Search
Search Results
-
Interchange of Heat in Saw Disc Body During Cutting
488-494Views:277The paper presents the experimental results of a research aimed at the distribution of the temperature on the circular saw blade body. The temperature was measured at two distances from the centre of the circular saw blade body (70 mm, 140 mm) by means of an infrared thermometer. Two circular saw blades with the diameter of 350 mm and a variable adjustment of the body (with slots and without the coating, with both slots and coating) were used for the longitudinal sawing of the spruce wood (Picea excelsa) with the thickness of h = 37 mm. Feed speeds ware vf1 = 14 mpm, vf2 = 17 mpm and vf3 = 20 mpm. Cutting revolutions n = 4100 /min. were constant. The measured temperature was in the range from 21 °C till 27 °C. The highest measured temperatures were recorded on the circular saw blade with the slots and coating.
-
Efficiency Analysis of Production Management System
401-415Views:329Due to the continuously evolving technology, even more escalating market competition has emerged between the companies. This competition is not only about the logistics related processes, it also appears to be significant for the production since the manufacturing companies form the center of global sale streams and without them the items found in logistical processes cannot be created. The role of production’s optimization and efficiency in the supply chain continuously grows since this is the part where a company’s most cost is produced. Our research objective was the examination of a company that applies various manufacturing, assembly technologies, and the used tools and softwares for this purpose were the SAP Business One ERP system and it’s add-on, called PPS One, the latter originated in Switzerland. We used these softwares to provide solutions to companies, especially to those that are dealing with manufacturing and production, for the optimization of their workflows, operations, supervising and controlling of their material. We also monitored from production technology’s elements the capacity planning, production orders, schedules, production tracking and cost accounting. We have made proposals during the analysis that might improve the company's strategy, competitiveness and increase it’s efficiency in business, and at the same time they can facilitate the company's pricing and inventory management activities.
-
Policy Gaps and Health Risks: Addressing Women’s Indoor Air Pollution Exposure in Pakistan
109-121Views:55Indoor air pollution currently poses a significant challenge, adversely impacting both the physical and mental health of women. The substantial use of fossil fuels for domestic chores endangers women's health and exposes them to considerable risks. In this regard, this study elucidates the factors driving the use of fossil fuels in domestic kitchens in Pakistan. The association between primary indicators such as women's health, duration of women’s current pregnancy, and pregnancy status with household air pollution is analyzed. We use Ordinary Least Squares (OLS) regression in Stata, and the results indicate that the type of cooking fuel significantly affects women's health. Furthermore, indoor cooking also negatively influences the duration of pregnancy. Based on these results, the paper provides practical policy recommendations for governments and policymakers to mitigate health risks. This study is instrumental in analyzing the current state of household air pollution, offering a robust model for countries heavily reliant on fossil fuels, and examining the consequent health impacts on women.
-
Analysis of Abrasion of Hot Metal Powder Spray Coated Layer
342-346Views:322By the application of the tradicional overhead welding and the different powder coating technologies results a new surface with improved abrasion resistance, we can optimize the dimensions of the part or we can rebuild some surface as a kind of repairing technology. By application of this technology we can avoid the replacement of the total expensive parts of the structure. Opposite to the tradicional overhead welding in this case there will be diffusion connection between the raw material and the surface coating, this connection type shows several positive properites. Our goal is to investigate the abrasion resistance of the coating. In this article we would like to introduce our results of the abrasion test by apllication of different powder coatings.
-
HAZ Characterization of Automotive DP Steels by Physical Simulation
478-487Views:367DP steels were extensively used in the vehicles industry due to its extraordinary combined properties of strength, ductility, formability and weldability which contributed great significance in reducing strength to weight ratio and CO2 emission. High strength steel i.e. DP steels (3 different grades) were experimentally investigated and thermophysically simulated using Gleeble 3500 simulator to determine softening and hardening in heat affected zone. Samples were heated to different peak temperatures (1350 °C, 950 °C, 775 °C and 650 °C), two cooling time (t8.5/5 = 5 s and 30 s) and Rykalin 2D model were selected. The hardness and microstructure of the specimens were tested and analysed. For longer cooling time (t8.5/5= 30 s), we observed that softening occurs in all grade of investigated DP steels to all sub-regions. But for shorter cooling time i.e. t8.5/5= 5 s the softening is higher in intercritical HAZ compared to other sub-regions for all the types of DP steel with short cooling time (t8.5/5 = 5 s). However, the hardening zone in the CGHAZ occurs when Tmax is 1350 ºC for DP600, DP800 & DP1000 steels but it is more prominent in DP800 as compared to others two steel grade.
