Search

Published After
Published Before

Search Results

  • Performance of agricultural factors on yield of  sweet corn (Zea mays L. Saccharata ) - A review
    143-156
    Views:
    989

     Sweet corn producers and industries require more reliable cultivars which could be accomplished by hybrid breeding. However, progressive phenological growth may be affected by different factors. In this paper, we analyze the key factors that determine the growth and yield of sweet corn. Environmental factors such as temperature and photoperiod were strong determinants of dates of flowering and harvest which are often crucial to yield in diverse climates and agricultural systems, besides the country's pedological conditions, especially soil fertility, affected phenological development. The effectiveness of fertilization in improving sweet corn growth performance was significantly influenced by the soil characteristics, the water supply, the genotype, and the agrotechnological factors. Therefore, genetic improvement of hybrids should be incorporated into the climate and soil elements to stabilize sweet corn yields in various agroecosystems. Decisions made in the sowing period are very significant, as up to 30% of the obtained yield may depend on making the proper choice. Deviation from the optimum date (either early or late sowing) may decrease yield. When deciding about the sowing date of maize, one needs to consider climate, soil quality, geographical location, temperature, weed infestation, sowing seed quality, and the ripening time of the hybrid to be produced.

  • Application of laparoscopic artificial insemination in conventional Lacaune sheep farm using frozen-thawed semen
    133-138
    Views:
    564

    The complex anatomical structure of the ewe reproductive tract accompanied with low quality of frozen ram semen for artificial insemination, resulted in a challenge with regard to using superior genotypes for reproductive ovine performance. Hence, improved genetics in ovine management has not been efficiently and widely used especially in undeveloped countries. Therefore, intrauterine semen deposition by laparoscopic insemination should be adopted in the current sheep production systems. Thus, this study aimed to assess the pregnancy rate and lambing rate of ewe inseminated by laparoscopic insemination techniques using frozen-thawed semen. The research used imported frozen semen from two rams of the Lacaune breed. Ewes were grouped according to age in years (1, 2 and 4). Before insemination, the semen was examined microscopically for its motility and viability and thereafter the laparoscopic artificial insemination technique was performed to 19 Lacaune breed ewes using frozen-thawed semen. The overall pregnancy and prolificacy rates were 31.57% and 42.10% respectively. Out of 2 ewes in the 1-year age group that were inseminated, only 1 ewe lambed representing 50%. However, from 16 ewes inseminated of four-year age group, 5 ewes lambed representing 31.25%. Significant difference based on age group was not evaluated due disproportionate of the data, (such that the data included 2 ewes in one-year-old age, 1 ewe in 2-year-old age and 16 ewes in 4-year-old age). Based on the ram semen, 33.33% and 30% of the inseminated ewes were pregnant from ram A and ram B semen respectively. However, in the case of prolificacy rate, 44.44% and 40 % of the ewes lambed from using semen of ram A and B, respectively. There was no significant difference (p>0.05) in pregnancy and prolificacy rates based on semen from the two rams. In conclusion, in this research study, ram semen had no significant effect on pregnancy and prolificacy rates using laparoscopic AI on Lacaune sheep. This could be due to the fact that the rams had very good quality semen. Evaluation of ram semen, accompanied with appropriate ewe selection based on age and rightful deposition of semen could lead to better and more consistent results. Overall this could contribute to the successful application of laparoscopic artificial insemination in Lacaune sheep production systems for enhanced productivity.

  • Effect of different N doses on maize yield and quality
    97-101
    Views:
    410

     The effect of N doses on the yield and nutritional values of the Sushi (FAO 340) maize hybrid were analysed in three years (2018, 2019, and 2020). The analyses were performed at the Látókép Experimental Station of the University of Debrecen on calcareous chernozem soil, in a striped, small-plot, non-irrigated long-term field experiment. In the experiment, in addition to the non-fertilized treatment (A0), the N-fertilizer doses were applied as basic fertilizer and top dressing. The 60 and 120 kg N ha-1 dose (A60, A120) applied as spring basic fertilizer were followed by two phases of top-dressing in V6 (V690, V6120) and V12 (V12150, V12180) phenophases; the amounts were +30 and +30 kg N ha-1.

    Maize yields were affected to varying degrees by crop year. The highest yields in 2018 and 2020 were recorded in the same V6150 treatment, while in 2019 the highest yield was obtained in the A120 treatment.

