Search
Search Results
-
Does the feeding frequency influence the growth performance of European perch juveniles (Perca fluviatilis) during intensive rearing?
123-128Views:120The European perch (Perca fluviatilis) is a predatory fish species. Its aquaculture production is increasing worldwide. Feeding and the frequency of feeding are important elements of intensive fish rearing. The aim of our experiment was to examine the optimal distribution of the amount of feed, at the same feed rations. The experiment lasted 42 days. Three treatments were applied in 4–4 replications. The first treatment was feeding twice per day (T2), the second treatment was feeding three times a day (T3), and the third group was fed four times a day (T4). 10 European perch juveniles were stocked per tank, with an individual mean body weight of 3.93 ± 0.06 g at the start of the experiment. The survival rate (S%) was above 90% for all treatments. The T2 treatments produced the most favourable harvest weight (13.96 ± 0.14 g) and specific growth rate (SGR = 3.08 ± 0.01% day-1), but no significant differences were observed between groups. In terms of feed conversion ratio, the best result was obtained by (T3) (FCR =1.06 ± 0.18 g g-1), but no significant difference was found for this indicator neither. The results of the trial indicate that the feeding frequency does not influence the production parameters.
-
Physical and chemical treatment of poultry feather from the slaughter-house
51-56Views:65The 15-20% of the by-products of meat – and poultry industry – that unsuitable for human consumption – contains keratin. The slaughter technology of poultry produces large amount of poultry feather with 50-70% moisture content. This means more million tons annually worldwide (Williams et al., 1991; Hegedűs et al., 1998). The keratin content of feather can be difficulty digested, so physical, chemical and/or biological pretreatment is needed in practice, which has to be set according to the utilization method.
Our applied treatments were based on biogas production, which is a possible utilization method. In the IFA (TULLN) Environmental Biotechnology Institute the feather was homogenized, and – according to the previous examinations – the most effective 1:2 feather-distilled water ratio or 1% NaOH-solution was used, and then treated with microwave (70, 130, 160 °C) during 1 hour time period. DM% and oDM% content was analyzed in the original samples, and the pH, Carbon-, Nitrogen-content in the output, too. Based on the received correlation coefficients (R) and related significance values (Sig.) I concluded, that the C-, N-content and the pH values weren’t influenced by any of the additives. The temperature
affected all three tested factors. The temperature showed a strong coherency with the N-content and the pH value when distilled water was used and weak-medium coherency with the Carboncontent. With NaOH-solution treatment the temperature gave strong coherency with the C- and N-content, as well as medium coherency with the pH. Our objective was to determine the method with effectively the pre-treating of poultry feather for biogas production or composting and to prepare of the treated samples for N and C analyzing. Our next aims will be the elaboration of the technological parameters of heat pre-treatment and microbial digestion of poultry feather for biogas production. -
Evaluation of Dairy Farms’ Competitiveness
256-260Views:32The volume of milk production in the European Union is limited by quotas, thus dairy farms in Hungary can expand their production mostly at the others’ expenses after joining. In this way issues of arrangements arise relating to defining competitiveness of the already existing farms and not to farming new ones. The aims of my research is to find answers for dairy farms in the County of Hajdu-Bihar, depending on their arrangement (herd size, keeping technology, arable for forage production, handling manure, mechanisation, technician state of equipment) what possibilities they will have among the EU farmers.
-
Complex problem analysis of the Hungarian milk product chain
43-47Views:90Hungarian dairy sector went through significant changes in past two decades. The most significant changes were caused by our accession to the European Union. In Hungary milk production remarkably declined after EU accession. The size of our dairy herd has been practically reducing since the political transformation, but increasing yields per cow could compensate it in some way and for some time. However, in recent years, increasing yield per cow came to a stop and in parallel, the number of cows declined further and faster. Low prices, high production costs and tightening quality requirements ousted several producers from the market in past years. Feeding cost represents the highest rate in cost structure of production, but animal health expenditures and various losses are also significant. There are undeniably competitive disadvantages in the level of organisation and labour productivity; however competitiveness already depends on cost effectiveness in the medium run. In Hungary concentration of the dairies is relatively strong in spite of the relative high number of corporations. The dairies compete with each other and with the export market for the raw material and the better exploitation of their capacities. Applied technology of the Hungarian dairies lags behind the Western-European competitors’; in addition they have handicaps in efficiency and product innovation. Presence of chain of stores being dominant in sale of milk products does also not favour in all respects to the position of the dairies. The aforementioned retail chains are namely consumer-centric, engage in price follower conduct and weaken the position of the dairies with their private label products. As a result of increasing import of milk and milk products Hungary became a net importer in recent years. Today, disposable income still essentially determines the consumption habits of price-sensitive consumers. Loyalty for Hungarian products is not typical, consumers are open for import products being preferred by retail chains. In addition Hungarian milk and milk product consumption is about half of the Union average and it is far behind the level being necessary for healthy eating. In Hungary lack of competitiveness and vertical integration relationships and backwardness are revealing among the dairy farmers and the dairies, while chain of stores are in unprecedented “monopolistic situation”; the whole sector can be characterised by defencelessness.
