzer. Within this article, we analyze the collected datasets containing more than 12 000 records and present the first practical experiences of the operations of the innovative power-to-gas bench-scale prototype.
The analysis of the collected gas composition data of the product gas already provides important data for modelling the commercial-scaled processes. The average value of VVD was about 40 l/l/d in the period under review. Further increase of the methane content can be achieved by introduction of higher mixing energy and by increasing pressure levels in the bioreactor (as demonstrated in the BioCat plant – data not shown here) – both of which are strategies envisioned for the commercial plant. In routine activities (turn on, shut down, continuous operation) we could verify the high robustness of the biocatalyst and the base connection between the registered datasets and performed test results.
-
Examination of the effect of pelleted poultry manure products on a sunflower test plant in a laboratory model experiment
83-88Views:616Sunflower (Helianthus annuus L.) is one of the most important oil plants in Hungary, with a sown area of more than 627.000 ha in 2019. Sunflower cultivation is primarily important for use in the oil industry, but its role in feed and beekeeping cannot be neglected either. Sunflower adapts well to different production areas in terms of soil demand, yet, as important fact, it must be grown on soils with poorer conditions with intensive nutrient replenishment. From the agri-environmental point of view, in addition to the use of pelleted poultry manure products, which are also new to the consumer market, is of paramount importance. Their advantages include a wide range of nutrients as well as a soil structure improving effect.
In our research, we investigated the starter effect of pelleted poultry manure products applied at different doses (200 kg ha-1 and 400 kg ha-1) on sandy soil with humus using a sunflower plant. The aim of our research to investigate the effect of using pelleted fertilizer products as starter fertilizers on sunflower plant germination, and investigate the effect of poultry manure products on soils.
Based on our results, it can be stated that the pigment content (chlorophyll and carotenoid content) was positively influenced by the higher dose treatments (400 kg ha-1), thus increasing the photosynthetically active leaf area. Compared to the control, the carotenoid content in the test plants of the treatments increased, and the differences of this treatment proved to be significant (p<0.05). Our experiments supported the beneficial effect of pelleted poultry manure-based products in the soil-plant system.
-
Penicillium chrysogenum antifungal protein (PAF) production in transgenic tobacco (Nicotiana tabacum) plant
77-82Views:267Under the „Molecular farming” research program (product vaccines and substances for medical use with gene manipulated plant) in 2007 in UD Centre for Agricultural Sciences and Engineering Faculty of Agricultural Science Institute of Horticulture Department of Plant Biotechnology experiments were launched to transform tobacco plant by PAF antifungal protein. Our aim was to learn the transformation technics. We chose the
Nicotiana tabacum and PAF as model systems.
Our work was to express several different paf constructions in plants with nuclear and plastid transformation too. After that we confirmed the presence of paf gene in the level of DNA and RNA. -
Evaluation of chickpea (Cicer arietinum L.) in response to salinity stress
105-110Views:824Soil salinity is a severe and expanding soil degradation problem that affects 80 million ha of arable lands globally. Chickpea (Cicer arietinum L.) is very sensitive to saline conditions; the most susceptible genotypes may die in just 25 mM NaCl in hydroponics. Approximately 8–10% yield loss in chickpea production is estimated due to salinity stress. However, it is still not established why chickpea is so susceptible to salt affection. Salinity (NaCl) impedes germination of seeds, though chickpea varieties considerably differ from one another in this respect. Some chickpea genotypes are more tolerant in the stage of germination, tolerating even 320 mM NaCl. The reasons of this variation are unrevealed; there is a shortage of knowledge about the germination abilities of chickpea genotypes in saline conditions. Nevertheless, the effect of salt stress on vegetative growth can be analysed in hydroponics, in pot or field conditions, regardless the experimental environment, the ranking of genotypes regarding salt resistance is coherent. Chickpea genotypes can be different in their ability to retain water, maybe under salt affection; the more salt tolerant lines can maintain higher water content in the shoots, while the more sensitive ones cannot. The identification of salt tolerant chickpea landraces based on developing genetic variability is a suitable strategy to combat against salinity problems arising in arid and semi-arid areas.
-
Evaluation of the use of leaf fertilizers and growth regulators in winter wheat: A review
77-82Views:406Winter wheat is a leading cereal on a global scale, however, yields remain variable due to increasing weather extremes. This review synthesizes evidence (1971–2024) on the effects of foliar fertilizers and plant growth regulators/biostimulants on wheat growth, yield and quality. Across studies, appropriately timed foliar micronutrient applications (Fe, Mn, Cu, Zn, B, Mo) tend to enhance chlorophyll content, photosynthetic activity, and grain quality traits, while selected copper- and zinc-based products frequently increase grain yield and crude protein. Biostimulants—such as amino acids, humic/fulvic acids and seaweed extracts—generally improve stress tolerance (drought, cold) and may raise grain number and thousand-kernel weight. Plant growth regulators (e.g., lodging control agents) can reduce plant height, strengthen stems and improve stand stability, thereby contributing to yield security. Evidence magnitude varies with soil supply, cultivar, and phenophase-specific timing. We summarize practical windows of application, expected responses, and limitations, and highlight research gaps in standardizing doses and reporting effect sizes. Overall, foliar nutrition and growth regulation are promising tools to increase yield stability and quality under increasingly variable growing conditions.
