Search
Search Results
-
Efficient removal of salts from the residual dross of aluminium melting
259-269Views:107A residual dross of high quantity and high salt content arises from the hot (thermo-mechanical) treatment of the primary dross generated by the production of aluminium alloys from scrap. It contains a relatively low concentration of metal (5 – 10 %) but a high amount (30 - %) of chloride salts and some other components beside the oxide matrix. Due to the components dissolved in or reacted with water, this industrial residue - arising in thousands of tons also in Hungary – qualifies as hazardous and causes a real burden to the environment. According to the laboratory experiments aimed at an economical technology, the chlorides are dissolved within a few minutes when a liquid/solid ratio of 1:1 cm3/g (water volume:sample mass) is assured with an intensity of the horizontal shaking to prevent sedimentation. However, the filling ratio of the vessel also appears to have an effect. An implementation of relatively low cost would allow the recycling of the salt and the application of the final residue for alternative purposes.
-
Outlook of Precision Farming in Hungary
133-147Views:1133For agriculture, precision farming means the future by increasing incomes and reducing environmental loads at the same time Precision management produces a surplus in yield, revenue, result, but not immediately. The additional income potential is expected to increase by 20% to 50%. Farms mostly introduce precision farming in order to relieve workers. However, many farmers are afraid of the use of new technologies, but the use of information technology in agriculture will be unavoidable. Technology is fundamentally expensive, not even widespread, and farmers use only a few technology elements. Moreover, following the precautionary principle technology used in farming covers only a part of their agricultural land. So farms need to learn to produce more precisely than before in a knowledge-based manner.
-
The Expectations and Motivation Regarding Future Income and graduation of the Students of the University of Debrecen, Faculty of Engineering
1-11Views:111My research conducted among undergraduate students of the Faculty of Engineering of the University of Debrecen examined the students’ incentive and income expectation broken down by their gender and by their ducation level. At the same time, it aimed to measure the impact factors influencing their motivation to get the degree and their ideas regarding the payment.
-
The Role of Stocks in the Supply Chain
515-526Views:1067Az ellátási lánc teljesítményét nagymértékben befolyásolja a szereplők készleteinek összetétele, nagysága, rendelkezésre állása. A végső fogyasztókért vívott versenyben kiemelt szerepe van a kiszolgálási színvonalnak, hiszen az ellátási láncok ugyanazokért a fogyasztókért vívnak versenyt, és a fogyasztók döntése leginkább e két tényező, mint a készlet nagyága és a kiszolgálás minőségétől függ. A tanulmány a kkv-k logisztikai problémáit feltáró kutatás része, melynek célja rávilágítani a jellemző nehézségekre, és azokra a kihívásokra, amelyek legtöbbször elkerülik a logisztikai- vagy ellátási lánc vezetők figyelmét. A fejlődő kkv méretű vállalkozások versenyképessége - ami magába foglalja a költségek nagyságát is, kapcsolódva a K+F tevékenységhez vagy vállalat növekedéshez – a lekötött tőke mértékével arányosan változhat, melynek jelentős részét képezik a készletek. A kutatásban résztvevő vállalat, a Diego Kereskedelmi Kft. készletezési politikáján keresztül kerül elemzésre a készletek összetétele, illetve a velük kapcsolatos kockázatok, illetve félreértések. A tanulmány célja továbbá a helyes megoldások elősegítése, melyhez szorosan kapcsolódik (az itt tárgyalásra nem kerülő) Lean megoldások támogató szerepe.
-
Investigation of the Eigenfrequency of the Bending Vibration of the Beam Clamped at Both Ends Around the Principle Directions of Inertia Based on a Single-Degree Freedom Model and a Finite Element Method Analysis
69-79Views:155In this study, we have dealt with the calculation methods of the eigenfrequencies associated with the bending vibrations of rectangular-shaped beams clamped at both ends. Said eigenfrequencies were determined analytically in the single-degree of freedom model of the beam and the case of the three-dimensional solid and three-dimensional rod models by finite element modal vibration analysis. We presented the calculation method of the characteristics of the analytical model and then calculated the eigenfrequency for a concrete example. We have described the concept of modal characteristics, and in the following, we have determined its natural frequency based on the solid-beam and rod models of the former beam. We calculated and compared the solutions belonging to the models recorded in different ways in 11 additional cases of the presented methods.
