Search
Search Results
-
Examination of the Nutrient and Water Utilization of Different Corn Genotypes in the Hajdúság
55-59Views:268The research was set up on chernozem soil at the Látókép MÉK research area of the University of Debrecen in Hungary. We examined the following factors of the hybrid P9494, P9578, PR37N01 and PR37M81 in 2013.Yield, yield production per 1 kg fertilizer, water utilization and nutrient reaction. We found that the best yield results were achieved at level N120+PK in case of hybrid P9494 (17 132 kg ha-1) P9578 (16 838 kg ha-1) and PR37N01 (17 476 kg ha-1) and at level N150+PK for hybrid PR37M81 (16 754 kg ha-1). Results of yield per 1 kg NPK studies indicate that the most intense yield growth occurred at level N30+PK compared to the control treatment. This means that yield production per 1 kg NPK was 39.2 kg kg-1 in the case of hybrid P9494, 54.2 kg kg-1 in the case of P9578, 17.6 kg kg-1 for PR37N01 and 44.2 kg kg-1 in the case of PR37M81. After comparing corn hybrids’ water utilization, our conclusion was that the control treatment achieved the worst results in the case of each hybrid (P9494: 20.8 kg mm-1, P9578: 21.0 kg mm-1, PR37N01: 26.2 kg mm-1, PR37M81: 19.5 kg mm-1). For hybrid P9494, P9578 and P37N01, the best water utilization results were measured at level N120+PK (31.5 kg mm-1, 31,0 kg mm-1 and 32.1 kg mm-1), while PR37M81 reached the highest values at level N150+PK (30.8 kg mm-1). We determined the hybrids’ nutrient reaction and its optimum fertilizer values. The best nutrient reaction results were achieved by hybrid PR37N01, while that of hybrid PR37M81 proved to be the weakest.
-
The effect of production area on the development of yield producing factors of maize (Zea mays L.) hybrids of different genotypes
67-72Views:323Maize yield amount development is determined by the given crop year and the genotype of the applied hybrid, but beside these also by the applied agrotechnical factors, in particular by sowing technology. The development of yield amount and yield producing factors of five maize hybrids of different genotypes has been studied in a small-plot field experiment by the application of different row spacings and plant density variants. The production of the individual plants shows decreasing tendency parallel to the increasing plant density, however, this decrement is compensated by the higher number of plants per unit production area. Individual plant production is determined by the development of yield producing factors, such as the length and the diameter of cobs, just as by the thousand seed weight – that were studied in the present research work as well.
In the present research work the decreasing row spacing resulted in a yield increment of 0.67 t ha-1 (4.53%) in 2013, while in contrast in 2014 yield was decreased by 1.75 t ha-1 (14.87%). The high amount of precipitation in March was determinant in 2013: it filled up the soil water stock and balanced the negative effect of the inadequate amount and distribution of precipitation during the vegetation period for the yield. Lower extent of yield increment (0.6 t ha-1) was registered in 2014 in case of the row spacing of 76 cm than in the previous year. In case of a row spacing of 45 cm the difference between the two crop years was 3.1 t ha-1. The highest impact on the yield production factors was found in all treatment combinations in case of the applied hybrid among the three studied treatment factors. In the crop year of 2014 the effect of plant density on cob diameter and thousand seed weight could be revealed as well. In case of the cob diameter significant difference was found between the plant densities of 70 000 and 90 000 plants ha-1, just as between the populations with densities of 50 000 and 90 000 plants ha-1. In case of the thousand seed weight significant differences could be found by the application of plant densities of 70 000 and 90 000 plants ha-1. The highest values of the studied yield producing factors were measured in case of the plant densities of 50 000 and 70 000 plants ha-1; increasing the plant density to 90 000 plants ha-1 resulted in rather decreasing values.
-
The effect of compost made of sheep manure on the first cut of a semi-natural grassland
25-29Views:451In an experiment, two types of compost were tested on natural grassland in order to improve the productivity of a natural sward on solonetz soil. Both composts were made of on-farm produced sheep manure, but the second one was enriched in phosphorus. These fertilizers/composts are officially authorized and can be applied in organic farming. Zero application and three rates of fertilizer were tested (10 t ha-1, 20 t ha-1, 30 t ha-1) on 30 m2 experimental plots wit four replications. Dry matter, crude protein and net energy content for maintenance were measured and determined and their yields per unit area were calculated. We found that all the treated plots produced significantly higher yield than the control ones, and in some cases the yields were almost three times higher. However, the optimal compost dose varied, depending on the examined parameter. Based on the evaluation of the experiment results along with rainfall data, it was concluded that, with higher precipitation, the positive effect of the compost application was bigger. The difference between the natural and enriched compost is remarkable, but it has to be mentioned that even the natural compost showed good results; therefore, it is also effective in improving the fertility of grassland.
