Search
Search Results
-
Fundamental Considerations for Finite Element Modelling of Rubber Material Tensile Test
7-13Views:611Aim of this research is to get familiar with the fundamental considerations for finite element modelling of rubber’s tensile test. Hyperelastic materials such as rubber are widely used in a variety of industries ranging from tire to aerospace for various structural applications. The most important feature of rubbers is their ability to experience substantial deformation under small loads and maintain initial configuration without noticeable permanent deformation after removal of the load.
-
Investigating the Motivation of Adventure Park Visitors
106-126Views:428In the world of runaway, “homo-sitting” and mobile telephones, the quality of leisure time is gaining increasing importance, most of which is the experience gained and the characteristics of existing natural factors. A variety of thematic and adventure parks are reported every year, increasing travel and visitors' growth every year, the service offering of which broadly satisfies the needs of modern man and kind. In the focus of our research, we set the link between recreational habits and motivation of adventure park visiting. Use the survey questionnaire to calibrate consumer habits (n = 408). There were significant differences in the number of factors studied, such as those who seek more physical activities in their free time and prefer to respond to the challenge and extravagance motivating motivation in each of the adventure parks, or even for leisure-time enthusiasts. Our research reveals that service providers should consider targeting their leisure time habits, for example, they can benefit from a thorough consumer mapping from the point of view of electoral motivation.
-
Investigating the Development Impact of the Reorganized Quality Control System on One of the Public Service Provider’s Pers
226-241Views:205At the investigated public service providers’ personal customer service they did significant changes were made in the field of quality control since April 2017. A method which existed and was used for a long time was modified, which had one of the most important objectives from a management aspect to help the development of the administrators in order to provide high quality. During our research we mostly focused the development impact of the modified system. We wanted to obtain an answer whether the new system is better for promoting the development of the administrators than the former method and to what extent administrators require feedback related to their job as well as whether this system is properly inspected and controlled by leaders. During the research we targeted three focus points related to the development aspect: self-check, constructive feedback and the degree to which seated work is controlled. Based on the results of the investigation we draft such suggestions which can promote efficiency if necessary and possibly even make the operation of the system more efficient.
-
Was UEFA’S Goal of an Environmentally Friendly Euro 2020/21 a Success?
152-164Views:852The football Euro 2020/21 has been said to be more environmentally friendly, as it was spread all over Europe, thus no new stadiums needed to be built. On the other hand, more traveling became necessary. How does these effects behave with each other? Was the attempt to reduce emissions successful?
This paper seeks to compare the goals for UEFA 2020/21 for environmental friendliness and its success. A mixed research strategy was adopted in this paper where qualitative analysis was done on existing literature review and also quantitative approach where assumptions were drawn from literature review to estimate the environmental impact. This paper found that UEFA's initial estimate of 425,000 tons of carbon dioxide emissions in traveling for the Euro Cup 2020 was a bit higher than the actual amount of carbon emissions from our calculation of 143,531 tons. What stands out is that its findings agree with UEFA's estimate that Euro Cup 2020 emissions were lower than that of 2016 which emitted 517,000 tons of carbon dioxide for traveling. This gives a greater reason to conclude that UEFA met its goal of reducing carbon emissions. The overall carbon dioxide emissions in traveling and constructing stages were 1,275,988 tons in Euro Cup 2020 and 2,803,000 tons in Euro Cup 2016. This further affirms the overall carbon dioxide emission reduction by half in Euro Cup 2020 as compared to Euro 2016. From our findings, we can conclude that the Euro Cup 2020 indeed succeeded in reducing overall carbon dioxide emissions by half. Despite the success, this paper views that the carbon emissions are still high for a single event and hence there is room for reduction of carbon emissions to lower levels as possible. we can conclude that the Euro Cup 2020 indeed succeeded in reducing overall carbon dioxide emissions by half. Despite the success, this paper views that the carbon emissions are still high for a single event and hence there is room for reduction of carbon emissions to lower levels as possible. we can conclude that the Euro Cup 2020 indeed succeeded in reducing overall carbon dioxide emissions by half. Despite the success, this paper views that the carbon emissions are still high for a single event and hence there is room for reduction of carbon emissions to lower levels as possible. -
