Search



Show Advanced search options Hide Advanced search options
The effect of fertilization and plant protection in sunflower (Helianthus annuus L.) production
Published December 15, 2019
57-63

 Sunflower is the most important oil crop in Europe which is grown on the biggest area of all the oil crops. The area of producing sunflowers in Hungary was changing to 524–704 thousand hectares in the past decade in comparison with approximately 100 thousand hectares in the 1970’s. In our experiment different sunflowe...r hybrids were examined. The doses of fertilizers were the following in 2017 and 2018: 0–30–90–150 kg ha-1 N, 0-50-90-90 kg ha-1 P2O5 and 0–70–110–110 kg ha-1 K2O. Three different treatments of plant protection were used in the experiment to protect them from fungal infections. A rise in the dosage of nitrogen resulted in increasing infection. The biggest fungal infection was identified in 150 kg ha-1 N, 90 kg ha-1 P2O5 and 110 kg ha-1 K2O treatment. The largest infection was measured on plots without plant protection at the highest N doses, both in leaf and disc diseases. We measured the highest 41.25% in 2017 and 53.1% in 2018 Diaporthe helianthi infection, and 24.5% in 2017 and 25.5 % in 2018 Sclerotinia sclerotiorum disc infection in these plots. kg ha-1

Average yield was changing between 2.96–4.67 t ha-1 in 2017/2018. The lowest yield was obtained in the absolute control plot (without plant protection and without nutrient) in both years, which was 2.96 t ha-1 in 2017 and 3.14 t ha-1. The yields increased due to growing nutrient supply and excellent plant protection. The highest yields were 3.67 t ha-1 in 2017 and 4.67 t ha-1 in 2018 (150 kg ha-1 N, 90 kg ha-1 P2O5 and 110 kg K2O active substance). Purpose of the experiment at analysing the impact of different treatments on the profitability of sunflower production.

 

Show full abstract
106
65
Examination the effects of different herbicides on the soil microorganisms of a calcareous chernozem
Published November 3, 2010
121-126

Pesticides play a key role in fighting weeds, pests and parasitic fungi. According to surveys, pests reduce the yield of agricultural crops by 35% worldwide. Pests, fungi and weeds account for 14%, 12% and 9% yield loss, respectively (Gáborjányi et al., 1995). Chemicals have contributed to increasing and maintaining the yields of crop product...ion for decades. Today, agricultural production (in spite of many efforts) is unthinkable without the use of pesticides (herbicides, insecticides and fungicides). On the other hand, these chemicals contribute to the pollution of the atmosphere, surface and underground waters, and agricultural soils, especially if they are applied improperly.
The sustainable agricultural production pays attention to environment-friendly cultivation-technologies; but at the same time it makes an effort to produce good quality and economical products. The examination of the herbicides’ secondary effects, fits into this chain of idas namely, how the herbicides affect – stimulating or inhibiting – the soil microbiological processes, prevention of soil fertility.
In the course of the experimental work the effect of herbicides on soil biological properties were examined in different maize (Zea mays) cultures. We wanted wished to know that how the herbicides affect the quantity change of soil microorganisms, the life of different physiological groups of bacteria and the activity of microorganisms. A small pot experiment was set up in 2008 with the application of two herbicides - Acenit A 880 EC and Merlin 480 SC – in the breeding house of the Department. The moisture content and nutrient supply were at optimal level in the experiment.
On the basis of results the following can be stated: 
1. It can be stated that the two herbicides and all their doses affected negatively the number of total soil bacteria, the
inhibiting effects were significant. The quantity of microscopical fungi increased by the effect of Merlin 480 SC and decreased in the treatments of Acenit A 880 EC.
2. The Acenit A 880 EC had stimulating effect on the nitrate mobilization. The CO2-production was stimulated by the basic doses of herbicides; the other treatments did not influence the CO2-production significantly.
3. The quantity of microbial biomass-carbon –except for only one treatment- decreased significantly by the effect of herbicides. Besides it, the quantity of microbial biomass-nitrogen increased significantly in the treatments of Acenit A 880 EC.
4. The biomass of test plant decreased in the treatments of herbicides, their quantities were smaller than in the control. In the pots treated by Merlin 480 SC, parallel with the increase of doses decreased the quantity of plant-biomass.