-
Folic acid content of beetroot leaf and root by different growing stages and genotypes
115-119Views:633An increasing interest has been observed of beetroot leaf as a salad component due to recent studies focusing on their nutritional value. The randomized field experiment was carried out on lowland chernozem soil with 6 varieties, 3 replications and 2 sowing dates. Sampling was performed on 23 of August 2018 at the stage of 30 and 50 days of vegetation, where leaf (30 and 50 days) and root (50 days) were collected. Total dry matter, folic acid and nitrate content were evaluated.
The results of this investigation show that higher total dry matter content was measured in the root (8.47–10.30%) compared to the leaf in both developmental stages (6.47–9.20%). Nevertheless, higher folic acid content was found in the young leaves of 30 and 50 days of development (58.77–113.86 µg 100g-1). Among the examined varieties, Bonel has presented great amount of folic acid not only in the leaves (99.35–113.61 µg 100g-1), but also in the root (89.99 µg 100g-1). Finally, lower nitrate content was found in Libero (316.16 mg kg-1) at 30 days and in Akela (340.41 mg kg-1) at 50 days of development. Thereby, fresh consumption of beetroot leaves are highly recommended.
-
Results of a Fertilization Experiment Performed with Sulphur on Rape Seed Plants
116-119Views:576The sulphur fertilizing experiment was introduced in the cropping year of 2001/2002, with winter rapeseed. The experiment was performed on a farm in Magyarhomorog, Hajdú-Bihar County. By selecting the location for the experiment, we had to consider the effect of the hard winter that was very unfavourable for rapeseed production, as there was serious frost damage on the sown area previously used for the experiment. In the arable land experiment, results of three different doses of treatment were compared in two replicates, on meadow soil. FitoHorm 32 S solution was used as a sulphur fertilizer, in doses of 3, 6 and 10 l/ha. Evaluating the results, we tried to find a correlation between the amount of fertilizer and the amount of seed-crop or the oil content of the seed. The nitrogen and sulphur contents of the samples were determined using classical methods and an Elementar VarioMax analyser. By this way, it was possible to examine not only the role of Sulphur in rapeseed production, but also to compare and evaluate results obtained by Kjeldahl and the modern, environmentally-friendly combustion method.
-
Supplementary botanical examinations for modelling the grass production of the great pasture of Hajdúbagos
17-21Views:233Our botanical survey at the great pasture of Hajdúbagos is a part of a broad research that aims to predict the production of the grass at the given area. As the mentioned pasture is a nature conservation area, the usage of artificial fertilizers or other classic grassland management methods in its handling are prohibited. Thus grazing is an important tool for the management of this area, however the not suitably regulated grazing order and the poorly calculated carrying capacity cause serious problems at some parts of the pasture. The prediction of the grass yield is essential to
avoid both over- and both under-grazing and for determining the optimal number of the grazing animal stock and the grazing method, thus the most suitable management strategy.
The potential grass yield is easily calculable with a computer model that will be established as a basis for determining the grass production. For the sake of getting an accurate view of the plant associations of the pasture, we created examination quadrates and determined all plant species found in the quadrates. After plant determination, we compiled a coenological table in which we marked besides the scientific name and families, the life forms of each species that refer to the structure, morphology and thus the adaptability of plants to their environment. We determined the
TWR, so the thermoclimate, water and soil reaction values, the nature conservation values, as well as the covering values of each plant species (DB), and the total coverage of the examination quadrates (B%).
According to the covering values, grasses proved to be characteristic plants at the examined pasture, thus we need to consider them influential in calculating the animal carrying capacity and with the rest of the information, we need to supply the model.
