Search
Search Results
-
Adequate responses to plant protection policy
33-35Views:197The head of crop protection in the Central Agricultural Office offers a survey of the lately reconstructured official structure, outlines the sections of Central Directorate, sketches the roles of County Government Bureaues. To keep the standard of knowledge changes are necessary to make in the higher education of plant protection specialists. The prersentation will concern the contacts between researches made on universities and agricultural official directorates. It is analized the regulation of present and future pesticide usage, the possible alternatives of reduced quantity pesticide usage including the application of Integrated Plant Management (IPM) as well. The tasks of national activity according to the EU direcives about sustainable pesticide usage touch the problems of plant protection machinery and environment safety. It is summarized the tasks of official directorate, chamber of crop protection specialists, moreover practice of plant protection for the nearest future.
-
Establishing biotic stress tolerance of maize (Zea mays L.) by measuring hydroxamic acid contents
107-112Views:458Cyclic hydroxamic acids are the most considerable secondary metabolites in grasses and their main task is to protect these species from pathogens and pests. The cyclic hydroxamic acid content and common smut susceptibility were examined in our experiments. 27 maize hybrids were used for experimental plants in a climate room, where the plants were grown on a nutrient solution. An infiltration method was used for the inoculation of the plants. The total quantity of cyclic hydroxamic acids was determined and the ratio of infected plants and the ratio of inhibition was determined, too. Based on our results, on the basis of all hybrids’ data, the total hydroxamic acid content of the infected plants was higher than in the control. On the level of individual hybrids, only 9 of them had higher cyclic hydroxamic acid content in the case of infection. Increase in cyclic hydroxamic content induced by the fungus in this case is a tool for the fungus to suppress other pathogens and pests. Amongst the hybrids’ cyclic hydroxamic acid contents, significant differences were detected in the control and in the infected treatment, too. The so-called “sweetcorn” hybrids showed high level of cyclic hydroxamic acid content. According to the differences amongst hybrids, homogenous groups were created which groups differed in the case of control and infected treatment, because of the difference in increase of cyclic hydroxamic acid content. The examined hybrids showed different levels of infection and different rate of growth inhibition for the effect of inoculation. According to the infection caused damage hybrids were ranked. Infection caused notable damage for hybrids Prelude, Desszert 73, DKC5276 and DK440.
-
The roles of mycotoxins in cereal crops production: A comparative study of Hungary and Tanzania
151-159Views:745Although Hungary and Tanzania's climatic, soil, and technological conditions differ significantly in crop production, cereals crop cultivation is of paramount importance; maize crop dominates the cultivated area (Hungary 1 million ha, Tanzania 3 million ha) both from a feed and food point of view. Unfortunately, in both countries, fungal species (Fusaria, Aspergilli, Penicillia, etc.) that produce various mycotoxins on cereals, including maize grains, are a growing concern. The situation is complicated because these fungal species and their toxins can appear not only on cereals but also on other crops. Despite the prevalence of mycotoxins in both countries, studies show higher exposure risks and contamination above tolerable levels for human consumption in Tanzania to Hungary, with Tanzania observing acute aflatoxicosis.
-
Examination of plant number and sowing date in different crop years
79-82Views:210We examinated three agrotechnical factors in 2011, 2012 and 2013 (sowing time, nutrient factor and plant density), as well as five different effects of genotypes on the crop of corn, on brown soil in the Hajdúság. The experiment was set next to the 47 main road in Debrecen, at the 6th kilometre stone.
In the present processing I would like to touch on the effects of sowing time and plant density, as I do not have the chance to present the whole experiment results here. It is true for all three years that the humidity factors differ from the long years’ average, so the genotypes had different reactions on it. According to our results we found out that the late sowing time’s result had the most successful crop yield result with 9975 kg ha-1, while examining the plant density the result of the highest plant density proved to be the best with 9967 kg ha-1.
We take the critical season in corns’ life cycle process into consideration when examining the results: June, July and August months’ humidity and temperature markers. According to the results in the tested 3 months we had 227 mm humidity with 10 days, when the average temperature was over 25 °C. The same factors in 2012 were 135.5 mm humidity with 37 days of average temperatures of 25 °C and in 2013 we recorded 102.5 mm humidity with 24 of these days.
Our goal is to help the farmers in the Hajdúság with the results of our sowing times, hybrid choice and plant density results.