-
Use of IoT Tools to Support the Decision-making Process
125-141Views:208Nowadays sensor networks and other systems, based on the IoT concept demonstrate the benefits of their usage, which includes the support of the decision-making process, therefore achieving an optimal result in the context of more and more fields. In this experiment, an additional sensor network has been developed based on a modular system derived from a previous development by means of a target-specific modification of the required modules to measure environmental data in a drying chamber used in food industry. The main objectives include the development of the device, the verification of the measurements of the factory-built device, providing an interface, which is able access the measurement data and after gathering experience from the usage, further developing the system and extending the functionality of the web application. The built-in data acquisition and control system stores the data of the measurements in the form of text files, while our additional data acquisition and control system uses a unified measurement database to store the data. According to the structure, a task-specific application has been developed in order to unify the two sources. Analysis of collected data was performed after running the ETL (extract, transform, load) algorithm converting the transaction-oriented database. The experiment shows so far the benefits of the multi-point measurements by a significant difference between the measured values, so we certainly consider further developments.
-
Co-authorship Network Analysis
76-84Views:140The methodological basis of research on networks is given by graph theory. During the network analysis we work with a big data population and we are mainly analysing the relationships of the actors, which can be visualized with the graph network. The analysis of social network is becoming more and more popular in academic life as well. Most of the co-authorship networks are built around a number of prestigious people who manage their own network as a central player creating cliques.
-
Six Sigma in preconstruction: case study on improving of reinforcement steel processing
Views:24Lean process improvements are crucial for enhancing production efficiency. In my research, I examine the application of the DMAIC methodology to develop the MEP facility within the framework of lean Six Sigma. Highlighting the challenges of precast concrete production, my study details how lean management aids in efficient process design and measurement. Introducing lean Six Sigma methodology involves standardizing processes and ensuring their effective development, contributing to the facility's efficiency
-
Opportunities in circular agriculture
17-23Views:229Water is the source of life. For the long-term preservation of water resources it is very important to develop sewerage and sewage treatment. Sewage sludge is not primarily a waste that needs to be disposed of but also a secondary raw material or a renewable energy source. Municipal sewage sludge, and sewage sludge composts, contain relatively large quantities of organic matter, so agricultural utilization can be a major potential of its use. The transition to sustainable agriculture is becoming more urgent and increasingly important as it can provide a solution that looks to the future. Sustainable agriculture should work according to natural law, so it should be self-sustaining, that means, cycles, where in to one process the waste created can be used as raw material in the other process. The beneficial effects of sludge on soil include increasing soil organic matter content, increasing soil fertility, nutritional capacity, microbiological activity, and complex fertilizing effects. However, when is applicated, there is always a problem with the occurrence and accumulation of toxic elements and drug residues. The traditional model of economic activity is the linear model. This model ignores the high economic social, and environmental costs of exploiting, transforming and removing of the resources therefore it is not sustainable in the long term. The circular economy offers an alternative model in which the products materials and resources are maintaned as long as possible and the amount of waste is significantly reduced or lost. It is also possible adapt the overtuned ecological, biological balance of agricultural production systems, with a closed loop circular model. According to this model, the development of tillage technologies and the restoration of organic materials and nutrient supply are possible.
