Search

Published After
Published Before

Search Results

  • Construction Solutions for Reducing the Effect of the Rear-end Collision
    Views:
    140

    Analysing the accident statistics, we can detact that, the improvement of the transport safety is one of the most important engineering task. The number of the vehicles in the trasport gets significantly higher from year-to year, and the infrastructure of the cities frequently can not coordinate already it. Therefore the increasing of the vehicles’s number naturally involves the upgrowth of the accidents occasions too. The aim of the improvement of the vehicle-construction to reduce the personal injured and death resulted accidents number in contrast with the increasing traffic performance. This study analyses the construction options for reducing the effect of the rear-end collision whiches are concentrated for the passive vehicles and its passengers firtsly.  Among the actual car manufacturers applied solutions, foward-looking possibilities and suggestions are described in this publication. The development can not be concentrated for only the safety improvement, the mass-optimalization must be completed simultenously. These apparent contrary requirements can be completed with application of new materials. Therefore the study addresses the more optimal utilization of the meatl foam in the vehicles crushbox. In addition, an optimized break-assist solution is described based on the Mercedes developed Pre Safe Plus® system to increas the abrorbtion of the impact energy.

  • Latest Trends and New Tools Being Used in Strategic Management
    73-85
    Views:
    689

    In today’s rapidly changing world, there is an increased need for excellent strategic planning. A firm’s survival may indeed hinge on the firm’s planning process being exemplary. Various aspects of the strategic planning process are under review today as organizations wrestle to compete more effectively in an ever-changing world. This paper reveals and describes five new trends or tools being utilized today by firms to more effectively engage in strategic planning. Specifically, the new trends and tools to be discussed in this paper are as follows: increased need to follow a strategic planning model; increased need to develop quality vision and mission statements; a new improved method for incorporating SWOT analysis into practice. Utilizing two matrices one internal and one external to provide a less biased way to access the current strategy fit with conditions facing the firm. Explain the use of a decision matrix commonly called the QSPM (Quantitative Strategic Planning Matrix) for assessing the relative attractiveness of various strategies being considered for implementation. The purpose of this paper is to familiarize readers with basic new tools and techniques being used by organizations to effectively develop an improved strategic plan for the firm.

  • Investigation of the Eigenfrequency of the Bending Vibration of the Beam Clamped at Both Ends Around the Principle Directions of Inertia Based on a Single-Degree Freedom Model and a Finite Element Method Analysis
    69-79
    Views:
    175

    In this study, we have dealt with the calculation methods of the eigenfrequencies associated with the bending vibrations of rectangular-shaped beams clamped at both ends. Said eigenfrequencies were determined analytically in the single-degree of freedom model of the beam and the case of the three-dimensional solid and three-dimensional rod models by finite element modal vibration analysis. We presented the calculation method of the characteristics of the analytical model and then calculated the eigenfrequency for a concrete example. We have described the concept of modal characteristics, and in the following, we have determined its natural frequency based on the solid-beam and rod models of the former beam. We calculated and compared the solutions belonging to the models recorded in different ways in 11 additional cases of the presented methods.

  • Safety Index Based on Geometric Probability Is Proposed to Represent the Uncertainty of Soil Parameters for Spread Foundations
    43-52
    Views:
    106

    The overall factor of safety in geotechnics can be defined as the product of four partial factors of safety. One of these partial factors represents the uncertainty of the soil parameters. Based on geometric probability, a safety index is proposed to calculate the uncertainty of the soil parameters for spread foundations. Numerical examples have also been presented.