-
Assessment of energy generated by biogas production in the educational industrial unit of the University of Szeged, Faculty of Agriculture, with special regard to biomass originating from agriculture and the food industry
137-140Views:78The importance of waste treatment is increasing. Environmental aims are the main driving force. Stricter regulations for landfills lead to the development of alternative treatment methods for waste. For agro-mechanical research, wastes from animal rearing and the food industry, secondary-tertiary biomass, is of deep concern. Available technology is versatile and relatively simple to use as a reliable and effective means of producing a gaseous fuel from various organic waste. The most common application has been the digestion of animal dung, agricultural, and food-industrial waste. This was studied by our department in our pilot farm of our Faculty. The 50-dairy cow, family sized model farm was built in the summer of 1991, as a result of a Dutch – Hungarian cooperation, on the property of the Faculty. The new pig farm, with 30 sows, and the new goat farm, with 100 nannies, was given to the Faculty on 25 April 2001. On the basis of livestock data, the annual dung production and the producible energy were determinate. The energy was calculated by biogas production coefficients in literature.
-
Evaluation of striptillage and conventional tillage in maize production
37-40Views:156Tillage changes soil properties and the way how the environment affects those properties. Soil properties and environment determine the rate of water movement in liquid and gaseous form into and out of soil. Based on the experimental database of the Institute of Land Utilisation, Regional Development and Technology of the University of Debrecen, Faculty of Agricultural and Food Sciences and Environmental Management and the KITE PLC, various cultivation systems were examined with maize (Zea mays L.) as indicator plant in Jász-Nagykun-Szolnok county. The sample area can be found in the outskirts of Kenderes on a meadow chernozem soil. On the examined plot, strip-tillage, subsoiling and moldboard ploughing were performed, each on 4.5 ha, respectively. The purpose of the present study is to compare these cultivation systems according to the soil- and maize kernel moisture content and to the yield based on the years of 2012 and 2013.
-
Pre-treatment of wastes containing keratin in industrial conditions
59-64Views:103The aim of the research was a development of a featherdegradation technology in industrial circumstances. During the experiments we determined the parameters of the critical environmental and technological limitation factors. Because of the high keratin-content the degradation (and composting) of the feather is difficult. With the developed technology huge mass of feather can be used fast and easily in biogas production and in the adjustment of the optimal element ratio of biomass. The industrial experiments were implemented in a 6m3 heatable double-walled
tank with stirring-shovels and aeration-system. The degradation process was followed with extinction measurements.
