Search
Search Results
-
Material Stock and Flow Analysis within the Agricultural Building Sector Based on Local Database
297-320Views:141The purpose of the paper is to analyze on micro level the stream of building materials needed for raising cattle. The scope of the produced material flow chart will cover the inflow and storage of the materials. The overall objective of material flow analysis is to contribute to the data inventory development process which is needed to use these construction materials as secondary raw materials in the future. The assessment is based on a concrete new development in a Hungarian region being carried out nowadays as a development and modernization of an existing cattle raising farm. Driven by the concern of resource depletion, further research on higher level, based on larger database will be needed to verify the estimated national level results for the magnitude of growth of anthropogenic stocks.
-
Investigating the Effects of Active Cooling in 3D Printing
39-47Views:1423D printing is an increasingly widespread manufacturing process. With the development of machines and materials, the technology is becoming more accessible and easier to use. However, the technology's specificities mean that it requires knowledge of manufacturing technology. In some cases, it is necessary to solidify the freshly deposited layers as soon as possible in the event of large overhangs. This can be achieved by active cooling, which in turn can affect the material properties of the part. This research investigates the effects of active cooling during production.
-
Urban Transportation Problems and Issues in Homs-Syria: Analytical Study of the Current Condition and Proposing Future Solutions
30-42Views:339Cities in the north middle east are known for their past and old valuable heritage, with a complex master plan of each one. Homs city is Syria is one of them, it has a history dates back to 2000B.C. with a unique formation of the city. However, the urban area of Homs has a very distinctive characteristics, but unfortunately it suffers from the transportation system operated. The congested and unorganized planning process have led the city to a complete mess and disorders, for all categories of its inhabitants. This study analysis the components of the transportation system, and identifies the greatest issues and problems the inhabitants suffer from, by locating the driving forces and the causes of these issues, and generally asses the quality of the system itself. Therefore, a holistic approach is proposed to improve the transportation system, and suggests some key plans to shift the city to a higher level of development. By locating the strength points, and detect the benefits of these strength points and exploit them. By evaluating the road network and create a new system that mitigates the negative environmental impacts (emissions, noise…) and reduce the crowded gathering of inhabitants, which caused a severe stress in their daily life. Overall, an attempt of implementing a new transportation system to contribute in the development process, and opens the possibility to develop other systems of the city in a sustainable framework.
-
Development of Efficient Drive Based on Self-help
147-151Views:96The efficiency and the life rating are essential characteristics of mechanical drives. The traction drives with proper geometry can avoid the geometrical slip and their efficiency can exceed that of the gear drives. The elements has hardened steel surfaces, the lubricant is rheopectic. There is no danger for thinning the oil film and consequently for connecting the asperities. The traction drives are relatively noiseless, they are applicable for increasing speed in particular. There are some problems to be solved in friction drive. This is the necessity of clamping force. A simple machine element usually make a constant clamping force, a tensioning mechanism can be too complicated. The ideal solution is a simple design which assure a clamping force that is proportional to the instantaneous external load requirements. The authors suggest a modified machine element – a helical torsion spring, an elastic one, instead of the original, rigid annular wheel – that comprises both the driving and clamping functions, and the latter one is proportional to the external load, so that the principle of self-help operates.
-
The Appearance of Dark Triad Among University Students
579-588Views:296In recent decades, the examination of the so called “Dark Triad” – narcissism Machiavellianism and psychopathy – occupies a prominent place in personality research. These socially undesirable characteristics, which, to some extent are present in everybody, can play an important role in the workplace. Dark Triad members are those, according to the literature who are strong in all three features. In my paper I will present the results of a study I conducted among the students of University of Debrecen Faculty of Economics and Business. I analyse the Dark Triad characteristics of students with the help of a validated measure the Dirty Dozen. In my research I try to find answer to what extent these personality traits appear in the examined sample? Is there any difference depending on the background variables (age, sex, educational programme ...)? Are my results consistent with those described in international research?