-
Role of Grants for Tourism Purposes in Development of the Northern Great Plain Region
365-376Views:153Aim of the treatise is, based on main macroeconomic indicators, to present the development of the Northern Great Plain region and the amount of EU grants received, including the ones for tourism purposes, as well as to examine the effects of grants. Based on the data, it can be concluded the region received significant grants during the years 2007-2013; it is in last place in view of the economic development but has achieved better performance in several areas. It is difficult to examine the accommodation and food service national economic sector independently: in one respect, it develops by the combined impact of several other areas, on the other hand, the tourism-related developments become usable for other sectors as well, new enterprises and investments are launched, at the same time, not only the companies’ but the municipalities’ revenues from tourism are increasing. Based on the statistical data, attention will be drawn to the fact that the outcome of developments is just moderate in the area of catering and tourism in the region and has a different rate by county.
-
About a Math Textbook for Engineering Students
132-138Views:80What is the optimal amount of the theory in engineering mathematics education? How to be precise and effective at the same time? We present an attempt to answer these questions by a textbook containing higher level mathematics, especially calculus, for engineering students.
-
A Possible Way to Encourage Sustainable Consumption
21-40Views:303With the growth and spread of the concept of sustainable consumption and with the re-emergence of issues related to needs, the basic concepts of consumption need to be analyzed from aspects not inspected by mainstream economics. Consumer behaviour is largely determined by the prevailing values of society and nowadays consumption symbolizes social status. The purpose of this study is to critically examine the concept of utility, to review traditional and alternative concepts and aspirations related to the promotion of sustainable consumption. The authors argue, that utility can not only be examined by narrow economic considerations; the values of present and future generations also must be taken into account when determining what is considered to be useful. The study concludes by presenting alternative financial solutions that encourage sustainable consumption. The presented examples demonstrate, that complementary currency models are suitable means to encourage sustainable consumer behaviour. These are external motivational tools eliciting the desired behaviour through reward schemes.
-
Estimation of the Potential Runoff Quality Improvement as a Result of Applied Green Infrastructure Measures in a Hungarian Town
34-41Views:160Green infrastructure measures improves the quality of surface and subsurface waters along with increasing the water balance on the town level. The aim of the study is to estimate the potential runoff quality improvement by applying stormwater BMP-s along traffic roads in the town. This is of high priority in the aquifer protection area where runoff water may infiltrate into the aquifer carrying pollutants from the surface. Estimations are applied: first we determine the surface of traffic roads, then estimate the quantity of different kinds of pollutants accumulated on the surface and thirdly we estimate the expected performance of the applied green infrastructure elements based on findings in the literature. We determine the impervious urban surface area associated with transport-related functions within the protected drinking water recharge area using GIS technic using orthophotos. We estimate the expected reduction of runoff pollution assuming that stormwater BMP-s are applied in the area. The overall goal is to make the significance of diffuse pollution more obvious and enhance drinking water protection through taking diffuse pollution into consideration.
-
The Relationship Between Renewable Energy Consumption, Net Energy Import, Greenhouse Gas Emission and Human Cap
58-71Views:145The measures to improve energy efficiency and increase of renewable energy production and consumption should be encouraged in the interest of sustainable development. Many factors can influence the use of renewable energy such as the level of economic development of an economy, nationals’ and the main economic actors’ environmental awareness, energy import dependency, ratio of the urban population, and government subsidization intensity among the others. The main purpose of this study is to examine the relationship between the share of renewable energy in the total energy consumption and net energy import as a percentage of energy use less production, greenhouse gas emission per capita and human capital using by OECD countries data from 1990 to 2014. The results indicate that there is a negative relationship between net energy import and renewable energy consumption, and also negative relationship can be shown between the amount of greenhouse gas emission per capita and renewable energy consumption. However, we identified a positive relationship between human capital and renewable energy consumption for energy importer countries above a certain level of human capital.
-
Qualitative and Quantitative Analysis of Optical Industry Produced Grey Water, Proposal For Treatment Technology
84-88Views:77Our research we investigated Carl Zeiss Vision Hungary Kft. grey water from laundry. Our research aims to provide the optical industry produced grey water quality and quantity parameters to obtain a comprehensive picture. The quality parameters for additional aim was to test, whether it is worth tut collect grey water produced in the optical industry to the place of origin. Subsequently, the development of a treatment technology that economically it would be valuable for the company. It has been observed that it is not necessary tut collect grey water from washing machines and cleaning machinery, since it is similar to the organic load them. It was based on a financial assessment of the grey water treatment technologies in two technologies: coagulation-flocculation and aerobic bio membran technology. Investment and maintenance costs in respect of the implementation of the aerobic clearly bio membran technology proved to be more economical.
