Search
Search Results
-
Investigation of application and development of precision irrigation technology
239-248Views:250Due to the extreme weather conditions irrigation is nowadays considered an increasingly necessary factor. After evaluating the water requirements of the plant and the available water resources is necessary to decide what irrigation method to use. One of the most commonly used methods in field conditions is rain-type irrigation, of which there are several types (eg linear, winding drum). The uniformity of the field nozzles can be characterized by the Christiansen uniformity factor (CU%) and the distribution uniformity factor (DU%). The coefficients can be derived from the volume of water captured by the rain gauges. Our investigations were carried out in July and August 2019 at the University of Debrecen's Vision Plant Experimental Plant and at a linear irrigation equipment of a Nyírbátor company. The aim of the study was to compare the uniformity of water dispersion applied by conventional linear technology and precision linear irrigation technology. In addition we examined the intercept values of maize.
-
Optimization of the Sheet Metal Base of a Toggle Clamp Using Finite Element Method
266-273Views:221Optimization relates to the ultimate yield strength and the maximum stress incident on the current model under critical working conditions and finds through iterative processing a way to compensate for the strength requirement without going beyond the desired mass limits. In this paper, the horizontal sheet metal base of a horizontal toggle clamp is optimised for mass reduction using the finite element analysis in the computer aided design software. The sheet metal base material is the ANSI32 Steel. In the design software, it is designed with the thickness of 7 mm and it is intended to support a workload of up to 750 N. The constraints were a fixed point added at all the holes and at the bottom surface of the sheet metal base. A number of iterations were made for the 750N loading force across the base plate to run the simulation. For optimization, the aim was to minimize the mass of the base plate. The design parameters were Von Mises, factor of safety and displacement. The variables were the slots’ width and material thickness along the mid-surface of the sheet metal. The mass was reduced by more than thirty per cent overall.
-
Practical Application of Methods in Strategy-Based Analyzes
59-72Views:484Increasing environmental volatility is a growing challenge for companies and businesses. The speed of economic events is changing, and the risk of uncertainty is increasing, requiring business to take a new approach to strategic planning. In the design and forming of their strategy, both the factors of the external and internal environment and the analysis of their competitors can be based on well-chosen methods. We consider the review of these methods, their application in planning and educational practice. The aim of our work, in which we present the methods that underpin the strategy applied in both domestic and international practice. The analysis of the external environment illustrates the construction and applicability of an external factor analysis matrix based on traditional PEST analysis and the Porter's five-factor model. In the case of internal factor analysis matrix, we focus on the approach of method choice, and on the applicable methods, the importance of the resource-based approach, the analysis of key factors and the Porter value chain analysis matrix. The third pillar of the analysis that underpins the strategy is the matrix-based assessment of competitors. The applicability of the methods depends on the form of the enterprise, the field of activity and the nature of its activities, which is complicated by the emergence of new economic spheres (e.g.: sharing) and transformed power relations.
-
Transformation of the Decisional Leadership Role
26-40Views:115Leadership decision-making is important for the successful functioning of organizations, so it is necessary for leaders to understand the factors that impact their decisions. Decision-making is always the responsibility of the leader, but in a changing world, it becomes an even more crucial factor for success. Making good decisions requires time, experience, and thorough problem-solving skills. In my research, through the analysis of scholarly sources, I have identified several role factors that clearly influence the decision-making process and its implementation. Furthermore, I have developed a self-designed questionnaire to examine the decision-making role in modern organizations. I analyzed the data from 230 respondents using various statistical methods. Based on my findings, conflict management, risk-taking, and a thorough understanding of the problem strongly determine leadership decision-making processes. The ability of leaders to effectively manage conflicts significantly impacts their decisions. Risk-taking is also of key importance, as leaders need to recognize the risks associated with a given situation and make decisions accordingly.
-
Direct Optimization of an Automotive Sheet Metal Part Using ANSYS
134-142Views:443Optimization of automotive parts nowadays is mainly used to design lightweight and cost-effective vehicle parts in order to improve the cost and efficiency. In this research, a sheet metal part was taken into consideration and optimized using direct optimization module in ANSYS to evaluate the process. An initial Finite Element Analysis (FEA) was done on the sheet metal part by adding forces and constraints in order to initiate direct optimization. The purpose of the optimization is to minimize the mass of the sheet metal part and maintaining a certain Factor of Safety (FOS) by automatically modifying the sheet thickness and the dimension of the side holes. As a result, the best candidate point with 23% mass reduction was found which complied with FOS value was selected for optimal geometry.
