Search
Search Results
-
Simulation of a Quadcopter with LabVIEW
46-49Views:90The aim of the paper was to create a LabVIEW-based Real-Time embedded system supported development environment, which was used for the Real-Time kinematics and dynamics simulation of a quad copter as well as the adherent state-feedback controller. The state-feedback controller was designed with Linear Quadratic Regulator (LQR) based method.
-
Maintenance from the Work Safety Point of View
190-196Views:126Deterioration of the technical condition of plant equipment is a common phenomenon nowadays. According to the experience of authorities, all this contributes to the occurrence of malfunctions and accidents. Plants that operate with an inadequate conservation strategy are now nearing the end of their design life, thus posing an increased accident risk. Aging processes are often accelerated by the operator's underestimation of the effects of equipment stress and the extent of deterioration mechanisms, and the consequent inadequate design and operation of condition monitoring and maintenance procedures. The aim of our work is to examine trends in the light of modern maintenance optimization methods and, in connection with this, to make proposals for the optimization of maintenance scheduling for employers.
-
Conemporary Danish Architecture- Humanity and Rationality
6-10Views:126In my study I have examined the characteristics of contemporary Danish architecture and the way how they formed. In Denmark, there is strongly rooted social atmosphere. The architectural efforts strongly reflects the social problems every time, considering the environmental aspects. The regionalist methods appear in the architecture, because of this the different architectural styles appear specific way. Self-reflective and analytical way the Danish architects try to answer the contemporary issues, even more emphasize the human factor.
-
Maintenance of Electric and Hybrid Vehicles
37-46Views:477An electric car is a vehicle powered by one or more electric engines, utilizing energy stored within batteries that are rechargeable. The first register of a usable electrical vehicle dates from 1880s. A hybrid vehicle incorporates two or more different power types, including, e.g., gasoline engines and electric motor. The goal in this work is to present the overall overview of the structure of the electric, hybrid and electric-hybrid vehicles, advantages and disadvantages of these types, the main points to focus when maintaining these and the challenges involved in its production and maintenance.
-
Fémhabstruktúrák elemzése és geometriai modellezése
145-152Views:123The development of an efficient procedure for 3D modelling and finite element simulation of metal foams is one of the greatest challenges to engineer researchers nowadays. Creating 3D CAD model is alone a demanding engineering task due to its extremely complex geometry, and the proper finite element analysis process is still in the center of the research. The aim of this project is to analyze the related literature and to adapt the results may be considered
-
Vibration Measurement of a Screening Machine
116-123Views:150In this paper we use linear vibration approach to make a model of a horizontal vibration screen, which can be applied at gravel pit in order to perform separation operation of the wet gravel particles. The model can produce the natural frequencies of the system, which are useful in the adjustment of the angular velocity of the vibration exciter. A laser triangulation unit is well applicable to measure peak-to-peak amplitude of the working vibration screen. Comparison has been performed between the results of the simulation and the measurements.
-
The CAD Modelling Possibilities of Gear Pairs by Two Ways in the Mechanical Engineering Practice
205-219Views:129The GearTeq 2021 software is a complex gear designer software which is capable to design different types of gears based on the initial geometric parameters by the user. Naturally, the users’ appropriate knowledge for the gear theorem and the manufacturing technology is indispensable for the design. The possibilities of the software are shown in this publication. The designed gear pairs are usable for different engineering fields (robots, working machines, vehicles, etc.).
-
Visual Analysis and Geometric Modeling of Metal Foams
89-92Views:101The development of an efficient procedure for 3D modelling and finite element simulation of metal foams
is one of the greatest challenges to engineer researchers nowadays. Creating 3D CAD model is alone a demanding
engineering task due to its extremely complex geometry, and the proper finite element analysis process is still in the
center of the research. The aim of this project is to analyze the related literature and to adapt the results may be
considered. -
Price Analysis Practices in the Pig Sector
1-12Views:62The analysis of sales prices has become a particularly important topic in pig production research, including statistical analysis. With globalisation, we can say that today we are talking about a sector constantly exposed to the effects of the world market. It is also worth pointing out that, compared with other sectors, the impact of external regulation and influence is less pronounced. Thus, the aim of the present research was to identify the journal articles published on the subject of price analysis and, on the basis of these, to establish the correlation with the methodologies often used. It examines the spatial location of price analysis. The results obtained show that the practice of price analysis is mainly carried out in the context of market leading countries, usually on the basis of a cross product chain issue. The research shows the emergence in recent years of increasingly sophisticated methodologies that allow more accurate conclusions to be drawn, while also facilitating planning from a practical point of view.
