Search
Search Results
-
Optimization of inductively coupled plasma mass spectrometer parameter’s to measuring arsenic and selenium
59-64Views:160In the last decades an increased interest has been evolved about arsenic and selenium. The aim is to understand the environmental, agricultural and biological role of the these elements. In case of arsenic the mayor reasons are the relatively high concentration of arsenic in marine biota (mg kg-1) and the arsenic contaminated drinking waterbases of some Asian countries besides Hungary. The toxicity of higher level selenium content is also known, nevertheless selenium is essential for some biological functions. Considering its esssentiality, in our country the insufficient selenium intake rate couse lack of selenium. Measuring the concentrations of these elements are cruital but not satisfactory information, but the speciation, that is the form of an element presented in a sample is also required.
In both cases the most suitable method to determine concentration is the inductively coupled plasma mass spectrimetry. My objective was to optimase the changeable parameters of the ICP-MS for reaching the lowest (the best) detection limit. For this porpuse I have investigated the effect of parameter change on nett signal intensity and relative signal intensity. With the optimased parameter settings the limit of detection for arsenic and selenium were determined, which are 0,032 ng cm-3 for arsenic, and 0,097 ng cm-3 for
selenium. -
Physiological plasticity of main tree species of lowland hornbeamoak forest as a results of forest gap regeneration
99-103Views:161Specific leaf area (SLA) of English oak (Quercus robur L.) and hornbeam (Carpinus betulus L.) as members of Querco robori-Carpinetum were investigated in two different habitat in terms of gap forest management: in the gap and in the inert forest. The artificial opening process of the forest resulted in more light for growing saplings and need for acclimatization. Photosynthesis is one of the most important ways for plant life and plant production basically influenced by altered light condition resulted in opening process. Efficient photosynthesis is important for plant life, plant production, but species-dependent plasticity of photosynthesis makes one species more tolerant, than others. The specific leaf area is acceptable parameters for characterising plant production, dry matter content and leaf structure. The dry matter content based on known leaf area is higher in oak both sun and shade leaves, than hornbeam. The different place of leaves in the canopy of trees did not influence the values of SLA.
-
Seedling morphology of different wheat genotypes at early stages under hydrocultural conditions
249-254Views:196Consuming “sprouted seeds” is one of the most important factors of a healthy diet. An experiment was conducted in the University of Debrecen, Research Centre of Nyíregyháza (Hungary) in 2014 to analyse some morphological traits of four winter wheat genotypes (Triticum aestivum L.) and one spelt (T. spelta) variety. Our results showed that the spelt wheat variety “Franckenkorn” could maintain higher root length throughout the experimental period. On average, both “Perbetei” and “Franckenkorn” varieties could maintain higher root number compared to the other varieties. The extensive breeding line “1401 HK” had the highest shoot length throughout the whole experiment, being significantly higher than the landrace variety “Perbetei” and both of the varieties “KG Bendegúz” and “KG Kunhalom”. It could be concluded that “KG Bendegúz” cultivar and “Perbetei” landrace seem to be the most suitable for aquaculture techniques. In addition, “1401 HK” breeding line can be the most suitable for the production of juice since the minimal required shoot length (12 cm) was achieved within the shortest period of time after sowing (9 days). This breeding line and “Franckenkorn” can also be suitable for production of “wheatgrass”, because it is consumed without roots. Further research is needed to evaluate nutritional values of these genotypes.
-
Önitatók konstrukciós és hidromechanikai vizsgálata
52-57Views:99Our research aimed to examine Hungarian automatic drinking system constructions and hydromechanics under laboratory conditions and in operation with special emphasison the small volume, valve types.
Considering that no Hungarian standard of automatic drinking system examination and qualification exists, on the basis of technical literature, the new examination method of automatic drinking systems has been elaborated.
For laboratory measurements, a universal measuring bench was assembled which is applicable to the hydromechanic testing of all automatic drinking systems (cattle, sheep, pig).
Summary of the laboratory measurements:
Upon comparison of the flow capacity of the valves, in the case of same opening values (h/dn), the rubber spring valve of SZI type automatic fountain has the highest flow capacity, although in the case of 100 kPa pressure even this type has only 15-16 l/min value which hardly surpasses the lower limit of the desired 15-25 l/min range.