-
Six Sigma in preconstruction: case study on improving of reinforcement steel processing
49-60Views:129Lean process improvements are crucial for enhancing production efficiency. In my research, I examine the application of the DMAIC methodology to develop the MEP facility within the framework of lean Six Sigma. Highlighting the challenges of precast concrete production, my study details how lean management aids in efficient process design and measurement. Introducing lean Six Sigma methodology involves standardizing processes and ensuring their effective development, contributing to the facility's efficiency
-
Cultural diversity, Intercultural Competence, Tolerance and the Economy: a Review
98-109Views:203Cultural diversity is generally a controversial topic in the literature. Whereas some studies proved that it has economic benefits, others denied that. However, it is possible to avoid the costs related to that through enhancing each of intercultural competence, on the level of firms, and social tolerance, on the level of economies. To investigate that, the study used literature review analysis. Based on the literature, cultural diversity plays important role in enhancing innovation and entrepreneurship which are necessary for economic development. However, it may result in different challenges such as a lack of trust and conflict. Therefore, it could be feasible to manage and benefit from cultural diversity in the companies through cross-cultural training as well as cultural diversity management. On the other hand, economies can avoid cultural diversity's costs by adopting the policies and institutions which are necessary for enhancing the level of social tolerance among people.
-
Some Sources of Misunderstandings in Intercultural Business Communication
91-101Views:1291It is always a big challenge for all types of companies anywhere in the world to survive in the globalised and accelerated world. Their primary objective is to stay competitive, keep or even enlarge their market share while keeping their costs at a minimum level. These corporations often cross borders and operate on a multinational level. In order to do that successfully they need flexible workforce: people who have a high level of intercultural competencies and can help their corporations to achieve their aim of profit maximising. It is widely accepted that culture and languages are among the most significant impacts on intercultural communication. In this paper first I am going to interpret intercultural communication and the role of culture and then look at different intercultural skills and the role of languages in intercultural communication. Some areas that might cause problems in intercultural business communication will also be described.
-
Artificial Intelligence in Human Resources Information Systems: Investigating its Trust and Adoption Determinants
749-765Views:3616With the rapidly emerging trend of employing Artificial Intelligence technologies within modern economics. This study is an attempt to fill the research gap associated with the factors that have influence with the adoption of artificial intelligence in human resources information systems on HR-leaders intention to use it. It empirically investigates the influences that trust, technological readiness, facilitating condition and performance expectancy on HR-professional’s behavioral intention to use AI in HRM. Besides, examine the moderating effect of age and experience on the proposed associations. Data were collected from by online questionnaire from 185 HR managers. A structural framework was introduced to test the relationship between study latent variables. Result exhibited that trust and performance expectancy has a significant influence on HR-professionals behavioral intention to use AI-HRIS. Trust and technological readiness showed a significant influence on HR-professionals performance expectancy of using AI-HRIS. While facilitating condition, organizational size and technological readiness did not show a significant influence on HR-professionals behavioral intention toward using AI-HRIS. Lastly, Age and Experience did not have a moderating effect on trust and performance expectancy association with the behavioral intention toward using AI-HRIS. The findings of this study contribute to the theory development of information technology diffusion in HRM.
-
Research of Healthy Behavior at Faculty of Economic Sciences' sport sciences' students at the University of Debrecen
165-180Views:486Nowadays the healthy lifestyle is getting more and more attention, thanks to emerging health trends. The review of the literature summarizes the latest results of research on two aspects of healthy behavior. In our primary research, we measured the sporting and dietry habits of sport sciences’ students at University of Debrecen. In the case of sporting habits, we asked the students about the frequency and motivation of sports. In the other hand we asked them about their dietary habits about the frequency and amount of vegetable, fruit and fluid consumption. After the evaluation of survey we can say that the 70% of respondents are satisfied with their physical condition. We can tell about the frequency of vegetable and fruit consumption is that the 15-20% of students eat vegetables and / or fruits daily. However, it can be said about the fluid intake of students that seventysix percent of them are consuming fluid daily.
