Search
Search Results
-
Inbound and Outbound Tourism in China: A Perspective Article
91-107Views:313The tourism industry in China has undergone significant changes due to globalization, technology, and changing consumer preferences. This perspective article, based on a systematic literature review, examines examines trends, challenges, and opportunities in inbound and outbound tourism in China, focusing on the industry's dynamism. Both inbound and outbound tourism have been negatively impacted by the COVID-19 pandemic, which has prompted new strategies and environmental adaptations. China has changed its priorities within the country to encourage domestic travel and support local firms. The rise in internationalisation and the growing middle class in China have led to an unprecedented rise in outbound travel. Chinese travellers are affecting travel habits and spending all around the world in the tourism sector. Language barriers, cultural differences, and safety concerns are some of the challenges that come with travelling abroad. To reach its full potential, China needs to adapt to the shifting global environment and take into account the specifications and preferences of both inbound and outgoing tourists.
-
Improving Safety & Ride Comfort through Dual Suspension System in Road Vehicles
30-36Views:180The essential objective of the proposed suspension framework is to limit the undesired disturbance of a vehicle because of uneven surfaces on streets. This framework in vehicles is comprise of some fundamental components like dampers and springs which ingests the stuns that are instigated by unusual streets. In any case, these frameworks can just work up to a predefined constrain. Vehicle suspension frameworks are planned by taking the solace capacity of a traveler in record and to enhance the street grasp on each surface.
This examination proposes an idea for structuring a superior suspension arrangement of vehicles to upgrade the nature of the drive without corrupting the dependability of the vehicle plan. In this exploration, a mix of two suspension framework is presented in which one goes about as an essential suspension while different fills in as an optional framework that can adequately lessen the vibrations. This mix upgrades the customary framework that is right now introduced in vehicles without bargaining on solace and street hold.
-
The Dunning–Kruger Effect in Knowledge Management Examination of BSc Level Business Students
14-21Views:209The Dunning-Kruger effect (DKE) in higher education evaluation is one of the current research areas of psychology, educational science, and management science (in our case). Its importance is that the less prepared one is, the less accurately one can judge what performance is expected of him. What is more, he will err more and will overestimate himself. The present study aims better to understand the phenomenon with new, small-sample empirical results. The study is part of a research series that has been ongoing at the University of Debrecen since 2015. It not only quantitatively expands the literature but also includes the course of Knowledge Management among those examined. During the research, students were asked both before the examination (N = 63) and after the examination (N = 76) to guess how many points they would achieve on a multiple-choice test. It supports the presence of DKE, both in the case of pre-examination and post-examination self-evaluations. Using four multivariate linear regression models, we examined whether the sign value or absolute value of the errors made during the guesses show a correlation - in addition to the available control variables - with the test score. Our results showed that the more accurate the pre-examination and post-examination estimations were, the higher the students' actual score was, while the less they tended to overestimate their preparation. This supports the presence of DKE, both in the case of pre-exam and post-exam self-evaluation.
-
Role of Lean and Agile Supply Chain Models for Pellet Fuel Technologies
119-130Views:151Business organisations constantly strive to improve their processes, both internal and external. Within the supply chain of a product, different strategies can be applied. This paper aims to answer the basic questions like what is the core of lean and agile SCM strategies, what are the differences of the two models, and how can they be combined. This paper examines further, which of these SCM models and what elements of them can be applied for wood pellet supply chains, also examining the possibility of their combination. The result of these examinations is, that even though fuel pellets can be considered as simple commodity and not a very innovative product, diversity in input characteristics, optimization of fuel pellet technology process variables and changes in output market qualities and quantities need sometimes agile, flexible answer from pellet fuel SCM. The basically lean character of pellet fuel technologies and SCM can further enhanced by implementing agile SCM model elements, as is the increased integration of suppliers into the supply chain.
