Search
Search Results
-
The Impact of Electrical Vehicles on Sustainability: Jordan as a Case Study
393-403Views:217The Global concern is moving toward making a revolution in favor of exploitation of renewable energy in order to improve environment conditions, limit emissions and minimizes consumption of non-renewable resources within the planet. In this context, it is necessary to focus on the transport sector as it contributes of at least 30% of the total primary energy consumption. Therefore, a set of rules must be developed to maintain economic, environmental and social sustainability to address the problems so as not to increase their severity and these cannot be done unless there are joint measures and regulations from governments, companies, manufacturers and users. Unfortunately, the Jordanian transport system mostly depend on the individual transport which supported by cars, and that because of the weak role played by the public transport sector, especially at the capital, Amman. Buying hybrid cars (internal combustion engine + electric motor) and Electrical Vehicles (EV), in the past few years in Jordan is increasing, which is compatible with the global trend to use Electrical Vehicles (EV) instead of Internal Combustion Engine vehicles (ICE) powered by fossil fuels, this issue will have a direct and indirect impact on gas stations companies, also it will have direct impact on labor sector and the current car industry since electric charging stations as well as EV manufacturing is not labor intensive. The main purpose of the study is to show how much it is necessary now to start theoretical assumptions through studying the expected annual increase in passenger cars and its impact on sustainability and predicting the future fuel consumption and emissions and compare them with the base situation.
-
Analysis of the Operation of a Vocational Training Institution in the Light of the Models of Educational Management
51-68Views:137The operational characteristics of educational institutions are substantially influenced by educational policy choices. In July 2015 the establishment of Centers of Vocational Training marked the start of a new chapter in the management of school-based vocational education and training under a new organisational structure. As part of the Centers of Vocational Training, Vocational Trainging Institutions have become member institutions with legal personality . The introduction of centralised management has significantly changed the framework and the way in which institutions, as educational organisations operate, which has had an impact on management and governance processes and thus on the functioning of the whole organisation. According to the different management and governance processes applied in practice in educational institutions, educational institutions can be classified into different models of educational management, whose literature theory we call upon to examine the functioning of a vocational training institution. The aim of our study is to examine the functioning of a Vocational Training Institution in the light of the models of educational management. We will examine the operation of a Vocational Training Institution in the case of a Vocational Training Centre and its member institution operating in Szabolcs-Szatmár-Bereg County. Our study is based on the method of document analysis. In the course of the analysis, the documents of the examined institutions were analysed according to certain characteristics of the key dimensions of the educational management models defined in the literature. The results of the analysis provide an overall picture of the type and nature of the management of the vocational training institution examined.
-
Sport Consumption, Fan Engagement, Sport Statistics – Post-specific Passing Characteristics in Football
Views:657Digitalization and the explosive development of technology have led to significant changes in football. Due to the increasing amount of data available through various sensors and other data collections, we can observe the rise of data-centric, analytical and statistically oriented thinking in football, which is also of interest to fans. Digitalisation is also closely linked to sports consumption, which is why we have seen significant changes in this area in recent years. The pandemic has further amplified the speed of digital transformation in the sports industry. One of the most important contents for sports organizations and their fans is the in-depth sports statistics and analysis that enhances the consumer experience. In our study, we examined the most common performance indicator in football, passing. Our goal was to examine the position-specific pass characteristics in detail, therefore we also examined different pass properties in our research. As a model for our analysis, I chose the premier league, which has the highest UEFA coefficient. The three rounds (rounds 30-32) of the championship season 2019/2020 have been recorded and analyzed in terms of passes. there was a significant difference between the average number of passes per game between defensive and offensive players (t=7,988, p<0.05). There is also a gradual decrease in the number of passes attempted per match and the accuracy of the pass in the examination of the middle positions when examining the positions in the depth of the pitch. For both pass accuracy and average pass count, the decreasing ranking corresponds to the position of positions on the pitch (order: 1, central defender 2, defensive midfielder 3, inside midfielder 4, attacking midfielder 5, striker). In the value indicator of the position for passes, offensive positions performed more effectively than defensive positions. The extreme positions also stand out among the attacking positions, where in the case of the position value per pass number, 23.3% of the total test was completed and 14% of the amount of the established position value indicators was provided by these posts. Overall, our study points to post-specific pass characteristics and, knowing this, we can state that the comparison of players' passing performance is relevant if the players are in the same or related positions.