Show full abstract
31
40
Change of cultivation parameters of asparagus (Asparagus officinalis L.) on different nutrient systems
Published September 18, 2014
67-71

...5); font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial;">The experiments were conducted at the Research Institute of Nyíregyháza, Research Institutes and Study Farm, Centre for Agricultural Sciences, University of Debrecen. We have studied the shoot number, plant height and fold thickness os asparagus for 3 years. We have set a fertilization experiment on 1500 m2 of plantations in 2013. We applied fertilizer, manure and sheet manure compost. The set yield we achieved by using fertilizer treatment. The Vitalim produced the largest crop, then the Cumulus and the lowest yield Grolim. We was produced by highest green mass was observed in Vitalim and Cumulus hybrids in each year. The Grolim hybrid produced the smallest shoot and plant height but the fold thickness was longer in the other two hybrids. Overall, the Vitalim hybrid has the best production parameters and each season.

Show full abstract
73
99
Environmental Consequences of Efficient Use of Nitrogen Fertilizers
Published May 12, 2002
41-46

Nitrogen fertilizer represents major economic burden. For this reason, although the efficiency of nitrogen utilization varies highly, its actual use generally remains at low levels; these averaging between 25 and 50%. We set up an experiment at the Oradea Research Station, using 15N labeled fertilizers, in order to investigate the possibility o...f increasing N fertilizer efficiency in winter wheat under irrigation conditions.
Fertilizers labeled with 15N allows us to individually determine its effect on yield formation, as well as the use efficiency of N from fertilizer following application rate and time. The amount of N derived from fertilizer as determined in straw and grain yield is high. When the labeled fertilizer is applied at tillering time, the values of this indicator rise when higher N levels we applied.
In separate experiments, we investigated a series of aspects connected to chemical fertilizer regarding the determination of the type of fertilizer, optimum time and rates of application; all these as a function of the special pedoclimatic conditions.
The results obtained in the field show that the effectiveness of N utilization in wheat is most variable and generally low, often ranging between 25 and 33%, owing to N loss within the system through leaching and NH3 volatilization.
A readily achievable increase in efficiency of 5 percentage points would result in considerable savings, and can be brought about by reducing nitrogen losses. The added benefits to the environment in terms of reduced ground/water contamination and lowered nitrous oxide (N20) emissions would also be substantial.
The figures for N fertilizer use efficiency (% N range from 35.5 to 72.6, the highest value being recorded with an N application of 120 kg/ha at tillering, when the previous crop was sunflower).
INTRODUCTION

Show full abstract
28
34
Effects of the cropyear and the agronomical factors on agronomical elements of different sweet corn (Zea Mays L. convar. saccharata Koern.) genotypes in long-term experiment
Published December 16, 2012
105-110

In the crop season of 2010 (rainy year), we studied the effect of three agrotechnical factors (sowing time, fertilization, plant density) and four different genotypes on the agronomical characteristics of sweet corn on chernozem soil in the Hajdúság. The experiments were carried out at the Látókép Experimental Farm of the University of Deb...recen. In the experiment, two sowing dates (27 April, 26 May), six fertilization levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and four genotypes (Jumbo, Enterprise, Prelude, Box-R) were used at two plant densities (45 thousand plants ha-1, 65 thousand plants ha-1). The amount of precipitation in the season of 2010 was 184 mm higher, while the average temperature was 0.8 oC higher in the studied months than the average of 30 years. Weather was more favourable for sweet maize at the first sowing date, if we consider the yields, however, if we evaluate the agronomical data and yield elements (number of cobs, cob length and diameter, the number of kernel rows, the number of kernels per row) it can be stated that the size of the fertile cobs was greater at the second sowing date due to the lower number of cobs. The largest number of fertile cobs was harvested in the case of the hybrid Enterprise (72367.9 ha-1) in the higher plant density treatment (65 thousand ha-1) at the fertilization level of N120+PK when the first sowing date was applied. The largest cobs were harvested from the hybrid Box-R (cob weight with husks: 516.7 g, number of kernels in one row: 45.7) at the lower plant density (45 thousand plants ha-1) in the second sowing date treatment. Cob diameter and the number of kernel rows were the highest for the hybrid Prelude.