The loss coefficients of the valves, on investigating in the range 100-200 kPa, showed the lowest value (2,2-5,8) with the steel spring self drinking device.
Summary of the operational investigations:
In the long term operational investigations, the rubber stripped valve and the rubber spring automatic fountains had the most favourable operational reliability values: K4=0,98 and K4=0,94, respectively.
From the aspect of animal operation of the valves, all the Hungarian types are frontal operated, thus such system automatic valve drinking devices can be used only in long and moderately long stands, directed toward the animal.
On the basis of hydromechanical and construction examinations of the Hungarian tied cattle production technology the construction modification of the rubber spring valve of SZI type automatic drinking fountain, which is the most frequantly used in this country, was carried out. Due to design modifications the valve parameters improved significantly.
The goals of the accomplished valve modification were
ζ'sz – loss coefficient to be reduced
q – flow capacity to be increased -
Analyzing the Efficiency of Dairy Farms by Using the Method of Data Envelopment Analysis (DEA)
17-21Views:89In Hungary the dairy sector is in a long-term critical period, the stock has been in constant decline. The consumption of milk and dairy products in Hungary is slightly rising compared to the world tendency, and it is fallen behind the level in 1990. The milk consumption per capita in 2006 was with 75 liters less than the EU-15 average. Dairy enterprise is a very risky activity: the profitability of the enterprise is affected by the fluctuation of feed and animal health products prices from the side of inputs, and by the fluctuation of end-product prices. Under these circumstances it is vital for the
cattle breeders, in order to survive, to harness the reserves in the breeding as effectively as possible. In our research we made a multi-faceted efficiency analysis of an agricultural holding’s three dairy farms. The chosen method for the analysis was Data Envelopment Analysis (DEA). The
selection of the method is justified by the fact that there is not such a reliable database by which we could define production functions, and that DEA makes possible to manage several inputs and outputs, i.e. multiple decision problems, simultaneously. By using DEA the sources that causes shortfalls can be identified, analyzed and quantified on farms that does not operate efficiently, thus it can help the corporate decision support successfully. In the model inputs are the cost data per one liter milk – feed, medicinal product use, logistic costs -, and the main parameters
concerning the keeping and rearing. Outputs are indicators concerning milk production, milk quality and others. We prepared the model in MS Excel, the linear programming model series were programmed by Visual Basic. After solving the model, in light of the shadow prices we can determine why either of the farms is not efficient. -
Variability examination of photosynthetic pigment content and specific leaf area in individual maize (Zea mays L.) plants
153-157Views:204Currently, maize is one of the most important crops (Zea mays L.) both globally and in Hungary. We compared physiological parameters of a maize genotype – p9903 – at two different experimental sites in a field experiment. Furthermore, we examined these parameters’ variability in individual plants on the leaves with different ages. Absolute chlorophyll content of the leaves were analysed, separately that of chlorophyll a and chlorophyll b. We also measured the absolute carotenoid contents of leaves. Furthermore, we calculated these photosynthetic pigments’ content ratio. Specific leaf area (SLA) and dry matter weight were also measured in order to characterise plant production. The results obviously reflect the decreasing in the efficiency of photosynthetic apparatus on the low yield site. Otherwise, we identify significant differences only in certain cases of leaves.
-
Volume of Paulownia Shan Tong (Paulownia fortunei × Paulownia tomentosa) plantation in Eastern Hungary: a case study
43-46Views:123Volume tables for tree plantations are not unknown in international practice. In many places, this is due to the uniqueness of the species or variety composition of the plantations and the cultivation technology used. In most cases, this is also justified by specific soil (ecological) conditions. In Hungary, publications on Paulownia have not yet included a volume table. This is the first one we are publishing, thus it can be considered as a gap-filler. The research was conducted in Monostorpályi, a 1.8 hectare, 8-year-old municipal plantation. 8 trees were selected randomly and their parameters were studied.
