Search
Search Results
-
Competence modules of the agro-environmental engineering bachelor course in Hungary
229-236Views:314One of the most important goals of the Bologna Process is to introduce the three circle system: bachelor, master, doctorate courses. In Hungary from 2006/2007 academic year 132 bachelor courses are launched. One of the launched bachelor course is environmental engineering of which the scientific background and economical sector are rapidly changing. Hence, to help graduates from this area to find a job, it is very important to examine working activities, expectations of employers, to study requirements of the training programs, the system of competencies. Having examined these points, frameworks of professional requirements have been worked out by 27 validation tests. In this publication, the results of the research work related to the environmental engineering bachelor program were presented.
-
The effect of crop protection and agrotechnical factors on sunflower in the Hajdúság region
39-46Views:296Extreme weather conditions are becoming more and more frequent in the crop years, thus increase the risk of sunflower production.
The objective of researches into plant production is to minimize these effects as much as possible. In this sense, the optimization of
agrotechnological factors is of high importance. Within these factors, the appropriate crop technology (sowing time, crop density)
and optimized, rational crop protection technologies are important, especially in the highly sensitive sunflower cultures. The effect of
sowing time, crop density, and fungicide treatments on the yield of sunflower hybrids was analysed in different crop years in 2008
and 2009. In each case, the infection was highest with the early sowing time and at the highest crop density level (65000 ha-1). When
one fungicide treatment was applied, the rate of infection decreased compared to the control treatment. The further decrease of the
infection rate was less after the second fungicide treatment.
In the humid year of 2008 the crop yield was the highest at 45000 ha-1 crop density level in the control treatment and at 55000 crop
ha-1 crop density level when fungicides were applied. In the draughty year of 2009 the maximum yield was gained at 55000 ha-1 crop
density level in the control treatment and at 65000 crop ha-1 when fungicides were applied. In 2008 and 2009 as regards the crop
yield, the difference between the optimal and minimal crop density levels was higher in the fungicide treatments than in the control
treatment (in 2008: control: 517 kg ha-1; one application of fungicides: 865 kg ha-1; two applications of fungicides: 842 kg ha-1), (in
2009: control: 577 kg ha-1; one application of fungicides: 761 kg ha-1; two applications of fungicides: 905 kg ha-1).
In each and every case, the first treatment with fungicides was more effective than the second. In 2008, the highest yield was
obtained with the third, late sowing time in each fungicide treatment. The differences between the crop yields with different sowing
times was less than in 2009, when the results of the second treatment exceeded those of the first and third treatment in each case. -
Evaluation of the microbial soil quality indicators in agricultural soils from Crisurilor Plain
79-80Views:235The researches were carried out in 2010 and 2011 on the haplic luvisol cultivated in three variant such as: pasture, cropland, and orchards. Based on the total number of microorganisms monitored in the haplic luvisol (aerobic mesophilic heterotrophs, yeast and mould, Actinomycetes, nitrogen fixing bacteria and nitrifying bacteria) was calculated the bacterial indicators of soil quality (BISQ) and was appreciate the bacterial potential of the haplic luvisol. Seasonal analyses were carried out, and annual BISQs have been calculated too. The values of the bacterial indicators of the haplic luvisol in different cultivation conditions (pasture, cropland and orchards) indicate a high density of the bacterial groups in 2010 and 2011. In 2010 the values of the BISQs are included between 3.617 (minimum in autumn, in pasture) and 5.458 (maximum, in spring, in pasture). In 2011, the minimum value (3.622) was registered in pasture, in autumn, and the maximum value (4.851) in the haplic luvisol cultivated with maize, in spring. In 2010 and 2011, based on the bacterial indicators of the soil quality values, on the first position is the cropland (4.750, 4.721) followed by orchards (4.615, 3.985) and pasture (4.537, 3.758).
-
Effect of the media on morphology of Cryphonectria parasitica (Murr.) Barr isolates and their Vegetative Compatibility Groups
38-42Views:527The most dangerous pathogen for the European and American chestnuts is the blight fungus Cryphonectria parasitica (Murrill) Barr. Short after its introduction a big number of chestnut trees were destroyed on the infested area. The control could be really complicated, because of the numerous vegetative compatibility groups of the fungus. There is a type that carries a mycovirus viz. hypovirus in the cytoplasm. We are able to control effectively this pathogen by using mycovirus-carrying strains (called hypovirulent fungal strains also). In laboratory it is easy to multiply the virulent and the hypovirulent strains of the fungus but do not easy to differentiate colonies visually on simple PDA medium. During our research, we tested different types of media, based on potato and chestnut bark extract respectively. It was observed that on potato medium the virulent strains produce more orange pigments. So it is more easy to differentiate virulent or hypovirulent isolates of chestnut blight fungus based on colony colour and morphology.
