Search
Search Results
-
The importance of selenium in the living world and in the scientific research
278-286Views:137Presently, selenium (Se) is one of the most investigated microelements. It has an important proven role in many vital processes. Directly or indirectly, selenium deficiency can play a role in the development of many diseases. On the other hand, the concentration range in which selenium is essential is narrow; there is a narrow gap between necessary and toxic content in dietary intake. In this context, selenium contamination poses a further health risk for people if they live near the industrial areas and mining activity.
In this paper, we comprehensively introduce the very important trace element selenium. We studied the base parameters, deposit, analytic and deficiencies, problem of contamination and also the solution of contamination problems of selenium. -
Mitigation of the effect of secondary salinization by micro soil conditioning
115-119Views:184This research has the general goal to meet the customization of agriculture in small scale farming. We are developing a technique using micro doses of soil conditioners and organic material applied in the root zone of vegetable crops. We expected to change the physical and chemical properties of the affected soil, which has been irrigated with salty water. Two different soil conditioners were tested. A lysimeter experiment including 8 simple drainage lysimeters was set up in the Research Institute of Karcag IAREF University of Debrecen in 2017. The main goal was to study the effect of different soil conditioners on the soil endangered by secondary salinization induced by irrigation with saline water. In order to compare the difference between the treatments, we collected soil samples, water samples, and determined the yields. Chili pepper (Capsicum annuum) was used as an indicator crop during one specific agricultural season. The technique called micro soil conditioning is rational because several reasons. The roles of the technique are various, for example it can serve as a source of carbon or a container for soil amendments and can minimize evaporation. We found this technique not to interfere with the chemical reaction or the interaction with the plants. However, the micro doses of soil amendments had the role to minimize the risk of soil degradation and do not significantly influence soil respiration. In addition, by improving soil properties, soil conditioning increases the leaching of the excess of salts from the root zone. In fact, this technique can decrease the cost of the inputs and improves the production of vegetables, and at the same time mitigates the effect of secondary salinization.
-
Environmental friendly irrigation of vegetables with high salt content water
115-119Views:150Horticultural activities have been characteristic in the hobby gardens located in the northern and western areas around the town of Karcag for more than 300 years. During the droughty summer periods, characteristic to the region, the water demand of vegetables and fruit trees are covered by irrigation, for that the water is gained from drilled wells. These well waters contain high amount of dissolved salts contributing to the secondary salinization of the soil. Taking these facts into consideration an irrigation experiment was set at the lysimeter station of Karcag Research Institute. Our goal was to mitigate the risk of secondary salinization generated by irrigation with waters of high salt content and to survey the application possibilities of soil preserving irrigation.
-
Possibilities of conceptualization and operacioanlizaton of the safety culture and safety climate in the international safety management researches
117-126Views:55In this paper the author summarized the definitions and operationalisations of the safety culture and safety climate concepts. He analyzed the Hungarian and international safety
management scientific literatures. He also analyzed the scientific definitions and summarised the common and different elements. The author emphasizes that the many different scientific safety culture researches had been created good possibilities to find the common surfaces. Based on the international safety culture operationalisation practices the author identified a composition of safety culture dimensions which could be a possible basis for the Hungarian safety culture researches. These dimensions are:
???? values (individual and organizational) from this result scale of values,
???? attitudes (individual and organizational),
???? motivations,
???? perceptions,
???? social status and estimation of the occupational safety and health,
???? position and estimation of the occupational safety and health communication,
???? position and estimation of the occupational safety and health tranings,
???? measuring of confidence, optimism, fatalism and anomic characteristics,
???? good practices and behavior,
???? influence and estimation of the work,
???? risk perception and safety level perception,
???? contentment.with occupational safety and health. -
The importance of millet production in regional production, with special emphasis on climate change
