Search
Search Results
-
Designing of Lab-scale Anaerobic Digester Equipped with Maxblend Impeller to Evaluate Effect of Mixing on Anaerobic Digestion
404-413Views:146Operational parameters can be easily controlled at lab scale experiments for an anaerobic digestion process. Our aim is to design a lab-scale digester equipped with an impeller to investigate how the geometry of impeller and different mixing modes effect the biogas yield of digester. Further, the methods of measuring the gas volume, gas composition, mixing intensity, torque, temperature are discussed in this article. The assembling of 4 liters digester is described which can be operated at various operating parameters which control the anaerobic digestion process. Mixing is very important to enhance efficiency of an anaerobic digester. To attain mixing Maxblend impeller is used in this lab-scale digester due to its better performance for mixing and power consumption. Various design consideration has been described.
-
Combustors with Low Emission Levels for Aero Gas Turbine Engines
503-514Views:379The aircrafts are responsible for emitting several types of pollutants, especially the pollutants in the form of NOX, CO2, CO, UHC, SOX and Particulate Matter PM (smoke/soot). The impact of aviation emissions on the global is well known, where these emissions modify the chemical and microphysical properties of the atmosphere resulting in changes of earth’s climate system, which can ultimate in critical changes in our planet fragile ecosystem, also the pollutants produced by aircraft engines cause many health problems. This is why the International Civil Aviation Organisation (ICAO) is seriously seeking to control the emission levels by issuing new standards during the successive meetings of the Committee on Aviation Environmental Protection CAEP (CAEP/01 in 1986, CAEP/2, CAEP/4, CAEP/6, CAEP/8, etc). The new regulations include more stringent standards aimed to reduce emission levels, this led to increased interest in low emission technologies. In this paper, a comprehensive review of low emissions combustion technologies for modern aero gas turbines is represented. The current low emission technologies include the high Technologies Readiness Level (TRL) including RQL, TAPS, DAC and LDI. Also, there are advanced technologies at lower TRL including LPP, ASC and VGC.
-
Comparative Analysis of the Notes on the Accounts Of Information-Technology Servicing Companies in Hungary
186-194Views:214In the globalized and accelerated world of our time, challenges can only be met by companies that possess the necessary information and are able to convert it rapidly into organizational knowledge. Annual accounting statements are an important source of information within business relations among companies. The necessary information can only be obtained from the two fundamental parts of the annual statements (balance sheet and profit and loss account) if the notes on the account contains the information that contribute to the more comprehensive interpretation of the other parts of the annual statement. Decision-making based on inadequate knowledge further increases economic risks that are already high. In our research, we examine whether the notes on the accounts of companies include the information, which could help obtain necessary financial knowledge concerning the partner companies. For the analyses, we used the notes on the accounts of companies, which have information-technology services (Hungarian NACE No. 62) as their main line of business. By means of text mining, we analyse the extent to which the notes on the accounts are in conformity with the Accounting Act.
-
Comparative Analysis of the Notes to the Financial Statement of Companies Engaged in Sports Activities in Hungary, Based on the Information of the General Part
117-125Views:211Contribution of the sports sector to GDP in the EU Member States is close to 5%, while in Hungary it is approximately 1-1.5%. This ratio is likely to increase, for which various subsidies of corporate tax provide a good basis. The information mentioned above confirms that the economic analysis of companies engaged in sports activities is an interesting and necessary field of research. In our research, we examine whether the notes on the accounts of companies include the information, which could help obtain necessary financial knowledge concerning the partner companies. For the analyses, we used the notes on the accounts of companies, which have sports activity (Hungarian NACE No. 931) as their main line of business. By means of text mining, we analyse the extent to which the notes on the accounts are in conformity with the Accounting Act. The sports activity companies are analysed using various packages of the R statistical system. By means of text mining, we analyse the extent to which the notes on the accounts provide the necessary information that would be indispensable for the proper interpretation of the balance sheet and the profit and loss account.
-
The Potential of Online Workouts for Fitness Trainers
49-60Views:372The importance of physical activity for both physical and mental health is unquestionable. For leisure athletes, fitness clubs can be considered as popular facilities for everyday workouts. Classes run by qualified trainers, whether individual or group workouts, are very popular. In line with the worldwide trend, there is a growing expectation for fitness workouts to be reachable as simple as possible, in as many forms as possible, regardless of the location. The aim of our study is therefore to map the prevalence of online training among trainers working in the fitness sector. There is a significant demand for such workouts, even if it cannot completely replace hours of personal presence. In addition, as well as for target groups who want to find a form of exercise that can be performed anywhere, anytime, the online space provides an ideal opportunity to practice regular physical activity, as well as a good opportunity for coaches to expand their clientele and services.
