Search

Published After
Published Before

Search Results

  • A Critical Review of Selected Computer Assisted Language Testing Instruments
    3-6
    Views:
    140

    Over the past few decades, a fairly large literature examining the effectiveness of computer-assisted language learning (CALL) has been developed. The findings indicate that language learners have generally positive attitudes toward using computers in the classroom. Less is known, however, about the more specific areas of computers in language testing. The purpose of this article is to examine recent developments in language testing that directly involve computer use. After a brief overview of computer-based testing (CBT) in general, web-based testing (WBT) is defined and certain issues reviewed.

  • Classification of a diffuse heavy metal polluted mining site using a spectral angle mapper
    119-123
    Views:
    85

    Characterization of heavy metal polluted abandoned mining sites is complicated, as the spatial distribution of pollutants often changes dramatically.
    In our study, a hyperspectral data analysis of the Gyöngyösoroszi abandoned Pb-Zn mine, located in northern Hungary, where Záray (1991) reported serious heavy metal contamination, was carried out using ENVI 4.3. In this area, galena (PbS), goethite (FeO(OH)), jarosite (KFe3(SO4)2(OH)6), sphalerite ((Zn, Fe)S) and pyrite (FeS2) were the predominant minerals in the alteration zones was chosen as the target mineral.
    Spectral angle mapper (SAM) and BandMax classification techniques were applied to obtain rule mineral images. Each pixel in these rule images represents the similarity between the corresponding pixels in the hyperspectral image to a reference spectrum.
    As a result of hyperspectral imagery the distribution of pyritic minerals (sphalerite, galena) in the area was defined. Both of the mineral formations occur, especially in mine tailings, the area of the ore preparatory, and the Szárazvölgyi flotation sludge reservoir. According to the results, jarosite and goethite have similar distributions to sphalerite and galena. The results showed that hyperspectral remote sensing is an effective tool for the
    characterization of Pb, Zn and Fe containing minerals at the examined polluted sites and for modelling the distribution of heavy metals and minerals in extensive areas.
    This classification method is a basis of further detailed investigations, based on field measurements, to map the heavy metal distribution of the studied area and to quantify the environmental risks caused by erosion, which include DEM (digital elevation model) and climatic and hydrological data sources. Furthermore, it can be used primarily to support the potentially applicable phytostabilization technique and to isolate hot spots where only ex-situ remediation techniques can be applied.

  • The effect of zinc fertilization on the yield and element content of ryegrass
    27-31
    Views:
    108

    The effect of Zn fertilization on the yield and Zn, N, P, K, Mg and Mn content of ryegrass was studied in a greenhouse experiment for 8 chernozem soils with three replicates under uniform NPK supply and irrigation. The applied Zn rates were 0, 2.5 and 5 mg/kg Zn. Due to Zn doses the yield incrased significantly. Zn fertilization increased the plant Zn content and decreased the plant P and Mn content significantly. For N, K and Mg there was no significant effect.

  • Interpretation of sustainability in the utilization of renewable energy sources
    61-64
    Views:
    101

    The utilization of renewable energy sources (res) is crucial regarding to sustainable reconstruction of energy systems. The target is a balanced, sustainable development of Hungarian energy management considering equally the ecological, social and economic aspects. There are many different technologies of utilization of res varied by sources, conversion processes, size and products. The comparison of each technology and their sustainability assessment are required by the importance of efficient remodeling of energy infrastructure. The group of attributes was composed by numerous important parameters in the course of our analysis with the choice experiment (ce) methodology. The estimation of each attributes’ influence on the individual’s preferences and choices was possible by this method and the preferences of the statistical population was concluded. So thus the utility derived from each attribute was estimated. The result of the ce analysis for the population of experts is demonstrated in the current phase of our research.

  • The Carpathian lingonberry, raspberry and blackberry fruit extracts feature variable antimicrobial efficiency
    27-32
    Views:
    314

    Wild berry is an excellent source of phytonutrients and/or bioactive compounds associated with significant therapeutic properties, so that they have been utilized in folk medicine and traditional nutrition throughout centuries. Multiple health-promoting effects, such as anti-inflammatory, anti-diabetic, anti-heart and coronary disease properties were attributed to such wild berries. It has also been proved that berries could feature antimicrobial effects that could be of a great importance for the prevention of food-feed poisoning and fighting back antibiotic resistance.

