Search
Search Results
-
Allelopathic effects of water extracts of pieces of wooly cupgrass (Eriochloa villosa) on the seedlings of field crops
167-170Views:443In Hungary, the woolly cupgrass (Eriochloa villosa [Thunb.] Kunth) endanger row crops (i.e. corn, sunflower). Its fast spreading based on some reason viz. long-lasting emergence, reduced sensitivity to many kinds of herbicides, vigorous competitional ability and fast initial growth. Allelopathy, ability of many plant species to produce one or more biochemicals wgich is used tocompete with each others. In this experiment we examined, whether the woolly cupgrass possesses allelopathy, and if so, how influences on the development of cultured crops like maize, sunflower and lettuce.
-
Analysis of the plant physiological effects of late, artificial corn smut infestation using remote sensing methods
31-35Views:469In Hungary, corn is also infected by several important pathogens. In this experiment, we analysed the plant physiological effects of artificial late cron smut infestation using remote sensing methods under field conditions We examined the experimental area from which the data comes from with a DJI Phantom 4 Multispectral Drone NDVI and NDRE indices were calculated and analyzed in GIS programs. Individuals treated with a higher dose remained much greener than the untreated control. They also showed significant differences within the indices used.
-
Development of seed analyses by means of various matrix solutions and the MALDI-TOF MS technique
53-57Views:807The earth's population is growing steadily, currently accounting for about 7.3 billion people. Population growth causes food demand to rise, approximately 36 million people die each year due to starvation or related diseases. One solution to this problem is the continuous examination and development of the agricultural economy. In this study, matrix-assisted laser desorption/ionization time-of-flight mass spectrometer (MALDI -TOF MS) were used to analyse of sunflower, soybean and hemp. In order to analyse the protein of maize, this method has already been applied. However, for sunflower, soy and hemp, it is necessary to develop a sample preparation method. Choosing the optimal matrix solution for ionization the traget molecule is an essential part of developing the method. Our aim is to compare two different matrix solutions (α-HCCA, SA matrix), based on the properties (intensity, noise ratio, value of spectra) of the spectra.
-
Examination of the Nutrient and Water Utilization of Different Corn Genotypes in the Hajdúság
55-59Views:234The research was set up on chernozem soil at the Látókép MÉK research area of the University of Debrecen in Hungary. We examined the following factors of the hybrid P9494, P9578, PR37N01 and PR37M81 in 2013.Yield, yield production per 1 kg fertilizer, water utilization and nutrient reaction. We found that the best yield results were achieved at level N120+PK in case of hybrid P9494 (17 132 kg ha-1) P9578 (16 838 kg ha-1) and PR37N01 (17 476 kg ha-1) and at level N150+PK for hybrid PR37M81 (16 754 kg ha-1). Results of yield per 1 kg NPK studies indicate that the most intense yield growth occurred at level N30+PK compared to the control treatment. This means that yield production per 1 kg NPK was 39.2 kg kg-1 in the case of hybrid P9494, 54.2 kg kg-1 in the case of P9578, 17.6 kg kg-1 for PR37N01 and 44.2 kg kg-1 in the case of PR37M81. After comparing corn hybrids’ water utilization, our conclusion was that the control treatment achieved the worst results in the case of each hybrid (P9494: 20.8 kg mm-1, P9578: 21.0 kg mm-1, PR37N01: 26.2 kg mm-1, PR37M81: 19.5 kg mm-1). For hybrid P9494, P9578 and P37N01, the best water utilization results were measured at level N120+PK (31.5 kg mm-1, 31,0 kg mm-1 and 32.1 kg mm-1), while PR37M81 reached the highest values at level N150+PK (30.8 kg mm-1). We determined the hybrids’ nutrient reaction and its optimum fertilizer values. The best nutrient reaction results were achieved by hybrid PR37N01, while that of hybrid PR37M81 proved to be the weakest.
-
Technological development of sustainable maize production and its effect on yield stability
379-388Views:380In 2015 and 2016, we examined the effect of NPK nutrients, sowing date and plant density on yield on typical meadow soil. The amount of precipitation was 282.0 mm in 2015 (January–September), 706.0 mm in 2016 and the 30-year averageis 445.8 mm.Agrotechnical factors:– Experiment a)5 Dow AgroSciences hybrid with three sowing dates and three plant densities– Experiment b)In 2015 eight, in 2016 ten hybrids with different genetic characteristics and growing seasons, with control (without fertilization), N80+PK and N160+PKtreatments, five plant densities (50–90 thousand) with 10 thousand plants difference between the different densities.
