Search
Search Results
-
Using the principles of precision animal husbandry in fishbreeding
283-287Views:562Aquaculture species such as fish, crayfish, molluscs and plats are a wide range of products, with continuously growing demand worldwide. The reasons for this is that they are cheap and easy-toraise protein sources, thus having significance in food supply especially in developing countries in tropic regions, moreover, the premium category foodstuffs in developed high income countries are also belonging to this category. World annual total production of 164 million tons (2009) are made up of two sources: 1) marine and inland fisheries landings that are stagnating for several years and 2) aquaculture which is growing dynamically with annual 6% rate between 2000–2009. The latter is accounting for nearly 45% of the total supply due to the depleting marine stocks caused by overfishing. Aquaculture is growing continuously also because the production is safe and can
be planned well.
Intensive fish production systems are the representatives of precision animal production, several types exist and widespread worldwide. The modern computerized temperate water recirculation plants with several thousand m3 capacity are widespread also in Europe because they make it possible to produce even the most valuable species whole year round. A key issue in the technical/feeding outlay is to meet the demands of the cultured species the best and the operation of the system is to be safe and cost-effective. One condition for this is intensification: enable to produce more product per unit resource input or effort. The facilities need significant amount of energy, thus renewable energy sources are to be favoured for which Hungary has comparative advantages. -
Examination of different grain hardness varieties of the grinding technology properties of wheat
423-435Views:310In the mill industry, the purpose of the grinding technology is to separate wheat endospermium and shell and to recover grists. The most important and the highest energy requirement operation is shredding. Flour quantity and quality produced from wheat depends on the variety of wheat that will be shredded, the type of grinding equipment and the condition used before the grinding. For this reason, during my experiments, I ground two grain structured varieties of wheat in laboratory conditions using a disk grinder, stone grinder and roll grinder in air-dry and conditioned states. We measured the equipment’s performance and the produced grist’s particle size distribution, followed by the calculation of the energy requirements of the grinders. In the grinding experiments we compared the ash contents of the different particle sized grist’s fractions to map the wheat’s particular properties.
-
Effect of feeds with different crude fiber content on the performance of meat goose
5-8Views:794In the last 50 years, poultry meat production has increased dynamically. The role of crude fiber content in feed is unclear based on a small amount of literature about goose feeding.
The aim of theis experiment was to determine how various crude fiber content (55; 60; 65g crude fiber/kg feed) influences the performance of meat geese in the second phase of the rearing period. 150 goslings (3 treatments, 5 cages/treatment, 10 birds/cage) were included in the test. The experiment started and finished at the age of 21st and 63rd day, respectively.
The obtained results suggest that various crude fiber content did not influence the performance of meat geese significantly; however, a feed of 55g crude fiber/kg resulted in better fattening results (final body weight, body weight gain, specific feed protein and energy conversion rate). In addition, compound feed of 65g crude fiber/kg proved more favourable with respect to cost-efficiency. Based on the obtained results so far, further models and farm experiments are required.
-
Effect of soil-compost proportion on the abiotic and biotic parameters of soilplant system
99-104Views:338The environmental awareness, coming to the front in the 21st century, motivates us to supply the plant nutrient demand (in point of the plant, the environment and the human health) with natural materials.
Composting is known since the beginning of civilization. We came to know more the processes of composting as a result of last decades’ research, but numerous unexplained questions remained up to this day. The good compost is dark gray or brown, and it should not create an odor. It has aggregate structure, and it’s pH is neutral. Compost is soil-like (Fehér, 2001), nutrient-rich material, which contains valuable nutrients extracted from soil, so if we recycle this, we can decrease the chemical fertilizer and other (example: mineral energy) expenses.
The reason of that we chose the more accurate cognition of compost utilization is to do more effective the site-specific nutrient supply. This increases the average yield and the quality of yield. Besides we can decrease the harmful effects, which endanger the plant, the environment, and the human body.
During the compost utilization experiment we blended the acid sandy soil with compost in 4 different volumetric proportions (5 treatments) than we set the pots randomized. The advantage of this method is that we can provide equal conditions for plants so we can measure the effect of treatments correctly. Our experimental plant was ryegrass (Lolium perenne L.), that grows rapidly, tolerates the glasshouse conditions, and indicates the effect of treatments well. After the harvest of ryegrass we measured the fresh and dry weight of harvested leaves and the total C-, N-, S-content of the dry matter and of the soil, we examined the pH and the salt concentration of soil as well.