    Increasing the N doses resulted in an increase in the protein content of the maize kernel. Depending on the fertilizer treatments and the crop year effect, the protein content of maize kernels varied between 6.2–10.2 g x 100 g-1. In all three years, the protein content was the lowest in the control treatment (A0) and the highest in the V6150 treatment.

    The starch content ranged from 70.7 to 77.9 g x 100 g-1 in the average of the three years. In 2020, it was significantly higher in all nutrient treatments than in the other examined two years. The highest starch content - except for 2020 (A120, 77.9 g x 100 g-1) - was recorded in the A0 treatment (74.2, 72.3 g x 100 g-1).

    The oil content of maize kernels varied between the values of 3.8 and 5.2 g x 100 g-1 in the average of three years. In terms of oil content, the results for 2018 and 2019 can be considered the same, while in 2020 it was significantly lower. Fertilizer treatments did not significantly affect the oil content of maize in any of the years.

    The fertilizer dose applied in the V12 phenological phase was not effective in terms of yield and nutritional content (protein, starch and oil content).

  • Connection of protein and amino acid content of forage and medium quality winter wheat varieties
    101-107
    Views:
    699

    We analysed the crude protein content, amino acid content, amino acid composition of four forage and milling III. quality winter wheat varieties (Magor, Hunor, Róna and Kondor) from their samples from five following years (2003, 2004, 2005, 2006, 2007). We found that quantity of essential and non-essential amino acids rose with increase in crude protein content. On examination of protein amino acid composition in relation to crude protein content we found that the crude protein content increased the quantities of the non-essential amino acids also rose, while those of the essential amino acids decreased as the lysine, the limiting amino acid of wheat. We also established that, as crude protein content increased, the biological value of the protein decreased.

  • Overview of test methods used to classify wheat flour and bread samples – REVIEW
    27-34
    Views:
    441

    In Hungary, common wheat (Triticum aestivum ssp. vulgare) is of good quality and world famous. In addition, it plays an important role in the human diet. The classification of flours ground from wheat is quite decisive and there are several methods for its examination. The most important flour testing requirements include moisture content, protein content gluten properties and the most important bakery value number. The measured characteristics give us the opportunity to conclude about the properties of the dough, and then bakery products. Several dynamic and static methods have been developed to study the physical properties of dough. The evaluation of products can be carried out in several respects with the help of a baking test. The multitude of methods currently used to qualify flour, dough and finished products also proves that the overview of the methods is quite topical.

  • Analysis of integrated, quality and environment focused management practices in the Forage Industry Ltd, Bábolna
    74-79
    Views:
    274

    The significance of the effect of agricultural activities on the environment was focused on later than that of industry; however, today, an increasing number of companies using an environmental management system (EMS) has been registered in this sector, too. In the agricultural sector, EMS according to ISO 14001 was introduced first in the forage industry by Bábolna Takarmányipari Kft. In our study, we analyze the environmental management system integrated into the quality system of this company and discuss the effects on the organization and the economic issues. As a result of the EMS, emissions have been reduced effectively, and both the responsibility system and technology have become more controlled. The company chose to develop its environmental performance continuously, which is proved to have been performed successfully, considering its limited, one-year experience.

  • The methodology of Event History analysis and its application in the quality control of raw milk
    74-79
    Views:
    184

    Event-history analysis is among the most frequently adopted mathematical methods, mainly due to the numerous types of models, available in the analysis. This method is also appropriate for analysing risk. Specifically, it has been employed in medical and animal-breeding science to manage risks. In this article, I give a presentation of the basic concepts, the basic types of models and their theoretical basis. I deal with the nonparametric Kaplan Meier and the parametric Cox proportional hazard model. The case study is also analysed with these methods. The results shows, that the 16-stall caroussel is the most effective facility from the viewpoint of quality. Milking into assay crucible (sample- cup) is more effective than to the floor after 16 decades.