Show full abstract
50
66
Testing disease resistance in autumn wheat genotypes by means of field experiments
Published September 7, 2001
30-40

According to our scientific results we can state that we have to use integrated pesticides management in crop protection against the diseases of winter wheat. One of the most important elements of IPM is to select a genotype characterised by good resistance to diseases (and by high yield ability and excellent baking quality). It is especially i...mportant that the wheat variety have tolerance against not only to one or two leaf and spike (grain) diseases, but „complex” tolerance. It is not necessary to give up the growing of a variety which has susceptibility to different diseases because we can protect it using appropriate chemical management. In the intensive growing stage of wheat (BBCH 32-37) we can use a noncompulsary fungicide-treatment (depending on e. g. the infection, ecological conditions) and, at the beginning of the flowering stage
(BBCH 59-65), we have to use a compulsary fungicide-treatment (in spite of e. g. special weather conditions, resistance genotype)to ensure high yield and good quality.

Show full abstract
34
36
Effects of combined nutrient supply treatments on some physiological parameters of autumn wheat
Published September 5, 2018
241-251

The Fleischmann Rudolf Research Institute in Kompolt is not only famous for plant breeding but the institute also surveys the effects of different nutrient supply methods since 1918. In 2017, we joined this research supported by EFOP 3.6.1 project. Our aim was to investigate photochemical processes – which is one of the most determinant in ca...se of yield – of crops by in vivo field measurements. We measured the chlorophyll content of leaves using Minolta SPAD 502. We used miniPAM fluorometer to determine actual photochemical efficiency and non-photochemical quenching of PSII during natural light conditions and also to evaluate the pigment (chlorophylls and carotenoids) and water content of leaves we applied field spectrophotometer (ASD FieldSpecPro 3). We utilized these methods by various treatments (1. treatment with soil bacteria + head and base fertilizer; 2. treated by only head fertilizer; 3. treated by only base-fertilizer) in field experiment of autumn wheat (4.1–2.43–1.19 ha) in June, 2017. The difference between treatments was clearly detectable. In the case of the first treatment, physiological processes were more intense and the ripening occurred earlier. The obtained yield was the highest in the case of the area treated by soil bacterial. Based on the results, the first treatment can be recommended in practice.

Show full abstract
86
83
Foliar treatments of Sugar beet
Published November 15, 2007
55-59

The yield and quality of the sugar beet are mainly determined by the plant production system, thus we studied the effect of mineral fertilization. Our field trials were carried out in 2005 and 2006 in Hajdúböszörmény, at two sites. We studied the effect of sulphur (Cosavet DF), copper (Kelcare Cu) and two foliar nutrients with high active a...gents. Treatments were replicated four times.
We took root and leaf samples at 4 week intervals, starting in August. The quality of root (sucrose, potassium, sodium and alfaamino N content) was determined from filtrated beet broth, by an automatic beet laboratory system, called VENEMA. Leaf samples were measured with ICP-OES.
We found that the crop and the sugar yield were significantly influenced by the foliar treatments. 

Show full abstract
40
36
Analysis of different fertilization settings’ effect in the case of the summer savory’s (Satureja hortensis L.) yield and active agents
Published June 30, 2018
101-105
During our research we investigated the Mediterranean summer savory’s (Satureja hortensis L.) nutrient requirement with different fertilization settings in a small plot trial. We measured the medicinal plant’s raw and dry drug mass, and the presence of the main essential oil active agents under the different f...ertilization settings using SPME (Solid phase microextraction) and GC-MS (Gas Chromatograph mass spectrometer).
From the drug’s raw and dry mass perspective, based on the obtained results, in our opinion, the N30P40K60 nutrient requirements were ideal in 2015, while the N60P80K120 nutrient requirement showed the best values in 2016. A significant relationship is assumed between the different fertilization settings and the essential oil active agents’ distribution. During the analysis of data, we compared three of the savory’s essential oil active agents’ percentage of presence in the nutrient requirement samples.
Show full abstract
99
87
Challenges and agroecological approaches in crop production
Published September 5, 2018
75-89

Never has the need been greater for an ecosystem approach to agriculture. As our global population exceeds 9 billion in the next 30 years, with a concomitant demand for agricultural products, ever more pressure will be placed on our agricultural systems. Meanwhile, climate change is altering the ecological settings in which agriculture is pract...iced, demanding adaptation. Knowledge generated by long-term research will help to address one of the grand challenges of our time: how to meet sustainably the growing world demand for agricultural products – in a way that minimizes environmental harm and enhances the delivery of a diverse array of ecosystem services.

