Search
Search Results
-
Discussion on São Paulo Mobility Plans
17-33Views:138Since urbanization rising and urban demographic increase, urban transportation has been an important life quality aspect and a strategic decision for cities. Mobility seems to follow citizens' behavior and be influenced by urban cultural changes at the same pace it influences back the city routine and resident’s conduct. The discussion around the future of mobility gained new magnitude nowadays since some sort of vehicles have proved themselves as the cause of significant environmental impact, while others showed themselves as alternatives of low impact for different reasons – from quality public transportation to individual transport with minimized emissions. The city of São Paulo in Brazil published its Master Plan in 2014 and its Mobility Plan in 2015, analyzing the current situation and proposing a future for the city’s transportation system. This paper intends to analyze both plans, construe the popular participation in their formulation and application, discuss how data and strategy were presented and whether they are aligned with other countries’ thinking on the subject. As a city of over 10 million inhabitants, in a Metropolitan Region of 39 cities with over 20 million inhabitants, the transportation system of São Paulo is not an easy or single-solution issue. It is known the need for a combination of different transportation modes, requiring likewise new visions for all methods. Owing to the fact that modes complete each other and, in that manner, may reach a wider range of options for the population to plan daily life, then a system with a great variety of modes ensures the best functioning of them all. This paper focuses on an outsider view that searches for answers and solutions on the São Paulo transportation system, having as a base what is considered outstanding in the world for this issue.
-
Structural Analysis of Carbon Fiber-reinforced Thermoset Composite
36-46Views:163Materials are usually stronger in fibrous form than in bulk form. Composites are made from bonding two materials, where the reinforcement contributes with the outstanding natural properties and the matrix supports the fibers by transferring the loads between them, besides protecting the fiber from the environment hazards. Consequently, creating a strong composite that can be used in various applications and situations. In this academic work it is going to be analyzed how the composite made from carbon fiber and epoxy thermoset matrix behaves in specific situations, by making them in two different manufacturing methods. In addition, the analysis is going to be made in the laboratories of the university and then compared with computer analysis. So, the first phase of this academic work is being presented and highlighted below.
-
Analysis of Conceptual Solutions of Universal Helical Geared Reducers
64-72Views:126Geared reducers are mechanisms designed to reduce the number of revolutions using geared elements and nowadays they present one of the most commonly used types of mechanical transmissions in mechanical engineering. Due to the different shapes of geared elements, there are different types of geared transmissions: helical, bevel, worm, special and combined transmissions. This paper analyses only helical geared transmissions, since there is a great extent of whole this matter. Helical transmissions are analysed only with external helical gearing, since internal geared pairs represent a special and very large group of gears. Within the external helical geared transmissions, only torque transmissions are analysed, while the transmissions of motion are not analysed and they represent another large group of transmissions. Only universal gear reducers with axial, or almost-axial, parallel shafts are considered (two-stage and three-stage transmissions). Although, single-stage gear reducer produced with parallel shafts are not considered by the paper in order to reduce the area of researching. Gear reducers are most commonly delivered to customer with electric motor, known as motor geared reducer, and they are studied here extensively. Gear reducer can be also delivered without motor, only with input shaft. The basic aim of this paper is to present all characteristics and specificities of motor geared reducer in one place.
-
The characteristics of civil organisations for sports with special regards to employment
701-711Views:396The aim of our article to compare the characteristics of the civil organisations operating in Hugary and in Romaina with special regards to the employment characteristics of the sport civil associations. We ascertained during our research work that the civil sector of the two investigated countries show several similarities. One of these similarities is the lag from the same sectors operating is Western-European countries. The use of volunteer working is a main characteristic of the employment in the civil sector however the paid work plays an important role too.
-
A Literature Review: Artificial Intelligence Impact on the Recruitment Process
108-119Views:9641This paper aim is to review the implementation of artificial intelligence (AI) in the Human Resources Management (HRM) recruitment processes. A systematic review was adopted in which academic papers, magazine articles as well as high rated websites with related fields were checked. The findings of this study should contribute to the general understanding of the impact of AI on the HRM recruitment process. It was impossible to track and cover all topics related to the subject. However, the research methodology used seems to be reasonable and acceptable as it covers a good number of articles which are related to the core subject area. The results and findings were almost clear that using AI is advantages in the area of recruitment as technology can serve best in this area. Moreover, time, efforts, and boring daily tasks are transformed to be computerized which makes a good space for humans to focus on more important subjects related to boosting performance and development. Acquiring automation and cognitive insights as well as cognitive engagement in the recruitment process would make it possible for systems to work similarly to the human brain in terms of data analysis and the ability to build an effective systematic engagement to process the data in an unbiased, efficient and fast way.