141-146Views:137Regional production is a traditional production structure developed adjusting to the geographical, climatic, biological and soil conditions in given production regions, a certain territorial specification of agricultural production, and a type of farming that best fits the natural conditions and takes the biological needs of plant and animal species into account as fully as possible. The most probable element of risk in plant production is the changeable, extreme weather. That is the reason why the specific characteristics of the place of production and the characteristics of regional production should be considered to a greater extent. The establishment of the range of varieties appropriate for the place of production is the key issue in regional production. One of our historically grown cereal plants that perfectly fits regional production is millet. Due to its short growing season, favourable reproduction ratio and the fact that it is relatively undemanding, it used to be grown in larger quantities in the middle ages. Its good nutritional values made it an important food item, but over time, as a result of industrialisation and technological progress; it has been eclipsed by other cereal crops. In our country it is mainly used to cook porridge, but it is also used in the form of flour and as a base material in the spirit drinks sector. In the recent decades, millet has been applied only in a small area, mostly as a secondary crop in areas that dried out from drainage water in late spring, or as a replacement of extinct sowings due to its late sowing time. Water will be the most significant factor for the future of agriculture, especially considering climate change.My examinations took place in the area of the Institutes for Agricultural Research and Educational Farm of University of Debrecen, in the Research Institute of Nyíregyháza, in a small-plot experiment with four replications in 2016. -
Spatial Relationships Between pH and Vegetation Pattern in an Area Contaminated with Heavy Metals
140-143Views:74It is not possible to gain information on the risk factor representing the bioavailability and the mobility of the contaminants only on the basis of their total concentrations. Especially, in case of heavy metals, which can be charaterised with very different chemical forms and their mobil and mobilizable parts are determined by complex balances highly sensitive to the changing environmental conditions. Considering mine tailings, however, the toxic elements are basically in ore forms having low adsorption capacity, thus the heavy metal ion concentration in solution is governed mainly by the pH conditions. In Gyöngyösoroszi, the spatial distribution of the total heavy metal concentrations as well as that of pH values determining the bioavailable part of the toxic elements were estimated and by mapping the vegetation pattern, relationship was analysed among the total Zn, Cu, Pb and As concentrations, the pH and the species present. Results show that the presence of the certain plant species is highly determined by the pH on the mine tailing material, the highest vegetation density was found where the bioavailability of the toxic elements were considered the smallest as a result of the neutral pH. As a result, high diversity could be found even in places where the total zinc, copper, lead and arsenic concentrations were extreme. In addition, plant species could be identified, which are tolerant to toxic elements and present even if the pH is low and the bioavailable part of the heavy metals is relatively high.
-
The factors affecting the proliferation of mould fungi and mycotoxin production during the storage of wheat and the identification methods of the appearing branches
129-133Views:120Nowadays, it is often suggested that, we should eat products made with whole grain cereals, despite of the fact that it raises the risk of consuming wheat products infected by mold and their toxins originated from the plough-lands and the stocks.
Two third of the cultivated fields in Hungary are planted with cereals. The most alarming problem for food and feed security is caused by the Fusarium species. The greatest problem of all is caused by the mycotoxins. When they get into the food chain they can be a serious threat to public health. In addition, we have to face up to the problem of the effects of global warming that influence the growth of microbial infections in different ways.
In this article we tried to summarize the effect of climate change on molds, the factors which have effect on growing and mycotoxin producing of molds and the identification methods of molds. -
Effect of season and sowing time on the moisture loss dynamics and yield of maize
255-265Views:149The effect of sowing date on maize development and yield was studied in field experiments. The experiment was set up at the experimental garden of the University of Debrecen Centre of Agricultural Sciences Faculty of Agriculture, Department of Plant Sciences in 2005 and 2006 on calcareous chernozem soil. Six hybrids with different genetic characteristics and vegetation period were tested (Sze 269, DK 440, PR37D25, NK Cisko, Mv Maraton, PR34B97) at three different sowing dates.
2005 was a very wet year. The amount of precipitation in the vegetation period was about 150 mm higher than the average of 30 years. No significant differences were observed in temperature. However, the number of sunny hours was much lower during the summer than as usual. This had an influence on yields.
In 2006, there was no risk of inland water in spite of the large amount of precipitation at the beginning of the year. The amount of water available for plants was satisfactory during the season due to the favorable amount of precipitation. Therefore, plants suffered less from the heat in July. However, hail on 22 July caused significant damage. The number of sunny hours in the summer was high enough. The warm, dry autumn helped the water release of plants.
In 2005, the results of the third sowing date could not be evaluated due to the large number of missing plants. The yield of hybrids ranged between 12-14 t/ha for the first sowing date. For the second sowing date, yields ranged between wider boundaries. The hybrid PR37D25 has a very high yield in the case of the second sowing date, and its seed moisture content was favorably low. The yield of hybrid PR34B97 was the lowest at the later sowing date, the prime reason of this was damage caused by Diabrotica virgifera. The seed moisture content at harvest varied between 16-24% for the first sowing date. In the case of the second sowing date, higher values were measured. Hybrids Sze 269 and NK Cisko had favorable water release characteristics. The maximum value of leaf area index was the best in the case of the first sowing date (5-5.5 m2/m2).