-
The effect of sowing date and plant density on the yield of maize (Zea mays L.) under different weather conditions
205-208Views:634Maize has high productivity and produces huge vegetative and generative phytomass, but this crop is very sensitive to agroecological (mainly to climatic, partly to pedological conditions) and agrotechnical circumstances. In Hungary, maize is grown on 1.1–1.2 million hectares, the national average yields vary between 4–7 t ha-1 depending on the year and the intensity of production technology. The longterm experiment was set up in 2015–2016 on chernozem soil in the Hajdúság (eastern Hungary). The maize research was set up on chernozem soil at the Látókép MÉK (Faculty of Agricultural and Food Sciences and Environmental Management) research area of the University of Debrecen. We examined the following commonly used hybrids of Hungary: SY ARIOSO (FAO 300), P9074 (FAO 310), P9486 (FAO 360), SY Octavius (FAO 400), GK Kenéz (FAO 410), DKC 4943 (FAO 410). The experiment was set up in three different plant densities. These were 60, 76, 90 thousand plant ha-1. The experiment was set up with three different sowing dates, early, average and late sowing. The yield was measured using a special plot harvester (Sampo Rosenlew 2010), measuring the weight of the harvested plot and also taking a sample from it. As a next step, we calculated the yield (t ha-1) of each plot at 14% of moisture content to compare them to each other. We evaluated the obtained data using Microsoft Excel 2015.
-
Effect of tillage practices, fertilizer treatments and crop rotation on yield of maize (Zea mays L.) hybrids
43-48Views:501This research was conducted at the University of Debrecen Látókép Research Station and is part of an ongoing long-term polyfactorial experiment. The impact of three tillage systems (Mouldboard plowing-MT, Strip tillage-ST, Ripper tillage-RT) and two levels of fertilizer treatments (N80 kg ha-1, N160 kg ha-1) along with a control (N0 kg ha-1) on the yield of maize hybrids (Armagnac- FAO 490 & Loupiac-FAO 380) cultivated in rotation with winter wheat was evaluated during a two-year period (2017–2018).
Amongst the three tillage treatments evaluated, ripper tillage (RT) had the highest average yield (10.14 t ha-1) followed by mouldboard tillage (MT) and strip tillage (ST) with 9.84 and 9.21 t ha-1 respectively. Yield difference between RT and MT was not significant (P>0.05), as compared to ST (P<0.05). Soil moisture content varied significantly with tillage practices and was highest in ST, followed by RT and MT (ST>RT>MT). Yield of RT was 7–9% higher than MT in monoculture plots, while MT reign superior in biculture plots (monoculture: RT>MT>ST; biculture: MT>RT>ST).
A positive interaction between tillage and fertilization was observed, with higher yield variation (CV=40.70) in the non-fertilized (N0) plots, compared to those which received the N80 (CV=19.50) and N160 kg ha-1 (CV=11.59) treatments.
Incremental yield gain from increase fertilizer dosages was significantly higher in monoculture, compared to biculture. There was no significant difference in yield between N160 and N80 in the biculture plots (12.29 vs 12.02 t ha-1). However, in monoculture plots, N160 yield was 23% higher than the N80 kg ha-1 (N160=11.74 vs N80=9.56 t ha-1).
Mean yield of maize in rotation with winter wheat was 28% (2.47 tons) higher than monoculture maize. The greatest benefit of crop rotation was observed in the control plots (N0) with an incremental yield gain of 4.39 tons ha-1 over monculture maize (9.92 vs 5.43 t ha-1).
Yield increased with higher fertilizer dosages in irrigated plots. Fertilizer application greatly increased the yield of maize and accounted for 48.9% of yield variances. The highest yield (11.92 t ha-1) was obtained with N160 kg ha-1 treatment, followed by N80 kg ha-1 (10.38 t ha-1) and N0 kg ha-1 (6.89 t ha-1) respectively.
Overall mean yield difference between the two hybrids was not statistically significant, however, yield of FAO 380 was 3.9% higher (9.06 vs. 8.72 t ha-1) than FAO 490 in monoculture plots, while in biculture plots, FAO 490 was 4.1% higher than FAO 380.
Average yield in 2018 was 13.6% (1.24 t ha-1) higher than 2017 for the same set of agrotechnical inputs, thus, highlighting the significant effect of cropyear.
Armagnac (FAO 490) cultivated in rotation with winter wheat, under ripper tillage and N80 kg ha-1 is the best combination of treatments for optimum yield.