-
Effect of sowing technology on the yield and harvest grain moisture content of maize (Zea mays L.) hybrids with different genotypes
17-22Views:290From the aspect of the efficiency of maize production harvest grain moisture content shall be considered beside the amount of harvested grain yield. Hybrids with different genotypes and vegetation period length lose their moisture content different that is affected by row spacing and plant density – among agrotechnical production factors – depending on the given crop year. In the present research work three crop years with different weather conditions were studied (2013, 2014, and 2015). The small-plot field experiment was set up at the Látókép Field Research Centre of the University of Debrecen, Centre for Agricultural Sciences with four replications on a chernozem soil type. The effect of three factors was analysed in the experiment on yield amount and its moisture content. Factors were row spacing (45 and 76 cm), plant density (50, 70 and 90 thousand plants ha-1), while hybrids were of very early (Sarolta: FAO 290), early (DKC 4014: FAO 320, P 9175: FAO 330, P 9494: FAO 390) and medium (SY Afinity: FAO 470) ripening.
In the crop year of 2013 the highest yield was produced – regarding the average of the hybrids – by the application of a row spacing of 45 cm (4.5%, 673 kg ha-1), however there was no significant difference between the yield of the populations of different row spacings. Significant difference (14.9%, 1751 kg ha-1; 6.3%, 583 kg ha-1) could be found in case of yield between different row spacing applications in 2014 and 2015. The effect of insufficiently distributed low amount of precipitation and lasting heat days in 2015 could be revealed in yield amounts and harvest grain yield moisture content results that were lower than in the previous years. In 2015 grain yield moisture content varied between 10.3 and 13.9% in case of a row spacing of 45 cm, while by 76 cm between 11.0 and 13.9%.
-
Nutrient Uptake of Miscanthus in vitro Cultures
23-24Views:290The large biomass production and the low necessary input fertilizer make Miscanthus an interesting, potential non-food crop with broad applications, e.g. for fuel and energy, for thatching, fiber production, for the paper and car industries, as well as for ethanol production.
Axillary buds of Miscanthus x giganteus were placed on a shoot inducing nutrient solution (modified Murashige and Skoog, 1962), basic medium supplemented with 0,3 mg l-1 6-Benzylaminopurin. After 40 days of culturing, the axillary buds produced three times more shoots than could normally be harvested. The nutrient content (N, P, K, Ca, Mg) was measured several times during culturing. The results showed that, after 35 days, nitrogen and phosphate were nearly completely taken up. From that time, shoot growth was not observed.
After shoot propagation, the plants were transfered into a nutrient solution for root formation (modified Murashige and Skoog, 1962), basic medium supplemented with 0,5 mg l-1 Indole- 3-Butyric acid, and could be potted in soil after about 14 days. -
The effect of different compost rates on the yield of ryegrass (Lolium perenne L.)
95-98Views:343Protection of natural resources and sustainable natural resources management are essential for the long-term survival of humanity. This makes necessary nowadays the development of environmentally conscious living and spread of that in the future. The amount of organic waste materials, produced during human activities, could be decreased by composting instead of dispose them in landfills. Applying appropriate treatment technology and additives, the compost could be used as fertilizer for horticultural crops and it could increase the easily available nutrient content of soils. Compost utilization prevents nutrient deficiencies and by using the optimal rate, we could reach significant yield increases.
-
Social justice as a factor in socio-economic preconditions effective process of economic transformation Ukraine
63-64Views:234The article deals with social justice as the main factor of social and economic prerequisites for effective transformation of the economy of Ukraine and basic ways of overcoming injustice in the social sphere of life.
