Show Advanced search options Hide Advanced search options
The effect of sowing date and plant density in three maize hybrids germination and growth dynamics
Published February 18, 2016

The maize research was set up on chernozem soil at Látókép research area of the Centre for Agricultural Sciences University of Debrecen. We examined the following hybrids SY ARIOSO (FAO 300), P9486 (FAO360), DKC 4943 (FAO 410). The experience was set u pin three different plant density. These were 60, 76 and 90 thousand plant ha-1.... The experience was set up in three different sawing date, early, average and late. The germination and growing dynamic measurements was measured in three hybrid, three sawing date, three plant density in four replication. well observed at the first sawing date (April 5) the soil was too cold therefore the germination was begins very slowly to be slowly increased. The second sowing time was the average (April 21) there the germination launch as soon as possible more rapid growth in the amount of heat. We experienced the most intense germination was in the case of the emergence late sowing date (May 5). Looking at the growth dynamics for the first two sawing date was side by side and almost equal to the maximum value. This is explained by the adaptive capacity of the maize to compensate for the sawing difference. For the third time, despite the delayed sawing the maize began to grow more dynamically than in previous sawing times due to the results of the initial good conditions it growth faster than halted in the second half of the season because of the high temperatures and lack of precipitation.

Show full abstract
Laboratory and small plot fungicide trials to control potato late blight (Phytophthora infestans) next to Sepsiszentgyörgy town (Romania)
Published November 2, 2014

...5); font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial;">Our experiments were carried out during 2009 and 2010 years on Szépmező field, next to the Sepsiszentgyörgy town, Kovászna county, Romania. The experimental area situated at 520 - 580 m altitude, its soil is a humus rich chernozem, the yearly average temperature is between 7 - 8 oC, the precipitation is 500 - 600 mm/year. 7 different fungicides efficacy were studied for control to potato late blight disease caused by Phytophthora infestans on three potato varieties, viz. Ostara, Santé and Desirée.

In the laboratory the fluanizam (500 g/L, ALTIMA 500) fungicide was the best in inhibition of growing fungus while on the field trial plots cymoxanil + famoxadone (22.1 + 16.6%, EQUATION PRO WP*) and metalaxyl** + mancozeb (200 g/L + 1.600 g/L, RIDOMIL MZ 72WP) were the most effective. This facts were confirmed by statistic Duncan-test and data of yields.

The appearance of Phytophthora infestans epidemic was influenced by the climate conditions too during May and June when the minimum temperature was 12 oC, and the maximum 20 oC, the rain quantity more than 120 mm, the air humidity above 75%, these conditions promote the appearance and spread of fungus.

Show full abstract
Production technology development of millet at different ecological conditions
Published March 5, 2015

The millet is a very special plant with good adaptation that gives the possibility for the late sowing and secondary production. However the effects of late sowing modifies the efficiency of the agrotechnological elements. The exainations – focused on this aspect – was conducted in the DU RINY and DU RIK in small plots in four replications 2014. Among the examined factors (sowing time, nutrient supply, growing area) sowing time had the largest effect. The effectiveness of the agrotechnological elements decreases under unfavourable circumstances caused by the late sowing.

The agrotechnical elements modifies the yields in the examined genotype. Sowing time had the biggest effect on the yields of millet. The genotype „Maxi” had the highest yield in the different treatment variations.

The yield differences were significant between the sowing time and plant density variations, but the nutrient supply had not significant effect (the rate of precipitation was unfavourable in 2014 season).

Show full abstract
Analyses of a few physiological parameters of hybrid wheat in the case of different nitrogen supply levels
Published February 18, 2016

The winter wheat is one of the most determinant crops because its role was always important in human’s life. To increase the average yield there are several possibilities, which are still not clear fields of agricultural plant production. Our main goal was to examine the responses of winter wheat genotypes to different amounts of nitrogen sup...plies. The sowing area of hybrid wheats are increasing, they may have different nutrient nitrogen utilization compared to varieties, and the question arose if it is possible to achieve same yield at lower nitrogen fertilizer application or not.

The present study analyzes the results of winter wheat (Triticum aestivum L.) from tillering growing stage. Under controlled conditions three different wheat hybrids were grown (Hywin, Hystar, Hybiza) with two different amounts of nitrogen supplies (optimal and the fourth part). The dry matter accumulation, relative chlorophyll content and nitrogen content were measured in order to draw conclusions from the different supplies of nitrogen for winter wheat genotypes and their physiological plasticity.

