Search
Search Results
-
Preliminary results of the combined production of duckweed Spirodela polyrhiza and common carp (Cyprinus carpio) in an aquaponic system
83-89Views:65As a result of population growth, increasin amount of food is needed, and agriculture is under an increasing burden to meet these needs. Traditional agriculture is often attacked due to its environmental impact. We must find alternative, environmentally friendly ways to produce more food. Aquaponics is a closed system in which we can produce both fish and plants at the same time. Duckweed species are small, aquatic, floating plants belonging to angiosperms. It can potentially be an alternative protein source, due to its high protein content, good amino acid supply, and rapid growth. Under suitable conditions, it doubles its weight in 2–4 days, and can reach a yield of 30 t ha-1 year-1in dry matter. It forms a carpet on top of the water and can be found in slow-moving or still waters. Since they are resistant to a wide range of nutrient concentrations, they are also suitable for cleaning wastewater (such as eutrophicated lakes, sewage reservoirs, liquid manure storage). Fish feed is the primary nutrient source for aquaponic systems, which usually contains fishmeal. If duckweed can be used as an alternative for fishmeal in the feed, it could improve the sustainability of the aquaponic and aquaculture systems. In this study, the aim was to develop an optimal harvesting protocol for duckweed Spirodela polyrhiza under aquaponic conditions. In a four weeks experiments, four harvesting protocols were set up, a control where only biomass measurements were made, a 25% group where 25% of the biomass at the time of measurement was harvested, and a 50% and a 75% group where at the time of measurement 50% and 75% of the biomass was harvested. Three replicates were used per treatment. We weighed the biomass every week and removed the amount corresponding to the group. Based on the preliminary results, it can be said that more biomass was obtained in the groups with the 25% harvesting protocol and the control group.
-
Tulip bulbs preparation by heat treatment for forced culture in green house
70-72Views:71Tulip can be grown in parks as ornamental plant and cut flowers, or possibly in protected areas for cut flowers during winter and early
spring.
An important condition for the successful cultivation of tulips is the quality of the bulbs that are going to be planted and their
biological preparation.
Under the quality aspect bulbs have to be uniform and large, preferably with circumference greater than 11 cm and must have good
phytosanitarical status.
Preparation of organic bulbs for ensuring the continuation of the differentiation process of germs (floral), is made during the storage.
It is known that the preparation of organic bulbs are made in interaction with environmental factors, among which temperature plays an
important role. At the beginning and throughout the process of biological preparation, temperature is maintained at a higher level then the
temperature must be low until planting.
The temperature level and the duration of treatment varies by followed objective respectively early or late flowering and staggered
flowers production over a longer period of time. -
The comparison of sperm motility and density in four different goldfish (Carassius auratus) types
135-140Views:126Different goldfish types play an important role both in ornamental fish farming and science. Considering its historical background, the goldfish is a suitable model animal for the study of artificial selection as well as for developmental biological studies. Sperm motility and cell density is an important parameter in determining sperm quality. The aim of our study was to examine the effects of different goldfish types on the sperm quality. Several sperm motility parameters (progressive motility (pMOT, %), straight line velocity (VSL, μm s-1), curvilinear velocity (VCL, μm s-1), linearity (LIN, %), amplitude lateral Head Displacement (ALH, μm), Beat Cross Frequency (BCF, Hz)) of four different goldfish types (Common goldfish-“wild type” N=5, Shubunkin N=4, Black Moor N=4, Oranda N=5) was compared during 60 hours (at 12-hour intervals) at refrigerated storage (4 °C). The variability of sperm density was also investigated in all types. A similar cell concentration was determined in the four goldfish variants (Common goldfish 2.01*1010 ± 3.46*109; Shubunkin 1.71*1010 ± 3.25*109; Black Moor 1.66*1010 ± 3.02*109; Oranda 1.56*1010 ± 5.83*109). Statistically significant difference between the 4 goldfish types in the motility parameters and cell density was not noted. However, a decreasing tendency in Black Moor sperm motility parameters (pMOT, VCL and VSL) was observable, as well as a reduced spermatozoa density in Oranda was also recorded. Our results can contribute to the improvement of the common hatchery propagation of goldfish. Future studies can add more evidence of the possible effects of artificial selection on the reproduction in different goldfish types.
