Search
Search Results
-
The Mechanical Properties of 3D Printed CuZn28 Brass Specimens with Different Orientations
253-259Views:217In this paper, the properties of CuZn28 brass raw material were presented. The 3D printed metal specimens are made from this material with different orientations. Their mechanical properties (tensile strength, yield strength) and elongation were investigated according to MSZ EN 6892-1: 2012 standard. The strength of the different printing directions is analyzed and it is determined which printing direction is the most favourable. Finally, the effect of the different printing directions upon the structure of the material is studied.
-
Creativity and Innovation to Improve Processes in a Textile Industry
80-96Views:142In this scientific work, the My Creative Idea (MIC) program was created and developed in the Coteminas S.A. textile industry, distributed among the organization's units in the country with emphasis on the São Gonçalo do Amarante unit in the state of Rio Grande do Norte. The aim was to critically analyze the improvements of industrial-scale processes resulting from the creativity and innovation intrinsically incorporated and experienced daily in the program. Thus, the general objective of the work was to evaluate the improvements in the productive processes coming from an innovation program in a textile industry, considering as specific propositions with respect to calculating the gains with reduction of losses, cost of implementation of ideas and measure financial returns and evaluate employee satisfaction according to the program. Moreover, there was free access in the company to be able to collect valuable information that could formalize a robust database for later structuring of the document, as well as the application of action research in the form of questionnaires. Therefore, the results verified clarified and emphasized the program's aggregating character to the organization in a general way under aspects that approach the financial spheres, the quality, and the satisfaction and motivation of the employees involved in this whole scenario. I suggest continuing to work on a continuous improvement methodology to further enhance My Creative Idea over the years, as well as insert this method of work to units that have not incorporated this program into their business strategies.
-
The use of Partial Least Squares to define the Characteristics in the Environment of Higher Education Institutions and their Effects on Entrepreneurial Academic Education, a case study: Torreon, Mexico
1-14.Views:81Because university incubators have a favorable effect on student’s entrepreneurial intents, Higher Education Institutions (HEIs) are essential to the delivery of entrepreneurship education. By analyzing the perceptions of students who received master diploma in management-business fields in Torreon, Mexico in 2021, the aim of the research is to identify the internal and external aspects of the HEI environment and their impact on entrepreneurial education using Partial Least Squares methodology with the help of the SmartPLS software, 156 responses from the statistical tool provided 120 responses. Three of the original hypotheses were confirmed, while four variables—two associated with HEI ecosystem external factors and two with entrepreneurial education elements—had to be removed since they were not accepted. The findings will lead to a better comprehension of the elements influencing master students' entrepreneurial perspective to create stronger relationship with elements of the HEI ecosystem.
-
Trends in Greenhouse Gas Emissions and Renewable Energy Policies in the EU and USA, with Special Emphasis on the Transportation Sector
219-231Views:248The aim of this work is to review recent trends in the field of greenhouse gas (GHG) emissions and renewable energy policies of the European Union and the United States of America. During the last few decades, there was a significant shift within the political attitude towards these fields, therefore important changes were realized in the electricity production and the climate policy. In the present paper, we discuss the current situation focusing on the transportation segment.
-
Operational Feasibility Assessment of Geothermal Heat Harnessing Systems
46-53Views:148Renewable energy sources are now essential to establish sustainable development. This paper examines one kind of source the geothermal energy. For geothermal energy when combined with a heat pump COP can be used for evaluation. For solely geothermal sources different approach is needed thus in the paper, a new geothermal heat production coefficient is used to examine the operational feasibility. For the assessment, many hypothetical buildings were created to model their heat demands. Two types of calculation methods are used for heat demand calculation. Based on the results, the maximum depth of a geothermal borehole and economically critical qualitative coefficient was concluded.
-
Changes in the Financial Condition of Families in Hungary between 2000 and 2019
712-722Views:237The financial condition of families living on wages is function of many factors. It is determined, among other things, by the development of wages, social benefits, tax rates and the amount of allowances that can be granted. The part of the tax system that affects the largest segment of individuals changes every year, and even during the year, reducing predictability. In recent years, discussions over the taxes have shown that the rate of personal income tax cannot be evaluated separately from the social security contribution rate. Gross average earnings - on the grounds of raising the minimum wage and the guaranteed minimum wage - have more than four-times in nearly 20 years. However the rate of growth is higher in the average net earnings due to changes in the tax system. Compulsory determined wages increased to almost six-times over the years under investigated. But in 20 years, how much has the income situation of an average family living on a salary become more favourable or more unfavourable? In our study we are looking for an answer to how the increase in the minimum wage and the changes in the law how to have affected the livelihood.
