Search
Search Results
-
Review of research on salt-affected soils in the Debrecen agricultural high educational institutions, with special focus on the mapping of Hortobágy
471-484Views:87The history of the research of Debrecen scholars on salt-affected soils of Hortobágy and the region is very rich and diverse.
Focusing on mapping, the following stages can be distinguished, indicating the completeness of the maps and the purpose of the performed work
− First, quantitative maps (Arany, 1926) for the utilization of the lands at 1:75,000 (Figure 1).
− Second, quantitative map (Kreybig, 1943) for the utilization of the lands at 1:25,000.
− Third, category map (Kreybig et al., 1935) testing the suitability of the classification system at :75,000.
− Fourth, partial category map (Szabolcs, 1954), showing the reasons of unsuccessful management at 1:10,000.
− Fifth, partial quantitative map (Csillag et al., 1996), showing the utility of digital sampling at 1:25,000.
− Sixth, partial quantitative map (Tamás and Lénárt, 2006), showing the capacity of multispectral remote imagery at 1:100.
− Seventh, partial quantitative map (Douaik et al., 2006), showing the usefulness of geostatistical mapping at 1:10,000.
− Eight, national quantitative maps (Pásztor et al., 2016), showing the applicability of geostatistics for administrative purposes at 1:10,000.
− Ninth, partial quantitative/category map (authors, 2019), finding the optimal methods at 1:10,000. -
Application of GIS, precision agriculture and unplugging cultivation in plant breeding of Karcag
49-56Views:187In the last two decades, the prevailing ecological conditions and climate change have caused negative effects. Therefore, a paradigm shift is needed in the field growing of plants. The latest inventions, digital technologies, precision cultivation are not enough, the mentality of the farmers is more important. For this reason, not only big financial sacrifices, but adequate receptivity are needed on behalf of farmers. Adequate skills and continuous self-education are necessary. The yield of plant growing farms is determined by ecological conditions to a 40% extent, genetic background of the seed has a 30% share and the applied agricultural technology has a proportion of 30%. In different agroecological conditions, bred varieties of plants have bigger tolerance to unfavorable factors of the regions and significant yield stability. Farmers, who buy and sow seeds, can only contribute to the genetic potential of the seeds with cultivation technology. Plant breeding provides stable genetic background and good quality seeds. Breeding activity – choosing variety proposants, breeding them, selection work, classical breeding process for 8-10 years – must create new landraces, which can produce balance, high yield and have good quality parameters in extreme ecological conditions, yearly excursion and have higher tolerance to unfavorable factors of the region giving significant production stability for farmers. In Karcag GIS technology, precision cultivation elements and soil-friendly agrotechnical methods have been introduced which largely support the aims of breeding and can also provide optimal cultivation conditions in extreme years. Because of the specificity of breeding the main aim is not only to increase yield but to provide harmonic growing for bred materials, to decrease the number and the cost of cultivation and to be punctual. In this study, applied new methods and technologies are introduced.
-
Rye plant parameters in the Westsik crop rotation experiment
39-45Views:128Our research work was carried out in the Westsik crop rotation field experiment in 2018. The main research purpose was to analyse the effect of the different organic and chemical fertilizers on parameters of rye. Our results revealed some differences between the different fertilization methods. One spike weight, grain weight of one spike, rye plant height, rye plant weight per m2 and 1000 seed weight in crop rotations VII, XV and VIII were different from the data of all crop rotations. This finding can be explained by the fact that crop rotations VII and XV were non-fertilized, only 23.3 t ha-1 straw manure (VII) or green lupine manure was applied as a second crop (XV). In addition, crop rotation VIII consists of four parts where we apply chemical fertilization with green lupine manure as a main and second crop. There is a positive close correlation between rye plant height and other studied characters (rye plant weight per m2, spike length, weight of one spike, grain weight per spike, spike weight per m2, grain weight per m2 and 1000 seed weight).
