Search
Search Results
-
Describing Fusarium diseases on maize in 2013 using data from several production sites
60-64Views:413As in other parts of the world, the frequency of weather extremes has increased greatly in Hungary in recent years. This means that maize production is faced with greater risks from all aspects: nutrient replacement, irrigation, plant protection. This is especially true of fusarium diseases. In a continental climate, the pathogens causing the most serious problems are species belonging to the Fusarium genus. They infect the ears, which – besides reducing the yield – poses considerable risk to both human and animal health due to the mycotoxins produced by them. Depending on which Fusarium species are dominant at a given location, changes can be expected in the level of infection and in the quality deterioration caused by the mycotoxins they produce. Fusarium spp. not only damages the maize ears but when pathogen attacks the stalk, the plant dies earlier, reducing grain filling and resulting in small, light ears. In addition, the stalks break or lodge, resulting in further yield losses from ears that cannot be harvested. The degree of infection is fundamentally determined by the resistance traits of the maize hybrids, but also a great role in that region Fusarium species composition as well.
-
Microbiological preparations affecting the soil nutrient availability and growth of ryegrass in a pot experiment
49-53Views:227The effects of different bacterial fertilizers and their combinations with NPK fertilizer and wheat straw were investigated on some soil properties (chemical parameters) and on the biomass production of testplant. The applied quantities of the bacterial fertilizers were the double of the recommended dose. The experiment was set up in 2013 at the Institute of Agricultural Chemistry and Soil Science, in a three replications, in a random block design. Calcareous chernozem soil; originating from Debrecen (Látókép) was used with ryegrass (Lolium perenne L.) test plant. At the end of the experiment (after 8 week) the samples of soil and plants were determined for nitrate-nitrogen, ALsoluble phosphorus and potassium content of soil, the weight of green biomass of ryegrass per pot, the dry matter and moisture content of ryegrass. Straw treatment resulted better water and available nutrient content of soil in general. Inoculation however was not improving the biomass production over the fertilizer treatment. Interrelation with the recommended dose could be further studied.
-
Advancement of a Common Wheat (Triticum aestivum L.) Selection System
8-11Views:167All the research in Hungary and other countries in Europe focus on improving the quality of crops and increasing the competitiveness of production.
In this respect, we have to advance the conventional technological elements, reduce the application of pesticides and fertilizers, and produce new varieties suitable for environmentally-sound production. In our crop breeding programs, we applied conventional and biotechnological methods (embryo rescue and double haploid methods) in order to get somaclonal and gametoclonal variations.
We produced winter wheat lines (HP-31-95, HP-82-96) by traditional way, which have high baking qualities and high nutrient efficiency. Some diseases can limit the quantity and quality of a wheat crop. We examined several wheat diseases in our winter wheat candidates, and we found that our progenies have resistance to leaf rust.
With respect to a serious problem was the small quantity of applied fertilizers and the other externals, our research focused onto advance a common wheat selection system, with the help of it, we can handle these problems. We have summarized that our selected progenies can compete with the registered varieties with quality and environmental respect. -
Soil Fertility Management in Westsik’s Crop Rotation Experiment
34-39Views:170The crop rotation experiment, established by Vilmos Westsik in 1929, is the best known and most remarkable example of continuous production in Hungary. It is still used to study the effects of organic manure treatment, develop models and predict the likely effects of different cropping systems on soil properties and crop yields. Westsik’s crop rotation experiment provides data of immediate value to farmers concerning the applications of fertilisers, green, straw and farmyard manure. The experiment also provides a resource of yield, plant and soil data sets for scientific research into the soil and plant processes which control soil fertility, and into the sustainability of production without environmental deterioration. The maintenance of Westsik’s crop rotation experiment can be used to illustrate the value of long-term field experiments.
