Search

Published After
Published Before

Search Results

  • Study of the effects of silicon and sulphur foliar fertilization on yield components and yield in different winter oat cultivars
    43-49
    Views:
    83

    The aim of this work was to study the effect of sulphur and silicon foliar fertilisation treatment in different Hungarian-bred winter oat cultivars on the yield and the yield components, e.g. panicle ear-1 numbers per square meters, number of panicle nodes, number of spikelets per panicle, and thousand kernel weight (TKW) in the 2022–2023 growing season. The obtained results show that the applied fertilisers influenced the measured parameters, and we get the highest yield at the combined treatment – where silicon and sulphur was both applied –, and unexpectedly the lowest when only silicon was applied during the growing period. We measured the highest number of panicles m-2 at the sulphur treated experimental plots, and the lowest at the silicon treatment. We measured the average number of nodes of the panicle, and we can say that the sulphur fertilisation caused significantly higher values than any other treatment. Talking about the spikelet numbers, we get the highest value at the sulphur fertilisation, and the lowest at the control plots. However, our result wasn’t that prominent in the case of TKW, we get the highest weight at the silicon treatment, and the lowest at the sulphur fertilisation.

  • The effect of irrigation on the yield and quality of maize (Zea mays L.) hybrids
    143-147
    Views:
    185

    In this study, the effect of water supply on the quality and productivity of different maize hybrids was observed.

    Maize production is influenced by many agro-technical factors such as nutrient supply, plant density, environmental factors, water supply and temperature. Good soil quality and adequate technology significantly reduce the unfavourable effect of crop year. The impact of fertilization, crop rotation, irrigation and plant density on maize yield was greatly affected by crop year and crop rotation. The main constituent (69–75% dry matter concentration) of maize seed is starch, however, its increase can be achieved only to a limited extent, as increasing the starch content will reduce other parameters, especially protein content. Significant nutrient content improvements can be achieved by appropriate hybrid-site connection and the use of adequate technology. Protein content reduction with optimal water supply can be positively influenced by the appropriate nutrient supply for the hybrid.

    The experiments were carried out at the Látókép Experimental Site of Crop Production on calcareous chernozem soil. The weather of the examined year, which was partly favorable for maize and partly unfavourable in other respects, was also reflected in the development of maize and yields achieved.

    In 2019, we were examining the hybrids of Kamaria (FAO 370), P 9903 (FAO 390), DKC 4351 (FAO 370) and KWS Kamparis (FAO 350–400). Due to the dry soil condition, sowing was delayed, however, the hybrids emerged ideally because rain arrived soon after sowing, which facilitated initial development. Young plants evolved rapidly and dynamically in the case of all hybrids. In terms of heat-demanding bread, the month of May was unfavourable to temperatures below the annual average, but the higher amount rainfall helped the development. However, due to the drier period in early July, 25–25 mm of irrigation water was applied to half of the experimental areas on July 1 and 15.

    The aim of our research was to determine the best population density for hybrids under favourable soil conditions (calcareous chernozem soil). In both irrigated and dry conditions, a crop density of 75,000 crops were the most favourable for the Kamaria hybrid. The P9903 hybrid in the case of a crop density of 85 crops proved to be ideal and the DKC4351 had an optimal population density of 95,000.

    However, it should be taken into consideration that, in the case of soils with poor water management, the drought sensitivity of the crop stand may increase at a population density of 95,000.

    As a result of irrigation, yield increased and the difference between the examined plant numbers decreased. The yield growth was relatively moderate (341 kg ha-1 – 1053 kg ha-1), which makes the economicalness of irrigation doubtful in the given year.

  • Inhibition of the spread of Sclerotinia sclerotiorum in aquaponics
    5-8
    Views:
    277

    Sclerotinia sclerotiorum, which causes white mold, is a widespread pathogen. In 2020, a new host plant of this fungus, the watercress (Nasturtium officinale) was identified in Hungary in an aquaponic system. During the cultivation of watercress S. sclerotiorum was detected on the plant, the fungus caused a 30% yield loss. Fungicides should not be used against fungi in aquaponic systems. Non-chemical methods of integrated pest management should be used. These include biological control (resistant species, predators, pathogens, antagonist microorganisms), manipulation of physical barriers, traps, and the physical environment. In the aquaponic system, the removal of the growing medium (expanded clay aggregate pellets) solved the damage of Sclerotinia sclerotiorum 100%. By removing the expanded clay aggregate pellets, the environmental conditions became unfavorable for the development and further spread of the S. sclerotium fungus.