    In this study, we investigated the antimicrobial properties of lingonberry (Vaccinium vitis-idaea), raspberry (Rubus idaeus) and blackberry (Rubus fruticosus) crude and ethanolic extracts prepared from fruits obtained from the spontaneous flora of Eastern Carpathian Mountains situated in Transylvania. The antimicrobial effect of crude and alcoholic extracts were assessed on four Gram-negative, five Gram-positive bacteria and one yeast species using the agar diffusion method. The studied bacteria can cause food or feed spoilage and foodborne diseases. Our results indicate the significant inhibitory effect of lingonberry extracts in the case of Gram-negative bacteria like Proteus vulgaris and Salmonella Hartford, while among Gram-positive bacteria the strongest inhibitory effect was observed for Bacillus species like B. cereus, B. subtilis, B. mojavensis and Micrococcus luteus. The raspberry and blackberry extracts featured milder inhibitory effects in the case of the studied bacteria species. Furthermore, we have studied the crude or ethanolic extract combinations associated antimicrobial effects synergistic/additive or antagonistic properties. Interestingly, the triple and double ethanolic extract mixes had stronger antimicrobial properties, whereas the crude extract mixes showed relatively reduced effects, if any. Our results indicate that the antimicrobial activity of studied fruit extracts obtained from wild berries can vary upon the applied extraction method and their combination formulae, so that all these considerations must be taken into account when such fruit extracts are considered for foodstuff development.

  • Evaluation of tree measurements after the reconstruction of tree-row system in five narrow streets of Debrecen
    217-222
    Views:
    149

    Viable urban environment is largely dependent on the size, condition and distribution of urban green spaces within and around cities. Treerows in streets are one of the most essential elements of urban green spaces. The aim of this study was to evaluate tree taxa compositions and lifespan values of trees in tree-row system with special reference to five narrow streets (Garai, Jókai, Tanító, Csokonai and Zsák) of Debrecen. Tree numbers, tree taxa and the origin of tree taxa were determined in two years (2009 and 2017). As a next step, six selected taxa (Pyrus calleryana 'Chanticleer', Acer tataricum, Sorbus intermedia 'Browseri', Magnolia kobus, Acer platanoides 'Olmsted', and Crataegus x lavalleei 'Carrierei') were further estimated for the following lifespan parameters: i) trunk diameter (cm), ii) tree crown size (m), iii) trunk status (in 0–5 grades), iv) tree crown status (in 0–5 grades), v) estimated tree viability (in 0–5 grades), and vi) tree value in Ft. Our results showed that the numbers of tree taxa were 9 and 11 in 2009 and 2017 as well as an overall 279 and 282 trees were evaluated in 2009 and in 2017, respectively. More than 60% of the trees were native or similar to native taxa. The largest and the lowest trunk diameters were achieved for Pyrus calleryana 'Chanticleer' and for Acer tataricum, respectively. The largest and the lowest tree crown diameters were achieved for Acer platanoides ’Olmsted’ and for Magnolia kobus, respectively. The best and the worst trunk statuses by 2017 were achieved for Pyrus calleryana 'Chanticleer' and for Crataegus x lavalleei, respectively. The best and the worst tree crown statuses by 2017 were achieved for Pyrus calleryana 'Chanticleer' and for Acer tataricum, respectively. The best estimated tree viability status was achieved for Pyrus calleryana 'Chanticleer' and for Acer platanoides. Overall tree values were 2.73 times higher in 2017 compared to 2009. In conclusion, this study clearly demonstrated the importance of appropriate choice of tree taxa for an establishment of tree-row system in narrow street conditions.

  • Economics of site specific crop density in precision sunflower (Helianthus annuus L.) production
    91-96
    Views:
    67

    In this research, the crop density of sunflower was examined, which, thanks to the tools available for precision crop production and knowledge of the market environment of sunflower production, best fits the heterogeneous areas of the given production zones and meets the economic requirements. These components together directly influence the effectiveness of sunflower production. In the year of 2021 and 2022, we carried out a site-specific crop density sunflower experiment in two fields with the same soil type, by sowing significantly different amounts of seeds within the given zones. We have established that the sunflower, although a plant with excellent adaptability, reacts sensitively to the place of production and the effect of the year, in zones with heterogeneous productivity, and shows a reaction to sowing with a variable number of seeds per zone, even when examined based on economic aspects.