-
Assessment of electrical conductivity and germinability of groundnut genotype seeds
5-10Views:592Seed quality affects crop establishment and productivity. In addition, the use of good-quality seed is an essential prerequisite for sustainable crop production including groundnuts. Assessing germinability and electrical conductivity provides early evidence of the production potential of a given crop variety or genotype. Therefore, this study assessed the germinability and electrical conductivity of seeds of three groundnut genotypes. A laboratory experiment arranged in a Completely Randomized Design (CRD), replicated three times, was conducted at the Faculty of Agriculture, Kyambogo University, in 2020. Seeds of Igola, Serenut 1, and Serenut 2 groundnut varieties were tested, and data was collected on germination percentage and electrical conductivity. Analysis of variance (ANOVA) was performed using GenStat and means were separated using the least significant difference test at a 5% probability level. Germination percentage and electrical conductivity significantly (p<0.05) differed among the groundnut varieties, with Igola recording the highest germination percentage, followed by Serenut 1, and the lowest was in Serenut 2. The highest electrical conductivity was recorded in Serenut 1 and the lowest in Igola. Since Igola had one of the lowest electrical conductivity and the highest germination percentage, it was concluded that Igola genotype retained higher quality attributes.
-
Mathematical modelling of surface irrigation for field crops in Jordan based on soil hydrological-physical properties
137-148Views:259Jordan suffers from drought and depletion of water resources. In-field crop management, the issue of irrigation scheduling is important and influential. In this research note, a simple method was developed for scheduling surface irrigation of field crops based on inputs of crop ecology, effective root depth, soil texture, soil hydrology, and logical mathematics. It was concluded that the science of mathematics has succeeded to meet academic irrigation scheduling in terms of surface irrigation for field crops based on both soil hydrological and physical traits. Extension scholar has a decision to choose mathematical irrigation model depends on the traditional inputs or updating the model by searching for renewable inputs such as different varieties root depths, optimum row spacing of each crop, drip irrigation mathematical modelling, and digital sensing. In both cases, the input related to the effective root depth is a major and basic factor in mathematical irrigation scheduling. It is, therefore, recommendable that extension research-based systems should focus on basic mathematics to capacitate the complementary role of academics, research, and extension in irrigation modelling, and rural development.
-
Test of the Plant Density Reaction of Genotype Sunflower Hybrids
113-119Views:529In order to produce sunflower in Hungary today it is important to develop hybrid-specific cropping technologies. The ever widening number of hybrids makes the constant examination of genotypes necessary from the viewpoint of genotype-environment interactions and critical elements. Plant density as a complex factor puts strain on the pathological features, yield and quality of sunflower. The experiment’s main objective is to find the optimal plant density for both the genotype and external factors.
As a result it can be stated that the optimal crop density is between 45,000-75,000 plant/ha. In 2001 the optimal density was 55,000 plant/ha. The Aréna PR and the Alexandra PR hybrids produced the greatest yields (3511 kgha-1; 3338 kgha-1). In the growing season of 2002, the yields were higher than in the previous year and the optimal crop density was 45,000-65,000 plant/ha. The best yields were produced by the Aréna PR and Alexandra PR hybrids in this year again (4102 kgha-1; 4267 kgha-1) and in 2003, 45,000-65,000 plant/ha proved to be the best crop density. The highest yield was produced by the Alexandra PR.
Analyzing the growing seasons of 2001, 2002 and 2003 it can be declared that as a result of dry climate of the three years yields were higher. It can be stated that the yield is decreased by higher than average of precipitation in the growing season. -
The effect of production area on the development of yield producing factors of maize (Zea mays L.) hybrids of different genotypes
67-72Views:276Maize yield amount development is determined by the given crop year and the genotype of the applied hybrid, but beside these also by the applied agrotechnical factors, in particular by sowing technology. The development of yield amount and yield producing factors of five maize hybrids of different genotypes has been studied in a small-plot field experiment by the application of different row spacings and plant density variants. The production of the individual plants shows decreasing tendency parallel to the increasing plant density, however, this decrement is compensated by the higher number of plants per unit production area. Individual plant production is determined by the development of yield producing factors, such as the length and the diameter of cobs, just as by the thousand seed weight – that were studied in the present research work as well.