-
Six Sigma in preconstruction: case study on improving of reinforcement steel processing
49-60Views:129Lean process improvements are crucial for enhancing production efficiency. In my research, I examine the application of the DMAIC methodology to develop the MEP facility within the framework of lean Six Sigma. Highlighting the challenges of precast concrete production, my study details how lean management aids in efficient process design and measurement. Introducing lean Six Sigma methodology involves standardizing processes and ensuring their effective development, contributing to the facility's efficiency
-
Examining the Competitiveness of Fish Products on the Market
151-163Views:99Fish and fishery products are one of the key ingredients in human nutrition and are therefore outstanding in terms of both production and trade. Different processed fish products are available in many countries around the world due to globalization and a fast supply chain. In our study, we examined the market for fish and fishery products using secondary data collection. The data were collected several years ago from the databases of FAO, EUROSTAT, COMTRADE and KSH The comparative advantages or disadvantages of international trade were determined with the help of the RCA index for the role of Hungary and the EU in the world in the case of different categories of fish products. The aim of our research is to compare the fish products of different processing in Hungary and in the EU compared to the international situation, paying special attention to the main exporting and importing countries. Based on the secondary research the study has a detailed the specificities of trade, the trends observed in recent years and the competitiveness of fish products in Hungary and the Member States of the European Union and effect relationships behind the RCA-index results.
-
Development of a Family Business in a Franchise System
390-400Views:313The purpose of this study was to examine that franchise as a form of enterprise in perspective to existing family businesses how can they operate this way. Why is this form better for them, what advantages it has? In this case an ice cream shop’s economic inidicators was examined which one is owned by a hungarian family in JászNagykun-Szolnok county who runs several shops like this. That is why this study made, to find out is that possible to run it sucsessfully and what costs does the newcomers in the franchise business network have to pay and how much is the time on the return of investments.
-
Performance Management Innovation is a Medium-Sized Enterprises of Light Industry/
1-9Views:232To achieve the strategic objectives of the management of a company, has to monitor and coordinate continuously the tasks of the employees, they have to do to reach the targets. In this action, sometimes the management of the company has to make corrections in the work and motivations of the employees. This article presents a case study carried out on a medium-sized companies working on the light industry field. It presents a new motivation system for the employees to increase up those products, for those who are at the bottom of the producing rankings of the company, moreover to develop their performance to reach the average level. Here has to be mentioned that, the employees at the bottom of the performance rankings producing under the average levelobligates totally the same amount of circulating and standing capita of the company, lead to the intervention of the management. The norm based requirements within the framework of the production system were completed to provide the more efficient working of the employees, besides strengthen their skills and their loyalties to their colleagues. As a result of the innovation of the performance management the product of the employees standing at he bottom of the rankings increased up considerably. It has manifested formerly in the decrease of the pointing error fixed to the personal monthly norm, moreover it showed the catching up of the employees standing at the bottom of the ranking to the middle. The case that the employees at the bottom get closer to the others in the middle of the ranking helped to contribute to achieve the strategic objectives of the management through reducing the average cost of the producing, since increasing the budget of the producing activities.