  • Evaluation of the microbial soil quality indicators in agricultural soils from Crisurilor Plain
    79-80
    Views:
    99

    The researches were carried out in 2010 and 2011 on the haplic luvisol cultivated in three variant such as: pasture, cropland, and orchards. Based on the total number of microorganisms monitored in the haplic luvisol (aerobic mesophilic heterotrophs, yeast and mould, Actinomycetes, nitrogen fixing bacteria and nitrifying bacteria) was calculated the bacterial indicators of soil quality (BISQ) and was appreciate the bacterial potential of the haplic luvisol. Seasonal analyses were carried out, and annual BISQs have been calculated too. The values of the bacterial indicators of the haplic luvisol in different cultivation conditions (pasture, cropland and orchards) indicate a high density of the bacterial groups in 2010 and 2011. In 2010 the values of the BISQs are included between 3.617 (minimum in autumn, in pasture) and 5.458 (maximum, in spring, in pasture). In 2011, the minimum value (3.622) was registered in pasture, in autumn, and the maximum value (4.851) in the haplic luvisol cultivated with maize, in spring. In 2010 and 2011, based on the bacterial indicators of the soil quality values, on the first position is the cropland (4.750, 4.721) followed by orchards (4.615, 3.985) and pasture (4.537, 3.758).

  • Effect of the media on morphology of Cryphonectria parasitica (Murr.) Barr isolates and their Vegetative Compatibility Groups
    38-42
    Views:
    149

    The most dangerous pathogen for the European and American chestnuts is the blight fungus Cryphonectria parasitica (Murrill) Barr. Short after its introduction a big number of chestnut trees were destroyed on the infested area. The control could be really complicated, because of the numerous vegetative compatibility groups of the fungus. There is a type that carries a mycovirus viz. hypovirus in the cytoplasm. We are able to control effectively this pathogen by using mycovirus-carrying strains (called hypovirulent fungal strains also). In laboratory it is easy to multiply the virulent and the hypovirulent strains of the fungus but do not easy to differentiate colonies visually on simple PDA medium. During our research, we tested different types of media, based on potato and chestnut bark extract respectively. It was observed that on potato medium the virulent strains produce more orange pigments. So it is more easy to differentiate virulent or hypovirulent isolates of chestnut blight fungus based on colony colour and morphology.

  • Effect of sowing technology on the yield and harvest grain moisture content of maize (Zea mays L.) hybrids with different genotypes
    17-22
    Views:
    118

    From the aspect of the efficiency of maize production harvest grain moisture content shall be considered beside the amount of harvested grain yield. Hybrids with different genotypes and vegetation period length lose their moisture content different that is affected by row spacing and plant density – among agrotechnical production factors – depending on the given crop year. In the present research work three crop years with different weather conditions were studied (2013, 2014, and 2015). The small-plot field experiment was set up at the Látókép Field Research Centre of the University of Debrecen, Centre for Agricultural Sciences with four replications on a chernozem soil type. The effect of three factors was analysed in the experiment on yield amount and its moisture content. Factors were row spacing (45 and 76 cm), plant density (50, 70 and 90 thousand plants ha-1), while hybrids were of very early (Sarolta: FAO 290), early (DKC 4014: FAO 320, P 9175: FAO 330, P 9494: FAO 390) and medium (SY Afinity: FAO 470) ripening.

    In the crop year of 2013 the highest yield was produced – regarding the average of the hybrids – by the application of a row spacing of 45 cm (4.5%, 673 kg ha-1), however there was no significant difference between the yield of the populations of different row spacings. Significant difference (14.9%, 1751 kg ha-1; 6.3%, 583 kg ha-1) could be found in case of yield between different row spacing applications in 2014 and 2015. The effect of insufficiently distributed low amount of precipitation and lasting heat days in 2015 could be revealed in yield amounts and harvest grain yield moisture content results that were lower than in the previous years. In 2015 grain yield moisture content varied between 10.3 and 13.9% in case of a row spacing of 45 cm, while by 76 cm between 11.0 and 13.9%.