In the present research work the decreasing row spacing resulted in a yield increment of 0.67 t ha-1 (4.53%) in 2013, while in contrast in 2014 yield was decreased by 1.75 t ha-1 (14.87%). The high amount of precipitation in March was determinant in 2013: it filled up the soil water stock and balanced the negative effect of the inadequate amount and distribution of precipitation during the vegetation period for the yield. Lower extent of yield increment (0.6 t ha-1) was registered in 2014 in case of the row spacing of 76 cm than in the previous year. In case of a row spacing of 45 cm the difference between the two crop years was 3.1 t ha-1. The highest impact on the yield production factors was found in all treatment combinations in case of the applied hybrid among the three studied treatment factors. In the crop year of 2014 the effect of plant density on cob diameter and thousand seed weight could be revealed as well. In case of the cob diameter significant difference was found between the plant densities of 70 000 and 90 000 plants ha-1, just as between the populations with densities of 50 000 and 90 000 plants ha-1. In case of the thousand seed weight significant differences could be found by the application of plant densities of 70 000 and 90 000 plants ha-1. The highest values of the studied yield producing factors were measured in case of the plant densities of 50 000 and 70 000 plants ha-1; increasing the plant density to 90 000 plants ha-1 resulted in rather decreasing values.
-
The Effect of Year and Irrigation on the Yield Quantity and Quality of the Potato
12-16Views:458In Hungary, the growing area of potato area reduced dramatically in the last few decades, additionally we are lagging behind the Western European countries as regards yields and the competitiveness of production is further decreased by the great alternation in yields from year to year, the unpredictable market conditions, bad consumption habits and many times unfortunately the lack of quality products.
The ecological and climatic conditions of Hungary are not everywhere suitable for potato, in the area of Debrecen the amount of rainfall was lower, and the monthly average temperature was higher than the requirement of potato in its growing season in 2002 and 2003.
The experiment was carried out at the experimental site of the University of Debrecen, Farm and Regional Research Institute, at Látókép. In our experiment we examined the yield and some quality parameters of 8 and 9 medium-early varieties in large parcels in 2002 and 2003 respectively. Out of the examined varieties 3 are of Dutch, and 6 are of Hungarian breeding.
The experiment was set up on 49.5 m2 parcels on calcareous chernozem soil after winter wheat as a forecrop in both years. The 9 varieties were examined in 4 repetitions in randomized blocks, out of which two repetitions were irrigated, and two were non-irrigated.
We examined the yields of the varieties, the distribution of tubers according to size and their percentages, and the changes in specific parameters of quality and inner content due to irrigation. We studied the dry matter content, the starch content, the under-water mass, the amount of reducing sugars, the colour index of frying and the element contents of tubers.
Summing up, it can be stated that among the agrotechnical year effect, variety and irrigation factors have considerable impact on potato yield quality and quantity. On the basis of our results, it can be stated that in potato production variety should be chosen in accordance with the aim of production and technology should be adapted to that specific variety. -
Quality management and traceability in crop production
273-277Views:551Today, food safety and quality is an everyday issue. Scandals in the food industry drew attention to the role and responsibility of food producers in the food chain. The European Union has set up a new integrated approach towards food safety, to which Hungary as an EU member and export-oriented country has also joined. The new “from farm to fork” principle states that food and feed production cannot be handled separately, as only feed produced from good quality raw materials can ensure safe food products. Another important issue is the traceability of products, allowing for the localization and recall of the defected item. In Hungary, there have been different documentation systems for tracking and tracing products, such as the land register in crop production, animal register in the livestock sector and hygiene registers in the food industry. In order to meet EU requirements, there is a growing number of initiatives to include primary production in the scope of food safety standards. The study introduces and compares the various management systems used in crop production.
-
Examination of Zn deficiency on some physiological parameters in case of maize and cucumber seedlings
5-9Views:212Zinc (Zn) is an essential micronutrient needed not only for people, but also crops. Almost half of the world’s cereal crops are deficient in
Zn, leading to poor crop yields. In fact, one-third (33%) of the world's population is at risk of Zn deficiency in rates, ranging from 4% to
73% depending on the given country. Zn deficiency in agricultural soils is also a major global problem affecting both crop yield and quality.
The Zn contents of soils in Hungary are medium or rather small. Generally, the rate of Zn deficiency is higher on sand, sandy loam or soil
types of large organic matter contents. High pH and calcium carbonate contents are the main reasons for the low availability of Zn for
plants (Karimian and Moafpouryan, 1999). It has been reported that the high-concentration application of phosphate fertilisers reduces Zn
availability (Khosgoftarmanesh et al., 2006). Areas with Zn deficiency are particularly extensive in Békés, Fejér and Tolna County in
Hungary, yet these areas feature topsoils of high organic matter contents. Usually, Zn is absorbed strongly in the upper part the soil, and it
has been observed that the uptakeable Zn contents of soil are lower than 1.4 mg kg-1.