The life forms and TWR indicators, all together with the nature conservation values provide further important data to the development of the management suggestion of the protected pasture. By examining these values to different parts of the area, we could get an exact view on the measure of the degradation effects. This promotes the determination of grazing methods and the forming of the boundaries of certain pasture sections, to avoid those harmful anthropogenic effects that seriously endanger this extensive sandy pasture. -
Evaluation of the interaction between environmental factors, cultivation and fertilisation
103-108Views:260The effect of production factors on maize yield was examined in the Látókép Experiment Site of the Centre of Agricultural and Applied Economic Sciences of the University of Debrecen on calcareous chernozem soil between 2001 and 2003. The impact of environmental factors (precipitation, temperature, number of sunny hours), cultivation methods (autumn ploughing, spring shallow cultivation) and fertilisation (non-fertilised, 120 kg N + 90 kg P2O5 + 106 kg K2O, and 240 kg N + 180 kg P2O5 + 212 kg K2O) on maize yield was examined. During the three years, autumin ploughing significantly increased yield by 2.91 t ha-1 in comparison with spring shallow cultivation. The yield increasing effect of fertilisation was observed in each year, although its extent depended on the given crop year and the applied cultivation method. The higher fertiliser dose (240 kg N ha-1) did not cause significantly higher yield in either year. After the evaluation of the observed correlations, it can be established that the yield increasing
effect of fertilisation was higher in the case of autumn ploughing in comparison with spring shallow cultivation. The environmental factors (especially the extent of precipitation) significantly affected the maize yield. -
Impact of fertilisation and the fluctuation of precipitation on the ecophysical and production characteristics of maize
39-44Views:611The aim of this study was to analyse the problems caused by the unfavourable (dry and wet) weather and its consequences in the R1 growth stage of maize (Zeamays L.), as well as their management and the alternatives of preventing yield reduction by using agrotechnical measures fertilisation, irrigation), also, we wanted to examine whether the Chl content measured in the R1 growth phase provides reliable prediction of yield per hectare.
The examinations were carried out in a moderately warm and dry production area at the Látókép Experiment Site of the University of Debrecen, Centre for Agricultural Sciences on calcareous chernozem soil in 2007 and 2008. Six different N doses (0,30,60,90,120,150 kg ha-1) were used in the irrigated and non-irrigated treatments of the field experiment.
The results showed that there is a significant strong positive correlation between Chl content and yield both in the non-irrigated (P<0.001, R=0.777) and the irrigated (P<0.001, R=0.801) treatment. The results of the correlation analyses performed yearly showed that weather factors significantly influence the strength of correlations, but these correlations are always positive.
The Chl content of maize leaves provided a reliable prediction of yield per hectare in the R1 growth stage. In the irrigated treatment, the correlation is always closer than in the non-irrigated treatment.
-
Evaluation of mineral element content of beetroot during the different stages of the growing season
459-469Views:616In modern nutrition, bioactive materials of different vegetables are especially important to be researched. The experiment was carried out on March 30, 2016 (sowing date). Mineral element content (B, Ca, Cu, Fe, K, Mg, Na, P, S, Zn) was evaluated on the 60th, 85th and the 105th day of the vegetation period. The data are presented as the mean of five varieties which can give the real state of these parameters of beetroot grown on lowland chernozem soil.
In the young beetroot leaves (60 days) the mineral element content was higher than in the older ones (85 days). The calcium and magnesium content of the leaves was much more favourable (10 times higher) than in the root. The potassium content of leaves has reached the amount of 5000 mg kg-1, but at the same time more than 3000 mg kg-1 was detected in the improved root. This value is favourable for the potassium supply of the human organism.
The sulphur content (1300 mg kg-1) of the leaves was the highest on the 85th day of vegetation period. Similar tendency was detected for boron content (2.45 mg kg-1), while for iron content it was higher (28.23 mg kg-1) in the younger leaves (60 days).
Finally, it can be concluded that the increased element content of beetroot leaves will be a favourable source of mineral element supply of the human organism.
-
Microbiological and Chemical Characterization of Different Composts
106-111Views:202Composting of agricultural waste is considered particularly important from the point-of-view of environmental protection. Degradation of organic substance results in a significant reduction of waste volume.
The end product of the composting process, mature compost, can be used as soil coverage against excess loss of wastes, for mulching, for organic manure etc. The problem of composting has come into limelight in environmental studies and in agriculture.
The quality of the mature compost is determined by physical, chemical and biological parameters of the composting process which, in turn, depend on initial composition of the raw materials, the technology, e.g. regular mixing and moistening and on environmental factors. Quality is the key question in compost use.
We studied the composting process in compost windrows of different raw material composition. We measured temperature, humidity content, pH, organic substance content, nitrogen and carbon content.
We counted the number of bacteria, microscopic fungy, ammonifying and cellulose decomposing microorganisms. We directed the composting process with turning weekly (to provide oxygen) and watering (to provide humidity content 40-60%).
