Search
Search Results
-
Model Calculations on the Use of Mobile and Stationary Units for Wood Pellet Production
1-8Views:333This paper presents the model calculations made for supporting the decision making of different technology alternatives. Base cases were A) use of a mobile pelletizer and B) using pellet factories at fixed locations for the production of a new product, sheep wool pellets. Calculations were made for three alternatives for each base case. The results of the model were used to examine the energy, time and cost criteria of the alternatives. Based on the given preliminaries, results of the model calculations supported the recommendation to choose case B) for further technology management and supply chain management decisions.
-
Food Industry 4.0 Readiness in Hungary
1-12Views:306In terms of production value, the food industry is the third-largest in Hungary, the first in Hungary in terms of the number of employees, and the first in Europe in the processing industry, as well as a significant user of resources. The research examined the state of art of digitalization readiness, focusing on I4.0 technologies, which supports the management to operate more efficiently the enterprise and to make better decisions. So the focus was on integrated enterprise information systems, management support systems, business intelligence systems, industry 4.0 technologies, and issues related to their application. The analysis based on an online questionnaire survey the request sent to 4.600 enterprises, the response rate was 5% which was representative of the branches of production, covered the Hungarian food and beverage manufacturing sectors in 2019. The companies were asked the most critical technologies in development, going towards Industry 4.0. The research tools were LimeSurvey, Mailing List Server, Excel, Power BI (Desktop, Publishing Server to distribute the results). The used analysing methods were making calculations, pivot tables, models, dasboards. We found that a significant portion of businesses, 78 %, use mobile devices in the manufacturing process. The three most relevant digital technologies are geolocating (GPS, GNSS), cloud computing, and sensor technology. The current level of digitalization and integration cannot be said to be high, but respondents are very optimistic about expectations. Improvements are expected in all areas in the next 2-3 years in terms of digitalisation and integration. Vertical integration involves, first and foremost, cooperation with partners in the supply chain. Horizontal integration means close, real-time connectivity and collaboration within the company. Unfortunately, between 6% and 15% of SMEs (approximately 9% on average) and large enterprises, 36% have a digital strategy. According to the survey, the sector needs significant improvement and creating a digitalization strategy.
-
The Use of Additive Manufacturing for Wind Tunnel Simulations
62-71Views:154The current economical situation requires aircraft operators to start organizing their activity in the direction of carbon neutrality using innovative solutions.
The goal of present study is to desing a brand new wingtip device using 3D printing which helps reducing aerodynamical drag, leading to fuel efficiency and less carbon emission with its innovative shape.
-
Evaluating the Efficiency of Polyhedral Mesh Elements in Solving the Problem of the Flow around Ship’s Rudder
241-256Views:243Meshing is one of the crucial key features to the success of CFD based simulations, this study is evaluating the efficiency of polyhedral elements in solving the problem of the flow around ship rudder, using a Reynolds-averaged Navier-Stokes turbulence model (SST k-ω), and compares it to a tetrahedral based mesh, considering that polyhedral elements were neglected in the past due to difficulties in implementing them, this was solved by introducing a tool by ANSYS that converges tetrahedral elements to polyhedral element, and integrating it into FLUENT software, the model was validated by comparing it with previously validated model which used the full version of ANSYS, this study was concluded using the academic version, but still it was able to produce satisfying results in predicting the lift and the drag coefficient, the pressure around the rudder surface, the velocity and the turbulent kinetic energy, finally the mesh quality was evaluated using the orthogonal quality criteria, the results showed the supremacy of the polyhedral elements in saving time and computational resources and improving mesh quality, and keeping high level of accuracy in predicting the results.
-
Digitalization Process by Agricultural Companies, or the Results of a Questionnaire Survey
625-636Views:261The term “information society” first appeared in Japanese social science in the early 1960s (Z. Karvalics, 2007). The interpretation of the concept has undergone significant changes over the past decades, showing that dynamically developing societies, which are undergoing constant changes due to the rapid development of information, information management and the dynamism of the digital world. The close relationship and connection between information and information technology has become a fundamental factor in the societies of today, the organizations life, which generates inevitable, sometimes serious debates and profound changes. Economic operators must necessarily be resilient to technological change. We should think of the time of the Industrial Revolution, when modern weaving machines flooded the factories. Otherwise, a resilient organization will not survive in an evolving and ever-changing dynamic economic environment. Of course, this is true of agriculture as well, just as it is for other sectors of the national economy. On the one hand, my assumption on the basis of which my questionnaire was compiled was that enterprise management systems are increasingly used by enterprises in agriculture due to the diversification of activities. At the same time, I assumed that the size of a business could influence the use of information technology (hereinafter IT), so I hoped that my research would provide reliable data on this as well.