  • The roles of mycotoxins in cereal crops production: A comparative study of Hungary and Tanzania
    151-159
    Views:
    140

    Although Hungary and Tanzania's climatic, soil, and technological conditions differ significantly in crop production, cereals crop cultivation is of paramount importance; maize crop dominates the cultivated area (Hungary 1 million ha, Tanzania 3 million ha) both from a feed and food point of view. Unfortunately, in both countries, fungal species (Fusaria, Aspergilli, Penicillia, etc.) that produce various mycotoxins on cereals, including maize grains, are a growing concern. The situation is complicated because these fungal species and their toxins can appear not only on cereals but also on other crops. Despite the prevalence of mycotoxins in both countries, studies show higher exposure risks and contamination above tolerable levels for human consumption in Tanzania to Hungary, with Tanzania observing acute aflatoxicosis.

  • Effect and interaction of crop management factors and crop year on the yield of maize (Zea mays L.)
    31-41
    Views:
    186

    The aim of this study was to determine the combination of treatment levels of crop management factors which can optimize and sustain maize yield under varying climatic conditions. The effect of winter wheat forecrop, three tillage systems (Mouldboard-MT, Strip-ST, Ripper-RT), two planting densities (60,000 & 80,000 plants ha-1), three fertilizer levels (N0-control, N80, N160 kg ha-1) with four replications in irrigated and non-irrigated treatments were evaluated over a five year period, 2015–2019. The obtained results revealed that growing season rainfall positively correlated with yield, whereas, temperature negatively correlated with yield. Impact of adverse weather on yield was less severe in biculture, irrigated plots, at lower planting density (60,000), lower fertilizer rate (N80) and in RT and ST, compared to MT. In years with favorable rainfall, yields of MT and RT were significantly (P<0.05) higher than ST. However, in a less favorable year, such as 2015, with 299 mm growing season rainfall and the lowest July rainfall (59% below mean) there was no significant difference (P>0.05) in yield among the three tillage treatments. Higher planting density (80,000), and fertilization rate (N160) in tandem with MT are treatments combination conducive for high yield under favorable climatic conditions, whereas, in years with low rainfall and high temperatures, RT and ST offer alternative to MT for optimum yield with 60,000 plants ha-1 and N80 treatment level. Crop year effect accounted for 20.7% of yield variance, fertilization 35.8%, forecrop 12.8%, plant density 3.4%, tillage 1.2% and irrigation <1%. It is conclusive that with proper selection of the appropriate levels of agrotechnological inputs the adverse effect of weather on yield can be mitigated.

  • Comparative Study of Dutch and Hungarian Environmentally-friendly Apple Orchards on Potential Ascospore Dose of Apple Scab
    31-36
    Views:
    85

    In a 2-year study, Dutch and Hungarian environmentally-friendly apple orchards were compared as regards the amount of apple scab primary inoculum. The PAD (potential ascospore dose) method was used to quantify the potential amount of primary inoculum (ascospores) per m2 orchard floor. Applying this method, the number of lesions per m2 of leaf in the autumn (LD), the proportion of the orchard floor covered by leaf litter at bud break (LLD) and potential ascospore dose (PAD) were determined. In autumn, LD values ranged between 2.2 and 13.5 in the integrated orchards, while in the organic orchards the values were between 42.5 and 106.2, with especially high values in the Dutch organic orchard. LLD values ranged between 24 and 43% at bud break in both countries. PAD values were 10-60 times higher than those of the integrated orchards. The PAD values were between 673 and 4275 ascospore/m2 orchard floor in the integrated orchards, while in the organic orchards these values were 37102 and 52390 ascospore/m2 orchard floor, respectively. On the basis of the recorded primary inoculum quantity, the Dutch integrated apple orchard is considered to be excellently protected, while the Hungarian orchard has a medium level of protection. However, both countries’ organic orchards can be regarded overall as being very poorly protected. Accordingly, in the integrated orchards the predicted epidemic risk is low or medium, while in the organic orchards it is very high on the basis of PAD values.

  • The effect of different compost rates on the yield of ryegrass (Lolium perenne L.)
    95-98
    Views:
    116

    Protection of natural resources and sustainable natural resources management are essential for the long-term survival of humanity. This makes necessary nowadays the development of environmentally conscious living and spread of that in the future. The amount of organic waste materials, produced during human activities, could be decreased by composting instead of dispose them in landfills. Applying appropriate treatment technology and additives, the compost could be used as fertilizer for horticultural crops and it could increase the easily available nutrient content of soils. Compost utilization prevents nutrient deficiencies and by using the optimal rate, we could reach significant yield increases.