We set up windrows of 1 m3 volume from dry plant substances (cornstalk, pea straw, tomato stalk and crop, weeds) and cow manure not older than 1 week. The cow manure was used at ratios of 0%, 35%, 50%, 65% and 100%, respectively.
We measured changes in compost temperature relationship with outside temperature until they were almoust the same. Humidity was 40-60% in most cases.
At the beginning of the process, pH was slightly acidic-neutral; it later becomes neutral-slightly alkaline (pH: 6.93-8.02) as ammonia is liberated from proteins.
At the end of the process, pH decreased again, due to humification.
Organic substance content decreased as microorganisms mineralized them. Organic carbon content decreased gradually due to microorganisms used it as an energy.
Total nitrogen content increased until middle of july and decreased gradually until than.
The carbon/nitrogen rate were higher in the beginning, it decreased until july-august and increased by smaller degree until end of the process.
The number of bacteria was higher in the first three weeks and between june-september. The number of cellulose degrading bacteria was the highest in the first three month, the number of ammonifying bacteria was the highest from the end of may until sepember.
The number of microscopic fungy was significant in the second part of process, after july. -
The Usage of New Multispectral Satellites in Agro-Environmental Protection
282-289Views:618GIS, and especially remote sensing, offers great help in performing agro-environmental protection tasks. It can process a large amount of data to an arranged set of databases, and is also an excellent source of information. Moreover its keeps the geographical coordinates of all data during processing. The usage of remotely-sensed data is one of the most up-to-date and effective ways to observe, analyze and understand the complex phenomena taking place in all the spheres of agricultural production (soil, water, air), and also to track and monitor the changes of different environmental parameters, as they constantly change in time and space. Several indices will be described, which can be derived from remote sensed data. Next, a relatively new hyperspectral satellite sensor (MODIS) will be introduced, as it can be a input data source in research performed in agri-environmental protection. Last, a new meteorological satellite (MSG-1) will be introduced, as its data are available for public usage, and it could be an important data source.
-
Development of maize production technology that increase the efficiency of bioethanol production
17-26Views:464Maize is one of the most important crops worldwide and also in Hungary, it can be utilized for multiple purposes: as a feedingstuff, for human nutrition and for industrial processing. In the last decades, the per ha yield of maize varied greatly in Hungary, between 2004 and 2006, it was 6.82-7.56 t/ha, while in 2007, it was only 3.6 t/ha. Resulting from this, the price of maize became 2-2.5 times higher. The high price hinders bioethanol production. The largest per ton amount of bioethanol, 387 l, can be produced from maize.
In addition to its classical utilization as feed and food, the industrial use (especially for bioethanol production) of maize is increasin.
For industrial production, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2007.
The applied fertilization treatment was N 120, P2O5 80 uniformly, and five different dosages of potassium: K2O 0, K2O 100 (KCl), K2O 100 (Kornkáli), K2O 200 (KCl), K2O 200 (Kornkáli) kg/ha active ingredient. The applied plant densities were 40, 50, 60, 70, 80, 90 thousand plants/ha.
The yield of maize hybrids in the fertilization experiment ranged between 10.53 – 14.62 t/ha. Both regarding the form and dosage, 100 kg/ha Kornkáli proved to be the best potassium treatment. Regarding the inner content parameters, the highest starch content in the average of treatments was obtained for the hybrid PR36K67: 73.57%, and its yield was also the highest, so this hybrid proved to be the most suitable for bioethanol production. The highest protein content was observed for the hybrids KWS 353 (12.13%), which can be favourable for feeding purposes.
Most of the hybrids gave the highest yield at 80 thousand plants/ha plant density, however, hybrids PR36K67 and Mv Tarján achieved the highest yield at 90 thousand plants/ha.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance. -
The effect of NPK fertilization and the plant density on maize yield and bioethanol production
13-18Views:461For industrial (bioethanol) production of maize, a new production technology is needed. I tested and selected hybrids appropriate for this purpose and set up fertilization and plant density experiments. The experiment were set up on chernozem soil in 2008.