Maize is one of the most important crops in Hungary, grown in the largest areas, and belongs to the most sensitive cultures to Zn
deficiency. Zn deficiency can causes serious damage in yield (as large as 80 %), especially in case of maize. On the other hand, Zn
deficiency can also cause serious reduction in the yields of dicots. One of the most important vegetables of canning industry is cucumber,
which is grown all over the world.
In this study, the effects of Zn deficiency have investigated on the growth of shoots and roots, relative and absolute chlorophyll contents,
fresh and dry matter accumulation, total root and shoot lengths, the leaf number and leaf area of test plants in laboratory. Experimental
plants used have been maize (Zea mays L. cv. Reseda sc.) and cucumber (Cucumis sativus L. cv. Delicatess). A monocot and dicot plant have
chosen a to investigate the effects of Zn deficiency, because they have different nutrient uptake mechanism.
It has been observed that the unfavourable effects of Zn deficiency have caused damage in some physiological parameters, and
significantly reduced the growth, chlorophyll contents of monocots and dicots alike. -
The Effect of Sowing Time and Plant Density on the Yield of MaizeHybrids
95-104Views:319The crop technology of maize has two important elements, sowing time and plant density. In 2003 and 2004 we studied the effect of these two factors on the growth and production of maize in an experiment carried out near Hajdúböszörmény.
The soil of the experimental plots was meadow soil.
Weather in both years was differed greatly. 2003 was drought. Neither the distribution nor the quantity of the precipitation were suitable in the growing season for maize. This fact basically determined the results.
In 2004, we could talk about a favorable and rainy season. The distribution and quantity of precipitation was suitable between April and September. The average temperature was also suitable for maize.
Results of the sowing time experiment:
In 2003, we tested seven hybrids at four sowing times. Hybrids in the early maturity group gave the highest yield at the later sowing time, while the hybrids of the long maturity group gave it at the earlier planting time. The yield of PR34B97, PR36N70, PR36M53 hybrids was the best at every planting time. The moisture loss of hybrids in the late maturity group was faster in the maturity season, but the seed moisture content was higher than the hybrids with early sowing time. The seed moisture content was very low due to the droughty year. In two hybrid cases, this value was higher than 20% only at the fourth sowing time.
In 2004, we examined the yield and seed moisture content of nine hybrids. In the favorable crop year, the yield of every hybrid was the highest at the second and third sowing time. Yields of PR34H31 and PR38B85 hybrids were significant. The seed moisture content at harvest was higher than the previous year due to the rainy season. In the case of hybrids sown later, this value was higher by 30%. However, we noticed that this value was lower at the earlier sowing time than at the later.
The crop year had a more dynamic effect on maize than the sowing time. First of all, the quantity and distribution of precipitation played an important role in respect to yield safety.
Results of the plant density experiment:
We tested the reaction of hybrids at four plant densities (45,000, 60,000, 75,000 and 90,000 stock/ha) every two years. In 2003, the tested seven hybrids reached the highest yield at the 90,000 stock/ha in the face of a droughty year. The effect of forecrop and favorable nutrients caused these results. In the rainy 2004 year, the yield grew linear with the growing plant density. The yield of the best hybrids were 14-15 t/ha at the 90,000 stock/ha.
Such a high plant density (90,000 stock/ha) couldn’t adaptable in farm conditions in rainy season. It is practical to determine the interval of plant density besides the optimum plant density of hybrids which gave correct yield. The farmers have to use the low value of this interval due to the frequent of the droughty years. -
Effect of cultivation factors on the yield and yield security of maize
263-265Views:381Cultivation factors have a significant effect on the yield and yield security of maize. Ensuring a suitable green crop is important. Tricultural crop rotation (pea–wheat–maize) in the average of 25 years provided a 2 t ha-1 higher yield compared to monocultural cultivation. A harmonious NPK nutriment supply determines yield and yield security, which can be especially realized by means of the application of precision cultivation technologies. Under average circumstances N 80 kg ha-1, P2O5 50 kg ha-1, K20 60 kg ha-1 active ingredient is the agro-ecological dosage of artificial fertilizer.
