Search
Search Results
-
Urban Transportation Problems and Issues in Homs-Syria: Analytical Study of the Current Condition and Proposing Future Solutions
30-42Views:270Cities in the north middle east are known for their past and old valuable heritage, with a complex master plan of each one. Homs city is Syria is one of them, it has a history dates back to 2000B.C. with a unique formation of the city. However, the urban area of Homs has a very distinctive characteristics, but unfortunately it suffers from the transportation system operated. The congested and unorganized planning process have led the city to a complete mess and disorders, for all categories of its inhabitants. This study analysis the components of the transportation system, and identifies the greatest issues and problems the inhabitants suffer from, by locating the driving forces and the causes of these issues, and generally asses the quality of the system itself. Therefore, a holistic approach is proposed to improve the transportation system, and suggests some key plans to shift the city to a higher level of development. By locating the strength points, and detect the benefits of these strength points and exploit them. By evaluating the road network and create a new system that mitigates the negative environmental impacts (emissions, noise…) and reduce the crowded gathering of inhabitants, which caused a severe stress in their daily life. Overall, an attempt of implementing a new transportation system to contribute in the development process, and opens the possibility to develop other systems of the city in a sustainable framework.
-
An Analytical Solution for Static Problems of Cantilever Curved Beams with Variable Cross Sections
226-233Views:118This paper gives an analytical method to obtain the deformation of a cantilever curved beam. The curved beam considered has circular centre line and the thickness of the cross section in radial direction depends on the circumferential coordinate. The kinematics of the Euler-Bernoulli beam model is used to formulate of governing equations. The curved homogeneous and isotropic elastic beam is fixed at the one of the end cross section and on the other end cross section is subjected to concentrated forces and a couple. A numerical example illustrates the applications of the derived formulae.
-
Design of Experiments Application for Machining Process Analyse
257-265Views:99In this contribution are results from machining of the aluminium alloy by spiral router. The experiment was designed as full 3 - factors and 2-levels process and for evaluation of input factors to output parameters – Fx and Fy components were used Paret´s diagram and Lorentz´s line. The input parameters were: revolution speed (4000/min. and 6000/min.), working engagement of a cutting edge (depth of cut) ae (1 mm and 3 mm), back engagement of a cutting edge (with of cut) ap (5 mm and 15 mm) and down (climb) milling.
-
Direct Optimization of an Automotive Sheet Metal Part Using ANSYS
134-142Views:349Optimization of automotive parts nowadays is mainly used to design lightweight and cost-effective vehicle parts in order to improve the cost and efficiency. In this research, a sheet metal part was taken into consideration and optimized using direct optimization module in ANSYS to evaluate the process. An initial Finite Element Analysis (FEA) was done on the sheet metal part by adding forces and constraints in order to initiate direct optimization. The purpose of the optimization is to minimize the mass of the sheet metal part and maintaining a certain Factor of Safety (FOS) by automatically modifying the sheet thickness and the dimension of the side holes. As a result, the best candidate point with 23% mass reduction was found which complied with FOS value was selected for optimal geometry.
-
Analysis of Structural Strengths Applied the Cableway Group
62-66Views:52This paper will present the analysis of structural strengths for the cableway group. Three loading scenarios were analyzed. Each of these scenarios will be presented on the cableway group and explained with the intervening forces.
-
Mechanical Design and Finite element Analysis for Acetabular cup
23-35Views:101Hip replacements typically consist of a four-part piece. Our research will focus primarily on the acetabular component. Several different types of materials can be used when creating a hip replacement implant ranging from plastic to titanium. Different materials are used to accommodate for allergic reactions or circumventing potential health risks. Aside from the material, the size of the components plays a factor in terms of durability; a larger diameter head might avoid dislodgement though it could increase wear and tear on the stems through constant friction. A patient’s force applied to the hip replacement is usually measured through a number of physical assessments. Finite element analysis (FEA), a computer-based method of data observation, allows for us to accurately simulate hip forces and their impact on the hip replacements. Through this, it becomes easier to predict and calculate the performance of specific designs. Generative systems can also be used to support performance analysis and optimization through assessing a multitude of cases, many of which apply in real-world scenarios. By applying both systems, we designed and modeled an acetabular cup that when measured decreased the mass from 129 grams initially down to 52 grams, a 60% decrease in total mass. Furthermore, the design we created lessened the trauma on the piece through distributing force across the entirety of the piece rather than specific segments only. This shows an increased durability and life expectancy when compared to usual acetabular cups.
