Search
Search Results
-
Parallel Data Acquisition and Processing with Paspberry Pi Clusters
40-45Views:138Computer network was built from Raspberry Pis, what can solve research task in the filed of building mechatronics. According to the results, it can state the cluster built from Raspberry Pis, can process indoor sensor data effectively
-
Optimizing the combustion processes of a small scale solid fuel-fired boiler
358-369Views:144Over the last decade, the public has been paying increasing attention to reducing greenhouse gas and acid rain emissions and reducing particulate matter, which is extremely harmful to health and the environment. To improve air quality, the European Commission has achieved a range of measures to reduce air pollutant emissions in the transport, heat and electricity, industrial and agricultural sectors. In Hungary, the amount of gas and solid air pollutants from solid fuel combustion used by the public during the heating season represents a significant percentage of the total amount present in the atmosphere. In 2016, taking into the total emission, the 29% of CO2 emissions; 85% of CO emissions; 75% of the particulate matter emissions and 21% of the NOx emissions were derived from households. It follows that the improvement of air quality can also be achieved by controlling the emissions of solid fuel combustion plants. During our research we aimed to optimize the operation of a newly purchased TOTYA S18 boiler and a pilot pellet boiler. Operating the boilers in the correct mode minimizes air pollutant emissions, and the greater part of the heat generated is actually turns to heating the home, as with poor settings, a lot of heat leaves through the chimney. The data obtained during the tests can also be used to determine whether the boilers comply with the emission values set out in Commission Regulation (EU) 2015/1185.
-
The Empirical Examination of Different Customer Types
92-100Views:157The proper knowledge of customer types is essential for a well functioning company – regardless of its size. In current research we wanted to identify and characterize the particular customer groups with involving 302 persons. During the examination we measured the attitudes of these participants with the help of a statement range based on Kotler’s classical customer types. For the identification we made factor- and cluster analysis, and we could separate five different factors. They received the names of Angry, Definite, Discursive Passive, Experience Shopping and Indefinite - based on some related statements. After the cluster analysis – along these factors - we could separate four different groups: Young Impulse Shoppers, Outspoken Definites, Negatives and Born Customers. Each and every group requires different communication, sales attitude and service morals.
-
Development of a Low-cost Pressure Sensor
33-38Views:236In this paper development of a pressure sensor has been discussed. The main benefit of this sensor is relatively cheap compared to commercially available ones. The unit contains a beam type load cell and a pneumatic cylinder. The load cell has 4 strain gauges in Wheatstone bridge configuration in order to convert the change of resistance into measurable voltage. The system is well applicable in numerous circumstances, where digital pressure signal is necessary for control or data acquisition.
-
Potential Impact of Innovation on the Competitiveness of Sports
666-677Views:263Innovation and development activities related to sports and the tools created during the processes facilitate performance sports players (athlete, coach, sports manager) to achieve outstanding results in their field.
The success of sport can have a major impact on the social image of sport and its economic potential, and thus on the future of the sport. In my paper, I undertake to introduce the innovation processes associated with competitive sport and the products that result from these innovative activities, and then examine how and to what extent these supplies influence the economic and professional performance of the sports under investigation.
-
The Effect of Fluxes on the Melt Quality of AlSi7MgCu Alloy
372-380Views:209The presence of inclusions such as oxides, carbides or refractory particles can be harmful to the mechanical and surface characteristics of castings. Inclusion-rich metals result in lower fluidity and feeding capability during casting. Nowadays, solid fluxes are widely used in foundries in order to reduce the inclusion content of aluminium melts. In this study, the effect of four different fluxes on the melt quality was studied. First, the inclusion content of the flux-treated melt, and then the properties of the fluxes (i.e. chemical composition and melting temperature) were examined.