Show full abstract
Evaluation of reaction to plant density of sunflower hybrids by regression and Kang’s stability analysis
Published December 21, 2008

The world production area and the total production of sunflower has significantly been growing. The harvested yield was 23.4 and 21.1 million ha in 2005 and 2001, respectively. The total sunflower seed production has also unexpectedly increased.
Although sunflower is produced on lower quality soils in Hungary, in 2005 the average harvested y...ield was 2.43 t ha-1, which was the highest in the world. 
Sunflower is a typical commercial plant and fits well in the crop structure. Since in terms of acreage the most significant crops are corn and cereals, the partial monoculture cultivation cannot be avoided. Sunflower production is a way to eliminate this problem, therefore it has an important role both in cultivation and ecological points of view.
Accordingly, sunflower has an important role in reducing the monoculture cultivation of some plants, as well as increasing biodiversity. Sunflower well adapts to Hungary’s climatic conditions and its production is easily practicable in our country.
The reaction of sunflower hybrids on crop density change is different. Some hybrids are more some are less sensitive to this parameter. In different crop years, the crop density optimums of the different genotypes are also different. In Hungary, the yield and quality is primarily determined by fungal infections, while viruses and bacteria are less important.
The research was conducted at the Látókép farm and Regional Research Institute of the University of Debrecen, Centre of Agricultural Sciences. The research institute is situated by Road 33,15 km from Debrecen in the Hajdúság. The duration of the experiment was seven years, 10 hybrids were examined in each year.
Two hybrids used every year, Aréna/PR and Alexandra/PR hybrids were tested by Kang’s stability analysis. We found that Alexandra/PR was most balanced at every levels of crop density. Both hybrids performed most stable yield at 65000 ha-1 crop density level and less balanced at 35000 ha-1 crop density level. As a result of improved environmental conditions, the yield increase of Aréna/PR was higher than that of Alexandra/PR.
Our regression analysis found that the maximum yield of Lympil, Louidor, Hysun 321, PR63A82 and PR64A63 hybrids were harvested at 47000-60000 plant ha-1 crop density level. The statistical analysis showed that the highest yield was harvested from Lympil and Hysun 321. As regards the crop yield, the most stable hybrids were Louidor and Lympil. The optimum crop density interval of Rigasol/PR and Larisol (58000 plant ha-1) was wider than that of Diabolo (46000 plant ha-1). The maximum yield of Larisol was higher at the optimal crop density level. As regards yield, Diabol was the most stable hybrid.
The statistical analysis on the stability of the yield of Alexandra/PR and Aréna/PR showed that Aréna/PR is more stable, and its optimal crop density level is lower than that of Alexandra/PR.

Show full abstract
Growth and clorophyll content dynamics of winter wheat (Triticum aestivum L.) in different cropyear
Published May 6, 2013

...5); font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial;">The experiments were carried out at the Látókép experimental station of the University of Debrecen on chernozem soil in a long term winter wheat experiment in the season of 2011 and 2012 in triculture (pea-wheat-maize) and biculture (wheat-maize) at three fertilisation levels (control, N50+P35K40, N150+P105K120). Two different cropyears were compared (2011 and 2012).

The research focused on the effects of forecrop and fertilisation on the Leaf Area Index, SPAD values and the amount of yield in two different cropyears. We wanted to find out how the examined parameters were affected by the cropyear and what the relationship was between these two parameters and the changes of the amount of yield.

Examining the effects of growing doses of fertilizers applied, results showed that yields increased significantly in both rotations until the N150+PK level in 2011 and 2012. By comparing the two years, results show that in 2011 there was a greater difference in yields between the rotations (7742 kg ha-1 at N150+PK in the biculture and 9830 kg ha-1 at N150+PK in the triculture). Though wheat yields following peas were greater in 2012, results equalized later on at N150+PK levels (8109–8203 kg ha-1).

