Search
Search Results
-
Cytochrome b diversity of Hungarian Botrytis cinerea strains
18-21Views:91In the mitochondrion of eukaryotes, cytochrome b is a component of respiratory chain complex III. Cytochrome b is encoded by the
cytochrome b (CYTB) gene located in the mitochondrial genome. The fungicidal activity of QoIs relies on their ability to inhibit mitochondrial respiration by binding at the so-called Qo site (the outer quinol-oxidation site) of the complex III. Since their introduction, QoIs (like azoxystrobin) have become essential components of plant disease control programs because of their wide-ranging efficacy against many agriculturally important fungal diseases like grey mould on various crops. QoI resistance primarily arises from a target-site-based mechanism involving mutations in the mitochondrial CYTB. As the management of grey mould is often dependent on chemicals, the rational design of control programs requires the information about the diversity of genes connected with resistance in field populations of the pathogen.
Monospore B. cinerea field isolates has been collected during 2008-2009 from different hosts in Hungary. PCR fragment length analysis
indicated the high frequency presence of type large intron in the isolates while in a few strains G143A substitution could also be detected.
These results indicated the heterogeneity of CYTB in the Hungarian B. cinerea populations, which possibly involve the heteroplasmy of this
mitochondrial gene, moreover indicates the existence op azoxystrobin resistant populations in Hungary.
This work was supported by NKFP-A2-2006/0017 grant. Erzsébet Fekete is a grantee of the János Bolyai Scholarship (BO/00519/09/8). -
The effect of sowing date and plant density on the yield of maize (Zea mays L.) under different weather conditions
205-208Views:276Maize has high productivity and produces huge vegetative and generative phytomass, but this crop is very sensitive to agroecological (mainly to climatic, partly to pedological conditions) and agrotechnical circumstances. In Hungary, maize is grown on 1.1–1.2 million hectares, the national average yields vary between 4–7 t ha-1 depending on the year and the intensity of production technology. The longterm experiment was set up in 2015–2016 on chernozem soil in the Hajdúság (eastern Hungary). The maize research was set up on chernozem soil at the Látókép MÉK (Faculty of Agricultural and Food Sciences and Environmental Management) research area of the University of Debrecen. We examined the following commonly used hybrids of Hungary: SY ARIOSO (FAO 300), P9074 (FAO 310), P9486 (FAO 360), SY Octavius (FAO 400), GK Kenéz (FAO 410), DKC 4943 (FAO 410). The experiment was set up in three different plant densities. These were 60, 76, 90 thousand plant ha-1. The experiment was set up with three different sowing dates, early, average and late sowing. The yield was measured using a special plot harvester (Sampo Rosenlew 2010), measuring the weight of the harvested plot and also taking a sample from it. As a next step, we calculated the yield (t ha-1) of each plot at 14% of moisture content to compare them to each other. We evaluated the obtained data using Microsoft Excel 2015.
-
The effect of NPK fertilization and the plant density on maize yield and bioethanol production
13-18Views:88For industrial (bioethanol) production of maize, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2008.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance. -
Host plant preference of Metcalfa pruinosa (Say, 1830) (Hemiptera: Flatidae) in the north of Hungary
84-95Views:214Citrus flatid planthopper, a native insect to North America had for a long time a scarce economic importance there. However, being polyphagous made little damage on citrus trees and some ornamentals. In 1979 it was introduced to Italy where it established and spread quickly. It is now an invasive alien species continually spreading in South and Central Europe causing considerable damage in fruit crops and various ornamentals. Present study shows the results of a series of observations carried out from 2011 to 2015 at a number of habitats in north of Hungary. The pest could be found at each habitat but the hedge, the tree row, the gardens and the orchard/vineyard were the most infested. Frequency and population density of Metcalfa pruinosa were considerable on Asteraceae, Cannabaceae, Fabaceae, Juglandaceae, Lamiaceae, Rosaceae and Sapindaceae. Typical vegetation could be functionally classified as ornamental plants, trees/shrubs, fruit plants, weeds and feral plants. Feral plants – some of them also invasive alien species – were found at each habitat. Plant species native to America were among them the most populated. As the hedgerows were neglected, and most gardens, orchards and vineyards abandoned, these are excellent conditions for the quick and long-lasting establishment of the pest as well as they may be reservoirs to infest cultivated fruit crops and ornamentals. The hedgerow was situated along a railway line. The length of similar hedges can be merely in Pest county several hundred km, which means M. pruinosa has plenty of opportunity for spreading along the railway and infest agricultural and ornamental cultures. On the surveyed alfalfa and maize fields, accidentally very few nymphs and adults were observed. Although, the population density of M. pruinosa was considerable on many hostplants, economic damage or yield losses could not be detected. Economic or significant damage was observed only on roses, raspberries and stinging nettle. This later is cultivated in Germany and Finland. The applied horticultural oil was efficient.