-
The effect of crop coverage on the daily dynamism of the soil’s CO2 emission
97-102Views:89Nowadays one of main goals of international ecosystem research the measurement of greenhouse gases (CO2, N2O and CH4) in different places. The fluctuation of these greenhouse gases – quantity and trend in the case of CO2 and CH4 – could be diverse with atmosphere because it depends on several effects of factors like climate, soil type, vegetation. In grassland out of the three greenhouse gases which fill a part in gas emission, in the case of CO2 soil and vegetation are the most important factors (Soussana et al., 2007).
In the aspect of global carbon balance grasslands are very important by their large area extension, total carbon content, organic content store (10% of the global carbon storage) (Lemmens et al., 2006). In this summer measurements were carried out to determine CO2 emission of the soil from different soil surfaces like grass covered and bare soil surface during a whole day. -
Assessment of Environmental Susceptibility/Vulnerability of Soils
62-74Views:86Soils represent a considerable part of the natural resources of Hungary. Consequently, rational land use and proper soil management – to guarantee normal soil functions – are important elements of sustainable (agricultural) development, having special importance both in the national economy and in environment protection.
The main soil functions in the biosphere are as follows: conditionally renewable natural resource; reactor, transformer and integrator of the combined influences of other natural resources (solar radiation, atmosphere, surface and subsurface waters, biological resources), place of „sphere-interactions”; medium for biomass production, primary food-source of the biosphere; storage of heat, water and plant nutrients; natural filter and detoxication system, which may prevent the deeper geological formations and the subsurface waters from various pollutants; high capacity buffer medium, which may prevent or moderate the unfavourable consequences of various environmental stresses; significant gene-reservoir, an important element of biodiversity.
Society utilizes these functions in different ways (rate, method, efficiency) throughout history, depending on the given natural conditions and socio-economic circumstances. In many cases the character of the particular functions was not properly taken into consideration during the utilization of soil resources, and the misguided management resulted in their over-exploitation, decreasing efficiency of one or more soil functions, and – over a certain limit – serious environmental deterioration.
Soil resources are threatened by the following environmental stresses:
– soil degradation processes;
– extreme moisture regime;
– nutrient stresses (deficiency or toxicity);
– environmental pollution.
Environmental stresses caused by natural factors or human activities represent an increasing ecological threat to the biosphere, as well as a socio-economic risk for sustainable development, including rational land use and soil management.
The stresses are caused by the integrated impacts of various soil properties, which are the results of soil processes (mass and energy regimes, abiotic and biotic transport and transformation and their interactions) under the combined influences of soil forming factors. Consequently, the control of soil processes is a great challenge and the main task of soil science and soil management in sustainable development.
The efficient control of these processes necessitates the following consecutive steps:
• registration of facts and consequences (information on land and soil characteristics, land use, cropping pattern, applied agrotechnics, yields, with their spatial and temporal variability);
• evaluation of potential reasons (definition and quantification of soil processes, analysis of influencing factors and their mechanisms);
• assessment of the theoretical, real, rational and economic possibilities for the control of soil processes (including their risk-assessment and impact analysis);
• elaboration of efficient technologies for the „best” control alternatives (best management practice).
Scientifically based planning and implementation of sustainable land use and rational soil management to ensure desirable soil functions, without any undesirable environmental side-effects, require adequate soil information. In the last years such data were organized into a computer-based GIS soil database in Hungary, giving opportunities for the quantification, analysis, modelling and forecasting of the studied environmental stresses and for the efficient and scientifically based prevention, elimination or reduction of environmental stresses and their unfavourable ecological and economical consequences.
Special attention was paid to the assessment of various soil degradation processes, as: (1) soil erosion by water or wind; (2) soil acidification; (3) salinization and/or alkalization; (4) physical degradation (structure destruction, compaction); (5) extreme moisture regime: drought sensitivity and waterlogging hazard; (6) biological degradation; (7) unfavourable changes in the plant nutrient regime; (8) decrease of natural buffering capacity, (9) soil (and water) pollution.