-
Effects of TIG Reheating on Duplex Stainless Steel Weld Microstructure
295-302Views:141Duplex stainless steels (DSS) gaining their excellent mechanical properties and corrosion resistance due to their austenitic-ferritic microstructure, ideally in the same amount. However, to keep this ideal phase ratio during arc welding is very difficult. Generally, the arc welding processes will result in more ferritic microstructure in the weld metal and in the heat affected zone, due to the rapid cooling. The ferritic microstructure can cause chromiumnitride precipitation, because the nitrogen solubility in ferrite phase is very low below 700 °C. These chromiumnitride precipitations can cause loss of corrosion resistance and mechanical properties. However, during subsequent reheating, the chromium-nitrides can dissolve and act as a secondary austenite nucleation site in the ferritic microstructure. In our research we welded DSS specimen autogenously, with tungsten inert gas welding using pure argon and 94 % argon + 6 % nitrogen as shielding gasses. In the first case the sub-sequent solid-state reheating caused 20 % increase in the austenite fraction of the weld metal but with the use of mixed shielding gas only 5 % increase.
-
Use Design or Technology: The Antique Römer Glass
33-37Views:113In this paper, the Römer-glass are assessed as indicator of the technology and design by using a comparative method. We identifed their designing technology methods and associated them with manufacturing centres. All of them made from green forest glass and produced in northwestern and central Europe from around 1000-1700 AD. The Römer glass present dining traditions and habits in the middle ages, furthermore like a personal belongings can be associated with the presentation of social status or individual expression.
-
Entrepreneur Willingness in Case of Students of University of Debrecen
181-194Views:193This article is about the entrepeneur willingness in case of the students of University of Debrecen. There was 500 participants in the paper and online based survey who could tell their opinion about entrepreneurship in Hungary, what difficulties are they seeing and which part of the economy is where they see opportunity to start their own business. The aim of this article is to get to know how many of them and with what rate would like to start their own business, while it is examined they are from which faculty of the University, what is their family background and these facts how effects on the individual if his or her family owns some kind of business.
-
Relationship between the Lean and Agricultural Companies
370-381Views:172Eliminating losses is a daily challenge for both: companies and individuals in society. Whether through the production or office work, we are wasting the most important human needs: time and energy with useless things and processes. Both are an integral part of our daily lives and are particularly important for agricultural companies. In our study, we look at the relationship between Lean and agricultural companies. We outline the risks associated with these seven Lean Losses at these companies, and how these problems can be corrected and eliminated using current methods. Our research sheds light on how technological innovations affect and influence the position of companies in the market and in financial and human resources. We examine the benefits and drawbacks of the innovations applied and the Lean processes used, and how they affect the environment around them.
-
Analysis of Differences Between Levelling Networks in the County of Hajdú-Bihar
84-92Views:45The height determination of control and detail points is essential during the process of planning and manufacturing in the practice of civil engineering. Planning maps are drawn for the former, while the intended plan is set out on the ground during manufacturing, and after the manufacturing the completed installation is mapped. Using the same reference system in all three steps, both horizontally and vertically, is recommended even though in some cases it is unavoidable to change from one reference level to another. Regardless of the fact that both refer to the mean sea level of the Baltic Sea, this can create difficulties, since the difference between the EOMA and Bendefy networks used in Hungary shows varying values depending on the geographical location. The aim of the analysis is to determine a constant difference regarding the analysed settlements based on the common points of the networks.
-
Investigation of the Eigenfrequency of the Bending Vibration of the Beam Clamped at Both Ends Around the Principle Directions of Inertia Based on a Single-Degree Freedom Model and a Finite Element Method Analysis
69-79Views:175In this study, we have dealt with the calculation methods of the eigenfrequencies associated with the bending vibrations of rectangular-shaped beams clamped at both ends. Said eigenfrequencies were determined analytically in the single-degree of freedom model of the beam and the case of the three-dimensional solid and three-dimensional rod models by finite element modal vibration analysis. We presented the calculation method of the characteristics of the analytical model and then calculated the eigenfrequency for a concrete example. We have described the concept of modal characteristics, and in the following, we have determined its natural frequency based on the solid-beam and rod models of the former beam. We calculated and compared the solutions belonging to the models recorded in different ways in 11 additional cases of the presented methods.