  • Practical Application of Methods in Strategy-Based Analyzes
    59-72
    Views:
    458

    Increasing environmental volatility is a growing challenge for companies and businesses. The speed of economic events is changing, and the risk of uncertainty is increasing, requiring business to take a new approach to strategic planning. In the design and forming of their strategy, both the factors of the external and internal environment and the analysis of their competitors can be based on well-chosen methods. We consider the review of these methods, their application in planning and educational practice. The aim of our work, in which we present the methods that underpin the strategy applied in both domestic and international practice. The analysis of the external environment illustrates the construction and applicability of an external factor analysis matrix based on traditional PEST analysis and the Porter's five-factor model. In the case of internal factor analysis matrix, we focus on the approach of method choice, and on the applicable methods, the importance of the resource-based approach, the analysis of key factors and the Porter value chain analysis matrix. The third pillar of the analysis that underpins the strategy is the matrix-based assessment of competitors. The applicability of the methods depends on the form of the enterprise, the field of activity and the nature of its activities, which is complicated by the emergence of new economic spheres (e.g.: sharing) and transformed power relations.

  • Gamification in the field of human resource, a creative solution for recruitment
    373-382
    Views:
    643

    With the introduction of latest tools and the expansion of technological solutions, the usage of smartphones ,with instant internet connection of course, has become an essential part of the net generation, also known as generation Z. At the same time, the role of IoT devices has also become part of our daily lives, completing and sometimes making it easier. This is due to the fact that the tools become more and more cheaper as time passes and parents and young people no longer consider these a technical innovations, but as a necessity. These generations; Y, Z and Alpha appear simultaneously on today's job market, which poses a serious challenge to future HR leaders and recruiters. Because of the generational gap between them, both motivational and demanding, novel solutions are becoming increasingly appreciated in this area as well. The purpose of this study is to demonstrate the potential of gamification and to highlight the its major areas, as well as to draw the attention to "good practices" in creative recruiting through better known examples. In addition, I also tried to point out the effect on the relationship between motivation and flow-experience. The gamification method is becoming more and more popular in our country, as it plays an increasingly important role in business and education as well. In recent years, with the use of serious games, there have been several examples of HR recruitment and selection, which clearly strives to reach out to younger generations.

  • Napenergia használata villamosáram termelésre egy családi házon vizsgálva
    1-12
    Views:
    128

    In this paper we compare the naturalgas and solarenergy utilizatio nwith the help of SWOT analisys. Than we are presenting the solarpower utilization devices and system installation in economic point of view. And two payback calculation method is demonstrated on a family house.

  • Experimental Study on the Effect of the Geometry of Punching Tool on Clinch Joints
    154-158
    Views:
    114

    In this study the effect of the punching tool’s geometry on aluminum alloy clinch joints is analyzed by experiments. Based on FE simulations the tip radius and the cone angle of the punching tool is changed, and their effect was analyzed by microscopic investigations and single lap tensile-shear tests.

  • Home 4.0 – Intelligent Houses
    53-57
    Views:
    200

    To understand “Home 4.0” you must know about the industrial revolutions, specially about the fourth one, which is often called “Industry 4.0”. The automatization process and the mapping of mechanisms and resources in the cyber-physical space are getting more and more popular in the households. From there comes the term in the title. Analysation of the currently used smart home technology was made and a model that simulates real life events with smart home criteria was created. The model is controlled by a central control unit, the front panel and program of which is also created. Important features such as lighting, heating, cooling and security system, fire protection, controlled consumer electronics, sprinklers and motors came true.

  • Sports Civic Organizations-Subsidies and the Subsidy Exposure
    341-347
    Views:
    137

    When we discuss the topic of civic organizations, especially sports profile civic organizations we need to note and comment that issue how these organizational forms are able and capable to accept subsidies. The related data of the Central Statistical Office (KSH) highlight the phenomenon that incomes of the classic civic organizations are mainly composed of state or private source donations. Although there is a really and pretty predictable subsidy system in the field of civic sphere currently, from one hand the distribution of the single subsidy forms considerably vary, on the other hand it result in the considerable amount of available financial resources. The fact whether subsidy forms and subsidy incomes have relationship with the addition alvariables of the organizational operation, such as subsidies provided, employment relationship, and expenditures may acquire special attention at the management of organizational operation together with the planned strategic interventions in the field of the civic sphere. 