-
Flesh firmness examination of scab-resistant apple varieties in a storage experiment
93-98Views:119Of the different physical characteristics of fruits, one of the most essential qualities is flesh firmness, as is an important parameter when selling fresh apples, processing the fruit (processing industry) and during its storage. In the scope of our research, we examined five apple varieties originating from the Derecske horticultural site of KITE cPlc. in 2016. The plantation was planted to be suitable for intensive apple production. Samples were collected at the time of maturity (August-October) of the given variety. The five examined apple varieties (Gaia, Isaaq, Modí, Smeralda and Fujion) are all resistant to apple scab (fungal disease caused by Venturia inaequalis). The two-month storage experiment was conducted at 16-17 °C, which had an aggressive effect on our stored apples. Flesh firmness, weight and diameter were measured on three dates for each of the five apple varieties. Our results were evaluated using IBM SPSS Statistics 20 software. We aimed to compare flesh firmness, weight and diameter of the five apple varieties and their changes during storage. Isaaq (86.34 N/cm2), Modí (94.06 N/cm2) and Fujion (84.90 N/cm2) had outstanding initial flesh firmness results. The Modí apple variety provided the best storage parameters.
-
The effect of hybrid, nutrient-supply and irrigation on the grain moisture content at harvest and the starch-content of maize (Zea mays L.)
89-95Views:102Maize is a worldwide dominant plant. According to nowadays plant production principles it is important to investigate and optimize the site-specific nutrient-supply and other production factors, such as hybrid and irrigation, in the case of this plant as well.
At the Research Institute of the University of Debrecen, Center of Agricultural Sciences and Engineering, at Látókép the effect of nutrient-supply and irrigation on the quantity and quality parameters of different hybrids were investigated in a small plot long-term field experiment. In this paper we introduce the results regarding the corn moisture-content and the starch content of the yield.
We have chosen three maize hybrids – that have been bread in Martonvásár – for our investigations. The effect of macronutrients is investigated in this experiment on five levels. The half of the experimental area can be irrigated during the vegetation period – whenever it is needed – by linear irrigation equipment, but on the other half only the water amount originating from the precipitation can be used by plants.
In the year 2008 the hybrid affected the grain moisture content at P=0.1% level, while nutrient-supply had an effect at P=10% significance level. We haven’t revealed either any effect of irrigation or of interrelationship between production factors. It can be stated that there are differences between the hybrids on each nutrient-supply and on both irrigation levels. The grain moisture content increased parallel to the longer vegetation
periods.
The starch content of maize is mostly affected by the hybrid,
so on P=0.1% significance level. Regarding our results, it can be
stated, that the starch content shows a decreasing tendency
parallel to the longer vegetation periods. -
Parameter optimization of an inductively coupled plasma mass spectrometer for measuring arsenic and selenium
81-85Views:143In the last decades, an increased interest has evolved in arsenic and selenium. The aim is to understand the environmental, agricultural and biological roles of these elements. In the case of arsenic, the major reasons are the relatively high concentration of arsenic in marine biota (mg kg-1) and the arsenic contaminated drinking water bases of some Asian countries, as well as Hungary. The toxicity of higher level selenium content is also known; nevertheless, selenium is essential for several biological functions. Considering its essentialness, in our country, the insufficient selenium intake rate causes a lack of selenium. Measuring the concentrations of these elements provides crucial, but unsatisfactory information, as the speciation, i.e. the form of an element presented in a sample is also required.
In both cases, the most suitable method to determine concentration is inductively coupled plasma mass spectrometry (ICP-MS). Our objective was to optimize the variable parameters of the ICP-MS to attain the lowest (the best) detection limit. For this purpose, we investigated the effect of parameter change on net signal intensity and relative signal intensity. With the optimized parameter settings, the limits of detection for arsenic and selenium were determined, which are 0,032 ng dm-3 for arsenic, and 0,097 ng dm-3 for selenium. -
Examination of the impact of sowing technology models on the ear, constiuent and yield parameters of the yield formation elements of maize hybrids of different genotypes
17-23Views:109Production year 2012 has been characterised by climatic extremities. The weather of this year can be considered very contradictory in terms of maize production. The droughty conditions of the winter and spring months had a negative effect on both germination and starting vigour. The favourable weather of May-July created ideal conditions for intensive growth and generative processes; however the lack of precipitation in August and September had a damaging effect on the development of yield composing elements and grain saturation processes as well. Under such circumstances, the sowing date models caused significant differences in the yield and quality of the hybrids belonging to different growth periods. The growing period of the maize hybrids has been shortened as a result of the unfavourable climatic conditions.