In bioethanol production, the selection of a high-yielding hybrid with high starch content, a slight reduction of N, increase of potassium, the application of the highest plant densities of the optimum interval, harvest at full maturity (when starch content is the highest compared to protein content) are of great importance. -
Laboratory and small plot fungicide trials to control potato late blight (Phytophthora infestans) next to Sepsiszentgyörgy town (Romania)
72-72Views:258Our experiments were carried out during 2009 and 2010 years on Szépmező field, next to the Sepsiszentgyörgy town, Kovászna county, Romania. The experimental area situated at 520 - 580 m altitude, its soil is a humus rich chernozem, the yearly average temperature is between 7 - 8 oC, the precipitation is 500 - 600 mm/year. 7 different fungicides efficacy were studied for control to potato late blight disease caused by Phytophthora infestans on three potato varieties, viz. Ostara, Santé and Desirée.
In the laboratory the fluanizam (500 g/L, ALTIMA 500) fungicide was the best in inhibition of growing fungus while on the field trial plots cymoxanil + famoxadone (22.1 + 16.6%, EQUATION PRO WP*) and metalaxyl** + mancozeb (200 g/L + 1.600 g/L, RIDOMIL MZ 72WP) were the most effective. This facts were confirmed by statistic Duncan-test and data of yields.
The appearance of Phytophthora infestans epidemic was influenced by the climate conditions too during May and June when the minimum temperature was 12 oC, and the maximum 20 oC, the rain quantity more than 120 mm, the air humidity above 75%, these conditions promote the appearance and spread of fungus.
-
The effect of NPK fertilization and the number of plants on the yield of maize hybrids with different genetic base in half-industrial experiment
103-108Views:528In our research we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of maize.
The experiment took place in Hajdúszoboszló on chernozem soil, on a nearly 8 ha field. The size of one plot was 206 m2, this it was a halfindustrial experiment. We tested six hybrids with different genetic characteristics and growing seasons. I analysed the correlation between the nutrient supply and the yield of maize hybrids with control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. Yield increasing effect of the fertilizer also depended on the number of plants per hectare at a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants/ha.
In Hajdúszoboszló, in 2015 the amount of rainfall from January to October was 340.3 mm, which was less than the average of 30 years by 105.5 mm. This year was not only draughty but it was also extremely hot, as the average temperature was higher by 1.7 °C than the average of 30 years. In the critical months of the growing season the distribution of precipitation was unfavourable for maize: in June the amount of rainfall was less by 31mm and in July by 42 mm than the average of many years.
Unfavourable effects of the weather of year 2015 were reflected also by our experimental data. The yield of hybrids without fertilization changed between 5.28–7.13 t ha-1 depending on the number of plants.
It can be associated also with the unfavourable crop year that the yield of the six tested hybrids is 6.33 t ha-1 in the average of the stand density of 60, 70 and 80 thousand plants per hectare without fertilization, while it is 7.14 t ha-1 with N80+PK fertilizer treatment. That increase in the yield is only 0.81 t ha-1, but it is significant. Due to the especially draughty weather the yield increasing effect of fertilizers was moderate. In the average of the hybrids and the number of plants, increasing the N80+PK treatment to N160+PK, the yield did not increase but decreased, which is explicable by the water scarcity in the period of flowering, fertilization and grain filling.
The agroecological optimum of fertilization was N 80, P2O5 60 and K2O 70 kg ha-1. Due to the intense water scarcity, increased fertilization caused decrease in the yield. As for the number of plants, 70 000 plants ha-1 proved to be the optimum, and the further increase of the number of plants caused decrease in the yield.