-
Finite Element Analysis of Cellular Structures Using Ansys
197-204Views:222Additive manufacturing (AM) is a process in which the product is composed of overlapping layers of a material that is added using devices such as 3D printers. Its process has been evolving for decades and nowadays it can be used for several applications and with different materials. One modern usage is for medical and dental purposes. Since it became possible to print metal, it has been a good solution for bone implants, once it must be done with biomaterials and can now replicate the bone structure, for that unit cells should compose the implant. Both conditions are now possible to be achieved by AM, and the current study will analyze, using finite element method, the possibilities to create specimens for tests which the final product would result in a 3D printed bone implant.
-
Optimization of the Sheet Metal Base of a Toggle Clamp Using Finite Element Method
266-273Views:208Optimization relates to the ultimate yield strength and the maximum stress incident on the current model under critical working conditions and finds through iterative processing a way to compensate for the strength requirement without going beyond the desired mass limits. In this paper, the horizontal sheet metal base of a horizontal toggle clamp is optimised for mass reduction using the finite element analysis in the computer aided design software. The sheet metal base material is the ANSI32 Steel. In the design software, it is designed with the thickness of 7 mm and it is intended to support a workload of up to 750 N. The constraints were a fixed point added at all the holes and at the bottom surface of the sheet metal base. A number of iterations were made for the 750N loading force across the base plate to run the simulation. For optimization, the aim was to minimize the mass of the base plate. The design parameters were Von Mises, factor of safety and displacement. The variables were the slots’ width and material thickness along the mid-surface of the sheet metal. The mass was reduced by more than thirty per cent overall.
-
Analysis of the Benefits of SAP S/4 HANA Cloud IT/Is Investment in the Case of PT XYZ
13-24Views:284PT XYZ is one of the largest telecommunication companies in Indonesia. In 2020, PT XYZ implemented a digital transformation to increase its excellence by investing in industry telecommunication and information systems (IT/IS) enterprise resource planning software called SAP (System Application and Processing) S/4 HANA Cloud. The study aims to analyze the benefits of these IT investments made in PT XYZ. The results are carried out using the Comparative Analysis of Financial Statements followed by Business Value and Financial Feasibility Analysis and the Cost Benefit Analysis (CBA) method between 2018 and 2021. It can be revealed that the SAP S/4 Hana Cloud investment benefits the company's operations, which are identified in the form of 5 sub-categories that fall into required categories based on Ranti's Generic IT/IS Business Value.
-
Direct Optimization of an Automotive Sheet Metal Part Using ANSYS
134-142Views:406Optimization of automotive parts nowadays is mainly used to design lightweight and cost-effective vehicle parts in order to improve the cost and efficiency. In this research, a sheet metal part was taken into consideration and optimized using direct optimization module in ANSYS to evaluate the process. An initial Finite Element Analysis (FEA) was done on the sheet metal part by adding forces and constraints in order to initiate direct optimization. The purpose of the optimization is to minimize the mass of the sheet metal part and maintaining a certain Factor of Safety (FOS) by automatically modifying the sheet thickness and the dimension of the side holes. As a result, the best candidate point with 23% mass reduction was found which complied with FOS value was selected for optimal geometry.
-
Possible ways of IP Commercialisation in the European Higher Education Ecosystem
56-74Views:224Strong links between universities, and companies can play crucial role in promoting taking into practice of ideas that drive the knowledge society, and in raising competitiveness and living standards. In academic terms of IP management, all activities aimed at sharing knowledge generated in research institutions as a knowledge transfer including scientific publishing, conference presentations, collaborative research with external partners, and contract-based clustering activities, such as licensing and spin-offs. In a narrower sense, the IP management means technology transfer is aimed at placing a given technology on the market, and includes any process by which the recovery partner becomes able to produce new products or services. IP with traditional university mission, values, and activities primarily focusing an active university role in entrepreneurship and contracts with private sector for IP commercialization. This paper gives a comprehensive overview about IP management in universities of the European Higher Education System including the following aspects: partnerships (licensing, industry collaborators); IP invention (disclosures, patenting); proof of concept research bridging the gap between lab discoveries and market application (highly innovative R&D to solve practical problems and commercialization research aiming patented technologies towards business exploitations) and commercialization (start-up incubators and strengthening the entrepreneurial attitudes and competencies). The methodology based on secondary research analysing EU, OECD, on-line literature sources and relevant, up-to date statistical data as well. The conclusions and recommendations based on this „desk research” work reflects the authors.