-
Effects of production factors on the yield and yield component of winter wheat
26-31Views:173The effect of major production factors (forecrop, fertilisation, irrigation, soil cultivation and soil preparation) on the yield components and yield of winter wheat were studied in a long-term experiment set up at the Látókép Experimental Nursery of the Agricultural Sciences Centre of the University of Debrecen. The results of regression analysis led to the following conclusions:
• In our experiments in 2000, after using maize as a forecrop –based on the results of analysis of regression – fertilisation determined the yield.
• After using pea as a forecrop, a N50 P35 K40 kg/ha fertiliser rate led to an economical increase in the yield of winter wheat.
• None of the determinative yield components varied significantly for winter wheat produced after using pea as a forecrop.
• There is a closed, significant correlation between plant height, spike length, plant and spike mass, the number of spikelets and grains per spike after using maize as forecrop. The thousand grain mass is different from the other yield components, because it is not part of the relation system of
those yield components.
• The increased yield of winter wheat after maize has been used as a forecrop is due to the positive change in grain number per spike yield component. -
Production technology development of millet at different ecological conditions
63-67Views:352The millet is a very special plant with good adaptation that gives the possibility for the late sowing and secondary production. However the effects of late sowing modifies the efficiency of the agrotechnological elements. The exainations – focused on this aspect – was conducted in the DU RINY and DU RIK in small plots in four replications in 2014. Among the examined factors (sowing time, nutrient supply, growing area) sowing time had the largest effect. The effectiveness of the agrotechnological elements decreases under unfavourable circumstances caused by the late sowing.
The agrotechnical elements modifies the yields in the examined genotype. Sowing time had the biggest effect on the yields of millet. The genotype „Maxi” had the highest yield in the different treatment variations.
The yield differences were significant between the sowing time and plant density variations, but the nutrient supply had not significant effect (the rate of precipitation was unfavourable in 2014 season).
-
The effect of crop protection and agrotechnical factors on sunflower in the Hajdúság region
39-46Views:218Extreme weather conditions are becoming more and more frequent in the crop years, thus increase the risk of sunflower production.
The objective of researches into plant production is to minimize these effects as much as possible. In this sense, the optimization of
agrotechnological factors is of high importance. Within these factors, the appropriate crop technology (sowing time, crop density)
and optimized, rational crop protection technologies are important, especially in the highly sensitive sunflower cultures. The effect of
sowing time, crop density, and fungicide treatments on the yield of sunflower hybrids was analysed in different crop years in 2008
and 2009. In each case, the infection was highest with the early sowing time and at the highest crop density level (65000 ha-1). When
one fungicide treatment was applied, the rate of infection decreased compared to the control treatment. The further decrease of the
infection rate was less after the second fungicide treatment.
In the humid year of 2008 the crop yield was the highest at 45000 ha-1 crop density level in the control treatment and at 55000 crop
ha-1 crop density level when fungicides were applied. In the draughty year of 2009 the maximum yield was gained at 55000 ha-1 crop
density level in the control treatment and at 65000 crop ha-1 when fungicides were applied. In 2008 and 2009 as regards the crop
yield, the difference between the optimal and minimal crop density levels was higher in the fungicide treatments than in the control
treatment (in 2008: control: 517 kg ha-1; one application of fungicides: 865 kg ha-1; two applications of fungicides: 842 kg ha-1), (in
2009: control: 577 kg ha-1; one application of fungicides: 761 kg ha-1; two applications of fungicides: 905 kg ha-1).
In each and every case, the first treatment with fungicides was more effective than the second. In 2008, the highest yield was
obtained with the third, late sowing time in each fungicide treatment. The differences between the crop yields with different sowing
times was less than in 2009, when the results of the second treatment exceeded those of the first and third treatment in each case. -
The role of non-optimum Fe-Zn ratio in the development of latent zinc shortage in cucumber (Cucumis sativus L.)
7-11Views:209The general micronutrient deficiency of the soils influences the quality of food production which causes human health problems in several countries as well. The non optimal Fe-Zn ratio can cause latent zinc deficiency – which the plants response in the function of their sensitivity –what has no visual symptoms or the plant shows deficiency symptoms in case of appropriate zinc supply. This phenomenon can cause significant decrease in the crop yield.