-
Using integrated remote sensing methods in the Nagyerdő Natura 2000 area
19-24Views:206The more widely use of GIS, remote sensing technology provides appropriate data acquisition and data processing tools to build several national and international biodiversity monitoring system of environmental protection and natur conservation. The ChangeHabitats 2 is a similar international project, which uses airborne hyperspectral and airborne laser scanning (airborne LiDAR) sources beyond traditional data collection methods to build a monitoring system of Natura 2000 habitats. The goal of our research, on one hand, was to separate the most typical species of trees which can be found in the largest coverage in the research plots of Debreceni Nagyerdő Nature Reserve from field and airborne remote sensing data, use image classification that based on spectral and geometry (height) characteristics of the trees. On the other hand our goal was to evaluate the efficient use of the integration of mobilGIS, airborne hyperspectral and airborne LiDAR data collecting methods to complement or substitut of the traditional, field data collecting methods. We used ArcGIS 10.2 and Exelis 5.0 GIS software for data evaluation, in which the mosaicing, the selection of plots and the spectral image processing were carried out.
-
Effect of agrotechnical factors on the yield of the Grolim asparagus (Asparagus officinalis L.) hybrid on acidic sandy soil
43-48Views:248Research of blanched asparagus has begun at the University of Debrecen Institutes for Agricultural Research and Educational Farm Research Institutes of Nyíregyháza in 2011. Establishment of the plantation took place in May 2011. The Grolim hybrid was used in the trial, 16 medium plot trial area has been formed under field conditions, with four repetitions and 36 m2 plot size. In the course of our studies, the effect of different nutriment supply methods (untreated, manure, sheep manure compost, fertilizer) has been analysed on the spear yield of the Grolim asparagus hybrid between 2013 and 2017.
In our studies, the beginning of vegetative growth has been recorded upon the constant presence of 10 °C of average soil temperature in the case of the Grolim asparagus hybrid. The beginning and length of spear harvesting are both influenced by the time and dynamics of initial development in spring. During the analysed period, the dates of spear harvesting were various, the earliest being on 23rd March, 2014 and the latest on 23rd April, 2015; the rest of the three years have been varied within this one month interval. The total of heat units required for the vegetative development of spears has been determined; it provides important information for cultivation practice.
Spear yields turned out to be hectic during the analysed period. In 2013 and 2014, yields have surpassed the amount of 50 kg/harvest period/plot in the case of every treatment version. However, in 2015 a significantly lower specific yield has been recorded due to the unfavourable weather conditions in spring; a yield decline of nearly 50% was recorded in the case of the control treatment compared to the previous years. Yield was also lower in the rest of the fertilization treatments compared to 2014; however, in these cases, the degree of yield decrease was around 5–10%, which suggests the yield stabilising effect of fertilization. In 2016, a slight yield increase was measured in comparison with the base year. In 2017, there was a decline of yield in the control treatment; however, the different fertilization treatments resulted in yield increase as compared to previous years.
On the basis of our studies, it is clear that the best yield results have been provided by the artificial fertilization treatment in all of the five analysed years. It was followed by the sheep manure compost and manure treatments in terms of their effect on spear yield. During the three harvesting periods, the lowest yield on acidic sandy soil was recorded in the case of the control treatment. The most remarkable effect of nutriment treatments has been realised in terms of the decreased deviation of yield results, which perfectly represents the yield stabilising effect of nutriment supply in the case of perennial crops – asparagus – as well, even on a poor nutriment supply characteristic sandy soil.
-
Comparison of the sample preparation methods worked out for the examination of the element content of wine
77-82Views:174The examination of the potentially toxic elements content of the wines is not easy task, because the most elements are in little concentration (mg kg-1 or μg kg-1) in the wine and the wines contain great amount of organic matrix. The efficient sample preparation is essential for the accurate determination of element content. The eim of our research was to determine which sample preparation method will be the most efficient in examination of wines with ICP technology. The examined wine sample was a 2008 Chardonnay from the Eger wine region. We did the sample preparation and analysis examination in University of Debrecen, Centre for Agricultural and Applied Economic Sciences, Institute of Food Science, Quality Assurance and Microbiology.
We did the analysis examinations with ICP- MS (inductively coupled plasma mass spectroscopy). We always did the sample preparations and the examinations in three times rehearsal. The applied sample preparation methods: dilution with distilled water, open digestion and microwave digestion.