-
The effect of and interaction between the biological bases and the agrotechnical factors on maize yield
83-87Views:323The effect of and interaction between the biological bases and the agrotechnical factors on maize yield In our research, we examined the effect of the hybrid, the nutrient supply, the number of plants and the abiotic factors (temperature, amount of precipitation) on the yield, crop quality and yield stability of maize. We devoted special attention to the natural nutrient utilization ability and fertilizer reaction of maize. The experiment took place in Hajdúszoboszló on chernozem soil, on a nearly 8 ha field. The size of one plot was 206 m2; therefore, this experiment was half-industrial. We tested six hybrids with different genetic characteristics and growing seasons.We analysed the correlation between the nutrient supply and the yield of maize hybrids with a control treatment (treatment without fertilization) and with N 80, P2O5 60, K2O 70 kg ha-1 and N 160, P2O5 120, K2O 140 kg ha-1 fertilizer treatments. The yield increasing effect of the fertilizer also depended on the number of plants per hectare to a great extent. The number of plants of the six tested hybrids was 60, 70, and 80 thousand plants ha-1.In 2015, the highest yield was produced by hybrid P9241 with N80+PK and 70 thousand plants per hectare. With the N160+PK fertilizer dosage, the same hybrid responded the best, followed by hybrids P9486 and DKC4717. Using the same fertilizer treatment, the 80 thousand plants per hectare population density resulted in decrease in the yield with most of the examined hybrids. In 2016, with the increase in the number of plants per hectare, even with non-fertilised treatment (control treatment), the yield could be increased in the case of each hybrid.Averaged over the different hybrids and fertilizer treatments, applying 80 thousand plants ha-1 instead of 60 thousand resulted in 1.0 ha-1 yield increase. In 2017, the number of plants had a slighter effect. With N160+PK treatment, in most cases no significant difference can be observed. The value of LSD5%: plant number: 0.20 t ha-1, hybrid: 0.28 t ha-1, interaction: 0.48 t ha-1. With N160+PK treatment, the hybrids produced yields between 10.07 and 12.45 t ha-1. When examining the three years in the average of the number of plants, with treatment without fertilisation, the average yield of hybrids reached 7.53 t ha-1. With N80+PK treatment, this value was 9.71 t ha-1 and with doubling the fertilizer dosage, this value increased to 10.42 t ha-1. No economic profit was gained as a result of applying double dosage of fertilizer; therefore, the N80+PK dosage can be considered ideal. -
Pathogenic fungal pathogens and diseases: a mini review of effects on maize production
93-102Views:479Maize, the most important cereal globally in terms of nutrition and income, is highly susceptible to biotic stresses caused by various pathogens, including fungi, bacteria, viruses, nematodes, and parasitic plants. This review gives an account of the epidemiology, diversity, and effect of fungal diseases on maize, with a focus on common pathogens, namely Ustilago sp. and Fusarium sp. Additionally, the review explores the major contributors to the pathogen and disease development, namely: soil quality, temperature, and humidity. Clarity is made herein about the damages and effects on maize growth, including development, yield, and grain quality, with marked economic losses recorded annually. The increasing threat of climate change escalates the dangers, pointing out the urgency for sustainable control strategies of the diseases. Conventional methods of using chemicals have been rendered inadequate for maize fungal disease control, underscoring the need for applying biopesticides and natural products obtained from microorganisms as innovative, remediation strategies. Together with these innovations are biocontrol agents that provide better solutions for reducing the reliance on chemical formulations as well as strengthening a healthier agricultural environment. Finally, a comprehensive understanding of the interaction between maize pathogens and environmental determinants is vital for the development of more effective integrated pest management strategies to enhance maize productivity and subsequent food safety.
-
Effect of different production types on the yield and ß-carotene content of sweet potato /cultivar Ásotthalmi- 12/
45-49Views:493Production of sweet potato is extending in Hungary, despite the fact that there is no field-specific production technology. Therefore, many growers cannot utilize potential yields and quality. The goal of this study was to determine the optimal production method of the Ásotthalmi 12, a Hungarian sweet potato cultivar which can adapt to the Hungarian climate. The effect of single and twin rows production on the yield of this cultivar was examined. The planting was carried out on June 24th, the harvesting on October 20th and the growing-season was 120 days long. Uniform nutrient supply was applied to the whole field experiment. During basic fertilization, 206 kg Knd 20 kg N, 36 kg P ha-1 were used on the soil. While forming the ridges, we used an additional 25 kg N, 45 kg P and 62.5 kg K ha-1. We adopted drip tape irrigation on the experimental field. After the planting, from the 8th week of the vegetation, another 21 kg ha-1 K, 10 kg ha-1 MgSO4, and 2 kg ha-1 Ca(NO3)2 was added in one dosage weekly, until the 13th week of vegetation. At the evaluation of the experiment, we examined the yield regarding the whole experimental plot. SPAD and fluorescence measurements were carried out on 08.16. 2019, 08.28.2019, and on 09.13.2019, during the watering break. To demonstrate the difference between the dates, we applied ANOVA and Tukey post-hoc tests. For the measurement of phytonutrients HPLC, a liquid chromatograph was used, where the carotenoid content of the Ásotthalmi 12 cultivar was determined in connection with the different production methods. Test results showed that twin rows production leads to a nearly 30% greater yield, than single row production. We determined, that the growth of yield correlates negatively to the ß-carotene content of the Ásotthalmi 12 cultivar sweet potato.