-
The effect of dissolved oxygen on common carp (Cyprinus carpio) and basil (Ocimum basilicum) in the aquaponics system
89-96Views:275Aquaponics is an integrated system that combines fish farming (aquaculture) and hydroponic plant production. The objective of this study was to examine how the level of dissolved oxygen with or without an air pump affects water quality, fish output and plant growth parameters for common carp (Cyprinus carpio) and basil (Ocimum basilicum).
Ebb – and flood aquaponics systems (with automatic syphon) was used. Two treatments were set in this experiment, one of which was the aquaponics system without air pump (unit I), where water of the plant bed was pumped two directions, one falling back to the fish tank oxygenating the water the other was pumped to the hydroponics unit. The other system (unit II) was designed with an air pump.
In the course of the study, water quality parameters, such as oxygen saturation, dissolved oxygen (DO), electrical conductivity (EC) and nitrite were significantly different (p<0.05). Total basil biomass was higher in unit II. (5367.41 g). The final biomass of common carp were
2829.45 g ± 79.24 and 2980.6 g ± 64.13 g in unit I and unit II respectively. Weight gain (WG) and specific growth rate (SGR) showed no significant differences (p>0.05) between the treatments. -
Estabilishing Plant Production Systems by Optimising the Crop Structure
82-84Views:61In our days, ecologiacal and economic models of agricultural application are of ever increasing significance. These provide an opportunity for more accurate planning, and thus can favourably influence the efficiency and the economic situation of the given enterprise. The relevant literature divides models according to various criteria. The most common is the division between optimising and non-optimising models. Non-olptimising models generally endeavour to make the best use of technological lines, of machine capacity, while optimising models are used to optimise revenues returns from sales; or occasionally, production costs. In our case revenue and returns from sales were optimised. The models examined consists of several modules. These are the following: plant cultivation modules, evaluations (assessment of situation, conception plan, complex corporate evaluation), supplementary sheets (sheets and charts for ancillary plant production, general costs of operation, summary and crops structure optimisation). With the help of the model annual plans of plant cultivation can be made an optimal crop structure may be planned with the resources of the enterprise taken into consideration, and thereby it becomes possible to define the largest net revenue on a corporate level.
-
Evaluation of chickpea (Cicer arietinum L.) in response to salinity stress
105-110Views:202Soil salinity is a severe and expanding soil degradation problem that affects 80 million ha of arable lands globally. Chickpea (Cicer arietinum L.) is very sensitive to saline conditions; the most susceptible genotypes may die in just 25 mM NaCl in hydroponics. Approximately 8–10% yield loss in chickpea production is estimated due to salinity stress. However, it is still not established why chickpea is so susceptible to salt affection. Salinity (NaCl) impedes germination of seeds, though chickpea varieties considerably differ from one another in this respect. Some chickpea genotypes are more tolerant in the stage of germination, tolerating even 320 mM NaCl. The reasons of this variation are unrevealed; there is a shortage of knowledge about the germination abilities of chickpea genotypes in saline conditions. Nevertheless, the effect of salt stress on vegetative growth can be analysed in hydroponics, in pot or field conditions, regardless the experimental environment, the ranking of genotypes regarding salt resistance is coherent. Chickpea genotypes can be different in their ability to retain water, maybe under salt affection; the more salt tolerant lines can maintain higher water content in the shoots, while the more sensitive ones cannot. The identification of salt tolerant chickpea landraces based on developing genetic variability is a suitable strategy to combat against salinity problems arising in arid and semi-arid areas.
-
Spatially Discrete GIS Analysis of Sampling Points Based on Yield and Quality Analysis of Sugar Beet (Beta vulgaris L.)