The aim of this study was to prove the role of non optimal Fe-Zn ratio in the evalution of latent zinc deficiency.
The non optimal Fe-Zn ratio caused decrease in the number of the leaves, the number and length of the internodes, the relative chlorophyll contents and in the dry matter production. According to the results the non optimal Fe-Zn ratio caused difficulties in the metabolism, which decreased the examined plant physiological parameters in the most cases. It can be concluded if there are higher iron contents in the tissues than zinc it can result latent zinc deficiency.
-
Changes of relative chlorophyll content at maize smut inoculated hybrids
55-58Views:538The leaf chlorophyll content analysis is important for several reasons. The natural or anthropogenic stressors directly effect on the chlorophyll content. Through the measurement of the chlorophyll content it is possible to obtain data concerning the physiological status of the plant, moreover the chlorophyll content is closely related to the nitrogen content, so it is linked to photosynthesis and the photosynthetic activity which determine biomass production.
One of the most common symptoms of plant diseases is the larger and smaller interveinal chlorotic areas. These might be local, or expand to the whole plant. There are multiply reasons of chlorosis such as reduction of chlorophyll content, unfavorable effects on the chlorophyll content,disorders regarding function of chloroplasts or ultimately destruction of the chloroplasts. Although such a chlorotic deviancy can contribute to significant losses in photosynthesis; however the underperformance photosynthesis of the sick plants is a more complex process.
As we unambiguously experienced during our investigations on common smut that the infected maize plants most common accompanying symptom was chlorosis on the leaves, so it is especially important to examine how the infection influenced on the chlorophyll content of different hybrids. -
The use of biogas in energetics
41-46Views:177In our study we examine the technical facilities of biogas production in the economic environment of a given region. The region can be considered as typical: it has animal farms, a poultry-processing plant with the characteristic problems of environment load and by-product handling. Biogas can be used for energetic purposes, and, in large scale, it can be sold as electric energy. The heat coming from the engine and the generator can be collected in heat exchangers and can be used for preparing hot water and for heating. One third of the gained energy is electric, two thirds are heat. The aim of the local owner and the economic management is to increase the rate of cost-effectiveness in general. We examined the tecnnical and economic conditions of establishing a biogas plant (using data of an existing pigfarm). We planned the biogas plant and calculated the expected investment and operational costs and return.
-
Nutrient deficiency and effects of various nutrition technologies on crop health
109-113Views:480The impacts of climate change on crop production are increasingly noticeable. Extreme weather conditions – such as devastating droughts, which occur more often – have serious effects on crop conditions, thus damaging their defence ability against pathogens and pests. Therefore, in order to achieve high-quality and high yielding crops, it is urgent to elaborate new technologies that improve general condition of crops and prevent development of nutrient diseases. Those crops which suffer from the lack of certain nutrients are more sensitive and their tolerance against diseases are decreased. Nitrogen – as the most influencing macronutrient in yield – is also essential in maintaining crop health. Nevertheless, due to the complicated processes in soil (such as leaching, denitrification), the utilization of nitrogen is not nearly complete, therefore nitrogen stabilizers may be needed to maximize this factor. The use of these stabilizers can be promising where plants with high nitrogen content are grown, although further experiments are needed in which impacts of nitrogen stabilizers on crop protection aspects are examined as well, since there is a close correlation between exaggerated nitrogen fertilizing and sensitivity to pests. During my research I am going to examine the combined effect of foliar fertilizer and nitrogen stabilizer on crop health. Furthermore, my goal is to find clear correlation between pathogens and the different technological variants of nutrition.