  • The hydric stress influence on quantityand quality of the maize yield in the Crisurilor Plainconditions
    21-27
    Views:
    268

    The paper is based on the researches carried out in an experiment placed on the preluvosoil from Agricultural Research and Development Station Oradea, Crisurilor Plain during 2008–2011in the following variants: V1=Irrigated, without irrigation suspending; V2=Irrigated, irrigation suspending in May; V3=Irrigated, irrigation suspending in June; V4=Irrigated, irrigation suspending in July; V5=Irrigated, irrigation suspending in August; V6=Unirrigated. The hybrid used: Fundulea 376. In the variant with optimum irrigation, water reserve on 0–75 cm depth was maintained between easily available water content and field capacity. Pedological drought was determined every year and the irrigation was also needed. The irrigation determined the increase of the total water consumption and yield gain in comparison with unirrigated variant. Irrigation suspending in different months determined the yield losses very significant statistically. The biggest protein content was registered in the variant without irrigation suspending; the values registered in the variants with irrigation suspending in May, June, July and August and in the unirrigated variant are smaller, with differences statistically assured. There was a direct link between de Martonne aridity index values and water consumption, yield and protein content and an inverse link between pedological drought and yield quantity and protein content. These are the arguments for irrigation opportunity in maize from Criurilor Plain.

  • Goose Production Responses to Grass-Based Diets
    26-28
    Views:
    355

    A feeding trial with 4 week-old goslings was conducted in 2003 using different proportions of chopped grass and grain pellets in the diet. Proportions of chopped grass and grain pellets in diets for Treatments 1, 2, 3 and 4 were 25:75; 50:50; 75:25 and 0:100, respectively. Weekly and final live weights of geese and the feather quality were measured. Treatments with higher grain contents produced higher live weights, and better feather quality.

  • The social basis of regional development in the North Great Plain Region
    57-65
    Views:
    651

    It is a widely accepted practice in the European Union to break down countries into regions according to their stage of development, their cultural and economic characteristics. The basis of this methodology is the EU-conform MOTS system, which distinguishes territorial units on five levels. Besides the MOTS system, Hungary uses another system, too, which is the basis of our public administration, and whose roots go back to the times of King Saint Stephen: the county system. In Hungary, developmental decisions are taken by a county’s general assembly; at the same time, from an economic point of view the characteristics and competitive advantages of a county can be defined more precisely than those of a region.

    Szabolcs-Szatmár-Bereg County and Hajdu-Bihaur County may be described with completely different characteristics, albeit both of them are part of the North Great Plain Region. On a county level economically important and justified developmental areas may be mapped more precisely.

    Hajdu-Bihar County is the 4th most populous county in Hungary. With 80.2% of the population living in cities, the county is significantly urbanized. 2010 statistics show that the birth rate per 1,000 people in the county is practically the same as the birth rate of the country and that of the North Great Plain Region. Following the trends in developed countries, mothers now tend to give birth in an older age. Almost half (44.5%) of the children in Hajdu-Bihar County are born after their mother’s 30th birthday.

    The general health condition of the population of Hajdu-Bihar County can be described with various indicators. In terms of medical and hospital care no difference can be observed between regional and national data, the county’s health care does not straggle behind. In sum, with the health care system of the county, estimated life expectancy of men is higher than the regional average, and in case of women it is higher than both the regional and national average, according to the given year’s mortality.

    Children’s ratio among the county’s population is 15.9%, which is more than 1% over the national average. The ratio is higher in case of girls and boys alike. The income of the county’s population depends not only on labour income but also on social benefits. According to the analysis, the proportion of old-age pensioners and those receiving pension-like allowances within the whole population is somewhat lower in the county than the national average. The number of children receiving child-welfare and daytime care is prominent in the county.

    The number of families and children receiving child-care allowance has not changed significantly in recent years. All important elements of social benefits have increased in the last decade. The quality of life of the county’s population is largely affected by the presence (or absence) of basic infrastructure in their environment. Research conducted at the settlements of the county shows that currently the greater part of the population has access to basic public utility services which form part of everyday services. Although they affect the general quality of life, the network of roads and passenger traffic have their real significance in terms of economic development. The county’s modern, paved road-system had already been built earlier.

    Roads and pavements in inner-city areas have been paved up to 70%. The technical condition of roads and pavements can seriously impede the population’s mobility and it may hinder the development of certain settlements and districts.