According to the experiments that were done the best results were given at the case which was heat-treated at 70°C, was injected with 1% bacteria concentration, and where 1:3 feather:water ratio was set if we consider the effectiveness of degradation and the hydraulical retention time. -
A study of product strategy priorities at the small enterprises of the North-Alföld Region
55-64Views:70Through a non-representative sample of the small enterprises of the North-Alföld Region, this paper studies the product strategic priorities enabling us to make a detailed typology of small
enterprises. According to the relevant technical literature, the types of small enterprises have typical strategic priorities. Obviously, each group can be characterised with certain strategic
priorities, which are sharply distinct from each other. These priority features are shown in the form of characteristic features in the enterprise’s marketing activities, market behaviour (product policy, innovation attitude, technology, price policy). This paper studies the enterprises of the sample through the role of production technology, material quality, low price and branding endeavours affecting product positioning. -
Decreasing Energy and Water Use in the Meat Industry
24-28Views:61The technology supervisions are needed from time to time in order to involve the new research results, experience, new technologies and equipments organising principles into the production and to make it cheaper and with less expenditure to increase the profitability and competitiveness. In the course of our investigation we aimed the analysis of the traditional technologies and improving of it. In this article we detail the heat treatment curing process. We applied the principles of experimental design for the determination the main influencing parameters in the processes. Then we made simulations and modelling in seeking for the environmentally better technology programs. We developed a method for measuring the temperature development of products with small diameter using the similarity theory in unit operation. In the course of the analysis of the heat treatment processes we could state that the heat treatment time can be reduced significantly by decreasing the size of the product and choosing the right ratios among the surface heat transfer intensity, ambient temperature and involving the lethality obtained during the cooling phase. The total sparing were about 10-20%. We solved the problem associated with the sensor placement error using a plastic material (metamid). We establish a curve between the real product temperature and plastic rod temperature by which the monitoring of the process became more accurate. We determine the size modification for different product sizes. In case of curing we observed very similar phenomena. For the determination of the diffusion coefficient we adopted the Ball-method not using in this field till today. We could reduce the excess saltiness and loss of NaCl with about 5%.
-
Effects of soil cultivation and environmental changes on maize yield
97-100Views:126We evaluated the relationships among soil cultivation and other agrotechnical factors (fertilization, number of plants and hybrid) within the framework of a multifactorial long-term experiment set at the Látókép Experimental Site of the Centre for Agricultural Sciences of the University of Debrecen in mid-heavy chalcareous chernozem soil based on a long-term experiment conducted for a 5-year period (2002–2006).
Based on the evaluation of soil cultivation by the average of treatments, it may be assessed that spring ploughing (8.204 t ha-1) provides more favourable conditions to the stand compared to spring shallow cultivation; however, this did not result in a significant difference. Spring ploughing considerably increased the yield of hybrid FAO 300 in dry years, whereas it considerably increased the yield of hybrid FAO 400 in favourable crop years. A stand of 70 thousand stems/ha provided the higher yield result in both soil cultivation types. It was sufficient to use a fertilizer dose of 120 kg N ha-1 for economical production.
-
The Examination of Some Determining Elements of Efficient Practical Sweet Corn Growing
81-85Views:123We did the detailed agronomy examination and assessment of sweet corn cropping technology by analysing the data of TONAVAR Ltd. The Ltd. developed a special sowing construction which is based on band application of main sowing and double growing. In main sowing they use super sweet hybrids, and in double growing they use normal sweet varieties. In double growing sugar peas and the sweet corn can be cultivated together successfully. In every two years appearing sugar peas has a good effect on the sweet corn growing in monoculture. At the same time
the long-term successfulness of this questionable onto the illnesses of the peas because of the considerable sensitivity.
According to our examinations in main sowing the optimal period is between May 1. and 30., and in double growing the optimal period of sowing is between June 1. and 20. The optimal plant density is different too for the two sowing time. For super sweet hybrids the optimal plant number is 60-63 thousand/ha and for the normal sweet that is 65 thousand/ha.
Our examinations show that soil pest (defence with soil sterilisation in sowing time), Diabrotica virgifera, Helivoverpa armigera, Ostrinia nubialis are the greatest danger for the sweet corn quantity and quality.
The use of herbicides is the most efficient in the postemergens in main sowing and preemergens in second crop.
Our examination shows that the efficient sweet corn growing cannot be imagined without irrigation. The most efficient irrigation is in main sowing in the critical fenophase of crop time. In double growing the initial irrigation, and the crop irrigation are the most efficient. Based on the production data verifiable that beside the application of the discribed growing technology in the 2005-2007 years the average yield was 20,9t/ha of main sowing, and 17,8t/ha of second crop on chernozem soil in the Hajdúság. -
Agronomical and economic evaluation of various cultivation systems on meadow soil
103-106Views:102The requirements and objectives of cultivation are in constant change. There are different cultivation aims if the objective is soil protection, the prevention of its moisture content or on areas with different precipitation supply or production site endowments. Based on the experimental database of the Institute for Land Utilisation, Regional Development and Technology of the University of Debrecen, Centre for Agricultural and Applied Economic Sciences and the KITE Plc., the various cultivation systems in Hajdú-Bihar country were examined with maize as indicator plant. The sample area can be found in the outskirts of Biharnagybajom on meadow soil. On the examined plot, spring strip basic cultivation, loosening and autumn ploughing were applied on 15-15-15 ha, respectively. At the time of taking undisturbed soil samples, soil conductivity measurements were also performed with a Penetronik penetrometer. Undisturbed soil samples were taken from each treatment before sowing (on 5th April 2012). The yield obtained in the strip cultivation treatment increased that of the ploughing and the loosening technology. The economic indexes are the most favourable in the strip cultivation.