-
What Drives The Diffusion of AI Recruitment Systems in Swiss HRM? The Importance of Technological Expertise, Innovative Climate, Competitive Pressure, Employees’ Expectations and Contextual Factors
1-43.Views:30This study examines organizational, environmental, and contextual factors influencing the diffusion of artificial intelligence recruitment systems in human resources management within Swiss organizations. Based on a survey provided to 324 private and public Swiss HR professionals, it explores how some technology-organization-environment theoretical framework predictors' as well as innovative climate provided by organizations influence the three stages – evaluation, adoption, and routinization – of diffusion of this innovation. To do this, the following article is based on a PLS-SEM structural equation model. Its main findings are that technological expertise, innovative climate, competitive pressure, and expectations regarding future use of the tool by organizations working in the same field are directly linked to the spread of this type of AI tool. However, public-sector organizations are more reluctant about using this type of tool. This aversion can, however, be moderated by an innovative climate and the fact that the HR function plays an active part in an organization's strategic direction. This said, this article makes a significant contribution to the literature about the diffusion of emerging technologies in organizations.
-
Development of a Small-Scale Plastic Recycling Technology and a Special Filament Product for 3D Printing
365-371Views:410In our days, the fight against pollution has become a real challenge for the state. recycling is one of the solutions that is adopted in several nations to reduce the rate of plastic discarded in nature. The amount of plastic waste has been increasing for decades contributing to the environmental pollution that is one of the most serious problem of the mankind. according to the statistics not only the household plastic waste, but the industry discharge is increasing because the utilization of plastic as a raw material is more and more extending. plastic can be found in a lot of products, huge number of bottles, plastic bags, computers, auto parts are sold every day. The current applications for using recycled plastics in fabrication and design are fairly limited, on a small scale, plastics (such as abs, HDPe1, or Pe2t) are shredded and formed into pellets, and then either extruded into lament to be used in existing 3d printers, or injection molded into small parts and pieces of larger components. at a large scale, recycled HDpE is melted into sheets and either used directly as sheets in construction, or then heat formed from a sheet into components for construction. these methods of fabrication using recycled plastics are the norm because of their straightforward processes. nevertheless, each method leaves some complexity to be desired. This paper we study the types of plastics and diagnose the pollution caused by the latter. this allowed us to design and size a recycling station of plastic into filaments for three-dimensional printers. this station which will contribute to the fight against pollution. the station consists of two machines for grinding of the plastic and the other for the extrusion of the desired filaments. we were able to make a theoretical academic study on both machines and also we designed with solidworks 2015. The theoretical study is spread of the mechanical calculations necessary to the design and validation of the structure using the tools. as the prospect of this project, we want to complete the achievement of this station while completing the crusher and extruder mechanically. then switch to electric and electronic parts (introduction of engines, sensors and wiring...). In the case of waste plastics that are recyclable and reusable. the most widely used are polyethylene terephthalate (pet, used for synthetic fibers and water bottles), and second high-density polyethylene (hdpe, used for jugs, bottle caps, water pipes).
-
Efficiency Analysis of Production Management System
401-415Views:218Due to the continuously evolving technology, even more escalating market competition has emerged between the companies. This competition is not only about the logistics related processes, it also appears to be significant for the production since the manufacturing companies form the center of global sale streams and without them the items found in logistical processes cannot be created. The role of production’s optimization and efficiency in the supply chain continuously grows since this is the part where a company’s most cost is produced. Our research objective was the examination of a company that applies various manufacturing, assembly technologies, and the used tools and softwares for this purpose were the SAP Business One ERP system and it’s add-on, called PPS One, the latter originated in Switzerland. We used these softwares to provide solutions to companies, especially to those that are dealing with manufacturing and production, for the optimization of their workflows, operations, supervising and controlling of their material. We also monitored from production technology’s elements the capacity planning, production orders, schedules, production tracking and cost accounting. We have made proposals during the analysis that might improve the company's strategy, competitiveness and increase it’s efficiency in business, and at the same time they can facilitate the company's pricing and inventory management activities.