Plant density is a factor that determines yield. Optimal plant density – beside the genetic characteristics of the hybrid – is mostly influenced by the level of water and nutriment supply. -
Growth and clorophyll content dynamics of winter wheat (Triticum aestivum L.) in different cropyear
101-105Views:245The experiments were carried out at the Látókép experimental station of the University of Debrecen on chernozem soil in a long term winter wheat experiment in the season of 2011 and 2012 in triculture (pea-wheat-maize) and biculture (wheat-maize) at three fertilisation levels (control, N50+P35K40, N150+P105K120). Two different cropyears were compared (2011 and 2012).
The research focused on the effects of forecrop and fertilisation on the Leaf Area Index, SPAD values and the amount of yield in two different cropyears. We wanted to find out how the examined parameters were affected by the cropyear and what the relationship was between these two parameters and the changes of the amount of yield.
Examining the effects of growing doses of fertilizers applied, results showed that yields increased significantly in both rotations until the N150+PK level in 2011 and 2012. By comparing the two years, results show that in 2011 there was a greater difference in yields between the rotations (7742 kg ha-1 at N150+PK in the biculture and 9830 kg ha-1 at N150+PK in the triculture). Though wheat yields following peas were greater in 2012, results equalized later on at N150+PK levels (8109–8203 kg ha-1).
Due to the favorable agrotechnical factors, the leaf and the effects of the treatments grown to a great extent in 2011, while in 2012 the differences between treatments were moderate. Until the N150+PK level, nitrogen fertilisation had a notable effect on the maximum amount of SPAD values (59.1 in the case of the biculture and 54.0 in the triculture). The highest SPAD values were measured at the end of May (during the time of flowering and grain filling) in the biculture. In the triculture, showed high SPAD values from the beginning. The same tendency could be observed in the 2012 cropyear, although increasing doses of fertilizers resulted in higher SPAD values until N150+PK level only from the second measurement. Maximum SPAD values were reached at the end of May in both crop rotation system
-
Seed biology and possibility of improvement of seed germination capacity on Virginia mallow (Sida hermaphrodita L. Rusby)
71-76Views:280Sida hermephrodita or Virginia mallow is a perspective perennial herb in the Malvaceae family able to yield a biomass crop through the last two decades. Additionally, the plants have a lot of uses and benefits for instance it can use as a fodder crop, honey crop, ornamental plant in public gardens. It has favourable features like fast growing and resistance against the disease and climatic fluctuations, etc. Sida is in the beginning phase of domestication therefore it has a serious disadvantage: the low and slow germination as a big part of wild plants. Due to the expressly low germination percent the need of seed showing of driller is should tenfold, 200 thousand seeds/acre instead of 10–20 thousand what is not available and expensive Therefore practical purposes of our research of seed physiology was to increase the seed germination percent in a available, basically wild Sida population. In the first stage of our experiments we examined two factors relating to seed germination percent and seed germination power during our research: the influence of hot water treatment and the effect of exogenous or endogenous infection of seed. However, in our germination tests, utilizing scarified seeds with hot water (65 oC, 80 oC, 90 oC), from 29,3% to 46% germinated from those samples which were collected from the population of Sida hermaphrodita in Debrecen. The average germination for all season was 5–10% without treatment and rinsed using hot water up to almost 50%. When physically scarified used, the oldest seeds showed the best germination (46%) after the hot water operation in spite of the previous studies. We discovered that apparently there are close relationship between the seed fresh weight or water uptake capability and the percentage of infection. Following these recognition we modified our technique,in such a way that we fractionated the seeds based on their fresh weight/or relative density before we carried out the treatment. When we filtered the floating seeds on the surface of water, the hot water treatment was performed considerably better on the sunk seeds after separation. Therefore, by this special priming process we were able to reach 80% germination capacity of Virgina mallow seeds under laboratory conditions (26 oC without illumination).
-
Investigation of combining ability and superiority percentages for yield and some related traits in yellow maize using line × tester analysis
5-14Views:403Combining ability estimation is an important genetic attribute for maize breeders in anticipating improvement in productivity via hybridization and selection. This research was carried out to investigate the genetic structure of the 27 F1 maize hybrids established from nine lines derived from Maize Research Department and three testers, to determine general combining ability (GCA), determine crosses showing specific combining ability (SCA) and superiority percentages for crosses. Nine lines, three testers, 27 F1 hybrids and two check commercial hybrids (SC162 and SC168) were studied in randomized complete block Design (RCBD) with three replications during 2016. The results of mean squares showed that significant and highly significant for most studied traits (days to 50% tasseling, days to 50% silking, plant and ear height, ear position, ear length, no. of kernels per row, 100-kernel weight and Grain yield). Estimates of variance due to GCA and SCA and their ratio revealed predominantly non-additive gene effects for all studied traits. Lines with the best GCA effects were: P2 (line 11) and P6 (line 21) for grain yield, for testers Gm174 and Gm1021 had significant GCA effects for grain yield. The hybrids P5×Gm1021, P6×Gm1021, P7×Gm1021, P8×Gm1002, P9×Gm1002 had significant and negative SCA effects for grain yield. Crosses P1×Gm174, P2×Gm1002, P5×Gm1021, P6×Gm174, P6×Gm1021, P7×Gm1021, P8×Gm1002, P9×Gm1021 were the best combinations manifested and significant superiority percentages over than check varieties (SC162 and SC168) for most studied traits. Therefore, these hybrids may be preferred for hybrid crop development.