  • Social justice as a factor in socio-economic preconditions effective process of economic transformation Ukraine
    63-64
    Views:
    107

    The article deals with social justice as the main factor of social and economic prerequisites for effective transformation of the economy of Ukraine and basic ways of overcoming injustice in the social sphere of life.

  • Comparative study of a winter wheat variety and hybrid sown after different pre-crops on chernozem soil
    63-69
    Views:
    205

    Wheat production is a determining branch within Hungarian crop production (produced on nearly one million hectares). Weather anomalies caused by climatic change confirmed the importance of the biological background (variety, hybrid) in wheat production. The adapting ability and reaction of different wheat genotypes towards nutrient supply were studied in a long-term field experiment on chernozem soil type in the case of different pre-crops (sunflower and maize). According to the experimental results of the vegetation of 2017/2018, the yield of the variety Ingenio sown after the sunflower as previous crop ranged between 4168 and 8734 kg ha-1, while in the case of maize as previous crop, this value ranged between 2084 and 7782kg ha-1, depending on the applied nutrient supply level. The studied genotypes produced rather significant yield surplus as a response to the application of mineral fertilization (4.6–5.1 t ha-1 after sunflower and 5.7–6.3 t ha-1 after maize). Optimal mineral fertilizer dosage was determined by both the genotype and the pre-crop. N-optimum values of wheat genotypes was determined using regression analysis. In the case of the variety Ingenio sown after sunflower, the optimum range was N144-150+PK, while after maize, it was
    N123-150+PK, respectively. For the hybrid Hyland, these optimum ranges were N114-120+PK, just as N150-153+PK, resp. The application of optimal mineral fertilizer dosages improved water utilization of the studied wheat genotypes to a significant extent. WUE values of the control, unfertilized treatments ranged between 4.1–8.3 kg mm-1, while in optimal fertilizer treatment, it ranged between 15.5 and 17.4 kg mm-1.

  • Measuring methods of the efficiency of university technology transfer
    21-29
    Views:
    115

    Nowadays, the socio-economic role and function of universities as well as their relationship with the industry, are more than ever in the focus of both the political and the academic spheres. The importance of knowledge and technology transfer is increasingly stressed in various economic development plans and strategies. The increased interest is due to the fact that universities are located at the crossroads of education, research and innovation, which might be crucial for the country's economic competitiveness. The commercialization of university research results is a well-defined task of technology transfer offices. Measuring the efficiency and successfulness of such offices is a difficult, but not impossible task. The present article aims to analyze the existing literature on measuring the efficiency of technology transfer activities and to introduce the most commonly used measuring methods of effective technology transfer. The article attempts to answer the question how to measure the efficiency of technology transfer by reviewing the available international literature and by analyzing secondary data.

  • The effect of sulphur and nitrogen supply on the growth and nutrient content of spring wheat (Triticum aestivum L.)
    65-70
    Views:
    194
    Sulphur is an essential element for plants. Decreasing sulphur deposition from the air, and the use of more concentrated phosphate fertilizers, which contain no sulphur, has led to reports of sulphur deficiencies for wheat. Sulphur deficiency significantly affects yield and also the quality of wheat. The pot experiment was set up on calcareous chernozem soil at Látókép, Hungary, test plant was spring wheat (Triticum aestivum L). Seven treatments were used where nitrogen and sulphur were supplied as soil fertilizers in increasing rates (NS1, NS2, NS3) and in foliar fertilizer as well (NS1+fol., NS2+fol., NS3+fol.). Plant aboveground biomass production was determined in samples taken in the stages of development BBCH 29-30, 51-59, 61-69, 89. The nitrogen and sulphur content of straw and grain were measured. N/S ratios of grain and straw were calculated. The weights of grain were ranging between 8.6–16.1 g/pot. NS2 and NS2+fol. treatments produced the highest values. Foliar fertilizer had no further effect on grain. Analysing the values of the straw, it was observed that tendencies were similar to values of grain. The NS2 treatment produced the highest weight of straw and the NS3 rate already decreased that amount. The obtained results show the unfavourable effect of excessively high rate applied in NS3 treatment. The supplementary foliar fertilizer had no significant influence on the weight of straw. Both N and S-uptake of plant was very intensive at the stem elongation stage, then the N and S-content of plant continuously decreased in time in all treatments. The N-content of grain ranged between 2.215–2.838%.
    The N-content of grain slightly increased with increasing of nitrogen doses. In the higher doses (NS2, NS3) foliar fertilization slightly increased the nitrogen content of grain, although this effect was not statistically proved. The N-content of straw varied from 0.361 to 0.605%. The growing dose of soil fertilizer also considerably increased the nitrogen content of straw. Foliar fertilization further increased the nitrogen content of straw. The S-content of grain ranged between 0.174–0.266%. The lowest fertilizer dose (NS1) significantly increased the sulphur content of grain. The further increasing fertilizer doses (NS2, NS3) did not cause additional enhance in sulphur content of grain.
    The foliar fertilizer also did not change the sulphur value of plant. The increasing amount of soil fertilizer and the supplementary foliar fertilizer had no effect on the sulphur content of straw. The treatments influenced the N/S ratios of grain and straw. On the basis of experimental results it can be concluded that the examined nitrogen and sulphur containing soil fertilizer had positive effect on the growth and yield of spring wheat grown on the calcareous chernozem soil. The soil fertilizer application enhanced the grain nitrogen and sulphur content. The highest rate of fertilizer (600 kg ha-1) proved to have decreasing effect on the yield. The sulphur and nitrogen containing foliar fertilizer did not have significant effect on the yield parameters but slightly increased the nitrogen content of plant.
  • Evaluation of the correlation between SPAD readings and absolute chlorophyll content of maize under different nitrogen supply conditions
    121-126
    Views:
    328

