Search
Search Results
-
Latest Trends and New Tools Being Used in Strategic Management
73-85Views:763In today’s rapidly changing world, there is an increased need for excellent strategic planning. A firm’s survival may indeed hinge on the firm’s planning process being exemplary. Various aspects of the strategic planning process are under review today as organizations wrestle to compete more effectively in an ever-changing world. This paper reveals and describes five new trends or tools being utilized today by firms to more effectively engage in strategic planning. Specifically, the new trends and tools to be discussed in this paper are as follows: increased need to follow a strategic planning model; increased need to develop quality vision and mission statements; a new improved method for incorporating SWOT analysis into practice. Utilizing two matrices one internal and one external to provide a less biased way to access the current strategy fit with conditions facing the firm. Explain the use of a decision matrix commonly called the QSPM (Quantitative Strategic Planning Matrix) for assessing the relative attractiveness of various strategies being considered for implementation. The purpose of this paper is to familiarize readers with basic new tools and techniques being used by organizations to effectively develop an improved strategic plan for the firm.
-
Construction Solutions for Reducing the Effect of the Rear-end Collision
Views:156Analysing the accident statistics, we can detact that, the improvement of the transport safety is one of the most important engineering task. The number of the vehicles in the trasport gets significantly higher from year-to year, and the infrastructure of the cities frequently can not coordinate already it. Therefore the increasing of the vehicles’s number naturally involves the upgrowth of the accidents occasions too. The aim of the improvement of the vehicle-construction to reduce the personal injured and death resulted accidents number in contrast with the increasing traffic performance. This study analyses the construction options for reducing the effect of the rear-end collision whiches are concentrated for the passive vehicles and its passengers firtsly. Among the actual car manufacturers applied solutions, foward-looking possibilities and suggestions are described in this publication. The development can not be concentrated for only the safety improvement, the mass-optimalization must be completed simultenously. These apparent contrary requirements can be completed with application of new materials. Therefore the study addresses the more optimal utilization of the meatl foam in the vehicles crushbox. In addition, an optimized break-assist solution is described based on the Mercedes developed Pre Safe Plus® system to increas the abrorbtion of the impact energy.
-
Investigation of the Eigenfrequency of the Bending Vibration of the Beam Clamped at Both Ends Around the Principle Directions of Inertia Based on a Single-Degree Freedom Model and a Finite Element Method Analysis
69-79Views:215In this study, we have dealt with the calculation methods of the eigenfrequencies associated with the bending vibrations of rectangular-shaped beams clamped at both ends. Said eigenfrequencies were determined analytically in the single-degree of freedom model of the beam and the case of the three-dimensional solid and three-dimensional rod models by finite element modal vibration analysis. We presented the calculation method of the characteristics of the analytical model and then calculated the eigenfrequency for a concrete example. We have described the concept of modal characteristics, and in the following, we have determined its natural frequency based on the solid-beam and rod models of the former beam. We calculated and compared the solutions belonging to the models recorded in different ways in 11 additional cases of the presented methods.
-
Safety Index Based on Geometric Probability Is Proposed to Represent the Uncertainty of Soil Parameters for Spread Foundations
43-52Views:140The overall factor of safety in geotechnics can be defined as the product of four partial factors of safety. One of these partial factors represents the uncertainty of the soil parameters. Based on geometric probability, a safety index is proposed to calculate the uncertainty of the soil parameters for spread foundations. Numerical examples have also been presented.
-
Practical Application of Methods in Strategy-Based Analyzes
59-72Views:484Increasing environmental volatility is a growing challenge for companies and businesses. The speed of economic events is changing, and the risk of uncertainty is increasing, requiring business to take a new approach to strategic planning. In the design and forming of their strategy, both the factors of the external and internal environment and the analysis of their competitors can be based on well-chosen methods. We consider the review of these methods, their application in planning and educational practice. The aim of our work, in which we present the methods that underpin the strategy applied in both domestic and international practice. The analysis of the external environment illustrates the construction and applicability of an external factor analysis matrix based on traditional PEST analysis and the Porter's five-factor model. In the case of internal factor analysis matrix, we focus on the approach of method choice, and on the applicable methods, the importance of the resource-based approach, the analysis of key factors and the Porter value chain analysis matrix. The third pillar of the analysis that underpins the strategy is the matrix-based assessment of competitors. The applicability of the methods depends on the form of the enterprise, the field of activity and the nature of its activities, which is complicated by the emergence of new economic spheres (e.g.: sharing) and transformed power relations.