-
Role of some agrotechnical elements in the precision crop technology of cereals
241-244Views:116The crop models and precision technology have an important role in the development of winter wheat and maize agrotechnics, which crops have determinative role in Hungarian crop production. The effects of agrotechnical elements (crop rotation, fertilization, irrigation, crop protection, plant density) were studied in our longterm experiments on chernozem soil. Our scientific results proved that the high yields, and good yield stability were obtained in the input-intensive crop models. Maize had lower ecological adaptive capacity than winter wheat. The optimatization of agrotechnical elements reduces the harmful climatic effects so we can increase the yield and yield stability of cereals agro-ecosystems. The yields of wheat varied between 2 and 7 t ha-1 in extensive and 8 and 10 t ha-1 in intensive crop models and the yields of maize ranged between 2 and 11 t ha-1 and 10 and 15 t ha-1, respectively.
-
Previous data on the relationship between the intensity of pruning and the degree of damage in integrated and organic applegrowing systems
47-52Views:87In Hungary, fruit growers are increasingly interested in environmentally friendly growing methods, such as organic and integrated systems. Vital is the establishment of a strengthened system of cultivar-pruning-plant protection in production technology. Consequently, our aim was to examine the susceptibility of apple cultivars to diseases and pests and the effect of pruning technique on diseases and pests in organic and integrated growing systems.
Two pathogens (Venturia inaequalis, Podosphaera leucotricha) and two pests (Leucoptera malifoliella, Pannonychus ulmi) were observed in organic and integrated systems under „strong” and „weak” pruning techniques. Our results on six cultivars showed that the pathogens and pests infested the trees more in the organic system, as compared to that of integrated production. The pruning technique affected mainly the susceptible
cultivars to diseases and pests. The „weak” pruning technique caused a higher level of diseases and pests infestations than the „strong” pruning technique, especially in the organic growing system. The likely reason is that the shoots grow fast and powerfully under “strong” pruning technique. This supports better preservation of the trees supported by susceptibility of plant tissues to diseases and pests. -
Weed control possibilities of „energy willow” (Salix viminalis L.)
108-112Views:108In Spring 2005, the owner of the Szalka-Pig Ltd. of Mateszalka, decided to import the willow species Salix viminalis L. and to create a plantation for energy production purposes on the humid arable lands in his ownership. In 2006, he enlarged this area by 43 hectares. The owner further decided not only to plant this species on the more adherent (KA 70), but also onto the incoherent structured sand (KA 30-35). His main argument was that the cost of coal tar derivatives as energy sources was rapidly increasing in Hungary, so he needed to find a cheaper energy source for the drying of his products and for the heating of his buildings. He also planned to change his gas and oil heating equipment.
The willow’s cropping technology is being established in our country. One of our tasks is to work out an adequate weed control plan. The professional and safe use of herbicides can increase the success of production. In our paper, we discuss the data collected on treatments applied in the pre-emergent stage. The applied herbicide combinations (terbutilazin+S-metolaklór, mezotrion+ S-metolaklór, pendimetalin+S-metolaklór, oxyfluorfen+ S-metolaklór) yielded good results in large scale experiments. -
Harmonic development and biodiesel
91-95Views:76An increased expansion of renewable resources and biodiesel is observed and prognosed, since fossile energy resources are about to run out. Hungary achieved outstanding sunflower years in the recent years in worldwide comparison. In the future, the feedstock of biodiesel production can also be rape besides sunflower.