-
Production of Liquid Hydrocarbons from Plastic Wastes
345-350Views:114Thermal pyrolysis of HDPE, LDPE, PP and PS plastic wastes were performed in a batch reactor and the yields of pyrolysis oils and liquid transportation fuels prepared by atmospheric distillation were determined. The gasoline fractions were tested in a traditional spark-ignition engine without any modifications or fuel blending. Fuel consumption and exhaust gas emission (NOx, CO) were measured and compared to a commercial fuel (RON = 95). PS generated 70.5% gasoline range hydrocarbons from the solid waste, followed by PP with 42.1%, LDPE with 40.8% and HDPE with 37.3%. The fuel consumption was reduced by 9.1-9.4% in the case of PS compared to reference measurement. Reduction in fuel consumption was noticeable at HDPE, LDPE and PP as well. PS gasoline decreased by 91-96%, while HDPE, LDPE and PP more likely increased the CO emission of the engine compared to commercial gasoline. The results show that pyrolysis of plastic wastes is a promising method to generate value added liquid transportation fuels and reduce the footprint of waste accumulation in landfills.
-
Tools to Develop End-User Programming Skills from Primary School to Higher Education
30-40Views:104Some years ago at the MIDK2013 Conference [16] we presented a concept regarding the use of a new generation of computer programming novice languages (in fact, an environment, called ‘block languages’). We showed how we imagine the use of this kind of language for different ages and at different levels of education. Now we would like to present the results of our projects related to this concept and our psychological and pedagogical experiences. Furthermore we would like to present further tools to develop end-user programming skills from primary school to higher education.
-
Survey of the Service Offer of Fitness Clubs for Group Classes in Debrecen
35-48Views:264The economic and social importance of the fitness sector is steadily increasing. The range of services provided by fitness centers is expanding and the popularity of fitness clubs is constantly growing. Fitness workouts are easily accessible for everyone, and there are numerous types of fitness centers which can play an important role in everyday physical activity. There are many factors that can influence the choice of fitness consumers for the gym, also fitness professionals play a key role in this regard. It is essential for fitness clubs in order to remain competitive on the market, to employ fitness instructors with the optimal personality and expertise, but in many cases, there is a lack of verification of qualifications. In our study, we conducted interviews with 20 fitness instructors who work in a fitness center that offers group lessons to consumers. The questionnaire included questions about consumer preferences, fitness facilities, trainers qualifications, and activities. Our study was made among eleven fitness clubs in Debrecen. The number of fitness clubs is constantly changing, with each year closing, opening or rebuilding fitness centers, which vary widely in size and number of services offered. The majority of respondent trainers are women as are the participants women in group lessons. Most of the interviewed trainers have OKJ qualifications, but the results reflect that fitness providers have not checked their qualifications at all before applying them. Fitness professionals play an extremely important role in leisure sports, contributing in maintainance and development of the fitness consumers’s health. Their work has a particular responsibility, as they can influence the physical and mental health of others in both positive and negative ways. Not only to avoid the risk of injuries, but also to prevent long-term health damage, fitness professionals play an important role. Controlling the qualifications also be in the interest of fitness clubs, not only avoiding accidents, but also increasing attendance at group classes by employing reliable, excellent personal trainers.
-
Study on Learning Motivation of Master's Students in Management and Leadership at the University of Debrecen
69-79Views:110The aim of our study is to present the topic of adult learning. To do this, we first define the definitions and importance of learning in a person’s life. We then turn to the historical background and evolution of adult learning. The motivation of adult learning as a function of different motivational theories is presented. In the second half of the study, an initial research focusing on the motivation of adult learning is presented. The subjects of our research are young adults who are pursuing their master's degree in management and organization at the Faculty of Economics of the University of Debrecen. We want answers to the extent to which different factors motivate young adults in studying. With the results, we want to give an idea of how the learning motivation of the students can be characterized by both lecturers and human resource professionals working in the private sector. We intend to expand the research to a larger sample in the future.