-
Examining Organisational Culture with OCAI among Technical Management BSc Students of the University of Debrecen
1-8Views:347Based on the OCAI model, our study analyses and compares two things (1) the corporate culture of the University of Debrecen Faculty of Engineering as it is perceived by its engineering management students; and (2) the culture they think would be ideal. According to the respondents the existing culture is closer to the clan type and further from the market type compared to the average. Their ideal culture is closer to the clan, adhocracy and further from the market (compared to the average). The perceived current and the ideal culture are significantly different only in the adhocracy type. From the 20 items of the OCAI questionnaire 7 were significantly different from the average in the case of the perceived culture and 13 in the case of the ideal culture. Differences between ideal and present cultures are statistically supported only in the following dimensions: dominant characteristics (clan is currently stronger, adhocracy is weaker), corporate leadership (market is currently stronger), strategic emphasis (hierarchy is currently stronger).
-
Experiences of Innovation Projects in the Light of the „European Paradox”
563-578Views:116Corporate innovation can be a major factor in economic development and long-term high-level corporate performance. The position of the EU in international innovation rankings has not improved since the 2000 2009 period; though there has been a more positive trend since 2010, meeting the Lisbon goals, the EU is still not at the forefront in terms of R&D&I. Behind this process is the rapid progress of some industrially developing nations in R&D&I, as well as the relatively slow institutional development of national innovation systems in Europe. The relative lag in Europe can be explained by the frequently referred to “European paradox”, which is still unclear for methodological reasons. Firstly we consider the international ranking in innovation, then discuss one of the explanations put forth to explain this rather weak performance. We present case study that represent Hungarian experiences with corporate innovation.
-
Role of Biomass in Urban Energy Management
62-76Views:148When making decisions on the use of energy, both on building and on city level, biomass plays certainly a role in looking for sustainable solutions. This study starts with highlighting some key points regarding urban energy management, including world urbanization trends, heat island effect of big cities and energy hierarchy in energy management. With these in mind, it is worth considering, how the shading effect of surrounding biomass can mitigate the heating needs as a wind barrier in the winter or decrease the cooling load as shadowing element in the summer, both for buildings and whole cities. These can be further enhanced by biomass integrated in the buildings’ envelope: green roofs and green walls can have significant energy conservation effects, according the characteristics of their different types. Lastly, urban disposal of biomass can lead to renewable energy generation, both in case of biogas production and waste incineration. These shading, covering and fuel possibilities all underline the importance of biomass in urban energy management.
-
How Does Public Debt Change when the Next Crisis Comes - and It Will Come!/the Expected Evolution of Greece's State Debt in the Next Crisis Period/
91-104Views:241It has recently been announced that Greece may withdraw from the Euro-Zone permanent rescue fund's aid program because it has successfully met the conditions imposed on it. Creditors and credit qualifiers also agreed that the Greek economy was on a good growth path. That is why there is a chance that by 2030 the current sovereign gross debt of 182.7 per cent of GDP will fall to 123.3 per cent. The author finds this statement unfoundedly optimistic. He argues that the Greek debt ratio – despite the current optimum economic fundamentals – does not seem to be sustainable. He sees greater probability that in the near future it will again be necessary to release some of the Greek debt. Debt reduction will also mean a new orderly state bankruptcy. The study seeks to highlight how vulnerable and risked the sustainability of current Greek debt financing. Using a macroeconomic model, it shows and justifies how the Greek sovereign debt changes in the case of a crisis that is only half the extent of the previous subprime crisis. If this happens, by 2023, the state debt will rise to more than double the national product, and by 2030 only to the present, otherwise critical, level. It follows that the high risk of financing Greek state debt remains unchanged.