Based on the trial results, it is verifiable that short growing period hybrids can be securely sown in draughty years even with a later sowing date, however using a later sowing date in the case of longer growth period hybrids may result even in a yield loss of 2–3 t ha-1. In the case of early and average sowing dates, with given yearly conditions the hybrids of the observed FAO 370-390 hybrid group provided the best result (12.40 t ha-1, 10.99 t ha-1), while in the case of the third, late sowing date the yield dominance of the FAO 290-350 hybrid group is the most significant (10.08 t ha-1).
The analysis of the yield composing elements found that the P9578 hybrid has the highest shelling ratio, while its cob is the shortest. The P9494 hybrid has a high yield and the highest thousand grain weight, while the DKC 4983 has the longest cob and its thousand grain weight is above 300 g.
The results confirm the fact that DKC 4590 has the highest yield potential and starch content, while in terms of oil and protein content the Szegedi 386 and NK Octet hybrids are the most important.
-
Chromatometric comparison of Eurasian Collared Dove (Streptopelia decaocto) and Feral Pigeon (Columba livia domestica) feathers
19-22Views:176Chromatometric examination of the plumage of birds is a poorly researched topic. We have approached this issue in primarily aspect of differences in plumage of species. Moulted feathers sample collection method has been increasingly used. Reliable identification of feathers becomes an increasingly important issue, hence need for an exact measurement-based methodology. Eurasian Collared Dove (Streptopelia decaocto) and Feral Pigeon (Columba livia domestica) primary, secondary and tail feathers were studied. Chromatometric parameters of feathers were measured in CIELAB color system and then statistical analysis (Independent samples t-test, Descriptive Statistics, Discriminant Analysis) was performed to compare the two species. Instrumental measurements has been confirmed the high similarity between colors of the two species, however species specific differences were also found. Lightless (L*) value were significantly characteristic of particular species, while the red/green (a*) and yellow/blue (b*) value had lower Predictive Power. We identified feathers and the variables which useable to separate the two species and determined the associated Confidence Intervals of these values. Our results may draw attention to a new potential direction for exact identification of the moulted feathers during sample collection.
-
The efficiency of the different elements of spring barley growing organic technology in the conditions the eastern steppe of Ukraine
209-213Views:127The effectiveness the use of new nutrient complexes is studied. It is set that a combination of nutrient complexes with organic and organicmineral nutrition background promotes to good growth and development of plants during the growing season, provides the best parameters of crop yield structure and the crop yield and economic efficiency of spring barley cultivation in the condition of the Eastern Steppe of Ukraine.
-
Comparative examination of a bacterium preparation (BACTOFIL® A10) and an artificial fertilizer [CA(NO3)2] on calcareous chernozem soil
75-80Views:109In a small-pot experiment a bacterium preparation, Bactofil® A10 and an artificial fertilizer containing Ca(NO3)2 in different dosages were studied on calcareous chernozem soil, concerning the readily available nutrient content of soil (nitrate-nitrogen, AL-phosphorus, ALpotassium content of soil, some soil microbial characteristics (total number of bacteria and fungi, cellulose-decomposing and nitrifying bacteria, CO2-production of soil), and the amount of the plant biomass.
The readily available nutrient content of the calcareous chernozem soil increased due to the treatments, except for the change in the soil nitrate-nitrogen content, which did not measure up to the control due to the effect of high-dosage Bactofil.
The treatments also influenced the examined microbial characteristics of the soil positively. The artificial treatments significantly increased the total number of bacteria and the number of cellulose-decomposing and nitrifying bacteria. The low-dosage Bactofil significantly increased the number of cellulose-decomposing bacteria and both Bactofil dosage significantly increased the number of nitrifying bacteria. The measure of the soil respiration grew in all treatments, but significantly only in Ca(NO3)2 fertiliser treatments.
The quantity of the plant biomass was grew in a low-dosage Bactofil and significantly in the artificial fertiliser treatments. The highest plant biomass quantity was measured in the high-dosage artificial fertiliser treatment.