-
Analysis of Thermal Degradation in the Annealing Process of Colored Parts Built by Extrusion-Based 3D Printing
124-133Views:381With the ever-increasing request of light materials, poly lactic (acid) PLA, have got much in consideration. Low-cost PLA materials have risen its use. Those possess some benefits but nevertheless insufficient mechanical strength. The printed PLA objects have a stumbling block for practical applications. Thus, annealing is an interested alternative to make 3D printed objects strong. This thermal treatment can significantly develop investigational studies and offer technical data. Hence the purpose of this paper is study and discuss how to increase the flexural strength through annealing process. Geometry distortions and color degradation will be analyzed. Differential Scanning Calorimetry, Taguchi Method (TM) and variance (ANOVA) were applied as part of the design experiments and analysis. Twenty-seven printed specimens were tested and factors as temperature, time and color were selected.
-
Study of the University Electronic Games E-sports League and Its E-sports Players
52-61Views:142E-sports are competitive video games coordinated by different leagues and organisations. E-sports players belong to teams or different managements, which are sponsored by various economic companies and establishment. In the beginning, only offline and then online competitions were organised, and nowadays an offline final takes place in sports halls at the end of an online qualification round. The primary objective of the present research is to study the e-athletes participating in the University Electronic Games (UEG) e-sports competition. In addition to the e-sports players, I consider it important to examine the tournament itself, how the players interviewed rate it and what motivated them to participate again. I conducted an online questionnaire survey among the participants of the three seasons of the UEG online tournament organised by the University of Debrecen. UEG is the largest university e-sport tournament in Hungary in terms of its number of participants, which is why it was selected for the study. The participants in the study are motivated to compete in order to achieve success and enjoy competing to win, for them e-sports is a self-fulfilment. They keep up to date with national e-sports news and competitions through social media and the university mailing system. In general, the participants rate the UEG e-sports championship highly. The organisers need to improve the organisation of the tournament and their preparedness to run a tournament of this size. Their strengths are their helpfulness and their accurate and precise information about the tournament.
-
The Effect of the Excess Titanium Content on the Microstructure of Al – Si Foundry Alloys
12-20Views:121Grain refining is an important technological step for the nucleus growth of the melt, in order to increase the number of nuclei, to improve mechanical properties (tensile strength, yield strength, hardness, elongation), feeding conditions and to decrease the tendency of hot tearing and the degree of sintering. [1][2] The aim of the experiments was the determination of the grain refining effects of titanium (Ti) addition in the form of AlTi5B1 master alloy to the examined alloys (AlSi7MgCu0.5 – AC 42 000, AlSi9Cu3Fe0.5 – 46 500; AlSi9Cu1 – AC 46 400). The results prove that the addition of small amount of master alloy has a favourable effect on the foundry practice.
-
Effect of the Flow Curve Determination on the Thinning of Drawn Parts
16-25Views:77This study presents the results of finite element simulations based on different variations of the flow curve of DC04 automotive thin sheet. The aim of our research is to investigate how different flow curve equations affect the variation of sheet thickness in cup drawing tests. In order to exclude other influencing factors in the experiment, both the sheet material and the geometric properties of the specimen, as well as the external state factors were considered to be the same in all cases. The finite element simulations were performed using Simufact 2021.1 software. Our results shows that there are no significant differences in wall thicknesses until we reach the zone of double necking, where essential differences are observed.