-
Calculations of Performance Losses for Automobile Vehicles
210-218Views:207Vehicle-energetic-models are used to analyze the performances and when a comprehensive structure is established even optimization could be done. For these kinds of models, the losses of the vehicles have to be known. These losses could significantly effect of the vehicle fuel consumption. From these losses the rolling resistance, drive elements and aerodynamic drag are discussed. This paper reviews some of the literatures that describes the calculation methods and gives us some idea about the degree of their value. Our further goals are to have an UpToDate loss coefficient dataset and calculation methods for further vehicle-energetic modelling.
-
A study of pressure-sinkage relationship used in a tyre-terrain interaction
186-199Views:155The vehicle applies a normal load to the terrain, which causes sinkage and motion resistance. To forecast the normal pressure distribution on the interface of a vehicle–terrain and the tractive performance of a vehicle, the response of the terrain to normal load (which is characterized by pressure–sinkage relationship equations) must be measured. This paper presents the common conventional pressure sinkage models used in terramechanic and the modification that happened to this models. In addition the features of the new models.
-
Measuring the Dynamic Characteristics of Electric Motors
359-364Views:105In our previous publications [1, 2], we described our vehicle dynamics simulation program which was developed in MATLAB environment. We also discussed its use for optimizing the technical parameters of electric driven vehicles. We detailed the model and simulation of the series wound DC motor which is part of the program. Besides, we described the experimental procedure by which we can determine the electromagnetic characteristics of the motor from the input parameters of the simulation program. In the present publication we deal with the determination of the dynamic characteristics of the motor (the moment of inertia of the rotor, bearing and brush resistance torques) experimentally. Knowing the above mentioned electromagnetic and dynamic characteristics, we can carry out the simulation of the motor and the results of the simulation can be compared to the results of the test measurements.
-
Surface Activation of High Impact Polystyrene Substrate Using Dynamic Atmospheric Pressure Plasma
80-87Views:136Over the last decade, the number of researches has increased in the field of bonding technologies. Researchers attempt to improve surface adhesion properties by surface treatments. Adhesive bonding is one of these bonding techniques, where it is important to see what surfaces will be bonded. One such surface property is wetting, which can be improved by several types of surface treatment. In recent years, atmospheric pressure plasmas have appeared, with which research is ongoing on surface treatments. In our research, we will deal with the effects of plasma surface treatment at atmospheric pressure and its measurement. In addition, we summarize the theoretical background of adhesion, surface tension and surface treatment with atmospheric pressure plasma. Our goal is to improve adhesion properties and thus the adhesion quality.
-
Knowledge of Control Methods and their Application in the Practice of Small and Medium Enterprises in the Northern Great Plain Region
441-452Views:364Like large companies, the small, and medium-sized businesses need also all the information to ensure the efficiency and effectiveness of their business by making sound management decisions. Compared to large companies, SMEs have significant development potential, which can be created in part by the companies themselves, possibly through the introduction of new-modern management - business administration methods or economic policy measures (= targeted and efficient support system), which, by stimulating R & D & I processes, serves to increase competitiveness and contribute more and proportionally to domestic GDP and exports. The analysis presented in the study covers the controlling knowledge of the leading SMEs of the Northern Great Plain Region, the conscious or unconscious application of controlling tools, the assessment of succession, customer and supplier valuation and certain areas of managerial accounting. Overall, it can be concluded from the small sample size that the use of controlling tools is proportional to the size of the business, but nevertheless, many mid-size business executives do not require the collection and analysis of insider information that could explicitly help decision making for example through advanced costing procedures.
-
Casting Issues of Thick-Walled High Pressure Die Castings
159-166Views:143Die casting is a manufacturing process for producing accurately dimensioned, sharply defined, smooth or textured surface metal parts. It is accomplished by injecting liquid metal at fast velocity and under high pressure into reusable steel dies. Compared to other casting processes, die casting is at the top end of both velocity and pressure. The high velocity translates into a very turbulent flow condition. The process is often described as the shortest distance between raw material and the finished product.
Pre-fill is a process technique that is the result of significantly delaying the start of fast shot beyond the “metal at the gate” position. It can be stated as a percentage of cavity fill or as a distance beyond metal at the gate.