-
The impact of applying foliar fertilizers on the health condition of maize
105-109Views:462The nutrient supply of plants is becoming more important in plant protection since the appropriate condition of plants can be ensured by optimal and satisfactory nutrient supply to avoid nutritional deficiency diseases. Due to the extreme weather conditions, plants are forced to face several stress factors, which leads to deterioration of the plant health. The increasing occurrence of droughts poses threat to nutrient uptake through the roots since all the nutrients can be accessible to the plants only if they are in dissolved form in the soil – which is not possible in the absence of water. Therefore, the importance of foliar fertilizer is becoming a more and more significant part of the nutrient supply, because with the help of this technology the development of any nutrient deficiency can be prevented.
In this experiment, we focused on the efficiency of two different foliar fertilizers on maize. Foliar fertilizers were applied two times, once in the stage with 8 leaves and tasseling phenophase of the maize. To verify the efficiency of the foliar fertilizers, the chlorophyll content of untreated and treated plant’s leaves was measured after each application. Moreover, the length and diameter of maize cobs, thousand kernel weight, protein, oil and starch content were also measured, and the results were compared to the untreated (control) ones. According to the results, in all aspects significant differences were observed and due to the laboratory analysis of leaves, in the case of magnesium and zinc supply the foliar fertilizers were able to prevent the development of nutrient deficiency.
-
The Effect of Year and Irrigation on the Yield Quantity and Quality of the Potato
12-16Views:533In Hungary, the growing area of potato area reduced dramatically in the last few decades, additionally we are lagging behind the Western European countries as regards yields and the competitiveness of production is further decreased by the great alternation in yields from year to year, the unpredictable market conditions, bad consumption habits and many times unfortunately the lack of quality products.
The ecological and climatic conditions of Hungary are not everywhere suitable for potato, in the area of Debrecen the amount of rainfall was lower, and the monthly average temperature was higher than the requirement of potato in its growing season in 2002 and 2003.
The experiment was carried out at the experimental site of the University of Debrecen, Farm and Regional Research Institute, at Látókép. In our experiment we examined the yield and some quality parameters of 8 and 9 medium-early varieties in large parcels in 2002 and 2003 respectively. Out of the examined varieties 3 are of Dutch, and 6 are of Hungarian breeding.
The experiment was set up on 49.5 m2 parcels on calcareous chernozem soil after winter wheat as a forecrop in both years. The 9 varieties were examined in 4 repetitions in randomized blocks, out of which two repetitions were irrigated, and two were non-irrigated.
We examined the yields of the varieties, the distribution of tubers according to size and their percentages, and the changes in specific parameters of quality and inner content due to irrigation. We studied the dry matter content, the starch content, the under-water mass, the amount of reducing sugars, the colour index of frying and the element contents of tubers.
Summing up, it can be stated that among the agrotechnical year effect, variety and irrigation factors have considerable impact on potato yield quality and quantity. On the basis of our results, it can be stated that in potato production variety should be chosen in accordance with the aim of production and technology should be adapted to that specific variety. -
The effect of the sowing time on the yield and oil content of sunflower (Helianthus annus L.) in different crop protection models
57-61Views:333The field research was carried out at the experimental farm of the University of Debrecen at Látókép on calcareous chernozem soil in Hungary. We examined the effects of the sowing time and the fungicide treatment on the yield, oil yield and oil content of two different genotypes of sunflower hybrids (NK Ferti, PR64H42) in 2012 and 2013. We applied three different sowing times (early, average, late) and two different treatment levels of fungicides (control =no fungicides applied, double fungicide protection).
During our research, we received better results in 2013 than in 2012. The application of different planting times affected the yield and oil yield production and the oil content as well. The optimal circumstances for yield and oil yield production were provided by late planting in 2012, while by average planting time in 2013. The highest oil yield results were reached by late plating in both years (except for hybrid PR64H42 in the double treated parcels where average plating time turned out to be more effective). The correlation between the plating time, the yield and oil yield production and the oil content was strong in 2012 (r=0.600**, r=0.639**, r=0.590**). On the other side, in 2013, the correlation was medium between the planting time, the yield production and the oil content.
We applied Pearson’s correlation to analyze the effect of the double fungicide treatment on the yield and oil yield production (2012: r=0.498**, r=0.407**). These results were better in 2013 (r=0.603**, r=0.623**), besides, the double fungicide treatment also increased the oil content (r=0.315**).
-
Energy use – in terms of efficiency
61-66Views:453In the recent decades it has become apparent that the human race can lead to a polluting and energy- wasting lifestyle and the depletion of natural resources and an ecological disaster as well.