32-37Views:74Fulfilment of the increasing quality requirements of sugar beet production can be analysed with sampling of plants and soil at the cultivated area. Analyses of the spatial characteristics of samples require exact geodetic positioning. This is applied in practice using GPS in precision agriculture. The examinations were made in a sample area located in north-western Hungary with sugar beet test plant. According to the traditional sample taking procedure N=60 samples were taken in regular 20 x 20 m grid, where besides the plant micro and macro elements, the sugar industrial quality parameters (Equations 1-2) and the agro-chemical parameters of soils were analysed. Till now, to gain values of mean, weighted mean and standard variance values, geometric analogues used in geography were adapted, which correspond to the mean centre (Equation 3), the spatially weighted mean centre (Equation 4), the standard distance (Equation 5), and the standard distance circle values. Robust spatial statistical values provide abstractions, which can be visually estimated immediately, and applied to analyse several parameters in parallel or in time series (Figure 1). This interpretation technique considers the spatial position of each point to another individually (distance and direction), and the value of the plant and soil parameters. Mapping the sample area in GIS environment, the coordinates of the spatially weighted mean centre values of the measured plant and soil parameters correlated to the mean centre values showed a northwest direction. Exceptions were the total salt and calcium-carbonate contents, and the molybdenum concentration of the soil samples (Table 1). As a new visual analysis, the spatially weighted mean centre values of the parameters as eigenvectors were projected to the mean centre values as origin. To characterize the production yield, the raw and digested sugar contents of the sample area, the absolute rotation angles of the generated vectors were determined, which indicate numerically the inhomogenity of the area (Figure 2). The generated spatial analogues are applicable to characterise visually and quantitatively the spatial positions of sampling points and the measured parameters in a quick way. However, their disadvantage is that they do not provide information on the tightness and direction of the spatial correlation similarly to the original statistical parameters.
-
Using research findings in precision maize production
227-231Views:195The effect of crop production factors on maize yield are examined on chernozem soil in a more than 30 year old long-term experiment on the Látókép Experiment Site of the Centre for Agricultural and Applied Economic Sciences of the University of Debrecen. The aim of research is to evaluate the effect of fertilisation, cultivation, plant number, genorype and irrigation. The analysis of the data in the database of the examined period makes it possible to evaluate the effect of maize yield, as well as that of the crop production factors and the crop year, while the correlations and interactions between these factors were also examined. During the examination of the cultivation treatments, it was concluded that the highest yield was obtained as a result of autumn ploughing, but its effect largely differs in the irrigated and the nonirrigated treatments. Based on our examinations, strip cultivation should be applied periodically (e.g. strip – strip – ploughing – loosening) in areas with favourable soil conditions free from compacted layers.
In years with smaller, average precipitation supply or when the precipitation was higher than average, higher plant numbers were more favourable. Under drier conditions, but especially in several consecutively dry years, a lower plant number can be recommended which is not higher than 60 thousand per hectare. In the case of favourable water supply, 70-80 thousand plants per hectare can be used. The yield increasing effect of fertilisation was significant in the case of both non-irrigated and irrigated conditions, but it was much more moderate in the non-irrigated treatment. The extent of weed coverage was significantly affected by the previous crop. In the case of a favourable previous crop (wheat), the weed coverage was significantly lower than after an unfavourable previous crop (maize). In the case of the same previous crop (maize), the extent of weed coverage was mostly determined by the crop year and the extent of precipitation supply. Irrigation is not enough in itself, because if it was not accompanied by intensive nutrient management, yields started to decline.
The results of researhc, development and innovation contributed to the technological method which makes it possible to apply locally adjusted sowing seed, fertiliser and pesticide in a differentiated way, as well as to change the method of operations within the given plot. -
Determining elements of variety-specific maize production technology
157-161Views:62Our aim was to work out such new maize fertilizer methods and models which can reduce the harmful effects of fertilization, can
maintain the soil fertility and can moderate the yield fluctuation (nowadays 50-60 %).
The soil of our experimental projects was meadow soil. The soil could be characterized by high clay content and pour phosphorus and
medium potassium contents. In the last decade, out of ten years six years were dry and hot in our region. So the importance of crop-rotation
is increasing and we have to strive for using the appropriate crop rotation.
The yields of maize in monoculture crop rotation decreased by 1-3 t ha-1 in each dry year during the experiment (1983, 1990, 1992,
1993, 1994, 1995, 1998, 2000, 2003, and 2007). The most favourable forecrop of maize was wheat, medium was the biculture crop rotation
and the worst crop rotation was the monoculture.