-
Application of GIS, precision agriculture and unplugging cultivation in plant breeding of Karcag
49-56Views:361In the last two decades, the prevailing ecological conditions and climate change have caused negative effects. Therefore, a paradigm shift is needed in the field growing of plants. The latest inventions, digital technologies, precision cultivation are not enough, the mentality of the farmers is more important. For this reason, not only big financial sacrifices, but adequate receptivity are needed on behalf of farmers. Adequate skills and continuous self-education are necessary. The yield of plant growing farms is determined by ecological conditions to a 40% extent, genetic background of the seed has a 30% share and the applied agricultural technology has a proportion of 30%. In different agroecological conditions, bred varieties of plants have bigger tolerance to unfavorable factors of the regions and significant yield stability. Farmers, who buy and sow seeds, can only contribute to the genetic potential of the seeds with cultivation technology. Plant breeding provides stable genetic background and good quality seeds. Breeding activity – choosing variety proposants, breeding them, selection work, classical breeding process for 8-10 years – must create new landraces, which can produce balance, high yield and have good quality parameters in extreme ecological conditions, yearly excursion and have higher tolerance to unfavorable factors of the region giving significant production stability for farmers. In Karcag GIS technology, precision cultivation elements and soil-friendly agrotechnical methods have been introduced which largely support the aims of breeding and can also provide optimal cultivation conditions in extreme years. Because of the specificity of breeding the main aim is not only to increase yield but to provide harmonic growing for bred materials, to decrease the number and the cost of cultivation and to be punctual. In this study, applied new methods and technologies are introduced.
-
Comparison of Integrated and Conventional Production of Young Nonbearing Apple Orchards
3-5Views:195The large number of pesticide applications in apple orchards creates serious problems with pesticide residues and their side effects on beneficial organisms, the environment and human health. This is the reason behind the search for new systems for apple protection.
The investigations were made in apple orchards of the Institute of Agriculture at Kyustendil, during the period from 1997-1999. Three scab resistant cultivars grafted on rootstocks MM106 were planted in 1996. The orchard was divided into four plots. Two plots were treated as „conventionally” and the other two were treated as „integrated” according to the general principles, rules and standards of integrated apple production.
The key disease during the experimental period was powdery mildew, which can be controlled only with pruning of infected clusters and shoots during the first three years after planting. The key pests in the orchard during the nonbearing period were the green apple aphid and San Jose scale. In the integrated plant protection system, it is possible to reduce the number of insecticide treatments depending on the density of the main pests. -
Anaerobe degradation of maize infected by Fusarium graminearum
57-61Views:567Last year intense rainfalls and moisture conditions were beneficial for the Fusarium sp. in Hungary. Fusarium strains decrease cereal quality (for example maize), furthermore may cause yield loss. Due to the toxin production, the fungi have a dangerous animal and human pathogen effect (Placinta et al., 1999).The effects of the Fusarium infection and its mycotoxin production haven’t been perfectly eliminated. Fusariumgraminearum
is the most common agricultural pathogen in Hungary. The utilization of infected maize as an alternative biogas raw material may be an efficient and environmentally friendly disposal method. In this case, Fusarium-, and mycotoxin-content of the maize have to be analyzed as well as the impact of these factors’ on the biogas production process. Our experience was based on the raw material basis of a biogas plant. Different amount of Fusarium free and infected maize grits have been added to the regular raw material mixture. The detection of Fusarium fungi has been analyzed
in experimental digesters throughout the different stages of mesophilic digestion. In the biogas liquid end product the Fusarium was detected by breeding and by microscope. According to our results, the Fusarium sp. was not detectable in the liquid end product after 30 days. -
Caliometric characterisation of crop production byproducts
55-58Views:254By the decreasing tendency of the fossil energy resources more emphasis put on the usage of renewable energy resources. The consideration of environmental protection and the efforts of the European Union make current the widespread usage of renewable energy within biomass energy. One of the determinative trends of biomass energy is the direct combustion of biomass. Characteristically woody stocks are produced for this aim, but there is a considerable potential in several byproducts of growing herbaceous plants or of other processes.
In our study three byproducts of plant production have been investigated which appeared at the harvest. The Higher Heating Values of wheat, maize and sunflower byproducts have been determined by an IKA C2000 Basic adiabatic calorimeter. According to the statistical analysis of the measured data the HHV of the byproducts are different, and these values are in a negative correlation with the amount of ash in % (R2=0.873) appeared by the combustion.
-
Improved soil and tomato quality by some biofertilizer products
93-105Views:451The use of microbial inoculums is a part of sustainable agricultural practices. Among various bioeffectors, the phosphorus-mobilizing bacteria are frequently used.
The objective of this study is to investigate the effect of some industrial biofertilizer inoculums, of containing P-mobilizing bacteria on the quantity and some quality parameters of tomato fruits. Spore-forming industrial Bacillus amyloliquefaciens FZB42 (Rhizovital) as single inoculums and combinations with other Bacillus strains (Biorex) were applied on Solanum lycopersicon Mill. var. Mobil test plant. Soil microbial counts, phosphorus availability, yield and fruit quality, such as total soluble solids (TSS) content and sugars (glucose, fructose) were assessed. The results found that single industrial inoculums of FZB42 product had positive effect on P-availability and fruit quality in the pots. Fruit quality parameters, TSS content, soluble sugars were significantly improved (p<0.05). Such better fruit taste was correlated significantly by the most probable number (MPN) microbial counts. Use of such bioeffector products is supported by the positive interrelation among measured soil characteristics and inside healthy quality parameters of tomato fruits.