In 2006, yields for the first sowing date ranged between 8-10 t/ha. At the second sowing date, more favorable results were obtained. The reason for this is probably that hail caused a higher damage in hybrids with the early sowing date. Plant stock with later sowing date could recover more successfully. Hybrid PR37D25 had very high yields for the second and third sowing dates. The high-yielding hybrid PR34B97 also had high yield, but this was accompanied by higher seed moisture content. Due to the warm, sunny autumn weather, the hybrids had good water-release dynamics and were harvested with a lower seed moisture content than in the previous year. For the first sowing date, the seed moisture content was around 13-14% except for hybrid PR34B97. For the second and third sowing dates, higher values were observed. Leaf area index was significantly reduced in August for all three hybrids due to the hail in July. For the first two sowing dates, the leaves of hybrid Sze 269 were the first to dry similarly to the previous year.
Year had a strong effect on the results in both years. -
The toxicity of different selenium forms and compounds – Review
33-38Views:1382Selenium (Se) is an unusual metalloid of considerable interest from both a toxicological and a nutritional perspective, with a very narrow safe range of intake. Although there are many reports about its detoxification properties, toxicity aspects of it have also been tracked for several decades. Lots of studies demonstrated that low Se is an efficacious avail whereas high Se can induce toxicity and the significant toxicity of selenium emphasizes the need to assess the health risk of various selenocompounds as nutritional supplements. The toxicity of different forms and compounds of selenium is also summarized in this review.
-
Wheat cleaning and milling technologies to reduce DON toxin contamination
89-95Views:167Mycotoxicosis caused by Fusarium fungi holds a huge risk considering economic and food safety issues worldwide. By applying milling technologies, we attempted to reduce the concentrates of DON toxin, as it is the most often found toxin in wheat.
The processes of sieving, aspiration and combination had been used on wheat with high DON toxin concentration. As a next step, grains were sorted using a horizontal cylinder separator, assorted by an optical and a gravity separator, and finally, the products were scoured and ground. The contamination level of the wheat and flour samples were defined by the HPLC-MS method.
Regarding the results, it can be stated that toxin concentration was most effectively reduced by optical separation and scouring, and by applying these milling techniques, food safety can be increased significantly.
-
The effect of reduced sprinkler programs on the main fungal pathogens of apple in environmentally sound production systems
13-16Views:75Aim of our two-year study was to evaluate the possibilities of chemical use against key fungal pathogens (apple scab, apple powdery mildew and brown rot) in integrated and organic apple production. Therefore, first, disease incidence was compared in standard and reduced spray programmes and then each technological variation was evaluated from practical point of view. Altogether four spray programmes were compared. Standard and reduced spray programmes were performed in the integrated production. The same pesticides were used in the reduced spray
programme compared to standard one but numbers of spray were reduced by 25% at the second half of the season. Standard and reduced spray programmes were also performed in the organic production and the numbers of spray were reduced by 40% in the reduced spray programme. Incidence of diseases was low in both standard and reduced spray programmes in integrated production. Diseases level was high in the organic production and disease increased significantly in the reduced spray programmes compared to standard programmes. Results showed that reduction in spray numbers at the second half of the season can be used practically in integrated production. Omission of sprays in organic
production resulted in serious disease management risk; therefore, it is not recommended for practical use. -
Comparative examination of the tillage systems of maize on meadow chernozem soil
21-24Views:147Maize production plays a major role in the agriculture of Hungary. Maize yields were very variable in Hungary in the last few decades. Unpredictable purchase prices, periodical overproduction, the increasing occurrence of weather extremities, the uncertain profit producing ability, the soil degradation processes (physical, chemical and biological degradation) and the high expenses are risk factors for producers. Due soil tillage, there is an opportunity to reduce these risks. Based on the experimental database of the Institute of Land Utilisation, Regional Development and Technology of the University of Debrecen, Centre for Agricultural and the KITE Plc., various cultivation systems were examined with maize (Zea mays L.) as indicator plant in Jász-Nagykun-Szolnok country in 2012 and 2013. The sample area can be found in the outskirts of Kenderes on a meadow chernozem soil. On the examined plot, strip-tillage, subsoiling and moldboard ploughing were performed, each on 4.5 ha, respectively.
In general, our findings show, that strip-tillage and subsoiling can be alternative tillage systems beside moldboard ploughing on meadow chernozem soils in Hungary.