The actions against undesirable environmental stresses and their unfavourable consequences are important elements of sustainable, efficient, economically viable, socially acceptable and environmentally sound crop production and agricultural development. These are joint tasks of the state, decision makers on various levels, the land owners, the land users and – to a certain extent – of each member of the society. -
Coherence and connection between the good pond culture practice and the environment conscious management
60-73Views:73According to the data indicating the decline and restructuring during the past decade, as well as the trend in the European Union member states, it can be expected that the role of traditional agriculture and fish production in direct rural employment decrease further. This also values those strategic directions for restructuring that will lead fishculture from quantity driven to quality production along with sustainable development (i.e. environmental conscious production) and multifunctional farming. This way the economic and social tensions caused by the concentration of the production and labour output can be mitigated.
It is laid in the 1257/1999 Act on rural Development that farmers that enrol the agri-environmental scheme should follow the “Good Agricultural Practice” on the whole managed area. In case of agri-environmental schemes this is a precondition for which no grants are given.
The adaptation of “Good Agricultural Practice” in fishproduction,where it is called: “Good Pond Culture Practice” is considered important on the basis of the above mentioned. This programme is undertaken in co-operation with the Research Institute for Aquaculture, Fisheries and Irrigation, University of Debrecen, Faculty of Agricultural Economics and Rural Development and the Association of Hungarian Fish Farmers and Product Council.
The European Commission proposed the formulation of the European Fisheries and Aquaculture Fund (EFAF) for the period 2007-20013, which will replace the Financial Instruments for Fisheries Guidance (FIFG), but it also consists of several new elements and will be working differently, too. According to the proposal the budget for the Fund will be nearly 5 billion EUR (4963 million EUR). The development level of aquaculture and fisheries and the social and economic significance in the given member state will be considered when distributing the Fund between the Member States.
According to the plan the Fund is organised along five priority axes, of which the most important for the Hungarian fisheries sector is No. II: Aquaculture and the processing and marketing of aquaculture and fisheries products. The main measure areas are the followings:
1. investment support for aquaculture;
2. support for aquatic-environmental schemes;
3. environmental- and animal health issues;
4. investments in processing and marketing
In case of accessing support under measure area No. 2 farms are obliged to meet the requirements of the scheme beyond the “good management practice” for 5 years, which is to be supervised by the approved body of the Member State. For this reason our work is considered to be substantial.
Approval of the application of “Good Pond Culture Practice” is based on two elements: first the prevailing environmental and nature conservation regulations, as well as the list of controllable conditions in the new agri-environmental agreements are to be met. “Good Pond Culture Practice” are to be conducted on the whole farm area. Its main elements are:
- nutrition management,
- feeding,
- pond maintenance,
- stocking,
- harvesting,
- animal welfare (storage and over-wintering). -
The effect of plant density on the yield of sweet potato
125-128Views:349A field study was conducted in South-East Hungary during the main cropping season of 2016, 2017 and 2018, with the objective of determining the effect of plant spacing on the productivity of sweet potato. Production technology experiments of four repetitions were set up in a randomized block design on sandy soil. The performed treatments consisted of four variations of plant spacing (row distance x plant-to-plant distance): 80 cm x 20 cm, 80 cm x 30 cm, 100 cm x 20 cm, 100 cm x 30 cm. The plant material was the Hungarian registered sweet potato variety ‘Ásotthalmi-12’. Analysis of variance revealed that planting density significantly affected the average yield of storage roots. The highest yield per plant was achieved with the 100 cm x 30 cm (2016, 2017), as well as with the 80 cm x 30 cm (2018) setups. On hectare level, our results showed that the highest plant density of 62,500 plants ha-1 (80 cm x 20 cm setup) could give the highest yield. Comparing the highest tons ha-1 results to those achieved with the plant spacing setups resulting in the highest yield per plant, the differences can be even 13 or 14 tons at hectare level. This finding underlines the importance of choosing the proper planting density towards the higher end.
-
Application of the SDS-PAGE method for the characterisation of winter wheat flour quality
112-118Views:101The principle, development and importance of the SDS-PAGE method are presented in this article. The SDS-PAGE method has become one of the basic methods of molecular biological research, because it is widely applicable and its sensitivity is excellent in the separation of wheat storage proteins.