Our aim was to study and evaluate the relations between the compost-soil proportion and the nutrient content of soil and plant. In our previous experiments we confirmed (based on variance analyses) that the compost has a beneficial effect on soil and increases the nutrient content of the soil (Szabó, 2009). But it’s important to appoint that the compound of compost is seasonally change: in winter the selective gathered municipal solid waste contains salt that were applied for non-skidding of roads, but salt has a negative effect to the plant. We proved that in our experiment the 25/75% compost/soil proportion was ideal for the plant. This content of compost effected 6 times higher green matter weight compared to the 100% sandy soil. -
A growth model to predict body weight and body composition of broilers
17-24Views:505Models predicting the nutrient partitioning and animal performance have been developed for decades. Nowadays, growth models are used in practical animal nutrition, and they have particular importance in precision livestock farming. The aim of the present study was to introduce a broiler model and to provide examples on model application. The model predicts protein and fat deposition as well as the body weight of an individual broiler chicken from digestible nutrient intake over time. Feed intake (FI) and the digestible nutrient content of the feed are inputs as well as some animal factors like: initial BW, feed intake at 1 and 2 kg of BW, precocity and mean protein deposition. The protein and energy metabolism is represented as in the classical nutrient partitioning models. The protein deposition (PD) is driven by digestible amino acid supply and is under “genetic control”, the so-called potential PD limits the actual PD if protein is oversupplied.
The authors discuss how the model can be used to simulate the animal response upon different scenarios. Examples are given to show that the diet might be limiting if some animal trait is changed. Applicability of the model has shown through running the model by using different feed strategies (three- vs five-phase-feeding) and variations with animal factors. In conclusion, growth models are useful tools to support decision making for defining the most suitable feeds used in a broiler farm. The model presented in this paper shows a high sensibility and flexibility to test different scenarios. By challenging the model with different inputs, the animal response in terms of changes in body weight and feed conversion can be understood more by studying the shift in deposition of chemical constituents. The examples provided in the present paper shows the benefit of using mathematical models and their applicability in precision nutrition. It can be concluded that the growth model helps to apply “from desired feed to desired food” concept.
-
Soil moisture sensors for sustainable water management in field crop production: A review of advances and application challenges
41-54Views:443Efficient water management is essential for sustainable production of field crops amid climate change, population growth, and water scarcity. Traditional irrigation practices often lead to water use inefficiency, which harms soil health and reduces yields. To address this, reviewing previous studies on soil moisture sensors provides important context and guidance. Literature from Scopus, Google Scholar, and WoS (2019–2025) on soil moisture sensors for sustainable water management in field crops was screened. Out of 244 retrieved publications, 79 met the inclusion criteria with a focus on sensor technologies, applications, advances, and challenges, analysed thematically for research gaps and insights. Based on the findings, soil moisture sensors boost water management, improve yields of field crops, and support sustainable agriculture. However, hindrances related to high costs, lack of awareness, technical complexity, calibration needs, energy challenges, data interpretation difficulties, and compatibility problems hinder effective soil moisture sensor results. Integrating soil moisture sensors with decision-support tools optimises water use and protects soil health to promote long-term productivity under climate variability. Future research should strategise on the development of low-cost, reliable soil moisture sensors with technology subsidies, training, policy support, durability, integration, and simple data to empower farmers to adopt precision water management.
-
Opportunities for improving the nutritional value of cereal-based products
275-278Views:893We set up experiments for improving the nutritional value of cerealbased products. Our aims were to decrease the energy content of bakery products with the mixing of plant originated raw materials and byproducts with high fibre contents, and we have evaluated the effect of sodium-chloride on the physical properties of bakery products. We found that the apple pomace, the byproduct of juice production, is excellent for increasing of fibre content of bakery products and the further aim of investigation is to develop economical ways of hygienic byproduct handling and purification. Our experiments, evaluate the bakery use of triticale, have significant achievements and the breads made from triticale flour and whole-grain are commercially available nowadays. Our investigations included the possibilities of decrease of toxin contamination of cereals and our results can form a part of risk estimation systems after further experiments .