Literature Overall of Fatigue Analysis Approaches of Vehicle Components Made of Rubber
130-140Views:282Generally, the most frequently used structural materials are metals which have high strength and stiffness. However, there are many cases when other important properties come to the front, as well as high deformation capacity with elastic behavior, high viscosity namely good damping effect. Due to its above mentioned properties, rubber is widely used in vehicle and automotive industry. Vehicle components made of rubber usually exhibit large deformations. Cyclic finite deformations generate temperature in hyperelastic materials. Furthermore it is necessary to take into consideration the effects of ambient temperature. The mechanical properties of rubber depend on temperature and temperature changes can accelerate chemical alteration processes which lead to the material deterioration and fatigue processes. Research on fatigue behavior and fatigue properties of rubber has a great significance for predicting fatigue life and improving durability of rubber products. There are several studies on the fatigue behavior of rubber-based materials, but there is less research in the fatigue life prediction considering the influence of temperature and temperature changes. First purpose of this paper is summarizing the influence of temperature and temperature changes on the fatigue behavior of rubber. The second purpose of this study is to provide an overview of the state of the art on the fatigue life prediction of rubber with primary focus on the different methods available for prediction of fatigue life under the influence of temperature and temperature changes.
-
Investigation of Aluminum Dross as a Potential Asphalt Filler
445-451Views:256There is a great concern about utilizing different waste materials all over the world. Stockpiling in landfills is not a final solution, therefore researchers try to find alternative methods to utilize these materials [1-5]. One potential area may be road construction. Fillers are one of the most important components of asphalt pavements. It has a dual role. First of all, these fine grained mineral materials (d<0.063 mm) enhance the cohesion with bitumen. Second is to fill the gaps between the particles to produce more compact mixture [6]. The aim of this research is to reveal the possibility of utilization of aluminum dross as a potential asphalt filler. This material, which is a by-product of aluminum casting process, is produced in large quantities year by year and its storage in landfills is not a proper solution. Therefore, there is an increasing demand to utilize this material. During the research material structural tests were made, which can characterize the samples (limestone powder, dross), and the cohesion between bitumen and filler can also reveal. Particle size distribution, BET specific surface area and porosity were investigated. Scanning electron micrographs were taken and oil adsorption test were also made.
-
Néhány választott egyéni sportág jelenlegi helyzetének és versenyképességének elemzése Magyarországon
1-20Views:882In the past few years, our country increased importance of sports. 2010 was highlighted in 16 individual sports, which receive state subsidies for the period 2013-2020. In this research we selected the four disciplines of sports - canoeing, modern pentathlon, wrestling, judo - I examined the domestic situation and competitiveness. The sports competitiveness investigated on the basis of their role in the media occupied, according to the method of the International Olympic Committee (IOC). The IOC and the Olympic Games Organising Committee (OCOG) mediation from the proceeds distributed to sports, by way of support. I think it is important to examine the competitiveness of sports, and international jótapasztalatokat used later to propose solutions to increase viewing figures. The first stage of this research, which shows the position of sports Hungary, explore their differences and draw parallels between the similarities.
-
The Relationship Between Leadership and Management and Quality Management: Systematic Literature Review
48-62Views:459This publication is intended to examine the close relationship between quality management and leadership and organization, highlighting the possibilities of increasing organizational efficiency in both industrial and non-industrial environments. During the systematic literature review, we examined the role of leadership, the closely related organizational culture, and quality management. The publication aims to explain how quality systems and frameworks, such as ISO and the EFQM model, support strategic planning and sustainability, thus providing direction for modern organizations. The research emphasizes the importance of digital transformation and knowledge management, and we have formulated the future research goals that can advance the productivity of organizations.
