Search
Search Results
-
Calculating possibility of the leaf area index of apple and pear trees
229-233Views:110A significant proportion of the aboveground green and dry weight of the plant constitutes the foliage. The canopy is an important factor of plant growth. On one hand the canopy absorbs the solar energy, which is necessary for the photosynthesis, on the other hand accumulates the absorbed nutrients by the roots, and the most of the water-loss happens through the foliages. The determination of the full canopy is not an easy target. In our research we developed a measurement method to determine the leaf area. With the parameters of the examined tree (leaf length and maximum width) and the data of ADC AM 100 leaf area scanner we determined the k-value, with which we can easily and fast evaluate the leaf surface.
-
The effect of different microbial preparations on some soil characteristics
83-86Views:97In pot experiment the effect of different microbial inoculants and their combinations with NPK fertilizer and wheat straw on some soil properties (physical, chemical, and microbiological parameters) were studied. The experiment was set up in 2011 at the Institute of Agricultural Chemistry and Soil Science, in a three replications, in a random block design. The studied soil type was calcareous chernozem soil from Debrecen (Látókép) with ryegrass (Lolium perenne, L.) test plant.
At the end of the experiment in our laboratory the nitrate-nitrogen content of soil, the AL-soluble phosphorus and potassium content of soil, the urease enzyme activity of soil, the total number of bacteria and the number of microscopical fungi were determined.
The results of the study were the following:
– The straw treatment and the straw + biofertilizer combinations influenced positively the nitrate content of soil.
– The NPK fertilization and the straw+bacterial fertilizer combinations had significant positive effect on the AL-soluble phosphorus content of the soil.
– The biofertilization and the straw+biofertilizer combinations stimulated the AL-soluble potassium content of soil occasionally.
– The total number of bacteria was influenced by the NPK fertilization, the bacterial fertilization and the straw+bacterial fertilizer combinations significantly.
– In case of the number of microscopic fungi caused in some cases significant changes the NPK+bacterial fertilizer and straw+bacterial fertilizer combinations.
– The soil urease enzyme activity was increased in all cases strongly especially by the straw+bacterial preparation combinations. -
Effects of combined nutrient supply treatments on some physiological parameters of autumn wheat
241-251Views:137The Fleischmann Rudolf Research Institute in Kompolt is not only famous for plant breeding but the institute also surveys the effects of different nutrient supply methods since 1918. In 2017, we joined this research supported by EFOP 3.6.1 project. Our aim was to investigate photochemical processes – which is one of the most determinant in case of yield – of crops by in vivo field measurements. We measured the chlorophyll content of leaves using Minolta SPAD 502. We used miniPAM fluorometer to determine actual photochemical efficiency and non-photochemical quenching of PSII during natural light conditions and also to evaluate the pigment (chlorophylls and carotenoids) and water content of leaves we applied field spectrophotometer (ASD FieldSpecPro 3). We utilized these methods by various treatments (1. treatment with soil bacteria + head and base fertilizer; 2. treated by only head fertilizer; 3. treated by only base-fertilizer) in field experiment of autumn wheat (4.1–2.43–1.19 ha) in June, 2017. The difference between treatments was clearly detectable. In the case of the first treatment, physiological processes were more intense and the ripening occurred earlier. The obtained yield was the highest in the case of the area treated by soil bacterial. Based on the results, the first treatment can be recommended in practice.
-
Nitrogen Content of Hungarian Soils and Nitrogen Fertilization
51-61Views:90For crop production and agricultural production, the most important natural resource is the soil that can optionally renew. Paralelly with this, soil plays a major role in the geological and biological cycle of elements. As a result of the big (geological) and small (biological) element cycles, the elements and combines neccessary for organisms can accumulate in the soil creating suitable living conditions for plants and other organisms. Soil is a heterogenous system both horizontally and vertically, and soil constituents show great variety in all the three dimensions, in addition, most of the parameters can also change between two examination dates. When talking about the factors influencing plant production, one should take into account this variation and heterogenity in time and space. When making fertilization recommendations, these factors should all be considered. In any consultation system, most of the mistakes and errors made are due to the unsatisfying soil testing and the negligence of soil heterogenity. In the practice of fertilization the biggest mistake is the improper soil sampling, then comes the methodical mistake of soil testing, which is followed by the inaccuracy of instrumental analysis and the subjectivity of result evaluation, but the latter two are negligible compared to the others. Under normal, i.e. production conditions, the quantity and distribution of nutrients in the soil are greatly dependent upon the applied technology, the amount and form of the applied natural and artificial fertilizers and the quality of fertilization.