-
An Analysis of the Leisure Preference System of Students with Disabilities in the Light of a Study
98-115Views:647With the increase in the number of disabled people and people with disabilities, research on the target group of people with disabilities has gained momentum in recent decades. Research is very diverse, looking at the labor market situation of people with disabilities, their leisure-time habits, or the factors that support and inhibit their sport.
In our questionnaire research, the leisure and sporting habits of children with disabilities aged 8-18 are described and analyzed (N = 639). Data were processed with spss software, where basic statistics and contextual analysis were performed. The results confirm that passive activities (TV, listening to music) dominate the leisure activities of children with disabilities. Sports consumption (active and passive) was more prevalent among male respondents and less prominent among girls. In the motivation of sports, besides improving the state of health, entertainment and company appeared.
-
Solid-Lattice Stem Optimization Design for Hip Implants
39-46Views:383The goal of this study is analyzed and design a methodology to reduce stem mass, through topology and lattice optimization of a Ti-6Al-4V hip implant, meeting yield stress requirements. Four optimization cases were studied: Topology optimization (1), Lattice design 100% (2), Lattice design 50% (3), Lattice design 25% (4). Five load cases from a study were applied for each optimization cases: Combined (LC1), standing-up (LC2), standing (LC3), going up stairs (LC4), jogging (LC5). The optimized cases design reduced stem mass approximately by 30% (1), 5% (2) ,8% (3) and 2% (4), compared with the total stem hip Ti-6Al-4V implant.
-
Industrialization of knowledge in the University of Miskolc
61-73Views:174Life of universities has transformed thanks to “massification”. The costs of education have increased and universities had to manage a higher number of people. The economic management has moved towards business-like operation. The university has been transformed into an entrepreneurial university, while science has become knowledge production. The scientific policy has started to serve the needs of industrial corporations. The article titled (Industrialization of knowledge) introduces the research, developments, and innovations of the University of Miskolc. The university participate in national and international projects and they use the benefits of the research in developments. As the participants of innovations, they help in the introduction of new technical developments and the preparation of new products. Their operational experience is important for everybody.
-
Business Process Development with the Application of Simulation Technique
109-118Views:122The object of our work to increase production efficiency with the use of cost-efficient development tools at a Hungarian small enterprise. We apply data gathering techniques besides process modelling and diagnostic methods to reduce the total process time of the assembly process so as to induce cost reduction in the production. In this respect we investigate and rank root causes of wastes by cost-effective process development tools, like timebased FMEA (failure mode and effects analysis) as well as the 5 whys method. With the use of Monte-Carlo simulation companies can evaluate the change in the process, therefore, they can decide whether they want to carry out corrective measures or not. The accomplished changes can generate increasing competitive edge in the long run.
-
Creativity and Innovation to Improve Processes in a Textile Industry
80-96Views:128In this scientific work, the My Creative Idea (MIC) program was created and developed in the Coteminas S.A. textile industry, distributed among the organization's units in the country with emphasis on the São Gonçalo do Amarante unit in the state of Rio Grande do Norte. The aim was to critically analyze the improvements of industrial-scale processes resulting from the creativity and innovation intrinsically incorporated and experienced daily in the program. Thus, the general objective of the work was to evaluate the improvements in the productive processes coming from an innovation program in a textile industry, considering as specific propositions with respect to calculating the gains with reduction of losses, cost of implementation of ideas and measure financial returns and evaluate employee satisfaction according to the program. Moreover, there was free access in the company to be able to collect valuable information that could formalize a robust database for later structuring of the document, as well as the application of action research in the form of questionnaires. Therefore, the results verified clarified and emphasized the program's aggregating character to the organization in a general way under aspects that approach the financial spheres, the quality, and the satisfaction and motivation of the employees involved in this whole scenario. I suggest continuing to work on a continuous improvement methodology to further enhance My Creative Idea over the years, as well as insert this method of work to units that have not incorporated this program into their business strategies.
-
Trends in Greenhouse Gas Emissions and Renewable Energy Policies in the EU and USA, with Special Emphasis on the Transportation Sector
219-231Views:238The aim of this work is to review recent trends in the field of greenhouse gas (GHG) emissions and renewable energy policies of the European Union and the United States of America. During the last few decades, there was a significant shift within the political attitude towards these fields, therefore important changes were realized in the electricity production and the climate policy. In the present paper, we discuss the current situation focusing on the transportation segment.