  • Vállalkozói képzés a 21. században a felsőoktatásban – lehetőségek, módszerek, jó gyakorlatok
    1-18
    Views:
    472

    Challenges of the 21st century require answers from higher education as well. In Europe, most of the entrepreneurship programmes on the higher education institutions are less than ten years old. Whilst business studies may battle for academic legitimacy, it has a clear advantage when it comes to graduate employability. The aim of this paper is to give answer to the following questions: why entrepreneurship education is important, what are the methods which are already used and what are the results of them. The answers to the questions are based on literature reviews, a case study and in-depth interviews with alumni carried out at the University of Debrecen, where since 2010 Team Academy Debrecen, a new education model from Finland is implemented. Tiimiakatemia education is an innovative Finnish model founded in 1993 by Johannes Partanen that develops team entrepreneurs. Based on the results some of the important elements of entrepreneurship teachability are: learning by doing, passion, learning in teams, coaching and mentoring.

  • Examination of Student’s Motivation to Participate in E-Sport
    389-398
    Views:
    370

    The basis of our research is the popularization of e-sport and its significant development. Compared to many other sports, e-sport is not only a sports game, it is also a dynamically developing business in which the market success of its stakeholders depends to a large extent on its ability to recognize the needs of its stakeholders, sportsmen, the public and sports clubs. In our research we are looking for the answer to the question of students' attitude towards e-sports and what motivates them to spend more time with e-sports. Among other things, we have found that students are intrinsically motivated, besides getting their own pleasure, meeting themselves, it is very important to gain experience and to constantly develop themselves, to learn more new techniques and methods with the given e-sports game.

  • Laboratory Testing of Rediffusion of Contaminants Using DKS-Permeameter
    41-48
    Views:
    131

    Decades long hydrocarbon contaminations effecting heterogenous groundwater systems is a common problem both in Hungary and worldwide. Only the treatment of aquifer layers is possible with remediation technologies, so the contaminations remained in the aquitards are released back to the treated porous layer  after the treatment due to the changes in concentration-gradient. This process is the so-called back-diffusion: as a result, the previously removed contaminations appear in the remediated layer again. In order to get better understanding of the rediffusion process and the influencing parameters series of measurements were carried out at the University of Miskolc Faculty of Earth Science and Engineering using a special laboratory device called DKS-permeameter. With the help of some small modifications it can be used for the modeling of backdiffusion. Artificially contaminated soil samples were built in the DKS-permeameter from which contaminanant release occured due to back-diffusion. The concentration values were determined with spectrophotometric measurements.

  • Material Stock and Flow Analysis within the Agricultural Building Sector Based on Local Database
    297-320
    Views:
    123

    The purpose of the paper is to analyze on micro level the stream of building materials needed for raising cattle. The scope of the produced material flow chart will cover the inflow and storage of the materials. The overall objective of material flow analysis is to contribute to the data inventory development process which is needed to use these construction materials as secondary raw materials in the future. The assessment is based on a concrete new development in a Hungarian region being carried out nowadays as a development and modernization of an existing cattle raising farm. Driven by the concern of resource depletion, further research on higher level, based on larger database will be needed to verify the estimated national level results for the magnitude of growth of anthropogenic stocks.

  • The Relationship Between Sports Civic Organizations and Human Resources
    146-154
    Views:
    217

    Every spring the Hungarian Central Statistical Office records through its ELEKTRA database system the human and economic related operation data of the past year of civic organizations. This data source is usually considered as a standard at the evaluation of the domestic civic sphere. Still, the available handout titled “Most important features of the non-profit sector”, applying mainly descriptive statistics only provides a brief picture of specifications of the sector. Parallel with it, its background database is available yearly, which provides a unique possibility for a researcher to perform secondary analysis aiming to reveal deeper relationship. The objective of our study is purely to reveal a minor part of this considerable field, the relationship between subsidies and human resources mainly due to the fact, that human resource in this sector is composed of employees and volunteers, and it is questionable whether subsidies have an impact on employment.  Results revealed that there is a relationship between human resources and subsidies, where mainly private nature subsidies have a strong impact equally on voluntariness and work related employment