In a drought year, we reached the higher yield in the earlier sowing date and with the lower lower plant density of 70 thousand plants ha-1-. The maximum yield, depending on the agrotechnical factors, was 10–12 t ha-1 in 2015, while in 2016 it was 14–16 t ha-1. Yield stability can be increased using hybrid-specific cultivation techniques. -
Impact of precision irrigation on the unit income of maize production
157-162Views:320The study of the economic/economic impact of precision farming should be a priority area in digital agriculture, as the results, profitability, and efficiency indicators can have a significant decision-support effect on the development of both the agronomic and the technical regions of individual farms both in the longer and shorter term. Individual firms, companies, farmers, and family farms quantify the effectiveness of their farming processes. The modern age offers the possibility of digitally recording all the elements of farming technology, making it possible to analyse the cost-effectiveness of a farm more effectively and, in some cases, to carry out more detailed analyses. Nevertheless, the number of farms demonstrating their profitability with such precise economic calculations is still minimal.
Our analyses were conducted on a 56,02 ha field of Balogh Farm-Tépe Ltd. The agricultural operations carried out were fully documented so that the inputs (seeds, fertilisers, pesticides, crop enhancers) were recorded in coordinates and kind, as well as the specific yields, grain moisture data, irrigation norms, and irrigation rotations. At the same time, the company's owner provided the data's monetary value. The main econometric indicators (yield, production value, cost of production, income, cost price) related to the evaluation of the enterprise management were evaluated along with the spatial data in the irrigated and non-irrigated tables. Our calculations show that a given year's climatic and market characteristics fundamentally determine the cost and income relations of a plot of land (and thus of an entire farm). In addition to additional inputs, introducing some elements of precision farming and intensification and increasing yields improves yield security and allows for excellent yield stability.
-
Examination of the population density and sowing date of different maize genotypes in the Hajdúság region
111-115Views:449The experiment was carried out 6 km from Debrecen, next to the main road 47 on a homogeneous field on brown forest soil. Five corn hybrids were tested in the trial (DKC 4795, DKC 4995, KWS Kornelius, NK Cobalt, PR37 N01) at three different sowing times (early – 5th April, average – 21st April, late – 10th May). At each sowing time, three different plant densities were applied (modest – 58 500 plants ha-1, average –70 200 plants ha-1, high – 82 300 plants ha-1). The agrotechnics applied
in the experiment satisfied the requirements of modern corn cultivation.In the study, the best yield result was achieved with the early sowing time out of the three examined sowing times (11 315 kg ha-1), which was significantly different (LSD5%=495 kg) from that of the average sowing time (10 690 kg ha-1), however, there was no statistically justifiable difference between the yield results of the early and the late sowing times. There was a significant difference also between the average and late sowing time. Our results indicate that the different sowing times resulted in a different flowering times. Consequently, the stands of early and late sowing time reached this critical stadium of growth under proper climatic circumstances (precipitation: 39 mm and 136 mm, average temperature at flowering: 18.1 oC and 20.3 oC), while flowering in the case of the average sowing time of 21st April was in the first half of July and the average temperature at flowering was warmer (23.2 oC) with only 10 mm precipitation.