-
Operational Feasibility Assessment of Geothermal Heat Harnessing Systems
46-53Views:130Renewable energy sources are now essential to establish sustainable development. This paper examines one kind of source the geothermal energy. For geothermal energy when combined with a heat pump COP can be used for evaluation. For solely geothermal sources different approach is needed thus in the paper, a new geothermal heat production coefficient is used to examine the operational feasibility. For the assessment, many hypothetical buildings were created to model their heat demands. Two types of calculation methods are used for heat demand calculation. Based on the results, the maximum depth of a geothermal borehole and economically critical qualitative coefficient was concluded.
-
Changes in the Financial Condition of Families in Hungary between 2000 and 2019
712-722Views:225The financial condition of families living on wages is function of many factors. It is determined, among other things, by the development of wages, social benefits, tax rates and the amount of allowances that can be granted. The part of the tax system that affects the largest segment of individuals changes every year, and even during the year, reducing predictability. In recent years, discussions over the taxes have shown that the rate of personal income tax cannot be evaluated separately from the social security contribution rate. Gross average earnings - on the grounds of raising the minimum wage and the guaranteed minimum wage - have more than four-times in nearly 20 years. However the rate of growth is higher in the average net earnings due to changes in the tax system. Compulsory determined wages increased to almost six-times over the years under investigated. But in 20 years, how much has the income situation of an average family living on a salary become more favourable or more unfavourable? In our study we are looking for an answer to how the increase in the minimum wage and the changes in the law how to have affected the livelihood.
-
Numerical Modelling and Simulation of Sheet Metal Forming Process
1-6.Views:117Simulation and modelling of sheet metal forming process are well common today in different industries (automotive, aerospace) and several research centers regarding its huge impact for both on production and reliability of the lifecycle of the equipment, and the quality of the product. However, to obtain the best configuration possible with the inputs parameters to achieve high level of production and increasing the durability of the tools needs some extra methods for the optimization for this problem using mostly finite element method cooperated with iterative algorithms based on Artificial Neural Network (ANN) [1]. Whereas this research is focused on modelling of stamping process of stainless steel AISI 304 to investigate to formability of the material, and studying the influence of the friction factor on the quality of the product as well the energy required for each set configuration.
-
Optimizing the combustion processes of a small scale solid fuel-fired boiler
358-369Views:121Over the last decade, the public has been paying increasing attention to reducing greenhouse gas and acid rain emissions and reducing particulate matter, which is extremely harmful to health and the environment. To improve air quality, the European Commission has achieved a range of measures to reduce air pollutant emissions in the transport, heat and electricity, industrial and agricultural sectors. In Hungary, the amount of gas and solid air pollutants from solid fuel combustion used by the public during the heating season represents a significant percentage of the total amount present in the atmosphere. In 2016, taking into the total emission, the 29% of CO2 emissions; 85% of CO emissions; 75% of the particulate matter emissions and 21% of the NOx emissions were derived from households. It follows that the improvement of air quality can also be achieved by controlling the emissions of solid fuel combustion plants. During our research we aimed to optimize the operation of a newly purchased TOTYA S18 boiler and a pilot pellet boiler. Operating the boilers in the correct mode minimizes air pollutant emissions, and the greater part of the heat generated is actually turns to heating the home, as with poor settings, a lot of heat leaves through the chimney. The data obtained during the tests can also be used to determine whether the boilers comply with the emission values set out in Commission Regulation (EU) 2015/1185.
-
Using the Photostress Method to Determine the Residual Stresses
24-38Views:133Strains and stresses in loaded and photoelastically coated structural members can be determined using the PhotoStress method. The quantitative values of variations in the principal strains (stresses) and their directions could be employed to get the strain or stress components field on the entire coated surface. In the PhotoStress experiment, isochromatic fringes give qualitative and quantitative information. It provides a source of information on the directions and magnitudes of principal strain and principal normal stress on the surface of photoelastic coated parts. This article reviews the principle of using PhotoStress analysis to measure the residual stress and provides the boundary condition of using this method.