We have shown the application of this method with a concrete example. It was also tested whether, it was possible to obtain a better baking quality product from a large amount of poor quality less valuable wheat by fractioning the flour according to particle sizes after grinding. We studied the rheological properties of flours with different particle size fractions from the original flour. The baking quality of the original flour was B2. The 125-90 and 90-63 μm fractions have significantly better baking quality (B1) than the original flour. The protein contents of these flour fractions were also significantly higher than the protein content of the original flour. We had a question: what has influenced the baking quality: the protein content or other factors? We searched for an explanation on these results in the protein composition of the flour samples. We studied the distribution of glutenin-fractions by SDS-PAGE method and evaluated them. We found with correlation analysis that the amount of LMW-Glutenin D-group (52-60 kDa) is in a strong, negative correlation to the baking quality (r = – 0.855*). Therefore, the baking quality of flour samples was influenced by this glutenin fraction. -
Production of novel fermented milks
303-305Views:172The objective of this research was to test the influence of various natural substances on acid production, growth, and viability of characteristic microorganisms in yogurt and probiotic fermented dairy foods. Oligofructose, inulin, honey, and the dried biomass of Spirulina (Arthrospira) platensis were found to stimulate the growth rate and acid production activity of the major thermophilic diary cultures tested and, in addition to this, the presence of the aforementioned substrates also improved the survival of starter bacteria in fermented milk products during storage. The reduced production time of cultured milks resulted in increased production efficiency. The stimulatory and/or protective effect of oligofructose,
inulin, honey, and Spirulina on Bifidobacterium spp. is probably the most important finding of this study because bifidobacteria do not grow well in milk and they have low survival rates in conventional fermented milks. Some of the bioactive substances tested were also capable of exerting an antifungal effect on spoilage yeasts and molds, and improving the nutritional and sensory properties of the final product, thus providing a new opportunity for manufacture of functional fermented dairy foods. -
Chemical residue coming forward in an end product in winery technology
81-86Views:65Although many tasks wait for me yet in the course of my research work, I’ve managed to book successes with a certain degree.
On the one part as a producer I regard it as a positive result, that in the capital end product manufactured by me, - that is the wine - , has no chemical residue in it, and in the rest of the intermediary products has measure dwindling only.
On the other hand, that I hit home in cases demonstrable agent residual one in the must, wine, lees, the tendency indicates it, that in the course of the processing (distillation) or the storage they partly, or whole decay (Table 4. and Figure 3.) and a food safety risk is not caused.
But it’s a question for the future, that the more considerable quantity manifested in the grape pip does or not cause a problem in the course of its use with a cosmetic aim, concerned, that the reason of the agent wandering experienced in the other products is the relative density, or possibly the result of some kind of bond.
So I go on with my research and my aim is to gove the most exact answers for those questions, above. -
Pre- and postharvest technologies to extend the shelf life of Prunus cerasus
85-89Views:210Fresh tart cherry consumption cannot be increased without the development of an appropriate technology for its elongated storage. This requires the development and optimization of the pre- and postharvest treatments. Currently, we have only limited knowledge about tart cherry (Prunus cerasus L.) postharvest technology, however, related studies on sweet cherry (Prunus avium L.) may be adopted. In this article, we have collected the most important research results in this topic.
-
The analysis of the fair data of a solar energy power plant with SPSS
60-63Views:88The use of fossil energy sources greatly damages the environment. Moreover, the quantity of these energy sources is limited. Therefore, it is important to increase the share of renewable energy sources (solar, wind, water and biomass) in energy generation.
Huge amounts of energy (1100-1300 kWh/m2 per year) arrive at the earth from the sun, and are utilized in passive and active ways. One of the active applications is photovoltaic current production, in the course of which electricity is produced directly with PV – panels. This can be fed into a grid. At the University of Debrecen is a solar energy power plant from September 2005 in operation. The electricity performance of the incorporated PV-panels (Kyocera, Dunasolar, and Siemens) are 8.64 kW. The are of PV – panels is 110 square meter. With the aid of the data storage, the tension, current, temperature of the PV-panels, global radiation, air temperature, wind speed, wind direction and the achievement is measured by the ac network.