Fertilization recommendations are needed because in the layer which is accessible for plant roots only a part of the nutrient content is available for plants in a specific production cycle. An illustration of this is that though the upper 1 m layer of an average chernozem soil contains more than 5000 kg N, 12000 kg K2O and 1500 kg P2O5 (form of expression mostly used in Hungary), the application of fertilizer doses which are just fractions of these quantities is essential. This is due to the fact that the available amount of the total nutrient content depends from the quality of soil, the environmental factors (the physical and chemical qualities of the soil) and the specific nutrient’s qualities (solubility, adsorption). Knowledge of these processes and the examination of the factors influencing the actual nutrient content are vital for working out a fertilization practice, which does not put more strain on the environment than neccessary.All of the above mentioned should be considered when applying inputs in the fields. In a well-functioning practice that considers the economic and environmental conditions (unfortunately the present production and economic conditions do not enable an appropriate level and degree), three nutrients are supplemented generally (and were supplemented in the last decades): nitrogen, phosphorus, potassium.
Studying the nutrient balance of the Hungarian field production’s last hundred years, we can draw some interesting conclusions.
The nutrient balance became positive for nitrogen and potassium in the second half of the 1960’s, while for phosphorus it was positive from the first half of the 1960’s and this period lasted until the end of the 1980’s.
Neither before the 1960’s, nor since the 1990’s has the amount of nutrients supplemented in a specific year reached the amount of the nutrient uptake of the same year. -
Conceptional Model of Regional Agricultural Water Management System
199-209Views:91Our study focuses on the water management improvement of the Hajdúsági-löszhát (loess ridge). The Hajdúsági-löszhát (loess ridge) is an intensive agricultural area. At the same time, the problem of increasing water demand is still not solved, so towards of safety production irrigation should be improved. To realise this should be known not even agricultural water demands but industrial and urban ones as well, thus a complex water management system is required to be worked out.
In the first part of the research, the water demand in the area is mapped, then a conceptional model of the Hajdúsági-löszhát’s (loess ridge’s) water management system is created. After collecting data the water management scenario is summarized in a real time model splitted into five periods.
During the research, the instruments of spatial informatics (GIS) are used to get acquainted with the variation of the hydrological parameters in space and time. To understand and simulate the different decision making processes and to choose the right decision alternative, a decision support system is created with the use of spatial informatics data.
In addition, considering the potentially right decision alternative, irrigation will be started in practice, an effect and after-effect inquiry will be made, and the results will be analysed, evaluated and summarized. Finally, a suggestion to the most adequate irrigation technology will be made. -
Heat treated feeds in turkey feeding
19-22Views:93The main aim of our study was to determine the effect of expanded and pelleted feeds, as well as the only pelleted feed based on wheat and corn, on the production of turkeys. In May 2006,, a fattening experiment on turkeys was started on the starter farm of Habar Ltd in Szarvas, owned by the Gallicoop Corporation. 17 day old male turkeys were involved in the fattening experiment. The experiment lasted 117 days. At that time, theanimals were 134 days old. After the experiment was completed, they were slaughtered. The following parameters were examined: growth, feed conversion ratio, carcass traits. Turkey feed were produced separately at different times. Similarly to the standard method of turkey fattening, 8 phases feeding was carried out. The fattening experiment was adjusted on male turkeys in 4×12×6 grouping (4 treatments: expanded and pelleted, and only pelleted corn and wheat feed; 12 repeats: number of pens/treatments; 6 birds/pen) 6-6 turkeys from 12 pens per each treatments were measured individually from the 17th day (starter) and at the time of each following feeding changes and mortality. The average of the group was calculated. The average daily weight gain, proportion of the given feed per pen, feeding changes and mortality were determined. The average daily feed intake and the feed conversion ratio were calculated.