Due to the favorable agrotechnical factors, the leaf and the effects of the treatments grown to a great extent in 2011, while in 2012 the differences between treatments were moderate. Until the N150+PK level, nitrogen fertilisation had a notable effect on the maximum amount of SPAD values (59.1 in the case of the biculture and 54.0 in the triculture). The highest SPAD values were measured at the end of May (during the time of flowering and grain filling) in the biculture. In the triculture, showed high SPAD values from the beginning. The same tendency could be observed in the 2012 cropyear, although increasing doses of fertilizers resulted in higher SPAD values until N150+PK level only from the second measurement. Maximum SPAD values were reached at the end of May in both crop rotation system

Show full abstract
Quality analysis of the near-infrared spectra of wheat samples
Published July 31, 2012

The near infrared spectroscopy is widely used in the different industries as a rapid, non-invasive analitical tool. It is suitable for identification, qualification and quantitative analysis as well. As this technique is indirect, to make accurate calibration equations we need a proper sample population. Before the quantitaive analysis, calibiration modells we have to collect and examine the spectra. In our study we examined wheat samples with known origins to find if there is any effect of the growing area on the NIR spectra.

Show full abstract
N-Phenyl-Phthalamic Acid and Fertilization Effects on Flowering, Fruit Set and Fruit Quality of Apple (Malus domestica Borkh.)
Published October 11, 2006

On seven apple cultivars (Gala Must, Gloster, Granny Smith, Idared, Jonagold, Jonathan Csány 1, Mutsu), the authors studied the influence of N-phenyl-phthalamic (PPA) acid and fertilization on flowering, fruit set and fruit quality in the years 2003-2004. The research results showed that PPA application extended the flowering time of the most ...cultivars. Fruit set of apple cultivars increased in many cases when regulator was applied. The additional nutrient supply could increase the fruit set too. The increase of fruit set increased the number of fruit per tree. Quality parameters determined by fertilization and fruit number per tree. For example, when N-phenyl-phthalamic acid was applied without fertilization the fruit number per tree increased considerably however, it caused a considerable frittering away. The reason for this is that fruit set was high and fruit received not enough nutrition for growing up. The skin colour of fruits was decreased in several cases by the treatments. In one respect the enlarged fruit number was shaded the others and the fertilization increased the vegetative shading leaf area.

Show full abstract
Evaluation of reduced tillage technologies in corn production based on soil and crop analyses
Published September 7, 2001

Despite new cultivation methods, the proportion of conventionally cultivated land is still very high in Hungary.
Although these technologies demand more time, labour and fuel, they are still attractive to users because they require less professional skill and simple machinery. In Hungary, conventional tillage methods usually lead to soil det...erioration, soil compaction and a decrease in organic content. These side effects have caused gradually strengthening economic and environmental problems.
The technologies for those plants which are dominant on Hungarian arable lands use (winter wheat, maize, sunflower and barley) need to be improved both in the interest of environmental protection and the reduction of cultivation costs.
The Department of Land Use at Debrecen University is cooperating with KITE Sc. to carry out soil tillage  experiments at two pilot locations to prove tillage technologies already used in the USA.
The aim of our examination is to adapt new technological developments and machinery, and to improve them on Hungarian soil for local environmental conditions. With these improved machines, the field growing of plants could be executed by less manipulation and better suited to economic and environmental needs. The most significant task is to investigate and improve the conventional cultivation replacing, new soil-protecting tillage technologies, and to apply no-till and mulch tillage systems.
On the basis of the experiments’ survey data, we established that the looseness and moisture content of the soil using reduced tillage is more favourable than after using conventional technologies. The results of no-till and shallow spring tillage are behind those of winter plough or disk ripper cultivation in corn yield and production elements.
To preserve moisture content in the soil, the ground clearing and sowing while simultaneously performing no-till method presents the most favourable results. The surplus moisture gained using no-till technology is equal to 40 mm precipitation.
Regarding the yield of winter wheat we established that the tillage methods do not affect plant yield. Both disk ripper and conventional disc cultivation showed nearly the same harvest results (5.55 or 5.5 t/ha), where the difference is statistically hardly verifiable from the no-till method. From the individual production of corn and the number of plants planted in unit area,  calculated results prove that no significant difference can be detected between the production of winter plough and disk ripper technology. Although the yield achieved with the no-till method is less than with the previously mentioned technologies, the difference is only 9-10%. We received the lowest production at shallow spring tillage.
Evaluations have shown a 1.1 t/ha (13%) difference in the yield of maize, between winter tillage and the disk ripper method, in this case the traditional method resulted in higher yield. In winter tillage, the yield of maize was 1.9-2.1 t/ha (23-25%) higher than in the case of direct sowing and cultivator treatments. No significant difference could be noted between the yields of direct sowing and cultivator treatments.
Our research so far has proved the industrial application of reduced tillage methods in crop cultivation technologies.