-
Evaluation of water balance in apple and pear trees
193-198Views:610A significant proportion of the aboveground green and dry weight of the plant constitutes the foliage. The canopy is an important factor
of plant growth. On one hand the canopy absorbs the solar energy, which is necessary for the photosynthesis, on the other hand accumulates
the absorbed nutrients by the roots, and the most of the water-loss happens through the foliages. The determination of the full canopy is not
an easy target. In our research we developed a measurement method to determine the leaf area. With the parameters of the examined tree
(leaf length and maximum width) and the data of ADC AM 100 leaf area scanner we determined the k-value, with which we can easily and
fast evaluate the leaf surface. Furthermore we defined from the water balance of compensation lysimeters the cumulative transpiration of
fruit trees and the efficiency of water use of trees. -
Overview of the evolutionary history and the role in citric acid production of alternative oxidase
83-88Views:293All organisms are exposed to countless environmental effects, which influence in a disadvantageous way their life processes. They continuously adapt to the changing conditions and respond to the stress impacts by defence mechanisms. Through different signal transduction pathways they are able to increase or decrease the expression of their genes and consequently modify their metabolic processes. My interest focuses on alternative oxidase (AOX) enzyme whose expression is often increased under biotic and abiotic stress. The so far proven and putative functions of the AOX play a role in the ability of organisms to adapt to different conditions, such as heavy metals accumulation, pathogenic infection, oxidative stress and lack of oxygen or nutrients.
AOX is a member of the di-iron carboxylate protein family. Members of the di-iron carboxylate protein family are present in all kingdoms of life. They are considered to have ancient origin. It is believed that their sulfide-resistant and oxygen-reducing ability played a role in the survival of organisms during the transition between the anaerobic and the aerobic world. It is assumed that the AOX arose in eukaryotes through a primary endosymbiotic event, and this event made possible the development of mitochondria. Afterwords, vertical inheritance, and secondary and tertiary endosimbiotic events led to its spread among eukaryotes. It is assumed that bacteria obtained AOX by horizontal gene transfer from plants.
AOX-catalyzed alternative respiration plays an important role in the operation of energy-producing and biosynthesizing system of microorganisms. In these cases, the regeneration of reduced cofactors is an essential condition, and therefore may be rate-limiting for biotechnological processes, including the citric acid production.
-
Biomethane production monitoring and data analysis based on the practical operation experiences of an innovative power-to-gas benchscale prototype
399-410Views:634Power-to-gas (P2G) is referred to technologies that convert carbon dioxide into methane. Both bio- and chemical catalysts may be used for conversion purposes. One of the most disruptive biotechnologies was developed by the University of Chicago (IL) (publication number: EP2661511B1), using a robust, highly selective, patented strain of Archaea. Electrochaea GmbH has developed an innovative bench-scale P2G prototype unit, which uses this highly efficient Archaea strain, specialized components and specifically developed control strategies. The structure and the components of the prototype are equivalent with the functional parts of the currently largest commercial scale biomethanation BioCat plant located in Avedøre, Denmark (www.biocat-project.com). Power-to-Gas Hungary Kft. has committed to further develop this innovative technology. The first steps of this development have been taken by operating the benchscale unit and analyzing the data of the operating periods.
The prototype is operated based on weekly campaigns. During continuous operation, H2O is generated as a by-product of methane. Therefore, approximately 200 ml of biocatalyst is discharged each day and concentrated media containing macro and micronutrients are injected into the reactor to maintain media composition. The laboratory staff records all gas composition data each morning. The gas composition is measured every 12 minutes by an Awite AwiFlex Cool+ gas analyzer. Within this article, we analyze the collected datasets containing more than 12 000 records and present the first practical experiences of the operations of the innovative power-to-gas bench-scale prototype.
The analysis of the collected gas composition data of the product gas already provides important data for modelling the commercial-scaled processes. The average value of VVD was about 40 l/l/d in the period under review. Further increase of the methane content can be achieved by introduction of higher mixing energy and by increasing pressure levels in the bioreactor (as demonstrated in the BioCat plant – data not shown here) – both of which are strategies envisioned for the commercial plant. In routine activities (turn on, shut down, continuous operation) we could verify the high robustness of the biocatalyst and the base connection between the registered datasets and performed test results.