-
Analysis and Comparison of Forecast Methods for a Small Enterprise
14-21Views:334The application of forecasting models is an essential part of the profitable operations of every company. However, today’s small and medium sized enterprises (SMEs) does not pay enough attention to this field. This research presents a case study in which we tried to determine the sequence of a forecasting process, furthermore, determine the best applicable method to the dataset. Seven dissimilar forecasting method was applied: moving average and weighted moving averages with different periods (2-3-4 weeks), as well as exponential smoothing. The four-week-long weighted moving average served the best solution, which was tested by tracking signal as well.
-
Green Sports Products – Environmentally Friendly Efforts of some Sports Equipment and Sportswear Manufacturers.
45-61Views:119In today's world, the issue of sustainability has become a cardinal problem on a global scale. The question of sustainability affects society, health, the economy, and the environment to a large extent. The examination of the environmental aspects of sustainability at the points where the sports sector interacts with the environment is considered a basis for research, and an increasing number of international studies and literature deal with this topic. Sports equipment and sportswear manufacturers operate through high numbers of multi-level global supply chains. They constantly strive to meet sudden changes in consumer demand, which results in high demand for raw materials and resources, waste and greenhouse gas emissions, and water consumption, all of which contribute to the most harmful environmental effects.
The aim of this study is to present the environmental protection measures of Nike, Adidas, and Under Armour, multinational manufacturers of sports equipment and sportswear, aimed at raw material usage, waste management, minimizing water consumption, and reducing their carbon footprint, which they are increasingly applying as part of their business strategy.
-
Reduction of Energy Use for Heating in Detached Houses using Passive Technics
64-76Views:114Reduction of energy use in buildings continue to be one of the most important goals in this sector. The aim of our research was to analyse the effects on the heating energy demand of passive technics. In the case of a detached house the energy savings using mass wall, Trombe-Michel wall and sunspace was determined. The calculations have been performed in the case of a building with average thermophysical characteristics and in the case of a building having similar geometry but its external building elements fulfilling the requirements of nearly zero energy buildings. It was proven, that some of the mentioned technics may lead to higher energy demand for heating, so a complex energy analysis has to be carried out before implementing them.
-
The Potential of Online Workouts for Fitness Trainers
49-60Views:346The importance of physical activity for both physical and mental health is unquestionable. For leisure athletes, fitness clubs can be considered as popular facilities for everyday workouts. Classes run by qualified trainers, whether individual or group workouts, are very popular. In line with the worldwide trend, there is a growing expectation for fitness workouts to be reachable as simple as possible, in as many forms as possible, regardless of the location. The aim of our study is therefore to map the prevalence of online training among trainers working in the fitness sector. There is a significant demand for such workouts, even if it cannot completely replace hours of personal presence. In addition, as well as for target groups who want to find a form of exercise that can be performed anywhere, anytime, the online space provides an ideal opportunity to practice regular physical activity, as well as a good opportunity for coaches to expand their clientele and services.
-
Investigation of Information and Communication Technologies (ICT) Usage in the Business Relations of the Agri-Food Econ
21-29Views:110Small and medium-sized enterprises are the engines of Europe's economy. This is demonstrated by the European Small Enterprises Charta, adopted in 2000, and by the fact that this sector employs more than 90 million people. Appropriate information and communication technology is essential to maintain their ability to function effectively and competitively. They need to know how to use these technologies for their smoot growth in productivity. The purpose of our study is to assess the regional ICT penetration of the Hungarian SME sector and compare this to that of the EU Member States.