-
Introduction to Design and Analysis of Torsional Vibration Dampers in Vehicle Industry
310-324Views:295The crankshaft of today’s internal combustion engines with high performance output are exposed to harmful torsional oscillations originated from the unbalanced gas and inertial forces. To avoid the fatigue damage of engine components, caused by the undesired vibrations, torsional vibration dampers can be applied. Viscodampers are one type of the torsional vibration dampers, which operational fluid is silicone oil. For cost-effective R&D activities and production, finite element and finite volume numerical discretization methods based calculation techniques must be involved into the engineering work supported by the modern computer technology. The aim of this paper is to provide an insight into the multidisciplinary design and development process of visco-dampers in vehicle industry applications. Four different examples as structural, fatigue, CFD analyses and structural optimization have been introduced in the present work. It turned out from the static structural and fatigue analyses, that the investigated damper has safety factor over the limit for both static structural and fatigue analyses, so it is suitable for the given load conditions. In the structural optimization process 34.36% mass reduction has been achieved. According to the coupled fluid dynamic and heat transfer simulations a rather stagnating air zone evolved between the engine and the damper during the operation, which can cause efficiency reduction of cooling fins mounted onto the housing. In light of the numerical results, the suitable damper position has been determined for the highest heat transfer.
-
Forces Attributed to Dark Matter May Originate from Entangled Particles as Seen in the Shape Of Galaxies Formed by Grbs
23-32Views:95Recently, it has been suggested that entangled particles may be connected by a wormhole. If that is right, what is the distance between them we have to take into account when applying Newton's law of universal gravitation to these particles? We propose the idea that these particles may attract each other regardless of distance, resulting in a force that behaves exactly the same way as the force derived from presumed dark matter. Traces of such a force seem to be present in galaxies due to gamma ray bursts (GRBs) that produce entangled particles which hit various objects. We can observe that in barred spiral galaxies the arms always pass through the nucleus of the galaxy so we believe that the very first GRB happened at the central supermassive black hole (SMBH) and the arms are the traces of this ancient GRB. If we see an unbarred spiral galaxy, we can be certain that the arms do not pass through the core and we think the very first GRB happened close to the core. Ring galaxies may also be considered as a type of spiral galaxies, since there is a section where the ring is broken, i.e. where the arms do not meet. So the very first GRB happened far from the core. Elliptical galaxies may have resulted from an ancient GRB which hit from outside. The arms rotating in opposite directions of the NGC4622 galaxy support our hypothesis. Finally in the silk threads of the spider web of the universe, the traces of GRBs can be seen.
-
Talent Management in International Practice Through the Example of Europe and China
454-464Views:247The reason behind is that they have their own principles, strategic goals and industrial environment that they have to manage on daily bases. The current labour and talent shortage across Europe forces local companies to supply their demand of manpower from foreign countries – encouraged by the ’four freedoms’ of the EU. In consequence of the globalisation, we have to keep in mind that running a talent management system has its challenges. For instance, employees with different cultural background might have unconventional needs. Due to the cultural, demographical and economical differencies, we must know the structure of our labour force to use the most beneficial tools to induct, motivate or retain our human resource. The aim of this research is to analyze Europe’s and China’s talent management systems to reveal similarities and differencies between them and pick the most notable ones. From the point of comparison, analysing China would be important for European countries to discover further possibilities, as nowadays China has one of the most dynamically developing economy with enormous population behind. The primary result of the research is that deficiency of talent is irrespective of the size of the population and it causes difficulty in both European and Chinese fields, therefore it proves to be a real and general challenge needing attention at organizational level. Furthermore, identifying regional patterns considering peculiarities, the framework of talent management systems can be defined and be found summarised in the article.