-
Dietary fibre prevalence and its role in human nutrition
9-13Views:203The role of dietary fibre and its impact on health is increasing. It is worth noting that their beneficial effects on the body are becoming more widely known, but their consumption is still below the recommended daily intake from food. Dietary fibre, as a class of compounds, includes a mixture of plant carbohydrate polymers, both oligosaccharides and polysaccharides. Dietary fibre has been linked to a number of diseases, as its consumption can reduce the risk of cardiovascular disease and type 2 diabetes. They influence the composition of the bacteria present in the human gut. Consuming the right quantity and quality of dietary fibre can play a role in the prevention of certain types of cancer. Nowadays, it is common to produce various fibre-enriched foods, called functional foods, because of the beneficial effects they have previously had on the body. In the present work we want to give a general description of dietary fibre and its role in the body.
-
Microbiological quality of bulk tank raw milk from two dairy farms in Hajdú-Bihar County, Hungary
105-112Views:290Two main channels have been identified to be responsible for microbiological contamination of raw milk and milk products. Firstly, contamination has occurred due to udder infection from the cow or the blood which harbours most bacteria that come in contact with the raw milk. Secondly, via external factors (may include faeces, skin, contaminated water, environment etc.) which are associated with the operation of milking. There is direct contact with the milk and/or surfaces before, during or after the milking, posing public health risk and economic decline. The aim of this study was to examine the bacteriological quality of bulk tank raw milk samples collected from two different size dairy farms (Farm 1 and Farm 2) of different housing forms (cubicle loose and deep litter) in Hajdú-Bihar County, Hungary in July, 2017. Three samples were taken from each farm, and the total plate count, coliform count, Escherichia coli count, Staphylococcus aureus count, and yeast and mould count were determined in them.
The results clearly showed low level of all measured bacteria group load in Farm 1 samples in comparison to Farm 2 with the exception of coagulase-negative Staphylococcus (CNS) which represented high level in general, indicating significant difference (P<0.05). The mean value of total plate count in Farm 2 samples was higher (1.0 × 105 CFU/mL) than Farm 1 samples (2.8 × 104 CFU/mL). There was a significant difference (P<0.05) in mean count of coliforms in raw milk samples between Farm 1 and Farm 2. Similarly, results of E. coli were significantly different (P<0.05) with mean count of 1.44 × 102 CFU/mL and 2.02 × 103 CFU/mL for Farm 1 and Farm 2 respectively.
Results of Staphylococcus aureus also showed significant difference (P<0.05) with mean count of 9.7 × 101 CFU/mL for Farm 1 and 6.28 × 102 CFU/mL for Farm 2. The mean of mould count recorded was 1.07 × 102 CFU/mL and 4.93 × 102 CFU/mL for Farm 1 and Farm 2 respectively. The recorded mean of yeast count was 1.68 × 103 CFU/mL and 3.41 × 103 CFU/mL for Farm 1 and Farm 2 respectively; however, both farms showed no significant difference (P>0.05) in terms of mean of mould and yeast count. Although Farm 2 produced six times lower milk quantity than Farm 1, the measured microbial parameters were high. Both farms’ microbiological numbers were higher above the permitted limit values as stated by Regulation (EC) No 853/2004, Hungarian Ministry of Health (MoH) 4/1998 (XI. 11.).
This could be an indication of non-conformance to effective GMP, ineffective pre–milking disinfection or udder preparation, poor handling and storage practice, time and temperature abuse and inadequate Food Safety Management System Implementation. Therefore, our recommendation is as follows; establish control measures for pre- and postharvest activities involved in the milking process which would be an effective approach to reduce contamination of the raw milk by pathogenic microorganisms from these farms, strict sanitation regime and hygiene protocol be employed and applied to cows, all equipment, contact surfaces and minimize handling of the milk prior, during and after milking. This will also serve as scientific information to the producers for continual improvement in their operations.
-
Comparison of Scab Warning Systems in Integrated Apple Production
53-57Views:55In the present study, the suggestions for infection risk and sprays of the most frequently used PC-based scab warning systems (RIMpro and WELTE) and the conventionally used Mills table as a reference were compared in integrated apple production. The efficacy of the spraying programs based on the three different warning systems was evaluated by assessment of apple scab incidences during primary infection periods.