-
Talent Management in International Practice Through the Example of Europe and China
454-464Views:388The reason behind is that they have their own principles, strategic goals and industrial environment that they have to manage on daily bases. The current labour and talent shortage across Europe forces local companies to supply their demand of manpower from foreign countries – encouraged by the ’four freedoms’ of the EU. In consequence of the globalisation, we have to keep in mind that running a talent management system has its challenges. For instance, employees with different cultural background might have unconventional needs. Due to the cultural, demographical and economical differencies, we must know the structure of our labour force to use the most beneficial tools to induct, motivate or retain our human resource. The aim of this research is to analyze Europe’s and China’s talent management systems to reveal similarities and differencies between them and pick the most notable ones. From the point of comparison, analysing China would be important for European countries to discover further possibilities, as nowadays China has one of the most dynamically developing economy with enormous population behind. The primary result of the research is that deficiency of talent is irrespective of the size of the population and it causes difficulty in both European and Chinese fields, therefore it proves to be a real and general challenge needing attention at organizational level. Furthermore, identifying regional patterns considering peculiarities, the framework of talent management systems can be defined and be found summarised in the article.
-
The significance of analysing potential conflicts in the sales-marketing integration
41-59Views:233Our research aims to identify the critical interfaces between sales and marketing that need to be improved in order to ensure productive cooperation. The relationship between the two departments is full of conflicts and interdependencies. The improvement of communication is of strategical importance, as it is key to staying competitive in the market. The effectiveness and quality of the sales-marketing cooperation is a key factor that is negatively affected by personal and organisational factors as well as a lack of information and conflicts. In addition to the key factors of managing the sales-marketing interfaces, we have also identified the actions that can promote their improvement, including strategic and organisational roles and responsibilities. Our empirical research results show that regular information exchange, more common and interdisciplinary meetings, and a clearly communicated and implemented corporate vision have a positive effect on the coordination and integration of the sales and marketing departments. Consequently, management is reponsible for establishing a corporate vision, i.e. a comprehensive management culture that is clearly communicated across the board in order to increase the employees’ sense of belonging. Of all elements of management culture, the most important factors are coordination and the establishment of a common strategic sysyem. All in all, corporate profit, which is of key importance to the employer, is largely dependent on the successful integration of the sales and marketing departments, which can be achieved through the implementation of the above factors.
-
Evaluating the Entrepreneurial Performance in South America. Case of Chile
13-28Views:361The research objective is to explore Chile's entrepreneurial landscape by assessing individual characteristics and institutional factors through a 'pillars' framework and compare it against Colombia, and Brazil; to identify socio-economic, individual, and institutional differences using the Global Entrepreneurship Index (GEI); to apply bottleneck approach to highlight areas requiring policy intervention. GEI features individual and institutional stage variables in a method where every variable collaboratively interacts, incorporating 14 foundational elements and three sub-indexes: attitudes, abilities, and aspirations. Ranking 18th on the GEI globally and the best in Latin America, Chile excels in key entrepreneurial pillars, showcasing strengths in innovation and a robust entrepreneurial culture. Brazil closely rivals Chile in competition and networking, emphasizing political and economic influence. Colombia surpasses Chile in internationalization and growth-stimulating policies but faces challenges like historical conflicts and wealth distribution. This study identified areas where immediate policy intervention may be necessary by examining Chiles's entrepreneurial ecosystem. The Penalty for Bottleneck (PFB) technique identified the weakest pillars highlighting process innovation, competition, and internationalization. The primary component identified as a bottleneck for resource allocation is Process Innovation, accounting for 73% of the allocation, followed by Competition at 23%. The findings show that allocating more resources to process innovation may improve greatly the overall GEI score.
-
Application of Nanomaterials in Food Industry and Agriculture
116-126Views:302Nanomaterials have unique application features which can mainly be associated with their size properties. These materials have much higher surface than the normal particle size variant of the same materials. Due to these properties, nanomaterials are widely used in the industry. Food industry and the agrarian sector are using these materials increasingly. The main goal of nano size components and additives are the improvement of some parameters of the food manufacturing process, the elongation of the best before date of the food and the improvement of the texture, stability and the consistence of the food. Probably, nanomaterials will play an important role in the development of the food industry, moreover, it can be anticipated that nanotechnology will also appear there and will influence the whole food chain. It should be noted that food industry is using several nano size class materials which are not referred to as nanomaterials. Some examples are the micelles of some proteins, like milk protein, and fatty acids. Considering all these, the aim of our work was to present a thorough review and summary of the current applications.