-
Derivation of ZF6HP26 Speed Transmission
48-63Views:154Due to the increasing importance of automation, automatic transmissions have appeared. The different ratios of the transmission may be achieved by braking and coupling the corresponding elements of the planetary gear sets connected in series. The focus of the study is on the ZF6HP26 transmission. After disassembly and clarifying the teeth number of the gears, we derived the equations parametricly providing the ratios using the speed equations published in the literature. The ratio of each gear is calculated by substituting the particular teeth numbers into the derived equations.
-
Implementing 5S in a Hungarian Company
161-173Views:312The methods and tools used by Lean management can be used for any activity that is specifically introduced to the company. On this basis, the objective of this paper is the implementation of a Lean office with a 5S system transformation into the traditional office environment of a private business. During the workflow, it is also planned to create new habits in this narrow space that will incorporate the organizational culture into the everyday life of the business making the administration more effective. The 5S concept is new and helps the company to operation on a larger scale with fewer inputs than before. Figures are made for better understanding and a Red Tag is created which is the first step of the process. Red Tag tells the employees about the history and the process which will be needed on it. The basic of lean thinking is the contunious improvement in the quality of the product while minimaxing the wastes created during the process. The Next Broker Consultancy Ltd adopted this new way of management and made sure that all the necessary measurement are taken to insure smooth flow of the process.
-
Measurement of Friction Losses of Electro-Pneumatical Valves with Industrial Devices
68-72Views:97The pneumatic devices are frequently used in several fields of the industry but the losses and pressure
drops of the pneumatic system are not really investigated. These losses can cause great property damages during long uptime because the compressed air is a quite expensive energy source. I designed a measuring system which is able to measure the friction losses of electro-pneumatic 5/2-way valves (monostable and bistable too). It is possible to choose between manual and automatic operation modes as well. In the automatic mode the system makes measurements in three different user-defined pressure levels. In the manual mode the measuring pressure can be set between 2-6 bars. An automatic evaluate program is also an important part of the created system. It gives the possibility of the fast evaluation of the saved data and it could be the base of a fast report generating application. -
Digitalization Process by Agricultural Companies, or the Results of a Questionnaire Survey
625-636Views:261The term “information society” first appeared in Japanese social science in the early 1960s (Z. Karvalics, 2007). The interpretation of the concept has undergone significant changes over the past decades, showing that dynamically developing societies, which are undergoing constant changes due to the rapid development of information, information management and the dynamism of the digital world. The close relationship and connection between information and information technology has become a fundamental factor in the societies of today, the organizations life, which generates inevitable, sometimes serious debates and profound changes. Economic operators must necessarily be resilient to technological change. We should think of the time of the Industrial Revolution, when modern weaving machines flooded the factories. Otherwise, a resilient organization will not survive in an evolving and ever-changing dynamic economic environment. Of course, this is true of agriculture as well, just as it is for other sectors of the national economy. On the one hand, my assumption on the basis of which my questionnaire was compiled was that enterprise management systems are increasingly used by enterprises in agriculture due to the diversification of activities. At the same time, I assumed that the size of a business could influence the use of information technology (hereinafter IT), so I hoped that my research would provide reliable data on this as well.
-
Automation Capabilities for the Logistics Service of Jobshop Production System
210-221Views:465One of the most important subsystems of manufacturing is the logistics system for transporting materials between technological phase. It is integrated depending on the production structure. The special feature of highly flexible workshop system production is that the material handling system is typically separate and the movement needs occur independently of each other, so the flexibility of the material handling system is required to achieve the expected production goal. In practice, therefore, the organization and execution of material handling is to a considerable extent dependent on the human factor. The purpose of this research is to explore the potential for automation of material handling activities in this particular production environment.