-
Polymorphism of the bovine GH and LEP genes in a population of Slovak spotted bulls
19-23Views:282The aim of this study was the detection of polymorphism in the bovine growth hormone and leptin genes using the PCR-RFLP method. A
polymorphic site of the growth hormone gene (Alul loci) that results in amino acid change at position 127 of the protein chain (leucine, L to
valine, V) has been linked to differences in circulating metabolites, metabolic hormones and to milk yield. The polymorphism in bovine leptin
gene is situated in the intron between two exons, which results in an amino acid change at position 2059 of the protein chain (cytosine, C to
thymine, T). The polymorphisms were studied in a group of 58 bulls of the Slovak spotted breed. A strategy employing PCR was used to amplify 428 bp (GH gene) and 422 bp (LEP gene) products from blood samples. Digestion of PCR products with restriction enzymes AluI and Sau3AI revealed alleles: L and V; A and B for GH gene and LEP gene, respectively. The growth hormone gene is a candidate gene for body weight gain in cattle, since it plays a fundamental role in growth regulation. Leptin plays an important role in the regulation of feed intake, energy metabolism, growth and reproduction of cattle; therefore, animals with higher leptin gene expression will probably have lower daily weight gain than others with similar forage offer and nutritional condition and will also likely have longer calving intervals. -
Texture analysis as a method for grape berry characterization
Views:610The marketability of table grapes is mainly characterized by berry size, color, taste and texture. Mechanical measurements of table grape berries could provide objective information on the textural qualities of grape berries. In addition, this method might be suitable to study the effects of phytotechnical methods (such as girdling) on table grape quality. The aim of this preliminary work was to demonstrate how instrumental testing could be used to examine the effects of girdling on berry grape texture and define the textural characteristics of table grape berries. Cane girdling was carried out at veraison in two table grape varieties. Texture analysis was performed several times during the maturity. Besides this examination another five varieties were analyzed to assess their berry mechanical properties. Double compression test was used to determine berry hardness and its derived parameters. Puncture test was applied to evaluate skin hardness, skin elasticity and skin break energy. Skin thickness was also investigated. Berry hardness, skin hardness and skin thickness of the girdled grapevines were significantly affected by this technique. Most of the textural parameters showed differences among the seven cultivars.
-
Alternatives of sewage sludge use in the crop production
83-87Views:193The produced plants reduce the greenhouse effect because they fix CO2 that contributes to the causing of the greenhouse effect with about 50%. The production of fertilizers is not only a costly process but it needs a considerable energy at the same time. Nowadays, the reduction of the proportion of the fertilizer is significant. One of the reasons of this is that during the production such by-products are produced in a big quantity in which the necessary vegetal nutrients can be found in a considerable measure these enrich the organic matter of soil. The latter is essential condition for the microorganisms in the soil, without which the sustainable plant cultivation can not be achieved. Besides high prices of artificial fertilizers the utilization of the wastes is economically justified. Finally the other reason for the reduction of a usage of artificial fertilizer is that the wrong use of the fertilizer may cause environmental pollutions. I examined the cultivation application of the sewage sludge in laboratory circumstances during my work.
-
Assessment of Environmental Susceptibility/Vulnerability of Soils
62-74Views:247Soils represent a considerable part of the natural resources of Hungary. Consequently, rational land use and proper soil management – to guarantee normal soil functions – are important elements of sustainable (agricultural) development, having special importance both in the national economy and in environment protection.
The main soil functions in the biosphere are as follows: conditionally renewable natural resource; reactor, transformer and integrator of the combined influences of other natural resources (solar radiation, atmosphere, surface and subsurface waters, biological resources), place of „sphere-interactions”; medium for biomass production, primary food-source of the biosphere; storage of heat, water and plant nutrients; natural filter and detoxication system, which may prevent the deeper geological formations and the subsurface waters from various pollutants; high capacity buffer medium, which may prevent or moderate the unfavourable consequences of various environmental stresses; significant gene-reservoir, an important element of biodiversity.