-
Direct Optimization of an Automotive Sheet Metal Part Using ANSYS
134-142Views:650Optimization of automotive parts nowadays is mainly used to design lightweight and cost-effective vehicle parts in order to improve the cost and efficiency. In this research, a sheet metal part was taken into consideration and optimized using direct optimization module in ANSYS to evaluate the process. An initial Finite Element Analysis (FEA) was done on the sheet metal part by adding forces and constraints in order to initiate direct optimization. The purpose of the optimization is to minimize the mass of the sheet metal part and maintaining a certain Factor of Safety (FOS) by automatically modifying the sheet thickness and the dimension of the side holes. As a result, the best candidate point with 23% mass reduction was found which complied with FOS value was selected for optimal geometry.
-
Ethical Leadership, at the Beginning of a Research
188-195Views:505In this study I deal with the ethical leadership. I give an insight into the approaches of ethical leadership, give a literature review on the concept of ethical leadership, and introduce the measurement methods used in the most important empirical researches related to this topic. I also try to report on the first results of my research (I plan to describe features of Hungarian leaders based on a smaller sample). How does this relate to the challenges of Industry 4.0? I give the answer from the fact that, with the advent of these new technologies (which in themselves have ethical questions), among these new challenges, the focus of the manager's attention will continue to be partly on their employees. If they set an ethical example for their subordinates, they encourage their employees to act ethically, which gives the company a competitive edge in many ways, both in the product/service market and in the labor market too. So, with my study, I would like to draw the attention of executives and managers to the fact that new technologies and the human factor together bring new successes, and that one possible way of doing this is by consciously managing their company ethically and developing an ethical organizational culture.
-
Advancing Sustainable Waste Management through National Recycling Rate under SDG 12.5.1
61-72Views:341Solid waste management remains a pressing environmental challenge in both developed and developing nations. Recycling has been promoted globally as a key pathway to sustainability, yet recycling rates often provide only a partial picture of performance. In many contexts, challenges such as poorly regulated recycling policies, informal sector dominance, and practices that prioritize profit over environmental sustainability limit progress towards Sustainable Development Goal (SDG) 12.5.1, which tracks the national recycling rate. This study investigates the extent to which recycling rates reflect sustainable waste management and identifies the underlying factors that influence their effectiveness. The major objective of this study is to evaluate recycling rates as an indicator of sustainable waste management. This is further specified by: (i) examining recycling practices in selected countries (Germany, South Korea, USA, Brazil, and India), (ii) identifying key drivers and barriers that influence recycling performance, and (iii) assessing the implications of recycling rates for sustainable waste management systems. The study employed a mixed-methods approach, combining secondary data analysis, comparative country assessment, and policy review. Results show that recycling rates are useful but insufficient as a stand-alone measure of sustainability, since they are influenced by broader elements such as policy enforcement, economic incentives, public participation, and market structures. The findings highlight that Nigeria’s recycling rate remains significantly low compared to leading economies, underscoring the need for integrated waste management reforms. This research contributes to environmental management discourse by demonstrating that while recycling rates provide a benchmark for SDG 12.5.1 monitoring, they must be interpreted alongside contextual drivers to ensure meaningful progress towards sustainable waste management.