-
The effects of fertilization on the protein related properties of winter wheat
67-69Views:128The yield and quality of wheat are mainly determined by the plant production system, thus we studied the effect of mineral fertilization.
The field trials were set up in 1983 at the Látókép Research Institute of the University of Debrecen. We examined effect of different Nfertilizer doses (60 kg ha-1 N/P/K, 120 kg ha-1 N/P/K) on Lupus, Mv Toldi and GK Csillag's protein properties in 2012. During the tests, three quality parameters were determined: wet gluten content (%), wet gluten spread (mm/h) and gluten index (%). In the experiment the effect of different doses of N-fertilizers significantly influenced by the wet gluten content and gluten index of Lupus.
-
Effects of fermented and supplemented chicken manure on the nutrient management aspects of an apple orchard
117-123Views:75AIt is a huge challenge for farmers worldwide to successfully increase the organic matter content of their soils and improve their water balance at the same time. Therefore, the main aim of the study is to develop and test organic-based nutrient composite materials that can be successfully used by farmers to increase soil organic matter content, improve water management parameters and implement water-efficient technologies. The study was performed in the orchard of the Institute of Horticultural Science of the University of Debrecen in Hungary (Debrecen-Pallag). The experiment was set up in a ten-year-old apple (Malus domestica ‘Pinova’) orchard. In the trial, fermented poultry manure and superabsorbent polymers (SAP) were used at different doses to study their effects on soil properties and fruit quality. Applied composite materials increased the nitrate and organic nitrogen content of the soil. Treatments did not affect the sugar content of the fruits but significantly and positively affected the individual fruit weight and the titratable acidity of the fruits.
-
Microbiological and Chemical Characterization of Different Composts
106-111Views:68Composting of agricultural waste is considered particularly important from the point-of-view of environmental protection. Degradation of organic substance results in a significant reduction of waste volume.
The end product of the composting process, mature compost, can be used as soil coverage against excess loss of wastes, for mulching, for organic manure etc. The problem of composting has come into limelight in environmental studies and in agriculture.
The quality of the mature compost is determined by physical, chemical and biological parameters of the composting process which, in turn, depend on initial composition of the raw materials, the technology, e.g. regular mixing and moistening and on environmental factors. Quality is the key question in compost use.
We studied the composting process in compost windrows of different raw material composition. We measured temperature, humidity content, pH, organic substance content, nitrogen and carbon content.
We counted the number of bacteria, microscopic fungy, ammonifying and cellulose decomposing microorganisms. We directed the composting process with turning weekly (to provide oxygen) and watering (to provide humidity content 40-60%).
We set up windrows of 1 m3 volume from dry plant substances (cornstalk, pea straw, tomato stalk and crop, weeds) and cow manure not older than 1 week. The cow manure was used at ratios of 0%, 35%, 50%, 65% and 100%, respectively.
We measured changes in compost temperature relationship with outside temperature until they were almoust the same. Humidity was 40-60% in most cases.
At the beginning of the process, pH was slightly acidic-neutral; it later becomes neutral-slightly alkaline (pH: 6.93-8.02) as ammonia is liberated from proteins.
At the end of the process, pH decreased again, due to humification.
Organic substance content decreased as microorganisms mineralized them. Organic carbon content decreased gradually due to microorganisms used it as an energy.
Total nitrogen content increased until middle of july and decreased gradually until than.
The carbon/nitrogen rate were higher in the beginning, it decreased until july-august and increased by smaller degree until end of the process.
The number of bacteria was higher in the first three weeks and between june-september. The number of cellulose degrading bacteria was the highest in the first three month, the number of ammonifying bacteria was the highest from the end of may until sepember.