-
COVID-19 Pandemic Impact on Employees’ Physical Activity
72-84Views:755Globalization and the recent explosive development of technology have significantly changed people’s lifestyles resulting in an increase in the number of people living a sedentary lifestyle. COVID-19 pandemic has exacerbated the situation and created an unprecedented situation in the world. In the present study, we investigate changes in the physical activity and sedentary behavior of adult workers caused by the coronavirus epidemic. In our online cross-sectional research, we used snowball methodology. The target group of the survey was adult workers. 108 people filled in the questionnaire, the majority (73.1%) are women, the average age is 37.18 years and most of them have higher degrees (Diploma: 74%, PhD: 14%). The present study revealed a decrease in physical activity and an increase in sedentary time for the employees in our study. Despite respondents detected a decrease in their physical activity, an increase was reported in the proportion of online training participants. The majority of respondents partially, or totally switched to work from home during the pandemic, which may further increase their sedentary lifestyle. We did not find significant differences among the domain of work and leisure time or occupational physical activity patterns. The workplace is a great opportunity for promoting physical activity and reducing sedentary time in the adult working population, therefore it would be important for organizations, decision-makers and health professionals to work on the design of strategies to these goals.
-
The Measurement of The Three Components of The Cutting Force During The Turning Process
139-146Views:97We carried out the measurement of the three components of the cutting force as a function of the modification of the depth of cut during the longitudinal turning process. The results show that if we increase the depth of cut, all three components of the cutting force shows increasing tendency, regardless of how much the cutting speed and feed speed were performed during the measurements [1] [2] [3] [4].
-
Analysis of Activity Times in the Process of a Wooden Box Manufacturing
475-484Views:113The main target of companies is to earn money and achieve profit. In order to fulfil these needs, companies have to reduce their costs. Cost reduction is often associated with bad quality products, but it could be done in a different way. Sometimes it is enough to examine only their own processes and then benefit from the process optimization, process improvement or process scheduling. In this article a case study is presented, in which the differences in a production scheduling are evaluated with the application of Monte-Carlo simulation and descriptive statistics. At the end of the paper the most efficient material sequence is selected at the manufacturing company by using weighted sum model
-
Mechanical Testing of 3D Metal Printed Stainless Steel Specimens
7-13.Views:90Additive manufacturing (AM) is a cutting-edge production method, which has come a long way since its first introduction in the ’80s. Back in the days its usage was very limited to stereolithography, and was only able to make weak structures, so it only worked for visualization. Four decades later it is one of the leading research fields in production areas, because of its flexibility and its ability to make almost any complex geometry. However, no matter how powerful it is, it is not omnipotent, there are certain size and shape restrictions even this method must apply to.
-
Potentiodynamic Study of the Effects of Nickel on The Electrodeposition of Zinc from Chloride Media
15-24Views:106Abstract. The potentiodynamic experiments of the nickel effects on the zinc electrodeposition have been done to understand the impact of Ni impurities on the electrowinning of Zn from spent pickling liquor. The nickel chloride solutions of Ni concentrations 90 and 1 g/dm3 were used as the electrolytes. The latter was also mixed with 90 g/dm3 Zn in the experiments. All the runs were carried out at room temperature with 40 mV/s continuous polarization speed and with 1/s sampling rate. It was observed that nickel electrodeposition from chloride media containing 90 g/dm3 Ni started with the generation of hydrogen bubbles, entirely blocking the cathode surface. Only a slight current development was observed until the polarization potential ~ -0,8 V. The visual observation showed bubbles also formed at the anode, which may represent chlorine and/or oxygen evolution. While, in the electrodeposition of nickel with only 1 g/dm3 Ni concentration in the electrolyte, metal deposition was hardly observed, but visible hydrogen bubbles constantly blocked the cathode surface. A similar tendency was observed in the mixed-solution electrolysis cell; the initial tiny bubbles accumulated at the cathode surface more than in the pure Zn solution. The enhancement of H2 evolution indicates how nickel deposition may contribute to the loss of useful current in the process of Zn electrodeposition. The mass of nickel deposited from the mixed solutions significantly decreases as the Ni concentration decreases in the electrolyte, while the mass of deposited zinc is relatively constant. It means that the purity of the produced Zn is appreciably higher – with respect to Ni – if nickel is efficiently eliminated from the solution before electrowinning.