-
The green methanol - playing a role in sustainable energy management
249-258Views:162Global energy demand is constantly increasing, so the energy sources we use, and the efficiency of energy use are of paramount importance for the future of humanity. Methanol can play a key role in the sustainable use of natural resources, in the efficient and smooth transition from a fossil oil-based energy system as well as in reducing greenhouse gas emissions. Long-term thinking will result in an increase in the use of renewable energy sources, which will favour the spread of green methanol technology and thus the use of a carbon-neutral fuel. The raw materials for the production of green methanol may include municipal solid waste, agricultural waste, renewable hydrogen and carbon dioxide and the methanol has many uses, both as fuel and chemical feedstock. It also provides an opportunity to chemically store excess renewable energy from intermittent sources, thereby reducing dependence on fossil fuels. The price of electricity used for electrolysis is the main determinant of the economical production of green methanol, so the reduction of the cost of solar and wind energy greatly contributes to the competitiveness of carbon-based production.
-
Solutions of Warehouse Technology in Connection with Management Decisions
1-10Views:158The aim of the study is to analyse the effect of management decisions on space utilization of warehouses through two companies’ example. The only way to make good decisions is to take into consideration the possible effects of changes. One of the tire manufacturing companies managed to improve space utilization, caused not only time but cost reduction. On the contrary, a bad decision of a household chemical factory induced enormous problems in the material flow.
-
Requirements for Multicultural Competencies Defined by a Focus Group
44-56Views:217Globalization, the spread of multinational companies and the enormous development of information technology can lead to a new trend in employers’ requirements. However, being employed by an international company is a real possibility for any employee in any part of the world. Even if they do not have to work abroad, employees may have to function in a multinational environment in their home countries. A favourable combination of intercultural competencies is a key factor in the selection and development of employees. A possible way of measuring these competencies can be the Multicultural Personality Questionnaire (MPQ). First of all,on the employers’ part, it is important to clarify the exact requirements and competencies (dimensions) to be able to draw up an ‘ideal profile’. We prepared two versions of the MPQ (91-item; 5-dimensional) and used them to test employers’ requirements in the selection process regarding the dimensions of cultural empathy, open-mindedness, social initiative, emotional stability and flexibility. This study describes the results of a focus group interview, which took place in 2017, revealing the importance of multicultural competencies from the employers’ point of view and examining the conditions of the adaptability of the two questionnaires. We used the focus group method to find out in what conditions the questionnaires canbe used in a selection process. What possibilities and limits are therefor using the direct five-dimensional questionnaire? What aspects do we need to take into consideration in expressing and interpreting the requirements in the results of the test?
-
Challenges of the Quality- and Change Management in the Context of Upcoming Social-Industrial Changes (5.0) – Conclusion of a Survey
138-150Views:212The upcoming industrial-social revolution, which may be called the 5.0, is emphasizing the coordination of the value-creating work of technology (machine) and man. This approach wishes to move towards sustainability, which deserves a significant role in nowadays through the world empathizing the negative effects of the wolrd. During my research I was looking for the answer that how the extended industry 4.0 and its tone be in Hungary via supply chain of the automotive industry. During my research I was looking for the answer that how the extended industry 4.0 be in Hungary and its tune through supply chain of the automotive industry. I also have examined that which changes are justified regarding management systems in interest of efficiency and emphasizing the human capital by leaders interviewed. As a part of qualitative research in-depth expert interviews were interpreted with help of content analysis based on the methodology of grounded theory. The results demonstrate the need to review and change existing processes in order to ensure that the potential of human capital is not lost and that technological development, even more so, is at the service of human resources in order to achieve its efficiency and effectiveness. Among the possible tools we can find the re-structurizing changes of post tracking processes of the audits in management systems providing quality. Furthermore, the practical implementation of multifactorial statistical process control in the evaluation of processed data, which may be one of the essences of industrial (IoT) data.
-
Application of Additive Technology in Precision Casting
43-56Views:197In this paper the surface of the prepared test specimens had been examined with light microscopy and surface roughness measurements. In order to improve the surface smoothness of PLA specimens, application of ethyl acetate was required. After this surface treatment, microscopic images were taken again. The melting and decomposition temperatures of the materials had been determined using derivatography. The chosen method was precision casting with gypsum molding. Also, the plaster molds had been burnt out according to the predefined melting and firing diagram. The measurement series shows that the samples produced by 3D printing can also be used in the field of precision casting. They provide greater freedom of design, more sophisticated pieces, and prototypes can be finished in a shorter amount of time.