-
Modernisation of FESTO MPS Station with Implementation into Cyber-Physical Space
10-14Views:158In the course of our thesis we dealt with the implementation of a manufacturing cell. For this we used the FESTO MPS modules. The production cell is controlled by a PLC. We have not only implemented a unique layout and workflow), but also added new features to the system. This means using two control units, one of which is responsible for controlling the process, while the other is managing a web interface. On the web interface, you can see the warehouse containing the finished workpieces and order palettes assembled from different workpieces, or you can set the type and quantity of workpieces to be stored in the warehouse
-
Industry 4.0 Concept and Key Elements
100-111Views:266Growing and constantly changing international competition, increasing market volatility and demand for increasingly customised products (personalised manufacturing), and shorter product life cycles create significant challenges for companies that traditional production systems can no longer meet. Industry 4.0 is a new manufacturing paradigm focused on creating intelligent products and processes. The focus has been placed on achieving fully effective customised production under conditions suitable for mass production. Make-to-order replaces make-to-stock. Despite the growing interest in Industry 4.0, it is still not a consensual concept. There is no clear idea about this new manufacturing paradigm, so I attempt to present the available definitions of Industry 4.0 through the presentation of the scientific literature, declare the concept's technical elements, and present them in detail to get a clearer picture of the concept.
-
Numerical analysis of effects of an open-pit coal mine to groundwater
70-74Views:123In this study we investigated the hydrogeological problems of an open-pit brown coal mine in the Borsod coal basin with Processing Modflow software. The coal mine is located in the valley of the Sajó-river with high transmissivity overburden layer where the traditional dewatering solutions were not encouraging due to inrush risks and low cost-efficiency. A new way of barrier forming was found out and numerically simulated to prove the efficiency of the solution. Since there are several contaminated sites in the surroundings it was a key factor to assure that the new mine dewatering technique has only a negligible effect on the groundwater regime that undisturbs the known contaminant plumes nearby.
-
Enclosed Garden
25-33Views:191The archetype of the enclosed garden is the medieval hortus conclusus, which make the perfect type from the former types. The enclosed gardens of nowadays have developed from the hortus conclusus, which behave like a prism. Peter Zumthor's Serpentine Gallery Pavilion is the best example for the contemporary hortus conclusus. The purpose of our study to make a typological collection about contemporary enclosed gardens. The base of the typology is the borderline of the garden, the wall of the garden. We based the study of borderline to Dom Hans van der Laan's architectural theory and his monastery building in Vaals. We analyze the typology by six contemporary enclosed gardens from the simple wall to the building volume through the volumes of the wall. The openings of the walls can be the next way of our analysis.
-
On Institutional Services from Foreign Students’ Perspective – What Makes a Higher Educational Institution Multicultural?
343-363Views:154Higher education is of the utmost importance in terms of the competitiveness of every nation, including the Hungarian economy, therefore it is considered determinant for the future to survey student mobility of foreign students pursuing their studies in Hungary. Demographic decline that is characteristic to Hungary, already makes its influence felt in higher education, therefore internationalisation of institutions is of essential importance in terms of their operation and sustainability. Currently, it cannot remain unmentioned that it is a question of vital importance for domestic higher education institutions – and this process might only be further strengthened in the future – how they are able to compensate declining domestic demand by making their workshops attractive to foreign students and researchers.
-
Consumer Perception of Electric Cars in Hungary – Theoretical Considerations and Empirical Results
1-23Views:461Electric cars are becoming increasingly popular in the automotive industry and among consumers; partly as a result of their environmentally friendly characteristics. The aim of the study is to compare the main characteristics of electric and conventional cars in the context of environmental protection. In the first half of the study, we present the life cycle of electric and conventional cars and we compare the overall environmental impact traditional an electric vehicles. We point out that although the operation of an electric car does not pollute the environment locally, the manufacture, charging and disposal of batteries required for operation raises several issues related to environmental pollution. In the second part, we examine the respondents' attitudes towards electric cars based on our own questionnaire research. On the basis of the answers, it can be said that consumers still consider electric cars expensive and are aware that electric cars address some pollution issues to a small extent.
-
Tribological Behaviour Comparison of ABS Polymer Manufactured Using Turning and 3D Printing
46-57Views:197Additive and subtractive manufacturing of Acrylonitrile Butadiene Styrene (ABS) were employed for fabricating samples. The Additive manufacturing was represented through 3D printing, whereas subtractive manufacturing carried out by Turning. Some developments have been applied for enhancing the performance of the 3D printer. Tribological measurements of the turned and 3D printed specimens have been achieved. Studying the difference between static and dynamic friction factors and the examination of wear values were included. A comparison of the tribological behaviour of the turned and 3D printed ABS polymer has been investigated.