Abbreviations: GCA general combining ability; SCA specific combining ability
-
Examination of nutrient reaction of winter wheat after sunflower forecrop
9-13Views:274We tested the fertilizer reaction of four different winter wheat varieties in three different crop years, on chernozem soil, in long-term experiment. We examined the optimum fertilizer requirements and the maximum yield of the varieties. According to our results there were significant differences among the years: the yield of the winter wheat varieties changed between 1.4–6.1 t ha-1 in 2013, 3.8–8.6 t ha-1 in 2014 and 3.2–8.6 t ha-1 in 2015. The yield increasing effect of fertilization was significantly different in the tested years. The optimum level of fertilization was determined by, besides the genetic differences among the varieties, the crop year and the extent of fertilization. In milder winter months, due to the higher average temperatures, yields of winter wheat increased compared to an average crop year.
-
Economic Aspects of Winter Wheat and Sunflower Production Under Organic Farming Methods
256-261Views:189On the basis of data from selected organic crop producing farms around Hortobagy and a significant conventional agricultural enterprise, the efficiency calculation of two important crops, winter wheat and sunflower were compared to each other, according to the organic and the conventional farming methods. The analysis was carried out on the basis of data of the year 2002, helped by the calculation and the comparison of the efficiency indexes. According to the results, the organic winter wheat was more highly profitable in 2002 than the conventional one, and this is because the price ratio of the two was quite high, however the yields and the production costs per hectare were almost on the same level. Considering the sunflower, organic farming was less productive than the conventional one in 2002, as the average yield in the examined organic farms was significantly lower than under the conventional farming method, and this was not compensated by the extra price for the organic crop product.
-
Researches regarding the influence of the some technological elements on water use efficiency in maize from Crisurilor Plain
5-9Views:298Plain and the influence of the hybrid, plant density, crop rotation, nutrient supply, weeds and irrigation on water use efficiency were studied.
Choosing of the hybrid with the best water use efficiency is very important because a hybrid from 500–600 FAO group (Fundulea 376) in unirrigated conditions and a hybrid from FAO group over 600 (Fundulea 365) obtained the biggest water use efficiency; the hybrid Fundulea 365 obtained the highest irrigation water use efficiency, 20.1 kg yield gain 1 mm-1 irrigation water.
One of the most known hybrid in the area is Turda super and the highest water use efficiency was obtained using the plant density of 55 000 plants/ha in unirrigated variant and 70 000 plants/ha in irrigated variant. The highest irrigation water use efficiency, 20.7 kg yield gain 1 mm-1, was obtained at 70 000 plants ha-1.
In maize monoculture was obtained the lowest values of the water use efficiency in unirrigated and irrigated variant: in the wheat-maize crop rotation the values were higher than in maize monoculture and in the wheat-maize-soybean were registered the highest values. The same situation was registered regarding the irrigation water use efficiency.
Farm manure (30 t ha-1) and especially manure (30 t ha-1) +chemical fertilizers (N90P45) determined a higher values of the water use efficiency in comparison with the control. In the variant with organic + mineral fertilization was registered the higher value (19.4 kg yield gain mm-1) of the irrigation water use efficiency.
Water use efficiency was much lower in the variant with weeds in comparison with the variant without the weeds; the differences were of 69% in unirrigated variant and of 64% in irrigated variant, very significant statistically. Irrigation water use efficiency from variant with weeds was lower than the value registered in the variant without weeds; the difference (68%) was very significant statistically.
In average in period 1976–2012, the irrigation determined the increasing in water use efficiency with 22%, 19.4 kg mm-1 vs. 15.8 kg mm-1, but not in all the years caused the irrigation increasing in water use efficiency in comparison with unirrigated maize.