-
Plant production possibilities on a heavy metal contaminated soil with the purpose of biorefinery
215-222Views:217Significant part of not cultivated area of Hungary is not suitable for agricultural utilization because of industrial
pollution. Technologies of biorefinery make reutilization of contaminated areas possible. Biomass of plants
produced on polluted soils can be raw material of valuable products. Applicability of biorefinery was tested on a
heavy metal polluted soil, where the contamination originated from previous mining activity. Complete biomass
utilization was aimed to obtain cosmetic ingredients, pharmaceutical agents, and precursors. During our research
work 88 plant species and varieties were produced and tested for potential utilizable components. Levels of
possible contaminants in these plants were monitored, and amounts of carbohydrates, protein, organic acid and
cellulose were determined as well. Different plant extracts were tested as potential sources of biologically effective
components or as raw materials for lactic acid fermentation. Our results show that biorefinery is a real possibility
for utilization of polluted areas. Numerous plants could be cultivated on contaminated areas without increased
levels of contaminants in their tissues, thus they can be sources of valuable compounds. -
Examination of the effect of pelleted poultry manure products on a sunflower test plant in a laboratory model experiment
83-88Views:446Sunflower (Helianthus annuus L.) is one of the most important oil plants in Hungary, with a sown area of more than 627.000 ha in 2019. Sunflower cultivation is primarily important for use in the oil industry, but its role in feed and beekeeping cannot be neglected either. Sunflower adapts well to different production areas in terms of soil demand, yet, as important fact, it must be grown on soils with poorer conditions with intensive nutrient replenishment. From the agri-environmental point of view, in addition to the use of pelleted poultry manure products, which are also new to the consumer market, is of paramount importance. Their advantages include a wide range of nutrients as well as a soil structure improving effect.
In our research, we investigated the starter effect of pelleted poultry manure products applied at different doses (200 kg ha-1 and 400 kg ha-1) on sandy soil with humus using a sunflower plant. The aim of our research to investigate the effect of using pelleted fertilizer products as starter fertilizers on sunflower plant germination, and investigate the effect of poultry manure products on soils.
Based on our results, it can be stated that the pigment content (chlorophyll and carotenoid content) was positively influenced by the higher dose treatments (400 kg ha-1), thus increasing the photosynthetically active leaf area. Compared to the control, the carotenoid content in the test plants of the treatments increased, and the differences of this treatment proved to be significant (p<0.05). Our experiments supported the beneficial effect of pelleted poultry manure-based products in the soil-plant system.
-
The examination of the profit-making capacity of the wooden chip-based large-scale product path
21-26Views:209Heating with wooden chips would provide a significantly cheaper energy production alternative for the local governments in heating their facilities and in district heating as well. The raw material should be available in the appropriate quality, quantity and at the right time. This type of heating requires the well-organized and joint work of the forestry, transporting, processing and receiving plants. This activity might be realized in the form of non-profit clusters. In order not to suffer any losses, the participants of the product path should carry out a very careful planning regarding the factors appearing in heating with wood but missing from gas heating. One such critical element is the transportation distance which might make the basically cost-efficient wooden chip-based heating process significantly more expensive.
One of the main findings of my paper is that the transportation distance should be at most 23 kilometers for the wooden chips to be worth (economical) using against gas. From the viewpoint of practical use, this can be interpreted as the distance between the forestry and heatproducing units. By determining the constant and varying costs of transporting and chopping and from calculating the initial contribution, I concluded that the profit-making capacity of the product path would be sufficient for an energy-related investment. According to my calculations, by remaining within the economical transporting distance of 23 kilometers, such long-term savings might be achieved compared to gas heating which would partly cover the establishment of a biomass-based power plant or heating plant.
-
The analysis of the fair data of a solar energy power plant with SPSS
60-63Views:191The use of fossil energy sources greatly damages the environment. Moreover, the quantity of these energy sources is limited. Therefore, it is important to increase the share of renewable energy sources (solar, wind, water and biomass) in energy generation.
Huge amounts of energy (1100-1300 kWh/m2 per year) arrive at the earth from the sun, and are utilized in passive and active ways. One of the active applications is photovoltaic current production, in the course of which electricity is produced directly with PV – panels. This can be fed into a grid. At the University of Debrecen is a solar energy power plant from September 2005 in operation. The electricity performance of the incorporated PV-panels (Kyocera, Dunasolar, and Siemens) are 8.64 kW. The are of PV – panels is 110 square meter. With the aid of the data storage, the tension, current, temperature of the PV-panels, global radiation, air temperature, wind speed, wind direction and the achievement is measured by the ac network.