  • Examination of physical properties of final product and drying properties of combined (convective pre-drying and freeze finish-drying) dehydration method
    5-12
    Views:
    303

    In this study, the effects of freeze drying (FD), hot-air drying (HAD) and combined drying (HAD-FD) on drying characteristics, energy uptake, texture, rehydration and color of carrot were investigated. Results showed that HAD-FD significantly improved the drying time compared with FD under the same operating conditions, and the HAD-FD can reduce the total cost of dehydration. The drying kinetics was described by the Henderson-Pabis and the third degree polynomial models in the case of HAD, FD and HAD-FD. The HAD carrot samples were exhibited shrinkage, case hardening, poor rehydration and brown surface. The FD carrot cubes appeared porous structure, excellent rehydration, soft texture and loose color. The HAD-FD samples were superior to HAD products and was nearer in quality to FD products with respect to appearance, rehydration and surface resistance (texture). Finally, it is concluded that HAD-FD is effective in improving the FD drying rate. However, the combined drying has a small-scale adverse effect on product quality.

  • Effect of plant growth promoting Rhizobacteria (PGPRS) on yield and quality of processing tomato under water deficiency
    19-22
    Views:
    511

    Chlorophyll fluorescence was measured of H1015 tomato hybrid with different bacterial treatments (B0–B1–B2–B3) and three irrigation treatments: regular irrigated (RI), deficit irrigated (DI) and non-irrigated conditions (I0). The aim of the experiments was to show the effects of plant growth promoting rhizobacteria on the yield, dry matter and vitamin C content of processing tomato during different irrigation treatments, and measuring the chlorophyll fluorescence during the ripening and development stages. According to the results, none of the bacterial treatments had a statistical effect on the quantity and quality of the tomato and on the chlorophyll fluorescence, only the irrigation. Further studies are needed.

  • The effect of the dates of shoot selection and shoot tip removal on the growth of William’s pear trees
    65-70
    Views:
    271

    Increasing the intensity of production in the case of pear can be the solution to satisfy the market demand forr high-quality fruit. The aims in this technology are the canopy treatments and the maintainance of consistently high quality yields in the long run. The experiments were performed with cv. William’s pear, a cultivar grown on large areas in Hungary. To create the optimal canopy shape for earlier fruiting, we performed shoot selection and the cutting back of shoot tips. Our results show, that both pruning methods – applied at 3 different dates – decreased the number of short fruiting parts (spurs), and increased the number of vegetative shoots. The sole exception was from this the effect of shoot tip removal when done at the earliest date.

  • Tulip bulbs preparation by heat treatment for forced culture in green house
    70-72
    Views:
    255

    Tulip can be grown in parks as ornamental plant and cut flowers, or possibly in protected areas for cut flowers during winter and early
    spring.
    An important condition for the successful cultivation of tulips is the quality of the bulbs that are going to be planted and their
    biological preparation.
    Under the quality aspect bulbs have to be uniform and large, preferably with circumference greater than 11 cm and must have good
    phytosanitarical status.
    Preparation of organic bulbs for ensuring the continuation of the differentiation process of germs (floral), is made during the storage.
    It is known that the preparation of organic bulbs are made in interaction with environmental factors, among which temperature plays an
    important role. At the beginning and throughout the process of biological preparation, temperature is maintained at a higher level then the
    temperature must be low until planting.
    The temperature level and the duration of treatment varies by followed objective respectively early or late flowering and staggered
    flowers production over a longer period of time.

  • Correlations Between the Crown Sizes, Pruning Times and Fruit Quality of Sour Cherry Cultivars
    90-94
    Views:
    272

    To increase the intensiveness of sour cherry production, i.e. the use of smaller trees, it is necessary to adopt growth-moderating techniques rather than using dwarfing rootstocks. Apart from the traditional technique of using rootstocks that support stronger growth, new or rarely-used techniques and methods must be adopted. Pruning should be carried out in the summer rather than in the winter, the optimal period being 1-3 weeks after harvest.
    A combination of the increase in favourable exposure-time and smaller crown sizes make higher tree densities (tree/ha) and better utilisation of the crown (specific cropload) possible.
    The systematic use of summer pruning leads to better quality fruit.