-
Mixing Power Requirement Determination in Agitated Drum Using Dimensional Analysis
76-88Views:170The mixing of granular materials in an agitated drum can be characterized by the dimensionless power equation. The equation was created by dimensional analysis, for which the parameters affecting the mixing power requirement were collected based on the literature. The most important of these are the rotational speed, the drum loading factor, the geometric and physical properties of the mixing drum and the granular materials. The dimensionless power equation is used to estimate with reasonable accuracy the Power number within the given range of applicability , which has been validated by measurements. From the Power number, the mixing power requirement of the mixed granular material can be calculated, which can be used as operational data for selecting the mixing motor.
-
Numerical Modelling and Simulation of Sheet Metal Forming Process
1-6.Views:163Simulation and modelling of sheet metal forming process are well common today in different industries (automotive, aerospace) and several research centers regarding its huge impact for both on production and reliability of the lifecycle of the equipment, and the quality of the product. However, to obtain the best configuration possible with the inputs parameters to achieve high level of production and increasing the durability of the tools needs some extra methods for the optimization for this problem using mostly finite element method cooperated with iterative algorithms based on Artificial Neural Network (ANN) [1]. Whereas this research is focused on modelling of stamping process of stainless steel AISI 304 to investigate to formability of the material, and studying the influence of the friction factor on the quality of the product as well the energy required for each set configuration.
-
Enhancing Customer Experience in Car Servicing: Insights from Indian Markets
113-123Views:101This descriptive research has attempted to assess customers' satisfaction with services offered by car servicing firms in India. The researcher administered a structured questionnaire to 300 company customers, selected using the Systematic Random Sampling technique. Data collected were analyzed using SPSS, applying the analytical tools of Frequency, Percentage, Mean, factor analysis, cluster analysis, Chi-square and Correspondence Analysis. Results of the study have revealed that the caring nature of servicing staff, the quality of services and service personnel, and the convenience and comfort offered to customers have been identified as the most important factors affecting customer satisfaction.
-
Safety Index Based on Geometric Probability Is Proposed to Represent the Uncertainty of Soil Parameters for Spread Foundations
43-52Views:140The overall factor of safety in geotechnics can be defined as the product of four partial factors of safety. One of these partial factors represents the uncertainty of the soil parameters. Based on geometric probability, a safety index is proposed to calculate the uncertainty of the soil parameters for spread foundations. Numerical examples have also been presented.
-
Numerical analysis of effects of an open-pit coal mine to groundwater
70-74Views:123In this study we investigated the hydrogeological problems of an open-pit brown coal mine in the Borsod coal basin with Processing Modflow software. The coal mine is located in the valley of the Sajó-river with high transmissivity overburden layer where the traditional dewatering solutions were not encouraging due to inrush risks and low cost-efficiency. A new way of barrier forming was found out and numerically simulated to prove the efficiency of the solution. Since there are several contaminated sites in the surroundings it was a key factor to assure that the new mine dewatering technique has only a negligible effect on the groundwater regime that undisturbs the known contaminant plumes nearby.
-
„Forradalmi” változások a menedzsment területén
1-15Views:161Development of the Science and practical application of the results created big changes in the nontradicional areas too. The „Health industry” was developed. The results of the physics, chemistry, biology and mikroelektronics etc. helped to develop some new methods of diagnosis, operation etc. The „money industry” was developed too. Our opinion is, that the most important cause of the economic crisis is a non regulated well of the „money industry”. The „knowledge industry” was developed too. The „knowledge industry” contains all level of teaching and Research + Development + Innovation. Our analyze shows that the Innovation is the most important factor of the economic Development of Society. The new scientific results created big changes in area of the Management. The „Management Science” was developed as an independent area. Some management specialists developed some management methods (eg. Value Analysis, Risk Management, TRIZ, Lean methods etc.) for efficient allocation of sources.
-
Requirements for Multicultural Competencies Defined by a Focus Group
44-56Views:217Globalization, the spread of multinational companies and the enormous development of information technology can lead to a new trend in employers’ requirements. However, being employed by an international company is a real possibility for any employee in any part of the world. Even if they do not have to work abroad, employees may have to function in a multinational environment in their home countries. A favourable combination of intercultural competencies is a key factor in the selection and development of employees. A possible way of measuring these competencies can be the Multicultural Personality Questionnaire (MPQ). First of all,on the employers’ part, it is important to clarify the exact requirements and competencies (dimensions) to be able to draw up an ‘ideal profile’. We prepared two versions of the MPQ (91-item; 5-dimensional) and used them to test employers’ requirements in the selection process regarding the dimensions of cultural empathy, open-mindedness, social initiative, emotional stability and flexibility. This study describes the results of a focus group interview, which took place in 2017, revealing the importance of multicultural competencies from the employers’ point of view and examining the conditions of the adaptability of the two questionnaires. We used the focus group method to find out in what conditions the questionnaires canbe used in a selection process. What possibilities and limits are therefor using the direct five-dimensional questionnaire? What aspects do we need to take into consideration in expressing and interpreting the requirements in the results of the test?