-
Manufacturing Process Optimization and Tool Condition Monitoring in Mechanical Engineering
72-89Views:194The optimization of manufacturing and production processes with various computer software is essential these days. Solutions on the market allow us to optimize and improve our manufacturing and production processes; one of the most popular software is called Tecnomatrix, which is described in this paper. Tool condition monitoring is a vital part of the manufacturing process in the industry. It requires continuous measurement of the wear of the cutting tool edges to improve the surface quality of the work piece and maintain productivity. Multiple methods are available for the determination of the actual condition of the cutting tool. Vibration diagnostics and acoustic methods are included in this paper. These methods are simple, it requires only high sensitive sensors, microphones, and data acquisition unit to gather the vibration signal and make signal improvement. Extended Taylor equation is applied for tool edge wear ratio. Labview and Matlab software are applied for the measurement and the digital signal processing. Machine learning method with artificial neural network is for the detection and prediction of the edge wear to estimate the remaining useful lifetime (RUL) of the tool.
-
Analysis of the Operation of a Vocational Training Institution in the Light of the Models of Educational Management
51-68Views:137The operational characteristics of educational institutions are substantially influenced by educational policy choices. In July 2015 the establishment of Centers of Vocational Training marked the start of a new chapter in the management of school-based vocational education and training under a new organisational structure. As part of the Centers of Vocational Training, Vocational Trainging Institutions have become member institutions with legal personality . The introduction of centralised management has significantly changed the framework and the way in which institutions, as educational organisations operate, which has had an impact on management and governance processes and thus on the functioning of the whole organisation. According to the different management and governance processes applied in practice in educational institutions, educational institutions can be classified into different models of educational management, whose literature theory we call upon to examine the functioning of a vocational training institution. The aim of our study is to examine the functioning of a Vocational Training Institution in the light of the models of educational management. We will examine the operation of a Vocational Training Institution in the case of a Vocational Training Centre and its member institution operating in Szabolcs-Szatmár-Bereg County. Our study is based on the method of document analysis. In the course of the analysis, the documents of the examined institutions were analysed according to certain characteristics of the key dimensions of the educational management models defined in the literature. The results of the analysis provide an overall picture of the type and nature of the management of the vocational training institution examined.
-
The Potential of Online Workouts for Fitness Trainers
49-60Views:385The importance of physical activity for both physical and mental health is unquestionable. For leisure athletes, fitness clubs can be considered as popular facilities for everyday workouts. Classes run by qualified trainers, whether individual or group workouts, are very popular. In line with the worldwide trend, there is a growing expectation for fitness workouts to be reachable as simple as possible, in as many forms as possible, regardless of the location. The aim of our study is therefore to map the prevalence of online training among trainers working in the fitness sector. There is a significant demand for such workouts, even if it cannot completely replace hours of personal presence. In addition, as well as for target groups who want to find a form of exercise that can be performed anywhere, anytime, the online space provides an ideal opportunity to practice regular physical activity, as well as a good opportunity for coaches to expand their clientele and services.
-
Parameter Estimation of Drag Coefficient and Rolling Resistance of Vehicles Based on GPS Speed Data
109-115Views:169In this paper, a parameter estimation method of the model-based design approach is applied to estimate the drag coefficient and the rolling resistance coefficient of a vehicle. In fact, a constant-force parameter (c_const) and a velocity-square-force parameter (c_square) are in the vehicle model, and these result in the sum force applied along the translational DOF that models the vehicle. It is only an assumption that the constant force is the rolling resistance and the force proportional to the square of the velocity is the drag force of the air. Only GPS speed data is used for the estimation process. The conclusion is that parameter estimation is a good alternative when expensive measurement devices are not available to measure the force losses separately and directly.