-
Investigation of the Resistance Force Acting on a Sailing Craft in the Case of a Change of Draft Caused by a Change of Powertrain Using Numerical CFD Simulations
30-35Views:382Nowdays In the case of recreational craft, interfering with motor drive solutions is a common workflow due to increasingly strict rules for environmental reasons. When switching from an internal combustion engine to an electric engine, the change in draft varies from boat to boat, but it can be said in all cases that as the mass changes, so does the draft. Because of this, the magnitude of the resistance force acting on the ship also varies. In this paper, we examine, through a specific example, the benefits of a change in dive caused by weight gain at different travel speeds.
-
Comparative Analysis of the Notes on the Accounts Of Information-Technology Servicing Companies in Hungary
186-194Views:441In the globalized and accelerated world of our time, challenges can only be met by companies that possess the necessary information and are able to convert it rapidly into organizational knowledge. Annual accounting statements are an important source of information within business relations among companies. The necessary information can only be obtained from the two fundamental parts of the annual statements (balance sheet and profit and loss account) if the notes on the account contains the information that contribute to the more comprehensive interpretation of the other parts of the annual statement. Decision-making based on inadequate knowledge further increases economic risks that are already high. In our research, we examine whether the notes on the accounts of companies include the information, which could help obtain necessary financial knowledge concerning the partner companies. For the analyses, we used the notes on the accounts of companies, which have information-technology services (Hungarian NACE No. 62) as their main line of business. By means of text mining, we analyse the extent to which the notes on the accounts are in conformity with the Accounting Act.
-
Framework of Industry 4.0 Technologies
213-223Views:1759The increasing competition and globalization have changed the micro- and macro environment of companies worldwide. The number 4.0 marks the fourth industrial revolution, bringing information technology and automation closer together leading to fundamental changes in production methods. It is not only about the penetration of technology but also about the paradigm shift in business processes. Industry 4.0 is becoming a daily reality for domestic companies as well, giving rise to the era of high-level interaction among production resources and different players. Industry 4.0 will transform the structure of production and change global competitiveness giving enterprises new opportunities to create added value. In my study I presented the concept of Industry 4.0, its framework and innovative technologies. I described the intelligent logistics solutions and the most important advantages of Industry 4.0. Essentially, the use of these tools include in addition to the explosive development of industry the digitalisation of the entire economy affecting society as a whole. It is of great importance that small and medium-sized enterprises also respond to new technological opportunities otherwise will significantly lagging behind in the digital transition.
-
The Implementation of the Japanese and the German Culture into the Operation Hungarian Firm
1-9Views:383How can the Japanese culture be implemented into the operation of a firm - partly a German property working in Hungary. In my presented arcticle I have studied various organisational culture models, and compared them to the culture of our enterprise, seeking for similarities and contraries. I have studied the environmental factors and resources which have an effect on our production. During the investigation I have also considered how can we harmonize cultures of different nations and how it affects the production on the whole. I have also investigated the installation of robots, and searched for the solution how we can make our production much more economical. Due to the persistent decrease of population, and leck of professionals, the use of robots is neccessary to fulfill the customer requirements in time, with the sufficient quantity and required quality of goods. According to the Japanese Toyota-method,theautomatization of a technology can only be successful, if it is tested at least ten times, but –beacuse of the leck of time- we do not have the possibility of it. As the manufacturing parameters and observations have not developed the proper way, the scrap rate is higher than it is at firms, where is more available time for the building up of the technology.
-
Generative Design of a Mechanical Pedal
48-58Views:1228Nowadays, there are various tools that support the initial stages of design available to use for engineers, the traditional Computer-Aided Design (CAD) has been implemented in the engineering components design and replaced manual drafting. However, with the advances and the rapid technology development, new trends emerged to cope with this evolution, namely, Generative Design, Topology Optimization, and Generative Engineering Design. The method is based on numerical algorithms that generate a variety of design and modelling options based on the criteria and constraints set by the designer to allow further design exploration. Proposed in this paper is an implementation of the generative design of a mechanical pedal with further finite element analysis.