According to the concept of harmonious development, the balance between nature, society, economy and human environments is represented by their mutual presumptive character. Research and development need to be aligned into this system. Our aim was to examine the advantages and
disadvantages of biodiesel production in different environments, using a model to do so. In order to maintain the harmony, the existing resources have to be managed properly, taking the correlations of the system into consideration. Targeted technological developments are necessary, similarly to the improvement of energy safety and efficiency. -
Biofuel production and its quality standards
137-141Views:110The increasing consumption due to the decreasing amount of fossile energy resources, as well as the increasing fuel prices and living standard will justify the better utilisation of the opportunities lying in biofuel production. Certain countries produce biofuels for their own use or they even export them. However, there are countries which have not decided which feedstock and technology to use. Biofuel – mainly biodiesel and bioethanol – use greatly contributes to environmental protection, decreased CO2 emission and reduced greenhouse effect.
-
Biomethane production monitoring and data analysis based on the practical operation experiences of an innovative power-to-gas benchscale prototype
399-410Views:351Power-to-gas (P2G) is referred to technologies that convert carbon dioxide into methane. Both bio- and chemical catalysts may be used for conversion purposes. One of the most disruptive biotechnologies was developed by the University of Chicago (IL) (publication number: EP2661511B1), using a robust, highly selective, patented strain of Archaea. Electrochaea GmbH has developed an innovative bench-scale P2G prototype unit, which uses this highly efficient Archaea strain, specialized components and specifically developed control strategies. The structure and the components of the prototype are equivalent with the functional parts of the currently largest commercial scale biomethanation BioCat plant located in Avedøre, Denmark (www.biocat-project.com). Power-to-Gas Hungary Kft. has committed to further develop this innovative technology. The first steps of this development have been taken by operating the benchscale unit and analyzing the data of the operating periods.
The prototype is operated based on weekly campaigns. During continuous operation, H2O is generated as a by-product of methane. Therefore, approximately 200 ml of biocatalyst is discharged each day and concentrated media containing macro and micronutrients are injected into the reactor to maintain media composition. The laboratory staff records all gas composition data each morning. The gas composition is measured every 12 minutes by an Awite AwiFlex Cool+ gas analyzer. Within this article, we analyze the collected datasets containing more than 12 000 records and present the first practical experiences of the operations of the innovative power-to-gas bench-scale prototype.
The analysis of the collected gas composition data of the product gas already provides important data for modelling the commercial-scaled processes. The average value of VVD was about 40 l/l/d in the period under review. Further increase of the methane content can be achieved by introduction of higher mixing energy and by increasing pressure levels in the bioreactor (as demonstrated in the BioCat plant – data not shown here) – both of which are strategies envisioned for the commercial plant. In routine activities (turn on, shut down, continuous operation) we could verify the high robustness of the biocatalyst and the base connection between the registered datasets and performed test results.
-
Determining elements of variety-specific maize production technology
157-161Views:62Our aim was to work out such new maize fertilizer methods and models which can reduce the harmful effects of fertilization, can
maintain the soil fertility and can moderate the yield fluctuation (nowadays 50-60 %).
The soil of our experimental projects was meadow soil. The soil could be characterized by high clay content and pour phosphorus and
medium potassium contents. In the last decade, out of ten years six years were dry and hot in our region. So the importance of crop-rotation
is increasing and we have to strive for using the appropriate crop rotation.
The yields of maize in monoculture crop rotation decreased by 1-3 t ha-1 in each dry year during the experiment (1983, 1990, 1992,
1993, 1994, 1995, 1998, 2000, 2003, and 2007). The most favourable forecrop of maize was wheat, medium was the biculture crop rotation
and the worst crop rotation was the monoculture.
There is a strong correlation between the sowing time and the yield of maize hybrids, but this interactive effect can be modified by the
amount and distribution of precipitation in the vegetation period. At the early sowing time, the grain moistures were 5-12 % lower compared
to the late sowing time and 4-5 % lower compared to the optimum sowing treatment.
There are great differences among the plant density of different maize hybrids. There are hybrids sensitive to higher plant density and
there are hybrids with wide and narrow optimum plant densities.
The agro-ecological optimum fertilizer dosage of hybrids with a longer season (FAO 400-500) was N 30-40 kg ha-1 higher in favourable
years as compared to early hybrids.