    Currently, one of the most important objectives of agriculture is to maintain the principles of the sustainability. The use of precision technologies in agriculture belongs to this topic. The use of precision technologies is increasingly widespread in the cultivation of various agricultural crops, including maize. Sensing is an important part of these techniques. In our experiment we compared two methods: measuring relative chlorophyll content and the method of determine the extractable chlorophylls. The experimental plant was maize (Zea mays L.) and the measurements were performed at an early development stage (V8) of three genotypes. Three levels of nitrogen (0; 80; 160 kg ha-1) were applied during the experiment. The relative chlorophyll content was measured by SPAD-502 (Minolta, Japan) and a handheld GreenSeeker (Trimble, USA) device. The extractable total chlorophyll content decreased in parallel with the increased nitrogen level. The obtained SPAD values were diversified furthermore the NDVI values have not been changed for the effect of different nitrogen fertilization. In the early stages of development of maize, these parameters need to be complemented with other measurements to provide reliable information about the crops nitrogen status.

  • Comparison of Variability among Irradiated and Control Inbred Maize Lines via Morphological Descriptions and Some Quantitative Features
    70-73
    Views:
    60

    Knowledge of genetic diversity in breeding material is fundamental for hybrid selection programs and for germplasm preservation as well. Research has been done with nine irradiated (fast neutron) and four non-treated inbred lines. The aims of this study were (1) to investigate the degree of genetic variability detected with morphological description (based on CPVO TP/2/2) in these materials, (2) to compare the genetic changes among irradiated and non-irradiated maize inbred lines (based on some quantitative features). The irradiation did not change any of the characteristics clearly in positive or negative way, which can be related to the fact that the effect of induced mutation on genetic structure cannot be controlled. From the irradiated lines we have managed to select plants with earlier ripening times and better phenotypes. We could distinguish 3 main groups by the morphological features; these results match our expectations based on pedigree data. Markers distinguishable on the phenotypic level (e.g. antocyanin colouration, length of tassels) were significant in all lines.

  • Study regarding the influence of the nPK fertilizers use in long term trial on heavy metals concentration in wheat grains
    107-109
    Views:
    107

    The paper presents research results obtained in stationary experiments, carried out at Agricultural Research and Development Station Oradea, regarding the influence of nitrogen, phosphorus and potassium fertilizers, on Cd, Pb, Cu, Zn and Ni concentration on wheat grains.

    The minimum concentration of cadmium in wheat grains was recorded in the case of the unfertilized plot N0P0K0, 0.12 mg kg-1, and maximum value 0.22 mg kg-1, was registered at the fertilized plot with N160P80K120, relative difference relative to control was 84.2%.

    Lead concentration had the lowest value in the unfertilized plot, the value (0.4 mg kg-1) being under the maximum allowed (1.0 mg kg-1). In case of the fertilized plot with N160P80K120, the lead concentration had the highest value, 0.47 mg kg-1, but even in this case it was located beneath the maximum limit allowed.