13 and 11 Mills infection periods were detected in 2000 and 2001, respectively, during primary infection periods (from 15 March until 5 June). Taking into consideration the heaviness of Mills infection periods, 11 and 9 sprays were applied in 2000 and 2001, respectively. The two PC-based scab warning systems detected 1-4 less infection periods and suggested 1-3 less sprayings compared to the numbers of infection periods and sprays according to the Mills table. Our results proved that the 9-11 sprays according to the Mills table could be reduced to 7-9 sprays by RIMpro scab warning systems which did not reduce the efficacy and did not increase the symptoms of leaf and fruit scab significantly. The WELTE scab warning systems detected generally one or two more infection periods and suggested one additional spray compared to RIMpro warnings and sprays. -
Delay of flowering in orchards
79-81Views:86The goal of my research was to find out how cooling sprays affect the onset of flowering and the microclimate int he fruit orchards.
Frequent spraying (every 20 minutes) can keep the temperature of trees and buds lower.As a result the onset of flowering occured several
days later in the sprayed trees. It was proven that cooling sprays are suitable for delaying the onset of flowering under the domestic climatic conditions. This procedure can significantly mitigate the risk of frost damage and can improve crop safety. -
Complex assessment of inland water fish stocks
74-80Views:69In the domestic fish production, natural waters have yielded for several years about 7-8 thousand tons. This, from the point of view of outputs, considering the almost 130 thousand hectares of natural water, is rather low, it means approximately 55-60 kg/ha mixed fish.Although the various natural waters can differ significantly on the basis of yields, yet on the majority of the territories, the results were low. In the case of our extensive still waters and rivers, the reason can undoubtedly be found in the combined effect of the lack of the possibility of reproduction of the fish stock and the over-fishing. Fishery built on planning supposes the best possible knowledge in the given circum stances of the parameters of the water area and its fishstock. Lacking this knowledge, it is not possible to establish the optimal use fulness of the resources, what is more, the management can make faulty decisions – as a result of a lack of information -, which can risk the success of later activities.
It is known that many factors have an impact on the success of the fishery, as well as some information in connection with the water area and the fish stock are necessary, the knowledge of which make it possible to manage the fishery in a planned way. One part of the information is available, while the other part is incomplete or not deep enough. The necessary data are dissimilar depending on their nature, can be obtained from different places, by different methods.
As the first step for executing the field surveys and processing data, I developed a complex model, which contains in a unified system the steps of estimating the fishstock. I made the sampling on the basis of this. Part of the model is a fish faunistic survey, as well as a morphological survey of the water area. The information gained from these are important for making more accurate the system of devices of the samplings for stock estimation (duration, number of net-rows) and for assigning its place (places representing the best way the physical characteristics of the given water area). The major stages of stock-survey: A) faunistic survey, B) physical survey of the bed, and C) sampling with the help of gill-nets. This is followed by the evaluation by the computer module.
The results of the research create a methodological and technical background for the fish faunistic and population biologic surveys still performed in different ways in our country, and by applying these methods together, all basic information about natural waters which help decision-making concerning fisheries can be obtaine deffectively. -
Survival analysis of sow longevity and lifetime reproductive performance – Review
75-80Views:254Sow longevity plays an important role in economically efficient piglet production. Improving sow longevity results increase in the productivity and profitability of a sow herd. Longevity is a complex trait with many factors that can contribute to a sow having a long and productive life. Not only the sow’s genetics, but also nutrition, environment and the management policies are important. In addition, the removal of non-productive sows along with the introduction of replacement gilts is an essential part of maintaining herd productivity at a constantly high level. The objective of this paper was to summarize the current knowledge about the sow longevity and lifetime performance values, as well as, discusses the survival analysis methods for sow longevity traits. This method can estimate the hazard rate indicating proportional risk of sows being culled at any given time, in addition, it is able to investigate the effects of different factors on longevity. Identifying factors that influence the longevity could assist many commercial pig producers in becoming more efficient.
-
Study of animal welfare status in dairy cow herds in Hungary – looking for causes of lameness
25-29Views:116In the last 20-30 years, lameness in cattle was found to be third the most influential disease next to mastitis and reproduction disorders. Studies have been established to explore reasons for lameness and prevention. The problem with more robust prevention plans is that knowledge and research evidence is not strong enough to run an effective prevention plan. The aim of the research is to look for reasons of lameness by observing number of cows on 6 farms during 2 lactations. Performance data will be put together to body condition score (BCS) and lameness scores. Other examination is focused on monitoring of 40 farms. This part of the project is more related to extension, collecting and sharing solutions for decreasing lameness. Producers are advised what kind of measures are possible to reduce occurrence of lameness. Effectiveness of those actions will be measured at the end of the study. The first preliminary results show lack in almost all preventive measures needed to be taken in minimizing lameness. Those areas are related to poor facilities, lack of straw, problems with labor and basic management.