There is a strong correlation between the sowing time and the yield of maize hybrids, but this interactive effect can be modified by the
amount and distribution of precipitation in the vegetation period. At the early sowing time, the grain moistures were 5-12 % lower compared
to the late sowing time and 4-5 % lower compared to the optimum sowing treatment.
There are great differences among the plant density of different maize hybrids. There are hybrids sensitive to higher plant density and
there are hybrids with wide and narrow optimum plant densities.
The agro-ecological optimum fertilizer dosage of hybrids with a longer season (FAO 400-500) was N 30-40 kg ha-1 higher in favourable
years as compared to early hybrids.
We can summarize our results by saying that we have to use hybrid-specific technologies in maize production. In the future, we have to
increase the level of inputs and have to apply the best appropriate hybrids and with respect to the agroecologial conditions, we can better
utilize the genetic yield potential. -
Supplementary botanical examinations for modelling the grass production of the great pasture of Hajdúbagos
17-21Views:59Our botanical survey at the great pasture of Hajdúbagos is a part of a broad research that aims to predict the production of the grass at the given area. As the mentioned pasture is a nature conservation area, the usage of artificial fertilizers or other classic grassland management methods in its handling are prohibited. Thus grazing is an important tool for the management of this area, however the not suitably regulated grazing order and the poorly calculated carrying capacity cause serious problems at some parts of the pasture. The prediction of the grass yield is essential to
avoid both over- and both under-grazing and for determining the optimal number of the grazing animal stock and the grazing method, thus the most suitable management strategy.
The potential grass yield is easily calculable with a computer model that will be established as a basis for determining the grass production. For the sake of getting an accurate view of the plant associations of the pasture, we created examination quadrates and determined all plant species found in the quadrates. After plant determination, we compiled a coenological table in which we marked besides the scientific name and families, the life forms of each species that refer to the structure, morphology and thus the adaptability of plants to their environment. We determined the
TWR, so the thermoclimate, water and soil reaction values, the nature conservation values, as well as the covering values of each plant species (DB), and the total coverage of the examination quadrates (B%).
According to the covering values, grasses proved to be characteristic plants at the examined pasture, thus we need to consider them influential in calculating the animal carrying capacity and with the rest of the information, we need to supply the model.
The life forms and TWR indicators, all together with the nature conservation values provide further important data to the development of the management suggestion of the protected pasture. By examining these values to different parts of the area, we could get an exact view on the measure of the degradation effects. This promotes the determination of grazing methods and the forming of the boundaries of certain pasture sections, to avoid those harmful anthropogenic effects that seriously endanger this extensive sandy pasture. -
Review of the biology of plant psyllid (Cacopsylla pruni, Scopoli 1763), and its role in the spreading of European stone fruit yellows, ESFY-phytoplasma with Hungarian data
25-33Views:295The European stone fruit yellows (ESFY) phytoplasma disease caused by pathogen ’Ca. Phytoplasma prunorum’ induces serious damages in cherry, sour cherry, peach, and apricot orchards mostly in Europe. Its known vector is the plum psyllid (Cacopsylla pruni). Many articles report on the biology (morphology, taxonomy, life cycle etc.) and the method of transmission of the pathogen by the vector, and the possibilities of their control. This paper reviews our knowledge about the vector, and summarises the results of an inland research carried out in a northeastern Hungarian apricot orchards. Our goal was to show some important data for the farmers or anyone who is interested in this disease and its vector. And give some known method that we can protect our orchards against them to prevent the appearance of the disease. As the psyllid that became infected with the pathogen can hold its infectionous capacity during their lifetime, it is very important to have enough knowledge about their lifecycle, that we can determine the right time and method to control them. We also have to know how to identify them; therefore, this paper lists several important data which can be helpful. The most important keys of identification are their wing color, which dark borwn in the apex and brown is in the remaining part of the forewing. The length of the antennae is also an important factor, since other genuse’s species have longer antennae than twice the width of the head. C. pruni has as long antennae as twice the width of the head. They return to Prunus species in early spring and we have to protect our orhards in this period against them. We have to use preparations with a knock down effect on them to prevent the inoculation of the pathogen into the trees in our orchards.