-
Roguelike Games: The Way We Play
80-92Views:1275The spread of the gameable personal computers and game consoles resulted in the diversification of the video game genre, and from the 7th generation of the gaming consoles, the experience support of the games became largely enhanced. These games are now consumable owing to their resolution, the content, the plots are so fascinating so that they tie the gamer to the seat. Gamers seek experiences in the games. Still, such a special genre called roguelike was established, which is characterized by the constant termination of this world of experience in such a way that the gamer, as a results of the high level of difficulty, is obliged to start the game again and again. These new genre games are now leading titles of the new generation consoles, such as Demon’s Souls or the Returnal, gaining huge role in the introduction and sale of the new gaming console PS5. This study aims to reveal specifications of this genre, moreover, aims to describe through empirical research how gamers relate to it, and whether features of these games contribute to the devotion to them or lead to the disappointment from this world of experience.
-
Wearable technology usage among students of the University of Debrecen
33-47Views:136The lack of physical activity and the growing prevalence of a sedentary lifestyle are urgent public health problem worldwide. The problem is also typical of the young population, especially university students, who spend most of the day in a sitting position. Technological development is one of the catalysts for the rise of a sedentary lifestyle, nevertheless, thanks to this, many devices have appeared on the market that can be used to encourage physical activity. The widespread of wearable activity tracker devices – wristwatches, wristbands – among the population shows a constantly increasing trend, with a parallel increase in the amount of data collected about ourselves (step count, calories burned, heart rate). The main goal of the present study derives from the recognition of the gap in this field in the domestic sports science literature therefore our focus is on modern information technology tools in the dimension of physical activity. The aim of this study is to assess the attitudes of the university student population towards activity-tracking devices. We conducted a cross-sectional online quantitative survey (questionnaire) among DE GTK students. 340 people filled out the questionnaire correctly. In addition to descriptive statistics, parametric and non-parametric tests (Pearson's chi-square test, Fisher's exact test, t-test, Mann-Whitney test) were used to examine the relationships. The results of the statistical tests were considered significant if p<0.05. We performed the distribution of the variables using the Kolgomorov-Smirnov test. The majority of respondents (55%) have already tried some kind of wearable device that measures physical activity. Every third student (34%) are currently using their device. Those who have not tried these devices so far indicated the price as the primary deterrent. 32% of the students plan to invest in such a device in the future. 39% of device users use an activity tracker bracelet, while 61% use or used a smartwatch. In terms of sex, we did not find any differences in asset ownership. The primary goal of the students (66.8%) was to track their physical activity. The most frequently used function was tracking the number of steps, indicated by 81% of the respondents, followed by heart rate measurement (67%). Most of them (69%) set some kind of goal regarding their number of steps. According to every third student, they moved more as a result of the device and managed to maintain the increased level of physical activity. 44% of the students claimed that their physical activity did not change despite using the device. Students tend to disagree with the positive statements related to the devices in connection with a healthy lifestyle. Although the present study suggests that wearable devices have an impact on students and they track their measured data, it is questionable whether the devices themselves are enough of an incentive for students to develop a healthier lifestyle.
-
Sports Civic Organizations-Conceptualization Issues and Trials
127-135Views:148Lately published statistics of the Hungarian Central Statistical Office reveal such a phenomenon that in some years (between 2011 and 2015), that the number of sport related classic civic organizations has increased in the narrowing non-profit sphere. Inside, the role of sport has been intensified primarily among the sports associations, and not among the foundations. Considering the Central Statistical Office methodology, the questions arises and serves an issue that how can we conceptualize a sport civic organization. Regarding the same topic, we may face diverse databases, and it also seems that different conceptualization approaches exist, we do not have uniform regulation, and current data also raise further questions. Through a “from general to specific approach” we aim to reveal that in what way a civic organization can be considered to be a sports related civic organizations and also try to highlight the consequences of this plural approach.
-
Reducing the use of chemical for biological wastewater treatment by technological modification
107-113Views:104In the Wastewater Treatment Plant of Debrecen Waterworks, the experts working there fight daily with various problems typical of the Hungarian plant. Suitable denitrification requires the administration of an organic substance in many cases containing biodegradable organic matter. Between January 1 and December 31, 2017, 183.1 t of organic matter was needed. It was important to develop a solution for the site's specialists to ensure efficient biological wastewater treatment without the need for additional carbon input in the technology. We have also supported calculations to ensure stable denitrification irrespective of the fluctuating C/N ratio of incoming sewage. Thus, it would be unnecessary to add up to 200 tonnes of organic matter per year to the technology without which biological wastewater could be achieved.