  • Biostimulant induce growth, chlorophyll content and fresh herbage yield of alfalfa (Medicago sativa L.) and variegated alfalfa (Medicago × varia Martyn) plant
    19-25
    Views:
    90

    The use of biostimulants is associated with promoting plant growth by stimulating cell division and improving nutrient availability and uptake. A study was conducted at the University of Debrecen, Hungary, to examine the effect of biostimulants on alfalfa growth, chlorophyll content and fresh herbage yield. The experiment was arranged in a randomised complete block design with three biostimulant treatments plus control replicated three times. Data collected were subjected to analyses of variance using Genstat, where significantly different means were separated at a probability of 5% using the least significant difference. The findings show no different variation in plant height or chlorophyll content (SPAD) throughout the early stages of growth. Nonetheless, a notable impact was noted in the latter stages (28 days after biostimulant treatment application) on the growth of the alfalfa plant. Biostimulant treatments did not had effect on fresh yield for second through fourth cuts, but the fifth cut showed a significant effect, with T1 treatment recording the highest herbage yield of 19745 kg ha-1 followed by T2 (Tricho Immun plus Ino Green) and T3 (Tricho Immun), with yields of 19528 kg ha-1 and 17273 kg ha-1, respectively, while the T0 (control) recorded the lowest herbage yield of 12060 kg ha-1. However, the average mean yield indicated the application of biostimulants significantly increased fresh yield herbage by 20.5%. Correlation coefficient values suggested plant height at both 14 and 28 DAH (days after harvest) strongly correlated with fresh herbage yield (r = 0.7756 and 0.7455) which reflected in the increase in fresh herbage yield. Therefore, our results suggest that the use of biostimulants in alfalfa cultivation holds promise for improving growth and yield potential through their positive effects on chlorophyll content and the growth of alfalfa plant.

  • Studies on yield stability in autumn wheat species
    61-66
    Views:
    93

    The environmental adaptability of crop production is basically determined by the selection of biological background (plant species and varieties) suitable for the region and the site. The sowing structure adapted to the ecological background increases the yield and decreases the yield fluctuation caused natural effects. Exact long-term trials are essential to develop variety structure of winter wheat production suitable for the given ecological conditions. We have examined the productivity and yield stability of genetically different state registered winter wheat varieties. We have compared the varieties’ yield results in plot trials, at similar agrotechnical conditions, in different cropyears. We have examined the absolute and relative (compared to the mean of varieties) yield of winter wheat varieties. We have valued the yield stability of genotypes with the help of analysis of variance and linear regression equations. We have defined the connection between productivity and yield stability of varieties. We have pointed out the varieties with good productivity and yield stability in given agroecological conditions.
    According to the results of our examinations the developing of variety structure suitable for the agroecological conditions could increase the potential and effective yield level of wheat production.

  • Analysis of the photosynthetic parameters, the yield and the quality of winter wheat
    101-106
    Views:
    180

    The environmental adaptability of crop production is basically determined by the selection of biological background (plant species and
    varieties) suitable for the region and the site. The aim of our work is to parametrize the plant assimilation, its intensity, dynamics and the
    most important characteristics and the relationships to the quality in winter wheat trials. The measurements were carried out at the research
    site of the University of Debrecen in small parcel experiments. We measured the leaf net CO2 assimilation rate, stomatal conductance,
    intercellular CO2 level, the transpiration, the leaf temperature and the air temperature by the LICOR LI-6400 portable photosynthesis
    system in field trials on the nutrient supply. The soil of the experimental area is calciferous chernozem with favorable water regime.
    We have examined the photosynthetic activity, the productivity and yield stability of winter wheat varieties. We have compared the yield
    results, at similar agrotechnical conditions in seven cropyears. We also determined the quality parameters of the winter wheat varieties.
    Then we valued the yield stability of genotypes with the help of analysis of variance and linear regression equations. We have defined the
    connections between assimilation parameters, the yield stability and quality parameters of wheat varieties.

  • Leaf reflectance characteristics and yield of spring oat varieties as influenced by varietal divergences and nutritional supply
    29-34
    Views:
    110

    Inadequacy of nutrients in the soil and sufficient inaccessibility to nutrients is caused by factors that affect production and productivity of spring oat varieties. Exogenous application of nutrient and real time nutrient assessment can therefore reverse these associated negative consequences. A field experiment was conducted to evaluate the response of spring oat varieties to sulphur and silicon based fertilisation. Eight spring oat varieties, four level of nutrient application was arranged in a split-plot design with three replications. The obtained results showed that foliar application of sulphur improves the grain yield of most nutrients responsive varieties by about 34.7%. However, application of silicon had shown a diminishing return association to grain yield of variety GK Kormorán, GK Pillangó, Lota, Panni. LAI, thousands grain weight, SPAD, NDVI was significantly (p < 0.05) influenced by genetic difference of the tested varieties, developmental plasticity, and nutrient application. Significantly higher grain yield was obtained from the variety Mv Pehely than the other tested varieties. Therefore, it could be inferred that a combined use of nutrient responsive spring oat varieties and sulphur containing fertilisers could be important agronomic practice to improve grain yield and to develop climate resilient oat varieties.