Society utilizes these functions in different ways (rate, method, efficiency) throughout history, depending on the given natural conditions and socio-economic circumstances. In many cases the character of the particular functions was not properly taken into consideration during the utilization of soil resources, and the misguided management resulted in their over-exploitation, decreasing efficiency of one or more soil functions, and – over a certain limit – serious environmental deterioration.
Soil resources are threatened by the following environmental stresses:
– soil degradation processes;
– extreme moisture regime;
– nutrient stresses (deficiency or toxicity);
– environmental pollution.
Environmental stresses caused by natural factors or human activities represent an increasing ecological threat to the biosphere, as well as a socio-economic risk for sustainable development, including rational land use and soil management.
The stresses are caused by the integrated impacts of various soil properties, which are the results of soil processes (mass and energy regimes, abiotic and biotic transport and transformation and their interactions) under the combined influences of soil forming factors. Consequently, the control of soil processes is a great challenge and the main task of soil science and soil management in sustainable development.
The efficient control of these processes necessitates the following consecutive steps:
• registration of facts and consequences (information on land and soil characteristics, land use, cropping pattern, applied agrotechnics, yields, with their spatial and temporal variability);
• evaluation of potential reasons (definition and quantification of soil processes, analysis of influencing factors and their mechanisms);
• assessment of the theoretical, real, rational and economic possibilities for the control of soil processes (including their risk-assessment and impact analysis);
• elaboration of efficient technologies for the „best” control alternatives (best management practice).
Scientifically based planning and implementation of sustainable land use and rational soil management to ensure desirable soil functions, without any undesirable environmental side-effects, require adequate soil information. In the last years such data were organized into a computer-based GIS soil database in Hungary, giving opportunities for the quantification, analysis, modelling and forecasting of the studied environmental stresses and for the efficient and scientifically based prevention, elimination or reduction of environmental stresses and their unfavourable ecological and economical consequences.
Special attention was paid to the assessment of various soil degradation processes, as: (1) soil erosion by water or wind; (2) soil acidification; (3) salinization and/or alkalization; (4) physical degradation (structure destruction, compaction); (5) extreme moisture regime: drought sensitivity and waterlogging hazard; (6) biological degradation; (7) unfavourable changes in the plant nutrient regime; (8) decrease of natural buffering capacity, (9) soil (and water) pollution.
The actions against undesirable environmental stresses and their unfavourable consequences are important elements of sustainable, efficient, economically viable, socially acceptable and environmentally sound crop production and agricultural development. These are joint tasks of the state, decision makers on various levels, the land owners, the land users and – to a certain extent – of each member of the society. -
The examination of relation between the C/N ratio and the biogas yields in the Regional Biogas Plant of Nyírbátor
63-68Views:278The Regional Biogas Plant of Nyírbátor was built by the Bátortrade Ltd. The biogas plant contains 6 mezophil and 6 thermophil fermentation tanks, because the biogas production is based on mixed compositions. The regional plant is a multifunctional system. It produces agricultural products and biogas with high methane content. The utilization of biogas is also accomplished here; gas-engines transform it to electricity and
heat-energy. The product electricity is used by the local plants, the surplus is sold.
The aim of the research is the examination of the quality and quantity of the input materials that put into the mixers and follow the seasonal, periodical and optional changes of the input materials. The analyzation of the quality and quantity data can give an answer to the optional changes of biogas production because the input materials determine the composition of the examined recipe. The C/N ratio was between 11-13, the maximal value of the biogas yield was observed by 12.35 C/N ratio. -
Application of AquaCrop in processing tomato growing and calculation of irrigation water
183-187Views:519The area and volume of processing tomato production is increasing in Hungary. Irrigation is crucial for processing tomato growing. To save water and energy, it is important to know exactly how much water is needed to reach the desirable quality and quantity. AquaCrop is a complex software, developed by FAO, which is able to calculate irrigation water needs, several stress factors and to predict yields. A field experiment was conducted in Szarvas in processing tomato stands, under different irrigation treatments. These were the following: fully irrigated plot with 100% of evapotranspiration (ET) (calculated by AquaCrop), deficit irrigated plot with 50% of ET (D) and control (K) plot with basic water supply was also examined. Dry yield, crop water stress index and soil moisture were compared to modelled data. The yields in the plots with different access to water were not outstanding in the experiment. The model overestimated the yields in every case, but the actual and modelled yields showed good correlation. AquaCrop detected stomatal closure percentages only in the unirrigated plot. These values were compared to CWSI – computed from leaf surface temperature data, collected by a thermal cam in July – and showed moderately strong correlation. This result suggests that Aquacrop simulates water stress not precisely and it is only applicable in the case of water scarcity. Soil moisture data of the three plots were only compared by means. The measured and modeled data did not differ in the case of K and ET plots, but difference appeared in the D plot. The obtained results suggest that the use of AquaCrop for monitoring soil moisture and water stress has its limits when we apply the examined variables. In the case of dry yield prediction overestimation needs to be considered.