-
Arrival of invasive pests in our direct environment and control opportunities
23-26Views:233The author refers about the nowadays applied practical plant protection activities against pests occuring on trees, shrubs and turfs of public domains. It is overviewed those insects, diseases and weeds which cause damages and touched also upon disturbing the local residents only and tasks to the plant protection engineer expert to manage them. Among the special features of public domains should be mentioned that the rules are difficult to harmonize according to the legal, public health, and horticulture requirements at the same time. The anti-pesticide attitude of EU and the modest range of pesticides which are applicable on public domains make difficulties in optimal management work. The author draws up proposals how to manage the complex plant protection on public domains.
-
Studies of the effects of N fertilizers and Microbion UNC biofertilizer on microelement content of horseradish (Armoracia macrocarpa)
41-45Views:115A field experiment on calcareous chernozem soil was performed to study the effects of different N and bacterial fertilizers on the nutrient content of horseradish (Armoracia macrocarpa). In the experiment the trials were arranged in a randomized block design with three replications, applying three levels of NH4NO3 and different N fertilizers, namely ammonium-nitrate, urea and calcium-nitrate, with or without application of Microbion UNC biofertilizer.
In the present paper the changes and distribution of manganese, zinc and copper contents of the horseradish plant are summarized by the
effect of different treatments.
The Mn content of leaves were higher in all cases than those of roots, but Zn mainly accumulated in the roots. The distribution of copper within the horseradish plant was more equalized than that of Zn and Mn. Different N fertilizers and increasing doses of ammonium-nitrate had effects mainly on the microelement contents of leaves. The highest Mn contents of plant were measured in treatments of Ca(NO3)2 and Ca(NO3)2+Microbion. The lowest ammonium nitrate dose (N1) decreased the Mn content of leaves compared to control, but further doses
(N2, N3) did not alter these values any longer. Microbion UNC biofertilizer did not have any effect on the Mn content of roots, but we measured higher Mn in leaves in some combined treatments. Ca(NO3)2 increased the zinc content in leaves and roots in a noticable manner. With the increasing of NH4NO3 doses, the Zn content of leaves and roots augmented significantly. Neither N fertilizers (or the increasing doses of NH4NO3) nor the biofertilizer application influenced the Cu content of horseradish plant.
N fertilizers had higher effects on the microelement content of horseradish, the biofertilizer’s effect was smaller and was not the same in every treatment. -
Application of GIS, precision agriculture and unplugging cultivation in plant breeding of Karcag
49-56Views:151In the last two decades, the prevailing ecological conditions and climate change have caused negative effects. Therefore, a paradigm shift is needed in the field growing of plants. The latest inventions, digital technologies, precision cultivation are not enough, the mentality of the farmers is more important. For this reason, not only big financial sacrifices, but adequate receptivity are needed on behalf of farmers. Adequate skills and continuous self-education are necessary. The yield of plant growing farms is determined by ecological conditions to a 40% extent, genetic background of the seed has a 30% share and the applied agricultural technology has a proportion of 30%. In different agroecological conditions, bred varieties of plants have bigger tolerance to unfavorable factors of the regions and significant yield stability. Farmers, who buy and sow seeds, can only contribute to the genetic potential of the seeds with cultivation technology. Plant breeding provides stable genetic background and good quality seeds. Breeding activity – choosing variety proposants, breeding them, selection work, classical breeding process for 8-10 years – must create new landraces, which can produce balance, high yield and have good quality parameters in extreme ecological conditions, yearly excursion and have higher tolerance to unfavorable factors of the region giving significant production stability for farmers. In Karcag GIS technology, precision cultivation elements and soil-friendly agrotechnical methods have been introduced which largely support the aims of breeding and can also provide optimal cultivation conditions in extreme years. Because of the specificity of breeding the main aim is not only to increase yield but to provide harmonic growing for bred materials, to decrease the number and the cost of cultivation and to be punctual. In this study, applied new methods and technologies are introduced.
-
The examination of relation between the C/N ratio and the biogas yields in the Regional Biogas Plant of Nyírbátor
63-68Views:83The Regional Biogas Plant of Nyírbátor was built by the Bátortrade Ltd. The biogas plant contains 6 mezophil and 6 thermophil fermentation tanks, because the biogas production is based on mixed compositions. The regional plant is a multifunctional system. It produces agricultural products and biogas with high methane content. The utilization of biogas is also accomplished here; gas-engines transform it to electricity and
heat-energy. The product electricity is used by the local plants, the surplus is sold.