We were able to measure B, Al, Mn, Fe and Zn with only dilution and open sample preparation. In the smaller quantity present Sr and Ba were measurable in the wine in the case of all three methods well. We were able to measure the Co with dilution and open digestion method, while Cr, Ni, and Te with only dilution method. In the case of arsenic we were not able to measure reliable result with dilution and open digestion method because of organic matrix and other components
(alcohols, monosaccharides, polysaccharides, polyalcohols and inorganic salts). On the whole we are able to say that in the case of certain elements (B, Mn, Fe, Zn, Sr, Ba) the open digestion and dilution sample preparation is applicable well, however, in the case of certain elements (As, Al, V, Cr, Se, Mo, Cd, Hg, Pb) we have to develop the methods. It may be development of one of the way, if we develop sample preparation methods to examined element specifically and not
to wine generally. -
Some methodological aspects of animal behaviour during beef cattle grazing
31-35Views:129Ethology, the research field of animal behaviour, during the past half century developed into an independent science and became more important in recent years as the farming industry has turned toward quality production. Farm animals respond for every environmental factor. Essential to know the answers to avoid unpleasant economic consequences. Based on the shepherds’ experience, this science has merged with modern technology, constantly expanding and searching new methods. According to the literature the article summarizes the observation methods in cattle grazing. This paper introduces the beginnings and shows the future trends. Finally we share personal experiences as the Hungarian Grey cattle grazing behaviour at conditions of Hortobágy, Hungary.
-
Interactive evaluation of the main agrotechnical factors in rape production
71-79Views:132Our polifactorial rape research was carried out at Látókép Research Centre of Debreceni Egyetem AMTC, 15 km away from Debrecen. The aim was to study the unique effect and the interactive effect of more factors. The research factors were the following: cultivation, time of sowing and nutrient supply. Soil moisture datas proved unambiguously that increasing amounts of chemical fertilizer raise the water consumption of rape, lack of water in fertilized plots were always bigger then the water deficit in control plots. The highest amount of water deficit was experienced in the case of arable plots. However, increasing amounts of chemical fertilizers raised the amount of yield proportionately. We experienced yield depression only in the case of arable plots at the highest level of chemical fertilization. In polifactorial rape research sowing of 24th August 2007 of 2007/2008 was the most optimal in point of the amount of yield. This is most-significant in the case of loosening tillage and disking tillage plots, while the plots of ploughing lag behind those two in point of average yield. We experienced the biggest differences of yield in the case of different tillage plots of sowing on 24t August 2007. Still not even the plot with the highest average reached the limit of 4 tons, which can be attributed to high rate of lodging and the harvest loss caused by this. The biggest amount of yield was experienced in the case of sowing of 24th August 2007, with the highest level of chemical fertilization at loosening tillage plot (3930 kg/ha). We can observe big differences between the tillage methods; plots of loosening show a much better average yield then plots of disking and ploughing tillage. Considering the first observed crop year we can state that alternative tillage methods do have a future in rape growing of Hungary.
-
Effects of combined nutrient supply treatments on some physiological parameters of autumn wheat
241-251Views:153The Fleischmann Rudolf Research Institute in Kompolt is not only famous for plant breeding but the institute also surveys the effects of different nutrient supply methods since 1918. In 2017, we joined this research supported by EFOP 3.6.1 project. Our aim was to investigate photochemical processes – which is one of the most determinant in case of yield – of crops by in vivo field measurements. We measured the chlorophyll content of leaves using Minolta SPAD 502. We used miniPAM fluorometer to determine actual photochemical efficiency and non-photochemical quenching of PSII during natural light conditions and also to evaluate the pigment (chlorophylls and carotenoids) and water content of leaves we applied field spectrophotometer (ASD FieldSpecPro 3). We utilized these methods by various treatments (1. treatment with soil bacteria + head and base fertilizer; 2. treated by only head fertilizer; 3. treated by only base-fertilizer) in field experiment of autumn wheat (4.1–2.43–1.19 ha) in June, 2017. The difference between treatments was clearly detectable. In the case of the first treatment, physiological processes were more intense and the ripening occurred earlier. The obtained yield was the highest in the case of the area treated by soil bacterial. Based on the results, the first treatment can be recommended in practice.
-
Organic soybean production in Hungary
45-52Views:215Organic soy production, particularly for feedstuff in organic animal husbandry, is needed in Hungary and the EU regions. Soybean producing crop area in Hungary has increased in the last years, however, the agroecological potential would allow for a larger soybean production area. This study presents the soybean market in Hungary, and the role of soybeans in protein supply in food and feed, summarising the critical elements of organic soybean production from variety selection to marketing. During the field research, the effects of the agronomical environment on yield potential factors were examined. We aimed to determine how different row spacing and tillage systems affect organic soybean yields of different varieties, with particular attention to the dry region, and determine the specific methods and varieties of soybean that favour these areas. We found that the tillage (plough/grubber), the spacing (wide/narrow), and the variety effects were all significant on morphological variables. The most remarkable difference was seen in plant height and the number of pods per plant, while the number of nodes was also highly impacted by tillage treatment and variety. The nutrition variables were significantly different, mainly as an effect of tillage and spacing interaction with significantly different plant responses of varieties.