In the correlation analyses we found some medium positive correlation between the soil chemical, microbiological parameters examined, and the plant biomass in the case of both treatment-forms.
Based on our results Ca(NO3)2 artificial fertiliser treatments on calcareous chernozem soil proved to be more stimulating regarding the
examined soil characteristics and the amount of the plant biomass, but the low-dosage Bactofil also positively influenced the majority of the
soil characteristics examined in terms of nutrient supply. -
Study of some physiologic properties of different genotype sweet corn hybrids
105-110Views:96The effect of nutrient-supply (control, N120+PK) and two different genotypes on the physiologic properties of sweet corn has been investigated in the crop-year of 2011 on chernozem soil in the Hajdúság region. The experiments were carried out at the Experimental Station of the University of Debrecen in Debrecen-Látókép. The experiment was sewn in two different sowing times: the 21st April can be considered as an early, while the 19th May as a late sowing time. The two involved hybrids were Jumbo and Enterprise. The applied plant density was 65 000 plants per hectare.
Our aim with this experiment was to study the plant production, just as the main affecting factors of its development and dynamics, like nutrient-supply and genotypes. We aimed to study and analyse the relationships between these factors and plant production. In this study following parameters were measured and calculated: photosynthetic activity, chlorophyll-content (SPAD-value), leaf area index (LAI) and leaf area duration (LAD). Regarding the analysis of photosynthetic activity values no obvious relationship between the measured values and the applied hybrids, just as nutrient-supply has been revealed.
Analysing the SPAD-values it can be stated that the chlorophyll-content of the measured leaves showed an increasing tendency due to the nutrient-supply. The highest values have been measured in the intensive cob development phase of the early sowing time plots.
Regarding the LAI-values we have found significant differences between the fertilizer treatments in both sowing time treatments. In case of the leaf area duration values – that is derived from the LAI values – nutrient-supply has positively affected the duration of the assimilation area. -
Evaluation of mineral element content of beetroot during the different stages of the growing season
459-469Views:247In modern nutrition, bioactive materials of different vegetables are especially important to be researched. The experiment was carried out on March 30, 2016 (sowing date). Mineral element content (B, Ca, Cu, Fe, K, Mg, Na, P, S, Zn) was evaluated on the 60th, 85th and the 105th day of the vegetation period. The data are presented as the mean of five varieties which can give the real state of these parameters of beetroot grown on lowland chernozem soil.
In the young beetroot leaves (60 days) the mineral element content was higher than in the older ones (85 days). The calcium and magnesium content of the leaves was much more favourable (10 times higher) than in the root. The potassium content of leaves has reached the amount of 5000 mg kg-1, but at the same time more than 3000 mg kg-1 was detected in the improved root. This value is favourable for the potassium supply of the human organism.
The sulphur content (1300 mg kg-1) of the leaves was the highest on the 85th day of vegetation period. Similar tendency was detected for boron content (2.45 mg kg-1), while for iron content it was higher (28.23 mg kg-1) in the younger leaves (60 days).
Finally, it can be concluded that the increased element content of beetroot leaves will be a favourable source of mineral element supply of the human organism.
-
Researches on the quick method of sugar productivity evaluation
26-29Views:63In a sugar factory it is necessary to be able to calculate very quickly the sugar productivity possible to obtain by processing the beet
having a certain technological quality. That is the reason why, in the following lines, it is presented a very quick method used by the Institute of
Alimentary Chemistry, the laboratory for sugar research and engineering, for such kind of quick calculations, but with a high theoretical and
practical precision. -
The Relationship Between the Moisture Content of Sweetcorn Raw Material and the Quality of the Deep-Frozen End Product
135-139Views:71One of the remarkable effects of the economical and social development is the changing of the eating habits, first of all increasing consumption of deep-frozen products. The spreading of the sweet corn under these vegetables is characteristic.
The parameters exerting influence on the quality of the deepfrozen sweetcorn is classed in 3 categories:
• Physical quality: foreign matter, clumps, blemished corn, broken kernel, miscut, pulled kernel.
• Organoleptical features: taste, colour, texture, and sweetness.
• Microbiological features: TVC, mould, yeast.
The moisture content of the raw material influences the organoleptical features to the highest degree.