-
Topology Optimization of Acetabular Cup by Finite Element Simulation
22-34Views:396Hip replacements typically consist of a four-part piece. Our research will focus primarily on the acetabular component. Several different types of materials can be used when creating a hip replacement implant ranging from plastic to titanium. Different materials are used to accommodate for allergic reactions or circumventing potential health risks. Aside from the material, the size of the components plays a factor in terms of durability; a larger diameter head might avoid dislodgement though it could increase wear and tear on the stems through constant friction. A patient’s force applied to the hip replacement is usually measured through a number of physical assessments. Finite element analysis (FEA), a computer-based method of data observation, allows for us to accurately simulate hip forces and their impact on the hip replacements. Through this, it becomes easier to predict and calculate the performance of specific designs. Generative systems can also be used to support performance analysis and optimization through assessing a multitude of cases, many of which apply in real-world scenarios. By applying both systems, we designed and modeled an acetabular cup that when measured decreased the mass from 129 grams initially down to 52 grams, a 60% decrease in total mass. Furthermore, the design we created lessened the trauma on the piece through distributing force across the entirety of the piece rather than specific segments only. This shows an increased durability and life expectancy when compared to usual acetabular cups.
-
The Effect of Player Transfers on Football Companies Valuation
Views:213Transfer seasons are one of the most highlighted periods in world of football. The market of player rights forces the greatest european clubs with their enormous budgets to compete with each other in order to aquire the most talented and most succesful players. It is not uncommon to sign players for tens of millions of euros, to this extent these expenditures are seriously affecting clubs bottom line. However, despite the expenditure nature of player transfers the value of these clubs increase, based on the best known measurer for companies valuation: the stock exchange. In my research the effect of player transfers ont he valuation of football corporations are presented through market value development of stock market listed clubs namely Juventus and BVB Dortmund. Based on my results if the examined clubs were signing players according to a player transfer policy considered as succesful the value of examined clubs had increased through stock market price independently of player transfer balance. Moreover the effect of coronavirus could had been noticed, since both clubs valuation decreased heavily in the 2020 summer transfer window probably due to the revenue loss caused by the pandemic.
-
Topology optimization and rim design
92-101Views:250A goal of this article is to show the development of the car wheel rims along with the progress of the manufacturing technologies over the past few years. To achieve this goal, topology optimization and generative design usage have been reviewed in this work. The research has focused on the main factors, which affect the life of car wheel rim, and it has shed the light on the effect of the topology optimization and the generative design on the manufacturing of the car wheel rims. Since the main factors above-mentioned are the: forces, material preferences and topology optimization, the study has covered the results of the studies made on each part along with the technology progress. Moreover, the article has explained the methodology main steps of the topology optimization and the generative design and their principles.
-
The Impact of Optical Character Recognition Artificial Intelligence on the Labour Market
9-16Views:327Because of present day information technology, there is neither need to plant complicated computers for more millions price if we would like to process and store big amounts of data, nor modelling them. The microprocessors and CPUs produced nowadays by that kind of technology and calculating capacity could not have been imagined 10 years before. We can store, process and display more and more data. In addition to this level of data processing capacity, programs and applications using machine learning are also gaining ground. During machine learning, biologically inspired simulations are performed by using artificial neural networks to able to solve any kind of problems that can be solved by computers. The development of information technology is causing rapid and radical changes in technology, which require not only the digital adaptation of users, but also the adaptation of certain employment policy and labour market solutions. Artificial intelligence can fundamentally question individual labour law relations: in addition to reducing the living workforce, it forces new employee competencies. This is also indicated by the Supiot report published in 1998, the basic assumption of which was that the social and economic regulatory model on which labour law is based is in crisis.