The number of microscopic fungy was significant in the second part of process, after july. -
Decreasing Energy and Water Use in the Meat Industry
24-28Views:61The technology supervisions are needed from time to time in order to involve the new research results, experience, new technologies and equipments organising principles into the production and to make it cheaper and with less expenditure to increase the profitability and competitiveness. In the course of our investigation we aimed the analysis of the traditional technologies and improving of it. In this article we detail the heat treatment curing process. We applied the principles of experimental design for the determination the main influencing parameters in the processes. Then we made simulations and modelling in seeking for the environmentally better technology programs. We developed a method for measuring the temperature development of products with small diameter using the similarity theory in unit operation. In the course of the analysis of the heat treatment processes we could state that the heat treatment time can be reduced significantly by decreasing the size of the product and choosing the right ratios among the surface heat transfer intensity, ambient temperature and involving the lethality obtained during the cooling phase. The total sparing were about 10-20%. We solved the problem associated with the sensor placement error using a plastic material (metamid). We establish a curve between the real product temperature and plastic rod temperature by which the monitoring of the process became more accurate. We determine the size modification for different product sizes. In case of curing we observed very similar phenomena. For the determination of the diffusion coefficient we adopted the Ball-method not using in this field till today. We could reduce the excess saltiness and loss of NaCl with about 5%.
-
Evaluation of the Green bean variety candidate BU-16
75-81Views:72This study presents the results of the variety comparison trials conducted with the French bean variety candidate BU-16 on sandy soil, during two years at the Research Center of the University of Debrecen.
The outstanding characteristics of this variety candidate are the early maturity, the showy pods (yellow, straight, cylindrical cross-section „pencil bean”) and the high yield potential.
The experiments were conducted with a randomized design, with five varieties and four replications. The varieties (of which two are foreign and three are domestic) were as follows: BU-16 fj, Maxidor, Paridor, Hungold and Budai piaci. The individual plots were 2 m wide and 4 m long. The seeds were sown at a density of 30 germs per m2, with a row spacing of 50 cm.
The following parameters were taken: time of flowering, time of green maturity, plant height, height of the lowest pod above ground level, number of pods per plant, distribution of the pods by the state of development (20 plants), usable pod length (1 kg of standard crop-yield), yield per hectare based on the number of plants per plot. The experiments were evaluated statistically with Excel and SPSS softwares.
Results obtained with the variety candidate BU-16:
– The time from the emergence to green maturity is 45 to 46 days, which is short as compared with the other cultivars studied.
– Plant height is 38cm (two years average), which is among the highest ones, together with Paridor.
– The pods are set high above the ground level similarly to Paridor, the height of the lowest pod is 19 cm.
– The average number of pods per plant is 13 (two years average) similarly to Paridor and to Maxidor.
– The distribution of pod size in 2007 is as follows: 68% of the pods of BU-16 is of the standars size, which is a good rate. The value of this trait for the other varieties is 60 to 63%, except for Paridor, the value of which is similar to that of BU-16.
– The usable pod length (10 to 14 cm) is 63% in 2007 and 84% in 2006. Similar pod length rates were obtained for Maxidor, while the rate for Paridor is as high as 91%.
– The total yield and the standard yield of BU-16 is among the highest ones.
According to the results obtained and presented above, the variety candidate BU-16 is the earliest maturing among the varieties tested with high yield potential which, however, is not significantly different from that of the others. Significant differences can only be detected in plant height and the number of pods per plant. Considering the results, BU-16 is to be further tested. -
Water managed properties of apple and pear trees based on lysimeters
129-132Views:135A significant proportion of the aboveground green and dry weight of the plant is constituted by foliage. The canopy is an important factor of plant growth. On the one hand, the canopy absorbs solar energy, which is necessary for photosynthesis; on the other hand, it accumulates the nutrients absorbed by the roots, and most of the water-loss occurs through the foliage. The determination of the full canopy is not an easy target. In our research, we developed a measurement method to determine the leaf area. With the parameters of the examined tree (leaf length and maximum width) and the data of the ADC AM 100 leaf area scanner, we determined the k-value, with which we can easily and fast evaluate the leaf surface. Furthermore, we defined from the water balance of compensation lysimeters the cumulative transpiration of fruit trees and the efficiency of water use of trees. From the examined trees were made a 3D depiction, which show the shape, branching and the location of trees.