In the experiment, the plant density response was also examined. According to the measured data, four of the five hybrids responded badly to the increasing plant density. We found that the plant density of 58 500 plant ha-1 gave the largest yield results (DKC 4995 11 794 kg ha-1 – NK Cobalt 10 998 kg ha-1, average of five hybrids: 11 430 kg ha-1), while the lowest yields were obtained at the plant density of 82 300 plant ha-1 (KWS Kornelius 11 037 kg ha-1 – NK Cobalt 10 019 kg ha-1, average of five hybrids 10 720 kg ha-1). The difference between the two plant densities was significant (LSD5%=494 kg), however, the 70 200 plant ha-1 plant density did not show any statistical difference from neither the 58 500 ha-1 nor from the 82 300 plant ha-1 stands. When examining the data of the hybrids separately, we found that there was a significant difference between the average yield of the lowest and highest plant densities only in the case of three (DKC 4795, DKC 4995, NK
Cobalt) out of the five hybrids (DKC 4795: 11 757 kg ha-1 – 10 857 ha-1 where LSD5% =816 kg; DKC 4995: 11 794 kg ha-1 – 10 738 kg ha-1 where LSD5%=853kg; NK Cobalt: 10 998 kg ha-1 – 10 019 kg ha-1 where LSD5%=630 kg ha-1), while a significant difference between the second and third plant densities was observed only in one case (DKC 4995: 11 726 kg ha-1 – 10 738 ha-1 where LSD5%=853 kg). In all other cases, there was no statistical difference between the different
plant densities. -
Fusarium culmorum isolated from rhizosphere of wooly cupgrass (Eriochloa villosa) in Debrecen (East Hungary)
93-96Views:292Wooly cupgrass (Eriochloa villosa) is an East-Asian originated weed species and it has been spreaded worldwide by now. The first occurrence of this species in Hungary was observed and published in 2008 nearby Gesztely village (Borsod-Abaúj-Zemplén county, North-East Hungary) than in the summer of 2011 a significant population was discovered next to Debrecen city (Hajdú-Bihar county, East Hungary).
In 2013 this weed was also reported from Szentborbás village, Somogy county (South-West Hungary). These observations of spreading and its biological features (production of stolons and large number of seeds, moreover herbicide tolerance) indicate that wooly cupgrass (E. villosa) has a great potential of invasiveness, so it may become a hazardous weed not only in Hungary but in all over the world.
The objective of this study was to identify the fungus which was isolated from wooly cupgrass (E. villosa) root residue samples which were collected after maize harvesting on arable land in late autumn, near Debrecen. The identification of the fungus based on morphological characters of colonies and the features of conidia developed on potato dextrose agar (PDA) plates. After the examination of axenic culture we revealed that the fungus from rhizosphere of wooly cupgrass was Fusarium culmorum. Pathogenicity and/or endophytic relationship between the fungus and wooly cupgrass is still uncertain so pathogenicity tests and reisolations from plants are in progress.
-
The impact of fertilisation on a few microbiological parameters of the carbon cycle
45-50Views:485The 30 years old long-term experiment of Látókép is continued in our experiments. The long-term fertilization experiment was set in 1983, and our sample was taken in spring 2014. The examinations of soil respiration processes and factors that influence soil respiration are required in optimal management. In our study, we interested to know how the growing levels of fertilization influence the microbial processes under nonirrigated and irrigated conditions in maize mono, bi, and triculture. The experimental results and those statistics suggest that the bi and triculture influenced higher microbial activity which was reflected in number of fungus, soil respiration, and microbial biomass carbon (MBC).
-
Susceptibility of stem infected sweet corn hybrids to common smut disease
55-57Views:909The common smut of maize (corn smut, Ustilago maydis /DC/ Corda) can cause large economic losses in susceptible sweet corn hybrids as well. The protection against this pathogen is fundamentally based on prevention. Many methods to control corn smut have been recommended or evaluated, including crop rotation, sanitation, seed treatments, modification of fertility, and biological control. In spite of these frequently mentioned control strategies, the host resistance seems to be the only effective method to manage common smut in those areas where Ustilago maydis is prevalent.
-
Baking quality of winter wheat (Triticum aestivum L.) in the long-term experiments on chernozem soil
152-156Views:352Agriculture has traditionally an important role in Hungarian economy and rural development. About 75 % of Hungary’s total territory
is under agricultural land use. Because of ecological conditions and production traditions cereals (wheat, maize etc) have the greatest
importance in Hungarian crop production. In the 1980’s the country-average yields of wheat were about 5,0-5,5 t ha-1 („industrial-like”
crop production-model). In the 1990’s the yields of wheat dropped to 4,0 t ha-1 because of low input-using and wide application of the issues
of environmental protection and sustainability. Winter wheat production for quality has a decisive role in certain regions of Hungary
(eastern and middle-parts).
The quality of wheat is complex and different. Three major growing factor groups determine the quality of winter wheat: genotype,
agroecological conditions and agrotechnical factors. In wheat production for quality the selection of the variety is the most important
element. Our long-term experiments proved that the quality traits of a variety means the highest (maximum) limit of quality which could not
be exceeded in fact. During the vegetation period of wheat the different ecological and agrotechnical factors could help or on the contrary
could demage the quality parameters of wheat.