-
Examining the Competitiveness of Fish Products on the Market
151-163Views:99Fish and fishery products are one of the key ingredients in human nutrition and are therefore outstanding in terms of both production and trade. Different processed fish products are available in many countries around the world due to globalization and a fast supply chain. In our study, we examined the market for fish and fishery products using secondary data collection. The data were collected several years ago from the databases of FAO, EUROSTAT, COMTRADE and KSH The comparative advantages or disadvantages of international trade were determined with the help of the RCA index for the role of Hungary and the EU in the world in the case of different categories of fish products. The aim of our research is to compare the fish products of different processing in Hungary and in the EU compared to the international situation, paying special attention to the main exporting and importing countries. Based on the secondary research the study has a detailed the specificities of trade, the trends observed in recent years and the competitiveness of fish products in Hungary and the Member States of the European Union and effect relationships behind the RCA-index results.
-
Production of Liquid Hydrocarbons from Plastic Wastes
345-350Views:146Thermal pyrolysis of HDPE, LDPE, PP and PS plastic wastes were performed in a batch reactor and the yields of pyrolysis oils and liquid transportation fuels prepared by atmospheric distillation were determined. The gasoline fractions were tested in a traditional spark-ignition engine without any modifications or fuel blending. Fuel consumption and exhaust gas emission (NOx, CO) were measured and compared to a commercial fuel (RON = 95). PS generated 70.5% gasoline range hydrocarbons from the solid waste, followed by PP with 42.1%, LDPE with 40.8% and HDPE with 37.3%. The fuel consumption was reduced by 9.1-9.4% in the case of PS compared to reference measurement. Reduction in fuel consumption was noticeable at HDPE, LDPE and PP as well. PS gasoline decreased by 91-96%, while HDPE, LDPE and PP more likely increased the CO emission of the engine compared to commercial gasoline. The results show that pyrolysis of plastic wastes is a promising method to generate value added liquid transportation fuels and reduce the footprint of waste accumulation in landfills.
-
About Gamification & What Do We Use for Nowadays
171-180Views:879By the widespread increase of new technologies, Internet has become an essential element for generation Z, however, this is not particularly surprising given the fact that over recent years different IoT solutions have become widely available, well-known and increasingly cheaper. Thus the grown up of Net Generation brings innovative solutions to the fore by which motivation is not forced to students anymore but there will be a real internal demand from their side in accordance with the age of Motivation 3.0. If this will be the case, the social issue of Homo Ludens will be also appeared in parallel to gamification [1]. Gamification nowadays is a method that become more widely used depending on field of use, thus it may meet needs of businesses and also educational institutions. The term of gamification is understood to mean those technics and methods when game elements are used in non-gaming environments [2]. Since we do not concentrate on learning during games, students will find learning a pleasure rather than an imposition and it means many could improve their skills or receive information without realizing they are actually studying. Moreover, despite the traditional learning method, the knowledge acquired this way can be used for a long time during seminars and later on labour market. Gamification plays an increasingly important role in business and also in education [3]. Students may learn more effectively and with a lower effort using gamification. As a result, this innovative approach of learning has been becoming more and more popular internationally, furthermore, motivation shortage problems also could be solved by this method [4].
-
Development and Characterization of Sisal Fiber Reinforced Polypropylene Composite Materials
348-358Views:428In most of the developing countries, plastic polypropylene is not fully recycled and converted in-to use after it is once used. Sisal fiber is also widely available in different developing countries like Ethiopia. Adding this two materials and developing automotive interior part was taken as a primary motive for it reduces cost and is environmentally friendly. Thus, the main purpose of this research is to develop composite material from natural fibre (sisal fiber) reinforced with recycled plastic waste (polypropylene) for interior automobile accessories specifically for internal door trim panel application. This research examines effect of fiber length, fiber loading and chemical treatment of fiber on the physical and chemical properties of the sisal fiber reinforced polypropylene (SFRPP) composite material. The waste polypropylene and the treated and untreated sisal fiber with variable length and weight ratio (fiber/matrix ratio) were mixed. Flammability of sisal fiber reinforced Polypropylene (SFRPP) composites material was examined by a horizontal burning test according to ASTM D635 and chemical resistance of the sisal fibre reinforced PP composites was studied using ASTM D543 testing method. The result on the flammability test shows that treated fiber has lower burning rate than untreated fiber and decreases with increase in fiber length and fiber loading. The resistance of the composites to water has increased as the fiber length increases and decreased as the fiber loading increase. Generally, SFRPP composite is found to have better resistance to water than NaOH and H2SO4 and treating the fiber has brought considerable improvement on chemical resistance of the composite. Fiber loading and fiber length has positive and negative effect on the flammability of the SFRPP composite respectively.