We take continuously samples from the raw material arriving in to the factory to determinate moisture content, and from the product to specify the organoleptical features.
Based on the data of 2002 we can make the following findings:
The colour of the deepfrozen sweetcorn is less influenced by the moisture content. The taste is between 69% and 72% the most optimal, but over 72% get worse, more „milky”, water-tasted because of the underdevelopment of sweetcorn. The texture continuously becomes better with the increasing of moisture content. Under 67% of water the class „C” is typical, which means a taste with weak charasteric, a bit scathing or bitter, and texture with rubbery inner part and hard pericarpia. The decadence of taste is caused by converting a great part of sugar into starch.
The correlation between moisture and quality is varying by varieties; different varieties have their best quality by different moisture content. By our investigations the best harvest time is at the 69-72% moisture content. At this point are the organoleptical features the most optimal, and the grower has not the loss of yield caused by early harvesting. -
Pre-treatment of wastes containing keratin in industrial conditions
59-64Views:103The aim of the research was a development of a featherdegradation technology in industrial circumstances. During the experiments we determined the parameters of the critical environmental and technological limitation factors. Because of the high keratin-content the degradation (and composting) of the feather is difficult. With the developed technology huge mass of feather can be used fast and easily in biogas production and in the adjustment of the optimal element ratio of biomass. The industrial experiments were implemented in a 6m3 heatable double-walled
tank with stirring-shovels and aeration-system. The degradation process was followed with extinction measurements.
According to the experiments that were done the best results were given at the case which was heat-treated at 70°C, was injected with 1% bacteria concentration, and where 1:3 feather:water ratio was set if we consider the effectiveness of degradation and the hydraulical retention time. -
Opportunities of renewable energy use in Hajdú-Bihar and Szabolcs-Szatmár-Bereg counties
143-146Views:119Today it's an important role of the renewable energy resources, improving energy efficiency, thereby contributing to sustainable, ecofriendly use of local energy resources. Globally intensify the requirements and considerations related to environmental conservation. In this light, the main objective of the Hungarian energy concept is to maintain long-term security of supply, the economy and the environment occurring contradictions. So there is a need for systems that, in compliance with EU environmental directives, acceptable cost level will ensure the desired and expected security of supply. In the study, three companies and other technical parameters of these are examined. For each undertaking, different results were observed. For two undertakings, we are talking about realized investments, in one case a prognosis was examined. All three companies contributed to the requirement of renewable energy sources reaching 13% in Hungary by 2020.
-
Correlation between cultivation methods and quality in some vegetable species
313-317Views:111Quality parameters of 5 table root varieties were tested on 3 sowing dates with different cultivation methods: open field on 15 April and 9 July 2010 and under plastic tents on 19 August. The highest red pigment content (betanin) was measured in the varieties Akela and Mona Lisa (~ 80 mg 100 g-1) of the second (July) crop. This crop is in general use in Hungary. In comparison, in the late sown varieties (August, under plastics) a further pigment increase (10–20 mg 100 g-1) was observed in the same varieties as related to the earlier sowing dates. Yellow pigments (vulgaxanthins) showed similar trends. Roots of the late sowing date (with harvest in December) contained the highest vulgaxanthin values (103.3–124.18 mg kg-1).
Varieties reacted differently to temperature changes during the production period and thus to sugar accumulation. In the second crop (July) higher water soluble solids content was measured on the average of varieties (10.12%) in comparison to the April sowing (7.76%). Beetroots of the spring sowing are recommended for fresh market while the second (July) crop with autumn harvest can satisfy industry requirements. Late sowing under unheated plastic tents supply us with fresh beetroot in late autumn and early winter and prolong the usability of plastic tents.