The agrotechnical factors determining the baking quality of wheat can be divided into two groups: the first group means the factors with
direct effects on quality (fertilization, irrigation, harvest); the second group contains the elements with indirect effects on quality (crop
rotation, tillage, planting, crop protection).
Appropriate fertilization could help to manifest the maximum of quality parameters of a wheat genotype and could reduce the qualityfluctuation
in unfavourable ecological and agrotechnical conditions. -
The role of the hybrid-specific technological recommendations of maize in precision crop production procedures
297-302Views:254The necessity of application of hybrid specific crop production technology has been confirmed not only by trial results but also by the experiences gained from the agricultural practice. For this reason it is essential to test and collect data in field trials about the specific agronomic traits of the corn hybrids belonging to different maturity groups and genotypes. Corn hybrids are tested for their responses to sowing time, plant density and fertilizer supply; sensitivity to herbicides; and lately, the resistance to the damages caused by the larvae of corn root worm. Last but not least, mention should be made of the differences in the responses of the corn hybrids to the damages caused by drought stress. Based on the trial results, suggestions for the hybrid specific corn production are compiled and made public for the experts and farmers engaged in corn growing. Corn hybrids may deliver maximum yields on the impact of specific crop production technology only in case if it relies on carefully done general production technology including soil cultivation, seed bed preparation and weed control. Similarly, precision crop production technology may advance the yield increase in economic way if it is constantly drawing on the source of research results.
-
Examination the effects of different herbicides on the soil microorganisms of a calcareous chernozem
121-126Views:220Pesticides play a key role in fighting weeds, pests and parasitic fungi. According to surveys, pests reduce the yield of agricultural crops by 35% worldwide. Pests, fungi and weeds account for 14%, 12% and 9% yield loss, respectively (Gáborjányi et al., 1995). Chemicals have contributed to increasing and maintaining the yields of crop production for decades. Today, agricultural production (in spite of many efforts) is unthinkable without the use of pesticides (herbicides, insecticides and fungicides). On the other hand, these chemicals contribute to the pollution of the atmosphere, surface and underground waters, and agricultural soils, especially if they are applied improperly.
The sustainable agricultural production pays attention to environment-friendly cultivation-technologies; but at the same time it makes an effort to produce good quality and economical products. The examination of the herbicides’ secondary effects, fits into this chain of idas namely, how the herbicides affect – stimulating or inhibiting – the soil microbiological processes, prevention of soil fertility.
In the course of the experimental work the effect of herbicides on soil biological properties were examined in different maize (Zea mays) cultures. We wanted wished to know that how the herbicides affect the quantity change of soil microorganisms, the life of different physiological groups of bacteria and the activity of microorganisms. A small pot experiment was set up in 2008 with the application of two herbicides - Acenit A 880 EC and Merlin 480 SC – in the breeding house of the Department. The moisture content and nutrient supply were at optimal level in the experiment.
On the basis of results the following can be stated:
1. It can be stated that the two herbicides and all their doses affected negatively the number of total soil bacteria, the
inhibiting effects were significant. The quantity of microscopical fungi increased by the effect of Merlin 480 SC and decreased in the treatments of Acenit A 880 EC.
2. The Acenit A 880 EC had stimulating effect on the nitrate mobilization. The CO2-production was stimulated by the basic doses of herbicides; the other treatments did not influence the CO2-production significantly.
3. The quantity of microbial biomass-carbon –except for only one treatment- decreased significantly by the effect of herbicides. Besides it, the quantity of microbial biomass-nitrogen increased significantly in the treatments of Acenit A 880 EC.
