Search
Search Results
-
Impact of Digitalization on Domestic Trade Strategies
318-333Views:1363The aim of our study is to reveal the fit of digital space into current and future trade and to assess the effects of digitization on Hungarian trade strategies. The information gathering and purchasing habits of consumers have changed dramatically in recent years. Consumers today make buying decisions based primarily on convenience, effectiveness (fast and convenient access to products at adequate price/value ratio), and experience. Adjusting to these trends, traders developed novel trading strategies, and the use of achievements of digitization is an integral part of these strategies. One aspect of digitization is the increasing global development of e-commerce. The Hungarian online commerce have also been expanding significantly from year after year: based on 2018 data, domestic and foreign online sales volume have passed 1000 billion HUF. The Hungarian online consumers buy on the Internet more and more often and at greater and greater value. The online shopping on virtual reality platforms may make this purchase mode more experiential. Webshops have to meet new consumer needs, and deliver the ordered products as soon as possible, preferably within 24 hours. An increasing number of parcel delivery options has begun becoming more and more popular (e.g., automatic parcel terminals, pick pack points). However, traditional channels should not be buried, either. Their obvious advantage is that consumers can take their choice based on multiple senses and it also gives them more room for impulse buying. Combined with the digital technology compliant with contemporary requirements, this can offer a complete shopping experience. Nowadays, recognizing this need online and traditional channels have been mixed in several cases (e.g., multichannel, omnichannel, cross-channel sales) and offer several options for consumers during the purchase process. The sales area optimization of traditional shops and the buyer paths aided by digital technology (e.g., digital shelf labels) are designed for the buyers’ convenience. The newest innovations imply automation of the buying process making the whole process more convenient and more personalized with the use of sensors (e.g., Amazon Go) or robots (e.g., Pepper). In our future purchases, digital personal assistants will appear as digital versions of sales personnel.
-
A Slurry-Pot Abrasive Wear Test Device for Several Composite Materials
437-444Views:88To choose the proper material for agricultural machinery we tested several materials with abrasive cloth on the pin-on-plate test device. After having the pre-results, we launched more complex abrasive testing (slurry-pot) simulating more realistic mode with soils to investigate the abrasive wear mechanism and resistance of the selected up-to-date polymeric structural materials. for this, we developed a modified slurry-pot test machine that ensures the comparability of the materials over a wide range of conditions. Through this device, several parameters could be controlled like speed, the soil particle’s hit angle on the tested surface.
-
Flexibility Analysis Of Inventory Cost Model With Ergonomics
166-173Views:105The economic and environmental sustainability issues in supply chain management have integrated by many researchers in the past decades. The ergonomics as a social aspect of sustainability had received a little attention by researchers. Therefore, the aim of the paper is analyzing the flexibility of developed inventory cost model with relaxation allowance and endurance time as a social aspect of sustainability. The effects of distance, unit weight of item and total number of items on relaxation allowance, the total cost of logistics operation and the EOQ model were investigated. The analyzed mathematical model was a single operator-single material model which covered transportation of fixed amount of raw materials from storage plant to production plant by manual material handling with simple cart and picking, storing, pushing and pushing back with empty cart for manual handling of the products. The different parameter values applied for analysis such as total amount of handled items (Q) changes between 500 pcs to 2750 pcs, unit weight of item (w) changes between 0.1 kg to 1 kg, distance of movement by manual material handling for picking and storing motions (d1) changes between 2 m to 3 m and the distance between the storing equipment and the supermarket of the production line for pushing motion (d2) changes between 15 m to 20 m. The results of the analysis indicated that the longer the distance of movement for all motions leads to decrease in savings of the model compared to EOQ model. The increase in unit weight of item is increase the savings obtained from application of our model and decrease the optimal lot size. There was no specific change on savings or optimal lot size as the total amount of handled item is increase. The compared results indicated that an increase in d1 and d2 lead to an increase in optimal lot size and increase in total cost of the model. Consequently, the analysis has shown that a decrease in lot size would be the better way to improve both ergonomic conditions and total cost of production in any different parameter values. Finally, the analysis of the inventory model with ergonomics were proved that this model is suitable for different industrial practices.