-
Entrepreneurial Climate – Management of Women's Entrepreneurship
69-74Views:92Entrepreneurship, which people can have without formal economic education, is a tendency acquired through upbringing in the family, competition in school, implies risk and constant self-affirmation through the acquisition of profits and losses, so that it represents the sum of successes and failures, victory and defeat. In the last thirty years, female entrepreneurship has been developing more and more, especially in less developed countries, the reason for such growth is primarily reflected in the promotion of equality between men and women, the right to education, and the development of democracy. Female entrepreneurship is a significant factor in economic development, so the national economy becomes richer. The subject of this research are the entrepreneurial climate in the Balkans compared to the world in terms of female entrepreneurship, what is the role of the family in starting a small business, as well as its survival and growth. In the study the results of previous research in this area. The research method is based on a comparative analysis of studies dealing with this problem from the territory of Balkans. It can be concluded that in the Balkans, female entrepreneurship is still in its infancy, it is about a very small percentage of female entrepreneurs, although according to research, it is evident that there has been no major progress in the last 15 years. Recommendation In the countries of the Balkans, there is a good entrepreneurial climate for the development of female entrepreneurship, especially because women can work from home, and in the future it is necessary to go in this direction.
-
The significance of analysing potential conflicts in the sales-marketing integration
41-59Views:146Our research aims to identify the critical interfaces between sales and marketing that need to be improved in order to ensure productive cooperation. The relationship between the two departments is full of conflicts and interdependencies. The improvement of communication is of strategical importance, as it is key to staying competitive in the market. The effectiveness and quality of the sales-marketing cooperation is a key factor that is negatively affected by personal and organisational factors as well as a lack of information and conflicts. In addition to the key factors of managing the sales-marketing interfaces, we have also identified the actions that can promote their improvement, including strategic and organisational roles and responsibilities. Our empirical research results show that regular information exchange, more common and interdisciplinary meetings, and a clearly communicated and implemented corporate vision have a positive effect on the coordination and integration of the sales and marketing departments. Consequently, management is reponsible for establishing a corporate vision, i.e. a comprehensive management culture that is clearly communicated across the board in order to increase the employees’ sense of belonging. Of all elements of management culture, the most important factors are coordination and the establishment of a common strategic sysyem. All in all, corporate profit, which is of key importance to the employer, is largely dependent on the successful integration of the sales and marketing departments, which can be achieved through the implementation of the above factors.
-
Introduction to Design and Analysis of Torsional Vibration Dampers in Vehicle Industry
310-324Views:343The crankshaft of today’s internal combustion engines with high performance output are exposed to harmful torsional oscillations originated from the unbalanced gas and inertial forces. To avoid the fatigue damage of engine components, caused by the undesired vibrations, torsional vibration dampers can be applied. Viscodampers are one type of the torsional vibration dampers, which operational fluid is silicone oil. For cost-effective R&D activities and production, finite element and finite volume numerical discretization methods based calculation techniques must be involved into the engineering work supported by the modern computer technology. The aim of this paper is to provide an insight into the multidisciplinary design and development process of visco-dampers in vehicle industry applications. Four different examples as structural, fatigue, CFD analyses and structural optimization have been introduced in the present work. It turned out from the static structural and fatigue analyses, that the investigated damper has safety factor over the limit for both static structural and fatigue analyses, so it is suitable for the given load conditions. In the structural optimization process 34.36% mass reduction has been achieved. According to the coupled fluid dynamic and heat transfer simulations a rather stagnating air zone evolved between the engine and the damper during the operation, which can cause efficiency reduction of cooling fins mounted onto the housing. In light of the numerical results, the suitable damper position has been determined for the highest heat transfer.
-
Digitalization Process by Agricultural Companies, or the Results of a Questionnaire Survey
625-636Views:261The term “information society” first appeared in Japanese social science in the early 1960s (Z. Karvalics, 2007). The interpretation of the concept has undergone significant changes over the past decades, showing that dynamically developing societies, which are undergoing constant changes due to the rapid development of information, information management and the dynamism of the digital world. The close relationship and connection between information and information technology has become a fundamental factor in the societies of today, the organizations life, which generates inevitable, sometimes serious debates and profound changes. Economic operators must necessarily be resilient to technological change. We should think of the time of the Industrial Revolution, when modern weaving machines flooded the factories. Otherwise, a resilient organization will not survive in an evolving and ever-changing dynamic economic environment. Of course, this is true of agriculture as well, just as it is for other sectors of the national economy. On the one hand, my assumption on the basis of which my questionnaire was compiled was that enterprise management systems are increasingly used by enterprises in agriculture due to the diversification of activities. At the same time, I assumed that the size of a business could influence the use of information technology (hereinafter IT), so I hoped that my research would provide reliable data on this as well.