  • Seasonal variations in somereproductive parameters of Dorper Rams in Hungary
    17-20
    Views:
    721

    The purpose of the present study was to test the hypothesis that season has an affect on semen quality and scrotal circumference of Dorper rams. The experiment was carried out with six Dorper rams aged between 15 and 18 month. Semen samples were collected with artificial vagina and volume, concentration (x 109/ml), total sperm number/ejaculate (x 109), mass motility (0–5), progressive motility (%), scrotal circumference (cm) was observed. Significant differences (P<0.05) were observed in concentration, total sperm number/ejaculate, scrotal circumference in different seasons. Volume was the highest in autumn (1.4±0.5 ml) and the lowest in the spring (1.3±0.4 ml). Concentration of semen was lower in spring (2.6±1.5 x 109) and summer (3.3±1.5 x 109) as compared to fall (4.1±1.1 x 109) (P<0.05). Regarding total sperm number/ejaculate (x 109), scrotal circumference (cm) all the seasons differed significantly (P<0.05), although the season had no effect on mass motility and progressive individual motility (P<0.05). In conclusion the present study showed that semen quality parameters and scrotal circumference of Dorper rams were better in autumn than in the other sea- sons.

  • The effect of season on the microbiological status of raw milk
    95-99
    Views:
    498

    Many factors can influence the microbiological quality of raw cow’s milk. In this study, our aim was to determine whether there was any difference between the microbiological statuses of milk produced in different seasons. Samples were collected and analysed from five dairy farms in Hajdú-Bihar County, from February to November in 2019. During our studies, total plate count (TPC), coliform count and Staphylococcus aureus count of raw cow’s milk samples were determined.

    There was no significant difference (P>0.05) between the mean TPC values detected in the milk collected in winter and autumn, but that values were significantly (P<0.05) lower than in the milk samples collected in spring and summer. Similarly to the TPC, in the case of coliform bacteria the lowest mean colony count was detected in the samples collected in winter. The difference was significant (P<0.05), compared to the values observed in the samples collected in summer. S. aureus was detected in bulk milk of only two farms in excess of 1.0 log10 cfu/ml. Also in case of S. aureus, there was a significant difference (P<0.05) between the values observed in the samples collected in winter and in summer. Samples from spring and summer contained the highest amount of S. aureus.

    Based on the results of our studies, in the case of almost all farms the mean TPC, coliform and S. aureus counts were lower in the samples collected in winter, than in the samples collected in summer. The fact that the samples collected in winter contained the lowest amount of colonies could be attributed to the inhibition of growth of mesophilic microorganisms below 8 °C. Furthermore, the fact that we observed the highest colony counts in samples collected in summer, can be related to the heat stress of cows during the summer due to unfavorable weather conditions (high temperature and humidity).

  • Carcass and the Meat Quality of Hungarian Lambs
    65-71
    Views:
    440

    The author investigated 153 lambs of nine genotypes originating from breeding flocks, and 50 lambs originating from production flocks. The investigations were performed between 1995 and 1998. The authors discuss the evaluation of comformation and fat cover according to EUROP standards. The authors also investigate the proportion of valuable meat by genotype, and – out of the internal value indicators – the dry-matter, protein, fat, connective-tissue and hemin contents comparing the flavour, aroma, tenderness, and oven loss of the different genotypes.

    The following findings should be highlighted:
    ♦ The Hungarian Merino breed should be improved, as – according to EUROP standards, more than 70% of these animals were rated as quality „R”.
    ♦ Hungarian fattening technology has to be preserved, as the lambs reach the desired slaughter weight within a short period of time, and without over-fattening.
    ♦ Readiness for slaughter, typical of each genotype, has to be defined, and slaughter at proper weight be achieved.
    ♦ It has to be re-evaluated whether the Hungarian Merino is the only breed which can be used in Hungary, as none of the investigations really proved the special characteristics and significance of this breed.
    The author summarizes the findings of the investigation in five tables.

  • The examination of relation between the C/N ratio and the biogas yields in the Regional Biogas Plant of Nyírbátor
    63-68
    Views:
    280

    The Regional Biogas Plant of Nyírbátor was built by the Bátortrade Ltd. The biogas plant contains 6 mezophil and 6 thermophil fermentation tanks, because the biogas production is based on mixed compositions. The regional plant is a multifunctional system. It produces agricultural products and biogas with high methane content. The utilization of biogas is also accomplished here; gas-engines transform it to electricity and
    heat-energy. The product electricity is used by the local plants, the surplus is sold. 
    The aim of the research is the examination of the quality and quantity of the input materials that put into the mixers and follow the seasonal, periodical and optional changes of the input materials. The analyzation of the quality and quantity data can give an answer to the optional changes of biogas production because the input materials determine the composition of the examined recipe. The C/N ratio was between 11-13, the maximal value of the biogas yield was observed by 12.35 C/N ratio.