  • Examination of road sections in Debrecen by noise mapping
    287-295
    Views:
    82

    During the research, noise level calculations were performed for 13 numbered roads in and around Debrecen and a noise map analysis was conducted on the roads’ environment. The first examined year was 1995, the last was 2017. In the time interval, annual status was determined based on average daily traffic data. In addition to the road noise values calculated for each section, a noise map was prepared for each survey year. For the evaluation of the results a difference map of the highlighted periods was prepared. Typically, noise level increase from road sources was identified between 1995 and 2017 in a significant part of the studied area (southern and eastern parts of Debrecen and around the newly built roads). Stagnant noise level was diagnosed near the downtown of Debrecen and around the main road No. 4, furthermore in some places noise reduction was caused by the development of the road network (between Debrecen-Józsa and Hajdúböszörmény, between Debrecen and Látókép around road No, 33, and along roads No. 4808 and No. 4814) .

  • A bankvezetési kultúra változása a gazdasági válság hatására
    261-273
    Views:
    158

    A 2008/11-es globális gazdasági válság eredetét az elemzők jellemzően az amerikai másodrendű jelzálogpiaci válságra vezetik vissza. A gazdasági válság bizalmi válságba ment át, mely időben elhúzódást, hatásában pedig mélyülést jelentett. Összesített hatásként a pénzügyi szektor a valaha volt legmélyebb válságát élte át, melynek következményeként a tradicionális hatalmi viszonyok is megváltoztak. Hosszú idő után a bankok szabályozásáért és felügyeletéért felelős politikai vezetők globálisan vissza tudták venni a primátusi hatalmat a pénzügyi/gazdasági vezetőktől. A primátusi szerep elvesztése, a válság kitörésében játszott szerep, a társadalmi felelősség, a bankmentő akciók következményei, a reputáció csökkenése, a bizalomhiány mind közrejátszottak abban, hogy a bankvezetők és a banktulajdonosok új vezetési és gazdálkodási kihívásokkal találják magukat szemben. A tanulmány erre a nemzetközi és hazai kihíváshalmazra keresi a kulturális válaszokat.

  • Design an Opening Force Measuring Device for Balancing Clips
    220-225
    Views:
    118

    This paper deals with the development of a force measuring device to determine the opening force of different types of balancing clips. These elements can be used in the impellers of ventilators to rebalance the rotor. The measuring device contains a commercially available beam type load cell. The data processing is performed by Arduino Nano development platform with a 24-bit sigma delta A/D converter. The device is well applicable to determine the opening force of the clips in different opening distances.

  • Microbiological and Chemical Investigation of Drinking Water Samples on the Operational Area of Pannon Víz Zrt.
    151-160
    Views:
    210

    In our research the potable water quality was monitored between 1 January 2015 and 31 October 2017 in the operational area of Pannon-Víz Zrt. The connection between temperature, microbiological load and chemical parameters were investigated. After evaluating data, the following results have been identified. The seasonal changes of the microbiologically positive samples are determined by the contamination caused by Escherichia coli, Enterococci and Pseudomonas aeruginosa. The coliform group and the 22°C and 37°C colony-form units showed no seasonal dynamics. The analysed chemical parameters were below the limit during the examined period. Based on the correlation analysis, there is no correlation between chemical and microbiological parameters.

  • Mechanical Testing of 3D Metal Printed Stainless Steel Specimens
    7-13.
    Views:
    100

    Additive manufacturing (AM) is a cutting-edge production method, which has come a long way since its first introduction in the ’80s. Back in the days its usage was very limited to stereolithography, and was only able to make weak structures, so it only worked for visualization. Four decades later it is one of the leading research fields in production areas, because of its flexibility and its ability to make almost any complex geometry. However, no matter how powerful it is, it is not omnipotent, there are certain size and shape restrictions even this method must apply to.