-
Examination of compost maturity using reflectance
29-34Views:626Composting is one of the most popular recycling processes for organic waste. Composting plays an important role in waste and by-product management and is becoming increasingly important in both sustainable energy management and circular economy. Composting transforms organic matter to produce a safe and stable by-product (compost) that can be applied to arable land in a similar way to fertilizer. Physical, chemical and biological methods can be used to monitor the process and to determine the maturity of the compost, as spectrometric/spectroscopic methods play an important role in the analysis of different environmental samples.
Our aim was to (1) non-destructively detect the effects of different additive ratios on the spectral properties of the composting process and the spectral data of different compost mixtures, (2) to find the wavelength ranges of the reflectance curve (inflection points) sensitive to compost maturity, (3) to determine the correlation between the inflection points and the chemical and physical parameters measured in compost by conventional methods.
The mixture of broiler and hen manure and zeolite was composted 62 days in windrow composting. In the composting experiment, the moisture content and temperature (°C) were measured every three days and compost samples were taken and in 10% destillated aquaeous suspension were measured the pH and electrical conductivity (mS cm-1). Compost samples dried to mass stability were spectrally analyzed in the wavelength range 400–1000 nm with AvaSpec 2048 spectrometer.
Based on the results, the reflectance of mature compost were smaller in the last days of composting than the reflectance values of day 0 samples, thus compost maturity can be detected spectral in the VIS-NIR wavelength range. For the tested compost prisms, the reflectance of each sampling day shows a constant slope, with a significant overlap of the reflectance curves up to 400–700 nm wavelength range, and there was a breakpoint in the 700–750 nm wavelength range which was proved by binary encoding.
-
Development opportunities of biomass-based ethanol production in relation to starch- and cellulosebased bioethanol production
71-75Views:298The biomass is such a row material that is available in large quantities and it can be utilizied by the biotechnology in the future. Nowadays the technology which can process ligno cellulose and break down into fermentable sugars is being researched. One possible field of use of biomass is the liquid fuel production such as ethanol production. Based on the literary life cycle analysis, I compared the starch-based (first generation) to cellulose-based (second generation) bioethanol production in my study considering into account various environmental factors (land use, raw material production, energy balance). After my examination I came to the conclusion that the use of bioethanol, independent of its production technology, is favorable from environmental point of view but the application of second generation bioethanol has greater environmentally benefits.
-
Investigation of the β-casein (CSN2) gene polymorphism in goat breed – Review
69-73Views:1550Milk plays an important role in the human nutrition as an important protein and energy source. Β-casein is the most abundant casein fraction in the goat milk. The β-casein gene has at least 9 polymorphism in goat breed (A, A1, B, C, C1, D, E, 0 and 0’). The most important alleles are the zero (0) and zero’ (0’) alleles, because they decrease the quantity of β-casein protein in milk. The lower quantity of the β-casein changes the properties of the coagulation and the allergenin milk. This review is about the β-casein gene polymorphism in goat breed.
-
Development alternatives of rural economy
187-191Views:207Environmental, natural, social and economic processes undergoing both in Europe and in the world predict such a 21st century that is characterised by increasing resource-crisis from both economic and ecological aspects. Therefore, it is very important for Hungary to see what happens to its natural resources, epecially to its agricultural land, water reserves as well as the biodiversity of the local unique flora and fauna. One of the most significant issues of the rural areas of Hungary is whether we can preserve the natural habitats and the various biodiversity of the related species, the favourable biological background of agriculture. In addition, whether we are able to provide high quality food for the country as well as for the broader reagion, whether we are able to produce energy from the resources available as well as to provide sufficient opportunities for the population to live and work. These can be considered as the most significant issuesof the coming decades which determine the strategy of the Hungarian rural economies in long term.