-
Vállalkozói képzés a 21. században a felsőoktatásban – lehetőségek, módszerek, jó gyakorlatok
1-18Views:495Challenges of the 21st century require answers from higher education as well. In Europe, most of the entrepreneurship programmes on the higher education institutions are less than ten years old. Whilst business studies may battle for academic legitimacy, it has a clear advantage when it comes to graduate employability. The aim of this paper is to give answer to the following questions: why entrepreneurship education is important, what are the methods which are already used and what are the results of them. The answers to the questions are based on literature reviews, a case study and in-depth interviews with alumni carried out at the University of Debrecen, where since 2010 Team Academy Debrecen, a new education model from Finland is implemented. Tiimiakatemia education is an innovative Finnish model founded in 1993 by Johannes Partanen that develops team entrepreneurs. Based on the results some of the important elements of entrepreneurship teachability are: learning by doing, passion, learning in teams, coaching and mentoring.
-
Investigation of the Eigenfrequency of the Bending Vibration of the Beam Clamped at Both Ends Around the Principle Directions of Inertia Based on a Single-Degree Freedom Model and a Finite Element Method Analysis
69-79Views:215In this study, we have dealt with the calculation methods of the eigenfrequencies associated with the bending vibrations of rectangular-shaped beams clamped at both ends. Said eigenfrequencies were determined analytically in the single-degree of freedom model of the beam and the case of the three-dimensional solid and three-dimensional rod models by finite element modal vibration analysis. We presented the calculation method of the characteristics of the analytical model and then calculated the eigenfrequency for a concrete example. We have described the concept of modal characteristics, and in the following, we have determined its natural frequency based on the solid-beam and rod models of the former beam. We calculated and compared the solutions belonging to the models recorded in different ways in 11 additional cases of the presented methods.
-
Analysis and Comparison of Forecast Methods for a Small Enterprise
14-21Views:379The application of forecasting models is an essential part of the profitable operations of every company. However, today’s small and medium sized enterprises (SMEs) does not pay enough attention to this field. This research presents a case study in which we tried to determine the sequence of a forecasting process, furthermore, determine the best applicable method to the dataset. Seven dissimilar forecasting method was applied: moving average and weighted moving averages with different periods (2-3-4 weeks), as well as exponential smoothing. The four-week-long weighted moving average served the best solution, which was tested by tracking signal as well.
-
Battery Measurement Methods and Artificial Intelligence Applied in Energy Management Systems
428-436Views:154Diagnostics of batteries using advanced methods have gained remarkable roles in the past few years. This study focuses on the type of measurements, tests and methods to reveal and classify them. During manufacturing and operation several faults could emerge in batteries including non-optimal operation conditions, operators without experience, and finally, random changes in batteries under physical and nonphysical conditions. Improper handling of batteries and battery cells man cause operation failures or, in the worst case, accidents. To reveal these problems several methods are applied in industry and in scientific laboratories. For a comprehensive analysis of battery management, artificial intelligence and Industry 4.0 methods can be used very effectively. Big Data analysis in its standard form is not a new achievement, but other mathematical tools could be applied to control monitoring such as Fuzzy Logic or Support Vector Machine (SVM). They are efficient tools to analyse the deviation of batteries condition because it can detect sudden changes, parameter deviations and anomalies, and the user’s behaviour and habits. This article gives a description about the most important battery testing methods and the connection between Big Data and Operation Management with Artificial Intelligent (AI) methods.
-
Adapting Open Innovation Model in Supplier Qualification Programs
155-167Views:348The development of innovative models fundamentally contribute to the changing the way of thinking in business context. Today, in this process, the impact of open innovation model is a kind of paradigm shift. The contents of this change has been mostly clear in the field of context of product-, innovation and technology, but not onm the field of organizational and management innovations. In this study, we sought to answer that in the case of knowledge transfer’s special field –the programs of suppliers - how to apply the principles of open innovation and how this may have positive effects. The motivation behind, was to look for commonly used models for the SME sector, that is fundamentally linked to large enterprises as suppliers, characterized by increasingly rapid technological development ecosystem to collaborate.