-
Polylactic Acid as a Potential Alternatives of Traditional Plastic Packagings in Food Industry
123-129Views:336Huge quantity of synthetic polymers is used as packaging materials in different fields of food industries. A significant part of these polymers applied as a primary, direct food contact construction. The scoped application area is the sweet industry. In this field Polystyrol (PS), Polypropylene (PP) and Polyethylene terephthalate (PET) have used but during the last fifteen years the usage of PET has been grown. In one hand the price of this material is efficient, form other hand the PET is the one of the most safe (for food industrial applications) petrol chemical plastic that can be used as primary or secondary food contact packaging material. To maximize the customer safety and minimize the environmental impact of traditional PET, a new bio-sourced and bio-degradable alternative polymer aimed to be used in this special food industrial segment. One of the potential alternatives is the Polylactic acid (PLA) that would be a possible substitute as it is compostable and produced from renewable sources and has good physical and mechanical properties [1].
-
Gamification in the field of human resource, a creative solution for recruitment
373-382Views:643With the introduction of latest tools and the expansion of technological solutions, the usage of smartphones ,with instant internet connection of course, has become an essential part of the net generation, also known as generation Z. At the same time, the role of IoT devices has also become part of our daily lives, completing and sometimes making it easier. This is due to the fact that the tools become more and more cheaper as time passes and parents and young people no longer consider these a technical innovations, but as a necessity. These generations; Y, Z and Alpha appear simultaneously on today's job market, which poses a serious challenge to future HR leaders and recruiters. Because of the generational gap between them, both motivational and demanding, novel solutions are becoming increasingly appreciated in this area as well. The purpose of this study is to demonstrate the potential of gamification and to highlight the its major areas, as well as to draw the attention to "good practices" in creative recruiting through better known examples. In addition, I also tried to point out the effect on the relationship between motivation and flow-experience. The gamification method is becoming more and more popular in our country, as it plays an increasingly important role in business and education as well. In recent years, with the use of serious games, there have been several examples of HR recruitment and selection, which clearly strives to reach out to younger generations.
-
Review of Drive Systems Applied in Modern Vehicles
728-732Views:165In this publication we review the drive systems of modern electric and hybrid vehicles. We also discuss the various types of electric motors, batteries, as well as fuel cell systems applied in them. Furthermore, as an important part of hybrid vehicles is the internal combustion engine, we review the literature about the methods used to.
-
The Effect of MMS Lubrication on Surface Roughness During Machining
452-457Views:80I display this paper the chipping front metal of cutting allocated geometric, considering particular the friction. I catch the attention energy's balance sheet someday metal of cutting, open one new direction the manufacture technology. I display this new direction's metal of cutting condition. but built I delineate his paper final division this new policy searching programme, consumed trial instruments as well as the evaluation's mode.
-
The Use of Additive Manufacturing for Wind Tunnel Simulations
62-71Views:138The current economical situation requires aircraft operators to start organizing their activity in the direction of carbon neutrality using innovative solutions.
The goal of present study is to desing a brand new wingtip device using 3D printing which helps reducing aerodynamical drag, leading to fuel efficiency and less carbon emission with its innovative shape.