-
The Possibilities of Additive Manufacturing in Medical Use
246-253Views:118Additive Manufacturing has been invented in 1981 at the University of Texas, and to this day it has grown to be the most versatile and promising manufacturing technology in the market, both the industry and health care system has noticed this. Additive Bio-Manufacturing (ABM) techniques, which can be used in health care, are highly in demand, and researches have been going on to make these technologies safer and even more versatile. For more utilization and versatility, special attention is required to develop new materials which can help in increasing the service life, bioactivity, cell growth along with the desired mechanical properties, and to find the right manufacturing parameters for creating optimal products. The aim of this review is to present the available main Additive Manufacturing technologies, and particularly the biomedical usability of Additive Manufacturing.
-
Building’s Constructions and Structures. Part I. The Classification of Buildings by Supporting Structures
56-78Views:350In the paper we deal with the structures interpreted among the buildings constructions. In the present, first part we classify the buildings constructions by their functions. Two main groups can be formed. Analysing supporting construction group can be shown that the building can be well classify by supporting constructions. The classification based on vertical supporting constructions like wall and column gives fourelement classification: wall frame, column frame, mixed frame and frame without vertical supporting constructions. This classification is very simple. Take into consideration of the buildings technology of walls and columns there can be given a classification whit more elements. Different subgroups can be interpreted using connections of walls and columns with floor construction in the certain groups.
-
Security and Risk management of Intelligent Integrated Institutes
74-84Views:100The intelligent households are getting more and more popular beside the intelligent technologies. With all the advantages that this can provide, it brings the security risk of the information technology as well. We must deal with those dangers. We have to determine the risks so that we can make proper precautions. This article gives an effective guideline to achieve safety.
-
Engineering Spatial Ability and Spatial Geometry – Research Experiences 1.
383-387Views:116Spatial visualization skills have an important role in teaching and learning of engineering studies. Many studies have shown that there are correlations between various measures of spatial skills and performance in particular Science, Technology, Engineering and Mathematics (STEM). Many engineering students have problems with imagining a spatial figure and therefore to solve the spatial geometry exercises, so development of spatial ability is very important. We have developed special tools and worksheets for development of spatial abilities
-
Parametric Programming Applied to the Optimal Production Structure in Determining
375-389Views:138The agricultural planning often the question arises, how the different input (fertilizer, feed, irrigation, etc) from what to use on a production (land, animals) unit basis, and to what intensity. The input transformational efficiency experiments by setting analysis and evaluation. For example examined the nutrient replenishers fertilization experiments, the effect of nutritional values of the feed on the body weight gain, milk production in animal experiments. The input input efficiency to the external environment (weather, soil conditions, unexpected events), the technology used and the biological factors both influence. The farmer must be chosen in each sector, taking into account the magnitude of these inputs and environmental requirements. The economic optimum is usually trying to approach the sectoral level, which serves as the basis for future planning data. The mathematical programming models using relatively simply and quickly determine the optimal production structure. The models provide the specific resource requirements for, and the limitations of the objective function coefficients are calculated on the basis of sectoral. This becomes a deterministic model, and we can get the appropriate sectoral analyzes outstanding results of production structures. Therefore the relationships within sectors directly incorporate mathematical programming model and corporate interests placed above the interests of the industry to determine the intensity of the sectoral inputs. in their article a fertiliser application example, we present the production structure and the plant production sector fertiliser input of a time optimization, in which the fertilizer for specified sectoral relationships appear in the model objective function.
-
Dependence of the Passive Force Fp From the Revolutions, back Engagement of Cutting Edge Ae, Working Engagement of the Cutting Edge Ap During Milling
72-79Views:188In this contribution is analysed the force component of final force (passive force) by peripheral milling operation. Therefore, the main parameters that had influence to independent variable were revolutions, back engagement of a cutting edge ae, working engagement of the cutting edge ap. The article deals with the issue of milling in material AlMgSi0.5 (aluminium alloy). Specifically evaluates the force component with respect to change of revolutions (4000/min., 5000/min., 6000/min.), working engagement of the cutting edge ap (1 mm, 2 mm, 3 mm) and back engagement of a cutting edge ae (5 mm, 10 mm, 15 mm). The Alfaflex process fluid with 7% concentration was supplied in an amount of about cca 10 l/min.