Six lettuce species/subspecies were tested in the open field and under plastic tents in 3 repetitions for nitrate nitrogen, vitamin-C, polyphenol (gallus acid equivalent – mg GAE 100 g-1) and mineral element (Ca, K, Mg, Na) contents. Our measurements showed lower nitrate nitrogen values under plastic than in the open field (89.10± 8.13 and 127.06±14.29 mg kg-1) on the average of genotypes. Lettuce grown in the field had higher vitamin-C content (1.4 mg%) which is nearly 50% more than in plants under plastic. The highest polyphenol content was found in samples from the field with a conspicuous value of 804.17±56.47 mg GAE 100 g-1 in Piros cikória. Samples grown under plastic were richer in mineral elements (Ca, K, Mg, Na) which can be explained by the higher nutrient content of the soil. In this environment superior Mg content was observed in Edivia (4616.33±
311.21 mg kg-1).Besides the well- known headed lettuce, Piros cikória (Red chicory),the red leaved Lollo Rossa and Tölgylevel (Oak leaf lettuce) should be
mentioned which well deserve further testing in order to supply us with nourishing, healthy food. -
Analyses of a few physiological parameters of hybrid wheat in the case of different nitrogen supply levels
49-53Views:167The winter wheat is one of the most determinant crops because its role was always important in human’s life. To increase the average yield there are several possibilities, which are still not clear fields of agricultural plant production. Our main goal was to examine the responses of winter wheat genotypes to different amounts of nitrogen supplies. The sowing area of hybrid wheats are increasing, they may have different nutrient nitrogen utilization compared to varieties, and the question arose if it is possible to achieve same yield at lower nitrogen fertilizer application or not.
The present study analyzes the results of winter wheat (Triticum aestivum L.) from tillering growing stage. Under controlled conditions three different wheat hybrids were grown (Hywin, Hystar, Hybiza) with two different amounts of nitrogen supplies (optimal and the fourth part). The dry matter accumulation, relative chlorophyll content and nitrogen content were measured in order to draw conclusions from the different supplies of nitrogen for winter wheat genotypes and their physiological plasticity.
-
Evaluation of water balance in apple and pear trees
193-198Views:102A significant proportion of the aboveground green and dry weight of the plant constitutes the foliage. The canopy is an important factor
of plant growth. On one hand the canopy absorbs the solar energy, which is necessary for the photosynthesis, on the other hand accumulates
the absorbed nutrients by the roots, and the most of the water-loss happens through the foliages. The determination of the full canopy is not
an easy target. In our research we developed a measurement method to determine the leaf area. With the parameters of the examined tree
(leaf length and maximum width) and the data of ADC AM 100 leaf area scanner we determined the k-value, with which we can easily and
fast evaluate the leaf surface. Furthermore we defined from the water balance of compensation lysimeters the cumulative transpiration of
fruit trees and the efficiency of water use of trees. -
Results of Brown Bullhead Fingerling Rearing in Recirculating Fish Production Systems
46-50Views:90Predator fish species are in great demand, both in fish production and consumption. Because of their rarity and perfect meat quality, these species have considerable economical significance and increasing domestic and foreign demand.
The brown bullhead (Ictalurus nebulosus) has been in Hungary for more than 100 years, but not popular because of its early maturation rate, aggressive reproduction and slow growth. Despite of these properties, larger specimens (about 150-200 g) are marketable overseas.
Our objective is to ensure the adequacy of the brown bullhead in intensive fish farming and its biological, technological and economic references. The pre-experiments were performed at the Bocskai Fishing Co-operative in Hajdúszoboszló, where we reared the juvenile age class. In our university’s recirculating system we examinated the brown bullhead from the fingerling age class.
The black bullhead prefers artificial feed, and produces excellent growth parameters and a specific feed-live weight conversation ratio. -
Analysis of the main parameters of spring and summer food compound of roe deer (Capreolus capreolus L.) on the two hunting grounds of the Alföld plain
7-10Views:92It is widespread that roe deer are very choosy. It needs this sorting because the micro organisms, which help the digestion of high fibre plants, are missing in its stomach that is why they are mostly called „concentrate selectors” (Hoffmann, 1985, 1988, 1989).
These animals should mostly eat easily digestible plants with high nutrition level (pulses, buds, sprouts and flowers), and they are able to do this sorting because of their small mouth size. In winter there is a lack of these plants, so the high selectivity occurs only when the feed is in abundance.
Examining the amount and quality of vegetation available on the habitat of roe deer we can identify the species which can satisfy their feed demand. It is known, that roe deer as other large ruminants, from the plant abundance prefer certain plants and plant parts while there are others which are avoided. The identification of the eaten species and the rate of their occurrence in the feed is the first step to become acquainted with the
interaction between animal and the surroundings.