-
Do Changes in the Economic Role of States through Privatization matter?: The Brazilian Case
125-136Views:186In market economies, the subject of scientific research is the extent to which the state can contribute to the sustainability of development. However, the question is to know where the boundaries of the market and the role of the state lie. The study briefly introduces different views of the state's economic role and how states have changed the proportion of their entrepreneurial assets. Among these, it highlights privatization, which is one of the significant segments of today's economic policy practice at both micro and macroeconomic levels. It then describes Brazil's economic circumstances that led to the formulation of a proper size privatization program. Finally, the socio-economic factors that, according to the author, make the realization of Brazilian privatization plans uncertain presented.
-
Testing the Sametest-effect in a BSc-level Business Communication Course Examination
10-15Views:86Using secondary data, we empirically examine two biasing effects that may arise in the written evaluation of large groups of students. Suppose the students take the examination in consecutive groups, and we wish to avoid the distortion caused by tests of different difficulty. In that case, we can decide to use the same examination questions. However, the danger of the "same test effect" arises, according to which the group writing later can perform better if it receives information from the examinees in the previous round. Using the same examination tests cannot be recommended if that effect is significant. Another related potential phenomenon is the "revealed sameness effect". Accordingly, if the examinees are aware of the repetition of the questions, it significantly increases the scores of the following group. We tested these phenomena using the data of a three-round written examination. A previously published analysis of a larger sample found that the "same test effect" can be expected if the students decide in which round they take the examination. Since it was possible to freely register for the examination rounds for the assessment analyzed in this study, we assume that the "same test effect" will be significant. Based on the literature, we also expected that the "revealed sameness effect" would occur in the third round. The performed linear regression analysis (N=77) only found some weak evidence for the 'revealed sameness effect' but not for the 'same test effect'.
-
Local Annealing of Cold Rolled Aluminum Sheets by LASER Treatment
21-26Views:134LASER treatment widely used in material processing technologies. The annealing is not the typical application of the LASER treatment, but this is possible to apply in case of cold deformed metals. In the article a cold rolled EN AW 8006 aluminum sheet is annealed by LASER treatment. The microstructure of the annealed sheets is observed by optical microscopy. An existing cellular automata simulation of recrystallization process is modified to study the LASER annealing. The observed microstructure and the simulated results are compared to determine the further development of the developed automaton.
-
Organisational Culure and Academic Performance of Technical Management BSc Students
1-11Views:145Our study analyses the connection between perceived and ideal organizational cultures and academic results. A modified, self-managed OCAI questionnaire was used to measure perceived and ideal organizational cultures among engineering management students of the University of Debrecen Faculty of Engineering (N = 114). Our results reveal weak positive linear correlations between academic performance and perceived or ideal level of clan culture. In case of other culture types we did not find any consistent relationship. Based on our results students who consider clan culture ideal can expect better results than those who prefer other types. Among students who visit at least 61% of the classes those who reported fitting (or better fitting) perceived and ideal cultures tend to perform better in their studies.
-
Level of Digital Competences and the Examination the Relationship Between Unemployment and in Job-Trainings in the European Union
197-209Views:261In this study we examined the digital competences by the EU Member States between 2015 and 2017 based on data of OECD and EuroStat. We wanted to know, are there any relationship between the unemployment and the level of digital competences. We realised that, in these countries where the percentage of individuals with basic digital skills is higher, there the harmonized unemployment rate is lower, than in those states where the individuals have above-average digital skills. In the case of lower educated states (where the citizens do not have a general digital knowledge), the unemployment rate is higher. We researched the openness of companies towards individuals with different levels of digital knowledge. In these countries, where the more educated people live there provide the comapnies more chance to take part further trainings, than in the less educated countires. We found a moderately strong negative correlation between the group of individuals who have low overall digital skills and in-work trainings. It means, if a country has individuals with a few digital competences, there the organisations will not offer trainings them. According to the available data we could divide the EU Member States in three clusters. These groups are underdeveloped, developing, developed countries. The biggest difference is between these groups in the quantity of skilled people, however the distribution of individuals in the developed group also shows interesting features. We realised in these countries the so-called „reverse competence pyramid”. It means, as the level of skill grows, the number of individuals, who own it, grows as well. As a continuation of the research, it would be worth examining the countries regionally, so it would be clear where are, the "digital kingdoms" can be found. On the one hand this could help the state in the allocation of digital education, on the other hand, it would also improve the position of companies. They could create regional centers in less developed countries, thus outsourcing expensive high added value work.