-
Modern Slavery Policies in a Conceptual Perspective
30-35Views:342Most of the people assume modern slavery end up in 19th century. However, according to the International Labor Organization (ILO), today 40 million people live as a slave. Moreover, modern slavery is the world’s fastest growing crime and has huge number, which never occurred in history before. One of the main limitation of the existing literature on contemporary slavery is that it ignores the history of slavery either entirely or alternatively between past and present. However, this article aims to figure out the role of modern slavery, also recommends some suggestions to governments to solve the problem of it. The aim of this paper is to addressing to the modern slavery policies in a conceptual perspective. In the theoretical framework of modern slavery, rational choice theory, conflict theory and human security theory have been selected to describe the sequence of modern slavery.
-
Menedzsment szakos hallgatók a munkaerőpiacon: az elhelyezkedés mintázatai
1-14Views:140The present study analyses the labour market career of graduates from three management majors. Majors in connection with the economic and engineering educational field (economy and management, engineering manager, human resources manager) belong to the average and in numerous aspects to the good status majors and professions. The social recrutation of the majors analysed is middleclass. According to their labour market success, such as the duration of finding a job, the level of employment and income they are among professions of favourable position. The knowledge gained at university may be considered well usable in their work. Their satisfaction with the different components of their work is similar to other university graduates, they are most satisfied with the content of their work, and less with its prestige and possible income.In this study we analyse 2011 and 2012 databases of the Graduate Tracking System.
-
Component Development Using Topological Methods
54-62Views:95The article aims to briefly summarize the design aids which can be used nowadays, such as topology optimization and generative design, which are common in integrated CAD systems. A case study is used to present the results and comparisons provided by the previously mentioned methods.
-
Investigation of Zeta Potential of Water Based Nanomagnetite-Bentonite Dispersions
54-66Views:145The stability of different type nanomaterials play an important role among recent scientific and industrial
challenges, including the examination of the effect of polymers, surfactants and their mixture on surface and electric surface properties and aggregation extent of dispersed particles, which are of utmost importance. Bentonite and its composite with different nanomaterials are frequently used for instance in environmental protection for wastewater treatment, since due to their great specific surface area they have excellent sorption properties. There are several publications in the literature for the application of bentonite in drilling muds. By using them the fluid loss can be decreased during the drilling process, the filtration of the fluid can be increased, it also improves the rheological properties and the formation damage can also be mitigated. During research the investigation and the analysis of the zeta-potential of nanoparticles and their composites at different pH and salt content can be an interesting topic. During our experiments the electric surface properties of nanomagnetite synthetized in laboratory (NM), cation
exchanged bentonite from Mád (Be) and the composite particles of these particles were investigated. Hybrid particles of different compositions (9:1, 7:3, 1:1, 3:7, 1:9) were analyzed at different potassium chloride concentrations (0.1 – 0.0001 M). The surface adsorption on the surface, i.e. the change in the surface charge can be traced well by analyzing the obtained zeta-potential values. The behavior of such systems was observed in the full pH interval, thus, valuable data were obtained regarding the colloidal stability. As for the stability, different requirements may emerge in practice, there are application fields where the colloidally stable system is advantageous, on the other hand, in some cases, ceasing the stabile system is the goal. Our investigations are of high importance in terms of stability and its characterization. -
Project Risks and Risky Projects
164-189Views:354Projects are key drivers of organizational change, both their failure and success can have significant impact on the organizational performance. Risks may arise throughout the entire project life cycle. Managing these and initial project planning uncertainties is an important task of Project Management. The study describes the application of traditional project management tools and methods in risk analysis, -evaluation and -treatment based on modern project and risk management standards and recommendations. The authors also examine the link between classic project management objectives (project time - resources – scopes) and risk-based decision-making. The different scale and scope of projects call for different responses to the associated risks. The study highlights the possible role of the ISO 31000 risk management standard package in project risk management. The authors analyse the risk management of the different projects on the basis of processing relevant literature, including the relationship of the project stakeholders to the risks. R&D, agile projects and project portfolios have specific and complex risk exposures, but their project management can provide several „hidden” risk analysis and - treatment functions.