The effect of the shading on the performance of the PV – panels and the solar energy power plant is examined. The analysis and the graphic representation of the experiment results are carried out with SPSS per grief. We produced per grief. -
Coagulase-negative staphylococci in ewe udder surface and raw milk samples
221-225Views:133Coagulase-negative staphylococci (CNS) are among the major causes of subclinical mastitis in dairy ewe flocks. This has a financially significant impact on the ewe dairy sector and consumer health. The determination of the bacterial count, particularly CNS, is critical in terms of the quantity and quality of ovine milk. Thus, the purpose of this study was to quantify the CNS count in the udder surface and raw milk samples of the ewe, in addition to identifying CNS strains (n=8) collected from udder surface and individual raw milk samples by 16S rRNA gene sequencing. A total of 164 samples of udder surface and raw milk originated from four sheep farms were tested. The obtained values were compared between the different farms. Furthermore, values during 2018 and 2019 in the case of Farm I were compared. Significantly higher (p<0.05) average count was observed in udder surface samples taken from Farm I (2.8±1.0 lg CFU/cm2) than that of Farm III samples (2.3±0.6 lg CFU/cm2). In the case of individual raw milk, the higher value was observed in samples derived from Farm III (3.5±0.9 lg CFU/mL), while the obtained value was significantly lower (p<0.05) in samples originated from Farm IV (1.8±0.4 lg CFU/mL). In the bulk tank milk samples, the highest mean value was 5.3±0.4 CFU/mL, and there was no significant (p>0.05) variation between farms. Coagulase-negative staphylococci counts were decreased to a certain extent in both sample types tested during 2019 except for individual raw milk derived from the Tsigai breed. The correlation between the mean CNS counts of udder surface and individual raw milk was very weak (r=0.048). Staphylococcus simulans, Staphylococcus auricularis, and Staphylococcus equorum were identified by molecular sequencing and Staphylococcus simulans were the most frequently identified CNS species. A higher CNS count of bulk tank milk than individual raw milk indicates possible contamination during milking and storage. Therefore, further studies are required to investigate the other sources of bulk tank milk contamination to improve the hygienic quality of milk.
-
Development opportunities for storing and displaying of spatial data in long-term experiments
81-86Views:113Long-term experiments are required to evaluate the impact of irrigation, nutrient utilization, and year factor as well as to assess the potential consequences of climate change. However, in the long-term experiment, it may be necessary to display spatial data for each parcel, either for investigation of soil heterogeneity or presentation. This article aims to provide help for researchers working in long-term experiments for storing and displaying spatial data.
After the outlines of each experimental site were measured with GPS, a spatial database has been created in Quantum GIS. Then, a filter script in R statistical environment using RStudio graphical interface was written. The script helps avoid the QGIS data input interface so that large data can be attached to each parcel directly and as a result there is no need for a separate data entry, only the basic statistical database.
The created GIS database can be used in many ways; it can be exported to KML file format that can be displayed using Google Earth. It is possible to view exported KML files in Google Drive with importing them to Google My Maps application, and with that a browser can display the map. With the Google Drive the maps can be shared within the research group, additionally the outlines can be edited and it is possible to upload the measurement data to the attributes table to existing empty table columns. The map created in Quantum GIS can be used for presentation purposes.
-
Use of extensigraph in the examination of wheat flours
17-23Views:119The extensograph is widely used in quality control and research laboratories studying wheat flour quality. The most commonly used measurements include Rm, the maximum resistance (maximum height of the curve); R5 the resistance at a constant extension of 5 cm; E, extensibility (total curve length); Rm/E, the ratio of maximum resistance to extension; and A, the area under curve. The extensograph has proved useful in the classification and assessment of flours on the physical dough properties. Another important application is its use in wheat breeding programs. Furthermore, extensograph is an excellent tool to study the effects of a wide range of ingredients on dough properties of wheat flour (like oxidants, enzymes, salt and additives), and it can also be used measure the changes during the frozen storage. In the present study we provide a review of the scientific literature concerning the possible applications of the extensograph.