-
An Analytical Solution for the Two-Layered Composite Beam-Column with Interlayer Slip and Constant Axial Load
14-31Views:67The authors present an analytical solution for the two-layered composite beams with imperfect shear connections. The considered beam is simply supported at both ends. The beam is subjected to transverse and axial loads. The kinematic assumptions of the Euler-Bernoulli beam theory are used. The connection of the beam components is perfect in normal direction, but the axial displacement field may have jump. The shear axial force derived from the imperfect connection is proportional to the relative slip occurring between the layers. The determination of the analytical solution is based on the Fourier method. Two examples illustrate the application of the presented analytical method.
-
Torsion of Truncated Hollow Spherical Elastic Body
234-240Views:132This paper deals with the torsion of a body of rotation whose shape is a truncated hollow sphere. The material of the truncated hollow sphere is isotropic, homogeneous and linearly elastic. To solve the torsion problem, the theory of torsion of shafts of varying circular cross section is used, which is introduced by Michell and Föppl. Analytical solution is given for the shearing stresses and displacements. A numerical example illustrates the application of the presented solution. The results of the presented numerical example can be used as a benchmark problem to verify the accuracy of the results computed by finite element simulations.
-
Testing the Sametest-effect in a BSc-level Business Communication Course Examination
10-15Views:74Using secondary data, we empirically examine two biasing effects that may arise in the written evaluation of large groups of students. Suppose the students take the examination in consecutive groups, and we wish to avoid the distortion caused by tests of different difficulty. In that case, we can decide to use the same examination questions. However, the danger of the "same test effect" arises, according to which the group writing later can perform better if it receives information from the examinees in the previous round. Using the same examination tests cannot be recommended if that effect is significant. Another related potential phenomenon is the "revealed sameness effect". Accordingly, if the examinees are aware of the repetition of the questions, it significantly increases the scores of the following group. We tested these phenomena using the data of a three-round written examination. A previously published analysis of a larger sample found that the "same test effect" can be expected if the students decide in which round they take the examination. Since it was possible to freely register for the examination rounds for the assessment analyzed in this study, we assume that the "same test effect" will be significant. Based on the literature, we also expected that the "revealed sameness effect" would occur in the third round. The performed linear regression analysis (N=77) only found some weak evidence for the 'revealed sameness effect' but not for the 'same test effect'.
-
Millennium Generation Work Experience
657-665Views:213If we are open-minded in our everyday life, we should not overlook the phenomenon of student work. Within the framework of this study, our aim was to examine the work experience, later employment plans and income needs of students starting their studies at the Faculty of Economics at the University of Debrecen. In addition, we analyze the most important sources related to student work through literature studies.
It is important to pay attention to changing attitudes of newcomers to higher education as they become active job seekers after graduation. At the Faculty of Economics of the University of Debrecen, about 1,700 students started their studies in the 2019/2020 academic year. Our research was conducted with the involvement of these students.
The data were collected among students participating in the stork camp organized by the University of Debrecen. The survey covers, among other things, the initial salary requirements, previous work experience, future plans, including the willingness to work abroad, and factors that are taken into account when choosing a job.
-
An Analytical Solution for Static Problems of Cantilever Curved Beams with Variable Cross Sections
226-233Views:140This paper gives an analytical method to obtain the deformation of a cantilever curved beam. The curved beam considered has circular centre line and the thickness of the cross section in radial direction depends on the circumferential coordinate. The kinematics of the Euler-Bernoulli beam model is used to formulate of governing equations. The curved homogeneous and isotropic elastic beam is fixed at the one of the end cross section and on the other end cross section is subjected to concentrated forces and a couple. A numerical example illustrates the applications of the derived formulae.
-
Implementation of the Heinrich Spatial Visualization Test in a Virtual Environment
1-8Views:203A virtual environment was developed for PC and Android to be used with a desktop display and the Gear VR, respectively. The goal with it is to measure and enhance the spatial skills of people, because the latter can be achieved by solving simple geometric problems. Originally, this virtual environment consisted only of three such tests, namely the Mental Rotation Test, Mental Cutting Test and Purdue Spatial Visualization Test. Measurements were done in the past with these tests, but now the Heinrich Spatial Visualization Test is also included in the virtual environment. In this paper, its implementation and future measurement plan are presented.