-
Comparative study of a winter wheat variety and hybrid sown after different pre-crops on chernozem soil
63-69Views:549Wheat production is a determining branch within Hungarian crop production (produced on nearly one million hectares). Weather anomalies caused by climatic change confirmed the importance of the biological background (variety, hybrid) in wheat production. The adapting ability and reaction of different wheat genotypes towards nutrient supply were studied in a long-term field experiment on chernozem soil type in the case of different pre-crops (sunflower and maize). According to the experimental results of the vegetation of 2017/2018, the yield of the variety Ingenio sown after the sunflower as previous crop ranged between 4168 and 8734 kg ha-1, while in the case of maize as previous crop, this value ranged between 2084 and 7782kg ha-1, depending on the applied nutrient supply level. The studied genotypes produced rather significant yield surplus as a response to the application of mineral fertilization (4.6–5.1 t ha-1 after sunflower and 5.7–6.3 t ha-1 after maize). Optimal mineral fertilizer dosage was determined by both the genotype and the pre-crop. N-optimum values of wheat genotypes was determined using regression analysis. In the case of the variety Ingenio sown after sunflower, the optimum range was N144-150+PK, while after maize, it was
N123-150+PK, respectively. For the hybrid Hyland, these optimum ranges were N114-120+PK, just as N150-153+PK, resp. The application of optimal mineral fertilizer dosages improved water utilization of the studied wheat genotypes to a significant extent. WUE values of the control, unfertilized treatments ranged between 4.1–8.3 kg mm-1, while in optimal fertilizer treatment, it ranged between 15.5 and 17.4 kg mm-1. -
Measuring methods of the efficiency of university technology transfer
21-29Views:249Nowadays, the socio-economic role and function of universities as well as their relationship with the industry, are more than ever in the focus of both the political and the academic spheres. The importance of knowledge and technology transfer is increasingly stressed in various economic development plans and strategies. The increased interest is due to the fact that universities are located at the crossroads of education, research and innovation, which might be crucial for the country's economic competitiveness. The commercialization of university research results is a well-defined task of technology transfer offices. Measuring the efficiency and successfulness of such offices is a difficult, but not impossible task. The present article aims to analyze the existing literature on measuring the efficiency of technology transfer activities and to introduce the most commonly used measuring methods of effective technology transfer. The article attempts to answer the question how to measure the efficiency of technology transfer by reviewing the available international literature and by analyzing secondary data.
-
The effect of sulphur and nitrogen supply on the growth and nutrient content of spring wheat (Triticum aestivum L.)
65-70Views:476Sulphur is an essential element for plants. Decreasing sulphur deposition from the air, and the use of more concentrated phosphate fertilizers, which contain no sulphur, has led to reports of sulphur deficiencies for wheat. Sulphur deficiency significantly affects yield and also the quality of wheat. The pot experiment was set up on calcareous chernozem soil at Látókép, Hungary, test plant was spring wheat (Triticum aestivum L). Seven treatments were used where nitrogen and sulphur were supplied as soil fertilizers in increasing rates (NS1, NS2, NS3) and in foliar fertilizer as well (NS1+fol., NS2+fol., NS3+fol.). Plant aboveground biomass production was determined in samples taken in the stages of development BBCH 29-30, 51-59, 61-69, 89. The nitrogen and sulphur content of straw and grain were measured. N/S ratios of grain and straw were calculated. The weights of grain were ranging between 8.6–16.1 g/pot. NS2 and NS2+fol. treatments produced the highest values. Foliar fertilizer had no further effect on grain. Analysing the values of the straw, it was observed that tendencies were similar to values of grain. The NS2 treatment produced the highest weight of straw and the NS3 rate already decreased that amount. The obtained results show the unfavourable effect of excessively high rate applied in NS3 treatment. The supplementary foliar fertilizer had no significant influence on the weight of straw. Both N and S-uptake of plant was very intensive at the stem elongation stage, then the N and S-content of plant continuously decreased in time in all treatments. The N-content of grain ranged between 2.215–2.838%.The N-content of grain slightly increased with increasing of nitrogen doses. In the higher doses (NS2, NS3) foliar fertilization slightly increased the nitrogen content of grain, although this effect was not statistically proved. The N-content of straw varied from 0.361 to 0.605%. The growing dose of soil fertilizer also considerably increased the nitrogen content of straw. Foliar fertilization further increased the nitrogen content of straw. The S-content of grain ranged between 0.174–0.266%. The lowest fertilizer dose (NS1) significantly increased the sulphur content of grain. The further increasing fertilizer