-
Possibilities of the Reclamation of Wastewater in Small Abattoirs Combined with Rainwater Harvesting
115-125Views:70The purpose of the study is to review the extent to which waste water from small mobile slaughterhouses can be reclaimed along with the basic cases and the purpose for which this can be realized. Keeping the criteria of sustainability in mind, I identify the possible and at the same time reasonable combinations of technology, highlighting and presenting in more detail those that include the utilization of waste water and the utilization of rainwater. I will describe the limiting factors - site features, environmental protection and health regulations - which are decisive in which alternative can be chosen during a specific installation.
-
Home 4.0 – Intelligent Houses
53-57Views:221To understand “Home 4.0” you must know about the industrial revolutions, specially about the fourth one, which is often called “Industry 4.0”. The automatization process and the mapping of mechanisms and resources in the cyber-physical space are getting more and more popular in the households. From there comes the term in the title. Analysation of the currently used smart home technology was made and a model that simulates real life events with smart home criteria was created. The model is controlled by a central control unit, the front panel and program of which is also created. Important features such as lighting, heating, cooling and security system, fire protection, controlled consumer electronics, sprinklers and motors came true.
-
Modern Applications of Aluminium Foams
14-21Views:339The implementation of aluminium alloy foam has more and more attention. Application of closed cell aluminium foam has made an impact in automobile and aerospace applications where crash energy absorption, vibration and weight reduction are obligatory [1,2,3]. The aluminium alloy foam is an advanced lightweight material providing high strength and stiffness at relatively low density. The technological use of aluminium alloy foam is difficult with the currently available technologies. In the case of open cell aluminium foams, the most common research areas for application are heat exchanger components, filters and sound damping elements [3]. The manuscript focuses on the manufacturing techniques of the aluminium alloy foams according to the application areas. First step is the investigation of the requirements for the application: what are the loads and the circumstances and why can we use aluminium foams. Second step is the knowledge of the producing methods of the foam or the component. And the last step is the investigation of the possible testing methods.
-
Analysis of the Policy Background of Transport Related Use of Renewable Energy
124-129Views:111The EU energy policy prioritizes the following principles: sustainability, competitiveness and security of supply and addresses the reduction of greenhouse gas emissions as a priority. The related EU policy (including the White Paper on Transport) outlines these principles, identifies goals and opportunities for action. At company level methodological guidelines and standard procedures can be used to assess the carbon footprint of the organization, to generate efficiency goals and to prepare action plans. In the Hungarian policy framework, a comprehensive National Sustainable Development Framework Strategy defines the basic principles for the analysis of the sectorspecific or regional strategies. Sustainable Energy Action and Climate Plans (SECAPs) integrate energy and climate issues and include interventions and improvements for the better use of renewable energy sources in transport at municipal level. As a summary it can be stated that exploration of the policy background would needed to influence the use of renewable energy sources for transport and definition of the development goals can help economic organizations to transform their mobility patterns and reduce related carbon footprint.
-
Designing Aspects and Classification of Bearing Industry Box Handling Apparatus
325-334Views:119It has been an accepted tendency in the industrial practice since the last third of the 20th Century to decrease the living labour demand of the manufacturing processes. One of the main tools of it is the automation of production. In the design, the construction and the programming of the developed automata, the results of electronics, informatics and mechatronics can be used. All of the scientific fields mentioned above undergo intensive development. By the application of the results achieved in the design of the applications, the monotonous, dangerous and tiresome work not requiring expertise can be assigned to machines. In the longer run, the application of the automata is beneficial also in financial aspect, since the costs of living labour are continuously growing, while that of the mechatronic and technological devices show a rather decreasing tendency. Reliability is also an important aspect. It is well known for everyone that a well-designed and programmed automatic device performs its task without mistakes. If there is any objection or breakdown, on the basis of the currently valid safety technology rules, the machine stops, does not trigger any damage and after its repair, work can be continued.
-
Adapting Open Innovation Model in Supplier Qualification Programs
155-167Views:348The development of innovative models fundamentally contribute to the changing the way of thinking in business context. Today, in this process, the impact of open innovation model is a kind of paradigm shift. The contents of this change has been mostly clear in the field of context of product-, innovation and technology, but not onm the field of organizational and management innovations. In this study, we sought to answer that in the case of knowledge transfer’s special field –the programs of suppliers - how to apply the principles of open innovation and how this may have positive effects. The motivation behind, was to look for commonly used models for the SME sector, that is fundamentally linked to large enterprises as suppliers, characterized by increasingly rapid technological development ecosystem to collaborate.