The effect of the shading on the performance of the PV – panels and the solar energy power plant is examined. The analysis and the graphic representation of the experiment results are carried out with SPSS per grief. We produced per grief. -
Comparative analysis of sample preparation methods to determine the concentration of arsenic in soil- and plant-samples
167-170Views:409Arsenic contamination of the fields and groundwater is a global problem. Alföld is the most affected area in Hungary. Irrigation witharsenic contaminated water, and crop production on the contaminated soil can cause a food safety problem, because arsenic is easy taken up by the cell of the plant roots. To prevent this, very important to monitoring the arsenic content of soils and plants. Inductively coupled plasma mass spectrometry (ICP-MS) is a fast, easy method to determined the concentration of minerals in the case of plant and soil samples The analytical methods can give reliable, results if the analytical process, including the sample preparation method, is the best. The objective of this study was to compare 3 type of sample preparation method which was dry ashing, wet digestion in open system, and microwave digestion. As a result of our experiement shows the microwave digestion is the appropriate method to determined the arsenic content of soil samples. In the case of plant samples we can use wet digestion in open system or microwave digestion as a samle preparation method.
-
The Influence of Cropyear on the Yield and Yield Safety of Different Sunflower Hybrids
68-73Views:390The effectiveness of plant production is basically influenced by the ecological, biological and agricultural technical factors. There are many kinds of sunflower hybrids which differres in their adaptability. If we want to increase the efficiency of sunflower production, we have to design different technologies for each hybrid. In the last decade, the range of sunflower hybrids increased exceedingly. This is the reason why we have to do experiments with them and examine what the relationship among genotypes, the environment and the hybrids is.
We made our experiments at the Látóképi Experimental Station of the University of Debrecen. We had 57 hybrids in 2001, and 44 in 2002 and 2003. We used only just those hybrids which were planted in every year.
In 2001 the months at summer were hot and the distribution of rainfall was extreme. In the beginning of the year 2002, the summer was also hot. During the abscessing period, the temperature was under the 30 years average and the rainless period was typical. In 2003, the temperature was extrame and the rainfall during the growing season was dry. The yield average which was determined after the three years in the very early group averaged 3998,9 kg/ha. The best hybrids were the LG 5385 (4273,3 kg/ha) and the Magóg (4134,4 kg/ha). The early group’s average was 4129,4 kg/ha. The best hybrid was the Astor in the early group. The middle group’s average was 4169 kg/ha and the Zoltán had a better yield than average (4238 kg/ha). In the confectionary group the Iregi szürke csíkos (3579,9 kg/ha) reached the best yield and it is above the average to it’s group (3225 kg/ha).
To estimate the results, we used factor analysis. Its results allow us to say that rainfall first and second part of June has a negative influence on yield. Aswith to the yield, yield safety is also important to know, which shows the adaptability of the hybrid.
After examining the CV% in the three years we can say that the most stable hybrids were in the very early group Samanta (10,94 CV%) and the LG 5385 (12 CV%) In the early group, the most reliable hybrids were Altesse RM (6,9 CV%) and the Astor (10,8 CV%) and the end in the middle group the Lympil (10 CV%) and in the confectionary group the Birdy (9,8 CV%) and IS 8004 (12 CV%) were the best.
After examining yield and yield safety, our conclusions are that in the Hajdúsági löszhát, the very early group LG 5385, early group Altesse RM, middle group Lympil and the parandial group IS 8004 hybrid had the highest yield and the best yield stability. -
Weed control possibilities of „energy willow” (Salix viminalis L.)