-
Reducing the use of chemical for biological wastewater treatment by technological modification
107-113Views:234In the Wastewater Treatment Plant of Debrecen Waterworks, the experts working there fight daily with various problems typical of the Hungarian plant. Suitable denitrification requires the administration of an organic substance in many cases containing biodegradable organic matter. Between January 1 and December 31, 2017, 183.1 t of organic matter was needed. It was important to develop a solution for the site's specialists to ensure efficient biological wastewater treatment without the need for additional carbon input in the technology. We have also supported calculations to ensure stable denitrification irrespective of the fluctuating C/N ratio of incoming sewage. Thus, it would be unnecessary to add up to 200 tonnes of organic matter per year to the technology without which biological wastewater could be achieved.
-
Examining Drone Logistics Solutions in Retail
48-61Views:327The possibilities of using drones in transportation will be determined by the capabilities of drone technology, legislation, various advocacy and trade unions, and the degree of general acceptance. Technology and infrastructure are given, customer habits and needs are favourable, and emissions generated by packets moving between two points are growing steadily. Despite these favourable conditions, the effects of drone use should be thoroughly reviewed. The environmental impacts of the project were analyzed by PEST analysis and the main influencing factors were studied using the Porter model. Concluding our results based on questionnaire surveys and feasibility examinations of fast food delivery, it can be said that a system based on drones can efficiently be operated and cost-effective using round trips, however, the legal issues and uncertainties that arise in the delivery of drone hippers remain a very significant hindering factor for a long time.
-
Decision Support for Difficulties in a Furniture Manufacturing Company
405-418Views:259In “Decision support for difficulties in a furniture manufacturing company” titled work we are presenting in detail the operation of a particular furniture company and the difficulties encountered during its operation, which they try to overcome in some way so that they do not hinder the operation of the company. After that, we will show how we wanted to achieve the production support system. In different versions, we detail what we actually wanted to accomplish while showing results that illustrate the evolution of the system. We also present the difficulties of the development, which is made in Java. We also present the latest version of the system and its results. After processing the input parameters, the system is able to produce results using scheduling algorithms that can help in making important decisions during production planning.
-
The CAD Modelling Possibilities of Gear Pairs by Two Ways in the Mechanical Engineering Practice
205-219Views:274The GearTeq 2021 software is a complex gear designer software which is capable to design different types of gears based on the initial geometric parameters by the user. Naturally, the users’ appropriate knowledge for the gear theorem and the manufacturing technology is indispensable for the design. The possibilities of the software are shown in this publication. The designed gear pairs are usable for different engineering fields (robots, working machines, vehicles, etc.).
-
Ultrasonic Powder Atomization for Additive Manufacturing
69-75Views:469The following article presents a special case of metal powder production, ultrasonic metal atomization. In this case, ultrasound technology is based on the capillary wave phenomenon. We verify the suitability of the produced powders for 3D metal printing with various tests. In the case of prints with a metal powder bed fusion (PBF), the properties of the raw material of the powder are extremely important. The main results of the tests carried out in the article (SEM images, EDS composition analysis, sieve analysis) were described.
-
A Slurry-Pot Abrasive Wear Test Device for Several Composite Materials
437-444Views:229To choose the proper material for agricultural machinery we tested several materials with abrasive cloth on the pin-on-plate test device. After having the pre-results, we launched more complex abrasive testing (slurry-pot) simulating more realistic mode with soils to investigate the abrasive wear mechanism and resistance of the selected up-to-date polymeric structural materials. for this, we developed a modified slurry-pot test machine that ensures the comparability of the materials over a wide range of conditions. Through this device, several parameters could be controlled like speed, the soil particle’s hit angle on the tested surface.