-
The Top 5 e-commerce Competitive Advantages in Hungary
128-139Views:247Abstract. In my article, I map out the key competitive advantages that are essential to online commerce, online store sales, success, and popularity. There is a wealth of literature on the subject. Year after year, more and more research and surveys are conducted on customer value, shopping habits, consumer behavior, digital transformation, which I would like to summarize and articulate, and highlight the main elements without which online sales would not be effective.
-
Efficient removal of salts from the residual dross of aluminium melting
259-269Views:147A residual dross of high quantity and high salt content arises from the hot (thermo-mechanical) treatment of the primary dross generated by the production of aluminium alloys from scrap. It contains a relatively low concentration of metal (5 – 10 %) but a high amount (30 - %) of chloride salts and some other components beside the oxide matrix. Due to the components dissolved in or reacted with water, this industrial residue - arising in thousands of tons also in Hungary – qualifies as hazardous and causes a real burden to the environment. According to the laboratory experiments aimed at an economical technology, the chlorides are dissolved within a few minutes when a liquid/solid ratio of 1:1 cm3/g (water volume:sample mass) is assured with an intensity of the horizontal shaking to prevent sedimentation. However, the filling ratio of the vessel also appears to have an effect. An implementation of relatively low cost would allow the recycling of the salt and the application of the final residue for alternative purposes.
-
The Mechanical Properties of 3D Printed CuZn28 Brass Specimens with Different Orientations
253-259Views:238In this paper, the properties of CuZn28 brass raw material were presented. The 3D printed metal specimens are made from this material with different orientations. Their mechanical properties (tensile strength, yield strength) and elongation were investigated according to MSZ EN 6892-1: 2012 standard. The strength of the different printing directions is analyzed and it is determined which printing direction is the most favourable. Finally, the effect of the different printing directions upon the structure of the material is studied.
-
Consumer Perception of Electric Cars in Hungary – Theoretical Considerations and Empirical Results
1-23Views:461Electric cars are becoming increasingly popular in the automotive industry and among consumers; partly as a result of their environmentally friendly characteristics. The aim of the study is to compare the main characteristics of electric and conventional cars in the context of environmental protection. In the first half of the study, we present the life cycle of electric and conventional cars and we compare the overall environmental impact traditional an electric vehicles. We point out that although the operation of an electric car does not pollute the environment locally, the manufacture, charging and disposal of batteries required for operation raises several issues related to environmental pollution. In the second part, we examine the respondents' attitudes towards electric cars based on our own questionnaire research. On the basis of the answers, it can be said that consumers still consider electric cars expensive and are aware that electric cars address some pollution issues to a small extent.
-
Security Evaluation of MODBUS RTU Protocol, Testing New Cryptographic Methods
35-42Views:169In the late decade, the number of attacks against SCADA, CIS, or ICS systems had grown considerably. The purpose of this paper is to summarize the results of the implementation of a new cryptographic method on th e MODBUS RTU line.
-
Investigation of application and development of precision irrigation technology
239-248Views:250Due to the extreme weather conditions irrigation is nowadays considered an increasingly necessary factor. After evaluating the water requirements of the plant and the available water resources is necessary to decide what irrigation method to use. One of the most commonly used methods in field conditions is rain-type irrigation, of which there are several types (eg linear, winding drum). The uniformity of the field nozzles can be characterized by the Christiansen uniformity factor (CU%) and the distribution uniformity factor (DU%). The coefficients can be derived from the volume of water captured by the rain gauges. Our investigations were carried out in July and August 2019 at the University of Debrecen's Vision Plant Experimental Plant and at a linear irrigation equipment of a Nyírbátor company. The aim of the study was to compare the uniformity of water dispersion applied by conventional linear technology and precision linear irrigation technology. In addition we examined the intercept values of maize.