-
Generative Design of a Mechanical Pedal
48-58Views:743Nowadays, there are various tools that support the initial stages of design available to use for engineers, the traditional Computer-Aided Design (CAD) has been implemented in the engineering components design and replaced manual drafting. However, with the advances and the rapid technology development, new trends emerged to cope with this evolution, namely, Generative Design, Topology Optimization, and Generative Engineering Design. The method is based on numerical algorithms that generate a variety of design and modelling options based on the criteria and constraints set by the designer to allow further design exploration. Proposed in this paper is an implementation of the generative design of a mechanical pedal with further finite element analysis.
-
Influence of MTP on Surface Roughness and Geometric Accuracy of Machined Surface at WEDM
91-97Views:102Electrical discharge machining technology is one of the most precise machining methods. Therefore, even the smallest deviation of micro and macro geometry generally has a significant impact on the overall quality of products produced by this progressive technology. The quality of the machined surface after Wire Electrical Discharge Machining (WEDM) is influenced by a large number of factors, most of which are influenced by the Main Technological Parameters (MTP). The aim of the paper was to describe the results of experimental research aimed at assessing the impact of MTP for WEDM on the quality of machined surface in terms of geometric accuracy and roughness parameters Ra and Rz. The samples were made of high alloyed ledeburitic chromium-molybdenum-vanadium steel designated EN X155CrVMo12-1 on a Sodick AQ535 electroerosion machine. The tool used was a standard compact brass wire 0.25 mm with the designation Elecut Brass CuZn37.
-
The CAD Modelling Possibilities of Gear Pairs by Two Ways in the Mechanical Engineering Practice
205-219Views:119The GearTeq 2021 software is a complex gear designer software which is capable to design different types of gears based on the initial geometric parameters by the user. Naturally, the users’ appropriate knowledge for the gear theorem and the manufacturing technology is indispensable for the design. The possibilities of the software are shown in this publication. The designed gear pairs are usable for different engineering fields (robots, working machines, vehicles, etc.).
-
Comparison of the information content of the notes on the accounts between information technology services and sports activities
689-700Views:170Annual accounting statements are an important source of information within business relations amongst companies. However, it should be noted that due to their aggregate nature, the necessary information and through that the necessary knowledge can only be obtained from the two fundamental parts of the annual statements (balance sheet and profit and loss account) if the notes on the account contains the information that contributes to the more comprehensive interpretation of the other part of the annual statement. Beyond that, the notes to the financial statement have to help the presentation of a reliable and realistic overall image. In the notes to the financial statement, depth and detail of the disclosed information are not specifically stated, therefore their professional evaluation is left to the given enterprise. My basic purpose is to illustrate a comparison of the information content of the notes on the accounts between information technology services and sports activities. By means of text mining, we analyse the extent to which the notes on the accounts are in conformity with the Accounting Act.
-
A Literature Review: Artificial Intelligence Impact on the Recruitment Process
108-119Views:9662This paper aim is to review the implementation of artificial intelligence (AI) in the Human Resources Management (HRM) recruitment processes. A systematic review was adopted in which academic papers, magazine articles as well as high rated websites with related fields were checked. The findings of this study should contribute to the general understanding of the impact of AI on the HRM recruitment process. It was impossible to track and cover all topics related to the subject. However, the research methodology used seems to be reasonable and acceptable as it covers a good number of articles which are related to the core subject area. The results and findings were almost clear that using AI is advantages in the area of recruitment as technology can serve best in this area. Moreover, time, efforts, and boring daily tasks are transformed to be computerized which makes a good space for humans to focus on more important subjects related to boosting performance and development. Acquiring automation and cognitive insights as well as cognitive engagement in the recruitment process would make it possible for systems to work similarly to the human brain in terms of data analysis and the ability to build an effective systematic engagement to process the data in an unbiased, efficient and fast way.
-
Digital Twin and Shadow in Smart Pork Fetteners
515-520Views:256This paper introduces our ongoing research in the field of smart livestock farming. The base idea in this research is to take some industry based concepts, and adapt them into agriculture. In Industry we live the fourth industrial revolution, which is not a technical, but an organization revolution. So in this concept there are two key ideas, which are digital twin, and digital shadow. This article is about creating digital twin and digital shadow of a modern pig fattener. These models are based on the literature, and are identified on the data shared in these. However, these models can’t be used on real systems before identifying them on the actual circumstances. At this stage of research only digital twin of the product was created, and only some aspects of it. This however can simulate an average porkers feed consumption, weight growth and calculate the weight on certain stages of breeding. Further development is ongoing and our target is to make a fully functional model of a pig fattener.