-
Flexibility Analysis Of Inventory Cost Model With Ergonomics
166-173Views:274The economic and environmental sustainability issues in supply chain management have integrated by many researchers in the past decades. The ergonomics as a social aspect of sustainability had received a little attention by researchers. Therefore, the aim of the paper is analyzing the flexibility of developed inventory cost model with relaxation allowance and endurance time as a social aspect of sustainability. The effects of distance, unit weight of item and total number of items on relaxation allowance, the total cost of logistics operation and the EOQ model were investigated. The analyzed mathematical model was a single operator-single material model which covered transportation of fixed amount of raw materials from storage plant to production plant by manual material handling with simple cart and picking, storing, pushing and pushing back with empty cart for manual handling of the products. The different parameter values applied for analysis such as total amount of handled items (Q) changes between 500 pcs to 2750 pcs, unit weight of item (w) changes between 0.1 kg to 1 kg, distance of movement by manual material handling for picking and storing motions (d1) changes between 2 m to 3 m and the distance between the storing equipment and the supermarket of the production line for pushing motion (d2) changes between 15 m to 20 m. The results of the analysis indicated that the longer the distance of movement for all motions leads to decrease in savings of the model compared to EOQ model. The increase in unit weight of item is increase the savings obtained from application of our model and decrease the optimal lot size. There was no specific change on savings or optimal lot size as the total amount of handled item is increase. The compared results indicated that an increase in d1 and d2 lead to an increase in optimal lot size and increase in total cost of the model. Consequently, the analysis has shown that a decrease in lot size would be the better way to improve both ergonomic conditions and total cost of production in any different parameter values. Finally, the analysis of the inventory model with ergonomics were proved that this model is suitable for different industrial practices.
-
Labour Economics - From the Technological Development Perspective
98-108Views:269The impact of technological advancements on the labor market and innovation processes is a critically important research area. The aim of this study is to examine the emergence and frequency of technological innovations in scientific publications, with a particular focus on the Journal of Labour Economics from 2000 to 2020. The research employs content analysis methods, searching for eight different terms and expressions related to technological development (e.g., technology, artificial intelligence, machine learning) across 1405 articles. The study also analyzes the number of occurrences and annual publication trends of these terms. A total of 9469 instances were identified, indicating that in 64,7% of the cases, at least one technological term appeared. An analysis of annual trends reveals an increase in the usage of certain keywords (technology, artificial intelligence, and machine learning). In a smaller subset of articles, only 1%, technological terms were mentioned at least 50 times. The results suggest that although the topic of technological development plays a significant role in labor market research, the frequency of its appearance and the depth of analysis vary considerably. The increase in the appearance of technological terms is predominantly observed in the fields of artificial intelligence and machine learning. These findings are specific to a single journal, indicating the need for further research involving other labor market journals to ensure representativeness.
-
A Literature Review: Artificial Intelligence Impact on the Recruitment Process
108-119Views:22221This paper aim is to review the implementation of artificial intelligence (AI) in the Human Resources Management (HRM) recruitment processes. A systematic review was adopted in which academic papers, magazine articles as well as high rated websites with related fields were checked. The findings of this study should contribute to the general understanding of the impact of AI on the HRM recruitment process. It was impossible to track and cover all topics related to the subject. However, the research methodology used seems to be reasonable and acceptable as it covers a good number of articles which are related to the core subject area. The results and findings were almost clear that using AI is advantages in the area of recruitment as technology can serve best in this area. Moreover, time, efforts, and boring daily tasks are transformed to be computerized which makes a good space for humans to focus on more important subjects related to boosting performance and development. Acquiring automation and cognitive insights as well as cognitive engagement in the recruitment process would make it possible for systems to work similarly to the human brain in terms of data analysis and the ability to build an effective systematic engagement to process the data in an unbiased, efficient and fast way.
-
Impact of Digitalization on Domestic Trade Strategies
318-333Views:1753The aim of our study is to reveal the fit of digital space into current and future trade and to assess the effects of digitization on Hungarian trade strategies. The information gathering and purchasing habits of consumers have changed dramatically in recent years. Consumers today make buying decisions based primarily on convenience, effectiveness (fast and convenient access to products at adequate price/value ratio), and experience. Adjusting to these trends, traders developed novel trading strategies, and the use of achievements of digitization is an integral part of these strategies. One aspect of digitization is the increasing global development of e-commerce. The Hungarian online commerce have also been expanding significantly from year after year: based on 2018 data, domestic and foreign online sales volume have passed 1000 billion HUF. The Hungarian online consumers buy on the Internet more and more often and at greater and greater value. The online shopping on virtual reality platforms may make this purchase mode more experiential. Webshops have to meet new consumer needs, and deliver the ordered products as soon as possible, preferably within 24 hours. An increasing number of parcel delivery options has begun becoming more and more popular (e.g., automatic parcel terminals, pick pack points). However, traditional channels should not be buried, either. Their obvious advantage is that consumers can take their choice based on multiple senses and it also gives them more room for impulse buying. Combined with the digital technology compliant with contemporary requirements, this can offer a complete shopping experience. Nowadays, recognizing this need online and traditional channels have been mixed in several cases (e.g., multichannel, omnichannel, cross-channel sales) and offer several options for consumers during the purchase process. The sales area optimization of traditional shops and the buyer paths aided by digital technology (e.g., digital shelf labels) are designed for the buyers’ convenience. The newest innovations imply automation of the buying process making the whole process more convenient and more personalized with the use of sensors (e.g., Amazon Go) or robots (e.g., Pepper). In our future purchases, digital personal assistants will appear as digital versions of sales personnel.