-
Water relations composition among Egyptian cotton genotypes under water deficit
5-15Views:199Background: water shortage is one of the major factor effects on growth characters and yield of most crops. Objective: this study was conducted to get to know the reactions of some Egyptian cotton genotypes to water deficit. Methods: The genetic materials used in this study included thirteen cotton genotypes belonging to Gossypium barbadense L., from the Cotton Research Institute (CRI), which was devoted to establishing the experimental materials for this investigation. Results: the ratio of GCA/SCA was less than unity for all studied indices, indicating predominance of non-additive gene action (dominance and epistasis), which is an important in exploitation of heterosis through hybrid breeding. Results: The data showed significant reduction in water relationship characters for all parental genotypes under stress conditions. The Egyptian variety Giza 68 gave high values for most water relationship characters. Data revealed that the greater the value of tolerance index is, the larger the yield reduction is under water deficit conditions and the higher the stress sensitivity is becoming. The parental genotypes Giza 96 showed the highest reduction in yield under water deficit conditions. At the same time, the cross combination Minufy x Australy showed higher values of yield reduction followed by the combinations Giza 67 x Australy. Of the male parents, the Russian genotype 10229 recorded the best GCA values for most water relationship characters. At the same time, the female parents, the old Egyptian genotype Giza 67 recorded the best values and exhibited good general combined for most water relationship characters. The cross combinations Giza 86 x Pima S6, Giza 77 x Pima S6, Giza 94 x Dandra and Giza 96 x Australy showed significant desirable SCA effect for most characters. Conclusion: relative water content %, osmotic pressure, chlorophyll and carotenoids content indicates better availability of water in the cell, which increases the photosynthetic rate. Also, the higher level of proline accumulation in the leaves which was recorded under deficit water suggests that the production of proline is probably a common response of plant under water deficit conditions.
-
Long-term effect of soil management on the carbon-dioxide emission of the soil
515-527Views:135CO2 emission from soils is one of the most important elements of the global carbon cycle, thus it has crucial rule in climate change. Each soil cultivation operation intervenes in the microbiological life of the soil, hence tillage is a factor through that the processes taking place in soil can be controlled. During the last decades, the organic material content of agricultural soils decreased to the half due to the intensive management resulting in the degradation of natural soil fertility. While intensive, plough-based tillage can cause soil degradation and erosion, the physical, chemical and biological status of the soil can be significantly improved through the application of conservation tillage methods. The results of long-term experiments prove that soil protective tillage enhances the enrichment of organic matter in the top layer of the soil. In order to reveal the role of tillage systems in CO2 emission from the soil, regular measurements were carried out in the plots with conventional and reduced tillage of the soil cultivation experiment of Research Institute of Karcag. Anagas CD 98 and Gas Alert Micro 5w infrared gas analysers were used to measure CO2-concentrations, and a specially developed method (consisting of a frame and a bowl) was applied to delimitate the measuring area. Most of the measurements were done on stubbles after harvest in order to exclude root respiration. The weather conditions of the examined 10 years were very changeable providing a good chance to compare them to each other. We found the tillage operations resulting in higher emission values in both tillage systems. On stubbles higher and more even emission was characteristic to reduced tillage due to the lower degree of soil disturbance and higher soil moisture content.
-
The examination of presumed Escherichia coli count of raw milk samples on several milk production farms
31-37Views:173For dairy farms, it is of great importance to insure the appropriate hygienic status of milk and to examine it regularly. Escherichia coli, belonging to the coliform bacteria type of, is a good indicator of contamination, and therefore suitable for characterising the hygienic condition of milk production.
The aim of our research was to examine the connection between the Escherichi coli count in bulk tank milk and housing and milking technologies of different-sizes farms. We examined the relation using various statistical methods.