The results research emphasized the need of the optimization for technology elements studied and a better water use efficiency will be obtained.
-
Effect of sufficient and deficit irrigation with different salt inputs on the yield of cucumber
19-25Views:317Soil salinisation is considered one of the major environmental hazards threatening agricultural productivity and can be accentuated by climate change as well as the use of low-quality water in irrigation. This is the case in our study area which is affected by secondary salinisation due to the use of saline irrigation water for horticultural production. Deficit irrigation technique is implemented especially in arid and semiarid regions due to its potential to optimise water productivity while maintaining or increasing crop yield. The main objective of this study was to compare the effect of irrigation with sufficient (SD) and deficit (DD) doses. This research was carried out in Karcag in 2020. Cucumber was grown on a meadow chernozem soil and was irrigated with SD and DD of two irrigation water qualities. Soil moisture was monitored and crop yields were recorded. Despite the differences in quality and quantity of water, the application of less water by DD maintained the same yield as SD. We found a non-significant difference between the average soil moisture contents under the treatments (15.5 v/v% for SD and 13.5 v/v% for DD). Deficit irrigation can be an efficient technique due to its potential for improving water use efficiency, maintaining sufficient soil moisture content favourable for proper crop development and yield.
-
Productivity and Nutrient Reaction of Maize Hybrids
78-83Views:336Several factors influence the quantity and stability of maize yield, the most important being the nutrient supply, the hybrid and precipitation. In 2004, during the maize growing season the precipitation was more than the 30 year’s average, with 68.3 mm, but the distribution was unfavorable. The experiment was carried out in Debrecen at the Experimental Station of the University of Debrecen Centre of Agricultural Sciences, Department of Crop Production and Applied Ecology. We tested 10 various hybrids with their own genetic characteristics for five different fertilizer doses, in addition to the parcels without fertilization.
The favorable results reached were due to the rainy season. The average yield varied between 7.78-9.67 tha-1. The DK 440, PR37M34, PR38A24, PR39D81 and PR36R10 of the hybrids reacted to higher fertilizer doses with significant growth yields, the yield (more than 11 tha-1) was the highest for N200, P125, K150 fertilizing. The other hybrids, DKC 5211, Mv Vilma and MV Maraton, gave similar results at the N120+PK fertilizer dose and the ensuing doses depressed the yield. Fertilization was more effective thanks to the precipitation. The fourth and fifth dose increased or decreased maize yield depending on the nutrient reaction of the hybrid. The agro-ecological optimum of NPK fertilization was N120, P75, K90 kgha-1.
During the experiment we tested the moisture loss of five hybrids. The rainy crop year’s effect on the seed moisture content at harvest was higher than in previous years. The seed moisture content hybrids at harvest which have shorter crop years (FAO 300) was 18-19%, and hybrids with longer vegetation periods had more than 20% seed moisture content. DK 440 hybrid had the intensive moisture loss of the five hybrids, at the start of the measurement, the seed moisture content was higher than 40%, and it decreased to 18.6% by harvesting. -
Effects of different crop years and sowing date on maize yield
93-96Views:343We carried out the tests in the flood meadow soil formed on the alluvial cone of Nagykereki, Sebes-Körös belonging to the Bihar plane small region. The aim of the study was to analyse the effect of the different sowing date of maize on the yield trend based on a comprehensive study conducted for 6 years (2007–2012).
The sowing date of maize hybrids is a factor that significantly influences yield, however, its effect is not significant in each crop year. In the years when the date of sowing has a modifying effect, the reliable yield level can be reached with optimal sowing date management (24 April).
The advantage of early sowing (10 April) proved to be dominant in the year of 2012, the seeds were placed into the still wet soil therefore shooting was more balanced. Maize seeds sown at the time of optimal (24 April) and late (10 May) sowing dates were placed into the already dry soil, which deteriorated germination and the strength of early initial development that had an effect on the yield.
-
Possibilities of Weed Beet (Beta vulgaris, L. ssp. marritima) Regulation
133-136Views:169Weed infestation regulation in sugar beet belongs to the most difficult growing measures, the aim of our work was to find out, if active substances contained in preparations Roundup and Fazor influence number, weight and germination of clusters in plants of weed beets. Statistically significant differences in germinability were found among control and all variants in which preparation Fazor was applied. The Roundup treatment did not have significant influence on germination. Presented results are only preliminary and one-year results, more experiments are necessary to determine the effects of the studied applications.