-
Parallel Data Acquisition and Processing with Paspberry Pi Clusters
40-45Views:121Computer network was built from Raspberry Pis, what can solve research task in the filed of building mechatronics. According to the results, it can state the cluster built from Raspberry Pis, can process indoor sensor data effectively
-
Optimizing the combustion processes of a small scale solid fuel-fired boiler
358-369Views:133Over the last decade, the public has been paying increasing attention to reducing greenhouse gas and acid rain emissions and reducing particulate matter, which is extremely harmful to health and the environment. To improve air quality, the European Commission has achieved a range of measures to reduce air pollutant emissions in the transport, heat and electricity, industrial and agricultural sectors. In Hungary, the amount of gas and solid air pollutants from solid fuel combustion used by the public during the heating season represents a significant percentage of the total amount present in the atmosphere. In 2016, taking into the total emission, the 29% of CO2 emissions; 85% of CO emissions; 75% of the particulate matter emissions and 21% of the NOx emissions were derived from households. It follows that the improvement of air quality can also be achieved by controlling the emissions of solid fuel combustion plants. During our research we aimed to optimize the operation of a newly purchased TOTYA S18 boiler and a pilot pellet boiler. Operating the boilers in the correct mode minimizes air pollutant emissions, and the greater part of the heat generated is actually turns to heating the home, as with poor settings, a lot of heat leaves through the chimney. The data obtained during the tests can also be used to determine whether the boilers comply with the emission values set out in Commission Regulation (EU) 2015/1185.
-
The Empirical Examination of Different Customer Types
92-100Views:130The proper knowledge of customer types is essential for a well functioning company – regardless of its size. In current research we wanted to identify and characterize the particular customer groups with involving 302 persons. During the examination we measured the attitudes of these participants with the help of a statement range based on Kotler’s classical customer types. For the identification we made factor- and cluster analysis, and we could separate five different factors. They received the names of Angry, Definite, Discursive Passive, Experience Shopping and Indefinite - based on some related statements. After the cluster analysis – along these factors - we could separate four different groups: Young Impulse Shoppers, Outspoken Definites, Negatives and Born Customers. Each and every group requires different communication, sales attitude and service morals.
-
Development of a Low-cost Pressure Sensor
33-38Views:224In this paper development of a pressure sensor has been discussed. The main benefit of this sensor is relatively cheap compared to commercially available ones. The unit contains a beam type load cell and a pneumatic cylinder. The load cell has 4 strain gauges in Wheatstone bridge configuration in order to convert the change of resistance into measurable voltage. The system is well applicable in numerous circumstances, where digital pressure signal is necessary for control or data acquisition.
-
Potential Impact of Innovation on the Competitiveness of Sports
666-677Views:215Innovation and development activities related to sports and the tools created during the processes facilitate performance sports players (athlete, coach, sports manager) to achieve outstanding results in their field.
The success of sport can have a major impact on the social image of sport and its economic potential, and thus on the future of the sport. In my paper, I undertake to introduce the innovation processes associated with competitive sport and the products that result from these innovative activities, and then examine how and to what extent these supplies influence the economic and professional performance of the sports under investigation.
-
The Effect of Fluxes on the Melt Quality of AlSi7MgCu Alloy
372-380Views:192The presence of inclusions such as oxides, carbides or refractory particles can be harmful to the mechanical and surface characteristics of castings. Inclusion-rich metals result in lower fluidity and feeding capability during casting. Nowadays, solid fluxes are widely used in foundries in order to reduce the inclusion content of aluminium melts. In this study, the effect of four different fluxes on the melt quality was studied. First, the inclusion content of the flux-treated melt, and then the properties of the fluxes (i.e. chemical composition and melting temperature) were examined.
-
Examining the Competitiveness of Fish Products on the Market
151-163Views:83Fish and fishery products are one of the key ingredients in human nutrition and are therefore outstanding in terms of both production and trade. Different processed fish products are available in many countries around the world due to globalization and a fast supply chain. In our study, we examined the market for fish and fishery products using secondary data collection. The data were collected several years ago from the databases of FAO, EUROSTAT, COMTRADE and KSH The comparative advantages or disadvantages of international trade were determined with the help of the RCA index for the role of Hungary and the EU in the world in the case of different categories of fish products. The aim of our research is to compare the fish products of different processing in Hungary and in the EU compared to the international situation, paying special attention to the main exporting and importing countries. Based on the secondary research the study has a detailed the specificities of trade, the trends observed in recent years and the competitiveness of fish products in Hungary and the Member States of the European Union and effect relationships behind the RCA-index results.