-
Volunteering in Sport
217-230Views:587The subject of our research was the examination of the sports ambition and its motivational background. Our aim was to examine the volunteer experience of young adults in volunteering. Our goal was also to analyze the areas in which sports are chosen most voluntarily and what motivates them in sport. The basis for our questionnaire research was the concept of volunteering "4 W" (who, what, where, why). The questionnaire was designed to answer these questions in relation to sports ambition. The data of the questionnaire completed by 371 young adults (mean age = 23.93, sd = 9.93) were analyzed using SPSS statistical software, where we calculated basic statistics (mean, standard deviation, median, mode) and Chi2 test. More than 75% of the respondents have already worked as volunteers. One of the most popular areas of volunteering was sport. The most frequented volunteering area was among schoolchildren and students as well as university sports among young people, after which the area of competition and recreational sports proved to be the most popular. The main motivation of young volunteer workers was the following, : „I had a good mood”, „I loved sport”, „teamwork”, „work experience”, „learning and skill development” and „career perspective”. Organizations, marketing and communication areas in the field of sporting events and sportsclubs volunteering were the most popular in the area where the respondents had experience. A significant difference was found in the field of organizing and marketing volunteering in sports events, 61% of Hungarians worked, while respondents from other countries were only 34.2% (p <0.05). In the field of communication, higher values of respondents from other countries (45.7%), compared with Hungarians (33.7%) (p <0.05).
-
Maintenance of Electric and Hybrid Vehicles
37-46Views:486An electric car is a vehicle powered by one or more electric engines, utilizing energy stored within batteries that are rechargeable. The first register of a usable electrical vehicle dates from 1880s. A hybrid vehicle incorporates two or more different power types, including, e.g., gasoline engines and electric motor. The goal in this work is to present the overall overview of the structure of the electric, hybrid and electric-hybrid vehicles, advantages and disadvantages of these types, the main points to focus when maintaining these and the challenges involved in its production and maintenance.
-
Sport Civic Society – Approaches and Facts
158-166Views:240After the change of regime in Hungary in 1989, the domestic civic sphere started to improve, and after numerous change in the legal regulation, currently the Act on Civic Organizations (Act 174/2011.) rules the operation of the sector before all, supplemented by additional legal background. The vital component of the new regulation is possibility of the appearance of the novel organizational form, the civic society, which is quite odd even considering the past and even on international level. The database enabling the statistical overview of the domestic nonprofits publish the end of 2019 provides no information on the data and operational features for this organizational form, which provides a thorough reason for the researcher to be interested in the topic and the organizations. Through the possible secondary data, a primary database of a lately done sports civic organization related research includes such basic data (even its sample height is small), which may be considered as a starting point at the examination of the specifications of the sports related civic societies.
-
Development of a Small-Scale Plastic Recycling Technology and a Special Filament Product for 3D Printing
365-371Views:340In our days, the fight against pollution has become a real challenge for the state. recycling is one of the solutions that is adopted in several nations to reduce the rate of plastic discarded in nature. The amount of plastic waste has been increasing for decades contributing to the environmental pollution that is one of the most serious problem of the mankind. according to the statistics not only the household plastic waste, but the industry discharge is increasing because the utilization of plastic as a raw material is more and more extending. plastic can be found in a lot of products, huge number of bottles, plastic bags, computers, auto parts are sold every day. The current applications for using recycled plastics in fabrication and design are fairly limited, on a small scale, plastics (such as abs, HDPe1, or Pe2t) are shredded and formed into pellets, and then either extruded into lament to be used in existing 3d printers, or injection molded into small parts and pieces of larger components. at a large scale, recycled HDpE is melted into sheets and either used directly as sheets in construction, or then heat formed from a sheet into components for construction. these methods of fabrication using recycled plastics are the norm because of their straightforward processes. nevertheless, each method leaves some complexity to be desired. This paper we study the types of plastics and diagnose the pollution caused by the latter. this allowed us to design and size a recycling station of plastic into filaments for three-dimensional printers. this station which will contribute to the fight against pollution. the station consists of two machines for grinding of the plastic and the other for the extrusion of the desired filaments. we were able to make a theoretical academic study on both machines and also we designed with solidworks 2015. The theoretical study is spread of the mechanical calculations necessary to the design and validation of the structure using the tools. as the prospect of this project, we want to complete the achievement of this station while completing the crusher and extruder mechanically. then switch to electric and electronic parts (introduction of engines, sensors and wiring...). In the case of waste plastics that are recyclable and reusable. the most widely used are polyethylene terephthalate (pet, used for synthetic fibers and water bottles), and second high-density polyethylene (hdpe, used for jugs, bottle caps, water pipes).