We can summarize our results by saying that we have to use hybrid-specific technologies in maize production. In the future, we have to
increase the level of inputs and have to apply the best appropriate hybrids and with respect to the agroecologial conditions, we can better
utilize the genetic yield potential. -
Effect of sowing technology on the yield and harvest grain moisture content of maize (Zea mays L.) hybrids with different genotypes
17-22Views:118From the aspect of the efficiency of maize production harvest grain moisture content shall be considered beside the amount of harvested grain yield. Hybrids with different genotypes and vegetation period length lose their moisture content different that is affected by row spacing and plant density – among agrotechnical production factors – depending on the given crop year. In the present research work three crop years with different weather conditions were studied (2013, 2014, and 2015). The small-plot field experiment was set up at the Látókép Field Research Centre of the University of Debrecen, Centre for Agricultural Sciences with four replications on a chernozem soil type. The effect of three factors was analysed in the experiment on yield amount and its moisture content. Factors were row spacing (45 and 76 cm), plant density (50, 70 and 90 thousand plants ha-1), while hybrids were of very early (Sarolta: FAO 290), early (DKC 4014: FAO 320, P 9175: FAO 330, P 9494: FAO 390) and medium (SY Afinity: FAO 470) ripening.
In the crop year of 2013 the highest yield was produced – regarding the average of the hybrids – by the application of a row spacing of 45 cm (4.5%, 673 kg ha-1), however there was no significant difference between the yield of the populations of different row spacings. Significant difference (14.9%, 1751 kg ha-1; 6.3%, 583 kg ha-1) could be found in case of yield between different row spacing applications in 2014 and 2015. The effect of insufficiently distributed low amount of precipitation and lasting heat days in 2015 could be revealed in yield amounts and harvest grain yield moisture content results that were lower than in the previous years. In 2015 grain yield moisture content varied between 10.3 and 13.9% in case of a row spacing of 45 cm, while by 76 cm between 11.0 and 13.9%.
-
Effects of Tillage Systems on Physical Status and Organic Matter Turnover of the Soil
42-45Views:154The cultivation technology for those plant, that play a key role in arable land production need to be renewed in order to reduce production costs and to protect arable land. The modernisation of technologies can only be achieved by applying appropriate tillage systems. Our measurements were carried out on chernozem soil with lime deposits at the Látókép Experimental Station of the Center for Agricultural Sciences, Debrecen University, in long term tillage experiments set up in 1989. We examined the typical physical parameters, the albedo, field capacity, the bulk density of the soil, organic carbon content (humus %) and the measured pH-values in the water solution within the two tillage variations. We have also modelled nitrogen cycle formation in different treatments.
A significant difference occured between the albedos of the two soils, which may be the result of significant amounts of stem remaining on the surface in the case of the reduced tillage method. The yellow, waxy stem of maize reflects 21% of the sun’s rays, especially at the beginning of the vegetation period, when its decomposition has only just started. This delys the warming up in early spring, which delays the sowing time of maize and reduces evaporation. In the two tillage variations, the water management characteristics do not differ practically, the wilting point field capacity are in accordance. In reduced tillage methods, the so-called „plough-pan” can be well measured at 15-20 cm, while in winter ploughing it is at 30 cm. The humus % of the soil does not differ in the two tillage variations, but due to the difference in bulk density this means a different humus and organic nitrogen content. The organic nitrogen content is greater in the reduced tillage method. On the basis of pH value evaluations, we could not detect significant differences in the two tillage variations. The organic nitrogen content of areas where reduced tillage method was applied is higher than in areas where conventional winter ploughing was applied. -
Examination of the conditions of extreme water balance circumstances (water logging, drought) with environmental information technology tools
79-86Views:185The Carpathian Basin is characterized by varying hydrological extremes, both in space and time. Hungary's natural endowments are more favourable than average, especially for agricultural production, with 5,3 million hectares of land we have which is suitable for agricultural production. These extreme water management are often occur in the same year and mostly in the same region, which may become more frequent in the future, especially in the lowland regions. The negative impacts of extreme water management was influenced by the land use changes in recent years, which has modified the runoff processes of the affected regions.
The aim of the study was to research the formation of inland water and drought circumstances in two sample areas the Great Plain (Szolnok-Túri flat and Nyírség) by geoinformatic tools. During the investigation in the first step we determined that areas which are susceptible to inland water and drought, based on the AGROTOPO database. In addition, land-use categories of characteristics of the sample areas are evaluated according to the Corine Land Cover. Furthermore, after defining characteristic of NDVI values between the period of 2003–2013, we evaluated the effect of drought whether can be detected in crop failures in respective areas.