-
Experimental Study of Connections with Hardwood Studs
26-34Views:140Attitude change is needed in design of timber structures. Truss girder made of timber elements wi th small cross sections can be used on large spans. Constructing structures with the use of these prefabricated trusses reduces the need of in-site work, and makes the use of ti mber structures economic. Rods of truss can be connected with the use of hardwood stud. On this way all steel components can be eliminated from the truss, so it can be used in aggressive environment as well. Dowel type connection, with hard wood stud is the subject of the present research. Hardwood studs were investigated individually and also as the part of separated connections of the truss girder.
-
Analysis of a Special, 3D Metal-Printed HPDC Tool Material
251-265Views:190High Pressure Die Casting (HPDC) is still the most productive metal-casting method of our time, however the more demanding are the industrial expectations, the more challenging it becomes to ensure the creation of the difficult cavity geometries and the thermal balance of the die-cast tool. New perspective is required, thus we can utilize high heat-conductivity tool steels and additive manufacturing technology.
-
About Gamification & What Do We Use for Nowadays
171-180Views:879By the widespread increase of new technologies, Internet has become an essential element for generation Z, however, this is not particularly surprising given the fact that over recent years different IoT solutions have become widely available, well-known and increasingly cheaper. Thus the grown up of Net Generation brings innovative solutions to the fore by which motivation is not forced to students anymore but there will be a real internal demand from their side in accordance with the age of Motivation 3.0. If this will be the case, the social issue of Homo Ludens will be also appeared in parallel to gamification [1]. Gamification nowadays is a method that become more widely used depending on field of use, thus it may meet needs of businesses and also educational institutions. The term of gamification is understood to mean those technics and methods when game elements are used in non-gaming environments [2]. Since we do not concentrate on learning during games, students will find learning a pleasure rather than an imposition and it means many could improve their skills or receive information without realizing they are actually studying. Moreover, despite the traditional learning method, the knowledge acquired this way can be used for a long time during seminars and later on labour market. Gamification plays an increasingly important role in business and also in education [3]. Students may learn more effectively and with a lower effort using gamification. As a result, this innovative approach of learning has been becoming more and more popular internationally, furthermore, motivation shortage problems also could be solved by this method [4].
-
Gamification in the field of human resource, a creative solution for recruitment
373-382Views:665With the introduction of latest tools and the expansion of technological solutions, the usage of smartphones ,with instant internet connection of course, has become an essential part of the net generation, also known as generation Z. At the same time, the role of IoT devices has also become part of our daily lives, completing and sometimes making it easier. This is due to the fact that the tools become more and more cheaper as time passes and parents and young people no longer consider these a technical innovations, but as a necessity. These generations; Y, Z and Alpha appear simultaneously on today's job market, which poses a serious challenge to future HR leaders and recruiters. Because of the generational gap between them, both motivational and demanding, novel solutions are becoming increasingly appreciated in this area as well. The purpose of this study is to demonstrate the potential of gamification and to highlight the its major areas, as well as to draw the attention to "good practices" in creative recruiting through better known examples. In addition, I also tried to point out the effect on the relationship between motivation and flow-experience. The gamification method is becoming more and more popular in our country, as it plays an increasingly important role in business and education as well. In recent years, with the use of serious games, there have been several examples of HR recruitment and selection, which clearly strives to reach out to younger generations.
-
Napenergia használata villamosáram termelésre egy családi házon vizsgálva
1-12Views:144In this paper we compare the naturalgas and solarenergy utilizatio nwith the help of SWOT analisys. Than we are presenting the solarpower utilization devices and system installation in economic point of view. And two payback calculation method is demonstrated on a family house.
-
Experimental Study on the Effect of the Geometry of Punching Tool on Clinch Joints
154-158Views:129In this study the effect of the punching tool’s geometry on aluminum alloy clinch joints is analyzed by experiments. Based on FE simulations the tip radius and the cone angle of the punching tool is changed, and their effect was analyzed by microscopic investigations and single lap tensile-shear tests.
-
Home 4.0 – Intelligent Houses
53-57Views:221To understand “Home 4.0” you must know about the industrial revolutions, specially about the fourth one, which is often called “Industry 4.0”. The automatization process and the mapping of mechanisms and resources in the cyber-physical space are getting more and more popular in the households. From there comes the term in the title. Analysation of the currently used smart home technology was made and a model that simulates real life events with smart home criteria was created. The model is controlled by a central control unit, the front panel and program of which is also created. Important features such as lighting, heating, cooling and security system, fire protection, controlled consumer electronics, sprinklers and motors came true.