doses (NS2, NS3) did not cause additional enhance in sulphur content of grain.The foliar fertilizer also did not change the sulphur value of plant. The increasing amount of soil fertilizer and the supplementary foliar fertilizer had no effect on the sulphur content of straw. The treatments influenced the N/S ratios of grain and straw. On the basis of experimental results it can be concluded that the examined nitrogen and sulphur containing soil fertilizer had positive effect on the growth and yield of spring wheat grown on the calcareous chernozem soil. The soil fertilizer application enhanced the grain nitrogen and sulphur content. The highest rate of fertilizer (600 kg ha-1) proved to have decreasing effect on the yield. The sulphur and nitrogen containing foliar fertilizer did not have significant effect on the yield parameters but slightly increased the nitrogen content of plant. -
Nutrient deficiency and effects of various nutrition technologies on crop health
109-113Views:636The impacts of climate change on crop production are increasingly noticeable. Extreme weather conditions – such as devastating droughts, which occur more often – have serious effects on crop conditions, thus damaging their defence ability against pathogens and pests. Therefore, in order to achieve high-quality and high yielding crops, it is urgent to elaborate new technologies that improve general condition of crops and prevent development of nutrient diseases. Those crops which suffer from the lack of certain nutrients are more sensitive and their tolerance against diseases are decreased. Nitrogen – as the most influencing macronutrient in yield – is also essential in maintaining crop health. Nevertheless, due to the complicated processes in soil (such as leaching, denitrification), the utilization of nitrogen is not nearly complete, therefore nitrogen stabilizers may be needed to maximize this factor. The use of these stabilizers can be promising where plants with high nitrogen content are grown, although further experiments are needed in which impacts of nitrogen stabilizers on crop protection aspects are examined as well, since there is a close correlation between exaggerated nitrogen fertilizing and sensitivity to pests. During my research I am going to examine the combined effect of foliar fertilizer and nitrogen stabilizer on crop health. Furthermore, my goal is to find clear correlation between pathogens and the different technological variants of nutrition.
-
Comparison of Variability among Irradiated and Control Inbred Maize Lines via Morphological Descriptions and Some Quantitative Features
70-73Views:286Knowledge of genetic diversity in breeding material is fundamental for hybrid selection programs and for germplasm preservation as well. Research has been done with nine irradiated (fast neutron) and four non-treated inbred lines. The aims of this study were (1) to investigate the degree of genetic variability detected with morphological description (based on CPVO TP/2/2) in these materials, (2) to compare the genetic changes among irradiated and non-irradiated maize inbred lines (based on some quantitative features). The irradiation did not change any of the characteristics clearly in positive or negative way, which can be related to the fact that the effect of induced mutation on genetic structure cannot be controlled. From the irradiated lines we have managed to select plants with earlier ripening times and better phenotypes. We could distinguish 3 main groups by the morphological features; these results match our expectations based on pedigree data. Markers distinguishable on the phenotypic level (e.g. antocyanin colouration, length of tassels) were significant in all lines.
-
Study regarding the influence of the nPK fertilizers use in long term trial on heavy metals concentration in wheat grains
107-109Views:255The paper presents research results obtained in stationary experiments, carried out at Agricultural Research and Development Station Oradea, regarding the influence of nitrogen, phosphorus and potassium fertilizers, on Cd, Pb, Cu, Zn and Ni concentration on wheat grains.
The minimum concentration of cadmium in wheat grains was recorded in the case of the unfertilized plot N0P0K0, 0.12 mg kg-1, and maximum value 0.22 mg kg-1, was registered at the fertilized plot with N160P80K120, relative difference relative to control was 84.2%.
Lead concentration had the lowest value in the unfertilized plot, the value (0.4 mg kg-1) being under the maximum allowed (1.0 mg kg-1). In case of the fertilized plot with N160P80K120, the lead concentration had the highest value, 0.47 mg kg-1, but even in this case it was located beneath the maximum limit allowed.
In all four systems of fertilization, copper has not exceeded the maximum allowed limit (5 mg kg-1), the values have been comprised between 1.68 mg kg-1 at the unfertilized plot and 2.81 mg kg-1 at the fertilized plot with N160P80K120. In other plots of fertilization copper had concentrations of 1.97 mg kg-1, at the fertilized plot with N80P40K40, and 2.78 at the fertilized plot with N80P80K80.
The lowest concentration of zinc, 26.47 mg kg-1, has been registered in the control N0P0K0. In the other fertilization plots studied, the zinc concentrations had the following values: 27.66 mg kg-1 (N80P40K40), (N80P80K80) 29.87 mg kg-1 and 33.62 mg kg-1 (N160P80K120).