    In all four systems of fertilization, copper has not exceeded the maximum allowed limit (5 mg kg-1), the values have been comprised between 1.68 mg kg-1 at the unfertilized plot and 2.81 mg kg-1 at the fertilized plot with N160P80K120. In other plots of fertilization copper had concentrations of 1.97 mg kg-1, at the fertilized plot with N80P40K40, and 2.78 at the fertilized plot with N80P80K80.

    The lowest concentration of zinc, 26.47 mg kg-1, has been registered in the control N0P0K0. In the other fertilization plots studied, the zinc concentrations had the following values: 27.66 mg kg-1 (N80P40K40), (N80P80K80) 29.87 mg kg-1 and 33.62 mg kg-1 (N160P80K120).

    Nickel has registered the lowest value in the unfertilized plot, 3.47 mg kg-1. The fertilized plot with N160P80K120 had the highest value 4.94 mg kg-1, with 42.39% higher compared to the control N0P0K0.

  • Volume of Paulownia Shan Tong (Paulownia fortunei × Paulownia tomentosa) plantation in Eastern Hungary: a case study
    43-46
    Views:
    123

    Volume tables for tree plantations are not unknown in international practice. In many places, this is due to the uniqueness of the species or variety composition of the plantations and the cultivation technology used. In most cases, this is also justified by specific soil (ecological) conditions. In Hungary, publications on Paulownia have not yet included a volume table. This is the first one we are publishing, thus it can be considered as a gap-filler. The research was conducted in Monostorpályi, a 1.8 hectare, 8-year-old municipal plantation. 8 trees were selected randomly and their parameters were studied.

  • Comparison of chemical parameters of enzyme active and inactive malt types
    161-166
    Views:
    199

    Nowadays there is an increasing emphasis on the use of raw materials. Typically, raw materials – in this study malt – are used in animal feeds and used in the brewing industry. However, in terms of quality (eg. high fibre content), these can be included in human nutrition, we have limited information on this possibility. The aim of our work was to compare different malt flours and examine the possibility of using malt in the baking industry. We were to investigate some of the most relevant parameters, such as dietary fibre content, crude protein content, fat content, carbohydrate content, dry matter content, moisture content, salt and energy content. In the future, we aim to conduct a research on some of these parameters with different malt types as the brewing industry uses novel ingredients different cereals, pseudocereals such as amaranth (Amaranthus spp.), oat (Avena sativa L.), quinoa (Chenopodium quinoa Willd.) in addition to the spring barley (Hordeum vulgare L.) or wheat (Triticum aestivum L.). Based on brewing studies, malt has a high fibre and protein content. Having these advantageous qualities, malt should be part of humans’ healthy diet. Using malt flour in the baking industry can be a new direction which can lead to creating a healthier lifestyle and healthier eating habits than suggested by the WHO (World Health Organization).

  • The impact of applying foliar fertilizers on the health condition of maize
    105-109
    Views:
    159

     

    The nutrient supply of plants is becoming more important in plant protection since the appropriate condition of plants can be ensured by optimal and satisfactory nutrient supply to avoid nutritional deficiency diseases. Due to the extreme weather conditions, plants are forced to face several stress factors, which leads to deterioration of the plant health. The increasing occurrence of droughts poses threat to nutrient uptake through the roots since all the nutrients can be accessible to the plants only if they are in dissolved form in the soil – which is not possible in the absence of water. Therefore, the importance of foliar fertilizer is becoming a more and more significant part of the nutrient supply, because with the help of this technology the development of any nutrient deficiency can be prevented.

    In this experiment, we focused on the efficiency of two different foliar fertilizers on maize.  Foliar fertilizers were applied two times, once in the stage with 8 leaves and tasseling phenophase of the maize. To verify the efficiency of the foliar fertilizers, the chlorophyll content of untreated and treated plant’s leaves was measured after each application. Moreover, the length and diameter of maize cobs, thousand kernel weight, protein, oil and starch content were also measured, and the results were compared to the untreated (control) ones. According to the results, in all aspects significant differences were observed and due to the laboratory analysis of leaves, in the case of magnesium and zinc supply the foliar fertilizers were able to prevent the development of nutrient deficiency.