-
Opportunities for Keeping Talent Highlighting Career Needs
31-43Views:447Organizations should focus not only on finding a workforce, but also on finding a talented employee and to be able to keep them. That is why we considered it important to pay attention to talents and careers. In this paper, we attempt to identify those factors which are important for career prospects among future employees and those already in the workforce. Moreover, we want to identify the factors which those who are already employed consider to be factors influencing their career prospects. We conducted a survey of students using questionnaires. 116 questionnaires were completed, of which 73 were filled in by BSc / BA students and 43 by Msc / MA students. We sought to discover to what degree the respondents considered the career factors we presented them with as influencing their ability to acquire an ideal job, as well as to what degree the same career factors would be able to assist them in their future career advancement. Presently, in their roles as students seeking gainful employment, important factors include perseverance, diligence, knowledge, and aptitude, all of which the respondents feel will become even more important in making their later advancement possible. At present, they do not consider the support of companions / partners and morality important; but they consider the support they receive from their colleagues to be a factor which grows in importance over time. In the questionnaire survey of employees, we were looking for two answers. On the one hand, which factors are important in shaping their careers, and on the other hand, at the workplace, which factors were related to employee retention and satisfaction. For their careers, they consider it important to have diligence, morality, and the support of colleagues. These results are similar to the views expressed by the students. However, those who already work consider ‘kissing up to the boss’ to be more important for their advancement possibilities than the students did. The responses concerning factors contributing to successful employee retention brought interesting results. Factors that are most commonly fulfilled, such as a good co-worker relationship and the working relationship with a leader, are barely above the average score of 4, which is actually a result that is above average. Medium results include the realization of independence, challenging work, fair pay and career prospects factors, all of whcih would be vital for talented people to experience flow in their careers. In the long term, leaders and HR professionals need to pay attention to take calculated, equisite steps to keep talented workers.
-
Numerical Model Analysis of Natural Gas Combustion Burners
67-71Views:159Traditional power plants still the dominating power source for all the major industries and powerdemanding facilities, the most crucial facility for the whole plant operations is the industrial boiler which generatessteam, heating energy or electrical power. Boilers generate energy by combustion. The improvement of combustion efficiency could greatly influence the energy consumption and will make the boiler more efficient and cleaner (less emissions), that’s why it is important to understand the combustion and thermal flow behaviours inside the boiler. Beside experimental testing, computational work nowadays becoming more and more important due to lower cost and acceptable accuracy with minimum error. With numerical calculations method, the computational model created by a Computational Fluid Dynamics (CFD) software could reduce a lot of trial and error on experimental work. In this paper utilizing the ANSYS FLUENT 19.1 software to make crate the combustion model. The ratio of air to fuel mixture, the equivalency factor, mass flow rate of the mixture, velocity, mass fractions of the mixture components (fuel and air) and their temperatures will serve as the input parameter while the exhaust gase component mass fraction, temperature, mass flow and velocity will be monitored.
-
Labor market effects of health promotion on human capital
591-602Views:486Today, workplace health promotion is increasingly present, both domestically and internationally. In my research, I used literature analysis to show how workplace health promotion programs, including physical activity, how affect employee earning capacity and productivity. Human capital is a significant factor in productivity. Human capital can be defined, that the human inner, inseparable features and characteristics of a person to which is invested and, as a result, increases the productivity of the individual. Investments can include health spending (health promotion programs), costs of extra-curricular lessons and time to find the ideal job.
I’ve been used secondary data collection during my research. In my research I have reviewed the source of literature on health promotion and physical activity primarily. After reviewing the literature, consequence of the research that investing in health, including investing in physical activity, it also contributes to improving health, as well as increasing life earnings and productivity at work.
-
Experiences of Innovation Projects in the Light of the „European Paradox”
563-578Views:116Corporate innovation can be a major factor in economic development and long-term high-level corporate performance. The position of the EU in international innovation rankings has not improved since the 2000 2009 period; though there has been a more positive trend since 2010, meeting the Lisbon goals, the EU is still not at the forefront in terms of R&D&I. Behind this process is the rapid progress of some industrially developing nations in R&D&I, as well as the relatively slow institutional development of national innovation systems in Europe. The relative lag in Europe can be explained by the frequently referred to “European paradox”, which is still unclear for methodological reasons. Firstly we consider the international ranking in innovation, then discuss one of the explanations put forth to explain this rather weak performance. We present case study that represent Hungarian experiences with corporate innovation.