-
Examination of extensographical parameters of winter wheat (Triticum aestivum) flour
109-115Views:454In the trade of the European Union principally the analysis of alveographical and extensographical parameters mean the acceptance system.
In the present study we analysed the extensographical parameters of 10 winter wheat varieties breed by the Cereal Research Non Profit Company with Brabender extensigraph and we made a comparison, correlation among the results. The examinations with Brabender the following among: show the GK Kalász and the GK Élet varieties show high resistance of extension and the GK Petur variety produces high extensibility. The GK Garaboly has shown low extensibility and energy. The other parameters had different values in the examined three years. The measurings with SMS2 Texture Analyser show middle positive correlation between extensibility and subarea. There are weak correlation between at the significantial level in the 90, 135 resistence of extension by Brabender and by SMS2 Texture Analyser and in the 45 extensibility by Brabender and by SMS2 Texture Analyser of relaxed dough. There is no correlation among other parameters. -
The history and present of public drinking water supply and its regionalisation in Debrecen
147-151Views:284The public water supply played a major role in the urbanization of Debrecen city, just like in the case of many other cities. We had plenty of water and so we wasted it. However nowadays we experience a considerable decrease in the level of groundwater which causes an increasing need of energy for pumping. Beside the above mentioned the ecological threat and the decreasing water quality are also major problems. This study attempts to draw attention to the possibilities and the future of the regional water supply, by showing the history of the water supply, the sanitation systems of Debrecen and their present day activities.
-
Calculating possibility of the leaf area index of apple and pear trees
229-233Views:541A significant proportion of the aboveground green and dry weight of the plant constitutes the foliage. The canopy is an important factor of plant growth. On one hand the canopy absorbs the solar energy, which is necessary for the photosynthesis, on the other hand accumulates the absorbed nutrients by the roots, and the most of the water-loss happens through the foliages. The determination of the full canopy is not an easy target. In our research we developed a measurement method to determine the leaf area. With the parameters of the examined tree (leaf length and maximum width) and the data of ADC AM 100 leaf area scanner we determined the k-value, with which we can easily and fast evaluate the leaf surface.
-
Potential use of bamboo in the phytoremediation in of heavy metals: A review
91-97Views:911There are many literature sources focusing on the phytoremediation of woody plants, but there are only few dealing with the phytoremediation of bamboo plants. Phytoremediation technology has the advantages of little disturbance to the environment and low remediation cost. Bamboo mainly exists in tropical and subtropical regions. As an energy plant, bamboo has a fast growth cycle, large biomass, simple cultivation, high economic efficiency, and convenient harvesting, which highlights the advantages of bamboo in phytoremediation. In addition, bamboo plants have good tolerance and uptake ability to heavy metals and have high application potential and development value in uptaking heavy metal contaminated soil. However, due to climate, temperature and other reasons, bamboo cannot be widely planted in most countries. Research status of remediation of heavy metal contaminated soil by bamboo plants is summarized. The feasibility of its application in heavy metal contaminated soil is discussed in this paper. Aiming at the shortcomings of existing research, bamboo plants have a prospect in the field of plant phytoremediation for the future.
-
Nutrient Uptake of Miscanthus in vitro Cultures
23-24Views:251The large biomass production and the low necessary input fertilizer make Miscanthus an interesting, potential non-food crop with broad applications, e.g. for fuel and energy, for thatching, fiber production, for the paper and car industries, as well as for ethanol production.
Axillary buds of Miscanthus x giganteus were placed on a shoot inducing nutrient solution (modified Murashige and Skoog, 1962), basic medium supplemented with 0,3 mg l-1 6-Benzylaminopurin. After 40 days of culturing, the axillary buds produced three times more shoots than could normally be harvested. The nutrient content (N, P, K, Ca, Mg) was measured several times during culturing. The results showed that, after 35 days, nitrogen and phosphate were nearly completely taken up. From that time, shoot growth was not observed.
After shoot propagation, the plants were transfered into a nutrient solution for root formation (modified Murashige and Skoog, 1962), basic medium supplemented with 0,5 mg l-1 Indole- 3-Butyric acid, and could be potted in soil after about 14 days.