Show full abstract
An Efficient Method for Making an Educational Program
Published November 26, 2003

Distance education, a new teaching method widely-spread in higher education nowadays, requires the extent use of multimedia self-study educational programs besides the traditional means and methods.
Experience shows that besides certain types of software like encyclopedias, dictionaries, language manuals etc. there is an ever growing demand ...for appropriate educational programs that can be tailor made, adapted or modified for various kinds of students.
These programs reflect the teacher’s approach to the subject and contain the relevant, up-to-date information.
Since they are used in a relatively limited circle, usually within a faculty of an institution or within a single subject area, it is crucially important to be able to produce them with as little energy and time as possible.
There is a PhD research program, aiming at creating a flexible multimedia framework, that can be a possible solution to the problem. This framework can be easily filled with different teaching materials compiled by certain teachers without advanced knowledge of informatics. The framework itself is carefully designed and guarantees high quality.

Show full abstract
Rheological evaluation of industrial tomato
Published December 15, 2019

Today, tomato has the second largest harvesting area globally, and the fourth largest in Hungary. The importance of industrial tomato is growing year by year, and one of the most important tasks is to satisfy the needs of the industry. To meet these needs, the producer has to find the proper genotype, which can achieve up to 100 t ha-1...p> crop yield. This quality has high importance to be researched.

The experiment was carried out in the Botanical and Exhibition Garden of the University of Debrecen, with 3 examined genotypes. The planting date was 3 of May 2018. The harvesting was two-threaded. On 27 of July the physical parameters – fruit shape index (length/diameter), firmness (kg cm-2), water-soluble dry matter content (Brix%) and weight of the berries (g) – were evaluated. On 15 of August the rheological parameters were examined – the force needed to tear the skin – bioyield point (g) and flesh firmness (g).

The fruit shape index was oval (between 1.19 and 1.24) for all the examined genotypes. The firmness was between 0.92 (UG1122713 F1) and 1.05(Prestomech F1) kg cm-2, which compliance the needs of the industry. The water-soluble dry matter content was suitable, with a value between 4.49 (Prestomech F1) and 4.65 (UG1122713 F1) Brix%. The weight of the berries was between 45.94 (UG989 F1) and 49.37 (Prestomech F1) g per piece.

The bioyield point was between 76.00 (UG1122713 F1) and 85.16 (UG989 F1) g. The flesh firmness was between 33.68 (UG1122713 F1) and 42.81 (UG989 F1) g.

Finally, we can conclude based on the obtained data that the UG989 F1 hybrid was the most proper for the applied cultivation conditions. This genotype can be recommended for the farmers even in extreme weather conditions.

Show full abstract
Land use changes in suburban areas – case study of Lublin
Published November 13, 2012

The main reason to analyzing the space structure in the Lublin area is to determine the direction and pace of suburbanization in municipalities adjacent to Lublin, distinction factors and motives of population movements to the suburbs, complain rural-urban interaction and multifunctionality of land use. Housing development over the years was ac...companied by confusion in planning documents and the law. Changes in regulations on land use in 1994 and 2003 in Poland additionally deepened the negative situation. Local authorities failed to control the spontaneous process of suburbanization, which adversely affected not only the spatial structure of municipalities, but also on local relationship, landscape, land use and the former urban systems. The result are long-term problems associated with incompatibility rural areas to support a growing number of residents, such as failure of the social and technical infrastructure.

Show full abstract
Responses of pea (Pisum sativum L.) to the rising atmospheric concentration of carbon-dioxide
Published May 16, 2017

The atmospheric concentration of carbon dioxide increases from decade to decade in increasing pace. In 1957, atmospheric carbon dioxide levels were around 315 ppm, while in 2012 it amounted to 394.49 ppm concentration. In parallel, the global temperature is rising,which is projected to average 1.5–4.5 °C. The carbon dioxide concentration is ...a key factor – in interaction with the light – affects the plant's photosynthesis. Among the various factors significant interactions prevail: environmental factors affect - the growth and the development of plants, leaf area size and composition, the function of the photosynthetic apparatus, the duration of growing season.