-
Influence of H-FABP gene polymorphisms on slaughter value of hybrid pigs
55-60Views:211The H-FABP gene was defined as a potential candidate gene influencing the fat deposition traits, primarily the intramuscular fat content. The aim of this study is to define whether the previously reported gene mutations are connected with the slaughter traits measured in a standard slaughterhouse. The study included data from 405 gilts and barrows from 2 different samples. The two chosen mutation (HFABP1: c. 103 T>C, HFABP2: c. 1970 T>C) were detected in one reaction with PCR-RFLP (Polymerase Chain Reaction-Restriction Fragment Lenght Polymorphism) method with HinfI restrictoin enzyme. The allel frequencies are as follows: 103T(H)=0.75; 103C(h)=0.25, 1970T=0.32; 1970C=0.68. A HFABP1 mutation has significant effect on backfat thickness and lean meat % at stable 1 (sample 1), but there were no effect at stable 2 (sample 2). The analysis of values of production traits, depending on HFABP2 genotype did not reveal significant differences. Based on this study we can’t get a clear conclusion on the impact of polymorphisms on production parameters. In the examined flock the allele frequency of mutation in 5 'UTR is identical to the literature data, i. e. the more favorable variant regarding the intramuscular fat content is predominant in the population.
-
Susceptibility of maize hybrids to corn smut diseas
39-42Views:142Corn smut disease is one of the most common maize diseases. In the previous years the disease lost from its importance, however nowadays it is becoming more and more important and widespread. The protection against it encounters great difficulties, therefore it is important to emphasize prevention and resistance based protection. The aim of the research was to investigate under laboratory circumstances the resistance of Hungary’s most commonly cultivated maize hybrids to corn smut disease. Twelve species were investigated. We distinguished two susceptibility groups within the hybrids based on the investigated parameters. The results are intended to assist the protection against corn smut disease and to make a suggestion for the farmers so that they could apply more environmental friendly and economical production.
-
Early evaluation of use of fermented chicken manure products in practice of apple nutrient management
195-198Views:106According to the Green Deal efforts, the importance and relevance of organic fertilization will increase in the near future. Therefore, the investigation of the effects of different organic fertilizers on soil productivity and nutrient supply is a priority area of agricultural research. Organic fertilizer experiment was conducted in an eight-year-old apple (Malus domestica Borkh.) orchard at Debrecen-Pallag. In the trial Pinova cultivar was used. In this study, two different fermented chicken manure products were added to the soil (in 20 cm depth) to test their effects on soil nutrient status, plant uptake and fruit quality. It was found that the applied treatments slightly increased the pH and nutrient levels in almost all cases, but significant effect was not observed in all treatments compared to the control. Leaf nutrient contents (N, P, K, Ca and Mg) were measured in the experiment. Leaf nutrient status was not affected by the fermented chicken manure treatments. However, used treatments had strong effects on the fruit characteristics and inner parameters, such as fruit diameter and Brix value. Moreover, it was established that the applied organic fertilizers increased the yield significantly.
-
Evaluation of the correlation between SPAD readings and absolute chlorophyll content of maize under different nitrogen supply conditions
121-126Views:324Currently, one of the most important objectives of agriculture is to maintain the principles of the sustainability. The use of precision technologies in agriculture belongs to this topic. The use of precision technologies is increasingly widespread in the cultivation of various agricultural crops, including maize. Sensing is an important part of these techniques. In our experiment we compared two methods: measuring relative chlorophyll content and the method of determine the extractable chlorophylls. The experimental plant was maize (Zea mays L.) and the measurements were performed at an early development stage (V8) of three genotypes. Three levels of nitrogen (0; 80; 160 kg ha-1) were applied during the experiment. The relative chlorophyll content was measured by SPAD-502 (Minolta, Japan) and a handheld GreenSeeker (Trimble, USA) device. The extractable total chlorophyll content decreased in parallel with the increased nitrogen level. The obtained SPAD values were diversified furthermore the NDVI values have not been changed for the effect of different nitrogen fertilization. In the early stages of development of maize, these parameters need to be complemented with other measurements to provide reliable information about the crops nitrogen status.
-
The effect of bentonite on the quantity change of soil microorganisms, the CO2-production and the activity of saccharase enzyme
287-293Views:74We examined the impact of bentonite – the perspective improving material of sandy soils – and treatments of livestock manure composted with bentonite on sandy soils, within the framework of a small-plot experiment.