-
Generative Design of Articulated Rod of Radial Engine
36-47Views:446The constant need for improvement drives humans to look for the best possible option in every field. Computer Aided Design (CAD) is no exception, to follow the best method of designing a product and finalizing it, researchers came up with an idea to generate multiple designs using fixed input values and finalizing the most appropriate one. The objective is achieved using an iterative design process based on algorithms by a specific software. Generative design introduces a new experience based on the Integration of machine dynamics in the manufacturing of objects and about experience. In this work generative design method was investigated on an articulated rod, one of the most important components of the rotary engine, to effectively improve the overall working performance of the engine and enhance its performance by decreasing its mass. Since fuel consumption by the machine can be greatly reduced by lowering the mass, so the goal is to minimize the weight of the rod while mechanical characteristics have to be within the acceptable values. Also, finite element analysis (FEA) was investigated on the part as to ensure the reliability of the rod before and after optimization.
-
Wearable technology usage among students of the University of Debrecen
33-47Views:136The lack of physical activity and the growing prevalence of a sedentary lifestyle are urgent public health problem worldwide. The problem is also typical of the young population, especially university students, who spend most of the day in a sitting position. Technological development is one of the catalysts for the rise of a sedentary lifestyle, nevertheless, thanks to this, many devices have appeared on the market that can be used to encourage physical activity. The widespread of wearable activity tracker devices – wristwatches, wristbands – among the population shows a constantly increasing trend, with a parallel increase in the amount of data collected about ourselves (step count, calories burned, heart rate). The main goal of the present study derives from the recognition of the gap in this field in the domestic sports science literature therefore our focus is on modern information technology tools in the dimension of physical activity. The aim of this study is to assess the attitudes of the university student population towards activity-tracking devices. We conducted a cross-sectional online quantitative survey (questionnaire) among DE GTK students. 340 people filled out the questionnaire correctly. In addition to descriptive statistics, parametric and non-parametric tests (Pearson's chi-square test, Fisher's exact test, t-test, Mann-Whitney test) were used to examine the relationships. The results of the statistical tests were considered significant if p<0.05. We performed the distribution of the variables using the Kolgomorov-Smirnov test. The majority of respondents (55%) have already tried some kind of wearable device that measures physical activity. Every third student (34%) are currently using their device. Those who have not tried these devices so far indicated the price as the primary deterrent. 32% of the students plan to invest in such a device in the future. 39% of device users use an activity tracker bracelet, while 61% use or used a smartwatch. In terms of sex, we did not find any differences in asset ownership. The primary goal of the students (66.8%) was to track their physical activity. The most frequently used function was tracking the number of steps, indicated by 81% of the respondents, followed by heart rate measurement (67%). Most of them (69%) set some kind of goal regarding their number of steps. According to every third student, they moved more as a result of the device and managed to maintain the increased level of physical activity. 44% of the students claimed that their physical activity did not change despite using the device. Students tend to disagree with the positive statements related to the devices in connection with a healthy lifestyle. Although the present study suggests that wearable devices have an impact on students and they track their measured data, it is questionable whether the devices themselves are enough of an incentive for students to develop a healthier lifestyle.
-
Generative Design of a Mechanical Pedal
48-58Views:815Nowadays, there are various tools that support the initial stages of design available to use for engineers, the traditional Computer-Aided Design (CAD) has been implemented in the engineering components design and replaced manual drafting. However, with the advances and the rapid technology development, new trends emerged to cope with this evolution, namely, Generative Design, Topology Optimization, and Generative Engineering Design. The method is based on numerical algorithms that generate a variety of design and modelling options based on the criteria and constraints set by the designer to allow further design exploration. Proposed in this paper is an implementation of the generative design of a mechanical pedal with further finite element analysis.