  • Application of GIS, precision agriculture and unplugging cultivation in plant breeding of Karcag
    49-56
    Views:
    359

    In the last two decades, the prevailing ecological conditions and climate change have caused negative effects. Therefore, a paradigm shift is needed in the field growing of plants. The latest inventions, digital technologies, precision cultivation are not enough, the mentality of the farmers is more important. For this reason, not only big financial sacrifices, but adequate receptivity are needed on behalf of farmers. Adequate skills and continuous self-education are necessary. The yield of plant growing farms is determined by ecological conditions to a 40% extent, genetic background of the seed has a 30% share and the applied agricultural technology has a proportion of 30%. In different agroecological conditions, bred varieties of plants have bigger tolerance to unfavorable factors of the regions and significant yield stability. Farmers, who buy and sow seeds, can only contribute to the genetic potential of the seeds with cultivation technology. Plant breeding provides stable genetic background and good quality seeds. Breeding activity – choosing variety proposants, breeding them, selection work, classical breeding process for 8-10 years – must create new landraces, which can produce balance, high yield and have good quality parameters in extreme ecological conditions, yearly excursion and have higher tolerance to unfavorable factors of the region giving significant production stability for farmers. In Karcag GIS technology, precision cultivation elements and soil-friendly agrotechnical methods have been introduced which largely support the aims of breeding and can also provide optimal cultivation conditions in extreme years. Because of the specificity of breeding the main aim is not only to increase yield but to provide harmonic growing for bred materials, to decrease the number and the cost of cultivation and to be punctual. In this study, applied new methods and technologies are introduced.

  • Use of extensigraph in the examination of wheat flours
    17-23
    Views:
    542

    The extensograph is widely used in quality control and research laboratories studying wheat flour quality. The most commonly used measurements include Rm, the maximum resistance (maximum height of the curve); R5 the resistance at a constant extension of 5 cm; E, extensibility (total curve length); Rm/E, the ratio of maximum resistance to extension; and A, the area under curve. The extensograph has proved useful in the classification and assessment of flours on the physical dough properties. Another important application is its use in wheat breeding programs. Furthermore, extensograph is an excellent tool to study the effects of a wide range of ingredients on dough properties of wheat flour (like oxidants, enzymes, salt and additives), and it can also be used measure the changes during the frozen storage. In the present study we provide a review of the scientific literature concerning the possible applications of the extensograph.

  • Soil – Environment – Sustainability
    331-337
    Views:
    350

    The future and life quality of human society depends primarily on the success of the sustainable use of natural resources: the geological strata–soil–water–biota–near surface atmosphere continuum. Soil is the most significant conditionally renewable natural resource in our Earth’s system, with three unique properties: multifunctionality; fertility/ productivity; resilience. In the case of rational land use and precise soil management soil does not disappear, and its desirable „quality” does not decrease considerably, irreversibly and unavoidably. Its renewal, however, requires continuous care and permanent activities.
    Consequently, the prevention, elimination or moderation of soil degradation processes and extreme hydrological situations (the two main factors limiting desirable soil multifunctionality) with rational land use and soil management are the key factors and priority tasks of sustainable development on each level and in each phase of the decisionmaking process.

  • Microbiological quality of bulk tank raw milk from two dairy farms in Hajdú-Bihar County, Hungary
    105-112
    Views:
    641

    Two main channels have been identified to be responsible for microbiological contamination of raw milk and milk products. Firstly, contamination has occurred due to udder infection from the cow or the blood which harbours most bacteria that come in contact with the raw milk. Secondly, via external factors (may include faeces, skin, contaminated water, environment etc.) which are associated with the operation of milking. There is direct contact with the milk and/or surfaces before, during or after the milking, posing public health risk and economic decline. The aim of this study was to examine the bacteriological quality of bulk tank raw milk samples collected from two different size dairy farms (Farm 1 and Farm 2) of different housing forms (cubicle loose and deep litter) in Hajdú-Bihar County, Hungary in July, 2017. Three samples were taken from each farm, and the total plate count, coliform count, Escherichia coli count, Staphylococcus aureus count, and yeast and mould count were determined in them.