-
Analysis of Social Media Activities - Through the Examination of Handball Clubs Competing at Different Levels
39-53Views:547In Hungary, handball enjoys special attention and support, this is true not only for our country, but also for Europe, and the sport is gaining more and more space worldwide. One of the biggest innovations of the last two decades is certainly social media, which has reformed the basic strategies related to information transfer and traditional marketing activities. The processes of content production on these platforms have radically changed, which every sports club should pay attention to, as they can gain significant advantages in terms of economics, marketing and community building if they are able to communicate well. Three sports clubs competing at different levels were compared during a qualitative study in terms of their social media marketing strategy activities, namely PICK Szeged, Balatonfüredi KSE – BFKA Balatonfüred and DEAC handball team. The basic concept of this research model was built on how the online marketing communication activities of club teams fighting for different professional goals at different levels differ from each other, as well as what are the development opportunities and aspects that can be used as effectively as possible on social media platforms. The handball club teams agreed on several research questions, but a significant difference could also be discovered in one area, in which the professionals responsible for social media disagreed or represented a different point of view. Looking at my results, it can be concluded that behind a successful online marketing strategy there is always serious preparation and planning work, as well as the diversification of content production on different platforms, because the consumer communities of the platforms are also different from each other.
-
Analysis of Vibration During Turning Process of Different Materials
200-205Views:217In this article, we would like to introduce the problems caused by vibrations in case of polymer turning processes. Nowadays there is a lot of research in this topic, to avoid the unnecessary phenomena of vibrations. The two most common methods are the Spindle Speed Variation (SSV), and the Vibration Assisted Machining (VAM). In case of SSV, the CNC machine can increase and decrease the speed of spindle continuously during turning which can significantly reduce the effects of chatter. This method is beneficial for longer workpieces when there is not any support except the chuck. Vibration-assisted machining can be used to minimise the problems caused by vibrations. VAM combines precision machining with small-amplitude tool vibration to improve the fabrication process. It has been applied to some processes ranging from turning, drilling to grinding. Based on the enumerated above we made some trial measurements about the basic vibrations of the turning tool shank. The tests were done on an NCT EUROturn-12B CNC machine which can found in the workshop of our institute. The tested material was Polyamide 6 because this is the most commonly used polymer in the industry. In the future, we would like to test some other basic and composite polymer materials too. The equipment was served by a specialist from SPM Budapest Kft. With these tests, our goal was to make sure that the equipment and the measuring setup are suitable for our future research.
-
Global and Domestic Status and Prospects of Green Biomass Utilization
85-105Views:256Nowadays, the energy consumption of global population is depending on fossil fuels, but the role of renewable energies has been increasing rapidly, primarily due to the depletion of fossil fuels, the appreciation of environmental problems and climate policies. Biomass is the fourth most important energy resource in the world, provided an estimated 70% of global renewable energy supply. However, the annual growth rate of biomass is lagging behind modern renewable energy sources. The type of biomass is very diverse and can be processed and utilised by different methods. Currently, in the "green chemistry" industry (the replacement of petroleum-based, synthetic chemical raw materials with bio-based compounds from plant biomass), the importance of combustion, pyrolysis, biogas, bioethanol, biodiesel and basic chemical compounds production have been increasing. The objectives of the present research is to analyse the global and domestic status of renewable energies and biomass production, furthermore the possibilities of utilization of perennial, herbaceous biomass plant, the giant reed (Arundo donax L.), with which has been conducting research for numerous years at the University of Debrecen.
-
Examining the Competitiveness of Fish Products on the Market
151-163Views:212Fish and fishery products are one of the key ingredients in human nutrition and are therefore outstanding in terms of both production and trade. Different processed fish products are available in many countries around the world due to globalization and a fast supply chain. In our study, we examined the market for fish and fishery products using secondary data collection. The data were collected several years ago from the databases of FAO, EUROSTAT, COMTRADE and KSH The comparative advantages or disadvantages of international trade were determined with the help of the RCA index for the role of Hungary and the EU in the world in the case of different categories of fish products. The aim of our research is to compare the fish products of different processing in Hungary and in the EU compared to the international situation, paying special attention to the main exporting and importing countries. Based on the secondary research the study has a detailed the specificities of trade, the trends observed in recent years and the competitiveness of fish products in Hungary and the Member States of the European Union and effect relationships behind the RCA-index results.