-
Analysis of Disinfection Technologies that can Increase the Efficiency of Indoor Logistics Processes, which has been Reduced due to the COVID Pandemic
62-71Views:158As a result of the Coronavirus, both supply chain and internal logistics processes at factories have changed a lot. In many areas, the effectiveness of the logistics processes has declined because of the restrictions implemented against the virus. The study lists some adverse effects where logistics processes had to be modified due to the changing and protection measures against or negative effects of the virus. The authors also argue that these restrictions decreased the efficiency of logistics processes and workers' productivity. One option to increase the logistics sector's efficiency is to use air purification technologies, like the ones studied in this paper: UV-C, Bioxygen® or plasma-ion decontamination technologies. These disinfection processes can create a safe indoor environment. The authors analyse the examined technologies with SWOT analysis. The analysis results demonstrate which disinfection application is the most beneficial to help in improving indoor air quality for logistics processes.
-
The Impact of Sales Promotion, User Interface and User Experience Design on Shopee App Users' Repurchase Intentions
90-104Views:1112By 2022, Gen Z and millennial consumers dominated Shopee usage in Indonesia. Similar e-commerce platforms are forced to constantly innovate to remain competitive in the market due to increasing competition. Therefore, the primary focus of e-commerce platform development should be on the user interface, user experience design, and promotions that are appealing and easy to access so that potential customers are inclined to repurchase. This research aims to determine the influence of UI design, UX design, and promotions on the repurchase intention of users of the Shopee application. The sampling method used was systematic sampling. Ninety-six respondents are included in the sample. This study uses descriptive analysis, classical assumption tests, multiple linear regression, and hypothesis testing for data analysis. SPSS Statistics 28.0 was used for data processing. The study found that user interface design, user experience design, and sales promotions statistically impact the repurchase intention of users of the Shopee application. The results demonstrate the effectiveness of repurchase intent in e-commerce.
-
Was UEFA’S Goal of an Environmentally Friendly Euro 2020/21 a Success?
152-164Views:572The football Euro 2020/21 has been said to be more environmentally friendly, as it was spread all over Europe, thus no new stadiums needed to be built. On the other hand, more traveling became necessary. How does these effects behave with each other? Was the attempt to reduce emissions successful?
This paper seeks to compare the goals for UEFA 2020/21 for environmental friendliness and its success. A mixed research strategy was adopted in this paper where qualitative analysis was done on existing literature review and also quantitative approach where assumptions were drawn from literature review to estimate the environmental impact. This paper found that UEFA's initial estimate of 425,000 tons of carbon dioxide emissions in traveling for the Euro Cup 2020 was a bit higher than the actual amount of carbon emissions from our calculation of 143,531 tons. What stands out is that its findings agree with UEFA's estimate that Euro Cup 2020 emissions were lower than that of 2016 which emitted 517,000 tons of carbon dioxide for traveling. This gives a greater reason to conclude that UEFA met its goal of reducing carbon emissions. The overall carbon dioxide emissions in traveling and constructing stages were 1,275,988 tons in Euro Cup 2020 and 2,803,000 tons in Euro Cup 2016. This further affirms the overall carbon dioxide emission reduction by half in Euro Cup 2020 as compared to Euro 2016. From our findings, we can conclude that the Euro Cup 2020 indeed succeeded in reducing overall carbon dioxide emissions by half. Despite the success, this paper views that the carbon emissions are still high for a single event and hence there is room for reduction of carbon emissions to lower levels as possible. we can conclude that the Euro Cup 2020 indeed succeeded in reducing overall carbon dioxide emissions by half. Despite the success, this paper views that the carbon emissions are still high for a single event and hence there is room for reduction of carbon emissions to lower levels as possible. we can conclude that the Euro Cup 2020 indeed succeeded in reducing overall carbon dioxide emissions by half. Despite the success, this paper views that the carbon emissions are still high for a single event and hence there is room for reduction of carbon emissions to lower levels as possible.