Nickel has registered the lowest value in the unfertilized plot, 3.47 mg kg-1. The fertilized plot with N160P80K120 had the highest value 4.94 mg kg-1, with 42.39% higher compared to the control N0P0K0.
-
Texture analysis as a method for grape berry characterization
Views:676The marketability of table grapes is mainly characterized by berry size, color, taste and texture. Mechanical measurements of table grape berries could provide objective information on the textural qualities of grape berries. In addition, this method might be suitable to study the effects of phytotechnical methods (such as girdling) on table grape quality. The aim of this preliminary work was to demonstrate how instrumental testing could be used to examine the effects of girdling on berry grape texture and define the textural characteristics of table grape berries. Cane girdling was carried out at veraison in two table grape varieties. Texture analysis was performed several times during the maturity. Besides this examination another five varieties were analyzed to assess their berry mechanical properties. Double compression test was used to determine berry hardness and its derived parameters. Puncture test was applied to evaluate skin hardness, skin elasticity and skin break energy. Skin thickness was also investigated. Berry hardness, skin hardness and skin thickness of the girdled grapevines were significantly affected by this technique. Most of the textural parameters showed differences among the seven cultivars.
-
The olive (Olea europaea) and the almond (Prunus amygdalus) related phytonutrients, and the associated health-promoting biological effects, a review
11-24Views:474With the increasing attention to the health promoting activities of the bioactive compounds from some plants, many researchers are focusing on the biological potential and mechanisms of certain cultivated plant species. In this review, we survey the olive and almond based extracts specific phytoconstituents and their associated health promoting effects that have been evaluated in experimental and clinical studies.
-
The recent state of cryopreservation techniques for ex-situ gene conservation and breeding purposes in small ruminants: A review
81-87Views:576The viewpoint of the recent cryopreservation techniques (CT) suggests the use of a reduced volume of cryopreservation solution, high concentration of cryoprotectants and ultra-rapid cooling and warming rates help to reduce cryo-injury and maximize the viability of the preserved animal genetic resources (AnGR). The CT had now become widely accepted as one of the best methods of choice for the ex-situ conservation of AnGR due to its high success rate recorded and no-invasive nature as compared to the conventional slow rate freezing (CSRF). Rapid advances and wide acceptability of the use of assisted reproductive technologies (ART’s) particularly artificial insemination (AI) in animal breeding had resulted in a greater loss of a large number of good quality genes in virtually almost all the native breeds of animals across the globe. Small ruminant (SR) animals are not an exception in such present predicaments situation of erosion and dilution of the valuable AnGR among the native breeds. As a result of this, 148 and 16 breeds of sheep and goats respectively have already become extinct in Europe and the Caucasus. In view of the aforementioned situation, the present review aimed at exploring some of the current states of development, roles played and potentials of CT in the conservation of SR genes and genome for the immediate and future breeding purposes for sustainable development. It basically covers; animal genetic resource, the need to conserve AnGR, tools for ex situ in vitro conservation of AnGR and recent developments in breeding and cryopreservation of SR AnGR.
Cryopreservation is playing a pivotal role in ex-situ gene conservation of AnGR. Decline in genetic diversity among SR breed population was high in Europe and the Caucasus. There is therefore, need for improvent on current stringent measures on conservation of AnGR in this region of the world.
-
Analysis of different fertilization settings’ effect in the case of the summer savory’s (Satureja hortensis L.) yield and active agents
101-105Views:324During our research we investigated the Mediterranean summer savory’s (Satureja hortensis L.) nutrient requirement with different fertilization settings in a small plot trial. We measured the medicinal plant’s raw and dry drug mass, and the presence of the main essential oil active agents under the different fertilization settings using SPME (Solid phase microextraction) and GC-MS (Gas Chromatograph mass spectrometer).From the drug’s raw and dry mass perspective, based on the obtained results, in our opinion, the N30P40K60 nutrient requirements were ideal in 2015, while the N60P80K120 nutrient requirement showed the best values in 2016. A significant relationship is assumed between the different fertilization settings and the essential oil active agents’ distribution. During the analysis of data, we compared three of the savory’s essential oil active agents’ percentage of presence in the nutrient requirement samples. -
Development of an InDel marker set to establish hybridization between wild boar and domestic pig (Sus scrofa) breeds
21-25Views:645Wild boar and domestic pig breeds belong to the same species (Sus scrofa), so they can easily have viable offspring. This could be a problem in preserving the genetic lines of wild boars, keeping clean the food industry from lower-grade hybrid boar meat, and „producing” ethically questionable trophies, too. The aim of our study was to develop a cost-efficient, fast, easy and accurate marker set which can separate the wild boars from hybrids and domestic pig breeds.