-
The Electric Vehicle Penetration in Hungary
551-562Views:1212During the past years I hear that the future of transport in the electric-powered vehicles. the Hungarian Goverment and the European Union is made more device is this form dissemination to the transport campaigners. EU tendering appeared in Electric Car Charging establishment, the number of multiplication of the expansion, faster recharging method of spreading. This is to depart from the common knowledge recharge time Lenght of significant, the range of motor vehicles despite low rate of population inspired make such purhase of motor vehicles. If that were not enough, the demand side cash incentive device support is, take the numbers provided consumer vehicles 1.5 million HUF state support. This endeavor though the influence of narrow you wish to inspect the car market segment of the reactions, the growth rate of the past few years. Although this is a state-pumped artificially induced market impact.
-
Motivational Factors of Choosing BMX and Other Extreme Sports
426-441.Views:464Extreme sports play an increasingly important role in the supply of recreational activities, as an increased consumer demand has shown a dynamic growth over the past decades. In our research, we investigated motivational factors related to leisure time and in particular BMX sport on a sample of 237 people who do extreme sports. Our results have revealed that BMX is mostly chosen by young men as a leisure time activity. The consumers of extreme sports are characterized by internal motivation, pursuit of their own boundaries, testing of novel and exciting activities and the need for doing joint activities with acquaintances and friends.
-
Pin on Disc Tests of Closed Cell Aluminium Foams
353-357Views:211Metal foams have a lightweight cellular structure with excellent mechanical and physical properties and are at the forefront of materials development for the automotive and other industries. Although metal foams are popular, they are still not sufficiently characterized thanks to their extremely complex structure. The aim of the research is the tribological investigation of closed cell metal foams with different production technologies and different cell sizes. The paper introduces the closed cell aluminium foams produced by direct foaming and gas injection and those raw materials. The Pin on Disc instrument and the most important parameters of the experiments are also presented.
-
The Relationship Between Sports Civic Organizations and Human Resources
146-154Views:223Every spring the Hungarian Central Statistical Office records through its ELEKTRA database system the human and economic related operation data of the past year of civic organizations. This data source is usually considered as a standard at the evaluation of the domestic civic sphere. Still, the available handout titled “Most important features of the non-profit sector”, applying mainly descriptive statistics only provides a brief picture of specifications of the sector. Parallel with it, its background database is available yearly, which provides a unique possibility for a researcher to perform secondary analysis aiming to reveal deeper relationship. The objective of our study is purely to reveal a minor part of this considerable field, the relationship between subsidies and human resources mainly due to the fact, that human resource in this sector is composed of employees and volunteers, and it is questionable whether subsidies have an impact on employment. Results revealed that there is a relationship between human resources and subsidies, where mainly private nature subsidies have a strong impact equally on voluntariness and work related employment
-
The Mechanical Properties of 3D Printed CuZn28 Brass Specimens with Different Orientations
253-259Views:228In this paper, the properties of CuZn28 brass raw material were presented. The 3D printed metal specimens are made from this material with different orientations. Their mechanical properties (tensile strength, yield strength) and elongation were investigated according to MSZ EN 6892-1: 2012 standard. The strength of the different printing directions is analyzed and it is determined which printing direction is the most favourable. Finally, the effect of the different printing directions upon the structure of the material is studied.
-
Healthcare Management Education - Forms and Contents
Views:246Gaining autonomy of a subfield of a private discipline has become plural up to the XXI. century. The appearance of the management discipline at the beginning of the XX. century mostly dealt with the industrial sector, and it was in relationship with the maximalization of efficiency. For now management became on his own in the healthcare sector, certainly regarding the education forms, which is emphasized the numerous educational ways on international level. Educational forms have a binary feature on national level, offering one BA and one MA possibility to learn. The objective of this study is to reveal diversity of the international education forms, illustrating their more important specifications, comparing them with the domestic relationship, all of which may highlight the need for new or novel education forms.