-
Microbial assessment of potential functional dairy products with added dried herbs
59-63Views:114The market of dairy products is a dynamically developing sector of the food industry. Potential, functional dairy products, made by adding herbs or spices, will have antimicrobial and antioxidant effect due to the active biochemical agents of the plant additives. Furthermore, these active components will widen the storage life of food products and enhance their organoleptic properties too. We worked out a technology for creating fresh cheeses using a gentle pasteurizing method by treating the mixture of raw milk and 1.5% fat contained in commercial milk. As herb additives, we used citronella (Melissa officinalis), and peppermint (Mentha x piperita) harvested by us and dried them via Tyndall-method in convective dryer on 40 °C for 5.5 hours per day. The drying period took three days. We bought dried citronella and mint from the supermarket, which were dried by ionizing radiation, to compare the microbiological pollution with the herbs dried by us.
The main target of this research was to create a microbiologically stable, potential functional dairy product. However, because of the bad quality of the raw milk and the gentle heat treatment we used for sterilizing bulk milk, or else, cheeses were not safe for human consumption. As a consequence, we need further studies to modify our technology and get a microbiologically stable product.
-
Saccharomyces cerevisiae growth kinetics study dairy byproduct
169-172Views:167By guess, annual volume of milk whey is 185–190 million tons and this volume probably will increase next years. Whey has significant biochemical oxygen demand due to its high organic matter content so whey as sewage is one of the most pollutant by-products in the food industry. Apart from environmental pollution, benefit of several whey constituents for human health is another reason to utilize whey. Corn and potato, as well as the processing of milk in the food industry in large quantities of by-products generated by low cost, substantial quantities of starch and lactic acid, which are due to high biological oxygen demand are considered as hazardous waste. Some of them are destroyed sewage storage tanks, and those products are excellent substrates for the growth of microorganisms could be. The traditional nutrient solution optimization methods are solution and time-consuming and are not able to determine the real optimum because of the interaction of factors involved.
-
Effect of dietary fatty acids on the oxidative stability and the colour of broiler meat
25-30Views:78The aim of our investigation was to determine the effects of increased PUFA (polyunsaturated fatty acids) content on the colour, total pigment content, organoleptic characteristics and oxidative stability of poultry meat. The experiment was carried out with 1200 Ross-308 cock chicklings. Animals were fed with a 3 phase diet, and in each phase, additional fat was added to the feed. The isocaloric and isonitrogenic feed was produced as the breeder organization suggested; only the fat content differed (4 treatments: pig fat (lard), sunflower oil, soy oil, flax-seed oil).
The different fat complements did not influence broiler production. However, the fatty acid composition of meat was similar to the fatty acid composition of feed (additional fats). The analyses of meat samples, after a storage period, did not significantly prove the possible negative effects of higher PUFA content. -
Optimized balance between crop productivity, restoration and maintenance of vital soil functions and soil carbon sequestration and storage – the SmartSOIL (FP7) project
213-215Views:93Soils provide the most indispensable function of supporting the production of food and feed for a growing human population. At the same time they provide a range of regulating and supporting functions related to climate change and removal of greenhouse gases. The majority of the soil functions are closely linked to the flows and stocks of soil organic carbon (SOC); low levels of both flows and stocks may seriously interfere with several of the essential soil functions and thus affect the ecosystem services that soils deliver. Soil degradation is considered a serious problem in Europe and a large part of the degradation is caused by intensive cultivation practices in agriculture. The aim of the SmartSOIL project is to link the results of different scientific fields through a holistic and multidisciplinary approach and as a result develop a decision making tool contributing to sustainable development.