-
Influence of MTP on Surface Roughness and Geometric Accuracy of Machined Surface at WEDM
91-97Views:280Electrical discharge machining technology is one of the most precise machining methods. Therefore, even the smallest deviation of micro and macro geometry generally has a significant impact on the overall quality of products produced by this progressive technology. The quality of the machined surface after Wire Electrical Discharge Machining (WEDM) is influenced by a large number of factors, most of which are influenced by the Main Technological Parameters (MTP). The aim of the paper was to describe the results of experimental research aimed at assessing the impact of MTP for WEDM on the quality of machined surface in terms of geometric accuracy and roughness parameters Ra and Rz. The samples were made of high alloyed ledeburitic chromium-molybdenum-vanadium steel designated EN X155CrVMo12-1 on a Sodick AQ535 electroerosion machine. The tool used was a standard compact brass wire 0.25 mm with the designation Elecut Brass CuZn37.
-
Utilization of 3D Printing in Replacement of Basic Plastic Workpieces
274-282Views:378In the experiment, a 3D printed cogwheel is made using the FDM technology to replace a broken part in a sewing machine. The aim of the project is to examine if a 3D model can be created and manufactured using only entry-level technical knowledge and tools. By the end of the article, it will be apparent that creating functioning plastic parts with a hobby 3D printer and basic CAD experience is very much possible.
-
Simulation of Hot Rolling by Cellular Automata
190-195Views:344Our research is focusing to one of the most complex and important production step of flat rolled products that is the simulation of hot rolling. During hot rolling two phenomena as work hardening and the process of regeneration of crystals has strong influence for physical properties of microstructure of aluminium alloys. It needs to be taken into account in case of rolling technology steps and development. When we talk about aluminium the dynamic softening in fact it is dynamic recovery that is followed by dynamic recrystallization. It goes in the same order of magnitude rate. But in steels the recovery has only a minor effect. Hot rolled and newly modified grain structure is influenced by these dynamic phenomena. Hot rolled grain structure goes through significant changes under further production steps like cold rolling and heat treatments. But aside from these intermediate production steps the microstructure that we get after hot rolling has significant effect for mechanical and grains structure of the final flat rolled product. Proper technology planning is essential that for cellular automata simulation method can ensure useable and good solution for the simulation of recrystallization.
-
Analysis of the Causes and Effects of Noise from Rail Transport
116-130Views:331Noise emissions from rail transport are a major concern, as they affect both the environment and people's health and quality of life. Among the many sources of noise emissions, rail vehicles and infrastructure are a major factor. With regard to rail noise emissions, it can be concluded that noise effects are influenced by a number of factors. These factors include train speed, track condition, traction technology and the noise abatement methods used. The negative effects of noise exposure include sleep disturbance, stress and mental health deterioration. It also affects the quality of life of people in urban areas and property prices. It should be emphasised that reducing noise emissions from rail transport is key to creating a healthier and more sustainable urban environment. To achieve this, it is important to use modern noise abatement technologies, improve infrastructure and implement noise abatement actions effectively. Transport authorities and railway companies should work together to achieve a more noise-free rail transport, to improve people's quality of life and to protect the environment.
-
Digital Twin and Shadow in Smart Pork Fetteners
515-520Views:458This paper introduces our ongoing research in the field of smart livestock farming. The base idea in this research is to take some industry based concepts, and adapt them into agriculture. In Industry we live the fourth industrial revolution, which is not a technical, but an organization revolution. So in this concept there are two key ideas, which are digital twin, and digital shadow. This article is about creating digital twin and digital shadow of a modern pig fattener. These models are based on the literature, and are identified on the data shared in these. However, these models can’t be used on real systems before identifying them on the actual circumstances. At this stage of research only digital twin of the product was created, and only some aspects of it. This however can simulate an average porkers feed consumption, weight growth and calculate the weight on certain stages of breeding. Further development is ongoing and our target is to make a fully functional model of a pig fattener.