The aim of the research is the examination of the quality and quantity of the input materials that put into the mixers and follow the seasonal, periodical and optional changes of the input materials. The analyzation of the quality and quantity data can give an answer to the optional changes of biogas production because the input materials determine the composition of the examined recipe. The C/N ratio was between 11-13, the maximal value of the biogas yield was observed by 12.35 C/N ratio. -
The effect of different bacterial fertilizers on the AL-soluble P2O5 content of soil, and the biomass of the rye-grass (Lolium perenne, L)
93-98Views:187In pot experiment the effect of different bacterial fertilizers on some soil properties, and the amount of plant biomass were studied. The
experiment was set up in 2010 at the Department of Soil Science and Agricultural Chemistry, in a three replications in a random block design. The ryegrass (Lolium perenne, L.) was used as a test plant. The studied soil type was calcareous chernosem soil from Látókép. In our laboratory AL-soluble P2O5 content of soil, the phosphatase enzyme activityof soil, the dry weight of rye-grass, and the phosphorus content of rye-grass were determined.
The results of the study were the following:
– The bacterial fertilizers - by basic treatments NPK - had significant positive effect on the AL- soluble phosphorus content of the soil.
– The soil phosphatase enzyme activity was increased in all cases strongly by the microbial preparations used, the greatest impact was the Bactofil A bacterial fertilizer.
– The plant educed P values significantly increased by the effect of microbial products, in addition to the fund NPK. In this case, the EM-1 and Microbion UNC bacterial fertilizer were the effective.
– In case of the rye-grass biomass none of the bacterial preparations used caused any significant changes, either alone or when used them with straw treatment. -
Allelopathic effect of invasive plants (Eriochloa villosa, Asclepias syriaca, Fallopia x bohemica, Solidago gigantea) on seed germination
179-182Views:257The aim of this study was to determine the allelopathic potential of invasive species woolly cupgrass (Eriochloa villosa), common milkweed (Asclepias syriaca), bohemian knotweed (Fallopia x bohemica), and giant goldenrod (Solidago gigantea Ait.) on germination crop (Lepidium sativum L.). Experiments were conducted under laboratory conditions to determine effect of water extracts in petri dish bioassay. Water extracts from fresh biomass (leaves and stem) of invasive weeds in concentrations of 4 and 8 g/100 ml were investigated. All invasive plants showed allelopathic effect on germination. In giant goldenrod stem water extract experiment, allelopathic effect was less pronounced.
The cress germination was greatly suppressed with the woolly cupgrass, common milkweed and the giant goldenrod. The experiment showed that the seed germination depended on the concentrations and the plant material used (leaves and stem).
-
The Evaluation of Grazed Grasslands on the Hortobágy
50-54Views:111The sward composition of different grasslands on Puszta Hortobágy has been developed according to prevailing abiotic and biotic factors. The abiotic conditions have been more or less constans for long periods of time, and the abiotic factors are determined by ecological conditions (climate, soil, topography). Among biotic factors grazing of herbivores was important in the development of Hortobágy grasslands for centuries (Sipos and Varga, 1993). Result of three-year investigations on the sward composition of grasslands utilised in different ways are presented. Data on ground cover, number of plant species, representation of different plant groups (grasses, sedge and bent-grass, herbs, legumes) and weeds are reported from six different grazed grassland types from Puszta Hortobágy.
In 1999-2001 a sward composition survey was conducted. Sample areas of 2x2 m2 were marked out in three replicates: on temporarily waterlogged grassland grazed by cattle (A), on dry grassland grazed by cattle (B), on dry grassland grazed by sheep (C), on dry grassland grazed by buffaloes (D), on dry grassland grazed by buffaloes and geese (E), on dry grassland cut for hay in May then grazed by geese (F). On the sample areas sward composition of grasslands was estimated according to Balázs (1949).
The average ground cover of different grasslands ranged between 60 and 100% (Table 2). The lowest value was found for grasslands C and E, which are grazed by sheep (C) and buffaloes and geese alternately (E). In these grasslands were some open spaces, on the other grasslands completely closed swards covers were observed.
The species diversity of these natural grasslands are high (Table 2). The grassland F, which were cut for hay in May had the lowest diversity (17-21). The highest number of species was found on grassland A and B (32-51), on other grazed grasslands (C, D, E) had 29-48 species.