Analysing the connection between the E. coli count and the farm size we found no significant difference between the farms. On the basis of the mean values of the E. coli count, we can say that the hygienic conditions are appropriate for mid-sized farms, and tolerable for large farms. We found differences in the hygienic status among the small farms. Half of the eight small farms, had no adequate hygiene. The results of the analysis of the quality categories show that the probability of inadequate quality milk was the largest on small farms (37.5%).
Comparing the various housing and milking methods with each other, there were numerical differences in the E. coli count, but these differences were not significant. We got higher E. coli count values on those farms using tied stall barn and bucket milking installation. The reason for this could be that in cases of farms using bucket milking installation, it is harder to meet the requirements.
After forming groups by farm size, housing and milking methods, we found that the E. coli counts are adequate on mid-size farms using various housing and milking methods; and tolerable on those large farms using loose housing stable and a milking parlour. At the same time, we found inadequate E. coli counts on the smaller farms using tied stall barns and bucket milking installation.
The results show that if there is suitable attention, independent of farm size, housing and milking procedure, it is possible to produce milk with low E. coli counts, and to insure appropriate hygienic conditions.
Further detailed examinations are needed to decide which factors of housing and milking technologies influence the E. coli count of bulk tank milk. -
Evaluation of reduced tillage technologies in corn production based on soil and crop analyses
47-54Views:177Despite new cultivation methods, the proportion of conventionally cultivated land is still very high in Hungary.
Although these technologies demand more time, labour and fuel, they are still attractive to users because they require less professional skill and simple machinery. In Hungary, conventional tillage methods usually lead to soil deterioration, soil compaction and a decrease in organic content. These side effects have caused gradually strengthening economic and environmental problems.
The technologies for those plants which are dominant on Hungarian arable lands use (winter wheat, maize, sunflower and barley) need to be improved both in the interest of environmental protection and the reduction of cultivation costs.
The Department of Land Use at Debrecen University is cooperating with KITE Sc. to carry out soil tillage experiments at two pilot locations to prove tillage technologies already used in the USA.
The aim of our examination is to adapt new technological developments and machinery, and to improve them on Hungarian soil for local environmental conditions. With these improved machines, the field growing of plants could be executed by less manipulation and better suited to economic and environmental needs. The most significant task is to investigate and improve the conventional cultivation replacing, new soil-protecting tillage technologies, and to apply no-till and mulch tillage systems.
On the basis of the experiments’ survey data, we established that the looseness and moisture content of the soil using reduced tillage is more favourable than after using conventional technologies. The results of no-till and shallow spring tillage are behind those of winter plough or disk ripper cultivation in corn yield and production elements.
To preserve moisture content in the soil, the ground clearing and sowing while simultaneously performing no-till method presents the most favourable results. The surplus moisture gained using no-till technology is equal to 40 mm precipitation.
Regarding the yield of winter wheat we established that the tillage methods do not affect plant yield. Both disk ripper and conventional disc cultivation showed nearly the same harvest results (5.55 or 5.5 t/ha), where the difference is statistically hardly verifiable from the no-till method. From the individual production of corn and the number of plants planted in unit area, calculated results prove that no significant difference can be detected between the production of winter plough and disk ripper technology. Although the yield achieved with the no-till method is less than with the previously mentioned technologies, the difference is only 9-10%. We received the lowest production at shallow spring tillage.
Evaluations have shown a 1.1 t/ha (13%) difference in the yield of maize, between winter tillage and the disk ripper method, in this case the traditional method resulted in higher yield. In winter tillage, the yield of maize was 1.9-2.1 t/ha (23-25%) higher than in the case of direct sowing and cultivator treatments. No significant difference could be noted between the yields of direct sowing and cultivator treatments.
Our research so far has proved the industrial application of reduced tillage methods in crop cultivation technologies. -
Methods for the examination of the role of the time factor in managerial and organizational processes
24-32Views:76managerial efficiency. The system of investigations is in accordance with the method elaborated and applied by the Department of Management Science of UD, CAS, Faculty of Agricultural Economics and Rural Development (Berde, 2003). This method involves questionnaire interviews and corporate data collection. The first part of the questionnaire contains data with respect to the company, while the second part focuses on the manager being interviewed. The third part is a closed, directed interview-based preference assessment. I aim to assess the sample at my disposal in order to test the research model.