-
Debrecen légszennyezettségének vizsgálata epifiton zuzmók nehézfémtartalmának tanulmányozásával
48-52Views:112Kutatómunkánk során Debrecen város forgalmasabb csomópontjaiban vizsgáltuk a levegőminőséget nehézfém tartalom szempontjából. Vizsgálatainkhoz epifiton indikátornövényeket gyűjtöttünk Debrecen meghatározott útszakaszai mentén, és városon kívüli kontrollterületen. A mintavétel a zuzmók vegetációs időszakának megfelelően március elején történt. A begyűjtött minták tisztítását, szárítását és roncsolását követően vizsgáltuk azok toxikus fémtartalmát Induktív Csatolású Plazma- Optikai Emissziós Spektrometria elven működő készülékkel. Összesen 9 fém koncentrációját vizsgáltuk, többek között a nickel, ólom, réz és cink tartalmat.
-
Evaluation of a Trainee Program’s Selection and Induction
502-511Views:528The research based on the trainee program of a large Hungarian company. The company recommends the program to entrants or those who have 1-1,5 years of work experience. The main objective is the evaluation of the effectiveness of the program through some of the HR functions. This study contains the process of the selection and the evaluation of getting into the program. What makes the program special, is the appearance of the technical mentor. According to the hypothesis, the mentor’s assistance reduces the uncertainty when the trainee inducted into the organization. The occasions of the beginner education, the conversations and feedbacks during the induction adds more efficiency to the success of the program. The searched data in literature features HR functions and mentoring. To learn about the program, a case study was made beforehand, and then the questionnaire was edited for the trainees at the company. In the course of the research, an interview was done with the technical mentor. The interview was based on the questionnaire. In point of the results, recommendations were defined connected to the assumed shortages of the program, also to increase the efficiency of the selection and induction. In conclusion, the maintenance of the trainee program is equally beneficial for the trainees and for the company as well.
-
Fémhabstruktúrák elemzése és geometriai modellezése
145-152Views:112The development of an efficient procedure for 3D modelling and finite element simulation of metal foams is one of the greatest challenges to engineer researchers nowadays. Creating 3D CAD model is alone a demanding engineering task due to its extremely complex geometry, and the proper finite element analysis process is still in the center of the research. The aim of this project is to analyze the related literature and to adapt the results may be considered
-
The Dunning–Kruger Effect in Knowledge Management Examination of BSc Level Business Students
14-21Views:162The Dunning-Kruger effect (DKE) in higher education evaluation is one of the current research areas of psychology, educational science, and management science (in our case). Its importance is that the less prepared one is, the less accurately one can judge what performance is expected of him. What is more, he will err more and will overestimate himself. The present study aims better to understand the phenomenon with new, small-sample empirical results. The study is part of a research series that has been ongoing at the University of Debrecen since 2015. It not only quantitatively expands the literature but also includes the course of Knowledge Management among those examined. During the research, students were asked both before the examination (N = 63) and after the examination (N = 76) to guess how many points they would achieve on a multiple-choice test. It supports the presence of DKE, both in the case of pre-examination and post-examination self-evaluations. Using four multivariate linear regression models, we examined whether the sign value or absolute value of the errors made during the guesses show a correlation - in addition to the available control variables - with the test score. Our results showed that the more accurate the pre-examination and post-examination estimations were, the higher the students' actual score was, while the less they tended to overestimate their preparation. This supports the presence of DKE, both in the case of pre-exam and post-exam self-evaluation.
-
Examining Used and Sportswear Supply Chain Strategy and Indicators
86-98Views:204The following study presents the supply chain strategy of a second-hand and sportswear company in Hungary. The study discusses the main tasks of supply logistics, the level of logistics service, the main determining elements of the level of logistics service, and the measurement of customer satisfaction. From the first step of the process, we can fully follow the processes until the last activity. We can learn in detail about the sub-processes, such as: types of clothing collection, sourcing, warehousing, selection, disassembly, processing, receipt of goods and sales. The aim of the study is to make the processes more transparent for everyone.