-
Essential oil extraction from herbs and their use in the food industry
59-74Views:343Essential oil extraction of wild caraway and thyme was performed using a classical (HD) and microwave hydro-distillation (MWHD) and a laboratory supercritical fluid extraction (SFE) with a carbon dioxide as solvent. Our experiments demonstrated that the extraction yield of the essential oil performed in same conditions was influenced by the location of growth area; the maximum extraction yield of 10 ml 100 g-1 caraway was obtained from dried seeds collected from Csíkmadaras. This quantity far exceeded the yield of the Újtusnád samples. In the case of wild caraway (Carum carvi L.), the extraction method influenced thecomposition of the essential oil (carvone/limonene ratio), the highest limonene content being achieved by classical hydro-distillation. In the case of thyme, this effect was not detected, the thymol/carvacrol ratio was independent from the given extraction method. The obtained thyme essential oil possesses high antimicrobial activity demonstrated by agar diffusion test. The thyme extract provides a good protection against microorganisms collected on the surface of fresh vegetables following bacterial stains: Citrobacter portucalensis, Pseudomonas hunanensis, Pseudomonas baetica, Pseudomonas parafulva, Bacillus mojavensis and Enterobacter cloacae. Protective effect was also detected on the vegetable surface of by chitosan-based edible film coating during a 6-day-long storage period at a temperature of 4 °C. The caraway essential oil used as soft cheese seasoning with a direct, dilution-free method, proved to be unsuitable because the uneven distribution and confer a strong, unpleasant taste to the product in comparison with the ground wild caraway seed-dressed cheese.
-
Tenability of ram semen
63-66Views:109It could be stated that the diluted semen of Awassi rams taken in the breeding season preserved its fertilizing abilityat different temperatures for different periods of time. The motility of spermatozoa kept at 23 vs. 8oC was checked daily. The largest spread of data was observed 24 hours after taking the semen, then the motility rate of cells showed a linear decrease. Motility results of fresh and frozen-thawed samples were compared also after heat resistance test and significant differences were found between these groups. Significant individual differences were observedin the sperm motility after heat resistance test.
-
The role of some elicitors in inducing chilling stress resistance in apricot fruit
27-32Views:139This study aimed to study the role of 2 mM salicylic acid and 0.2 mM methyl Jasmonic acid in reducing the chilling injuries on two different apricot varieties fruits (Bergarauge and Flavor cot). These treatments were applied for apricot fruit directly after harvest after measuring the zero time data. Then the fruit were stored at 1 oC for three weeks and were examined 7 day periodically, other group of fruit was stored at 1 oC for 15 days then transport to room temperature and examined after 4 and 8 days. The fruit samples were collected at each examination time, and the measurements containing the fruit firmness (Kg cm-2), chilling and decay index, membrane electrolyte leakage, total phenol content and phenylalanine ammonia lyase mechanism (PAL) activity. The results showed that there are no obvious differences between the tested varieties and the differences may back to genetic variations and they took the same trend for most of measurement after treated with SA and MJ. SA and/or MJ treated fruit achieved low percentage of fruit softening in comparison to water treated fruit. At the same time the chilling and decay index showed that the SA and/or MJ reduced the decay or breakdown symptoms in either tested varieties. The treated fruit with those elicitor help the fruit to keep about stable phenol content while water treated fruit lose the phenol content sharply at early storage and this stable level of phenol my because of the ability of those chemical to raise PAL activity in treated fruit.
-
Determining factors of test weight in maize (Zea mays L.)
40-42Views:92Most domestic maize production products are sold on markets abroad. Among the increasingly restrictive quality requirements, the demand for the measurement of test weight has also appeared. This measurement is not unfamiliar in the case of other cereals, such as wheat and barley, but it has not been applied widely in maize. It is likely for this reason that we have such little information and research available on this topic. In this study, we show the current state of this field with references from domestic and international literature.
The density of maize is the weight of a particular volume and the most frequent unit is the test weight (kg/hl). This physical quality factor plays important roles in the storage, transport and mill industries. The value of test weight is influenced by many factors. The most important ones are the moisture content of grains, drying temperature, drought, precipitation, early frost, and the hybrid characters of a given genotype (grain type, FAO number). In general, the grain with higher moisture content has lower test weight and the higher temperature during (above 82°C) desiccation also leads to unfavourable values. Factors such as a drought interval after flowering, early frost in the case of hybrids with higher FAO numbers, injuries by insects, as well as fungal infections also influence the structure and moisture content of the maize grain.