    The results clearly showed low level of all measured bacteria group load in Farm 1 samples in comparison to Farm 2 with the exception of coagulase-negative Staphylococcus (CNS) which represented high level in general, indicating significant difference (P<0.05). The mean value of total plate count in Farm 2 samples was higher (1.0 × 105 CFU/mL) than Farm 1 samples (2.8 × 104 CFU/mL). There was a significant difference (P<0.05) in mean count of coliforms in raw milk samples between Farm 1 and Farm 2. Similarly, results of E. coli were significantly different (P<0.05) with mean count of 1.44 × 102 CFU/mL and 2.02 × 103 CFU/mL for Farm 1 and Farm 2 respectively.

    Results of Staphylococcus aureus also showed significant difference (P<0.05) with mean count of 9.7 × 101 CFU/mL for Farm 1 and 6.28 × 102 CFU/mL for Farm 2. The mean of mould count recorded was 1.07 × 102 CFU/mL and 4.93 × 102 CFU/mL for Farm 1 and Farm 2 respectively. The recorded mean of yeast count was 1.68 × 103 CFU/mL and 3.41 × 103 CFU/mL for Farm 1 and Farm 2 respectively; however, both farms showed no significant difference (P>0.05) in terms of mean of mould and yeast count. Although Farm 2 produced six times lower milk quantity than Farm 1, the measured microbial parameters were high. Both farms’ microbiological numbers were higher above the permitted limit values as stated by Regulation (EC) No 853/2004, Hungarian Ministry of Health (MoH) 4/1998 (XI. 11.).

    This could be an indication of non-conformance to effective GMP, ineffective pre–milking disinfection or udder preparation, poor handling and storage practice, time and temperature abuse and inadequate Food Safety Management System Implementation. Therefore, our recommendation is as follows; establish control measures for pre- and postharvest activities involved in the milking process which would be an effective approach to reduce contamination of the raw milk by pathogenic microorganisms from these farms, strict sanitation regime and hygiene protocol be employed and applied to cows, all equipment, contact surfaces and minimize handling of the milk prior, during and after milking. This will also serve as scientific information to the producers for continual improvement in their operations.

  • Heterobeltiosis and combining ability among Egyptian cotton genotypes under well irrigated and water deficit conditions
    5-18
    Views:
    337

    Two field experiments were carried out during the 2014 and 2015 seasons to evaluate certain genotypes of Egyptian cotton under well irrigated and water stress conditions. The cross combination Giza 69 x Australy recorded the best values for better parent heterosis for all physiological measurements and earliness index under well irrigated and deficit conditions. Of the female parents, Giza 86 was found to be a good general combiner for most yield characters under both normal and stress conditions, followed by Giza 94. Data illustrated that Giza 45 was the best general combiner for most fiber quality traits under both conditions. The cross combinations Giza 86 x Dandra and Giza 69 x Pima S6 showed significant positive SCA values for seed cotton and lint yield/plant under well irrigated and water deficit conditions. However, the combinations Giza 77 x PimaS6 and Giza 94 x 10229 recorded significant positive SCA effects for seed cotton yield/plant under stress. Whilst, the cross Giza 68 x 10229 recorded significant desirable SCA effects for most fiber quality properties. In this context, the estimates significant positive general and specific combining ability effects indicated that the epistasis and/or dominance effects for F1 hybrid in cotton could be important to a certain extent.

  • Foliar treatments of Sugar beet
    55-59
    Views:
    383

    The yield and quality of the sugar beet are mainly determined by the plant production system, thus we studied the effect of mineral fertilization. Our field trials were carried out in 2005 and 2006 in Hajdúböszörmény, at two sites. We studied the effect of sulphur (Cosavet DF), copper (Kelcare Cu) and two foliar nutrients with high active agents. Treatments were replicated four times.
    We took root and leaf samples at 4 week intervals, starting in August. The quality of root (sucrose, potassium, sodium and alfaamino N content) was determined from filtrated beet broth, by an automatic beet laboratory system, called VENEMA. Leaf samples were measured with ICP-OES.
    We found that the crop and the sugar yield were significantly influenced by the foliar treatments.