In the course of the assessment of questionnaires, I apply descriptive statistical methods for the assessment of the personal and professional features of the managers interviewed and the characteristics of the companies. In the case of questions substantively concerning the time factor – resource, managerial function, reaction time, and impact assessments – I carry out hypothesis testing. I draw up a zero hypothesis, whose appropriateness I test by means of statistical methods. I usually apply rank correlation for the evaluation of the relationship between the variables measured on an ordinal scale in my investigations. This can be applied if not the exact values of the given variables, but only their order in one respect or another is known. If the group building criterion is two-variable Mann-Whimey, if a multi-variable Kruskal-Wallis trial can be applied, which, after the rank transformation, gives information about the acceptance or refusal of the Ho hypothesis through the average of the ranks. The model also contains the managers’ evaluation of the time factor in management work. -
Measuring methods of the efficiency of university technology transfer
21-29Views:136Nowadays, the socio-economic role and function of universities as well as their relationship with the industry, are more than ever in the focus of both the political and the academic spheres. The importance of knowledge and technology transfer is increasingly stressed in various economic development plans and strategies. The increased interest is due to the fact that universities are located at the crossroads of education, research and innovation, which might be crucial for the country's economic competitiveness. The commercialization of university research results is a well-defined task of technology transfer offices. Measuring the efficiency and successfulness of such offices is a difficult, but not impossible task. The present article aims to analyze the existing literature on measuring the efficiency of technology transfer activities and to introduce the most commonly used measuring methods of effective technology transfer. The article attempts to answer the question how to measure the efficiency of technology transfer by reviewing the available international literature and by analyzing secondary data.
-
The online marketing possibilities and judgment of the domestic food-sector
77-84Views:229The theme of my PhD research is the online marketing possibilities and judgment of the domestic food-sector. This article is based on the important bibliography of my research theme. I show the new categorization of the tools of marketing communication. I examine the recent years’ changes of the social approach and the interactivity. Based on the meeting of the Internet I separate our ages’ generations. Furthermore I examine the transformation of consumers into users in the digital environment. I prove the changes of the Internet’s penetration and the presence of enterprises in the Internet with statistic data. I touch the tendency of information searching in online environment. I present new methods to measure the online marketing activities’ return.
Finally, I define my objectives of research based on my own experience and bibliography overview over and above I draw up my concrete future’s research which I separate seconder and primer section.
-
Management of phytopathogens by application of green nanobiotechnology: Emerging trends and challenges
15-22Views:325Nanotechnology is highly interdisciplinary and important research area in modern science. The use of nanomaterials offer major advantages due to their unique size, shape and significantly improved physical, chemical, biological and antimicrobial properties. Physicochemical and antimicrobial properties of metal nanoparticles have received much attention of researchers. There are different methods i.e. chemical, physical and biological for synthesis of nanoparticles. Chemical and physical methods have some limitations, and therefore, biological methods are needed to develop environment-friendly synthesis of nanoparticles. Moreover, biological method for the production of nanoparticles is simpler than chemical method as biological agents secrete large amount of enzymes, which reduce metals and can be responsible for the synthesis and capping on nanoparticles.
Biological systems for nanoparticle synthesis include plants, fungi, bacteria, yeasts, and actinomycetes. Many plant species including Opuntia ficus-indica, Azardirachta indica, Lawsonia inermis, Triticum aestivum, Hydrilla verticillata, Citrus medica, Catharanthus roseus, Avena sativa, etc., bacteria, such as Bacillus subtilis, Sulfate-Reducing Bacteria, Pseudomonas stutzeri, Lactobacillus sp., Klebsiella aerogenes, Torulopsis sp., and fungi, like Fusarium spp. Aspergillus spp., Verticillium spp., Saccharomyces cerevisae MKY3, Phoma spp. etc. have been exploited for the synthesis of different nanoparticles. Among all biological systems, fungi have been found to be more efficient system for synthesis of metal nanoparticles as they are easy to grow, produce more biomass and secret many enzymes. We proposed the term myconanotechnology (myco = fungi, nanotechnology = the creation and exploitation of materials in the size range of 1–100 nm). Myconanotechnology is the interface between mycology and nanotechnology, and is an exciting new applied interdisciplinary science that may have considerable potential, partly due to the wide range and diversity of fungi.