The InDel markers were developed using 59 full pig genomes of 17 different breeds (e.g. Duroc, Large White, Landrace, Mangalica, wild boar). Sequence differences between the genomes of wild boars and domestic breeds were identified in variant call files, and verified using the IGV software. Wild boar, mangalica and duroc specific primers to amplify the chosen InDel regions were designed using Primer3.
After preliminary tests five markers were chosen, three wild boar specific, one Mangalica specific and one Duroc specific one. Fluorescently labelled primers were used to make the valuation easier and more accurate with capillary electrophoresis instead of gel-electrophoresis. The markers were optimised individually and in multiplex conditions and tested in samples of 11 breeds.
In conclusion, a new, faster and cheaper set was developed to separate the wild boars from the hybrids and domestic breeds. Based on the preliminary testing on wild boars, duroc and mangalica breeds zero samples resulted false negative, so it is 100% accurate. In addition, it is a much more cost- and time-effective way than testing every single sample with STR sets.
-
Physiological traits and yield of three soybean (Glycine max (L.) Merr.) genotypes as affected by water deficiency
11-15Views:523Soybean is a very important legume; it has the highest protein content, and it is a very important source of vegetable oil. Soybean is droughtsusceptible, and drought is one of the major abiotic stresses that has been increasing over the past decades as a result of the global climatic changes. To evaluate the influence of drought stress, three soybean genotypes were grown under rainfed conditions, and compared to irrigated controls. The obtained results showed that the chlorophyll content, leaf area index and plant height decreased under drought stress conditions, which led to noticeable and sometimes significant yield reduction. Our results suggest more specific studies on the physiological changes of the local soybean genotypes under drought stress to better select the adopted ones.
-
Influence of temperature and variety on seed germination of soybean (Glycine max L. Merr) at different germination times
5-12Views:509Seed germination is an important stage in crop development that affects plant performance, crop yield, and quality. Many factors influence seed germination, and one of the most important factors is temperature. The closer the temperature is to the optimum, the faster germination will occur. Temperature affects seed germination in various plants and varies depending on the variety. Therefore, the effect of temperature on seed germination is necessary to investigate, also for soybean varieties. Soybean is one of the world's most valuable oil-seed crops. Generally, proper seedling establishment and germination of soybean seeds are crucial processes in the survival and growth cycle of the crop. Thus, a study was done to investigate the influence of temperature and variety on soybean seed germination at different times after sowing. The experiment was carried out at the Institute of Agronomy, Hungarian University of Agriculture and Life Sciences (MATE), Crop Production Laboratory. Seeds of two soybean varieties were subjected to three different temperatures: 15, 25, and 35 °C, and two soybean varieties, Martina and Johanna were tested. There were four germination times based on the days after sowing: Days 3, 5, 7, and 9. This experiment was set up with a completely randomized block design and four replications. According to the findings of this study, the Martina variety showed a better germination rate as well as higher vigor and viability than the Johanna variety in the first 12 days after sowing. At temperatures of 15 °C and 25 °C, both varieties achieved comparable percentages of viability, but they were more vigorous at 25 °C due to better total seedling length. Thus, the information gained from this study will indirectly determine and confirm the proper temperature for the initial growth of the Martina and Johanna varieties.
-
Study of the microbiological activity in the agrocenosis from Crisurilor Plain
73-77Views:238The seasonal variations of soil microorganisms depend on changes in the soil chemical properties and the microbiological processes of soil are determined in main by different cropping systems, soil management and season. Investigation of the microbiological properties of a haplic luvisol, under different cultivation conditions showed that anthropogenic factors such as fertilization and treatments with pesticides was favourable for certain microorganisms while others were inhibited by these factors. In order the quantitative occurence of microorganism was aerobic mesophilic heterotrophs (105–107 cellsxg-1 dry matter soil) were followed by Actinomycetes, yeast and mould (103–106 cellsxg-1 dry matter soil), nitrogen fixing bacteria (102–105 cellsxg-1 dry matter soil) and nitrifying bacteria (10-1–103 cellsxg-1 dry matter soil). The highest values of aerobic mesophilic heterotrophs were found in cropland and undisturbed meadow of haplic luvisol. Actinomycetes are more developed in undisturbed soils than in the cultivated soils. The number of yeast and mould was high in the apricot tree orchard, and Azotobacter and nitrifying bacteria were identified in a small number in all the soil variants studied. Among the total number of aerobic microorganisms, pH and humus content statistically proved relationship was established. Total number of yeast and mould depends on the proportion of 10.89% by moisture content and pH. The numerical presence of Azotobacter depends in a proportion of 9.6% by the ammonia nitrogen content and pH variations. The numerical presence of nitrifying bacteria depends in a proportion of 1.69% by the nitric nitrogen content and humus content variation.