108-112Views:190In Spring 2005, the owner of the Szalka-Pig Ltd. of Mateszalka, decided to import the willow species Salix viminalis L. and to create a plantation for energy production purposes on the humid arable lands in his ownership. In 2006, he enlarged this area by 43 hectares. The owner further decided not only to plant this species on the more adherent (KA 70), but also onto the incoherent structured sand (KA 30-35). His main argument was that the cost of coal tar derivatives as energy sources was rapidly increasing in Hungary, so he needed to find a cheaper energy source for the drying of his products and for the heating of his buildings. He also planned to change his gas and oil heating equipment.
The willow’s cropping technology is being established in our country. One of our tasks is to work out an adequate weed control plan. The professional and safe use of herbicides can increase the success of production. In our paper, we discuss the data collected on treatments applied in the pre-emergent stage. The applied herbicide combinations (terbutilazin+S-metolaklór, mezotrion+ S-metolaklór, pendimetalin+S-metolaklór, oxyfluorfen+ S-metolaklór) yielded good results in large scale experiments. -
The use of Common duckweed (Lemna minor) as a biological filter in the rearing of hybrid African catfish (Clarias gariepinus x Heterobranchus longifilis)
107-112Views:488The African catfish (Clarias gariepinus x Heterobranchus longifilis) is one of the most important fish species in Hungarian aquaculture. The larvae and juveniles are reared at high feeding rates, which can reach up to 10% of the biomass. Intensive feeding results in large amounts of effluent water, directly proportional to the intensity of fish production. The aim of this experiment was to investigate the potential of Common duckweed (Lemna minor) as a biological filter and its nutrient removal capacity during intensive fry rearing of the hybrid African catfish. In a recent study, two experimental recirculation systems, identical in water volume and design, were set up, in one of which duckweed was grown under aquaponic conditions, where the concentrations of nitrogen and phosphorus forms were monitored and the production parameters of the fish were determined. The results obtained from the experiment showed that the use of duckweed as a biological filter improves the water quality of the recirculation system. A significant amount of plant biomass was produced, which mainly reduced the nitrate and orthophosphate concentrations in the system water. As a consequence, the survival of hybrid catfish was improved, which also affected biomass growth, but had no effect on other parameters.
-
The impact of cultivar and irrigation on yield, leaf surface temperature and SPAD readings of chili pepper
103-108Views:443Paprika is an extremely popular and widespread plant species in Hungary. Chili peppers belongs to paprika and it can be consumed fresh or processed. The production of peppers began with the cultivation and control of some parameters for good results of paprika production. The aim of this article is to compare the water supply of four chili pepper hybrids ("Habanero", "Hetényi Parázs", "Unikal" and "Unijol") by means of investigation on open field and to examine how different temperatures and water stress factors influence the yield of chili peppers. The experiment area consisted of four different hybrids in three different irrigation treatments (control, deficit- and regular irrigation). The chlorophyll content was estimated with SPAD and the leaf surface temperature with Raytek MX4 TD. Our research concluded that deficit irrigation produced the highest yields for all cultivars and the lowest yields for the highest water supply.
-
Previous data on the relationship between the intensity of pruning and the degree of damage in integrated and organic applegrowing systems
47-52Views:223In Hungary, fruit growers are increasingly interested in environmentally friendly growing methods, such as organic and integrated systems. Vital is the establishment of a strengthened system of cultivar-pruning-plant protection in production technology. Consequently, our aim was to examine the susceptibility of apple cultivars to diseases and pests and the effect of pruning technique on diseases and pests in organic and integrated growing systems.
Two pathogens (Venturia inaequalis, Podosphaera leucotricha) and two pests (Leucoptera malifoliella, Pannonychus ulmi) were observed in organic and integrated systems under „strong” and „weak” pruning techniques. Our results on six cultivars showed that the pathogens and pests infested the trees more in the organic system, as compared to that of integrated production. The pruning technique affected mainly the susceptible
cultivars to diseases and pests. The „weak” pruning technique caused a higher level of diseases and pests infestations than the „strong” pruning technique, especially in the organic growing system. The likely reason is that the shoots grow fast and powerfully under “strong” pruning technique. This supports better preservation of the trees supported by susceptibility of plant tissues to diseases and pests. -
Comparison of Scab Warning Systems in Integrated Apple Production
53-57Views:176In the present study, the suggestions for infection risk and sprays of the most frequently used PC-based scab warning systems (RIMpro and WELTE) and the conventionally used Mills table as a reference were compared in integrated apple production. The efficacy of the spraying programs based on the three different warning systems was evaluated by assessment of apple scab incidences during primary infection periods.