The different plant groups had different representation in the total ground cover (Table 3). The number of herbs was always higher then that of grasses, but the cover of herbs was lower then that of grasses. The legumes and the sedge and bent grasses were present in high abundance in grassland A, but in the other grasslands were not.
The composition of herbs should be a warning for future utilisation systems on some grasslands of Hortobágy. Some species of herbs, e.g. Achillea millefolium, Artemisia vulgaris, Carduus acanthoides, Cirsium arvense, Cirsium vulgare Eryngium campestre, Galium mollugo, Galium verum, Ononis spinosa, Rumex crispus, Verbascum phlomoideus, Phragmites australis can be invasive on short grasslands. -
The scientific background of competitive maize production
33-46Views:276The effect and interaction of crop production factors on maize yield has been examined for nearly 40 years at the Látókép Experiment Site of the University of Debrecen in a long-term field experiment that is unique and acknowledged in Europe. The research aim is to evaluate the effect of fertilisation, tillage, genotype, sowing, plant density, crop protection and irrigation. The analysis of the database of the examined period makes it possible to evaluate maize yield, as well as the effect of crop production factors and crop year, as well as the interaction between these factors.
Based on the different tillage methods, it can be concluded that autumn ploughing provides the highest yield, but its effect significantly differed in irrigated and non-irrigated treatments. The periodical application of strip tillage is justified in areas with favourable soil conditions and free from compated layers (e.g. strip – strip – ploughing – loosening). Under conditions prone to drought, but especially in several consecutive years, a plant density of 70–80 thousand crops per hectare should be used in the case of favourable precipitation supply, but 60 thousand crops per hectare should not be exceeded in dry crop years. The yield increasing effect of fertilisation is significant both under non-irrigated and irrigated conditions, but it is much more moderate in the non-irrigated treatment.
Selecting the optimum sowing date is of key importance from the aspect of maize yield, especially in dry crop years. Irrigation is not enough in itself without intensive nutrient management, since it may lead to yield decrease.
The results of research, development and innovation, which are based on the performed long-term field experiment, contribute to the production technological methods which provide an opportunity to use sowing seeds, fertilisers and pesticides in a regionally tailored and differentiated way, adapted to the specific needs of the given plot, as well as to plan each operation and to implement precision maize production.
-
Changes of relative chlorophyll content at maize smut inoculated hybrids
55-58Views:223The leaf chlorophyll content analysis is important for several reasons. The natural or anthropogenic stressors directly effect on the chlorophyll content. Through the measurement of the chlorophyll content it is possible to obtain data concerning the physiological status of the plant, moreover the chlorophyll content is closely related to the nitrogen content, so it is linked to photosynthesis and the photosynthetic activity which determine biomass production.
One of the most common symptoms of plant diseases is the larger and smaller interveinal chlorotic areas. These might be local, or expand to the whole plant. There are multiply reasons of chlorosis such as reduction of chlorophyll content, unfavorable effects on the chlorophyll content,disorders regarding function of chloroplasts or ultimately destruction of the chloroplasts. Although such a chlorotic deviancy can contribute to significant losses in photosynthesis; however the underperformance photosynthesis of the sick plants is a more complex process.
As we unambiguously experienced during our investigations on common smut that the infected maize plants most common accompanying symptom was chlorosis on the leaves, so it is especially important to examine how the infection influenced on the chlorophyll content of different hybrids. -
Molybdenum - accumulation dynamics of cereals on calcareous chernozem soil
81-85Views:97This work is about the molybdenum-accumulation of cereals analyzing soil and plant samples from a field experiment set in
Nagyhörcsök by Kádár et al. in 1991.
In this long-term field experiment different levels of soil contamination conditions are simulated. Soil and plant samples were collected
from the experiment station to study the behaviour of molybdenum.
In this report results of maize, winter wheat, winter barley and soil analysis are presented. The conclusions are as follows:
– Analysing soil samples from 1991 we have found that roughly half of the molybdenum dose applied is in the form of NH4-acetate+EDTA soluble
– Comparing element content of grain and leaf samples we have experienced that molybdenum accumulation is more considerable in the vegetative plant parts
– Winter wheat accumulated less molybdenum then maize in its vegetative parts. Comparing molybdenum content of winter wheat to winter barley we found that the concentration of the element in wheat was lower by half than in the winter barley. It seemed that molybdenum accumulated to the least degree in winter wheat. -
Effects of water deficit on the growth and yield formation of maize (Zea mays L.)