Energy efficiency is the realization of the chance to see a wider use of renewable energy. Renewable energy sources can be found in large quantities in Europe. A proper exploitation of these would be important because of the "traditional" energy sources’s sate is very critical in many ways.
The utilization of renewable energy sources depends on many factors. The local natural conditions significantly determine each country's different renewable energy potentials. I find to be important the natural conditions, such as, solar radiation intensity , the number of sunny days per year, the wind conditions , the volume and their energy characteristics of the geothermal power resources , land features , soil and rock quality, the supply of fossil fuels or the nuclear possibilities of energy production. The economic environment is also a major influencing factor for the utilization of renewables. The conditions of price of fossil fuels (natural gas, oil and coal), the price of nuclear fuel production and other energy costs significantly influence the demand for renewables, as well as the level of subsidy and government tax policy. In addition, the international and national programs, objectives, strategies, subsidies and regulatory measures as well as technological factors can have a significant impact.
In my paper I point out the opportunities of renewable energy should be given to live. Nowadays the positive effects of their use is undisputed. In addition to the environmentally friendly produced energy, we should strive for energy conservation and energy efficiency as well. These expectations appear in practice, which can be directly perceived by citizens, in fact we should live accordingly. Furthermore, the environmentally relevant regulations of living conditions should appear as environmental demands.
-
Evaluating economic value properties of different beetroot varieties
137-142Views:400The root vegetables have a pivotal role in the vegetable consumption and to form a healthy diet. The consumption of natural juices, like apple-beetroot are becoming more popular and the drying-, the pharmaceutical- and canning industry require more beetroot to process. For the processing, the industry requires easily peeled and round shaped roots, therefore to use the proper variety is very important. The primary quality parameters are the inner color intensity, uniform color and water soluble dry matter content.
4 beetroot varieties were evaluated (Libero, Rubin, Detroit 2 and Cylindra) in the 3 years experiment which was carried out at the University of Debrecen, Institutes for Agricultural Research and Educational Farm, Botanical and Exhibiton Garden. The soil type was calcareous chernozem. Leaf length, shape index and water soluble solid content were measured, and sensory evaluation was carried out on taste, inner color intensity and white ring.
To summarize, we can state the exception of Rubin genotype all of the varieties are suitable for second cultivation and good for processing (canned, juice, powder). -
Using sensors in precision crop production
267-270Views:323Proper plant nutrition that takes into consideration both the requirements of plants and ecological conditions is one of the most important precondition of successful plant production. An important element of the N-fertilization of wheat is that the optimum zone of nitrogen supply is significantly narrower than that of other plant species, therefore it can easily happen that we apply higher or lower nitrogen doses than the optimal one. A possible solution to this problem can be precision agriculture. Applying the methods of precision agriculture we can take into consideration the heterogeneity of fields. By applying precision methods either online or offline we can intervene faster than if we would rely only on regular soil and plant analysis procedures. The determination of the doses of nitrogen and the timing of application are influenced also environmental and
economic aspects. The chlorophyll content of the leaves indicates the nitrogen status of plants, since there is a relationship between the nitrogen content and the amount of chlorophyll in the leaves. According to plant analysis results there was a strong and significant relationship between the values of the NDVI (Normalized Difference Vegetation Index)and the total nitrogen content measured in the leaves. -
The effect of plant density on the yield of sweet potato
125-128Views:781A field study was conducted in South-East Hungary during the main cropping season of 2016, 2017 and 2018, with the objective of determining the effect of plant spacing on the productivity of sweet potato. Production technology experiments of four repetitions were set up in a randomized block design on sandy soil. The performed treatments consisted of four variations of plant spacing (row distance x plant-to-plant distance): 80 cm x 20 cm, 80 cm x 30 cm, 100 cm x 20 cm, 100 cm x 30 cm. The plant material was the Hungarian registered sweet potato variety ‘Ásotthalmi-12’. Analysis of variance revealed that planting density significantly affected the average yield of storage roots. The highest yield per plant was achieved with the 100 cm x 30 cm (2016, 2017), as well as with the 80 cm x 30 cm (2018) setups. On hectare level, our results showed that the highest plant density of 62,500 plants ha-1 (80 cm x 20 cm setup) could give the highest yield. Comparing the highest tons ha-1 results to those achieved with the plant spacing setups resulting in the highest yield per plant, the differences can be even 13 or 14 tons at hectare level. This finding underlines the importance of choosing the proper planting density towards the higher end.