4. The biomass of test plant decreased in the treatments of herbicides, their quantities were smaller than in the control. In the pots treated by Merlin 480 SC, parallel with the increase of doses decreased the quantity of plant-biomass. -
Studies on the Fusarium stalk rot infection of the maize genotypes using the Findex percentage and a computerised image analysis program
45-51Views:248In a continental climate, the pathogens causing the most serious problems are species belonging to the Fusarium genus. When the pathogen attacks the stalk, the plant dies earlier, reducing grain filling and resulting in small, light ears. In addition, the stalks break or lodge, resulting in further yield losses from ears that cannot be harvested. During the three years of the experiment, 14 inbred lines were examined. The genotypes were sown in a two-factor split-plot design with four replications, with the genotypes in the main plots and four treatments in the subplots: two Fusarium graminearum isolates (1. FG36, 2. FGH4), 3. sterile kernels, 4. untreated control. The results experiments showed significant differences between the genotypes for resistance to fusarium stalk rot. Among the inbred lines the best resistance to fusarium stalk rot was exhibited by P06 and P07, both of which were related to ISSS. The precision and sensitivity of disease evaluations carried out visually and using image analysis software were compared in the experiment, and with two exceptions the CV values were lower for the image analysis. As the CV for measurements can be considered as a relative error, it can be stated that image analysis is the more precise of the two methods, so this technique gives a more accurate picture of the extent of stalk rot. The extent of stalk rot developing in response to natural infection is extremely environment-dependent, so the use of artificial inoculation is recommended for selection trials.
-
Production of corn in Serbia in the light of climate change
305-322Views:342This paper presents the basic elements of maize production technology in Serbia. For their good knowledge, it is necessary to be familiar with the basic biological requirements of the species, phenology and its particular requirements for water, heat, soil conditions and mineral nutrition. A special emphasis in this paper is given to recent research by the author regarding the correction of production technology (selection of hybrids, time and density of sowing, etc.) from the aspect of knowing the weather conditions of the year to the moment of sowing and the amount and position of available nitrogen in the soil profile during the spring before sowing. In the light of predicted climate change conditions for the Republic of Serbia, the authors of this paper have proposed and appropriated adaptation measures. The general conclusion is that there are no general recipes for the correct production technology of this plant species, but should be adapted to each specific year, field and hybrid.
-
Genetic progress in winter wheat quality and quantity parameters
71-75Views:402Wheat production is significant branch of Hungarian crop production (with about 1 million hectares of sowing area). Weather anomalies resulted by climate change have increased the importance of biological basis in wheat production. Yield quality and quantity parameters of three wheat genotypes sown on chernozem soil type after maize pre-crop were studied in a long-term field experiment. Yield amount of the studied genotypes varied between 2894 and 8074 kg ha-1 in 2017 and between 5795 and 9547 kg ha-1 in 2018 depending on the applied treatments. Based on our results it can be stated that in both studied crop years the highest yield increment was realized by the application of the nutrient supply level of N30+PK. As the result of the application of the optimum mineral fertilizer level – in contrast to the control – resulted in significant yield increment in both crop years. The results of the long-term field experiment prove that water utilization of the studied wheat varieties / hybrids was improved by the application of the optimal nutrient supply. Furthermore, the water utilization of the latest genotypes was more favorable by both the control and the optimum nutrient supply level treatments. Analyzing the quality parameters of winter wheat using the NIR method it has been stated that the quality results of the well-known genotype (GK Öthalom) were better than those of the new genotypes. A negative correlation between winter wheat quality and quantity parameters has also been confirmed. As the result of the mineral fertilizer application protein and gluten content of winter wheat increased to a significant extent.
-
Name Brands and Symbols Used Organic Products in the European Union and in Hungary
174-180Views:222In 2002, the area which was monitored according to the requirements of organic farming numbered 103 thousand hectares in Hungary (this is some 1.7% of all cultivated land) and almost 1000 plants producing organic products were inspected. It is a realistic assumption, when considering these data, that within a short period time the area used for organic farming will reach the optimal 600.000 hectares.
Contrary to overproduction in the EU – cereals, maize and other plants – organic products can be sold in unlimited quantities. Practice also indicates, that 90% of Hungarian certified organic products are sold in EU and Swiss markets.
Thus, it is important to label Hungarian products according to EU standards. This way standard quality products can be sold easier and by increasing their income, manufacturers can contribute to the improvement of the environment. -
The role of green manure crops in Hungarian plant production
49-53Views:568According to the data of KSH (Hungarian Central Statistical Office), the sowing area of cereals in the crop year 2016 was over 2.56 million ha, on which winter wheat and maize were produced in a rate of around 50–50%. Regarding these data it is obvious that the domestic cropping structure has been simplified and become unilateral. This unfavourable crop rotation system causes several problems. The number of Hungarian livestock decreased in the past decades. The amount of manure was 24 million tons in 1960, but only hardly 4.5 million tons of organic manure was applied in 2016. Therefore, the importance of other possibilities, alternatives for organic matter recovery have become enhanced. This is especially important from the aspect of sustainable plant production. The fact that the European Union has introduced new directives for subsidiaries in 2015 has to be noted as well.