Nanotechnology is the promising tool to improve agricultural productivity though delivery of genes and drug molecules to target sites at cellular levels, genetic improvement, and nano-array based gene-technologies for gene expressions in plants and also use of nanoparticles-based gene transfer for breeding of varieties resistant to different pathogens and pests. The nanoparticles like copper (Cu), silver (Ag), titanium (Ti) and chitosan have shown their potential as novel antimicrobials for the management of pathogenic microorganisms affecting agricultural crops. Different experiments confirmed that fungal hyphae and conidial germination of pathogenic fungi are significantly inhibited by copper nanoparticles. The nanotechnologies can be used for the disease detection and also for its management. The progress in development of nano-herbicides, nano-fungicides and nano-pesticides will open up new avenues in the field of management of plant pathogens. The use of different nanoparticles in agriculture will increase productivity of crop. It is the necessity of time to use nanotechnology in agriculture with extensive experimental trials. However, there are challenges particularly the toxicity, which is not a big issue as compared to fungicides and pesticides.
-
The Effect of Utilization Systems on the Sward Composition, Yield and Sheep Carrying Capacity of Extensive Grasslands
16-18Views:102We analysed the effect of the sheep grazing, the grass cutting and mixed utilization methods on plant composition, yield and live-stock keeping capacity of extensive Achilleo-Festucetum pseudovinae grassland in the 1996-2000 research period. Analysing the extensive utilizations effects on chanching of the plant composition of extensive grassland established that due to the cutting utilization method the area covering rates of gramineous and usefull weeds were the highest while the grazing utilization-method caused the briggest area covering rate for legumes and unusefull weeds. Analysing the utilized fibrin-fodder yield established that the single utilization methods could not produce the maximum yield and live-stock keeping capacity on the treathea grassland type. Because of things mentioned above we must use the mixed utilization methods to save the maximum phytomass.
-
New methods of compost homogeneity determination in sewage sludge based compost prisms
49-52Views:183There is no effective method of homogeneity measurement of compost prism. The most frequently used technology is the examination of the particle distribution. This method needs a lot of time and large number of samples. The aim of our research is establishing different effective methods to determine the homogeneity of compost prisms. During our work, we examined the homogeneity of a prism made of sewage sludge and saw-dust mixture.
The measurements were based on the different properties of raw materials. According to this we examined the homogeneity by moisture content, heavy metal content and gas distribution measurements.
The most effective method is the measurement of gasconcentration. Although gas-concentration measurements it need special equipment it has more advantages than the other methods. The examination of gas-distribution compensates the problem of sampling because the measurement is direct. It provides the opportunity to estimate the amount of emitted toxic gases and to determine the maturity of the compost and the effectiveness of the degradation. -
Comparison of supplier quality assurance methods for compound feed manufacturing from efficiency, product consistency and economical point of view
29-34Views:126Feed manufacturing and human food production are the main routes of use for agricultural products. The food industryparticularly has intensively implemented the recent quality management principles and developed systems that facilitate the continuous improvement and efficiency of the industrial production. Feed production has taken similar approaches however the intensity of deployment at the manufacturer and the rollout towards its supply chain has shown slower progress. The methods, that the feed manufacturer manages the supplier chain of mainly primer agricultural products according to, have a certain impact on the efficiency of the inbound operations, feed product quality and its consistency as well as on other resources. These methods have been built on sound quality management principles that are stated not only in quality standards but also in relevant regulations. Current study addresses the questions related to the link between supply chain quality management and feed product. The objective of the frontier research was to highlight the theoretical possibilities and benefits of the robust design methodimplemented into animal feed manufacturing dealing with highly variable ingredients.
-
Application of semen evaluation techniques
5-11Views:232Laboratory methods of semen evaluation are used to select males for artificial insemination. The current review describes several techniques that have been recently used for sperm analysis. Conventional microscopic methods in combination with the objective computerassisted sperm motility and morphology analyzers and flow cytometry, allows to obtain more precise information about the membrane and functional status of spermatozoa. By using several methods to detect motility, viability, acrosomal and capacitation status besides DNA integrity sperm biology and some of the mechanism involved in sperm cry injury can be better understood. The number of possible targets related to sperm quality is increasing, and possible that some of them could enable sperm analysis for predicting freezability and fertility to be improved.