Based on our results, we concluded that the formation of inland water and drought circumstances can be investigated in a large spatial extension by geoinformatic tools and databases.
-
Local strategical tasks in the Hungarian fruit production with respect to the global economic and climatic changes
39-34Views:91After identifying the problems, we have determined the local tasks which Hungarian fruit growing has to accomplish to remain competitive despite global market pressures and global climate change.
Fruit growing in the Great Plain is of determining importance in Hungary as 75% of fruit originates from the Great Plain. Therefore, the maintenance of the competitiveness of fruit growing on the Great Plain is an important economic interest which is a difficult task to resolve, because the global economic pressure against local resources and climate change affect the fruit growers sensitively.
In Hungarian fruit production, it is necessary to select/develop with great care the appropriate location, training system and methods of emergency technology which have to be harmonised. -
Examination of the impact of sowing technology models on the ear, constiuent and yield parameters of the yield formation elements of maize hybrids of different genotypes
17-23Views:109Production year 2012 has been characterised by climatic extremities. The weather of this year can be considered very contradictory in terms of maize production. The droughty conditions of the winter and spring months had a negative effect on both germination and starting vigour. The favourable weather of May-July created ideal conditions for intensive growth and generative processes; however the lack of precipitation in August and September had a damaging effect on the development of yield composing elements and grain saturation processes as well. Under such circumstances, the sowing date models caused significant differences in the yield and quality of the hybrids belonging to different growth periods. The growing period of the maize hybrids has been shortened as a result of the unfavourable climatic conditions.
Based on the trial results, it is verifiable that short growing period hybrids can be securely sown in draughty years even with a later sowing date, however using a later sowing date in the case of longer growth period hybrids may result even in a yield loss of 2–3 t ha-1. In the case of early and average sowing dates, with given yearly conditions the hybrids of the observed FAO 370-390 hybrid group provided the best result (12.40 t ha-1, 10.99 t ha-1), while in the case of the third, late sowing date the yield dominance of the FAO 290-350 hybrid group is the most significant (10.08 t ha-1).
The analysis of the yield composing elements found that the P9578 hybrid has the highest shelling ratio, while its cob is the shortest. The P9494 hybrid has a high yield and the highest thousand grain weight, while the DKC 4983 has the longest cob and its thousand grain weight is above 300 g.
The results confirm the fact that DKC 4590 has the highest yield potential and starch content, while in terms of oil and protein content the Szegedi 386 and NK Octet hybrids are the most important.
-
The effect of crop protection and agrotechnical factors on sunflower in the Hajdúság region
39-46Views:79Extreme weather conditions are becoming more and more frequent in the crop years, thus increase the risk of sunflower production.
The objective of researches into plant production is to minimize these effects as much as possible. In this sense, the optimization of
agrotechnological factors is of high importance. Within these factors, the appropriate crop technology (sowing time, crop density)
and optimized, rational crop protection technologies are important, especially in the highly sensitive sunflower cultures. The effect of
sowing time, crop density, and fungicide treatments on the yield of sunflower hybrids was analysed in different crop years in 2008
and 2009. In each case, the infection was highest with the early sowing time and at the highest crop density level (65000 ha-1). When
one fungicide treatment was applied, the rate of infection decreased compared to the control treatment. The further decrease of the
infection rate was less after the second fungicide treatment.
In the humid year of 2008 the crop yield was the highest at 45000 ha-1 crop density level in the control treatment and at 55000 crop
ha-1 crop density level when fungicides were applied. In the draughty year of 2009 the maximum yield was gained at 55000 ha-1 crop
density level in the control treatment and at 65000 crop ha-1 when fungicides were applied. In 2008 and 2009 as regards the crop
yield, the difference between the optimal and minimal crop density levels was higher in the fungicide treatments than in the control
treatment (in 2008: control: 517 kg ha-1; one application of fungicides: 865 kg ha-1; two applications of fungicides: 842 kg ha-1), (in
2009: control: 577 kg ha-1; one application of fungicides: 761 kg ha-1; two applications of fungicides: 905 kg ha-1).
In each and every case, the first treatment with fungicides was more effective than the second. In 2008, the highest yield was
obtained with the third, late sowing time in each fungicide treatment. The differences between the crop yields with different sowing
times was less than in 2009, when the results of the second treatment exceeded those of the first and third treatment in each case.