Show full abstract
104
74
The effects of drought stress on soybean (Glycine max (L.) Merr.) growth, physiology and quality – Review
Published May 16, 2017
19-24

Abiotic stresses are one of the most limiting factors inhibit plant's growth, leading to a serious production loss. Drought stress is one of the most destructive abiotic stresses and is still increasing year after year resulting in serious yield losses in many regions of the world,
consequently, affecting world’s food security for the incr...easing world population. Soybean is an important grain legume. It is one of the five major crops in the world, an essential source of oil, protein, macronutrients and minerals, and it is known as the main source of plant oil and protein. Harvested area of soybean is increasing globally year after year. However, soybean is the highest drought stress sensitive crop, the water deficit influences the physiology, production and seed composition of this crop. We introduce a review for literatures concerning the changes of the above traits of soybean exposed to drought stress, with past explanations for these changes.

Show full abstract
99
92
Variability examination of photosynthetic pigment content and specific leaf area in individual maize (Zea mays L.) plants
Published June 30, 2018
153-157

Currently, maize is one of the most important crops (Zea mays L.) both globally and in Hungary. We compared physiological parameters of a maize genotype – p9903 – at two different experimental sites in a field experiment. Furthermore, we examined these parameters’ variability in individual plants on the leaves with different ages. Absolut...e chlorophyll content of the leaves were analysed, separately that of chlorophyll a and chlorophyll b. We also measured the absolute carotenoid contents of leaves. Furthermore, we calculated these photosynthetic pigments’ content ratio. Specific leaf area (SLA) and dry matter weight were also measured in order to characterise plant production. The results obviously reflect the decreasing in the efficiency of photosynthetic apparatus on the low yield site. Otherwise, we identify significant differences only in certain cases of leaves.

Show full abstract
132
108
Rheological evaluation of industrial tomato
Published December 15, 2019
137-140

Today, tomato has the second largest harvesting area globally, and the fourth largest in Hungary. The importance of industrial tomato is growing year by year, and one of the most important tasks is to satisfy the needs of the industry. To meet these needs, the producer has to find the proper genotype, which can achieve up to 100 t ha-1...p> crop yield. This quality has high importance to be researched.

The experiment was carried out in the Botanical and Exhibition Garden of the University of Debrecen, with 3 examined genotypes. The planting date was 3 of May 2018. The harvesting was two-threaded. On 27 of July the physical parameters – fruit shape index (length/diameter), firmness (kg cm-2), water-soluble dry matter content (Brix%) and weight of the berries (g) – were evaluated. On 15 of August the rheological parameters were examined – the force needed to tear the skin – bioyield point (g) and flesh firmness (g).

The fruit shape index was oval (between 1.19 and 1.24) for all the examined genotypes. The firmness was between 0.92 (UG1122713 F1) and 1.05(Prestomech F1) kg cm-2, which compliance the needs of the industry. The water-soluble dry matter content was suitable, with a value between 4.49 (Prestomech F1) and 4.65 (UG1122713 F1) Brix%. The weight of the berries was between 45.94 (UG989 F1) and 49.37 (Prestomech F1) g per piece.

The bioyield point was between 76.00 (UG1122713 F1) and 85.16 (UG989 F1) g. The flesh firmness was between 33.68 (UG1122713 F1) and 42.81 (UG989 F1) g.

Finally, we can conclude based on the obtained data that the UG989 F1 hybrid was the most proper for the applied cultivation conditions. This genotype can be recommended for the farmers even in extreme weather conditions.

Show full abstract
63
87
Experience at Russian State Agrarian University – Moscow Timiryazev Agricultural Academy on introduction and integration of precision agriculture technology
Published November 13, 2012
73-76

Traditional and precision agriculture technologies are compared on the basis of the field experiment. Problems of soil and crop survey and mapping are discussed.