143-148Views:148Maize (Zea mays L.) is the most important consuming cereal crop in the world after rice and wheat. This requires an understanding of various management practices as well as conditions that affect maize crop performance. Water deficit stress during crop production is one of the most serious threats to crop production in most parts of the world and drought stress or water deficit is an inevitable and recurring feature of global agriculture and it is against this background that field study of crops response to water deficit is very important to crop producer and researchers to maximize yield and improve crop production in this era of unpredicted climatic changes the world over.
A pot experiment was carried out to determine the effects of water deficit on growth and yield formation of maize. Two maize cultivars were used Xundan20 and Zhongdan5485. Three levels of soil water content were used in two stages of water control levels at two stages of the maize plant development
1. The JOINTING STAGE: A. CONTROL (CK) soil water content: from 70% to 80% of soil water holding capacity at the field, soil water content: from 55% to 65% of soil water holding capacity at the field, soil water content: from 40% to 50% of the Soil water holding capacity at the field.
2. The BIG FLARE PERIOD: A. CONTROL (CK) soil water content: from 75% to 85% of soil water holding capacity at the field, soil water content: from 58% to 68% of soil water holding capacity at the field, soil water content: from 45% to 55% of the soil water holding capacity at the field.
This research mainly studied the effects of water deficit on physiological, morphology and the agronomical characteristics of the maize plant at the different water stress levels.
The importance of these results in this experiment will enable plant producers to focus and have a fair idea as to which stage of the maize plant’s development that much attention must be given to in terms of water supply. -
Harvesting system established for the utilisation of Miscanthus sinensis ‘tatai’ “energy cane” in biomass power plants
143-150Views:139The increasing demand for energy worldwide and the resulting environmental impacts of fossil fuels forced many countries to turn to renewable energy resources as a clean and sustainable alternative. More than a third of Europe’s binding renewable energy source target of 20% by 2020 will come from solid biomass for electricity and heating according to the National Renewable Energy Action Plans submitted by member states of the European Union (EU) to the European Commission. To achieve this goal long-term yield studies in renewable energy plants are important to determine mean annual biomass and energy yield, and CO2 emission. Field experiments worldwide and also in Europe have demonstrated that Miscanthus, a fast-growing C4 rhizomatous grass can produce some of the highest biomass and energy yield per hectare of all potential energy plants. Miscanthus is a plant that originates from the southern slopes of the Himalayas. It was bred for the Hungarian climatic conditions in 2006 under the name of Miscanthus sinensis ‘Tatai’ (MsT). The species has high frost and drought tolerance and high energy value. This is why there is growing demand for the biomass (lignocellulose) produced by growing this plant. The biomass, produced from the high yield energy reed, can be transported to power plants in large quantities, in forms of bales. Its household consumption is not yet significant. This study presents the external features, characteristics, propagation and plantation process of MsT energy reed. The study also demonstrates the harvest technology of the species worked out between 2009–2012 in Tata, Hungary and the options of supplying to biomass
power stations.
-
Evaluation of the correlation between SPAD readings and absolute chlorophyll content of maize under different nitrogen supply conditions
121-126Views:324Currently, one of the most important objectives of agriculture is to maintain the principles of the sustainability. The use of precision technologies in agriculture belongs to this topic. The use of precision technologies is increasingly widespread in the cultivation of various agricultural crops, including maize. Sensing is an important part of these techniques. In our experiment we compared two methods: measuring relative chlorophyll content and the method of determine the extractable chlorophylls. The experimental plant was maize (Zea mays L.) and the measurements were performed at an early development stage (V8) of three genotypes. Three levels of nitrogen (0; 80; 160 kg ha-1) were applied during the experiment. The relative chlorophyll content was measured by SPAD-502 (Minolta, Japan) and a handheld GreenSeeker (Trimble, USA) device. The extractable total chlorophyll content decreased in parallel with the increased nitrogen level. The obtained SPAD values were diversified furthermore the NDVI values have not been changed for the effect of different nitrogen fertilization. In the early stages of development of maize, these parameters need to be complemented with other measurements to provide reliable information about the crops nitrogen status.