-
Applying New Innovative Market Research Methods in the Innovation Process of New Products
56-69Views:220The innovation environment has changed a lot in the recent years, companies and their enterprises concentrating on product- and process innovation have undergone a lot of changes. According to GUPTA et al. (1986) product innovation is a multidisciplinary process. Although, all functional interfaces are important in the product development process, the research and development – marketing interface is one of the most difficult one. In the last two decades the incredibly fast penetration of the internet has more and more effects on the consumer attitudes. It encourages market researchers to apply such methods by which they could get as close as to the consumers to know their attitudes without taking them out of their natural habitat. In this study our aim is to concentrate on the first phase of the product innovation, which is the exploration of insights and attitudes. In this phase we can use the classical, conventional market research techniques if we want to get primary data, such as focus group interviews, questionnaires, in-depth interviews, but there are new methods as well. One of such novel methods is netnography. The biggest advantage of this research method is that the researcher can observe the consumer groups’ state of mind and decision-making mechanisms through publicly available communication sources in their natural environment. In this study it will be analysed how the directions of netnographic researches have changed by the dynamic changes of the internet. Besides, online participants’ attitudes towards healthconscious nutrition are analysed in practice. As a result of this study, special groups could be identified, which can provide a new perspective for the companies operating in this field beside the classical segmentation techniques. These groups can be the ones which draw up latent market requirements, and thus, helping the companies’ innovation processes.
-
On Institutional Services from Foreign Students’ Perspective – What Makes a Higher Educational Institution Multicultural?
343-363Views:144Higher education is of the utmost importance in terms of the competitiveness of every nation, including the Hungarian economy, therefore it is considered determinant for the future to survey student mobility of foreign students pursuing their studies in Hungary. Demographic decline that is characteristic to Hungary, already makes its influence felt in higher education, therefore internationalisation of institutions is of essential importance in terms of their operation and sustainability. Currently, it cannot remain unmentioned that it is a question of vital importance for domestic higher education institutions – and this process might only be further strengthened in the future – how they are able to compensate declining domestic demand by making their workshops attractive to foreign students and researchers.
-
Formation of Oxide Layers with Femtosecond Laser on Steel Surfaces for Color Marking
174-178Views:209With the appearance of ultrashort pulse lasers, the researchers have begun working on various laser marking technology. Atmospheric heating and ablation of a surface induce laser coloration of metal surfaces. However, their application is still problematic today in the industry. With the appearance of femtosecond pulse lasers, a new concept became available for color marking. This concept is based on the formation of laser-induced periodic surface structures (LIPSS) on metal surfaces. The purpose of this article is to summarize the literature of laser color marking with ultrashort pulse lasers.
-
Sportcivil szervezetek – számok a támogatások növekedése mögött
126-134Views:165A KSH adatgyűjtési tevékenységének köszönhetően a nonprofit szervezetekre vonatkozó átfogó adatok mind adatbázis, mind tájékoztató formájában elérhetőek. A gazdasági adatok között feltűnik az az évről-évre hasonló nagyságú, domináns támogatási részesedés. Különös tekintettel a klasszikus civil szervezetekre ez egyértelműen jelzi azt, hogy a szféra támogatáskitett és támogatásfüggő. Ezek a szervezetek ugyanis kimondottan alkalmasak támogatások fogadására. Tanulmányunkban szeretnénk másodelemzés révén rávilágítani arra, hogy a sporttal foglalkozó civil szervezetek/sportcivil szervezetek száma milyen összefüggésben van a támogatásokkal, különös tekintettel két specifikus támogatási formára, a NEA-ra és a TAO-ra vonatkozóan. Az eredmények arra utalnak, hogy van összefüggés a támogatások összegének növekedése és a sportcivil szervezetek számbeli növekedése között, és ez kifejezetten igaz az egyik legrégebbi és legújabb támogatási forma esetében is.
-
Surface Activation of High Impact Polystyrene Substrate Using Dynamic Atmospheric Pressure Plasma
80-87Views:144Over the last decade, the number of researches has increased in the field of bonding technologies. Researchers attempt to improve surface adhesion properties by surface treatments. Adhesive bonding is one of these bonding techniques, where it is important to see what surfaces will be bonded. One such surface property is wetting, which can be improved by several types of surface treatment. In recent years, atmospheric pressure plasmas have appeared, with which research is ongoing on surface treatments. In our research, we will deal with the effects of plasma surface treatment at atmospheric pressure and its measurement. In addition, we summarize the theoretical background of adhesion, surface tension and surface treatment with atmospheric pressure plasma. Our goal is to improve adhesion properties and thus the adhesion quality.
-
Design an Opening Force Measuring Device for Balancing Clips
220-225Views:121This paper deals with the development of a force measuring device to determine the opening force of different types of balancing clips. These elements can be used in the impellers of ventilators to rebalance the rotor. The measuring device contains a commercially available beam type load cell. The data processing is performed by Arduino Nano development platform with a 24-bit sigma delta A/D converter. The device is well applicable to determine the opening force of the clips in different opening distances.