-
The Factors of Digitality and Sustainable Competitiveness in the Domestic Context
217-226Views:159The recovery of international relations and the development of technology are in correlation with the increasing globalization tendencies. These processes increase the interdependence of countries, but also the competition between them. The factors of competition are constantly changing and being revalued. As a result new elements appear in addition to the traditional elements, and there are assimetries between existing components. The economic performance of a country increasingly depends on the knowledge and technology, its economic success on the use of knowledge. The purpose of the study is to present and analyze the proxies that define and shape the role of Hungary by IMD Competitiveness Research Center and by the complex indicators developed by Korea-based SolAbility. It also draws attention to all the factors that will significantly effect our country's economy in the future.
-
Utilization of 3D Printing in Replacement of Basic Plastic Workpieces
274-282Views:174In the experiment, a 3D printed cogwheel is made using the FDM technology to replace a broken part in a sewing machine. The aim of the project is to examine if a 3D model can be created and manufactured using only entry-level technical knowledge and tools. By the end of the article, it will be apparent that creating functioning plastic parts with a hobby 3D printer and basic CAD experience is very much possible.
-
Analysis of face milling technology with a thermal camera by the changing of the number of revolution
142-147Views:103The aim of the publication is the analysis of the temperature zone of cutting operation in case of face milling technology. The analyses are done considering of the changing of discreet number of revolution beside the constancy of the more technological parameters. The measuring concept will be determined. After the experiments the received thermal images will be analysed.
-
Local Annealing of Cold Rolled Aluminum Sheets by LASER Treatment
21-26Views:113LASER treatment widely used in material processing technologies. The annealing is not the typical application of the LASER treatment, but this is possible to apply in case of cold deformed metals. In the article a cold rolled EN AW 8006 aluminum sheet is annealed by LASER treatment. The microstructure of the annealed sheets is observed by optical microscopy. An existing cellular automata simulation of recrystallization process is modified to study the LASER annealing. The observed microstructure and the simulated results are compared to determine the further development of the developed automaton.
-
Ultrasonic Powder Atomization for Additive Manufacturing
69-75Views:138The following article presents a special case of metal powder production, ultrasonic metal atomization. In this case, ultrasound technology is based on the capillary wave phenomenon. We verify the suitability of the produced powders for 3D metal printing with various tests. In the case of prints with a metal powder bed fusion (PBF), the properties of the raw material of the powder are extremely important. The main results of the tests carried out in the article (SEM images, EDS composition analysis, sieve analysis) were described.
-
Simulation of Hot Rolling by Cellular Automata
190-195Views:184Our research is focusing to one of the most complex and important production step of flat rolled products that is the simulation of hot rolling. During hot rolling two phenomena as work hardening and the process of regeneration of crystals has strong influence for physical properties of microstructure of aluminium alloys. It needs to be taken into account in case of rolling technology steps and development. When we talk about aluminium the dynamic softening in fact it is dynamic recovery that is followed by dynamic recrystallization. It goes in the same order of magnitude rate. But in steels the recovery has only a minor effect. Hot rolled and newly modified grain structure is influenced by these dynamic phenomena. Hot rolled grain structure goes through significant changes under further production steps like cold rolling and heat treatments. But aside from these intermediate production steps the microstructure that we get after hot rolling has significant effect for mechanical and grains structure of the final flat rolled product. Proper technology planning is essential that for cellular automata simulation method can ensure useable and good solution for the simulation of recrystallization.
-
Model Calculations on the Use of Mobile and Stationary Units for Wood Pellet Production
1-8Views:319This paper presents the model calculations made for supporting the decision making of different technology alternatives. Base cases were A) use of a mobile pelletizer and B) using pellet factories at fixed locations for the production of a new product, sheep wool pellets. Calculations were made for three alternatives for each base case. The results of the model were used to examine the energy, time and cost criteria of the alternatives. Based on the given preliminaries, results of the model calculations supported the recommendation to choose case B) for further technology management and supply chain management decisions.