The objective of the set experiment is to find new technological solutions that are suitable for the execution of sustainable plant production by inadequate crop rotation, organic substance recovery conditions or under more unfavourable climatic conditions.
-
Role of living bacteria and other amendment in early development of maize
53-56Views:261Different bacteria and wood ash, as a possible micro-nutrient, and liming material, was examined in our experiment on the early growth of corn seedlings.
The development of renewing energy resources includes the use of energy grasses and energy forests. The intensive land use in forestry and in agriculture may cause the acidification of soils due to the harvest, or leaching of cations. To maintain the sustainability of soils necessary to maintain it’s the buffer capacity, and pH. Beside the lime the wood ash can is one of the most effective sources to provide the sustainability of intensive land use. The soil born micro organisms play a significant role in the maintenance of soil quality. The bio fertilizer, that contains soil originated bacteria (Azotobacter, and Bacillus sp.), was used in the experiments. The plants release several organic acids by their roots lowering the soil pH, and make more available the sparingly soluble minerals. The amounts of released organic matter depend on stress intensity, as the high pH is. The soil life has a significant role to keep the soil conditions on sustainable level, since there are several similarities in nutrient uptake mechanism between the bacteria and higher plants. Advantageous effects of bio-fertilizer were observed in our experiments.
We came to the conclusion that the use of wood ash is recommended instead of lime for the improvement of acidic soils, on the evidence of its pH increasing effect. The wood ash contains several micronutrients in an optimum composition for forestry and agricultural plants. The solubility of heavy metals is very low; therefore there is no risk to use the wood ash in the agriculture and in the horticulture by our experiments. The retardation of growth at higher ash doses can be explained by the modification effect to the soil pH, as far as the original soil pH was pH 6.8, and when ash was given to the soil, the pH increases to 7.8 pH, that is unfavourable for the uptake of most nutrients.
-
Economic questions of precision maize production on chernozem soil
293-296Views:256It is one of the main topical objective to establish the conditions of sustainable farming. The sustainable development in crop production also calls for the harmony of satisfying human needs and providing the protection of environmental and natural resources; therefore, the maximum consideratio of production site endowments, the common implementation of production needs and environmental protection aims, the minimum load on the environment and economicalness. Precision farmin encompasses the farming method which is adjusted to the given production site, the changing technology in a given plot, the integrated crop protection, cutting edge technologies, remote sensing, GIS, geostatistics, the change
of the mechanisation of crop production, and the application of information technology novelties in crop production. Modern technology increases efficiency and reduces costs. The efficiency of crop production increases by reducing losses and the farmer has access to a better decision support information technology system. In addition, we consider it necessary to examine the two currently most important economic issues: “is it worth it?” and “how much does it cost?”. During the analysis of agricultural technologies, we used the precision crop production experiment database of KITE Zrt. and the Institute for Land Utilisation, Regional Development and Technology of the Centre for Agricultural and Applied Economic Sciences of the University of Debrecen.
During our analytical work, we examined three technological alternatives on two soil types (chernozem and meadow). The first technology is the currently used autumn ploughing cultivation. We extended our analyses to the economic evaluation of satellite navigationassisted ploughing and strip till systems which prefer moisture saving. On chernozem soil, of the satellite-based technological alternatives, the autumn ploughing cultivation provided higher income than strip till. In years with average precipitation supply, we recommend the precision autumn ploughing technological alternative on chernozem soils in the future. On meadow soil, the strip till cultivation technology has more favourable economical results than the autumn ploughing. On soils with high plasticity – considering the high time and energy demand of cultivation and the short amoung of time available for cultivation – we recommend to use strip till technologies. -
Development of technology elements for growing of perennial sorghum
15-17Views:225Optimal sowing time for perennial sorghum under irrigation is when soil temperature at the depth of sowing reaches up to 10–11 °С, harvesting for the green mass has to be done when panicle is situated on the stem in 10 sm from the flag leaf and hight of cut must be 11 sm.