-
Financial Performance Measurement with the Use of Financial Ratios: Case of Mongolian Companies
20-32Views:319The aim of this paper is to examine the efficiency of Mongolian 100 public companies listed on Mongolian Stock Exchange (MSE) which are divided into 6 major sectors. This study conducts the performance of companies in terms of profitability by using three different output variables i.e., revenue, pretax profit and ROA (Return on Assets). In the beginning of this research, nine variables which are connected with profitability are chosen as output variables, while 24 variables expressing growth, financial structure, solvency, and turnover together with some fundamental financial data are chosen as input variables. 10 variables out of 24 input variables, which determine the financial structure, solvency, and profitability, are chosen as input variables based on the calculation of stepwise regression analysis. Stepwise regression, multi co-linearity analysis are made by SPSS and DEA (Data envelopment analysis) is evaluated by benchmarking package in R excel statistical program covering the period of 2012-2015. This paper uses the input-oriented version of DEA based on financial ratios and some crucial components of a financial statement. The results of DEA show that food and grocery sector was the most efficient, and mining sector was at the second place by its efficiency, while agriculture and service sector were the worse than other sectors.
-
Analysis of Activity Times in the Process of a Wooden Box Manufacturing
475-484Views:140The main target of companies is to earn money and achieve profit. In order to fulfil these needs, companies have to reduce their costs. Cost reduction is often associated with bad quality products, but it could be done in a different way. Sometimes it is enough to examine only their own processes and then benefit from the process optimization, process improvement or process scheduling. In this article a case study is presented, in which the differences in a production scheduling are evaluated with the application of Monte-Carlo simulation and descriptive statistics. At the end of the paper the most efficient material sequence is selected at the manufacturing company by using weighted sum model
-
Monitoring of the Corporate Competitiveness Effect of Tourism Support
603-616Views:173Today the tourism is without doubt strategic of importance in the world. In Hungary's case can be related, that contributes to the performance of the economy largely, and its role is very important in the employment, too. Because of national economic weight it is suitable to analysing, but for the sake of complexity the consideration of economic performance, competitiveness exceptionally complicated task. The two sections are attached most directly, the performace is measurable through the accomodation service and hospitality. Present study does not intend to measure the performance of whole tourism section, the aim is from a corporate side, measure the corporate competitiveness from accountancy datas, the examination of part. The object of the actual examination is monitoring of the profitability effect of tourism supports through the example of 8 companies.
-
Explore Adult Learning Motivations of Various Training Levels
429-444Views:1172Continuous learning is part of everyday life. It may be formal, non-formal or informal nature. The formal learning that takes place at school, is the basis of expertise. Why someone sitting to school? There can be given many answers to this question. The motivation for learning develops due to both internal and external factors. And even age groups and training as equally different. With regard to adult learning motivation was examining several surveys. The study is a summary of the test results. There was three target group: high school seniors, correspondence master's students and participants accredited training. The surveys set out to discover Why learn the various forms of training. The questions in each test were different but comparable. For participants accredited training habitual motivation is crucial. Their joy and pride of the family is less important to them. , Correspondence master's students were considered the most important things income, learning, and knowledge. Although the perception of other age groups, both the habitual and the actual motivation appears in every group. While high school students based on the results we can say that the more motivation to achieve a goal, such as employment, income acquire. so prominent the habitual motivation. In their case it emphasized that a distinction was made between friendship and relationship network. Namely, the friendships are not identified with the mere knowledge that may be necessary in order to achieve future goals.