Show full abstract
Application fields of wood as a renewable energy source in Europe
Published July 18, 2012

Fuelwood, and wood wastes provide almost half of the renewable energy production of the European Union. Enhancing the use of wood in renewable energy production has more constraint than wind- or solar energy. Forests in the EU member states are sustainably used, they are increasing both in terms of area, and growing stocks. There are possibilit...ies to enhance the fallings and use more fuelwood. Short rotation coppices could fulfill the long term demand for fuelwood; because these plantations surpass the dendromass yield of forests.

Show full abstract
Evaluating changes in nitrogen and sulphur content in a soil-plant system in a long-term fertilization experiment
Published December 1, 2020

The objective of this study was to evaluate the impact of long term NPK fertilization (considering that S containing superphosphate was supplied for 26 years of experiment, but since 9 years S has not used any longer) on sulphur- and nitrogen content and N/S ratio of winter wheat. The second objective of this work was to determine the of the amount of the different nitrogen and sulphur fraction in chernozem soil in a long term fertilization experiment. The third aim of the work was to determine if a relationship could be established between the studied parameters. Based on our results, it can be stated that the sulphur containing superphosphate supplied in the period of 1984-2010 has no longer significant effect on total sulphur content of plant in 2018. The NPK fertilization treatments had positive effect on total nitrogen content of winter wheat. In general, increasing NPK doses resulted in significantly higher nitrogen. The effect of irrigation applied in previous years has no statistically significant effect on the sulphur and nitrogen content of wheat. The wheat grain produced in our experiment, especially in fertilized treatments showed S deficiency. Analysing the changes of CaCl2 soluble nitrate-N and total N of the soil, it can be stated that the effect of increasing fertilizer doses clearly appears in these parameters, because the treatment with increasing fertilizer doses resulted higher CaCl2 soluble N forms compared to the control treatment in soil. These values increased until flowering stage of wheat and after that a slightly decrease was observed as a result of higher N uptake of plant. In overall, it can be stated, that the effect of superphosphate on measured sulphur fraction is prevailed. With increasing fertilizer doses higher sulphate content was detected in soil, but the sulphate content measured in different soil extractant is not enough for the wheat in this experiment area. Studying the correlation between the measured parameters of plant and soil, it can be concluded, that the relationships between nitrogen in the plant and in the soil is stable, and did not change during the growing season. The correlation between plant S and soil S varied in the measured periods and the r value was low in most cases. At the stage of flowering the highest r value was found between KCl-SO4 and plant S. In the stage of ripening the strongest correlation was detected between KH2PO4-SO4 and grain S content.

Show full abstract
Viticulture of Hungary
Published September 5, 2018

For several thousand years, vine has been grown in the Carpathian basin, where the climatic and soil conditions are favourable for viticulture. During this long period, vine growing has been developing until it reached its current niveau. We grow propagation material, table grape and wine grape. The produced wine grape varieties are grown on th...e largest area, of which 72% is white wine and 25% is red wine. Only 3% remains for table grapes. The surface of vineyards is about 63 000 ha, which can be found in 22 wine regions. The biodiversity of vine is very rich in our country. There are a lot of native and valuable bred varieties and clones in cultivation. The resistant and winter frost resistant vine varieties have an important role in our continental climate. The in 75% of the vineyards is on hills and mountains, 25% of them is on the Great Hungarian Plain. High cordon with cane pruning dominates the training and pruning system.

Unfortunately, vine stocks suffer from a lot of diseases and by using pesticides we pollute the nature. Viticulturists in Hungary produce excellent raw material and provide oenologists with them who make wine of excellent quality.

Show full abstract
Results of Sulphur Fertilization Experiment with Oilseed Rape
Published September 8, 2020

The rape is definitely a sulphur-demanding crop, which yield and the quality of its oil is threaten by the emerging shortage of sulphur nowadays. We made sulphur fertilising trials on two places in the northeastern rape growing area (in Felsőzsolca and Mezőkövesd), in the season 2001/2002. We compared the result the 5 five treating set in 2 ...repeats on brown forest soil with the results of the control plots. We used FitoHorm 32 S sulphur solution as sulphur fertiliser, with the dose of 3, 6 and 10 litres per hectare, as well as the joint effects of sulphur and boron; and the effect of boron alone. On the assessment of our results we looked for relation between the sulphur fertilising, the seed production, the oil content and the protein content.

Show full abstract
26 - 42 of 42 items
<< < 1 2