-
Evaluation of technologies and resources from the spatial and social aspect
73-75Views:562The basic functioning of the world is mostly led by negative trends. One of the fundamental reasons for this phenomenon is that the different technologies (hardware, software, resources) do not act properly and in the proper structure by means of the produced products and services. Therefore, the examination of technologies and resources is a key question of our world and development from various aspects. Technologies convey all positive and negative impacts which can be regarded as the fundamental reasons and causes of harmonious or disharmonious development. For this reason, the role of technologies in development and harmonious functioning is of paramount importance.
As a final conclusion, we established that the different technologies (hardware, software, resources) are interpreted as impact conveyors which predominate by means of products and services in a way that their relation system is determined. By using the thermodynamic interpretation which is the basis of the functioning of the world, we built a system consisting of 14 elements to evaluate different technologies, to interpret its functioning and to develop positive interactions and trends.
-
White rust species (Chromista, Peronosporomycetes, Albuginales, Albuginaceae) on common weeds in Hungary
30-33Views:525The obligate plant parasite fungi in the family Albuginaceae are responsible for causing white rust diseases on weeds and they are rather common worldwide. Weedy plants with characteristic symptoms have been collected in 2014 and 2015 on location Hajdú-Bihar and Jász-Nagykun-Szolnok counties in Hungary. The determination of the species were based on the morphological characters both pathogens and hosts. Albugo candida was determined on shepherd’s purse (Capsella bursa-pastoris). Common purslane (Portulaca oleracea) is a host for Wilsoniana portulacae. The fungus Wilsonia bliti (syn.: Albugo bliti), the causal agent of white rust disease was found on redroot pigweed (Amaranthus retroflexus).
-
Impact of nitrogen and sulphur fertilization on the growth and micronutrient content of spring wheat (Triticum aestivum L.)
211-219Views:403Micronutrients are as important as macronutrients for crops. Each micronutrient has its own function in plant growth. Zinc is important for membrane integrity and phytochrome activities. Copper is an essential micronutrient required for the growth of wheat. Manganese is required for enzyme activation, in electron transport, and in disease resistance. The pot experiment was set up in greenhouse on calcareous chernozem soil Debrecen-Látókép with a spring wheat. In certain development stages (according to BBCH growth scale of wheat), at the beginning of stem elongation (29–30), at the heading (51–59), at the flowering (61–69) stage three average plants were removed from all pots for analysis. Fresh and dry weight of the plant samples were measured. Plant leaves after drying were digested by HNO3-H2O2 methods and manganese, zinc and copper contents of plant were quantified by atomic absorption spectrophotometry. At the flowering stage, when the nutrient uptake of plants is the most intensive, the weight of wheat ranged between 0.94–1.57 g plant-1. In this development stage, the NS2 treatment produced the highest weight of wheat, and compared to this the NS3 treatment decreased that value already. The results show unfavourable effect of NS3 treatment. On the basis of microelement content of wheat and the weight of a plant, nutrient uptake by plant were calculated. At the beginning of growth the starter treatment had positive effect on Cu-uptake compared to the NS1 treatment, where the same dose of fertilizer was stirred into the soil. Wheat is very sensitive to copper deficiency, so copper dissolved by starter treatment could be favourable to the early development of wheat. At flowering stage the Zn-uptake of wheat became the highest and it was between 133.7–234.6 mg plant-1. The Mn-uptake of wheat plant was higher than the Cu- and Zn-uptake of wheat.
This phenomenon can be explained by the fact that the untreated soil had higher Mn-content, than Cu- and Zn-content. To summarize the results, it can be stated, that the copper uptake of wheat was more affected by the different treatments in the stage of stem elongation, while Mn- and Zn-uptake of wheat were influenced primarily in the stage of heading and flowering.