-
Data on the Orthoptera fauna of characteristic agricultural landscape in the Carpathian Lowland
25-34Views:405Orthoptera fauna and assemblages of natural and semi-natural grasslands of the Hungarian Lowland are well-known, however, little is known about assemblages living in agricultural and anthropogenic habitats such as arable lands, roadsides, hedges, and riverbanks. Due to climate change, intensification of agriculture, and change of habitat use, these habitat types become increasingly important.
To collect data on these mainly unknown habitat types, a three-year study was carried out on the Orthoptera fauna and assemblages of the firth region of the Tisza and Sajó rivers. This area was mainly unknown, and our research contributes to increasing knowledge and provides a base for further investigations.
In the 40 sampling sites of the studied region, an occurrence of 30 Orthoptera species was recorded based on 2241 sampled individuals. In this study, we provide 540 new distribution data records of orthopterans that means an almost eightfold increase of the known data. Orthoptera assemblages of different agricultural habitat types showed significant differences considering both species richness and composition. Data suggested that non-cultivated habitat patches of dirt-roads, roadsides and stubble fields and even extensively used pastures, hayfields and alfalfa, red clover, and even wheat fields can preserve relatively species-rich Orthoptera assemblages. Contrary weedy sites of these cultivars and intensively used arable lands (maize, sunflower and rape fields) showed extremely low species diversity.
-
The role and impact of N-Lock (N-stabilizer) to the utilization of N in the main arable crops
51-55Views:363The nitrogen stabilizer called N-Lock can be used primarily with solid and liquid urea, UAN and other liquid nitrogen, slurry and manure. In corn it can be applied incorporated before sowing or with row-cultivator or applied with postemergent timing in tank-mix. In postemergent timing need precipitation for long effect. In oil seed rape and autumn cereals the N-Lock should be applied with liquid nitrogen in tank mix late winter or early spring (February-March). The dose rate is 2.5 l/ha. N-Lock increases the yield of maize, winter oil seed rape, winter wheat and winter barley 5-20 %. The yield increasing can be given the thousand grain weight. In case of high doses of nitrogen it can be observed higher yield. The quality parameter also improved, especially the oil content of winter oil seed rape and protein and gluten contents of winter wheat. The use of N-Lock increases the nitrogen retention of soil and reduces nitrate leaching towards the groundwater and the greenhouse effect gas emissions into the atmosphere. The degradation of the applied nitrogen is slowing down and the plant can uptake more nitrogen in long period. The effect of N-Lock the nitrogen is located in the upper soil layer of 0-30 cm and increasing the ammonium nitrogen form. The product can be mixed with herbicide products in main arable crops.
-
Caliometric characterisation of crop production byproducts
55-58Views:254By the decreasing tendency of the fossil energy resources more emphasis put on the usage of renewable energy resources. The consideration of environmental protection and the efforts of the European Union make current the widespread usage of renewable energy within biomass energy. One of the determinative trends of biomass energy is the direct combustion of biomass. Characteristically woody stocks are produced for this aim, but there is a considerable potential in several byproducts of growing herbaceous plants or of other processes.
In our study three byproducts of plant production have been investigated which appeared at the harvest. The Higher Heating Values of wheat, maize and sunflower byproducts have been determined by an IKA C2000 Basic adiabatic calorimeter. According to the statistical analysis of the measured data the HHV of the byproducts are different, and these values are in a negative correlation with the amount of ash in % (R2=0.873) appeared by the combustion.
-
The Effect of Drought on the Yield of Winter Barley Lines in the Great Cumania Region
127-129Views:193Winter barley is the third most important fodder plant in Hungary after winter wheat and maize.
Its accommodation to the changing climatic conditions – mainly to drought in Great Cumania, the driest region of our country is of great importance from the point of view of plant breeding and growing.
The vegetation period of 2002/2003 can be considered to have been very droughty with 247.5 mm precipitation.
According to our results six- rowed barley lines have better drought tolerance than two-rowed lines. The average yields of the six-rowed barley lines were 12-25 per cent higher than the yields of the two rowed lines.
Due to the joint effect of delayed sowing and drought, significant yield depression was detected both in the case of the early and the medium maturity group, and assessable data could be gained only from 35 per cent of the total territory.