-
The role of animal breeding with special regard to native pigs of food supply and rural development in Laos
149-154Views:267The present paper explored the influence of breeding native pigs on livelihood conditions and the contribution of native pigs to the rural development and rural poverty reduction in the rural areas of Lao PDR. Pig production plays an important role in meat supply for both urban and rural areas of Laos. It is clear that most of the pig products in the country come from smallholder pig farms, and more than 90 percent of those products are the native pigs mostly raised by farmers in remote areas. In general, livestock production distributed between 15–18 percent to GDP, while most of animal production still remains as the traditional methods. Rural development is always the first priority of the Laos government since its independence in 1975, however, the poverty rate in rural areas remained high at 23% in 2018. It might block the development goal of the government which will lead the country out of the least development status by 2020. The food security and malnutrition in the rural or mountainous areas are considered as the majority issue that both government and several international organizations have been thriving hard to overcome, which researchers showed that more than 45% of children under 5 years of age were stunted, and 28% of them were underweight. Inspired of more than 50 % of the households in the rural areas of Laos reported they consumed chicken and pork at least one day a week. While native pigs play an important role on meat supply, it also constituted around 9–14 % of annual income of the households in rural areas. Therefore, the increase the production of pigs and poultry is one option to promote the meat supply to households in the rural areas of Laos. This paper will be a pathway to guide and identify for the final decision to what experiment will be implemented on Lao native pig in Laos (2021–2023) to complete the comparative study on reproductive physiology and reproductive management methods of Hungarian and Lao Indigenous pig breed. Which found it still needs further afford to research and improve more about native pig performance for all areas of productive and quality management.
-
Congruency Analyses in Agricultural Organizations
56-61Views:82Management is one of the ancient activities. Managerial behaviour helped humans to become sociable creatures. The aims and roles of management have continually changed along with social and economic changes. Some management theories in the early literature interpret the managerial function as „to instruct” and „to control” subordinates. The manager – having the appropriate authority – unilaterally appoints the expected activities in accordance with the objectives of the organization and his/her own wish. Its form is the instruction or the command.
Later, organizations and management theories defined the managerial function rather as the impact on the employees than (or instead of) a unilateral manifestation of will. These focus on collaboration and imitation instead of on obedience. These theories were based on the fact that the employees work hard to succeed in meeting organizational goals because they want to meet their own needs, desires and wishes.
Today, management means being in a relationship with colleagues, effective and successful working methods and, last but not least, commitment and liability for the company. The responsibilities of directors are to estimate the employees’ competences and to apply the workforce expediently.
In our opinion, the two most important questions of human resource management (HRM) will be:
• the expectations made of the manager by the subordinates,
• the expectations made of the subordinates by the manager.
The expectations of management have continuously evolved along with the social, political and economical improvement. We consider the most important requirements will be the following:
• the exploitation of employees’ abilities (especially the leaders’),
• the exploitation of human resource,
• aim-oriented leadership related to different management levels.
The actual research covers only the examination of managerial requirements. We experienced that the expectations are affected by many factors starting with the fulfillment of a specific task to the social environment as a whole. Managements of the last century did not require such self-reliance, creativity and broad knowledge from their subordinates as they do today. Employees have to be able to adapt to new tasks, technology and methods; have to react quickly against the problems; and be loyal to the company and the manager.
We plan to expand our research backwards as well, in which we will search for the answer what kind of expectations are formulated by subordinates on the manager. Thus, we can approach and reveal the expectations (the examined factors) from two sides.
Due to this method, we would like to work out such coherences which can help us to demonstrate the opinions of the differently qualified employees of the organisations. The applied method provides us facilities to carry it out in various organisational parameters, such as functional form, size, effectiveness, range of activity. -
Advancement of a Common Wheat (Triticum aestivum L.) Selection System
8-11Views:99All the research in Hungary and other countries in Europe focus on improving the quality of crops and increasing the competitiveness of production.
In this respect, we have to advance the conventional technological elements, reduce the application of pesticides and fertilizers, and produce new varieties suitable for environmentally-sound production. In our crop breeding programs, we applied conventional and biotechnological methods (embryo rescue and double haploid methods) in order to get somaclonal and gametoclonal variations.
We produced winter wheat lines (HP-31-95, HP-82-96) by traditional way, which have high baking qualities and high nutrient efficiency. Some diseases can limit the quantity and quality of a wheat crop. We examined several wheat diseases in our winter wheat candidates, and we found that our progenies have resistance to leaf rust.
With respect to a serious problem was the small quantity of applied fertilizers and the other externals, our research focused onto advance a common wheat selection system, with the help of it, we can handle these problems. We have summarized that our selected progenies can compete with the registered varieties with quality and environmental respect.