The adjustment of the experiment was made on the Experiment Site of the Nyíregyháza Research Centre of the University of Debrecen, Centre of Agricultural Sciences (UD CAS). We collected soil samples from parcels treated with increasing bentonite doses (5, 10, 15, 20 t/ha) on the one hand, and from the parcels treated with livestock manure composted with increasing doses of bentonite, on the other.
We performed laboratory research in the soil microbiology laboratory of the Soil Science Faculty of UD CAS DAS, during which we determined the total number of bacteria, the quantity of microscopic fungi, the number of cellulose-decomposing bacteria, the CO2-production of the soil and the activity of saccharase enzyme.
During the evaluation of the examinations, we made a statistical analysis using SPSS 9.0. We determined the average of measurements, the standard deviation of controls, the standard deviation, the significance value and we also performed a correlation analysis.
Concerning the impacts of bentonite treatment and the treatment of livestock manure composted with bentonite on the examined microbiological features of sandy soil, we can summarize the following:
• Our results prove that the microbiologic activity of the soil has increased owing to the impact of bentonite treatments regarding total number of bacteria and the quantity of microscopic fungi. ”Pure bentonite” treatments – although not significantly in every case – increased these values, but larger doses decreased them. The treatments of livestock manure composted with bentonite resulted in a larger increase regarding both parameters.
• The number of cellulose-decomposing bacteria was increased by the low doses of both series, and was decreased by the higher doses. Higher bentonite doses decreased it in a higher – significant – degree than those of treatments of livestock manure composted with bentonite, whose low dose caused salient number of bacteria.
• Regarding the carbon-dioxide formation, we have experienced an increase even in the case of low dose treatments (nevertheless, the increase did not prove to be significant), but – similarly to the quantitative changes in the number of cellulose-decomposing bacteria – the large doses of both series of treatment decreased the CO2-production of the soil.
• Bentonite also increased the activity of saccharase enzyme significantly. We learned that”pure bentonite” treatments increased the activity of the enzyme to a higher degree than composted treatments. Moreover, it can be stated that the treatments of larger doses of both bentonite and livestock manure composted with bentonite have decreased the enzyme activity – not significantly, though.
• Based on the correlation analysis, it can be stated that as an impact of the treatments, the microbiological activity of the soil has also increased with the increase of the number of soil microbes, as in both treatment series we have experienced a tight positive correlation (r=0.81-0.82) between the change of total number of bacteria and the CO2-production of soil. In both treatments, there was a medium correlation between the total number of fungi and soil respiration (r=0.63-0.63). Furthermore, it can be stated that the usage of organic manure had a positive effect on the activity of cellulose-decomposing bacteria, as in this treatment series there was a positive correlation (r=0.65) between this physiological group and CO2-production. Both treatments prosperously impacted the activity of saccharase enzyme, because there was a medium correlation (r=0.62-0.64) between the activity of the enzyme and soil respiration. -
Development of maize production technology that increase the efficiency of bioethanol production
17-26Views:82Maize is one of the most important crops worldwide and also in Hungary, it can be utilized for multiple purposes: as a feedingstuff, for human nutrition and for industrial processing. In the last decades, the per ha yield of maize varied greatly in Hungary, between 2004 and 2006, it was 6.82-7.56 t/ha, while in 2007, it was only 3.6 t/ha. Resulting from this, the price of maize became 2-2.5 times higher. The high price hinders bioethanol production. The largest per ton amount of bioethanol, 387 l, can be produced from maize.
In addition to its classical utilization as feed and food, the industrial use (especially for bioethanol production) of maize is increasin.
For industrial production, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2007.
The applied fertilization treatment was N 120, P2O5 80 uniformly, and five different dosages of potassium: K2O 0, K2O 100 (KCl), K2O 100 (Kornkáli), K2O 200 (KCl), K2O 200 (Kornkáli) kg/ha active ingredient. The applied plant densities were 40, 50, 60, 70, 80, 90 thousand plants/ha.