-
Designing of Lab-scale Anaerobic Digester Equipped with Maxblend Impeller to Evaluate Effect of Mixing on Anaerobic Digestion
404-413Views:141Operational parameters can be easily controlled at lab scale experiments for an anaerobic digestion process. Our aim is to design a lab-scale digester equipped with an impeller to investigate how the geometry of impeller and different mixing modes effect the biogas yield of digester. Further, the methods of measuring the gas volume, gas composition, mixing intensity, torque, temperature are discussed in this article. The assembling of 4 liters digester is described which can be operated at various operating parameters which control the anaerobic digestion process. Mixing is very important to enhance efficiency of an anaerobic digester. To attain mixing Maxblend impeller is used in this lab-scale digester due to its better performance for mixing and power consumption. Various design consideration has been described.
-
Specialties of First SMED in Pharmaceutical Manufacturing
1-11Views:194Single Minute Exchange of Die (SMED) is considered as an effective lean management method increasingly used in pharmaceutical manufacturing. By reducing change-over times and costs, the successful implementation of the first SMEDs may bring a significant increase in terms of manufacturing flexibility. The purpose of this study is present the special factors that fundamentally determine SMEDs applied especially in the process of pharmaceutical manufacturing. By focusing on a well defined part of the pharmaceutical manufacturing process, lasting from Weighing and Measuring to the end of Tablet Pressing, the study also aims to highlight the benefits of SMED itself. The findings of the research are based on the practical experiences of four SMEDs implemented in various sections of production. According to the experiences and considering industrial specialties, the implementation of SMED has to harmonise with the requirements of Good Manufacturing Practices (GMP) which are representing the golden quality standards of pharmaceutical manufacturing.
-
Examination of preferences for pork meat and pork meat products among university students
131-141Views:176The purpose of this study was to examine the preferences for pork meat and pork meat products. The used sample (N=324) for the analysis came from the students of the University of Debrecen Faculty of Economics and Business. The survey was conducted by the form of online questionnaire. The results from data analyzes were based on descriptive statistics, cross-table and correlation analysis, Mann-Whitney and Kruskal-Wallis tests. Based on the results we can concluded that majority of consumers in the sample would be willing to pay more for hungarian and healthier products with less than 50%. Furthermore we can say that have a significant difference between men and women according all factors which used in analysis; have a significant difference between people with secondary and higher education according to perception of manufacturer/brand; have a significant difference between income level groups according to price and healthy eating.
-
Longitudinal Dynamic Simulation Possibilities of Vehicles Using AVL Cruise M
743-748Views:231For creating vehicle dynamic simulations, in most cases, an appropriate software is required to help the dynamic model design. For this purpose several kinds of software are available in the market with different properties and user interfaces. In this article a leading simulation software of the market, AVL Cruise M, is shortly presented.
-
Overview of the Appearance of Management Information Systems In Hungarian Higher Education through the Example of the University of Debrecen
60-68Views:138In recent years, the ever-decreasing number of students in Hungarian higher education has created a serious competition between institutions, in which not only national but also foreign universities prove to be competitive. In order for national institutions to be able to compete adequately in this competition, managers need to be provided with well-structured, up-to-date information that can support decision-making. The management information system, which successfully adapted at the University of Debrecen, has been in operation for years and provides significant support in data reporting and ad hoc reporting, but there are still many opportunities for advancement. The study draws attention to the importance of management information systems through the example of the University of Debrecen.
-
Survey of the Application Fields and Modeling Methods of Automotive Vehicle Dynamics Models
196-209Views:201In this paper, a review is presented on automotive vehicle dynamics modeling. Applied vehicle dynamics models from various application fields are analyzed and classified in the first section. Vehicle dynamics models may be simplified because of different reasons: several control/estimation/analysis methods are suitable only for simplified models (e.g. using control-oriented models), or because of the computational cost. Detailed/truth models of vehicle dynamics represent another field of vehicle dynamics modeling, these models play an important role in the virtual prototyping of vehicles. In the second section, the main modeling considerations of vehicle dynamics are presented in longitudinal, lateral and vertical directions. Various physical effects must be considered in the case of vehicle dynamics modeling, a lot of these effects are significant only in a specific direction of the vehicle body, which is the main potential of model simplification. The section presents vehicle modeling considerations in all of the three translational directions of the vehicle body.
-
The Effect of MMS Lubrication on Surface Roughness During Machining
452-457Views:80I display this paper the chipping front metal of cutting allocated geometric, considering particular the friction. I catch the attention energy's balance sheet someday metal of cutting, open one new direction the manufacture technology. I display this new direction's metal of cutting condition. but built I delineate his paper final division this new policy searching programme, consumed trial instruments as well as the evaluation's mode.