-
Production of Liquid Hydrocarbons from Plastic Wastes
345-350Views:120Thermal pyrolysis of HDPE, LDPE, PP and PS plastic wastes were performed in a batch reactor and the yields of pyrolysis oils and liquid transportation fuels prepared by atmospheric distillation were determined. The gasoline fractions were tested in a traditional spark-ignition engine without any modifications or fuel blending. Fuel consumption and exhaust gas emission (NOx, CO) were measured and compared to a commercial fuel (RON = 95). PS generated 70.5% gasoline range hydrocarbons from the solid waste, followed by PP with 42.1%, LDPE with 40.8% and HDPE with 37.3%. The fuel consumption was reduced by 9.1-9.4% in the case of PS compared to reference measurement. Reduction in fuel consumption was noticeable at HDPE, LDPE and PP as well. PS gasoline decreased by 91-96%, while HDPE, LDPE and PP more likely increased the CO emission of the engine compared to commercial gasoline. The results show that pyrolysis of plastic wastes is a promising method to generate value added liquid transportation fuels and reduce the footprint of waste accumulation in landfills.
-
About Gamification & What Do We Use for Nowadays
171-180Views:787By the widespread increase of new technologies, Internet has become an essential element for generation Z, however, this is not particularly surprising given the fact that over recent years different IoT solutions have become widely available, well-known and increasingly cheaper. Thus the grown up of Net Generation brings innovative solutions to the fore by which motivation is not forced to students anymore but there will be a real internal demand from their side in accordance with the age of Motivation 3.0. If this will be the case, the social issue of Homo Ludens will be also appeared in parallel to gamification [1]. Gamification nowadays is a method that become more widely used depending on field of use, thus it may meet needs of businesses and also educational institutions. The term of gamification is understood to mean those technics and methods when game elements are used in non-gaming environments [2]. Since we do not concentrate on learning during games, students will find learning a pleasure rather than an imposition and it means many could improve their skills or receive information without realizing they are actually studying. Moreover, despite the traditional learning method, the knowledge acquired this way can be used for a long time during seminars and later on labour market. Gamification plays an increasingly important role in business and also in education [3]. Students may learn more effectively and with a lower effort using gamification. As a result, this innovative approach of learning has been becoming more and more popular internationally, furthermore, motivation shortage problems also could be solved by this method [4].
-
Development and Characterization of Sisal Fiber Reinforced Polypropylene Composite Materials
348-358Views:369In most of the developing countries, plastic polypropylene is not fully recycled and converted in-to use after it is once used. Sisal fiber is also widely available in different developing countries like Ethiopia. Adding this two materials and developing automotive interior part was taken as a primary motive for it reduces cost and is environmentally friendly. Thus, the main purpose of this research is to develop composite material from natural fibre (sisal fiber) reinforced with recycled plastic waste (polypropylene) for interior automobile accessories specifically for internal door trim panel application. This research examines effect of fiber length, fiber loading and chemical treatment of fiber on the physical and chemical properties of the sisal fiber reinforced polypropylene (SFRPP) composite material. The waste polypropylene and the treated and untreated sisal fiber with variable length and weight ratio (fiber/matrix ratio) were mixed. Flammability of sisal fiber reinforced Polypropylene (SFRPP) composites material was examined by a horizontal burning test according to ASTM D635 and chemical resistance of the sisal fibre reinforced PP composites was studied using ASTM D543 testing method. The result on the flammability test shows that treated fiber has lower burning rate than untreated fiber and decreases with increase in fiber length and fiber loading. The resistance of the composites to water has increased as the fiber length increases and decreased as the fiber loading increase. Generally, SFRPP composite is found to have better resistance to water than NaOH and H2SO4 and treating the fiber has brought considerable improvement on chemical resistance of the composite. Fiber loading and fiber length has positive and negative effect on the flammability of the SFRPP composite respectively.
-
The Top 5 e-commerce Competitive Advantages in Hungary
128-139Views:193Abstract. In my article, I map out the key competitive advantages that are essential to online commerce, online store sales, success, and popularity. There is a wealth of literature on the subject. Year after year, more and more research and surveys are conducted on customer value, shopping habits, consumer behavior, digital transformation, which I would like to summarize and articulate, and highlight the main elements without which online sales would not be effective.