-
Company Valuation of an Entity Operating in International Accounting Environment
320-331Views:598Company and asset valuation plays a major role nowadays. Determining the company’s value is a key factor for management in appropriate decision making, and it is a necessary step for individuals who wish to invest and for investors. There are numerous models which utilize different methods for company valuation. In our study we based our valuation on the McKinsey model for a company in an international accounting environment. In the study we present the main attributes of the McKinley model, its structure, which includes the main steps of valuation. We put a special emphasis on the calculation of free cash flow, future balance sheets and profit and loss accounts anticipation as well as future turnover, which highly influences the changes of data in the future reports thus in the company value. The McKinsey model is a discounted cash flow model, in which the company value and the consequent future cash flow can be determined as present value.
-
The Efficiency of Intellectual Capital as a Crucial Factor of Innovation
419-428Views:262In today's global economy, there is a substantial shift from manufacturing to services, which challenges both economic policymakers, business stakeholders, owners, suppliers, competitors, and ordinary people: restructuring will encourage all economic players to learn how to adapt to new trends. That is why our research focuses on innovation and the ability of companies to create value. The IT sector is currently one of the fastest-growing and most innovative sectors within the service industry. The success of IT companies is greatly determined by their ability, how to make effective use of their intangible assets at their disposal, including intellectual capital, which is defined as a non-financial asset. So the question may arise: how is it possible to quantify and in monetary terms the intellectual capital of the companies to be examined? That is why, we calculated for the most successful Hungarian IT companies the widely recognized index, the VAICTM index, for which domestic calculations are not yet available. Indeed, this indicator eliminates the lack of information stemming from reporting standards by the methodology relying on publicly available financial reporting data. The indicator itself is a top indicator whose two main sub-indicators quantify the effectiveness of intellectual capital and physical capital.
-
Topology Optimization of Acetabular Cup by Finite Element Simulation
22-34Views:438Hip replacements typically consist of a four-part piece. Our research will focus primarily on the acetabular component. Several different types of materials can be used when creating a hip replacement implant ranging from plastic to titanium. Different materials are used to accommodate for allergic reactions or circumventing potential health risks. Aside from the material, the size of the components plays a factor in terms of durability; a larger diameter head might avoid dislodgement though it could increase wear and tear on the stems through constant friction. A patient’s force applied to the hip replacement is usually measured through a number of physical assessments. Finite element analysis (FEA), a computer-based method of data observation, allows for us to accurately simulate hip forces and their impact on the hip replacements. Through this, it becomes easier to predict and calculate the performance of specific designs. Generative systems can also be used to support performance analysis and optimization through assessing a multitude of cases, many of which apply in real-world scenarios. By applying both systems, we designed and modeled an acetabular cup that when measured decreased the mass from 129 grams initially down to 52 grams, a 60% decrease in total mass. Furthermore, the design we created lessened the trauma on the piece through distributing force across the entirety of the piece rather than specific segments only. This shows an increased durability and life expectancy when compared to usual acetabular cups.
-
A vállalati vagyon és a finanszírozás összefüggései a vagyonértékelés szempontrendszere szerint
69-79Views:220The availability for financial sources can be the key factor of competitiveness of enterprises. Under favourable conditions it can result in not only economic growth and conjunctural effects but indirectly it also has a positive influence on social level as well. In the first part of the article we make an overview on enterprise financing in both social and economic context and try to give an overall concept. In the second part we analyse the framework of financing, discuss the national and international specifications of financing, and finally, in the third part we analyse the background of enterprise financing based on the principles of asset appraisal.
-
Examining Drone Logistics Solutions in Retail
48-61Views:175The possibilities of using drones in transportation will be determined by the capabilities of drone technology, legislation, various advocacy and trade unions, and the degree of general acceptance. Technology and infrastructure are given, customer habits and needs are favourable, and emissions generated by packets moving between two points are growing steadily. Despite these favourable conditions, the effects of drone use should be thoroughly reviewed. The environmental impacts of the project were analyzed by PEST analysis and the main influencing factors were studied using the Porter model. Concluding our results based on questionnaire surveys and feasibility examinations of fast food delivery, it can be said that a system based on drones can efficiently be operated and cost-effective using round trips, however, the legal issues and uncertainties that arise in the delivery of drone hippers remain a very significant hindering factor for a long time.