-
Sports Civic Organizations-Subsidies and the Subsidy Exposure
341-347Views:146When we discuss the topic of civic organizations, especially sports profile civic organizations we need to note and comment that issue how these organizational forms are able and capable to accept subsidies. The related data of the Central Statistical Office (KSH) highlight the phenomenon that incomes of the classic civic organizations are mainly composed of state or private source donations. Although there is a really and pretty predictable subsidy system in the field of civic sphere currently, from one hand the distribution of the single subsidy forms considerably vary, on the other hand it result in the considerable amount of available financial resources. The fact whether subsidy forms and subsidy incomes have relationship with the addition alvariables of the organizational operation, such as subsidies provided, employment relationship, and expenditures may acquire special attention at the management of organizational operation together with the planned strategic interventions in the field of the civic sphere.
-
Vállalkozói képzés a 21. században a felsőoktatásban – lehetőségek, módszerek, jó gyakorlatok
1-18Views:495Challenges of the 21st century require answers from higher education as well. In Europe, most of the entrepreneurship programmes on the higher education institutions are less than ten years old. Whilst business studies may battle for academic legitimacy, it has a clear advantage when it comes to graduate employability. The aim of this paper is to give answer to the following questions: why entrepreneurship education is important, what are the methods which are already used and what are the results of them. The answers to the questions are based on literature reviews, a case study and in-depth interviews with alumni carried out at the University of Debrecen, where since 2010 Team Academy Debrecen, a new education model from Finland is implemented. Tiimiakatemia education is an innovative Finnish model founded in 1993 by Johannes Partanen that develops team entrepreneurs. Based on the results some of the important elements of entrepreneurship teachability are: learning by doing, passion, learning in teams, coaching and mentoring.
-
Examination of Student’s Motivation to Participate in E-Sport
389-398Views:393The basis of our research is the popularization of e-sport and its significant development. Compared to many other sports, e-sport is not only a sports game, it is also a dynamically developing business in which the market success of its stakeholders depends to a large extent on its ability to recognize the needs of its stakeholders, sportsmen, the public and sports clubs. In our research we are looking for the answer to the question of students' attitude towards e-sports and what motivates them to spend more time with e-sports. Among other things, we have found that students are intrinsically motivated, besides getting their own pleasure, meeting themselves, it is very important to gain experience and to constantly develop themselves, to learn more new techniques and methods with the given e-sports game.
-
Laboratory Testing of Rediffusion of Contaminants Using DKS-Permeameter
41-48Views:145Decades long hydrocarbon contaminations effecting heterogenous groundwater systems is a common problem both in Hungary and worldwide. Only the treatment of aquifer layers is possible with remediation technologies, so the contaminations remained in the aquitards are released back to the treated porous layer after the treatment due to the changes in concentration-gradient. This process is the so-called back-diffusion: as a result, the previously removed contaminations appear in the remediated layer again. In order to get better understanding of the rediffusion process and the influencing parameters series of measurements were carried out at the University of Miskolc Faculty of Earth Science and Engineering using a special laboratory device called DKS-permeameter. With the help of some small modifications it can be used for the modeling of backdiffusion. Artificially contaminated soil samples were built in the DKS-permeameter from which contaminanant release occured due to back-diffusion. The concentration values were determined with spectrophotometric measurements.
-
Material Stock and Flow Analysis within the Agricultural Building Sector Based on Local Database
297-320Views:141The purpose of the paper is to analyze on micro level the stream of building materials needed for raising cattle. The scope of the produced material flow chart will cover the inflow and storage of the materials. The overall objective of material flow analysis is to contribute to the data inventory development process which is needed to use these construction materials as secondary raw materials in the future. The assessment is based on a concrete new development in a Hungarian region being carried out nowadays as a development and modernization of an existing cattle raising farm. Driven by the concern of resource depletion, further research on higher level, based on larger database will be needed to verify the estimated national level results for the magnitude of growth of anthropogenic stocks.
-
The Relationship Between Sports Civic Organizations and Human Resources
146-154Views:225Every spring the Hungarian Central Statistical Office records through its ELEKTRA database system the human and economic related operation data of the past year of civic organizations. This data source is usually considered as a standard at the evaluation of the domestic civic sphere. Still, the available handout titled “Most important features of the non-profit sector”, applying mainly descriptive statistics only provides a brief picture of specifications of the sector. Parallel with it, its background database is available yearly, which provides a unique possibility for a researcher to perform secondary analysis aiming to reveal deeper relationship. The objective of our study is purely to reveal a minor part of this considerable field, the relationship between subsidies and human resources mainly due to the fact, that human resource in this sector is composed of employees and volunteers, and it is questionable whether subsidies have an impact on employment. Results revealed that there is a relationship between human resources and subsidies, where mainly private nature subsidies have a strong impact equally on voluntariness and work related employment