-
Food Industry 4.0 Readiness in Hungary
1-12Views:265In terms of production value, the food industry is the third-largest in Hungary, the first in Hungary in terms of the number of employees, and the first in Europe in the processing industry, as well as a significant user of resources. The research examined the state of art of digitalization readiness, focusing on I4.0 technologies, which supports the management to operate more efficiently the enterprise and to make better decisions. So the focus was on integrated enterprise information systems, management support systems, business intelligence systems, industry 4.0 technologies, and issues related to their application. The analysis based on an online questionnaire survey the request sent to 4.600 enterprises, the response rate was 5% which was representative of the branches of production, covered the Hungarian food and beverage manufacturing sectors in 2019. The companies were asked the most critical technologies in development, going towards Industry 4.0. The research tools were LimeSurvey, Mailing List Server, Excel, Power BI (Desktop, Publishing Server to distribute the results). The used analysing methods were making calculations, pivot tables, models, dasboards. We found that a significant portion of businesses, 78 %, use mobile devices in the manufacturing process. The three most relevant digital technologies are geolocating (GPS, GNSS), cloud computing, and sensor technology. The current level of digitalization and integration cannot be said to be high, but respondents are very optimistic about expectations. Improvements are expected in all areas in the next 2-3 years in terms of digitalisation and integration. Vertical integration involves, first and foremost, cooperation with partners in the supply chain. Horizontal integration means close, real-time connectivity and collaboration within the company. Unfortunately, between 6% and 15% of SMEs (approximately 9% on average) and large enterprises, 36% have a digital strategy. According to the survey, the sector needs significant improvement and creating a digitalization strategy.
-
The Use of Additive Manufacturing for Wind Tunnel Simulations
62-71Views:102The current economical situation requires aircraft operators to start organizing their activity in the direction of carbon neutrality using innovative solutions.
The goal of present study is to desing a brand new wingtip device using 3D printing which helps reducing aerodynamical drag, leading to fuel efficiency and less carbon emission with its innovative shape.
-
Evaluating the Efficiency of Polyhedral Mesh Elements in Solving the Problem of the Flow around Ship’s Rudder
241-256Views:184Meshing is one of the crucial key features to the success of CFD based simulations, this study is evaluating the efficiency of polyhedral elements in solving the problem of the flow around ship rudder, using a Reynolds-averaged Navier-Stokes turbulence model (SST k-ω), and compares it to a tetrahedral based mesh, considering that polyhedral elements were neglected in the past due to difficulties in implementing them, this was solved by introducing a tool by ANSYS that converges tetrahedral elements to polyhedral element, and integrating it into FLUENT software, the model was validated by comparing it with previously validated model which used the full version of ANSYS, this study was concluded using the academic version, but still it was able to produce satisfying results in predicting the lift and the drag coefficient, the pressure around the rudder surface, the velocity and the turbulent kinetic energy, finally the mesh quality was evaluated using the orthogonal quality criteria, the results showed the supremacy of the polyhedral elements in saving time and computational resources and improving mesh quality, and keeping high level of accuracy in predicting the results.
-
Digitalization Process by Agricultural Companies, or the Results of a Questionnaire Survey
625-636Views:237The term “information society” first appeared in Japanese social science in the early 1960s (Z. Karvalics, 2007). The interpretation of the concept has undergone significant changes over the past decades, showing that dynamically developing societies, which are undergoing constant changes due to the rapid development of information, information management and the dynamism of the digital world. The close relationship and connection between information and information technology has become a fundamental factor in the societies of today, the organizations life, which generates inevitable, sometimes serious debates and profound changes. Economic operators must necessarily be resilient to technological change. We should think of the time of the Industrial Revolution, when modern weaving machines flooded the factories. Otherwise, a resilient organization will not survive in an evolving and ever-changing dynamic economic environment. Of course, this is true of agriculture as well, just as it is for other sectors of the national economy. On the one hand, my assumption on the basis of which my questionnaire was compiled was that enterprise management systems are increasingly used by enterprises in agriculture due to the diversification of activities. At the same time, I assumed that the size of a business could influence the use of information technology (hereinafter IT), so I hoped that my research would provide reliable data on this as well.