The yield of maize hybrids in the fertilization experiment ranged between 10.53 – 14.62 t/ha. Both regarding the form and dosage, 100 kg/ha Kornkáli proved to be the best potassium treatment. Regarding the inner content parameters, the highest starch content in the average of treatments was obtained for the hybrid PR36K67: 73.57%, and its yield was also the highest, so this hybrid proved to be the most suitable for bioethanol production. The highest protein content was observed for the hybrids KWS 353 (12.13%), which can be favourable for feeding purposes.
Most of the hybrids gave the highest yield at 80 thousand plants/ha plant density, however, hybrids PR36K67 and Mv Tarján achieved the highest yield at 90 thousand plants/ha.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance. -
Survey of the chance of secondary salinization in the hobby gardens around Karcag
199-205Views:89Irrigation involves the risk of secondary salinization on certain areas. The increase of the level of salty groundwater or the application
of poor quality (salty) irrigation water can cause secondary salinization. Irrigation from drilled wells is very characteristic in the small
hobby gardens located around Karcag during the frequently droughty summers. Mainly vegetables and fruits with high water demand are
grown in these gardens, hence quite a large amount of subsurface waters are used for irrigation. Water samples were taken from 46 drilled
wells located in the hobby gardens around the town of Karcag and analysed in order to survey the risk of secondary salinization. On the
base of the results of the analyses and some indexes calculated from the chemical parameters of the irrigation waters, it can be established
that none of the investigated wells supply water that is suitable for irrigation without improvement. -
Examination of Possibilities for Increasing Sugar Content
202-206Views:33The result of sugar beet production is highly effected by the quality and the yield. Those agricultural techniques are very important which can be applied at low cost to improve these parameters. Such an opportunity is to increase sugar yield by foliar fertilization with nutrients and by treatment with bioactive fungicides.
In my small block trial I examined the effect of the magnesium and strobilurin active ingredients in different combinations and at different application times on the quality and the yield of sugar beet.
I found that there was a signifficant increase in sugar content on that blocks which were treated with a bioactive ingredient combined with magnesium in the middle of July and on those which were sprayed with bioactive ingredient in August. -
Fruit quality of sweet cherry cultivars in superintensive orchards
75-81Views:167The fruit quality of 15 sweet cherry cultivars (’Canada Giant’, ’Celeste’, ’Chelan’, ’Ferrovia’, ’Germersdorfi Rigle’, ’Katalin’, ’Karina’, ’Kordia’, ’Linda’, ’Regina’, ’Sam’, ’Sandra Rose’, ’Sunburst’, ’Sylvia’ and ’Techlovan’) was studied under super-intensive growing conditions at Nagykutas. We measured the fruit diameter, fruit width, fruit height, stem length and stem weight, fruit and pit weight and the total dry matter content. There were large differences among the cultivars. These differences are due to the genetic characteristics of fruits because all other conditions were the same. For 11 cultivars, we collected fruit samples several times /2-4/. We examined on this cultivars all the above listed fruit quality parameters. When examining these samples, we have gained information how earlier or later than optimal harvest time influences fruit quality.
-
The effect of keeping technology on the microbiological status of raw milk
67-75Views:100The importance of the quality of raw milk increased after Hungary had joined to the EU. On delivery of raw milk, the microbiological quality, especially total plate count of the milk is very important. Twenty-two farms (7 large, 4 medium-sized, and 11 small farms) were included in the study. We considered the different farm size, keeping- and milking circumstances during the selection of farms. The examined large farms use loose housing system (cubicle, deep litter) and milking parlour. Most of them use preand post-milking disinfection. In the medium-sized farms, loose,
deep litter and tie-stall housing system, as well as milking parlour, pipeline milking and bucket milking occurred. All of them use preand post-milking disinfection. Small farms use tie-stall housing system, bucket milking and udder preparation by water. Unfortunately, they do not use pre- or post-milking disinfection. In the large and medium-sized farms mainly Holstein Friesian, in the small farms Hungarian Simmental breeds can be found.
The aim of our research was to examine the microbiological status of the raw milk produced in dairy farms (total plate count, coliform count, Escherichia coli count, Staphylococcus aureus count, psychrotroph bacteria count, furthermore yeast and mold count); sources of the contamination; connection between the microbiological quality of produced milk and housing-, milking technologies of farms; furthermore the hygienic circumstances of milking and milk handling of the farms, by the examination of coliform bacteria and Escherichia coli contamination.