58
102
From Organic to Precision Farming (Contemporary Publication)
Published December 10, 2002
81-86

The paper presents a short review of the different types of farming systems:
Biofarming, Organic farming, Alternatíve farming, Biodynamic farming, Low input sustainable agriculture (LISA)
Mid-tech farming, Sustainable agriculture, Soil conservation farming, No till farming, Environmentally sound, Environmentally friendly, Diversity farmi...ng
Crop production system, Integrated pest management (IPM), Integrated farming, High-tech farming
Site specific production (SSP), Site specific technology (SST), Spatial variable technology, Satellite farming.
Precision farming
It concludes that the various systems are applicable in different ratios and combinations depending on the natural and economic conditions.
The author predicts an increase in precision technologies , the first step being the construction of yield maps compared with soil maps and their agronomic analysis. Based on this information, it will be necessary to elaborate the variable technology within the field, especially for plant density, fertilization and weed control.
The changes in weed flora during the past fifty years based on 10.000 samples within the same fields using the weed cover method are presented.

Show full abstract
31
53
The role of non-optimum Fe-Zn ratio in the development of latent zinc shortage in cucumber (Cucumis sativus L.)
Published March 20, 2013
7-11

...5); font-variant-ligatures: normal; font-variant-caps: normal; -webkit-text-stroke-width: 0px; text-decoration-style: initial; text-decoration-color: initial;">The general micronutrient deficiency of the soils influences the quality of food production which causes human health problems in several countries as well. The non optimal Fe-Zn ratio can cause latent zinc deficiency – which the plants response in the function of their sensitivity –what has no visual symptoms or the plant shows deficiency symptoms in case of appropriate zinc supply. This phenomenon can cause significant decrease in the crop yield.

The aim of this study was to prove the role of non optimal Fe-Zn ratio in the evalution of latent zinc deficiency.

The non optimal Fe-Zn ratio caused decrease in the number of the leaves, the number and length of the internodes, the relative chlorophyll contents and in the dry matter production. According to the results the non optimal Fe-Zn ratio caused difficulties in the metabolism, which decreased the examined plant physiological parameters in the most cases. It can be concluded if there are higher iron contents in the tissues than zinc it can result latent zinc deficiency.

Show full abstract
89
95
Evaluation of Soil Degradation Based on High Resolution Remote Sensing Data
Published December 6, 2005
145-148

Soil salinity is the main problem of soil degradation in the Grate Plain with cultivated area of 20% affected. Its influence is accelerated on the water managed and irrigated lands. Remote sensing can significantly contribute to detecting temporal changes of salt-related surface features. We have chosen a farm where intensive crop cultivation t...akes place as a test site as soil degradation can be intensive as a result of land use and irrigation. In order to evaluate soil salt content and biomass analysis, we gathered detailed data from an 100x250 m area. We analyzed the salinity property of the samples. In our research we used a TETRACAM ADC multispectral camera to take high resolution images (0,2-0,5 m) of low altitude (300-500 m). A Normalized Vegetation Index was computed from near infrared (750-950 nm) and red (620-750 nm) bands. This data was compared with the samples of investigated area. Analyzing the images, we evaluated image reliability, and the connection between the bands and the soil properties (pH, salt content). A strong correlation observed between NDVI and soil salinity (EC) makes the multispectral images suitable for construction of salinity map. A further strong correlation was determined between NDVI and yield.

Show full abstract
29
66
Results of Sulphur Fertilization Experiment with Oilseed Rape
Published September 8, 2020
174-178

The rape is definitely a sulphur-demanding crop, which yield and the quality of its oil is threaten by the emerging shortage of sulphur nowadays. We made sulphur fertilising trials on two places in the northeastern rape growing area (in Felsőzsolca and Mezőkövesd), in the season 2001/2002. We compared the result the 5 five treating set in 2 ...repeats on brown forest soil with the results of the control plots. We used FitoHorm 32 S sulphur solution as sulphur fertiliser, with the dose of 3, 6 and 10 litres per hectare, as well as the joint effects of sulphur and boron; and the effect of boron alone. On the assessment of our results we looked for relation between the sulphur fertilising, the seed production, the oil content and the protein content.

Show full abstract
20
22
126 - 143 of 143 items
<< < 1 2 3 4 5 6