13 and 11 Mills infection periods were detected in 2000 and 2001, respectively, during primary infection periods (from 15 March until 5 June). Taking into consideration the heaviness of Mills infection periods, 11 and 9 sprays were applied in 2000 and 2001, respectively. The two PC-based scab warning systems detected 1-4 less infection periods and suggested 1-3 less sprayings compared to the numbers of infection periods and sprays according to the Mills table. Our results proved that the 9-11 sprays according to the Mills table could be reduced to 7-9 sprays by RIMpro scab warning systems which did not reduce the efficacy and did not increase the symptoms of leaf and fruit scab significantly. The WELTE scab warning systems detected generally one or two more infection periods and suggested one additional spray compared to RIMpro warnings and sprays. -
Possibilities of downsizing sweet cherry trees via growing techniques
71-74Views:269By applying smaller crown sizes and intensive growing techniques, many advantages can be identified compared to the extensive orchards. Also, nursing/pruning and harvest work can be performed more effectively. The outer and inner quality parameters of the fruit and the effectiveness of plant protection techniques are improved. The smaller crown size enables us to apply technologies for ensuring yield safety (e.g. hail, rain, bird nets), resulting in an increase in productivity. The introduction of smaller trees poses a great challenge to cherry production. Trials with dwarfing rootstocks have not yet been successful, therefore, we must use the cv. Mahaleb rootstock, which is excellently adapted to the Hungarian conditions, and also has a stronger growth. In addition, rootstocks with such strong growth are needed for the necessary regeneration of the productive parts of cherry cultivars, there is a need for. At the research garden of the University of Debrecen in Pallag, we planted 21 cherry cultivars on cv. Mahaleb (CT500) rootstock, in a 4 m x 1 m spacing pattern, in the spring of 2000. In our study, we demonstrated the possibilities of developing and maintaining the string super spindle through repeated summer pruning, in terms of growth, bud and fruit formation,. Based on these parameters, we determined which cultivars are the most suitable for intensive production.
-
The potential of biological control on invasive weed species
73-75Views:243Sorghum halepense is one of the invasive species in Europe. This study was made to identify the morphology of fungi on invasive weed species samples on the roots of Sorghum halepense. The samples were collected in the region of Debrecen. The experiment was conducted under laboratory conditions to determine the microscopic form of fungi. The samples were put on PDA and for identification of fungi is based on the morphological characteristics of the features and colonies of conidia that were developed in Petri dishes.
The examination of the culture revealed that the fungus from the root of Sorghum halepense was Aspergillus niger. Pathogenicity and the relationship between the fungus and Sorghum halepense are still uncertain so in the future pathogenicity tests and re-isolations from plants are very important steps.
-
Topology in the fruit plantation
253-257Views:431The localization of fruit trees, the topology of the branch structure and the spatial structure of the canopy are important to plan sitespecific agro-ecological and production technology projects in an orchard. The currently used instruments and technologies – in the precision agriculture – give opportunities to obtain these informations. The examinations were carried out in the Study and Regional Research Farm of the University of Debrecen near Pallag with the use of a GreenSeeker 505 Hand Held™ Optical Sensor Unit, and its interface the Trimble AgGPS FmX Integrated Display board computer. The collected spectral data were completed with the 3D point cloud by Leica ScanStation C10 laser scanner. The laser impulse data and the vegetation index values were integrated in a unified 3D system. The integration of the two special data collection system provides new opportunities in the development of precision production technology system. The results could be directly used in phytotechnology, water management, plant protection and harvesting in orchards. Our elaborated method can supply digital high spatial accuracy guidance data for development of the automated machines, which could provide some new developmental way in the immediate future.