During the examination of the connection between the different farm sizes, various housing- and milking forms and the microbiological characteristics we observed similar tendencies in the case of total plate count, coliform count, yeast and molds count, furthermore psychrotroph bacteria count. The value of these parameters was significantly higher in small farms, and infarms which use tie-stall housing forms, bucket milking, udder preparation with water, and which do not use pre- and post-milking disinfection.
The results showed that besides cooling, the milking procedure and the type of udder preparation had the largest effect on the total plate count. Statistical analysis shows that in medium and small farms the combination of pipeline milking – tie stall housing system – disinfectant preparation of the udder; in large farms the combination of milking parlour – loose cubicle housing system – dry preparation of the udder are the most appropriate in the aspect of the total plate count. We experienced that in farms where the hygienic instructions are not followed – and therefore
equipment used during the milking and handling of milk is very contaminated – or rather the separation of mastitic cows’ milk is not appropriate, different microorganisms may contaminate the produced milk. -
Morpometric study of Hungarian honey bee (Apis mellifera L.) colonies
59-63Views:238The honey bees are essential for the pollination of agricultural plants. The Pannonian honey bee, Apis mellifera pannonica, is native to Hungary, only these subspecies are being bread in our country. The parameters have been separated the pannon and italian honey bee subspecies, the colour of tergit, the cubital index and proboscis length. The morphometric analisys is of special importance because this, on the one hand, shows correlation with honey bee production and on the other hand, the pure morphometric charactersitics is the basis of any potential honey bee export. Mitochondrial DNA and microsatellites are the common methods to define genetic diversity and the separation of subspecies.
-
Effects of Tillage Systems on Physical Status and Organic Matter Turnover of the Soil
42-45Views:154The cultivation technology for those plant, that play a key role in arable land production need to be renewed in order to reduce production costs and to protect arable land. The modernisation of technologies can only be achieved by applying appropriate tillage systems. Our measurements were carried out on chernozem soil with lime deposits at the Látókép Experimental Station of the Center for Agricultural Sciences, Debrecen University, in long term tillage experiments set up in 1989. We examined the typical physical parameters, the albedo, field capacity, the bulk density of the soil, organic carbon content (humus %) and the measured pH-values in the water solution within the two tillage variations. We have also modelled nitrogen cycle formation in different treatments.
A significant difference occured between the albedos of the two soils, which may be the result of significant amounts of stem remaining on the surface in the case of the reduced tillage method. The yellow, waxy stem of maize reflects 21% of the sun’s rays, especially at the beginning of the vegetation period, when its decomposition has only just started. This delys the warming up in early spring, which delays the sowing time of maize and reduces evaporation. In the two tillage variations, the water management characteristics do not differ practically, the wilting point field capacity are in accordance. In reduced tillage methods, the so-called „plough-pan” can be well measured at 15-20 cm, while in winter ploughing it is at 30 cm. The humus % of the soil does not differ in the two tillage variations, but due to the difference in bulk density this means a different humus and organic nitrogen content. The organic nitrogen content is greater in the reduced tillage method. On the basis of pH value evaluations, we could not detect significant differences in the two tillage variations. The organic nitrogen content of areas where reduced tillage method was applied is higher than in areas where conventional winter ploughing was applied. -
Using phenotypic correlations in the breeding evaluation of Hungarian Sport Horse mares
38-43Views:103The aim of this paper is to analyse phenotypic relationships between self performance test (SPT) parameters of Hungarian Sport Horse mares. Establishing these relationships may contribute to develop a breeding value estimation model. Data were given by the Association of Hungarian Sport Horse Breeders.
The analysis is based on the SPT results of 3 and 4 year old mares from 1993 to 2004. Our aim is to determine practically explainable correlations among conformational traits (type, head, neck, saddle region, frame, forelegs, hind legs, regularity of movement, impulsion and elasticity of movement, overall impression); free jumping performance (jumping style, jumping ability, observation during training) and movement analysis traits (walk, trot, canter, overall impression, test rider’s score). A further aim is to determine correlations between free jumping performance and movement analysis traits.