In the future, broader studies (hybrid testing, application of new agrotechnical elements) will be needed for understanding of the factors effecting test weight. -
Microbiological quality of bulk tank raw milk from two dairy farms in Hajdú-Bihar County, Hungary
105-112Views:290Two main channels have been identified to be responsible for microbiological contamination of raw milk and milk products. Firstly, contamination has occurred due to udder infection from the cow or the blood which harbours most bacteria that come in contact with the raw milk. Secondly, via external factors (may include faeces, skin, contaminated water, environment etc.) which are associated with the operation of milking. There is direct contact with the milk and/or surfaces before, during or after the milking, posing public health risk and economic decline. The aim of this study was to examine the bacteriological quality of bulk tank raw milk samples collected from two different size dairy farms (Farm 1 and Farm 2) of different housing forms (cubicle loose and deep litter) in Hajdú-Bihar County, Hungary in July, 2017. Three samples were taken from each farm, and the total plate count, coliform count, Escherichia coli count, Staphylococcus aureus count, and yeast and mould count were determined in them.
The results clearly showed low level of all measured bacteria group load in Farm 1 samples in comparison to Farm 2 with the exception of coagulase-negative Staphylococcus (CNS) which represented high level in general, indicating significant difference (P<0.05). The mean value of total plate count in Farm 2 samples was higher (1.0 × 105 CFU/mL) than Farm 1 samples (2.8 × 104 CFU/mL). There was a significant difference (P<0.05) in mean count of coliforms in raw milk samples between Farm 1 and Farm 2. Similarly, results of E. coli were significantly different (P<0.05) with mean count of 1.44 × 102 CFU/mL and 2.02 × 103 CFU/mL for Farm 1 and Farm 2 respectively.
Results of Staphylococcus aureus also showed significant difference (P<0.05) with mean count of 9.7 × 101 CFU/mL for Farm 1 and 6.28 × 102 CFU/mL for Farm 2. The mean of mould count recorded was 1.07 × 102 CFU/mL and 4.93 × 102 CFU/mL for Farm 1 and Farm 2 respectively. The recorded mean of yeast count was 1.68 × 103 CFU/mL and 3.41 × 103 CFU/mL for Farm 1 and Farm 2 respectively; however, both farms showed no significant difference (P>0.05) in terms of mean of mould and yeast count. Although Farm 2 produced six times lower milk quantity than Farm 1, the measured microbial parameters were high. Both farms’ microbiological numbers were higher above the permitted limit values as stated by Regulation (EC) No 853/2004, Hungarian Ministry of Health (MoH) 4/1998 (XI. 11.).
This could be an indication of non-conformance to effective GMP, ineffective pre–milking disinfection or udder preparation, poor handling and storage practice, time and temperature abuse and inadequate Food Safety Management System Implementation. Therefore, our recommendation is as follows; establish control measures for pre- and postharvest activities involved in the milking process which would be an effective approach to reduce contamination of the raw milk by pathogenic microorganisms from these farms, strict sanitation regime and hygiene protocol be employed and applied to cows, all equipment, contact surfaces and minimize handling of the milk prior, during and after milking. This will also serve as scientific information to the producers for continual improvement in their operations.
-
Bioenergy production: are the objects realistic??
53-58Views:80Currently we do not have the possibility to define our energy reserves, since we do not know the magnitude of extant material resources. The known petroleum (crude) supply will be sufficient for about 100 years at the longest, and according to the latest estimates in 2008 we will reach and even exceed the maximum level of oil extraction, and after this it is going to decrease.
Hungary has good givens to go upon the way of sustainable energy economy according to experts, however a coherent government policy that lasts for not just one period is essential, and a sound economic- and agricultural policy is needed as well. According to the FVM’s under-secretary in Hungary more than 1 million hectares can be disposable for energy crop production. This would mean that 20 percent of the fields would be taken away from food production and on these fields energy crops would be grown. But we also have to take into consideration that the increase in energy plant production could happen at the expense of food production. If we would like to ensure the food for Hungary’s population from national sources we have to make calculations in determining energy need. In my research I set out the objective to determine the level of that specific turnover and marginal cost which supports the profitability of grain cultivation. With these indicators it is possible to analyze the economy and competitiveness of growing energy crops in the region of the North Plain. The alternatives of using cereals and rational land use should be also considered. A developing bio-fuel program can be a solution for the deduction of excess grain that is typical in Hungary for several years in the cereals sector. The pressure on the national market caused by excess grain can be ceased or moderated, and therefore the storage problems would decrease as well.