  • Sportcivil szervezetek – számok a támogatások növekedése mögött
    126-134
    Views:
    155

    A KSH adatgyűjtési tevékenységének köszönhetően a nonprofit szervezetekre vonatkozó átfogó adatok mind adatbázis, mind tájékoztató formájában elérhetőek. A gazdasági adatok között feltűnik az az évről-évre hasonló nagyságú, domináns támogatási részesedés. Különös tekintettel a klasszikus civil szervezetekre ez egyértelműen jelzi azt, hogy a szféra támogatáskitett és támogatásfüggő. Ezek a szervezetek ugyanis kimondottan alkalmasak támogatások fogadására. Tanulmányunkban szeretnénk másodelemzés révén rávilágítani arra, hogy a sporttal foglalkozó civil szervezetek/sportcivil szervezetek száma milyen összefüggésben van a támogatásokkal, különös tekintettel két specifikus támogatási formára, a NEA-ra és a TAO-ra vonatkozóan. Az eredmények arra utalnak, hogy van összefüggés a támogatások összegének növekedése és a sportcivil szervezetek számbeli növekedése között, és ez kifejezetten igaz az egyik legrégebbi és legújabb támogatási forma esetében is.

  • Security and Risk management of Intelligent Integrated Institutes
    74-84
    Views:
    85

    The intelligent households are getting more and more popular beside the intelligent technologies. With all the advantages that this can provide, it brings the security risk of the information technology as well. We must deal with those dangers. We have to determine the risks so that we can make proper precautions. This article gives an effective guideline to achieve safety.

  • Examination of Z Generation’s Motivation and Expectations on Higher Education
    1-13
    Views:
    497

    Today’s students at secondary schools, the so-called Z generation will be the customers in higher education in the near future. Members of the generation 'Z' were born between the early 1990’s and at the end of the 2000’s and significantly differ from the previous generation Y. They are called as Sharing Generation and Digital Generation as well. They have special learning habits and special expectations about learning, teaching and theories. These facts bring up a question about suitability and efficiency of traditional and actual methods in higher education in connection with their teaching and personal development. In this research expectations of students in year 11 will be examined about the higher education in general and with special regard to the business higher education.

  • Application of Heutagogical Methods in Entrepreneurship Education
    364-373
    Views:
    128

    According to Kuit and Fell (2010) the educators’ task is to develop the learners’ lifelong learning skills to be able to apply their skills and competences in and efficient and creative way in new situations in a constantly changing environment. Kamenetz (2010) argues that neither the pedagogical nor the andragogical teaching methods are suitable for performing well in their job, but more and more a self-directed and self-determined approach is needed in which the learner reflects on what and how he learned, and the educator teaches the learner how to teach himself. The concept of heutagogy provides such principles and practices which can give an answer for the above-mentioned challenges in higher education. The authors examined how the heutagogical methods can be adapted at entrepreneurial courses and how the students evaluated these courses.

  • Industry 4.0 Concept and Key Elements
    100-111
    Views:
    235

    Growing and constantly changing international competition, increasing market volatility and demand for increasingly customised products (personalised manufacturing), and shorter product life cycles create significant challenges for companies that traditional production systems can no longer meet. Industry 4.0 is a new manufacturing paradigm focused on creating intelligent products and processes. The focus has been placed on achieving fully effective customised production under conditions suitable for mass production. Make-to-order replaces make-to-stock. Despite the growing interest in Industry 4.0, it is still not a consensual concept. There is no clear idea about this new manufacturing paradigm, so I attempt to present the available definitions of Industry 4.0 through the presentation of the scientific literature, declare the concept's technical elements, and present them in detail to get a clearer picture of the concept.

Database Logos