-
Analysis of the Causes and Effects of Noise from Rail Transport
116-130Views:68Noise emissions from rail transport are a major concern, as they affect both the environment and people's health and quality of life. Among the many sources of noise emissions, rail vehicles and infrastructure are a major factor. With regard to rail noise emissions, it can be concluded that noise effects are influenced by a number of factors. These factors include train speed, track condition, traction technology and the noise abatement methods used. The negative effects of noise exposure include sleep disturbance, stress and mental health deterioration. It also affects the quality of life of people in urban areas and property prices. It should be emphasised that reducing noise emissions from rail transport is key to creating a healthier and more sustainable urban environment. To achieve this, it is important to use modern noise abatement technologies, improve infrastructure and implement noise abatement actions effectively. Transport authorities and railway companies should work together to achieve a more noise-free rail transport, to improve people's quality of life and to protect the environment.
-
Innovation in Nonbusiness Organizations from a Conceptual Point of View
97-102Views:125The definitions of innovation have been transformed a lot over time since Schumpeter introduced his concept. Even recently one of the most prestigious innovation management references, the Oslo Manual have changed its concept. One rarely discussed aspect of the concept of innovation is that most of the definitions are referring to the business sector; only a few of them are referring to any kinds of organizations, including non-profit and governmental organizations. Any kind of organization must innovate sooner or later; therefore they have to learn how to manage innovation effectively and efficiently. That is why the broad type of definitions is recommended, involving not only for-profit organizations but non-profit and governmental organizations as well.
-
The Implementation of the Japanese and the German Culture into the Operation Hungarian Firm
1-9Views:234How can the Japanese culture be implemented into the operation of a firm - partly a German property working in Hungary. In my presented arcticle I have studied various organisational culture models, and compared them to the culture of our enterprise, seeking for similarities and contraries. I have studied the environmental factors and resources which have an effect on our production. During the investigation I have also considered how can we harmonize cultures of different nations and how it affects the production on the whole. I have also investigated the installation of robots, and searched for the solution how we can make our production much more economical. Due to the persistent decrease of population, and leck of professionals, the use of robots is neccessary to fulfill the customer requirements in time, with the sufficient quantity and required quality of goods. According to the Japanese Toyota-method,theautomatization of a technology can only be successful, if it is tested at least ten times, but –beacuse of the leck of time- we do not have the possibility of it. As the manufacturing parameters and observations have not developed the proper way, the scrap rate is higher than it is at firms, where is more available time for the building up of the technology.
-
The Investigation Of Heat-Resistant PLA Produced By Additive Manufacturing Technology
24-29Views:160In recent years, additive manufacturing technologies have been increasingly used in both custom and small-series production. In such cases, the component must remain functional under realistic conditions.. This means that there must also has a load‑bearing capacity. In many cases, materials are already suitable for strength. However, in many cases (machine parts, outdoor use) the models need to operate reliably at higher temperatures. This seems to be solved by the most widespread additive manufacturing technology (FDM), with a new heat-resistant material, HT PLA. In many cases, the use of cooling is essential during manufacture, especially for parts with high overhangs where hardening of the material is required as soon as possible to achieve the correct surface quality. In this paper, we investigated the effect of cooling applied during manufacturing on the mechanical strength
-
HAZ Characterization of Automotive DP Steels by Physical Simulation
478-487Views:151DP steels were extensively used in the vehicles industry due to its extraordinary combined properties of strength, ductility, formability and weldability which contributed great significance in reducing strength to weight ratio and CO2 emission. High strength steel i.e. DP steels (3 different grades) were experimentally investigated and thermophysically simulated using Gleeble 3500 simulator to determine softening and hardening in heat affected zone. Samples were heated to different peak temperatures (1350 °C, 950 °C, 775 °C and 650 °C), two cooling time (t8.5/5 = 5 s and 30 s) and Rykalin 2D model were selected. The hardness and microstructure of the specimens were tested and analysed. For longer cooling time (t8.5/5= 30 s), we observed that softening occurs in all grade of investigated DP steels to all sub-regions. But for shorter cooling time i.e. t8.5/5= 5 s the softening is higher in intercritical HAZ compared to other sub-regions for all the types of DP steel with short cooling time (t8.5/5 = 5 s). However, the hardening zone in the CGHAZ occurs when Tmax is 1350 ºC for DP600, DP800 & DP1000 steels but it is more prominent in DP800 as compared to others two steel grade.