-
The Location of Energy Plantations in the Sowing Structure and Its Evaluation with Linear Programming
255-269Views:202The research is examining traditional arable crops and woody plants on the basis of their marginal contribution. Calculations of income, expenditure and revenue were made on the grounds of sectoral technologies, which were the basis of the value of marginal contribution of the given sectors. As the linear programming model is quite comprehensive, we used this method for our calculations. To compile our model, we have gathered all the necessary information from farmers of the region of the Northern Great Plain. The missing data was completed from the databases of the Hungarian Central Statistical Office (KSH), Institute for Agricultural Economics Research and Information Technologies (AKII) and the Statistical Office of the European Communities (EUROSTAT). In some cases, we also used data of the Agricultural Administration Office and the Ministry of Agricultural and Rural Development. Our goal is to compile a 12-year production structure that suits for the characteristics of the region of the Northern Great Plain by achieving the maximum marginal contribution of a feature-farm.
-
Comparative Analysis of Motivation Theories
1-13Views:1504The aim of the article is to compare motivation theories from the view of general psychology and work psychology. The research was done by using secondary sources and by analyzing motivation from both views. The difference between the two lines lies in outcome orientation. Psychology is more descriptive work psychology tends to focus on the results of the motivation process. In comparison, both have their values. The relevance of the research is to provide a theoretical basis for improving the development of more relevant motivation theories.
-
Material flows and stocks of a service company from Debrecen
313-321Views:410Over the past 25 years, many renowned scientists from a number of research institutes have developed a new research method, a new family of methodologies which is the MFA (Material Flow Analysis). The importance of MFA is given by the extent of excited material flows created by mankind. The basis of MFA's growing success is a radically new, interdisciplinary vision that requires collaboration between the natural and social sciences (ecology, thermodynamics, and economics), not only as an effective tool for examining material efficiency of production and environmental pressures, as well as the security of supply of the strategic material requirements of the system under investigation. In our article, we conduct an enterprise level analysis of the input and output side material flows and materials of a service company in Debrecen for 2018 using the MFA method. MFA indicators capture environmental pressures in a natural dimension, that is, in terms of mass, energy, or land, respectively, in terms of kilograms or tons, of the company's raw materials and their changes, or material inputs.
-
Development of Gait Recognition in NI LabVIEW
22-26Views:219Nowadays, one of the most significantly improving area in security is the world of biometric identifiers. Within the biometric identifiers, the research group is working with the gait recognition speciality. The research group realized a complex gait recognition system in NI LabVIEW, that can detect more reference points simultaneously with a universal camera and is capable of suiting predetermined curves on the detected points. Moreover, the program can compare the functions suited on the reference curve and the actual curve and evaluate if the two gait images are the same or not. In the program there is a saving and a reloading function which contributes to the production of the reference gait image. The foot analysis program before the gait recognition is designed to improve accuracy. The self-developed gait recognition system was tested on more persons and the False Acceptance Rate (FAR) was zero.
-
Development possibilities of Environmental Engineering Education – SWOT analysis
75-80Views:274Nowadays we are struggling with many environmental issues that require up-to-date environmental specialists. Amongst the causes of environmental problems, long-standing industrial companies are dominant, for which, on the one hand, the assessment and elimination of existing environmental damage and prevention can be the goal. Universities would be able to provide the necessary knowledge and skills with appropriate educational and research programs. In the research we carried out a comprehensive study of environmental engineering education programs of Hungarian higher education institutions. We analysed the strengths, weaknesses, opportunities and threats of the various educational programs. In addition, on the basis of the analysis we made suggestions on the possible directions of the development of the environmental engineering training.
-
Strategic Role of HR in Hungary and Slovakia, Based on the International Cranet Research (2015-2016)
478-489Views:441Western-European management trends have been spread including modern approaches to human resource management over the past decades in the countries of Central and Eastern Europe. The point of the new HR conception is the strategic partner role, which is underpinned by the appreciation of human resources. There was a rapid change in the management methods of the organizations due to the socio-economic changes in the examined countries. However, in many places the personnel departments were simply renamed, and their HR staff are still concentrating on their traditional activities. These activities are important and should be fulfilled today as well, but to play an influential role in the design and maintenance of organizational competitiveness HR should have a new, strategic attitude. The study examines HR's strategic role based on the empirical international Cranet research in Hungary and in Slovakia.
