Search
Search Results
-
Fruit bearing shoot characteristics of apricot and sweet cherry cultivars in Hungary
107-110.Views:298: Our study was carried out on 23 apricot and 9 sweet cherry cultivars in February 2005. Fruiting laterals were classified into four groups (0-10 cm, 10-20 cm, 20-40 cm and >40 cm) and then the density and setting of flower buds were evaluated and expressed as bud/cm. The flower bud density of four types of fruit bearing shoots and the changes in the frost resistance were studied. Shoots were collected from a young orchard in Gone (apricot), Siófok (sweet cherry) and Nagykutas (sweet cherry). There were significant differences among the cultivars in the density of flower buds. The number of flower buds/cm shoot length ranged between 0.91 and 2.20 in the average of the different fruit bearing shoot types on apricot. Based on the results, the bud density of shorter shoots is generally higher on apricot, but this is not valid for all cultivars. For cvs. Magyarkajszi and Ceglédi bíborkajszi, the highest flower bud density was detected on shoots of medium length (10-40 cm). There were fivefold and almost twofold (1.85) differences in bud density among cultivars on shoots shorter than 10 cm length and longer than 40 cm length, respectively. The ratio of the bud densities of the different types of shoots also ranged between wide boundaries. For cvs. Bayoto, Toyesi and Toyiba this ratio was 2.5-3.5, while for cv. Magyarkajszi it was 1.3.
In the average of fruit bearing shoots on sweet cherry, cv. Bigarreau Burlat (1.10 bud/cm) and cv. Germersdorfi 45 (0.61 bud/cm) had the largest and the lowest flower bud density, respectively. Among the fruit bearing shoots, the largest flower bud density was in the group of 0-10 cm fruiting laterals. Among cultivars, cv. Bigarreau Burlat had the largest bud density. In the groups of n- i 0 cm, 10-20 cm, 20-30 cm and 30-40 cm fruiting laterals, the lowest flower bud density was for cv. Linda, cv. Germersdorfi 45, cv. Ferrovia and cv. Sunburst, respectively. On cvs. Van and Bigarreau Burlat, large numbers of double-set flower buds were observed on the fruit bearing shoots longer than 20 cm. Fruit setting differed on the different types of fruit bearing shoots, with the lowest value measured on above 40 cm shoots. The highest fruit setting was observed on cv. Katalin, while the lowest value was measured on cv. Germersdorfi 3.
-
Bud-, flower- and fruit-density in stone fruits
59-69.Views:343In 164 varieties of five stone fruit species, counts of flower buds, flowers and fruits set have been performed, regularly, between 1982 and 2002. The critical number and sample size has been determined for the purpose to estimate the yielding potential of peach plantations. For a rapid test, 10 shoots per variety are recommended. In sour cherry and peach varieties, the number and ratio of leaf and flower buds has been assessed on bearing shoots of different length.
The typical flower bud density of 129 peach varieties varies, as a rule, between 0.13 and 1.10 bud/cm. Three groups of flower-bud-densities could be distinguished: low (0-0.40 bud/cm), intermediate (0.41-0.60 bud/cm), high (more than 0.60 bud/cm). About 62% of varieties belong to the intermediate group. Negative correlation has been found between flower density and relative fruit set, whereas positive correlation between flower density and fruit yield.
The results are utilised in the description and choice of varieties, moreover, in choosing of optimal pruning policies. Varieties of high flower bud densities are recommended to be preferred for growing sites with frequent late frosts. Abundantly yielding varieties of low vegetative vigour are to be pruned more severely than those characterised by low yields, vigorous growth and low flower density. Sour cherry varieties, which are inclined to grow "whips" ought to be stimulated to grow longer shoots (40-50 cm per year), than varieties woid of that tendency (30-40 cm).
-
Flower density and winter damage of apricot and peach varieties
53-56.Views:291Hungary is located on the northern boundary of economical apricot and peach production. The present assortment of varieties and the actual, not adequately selected growing sites cause a permanent risk of winter and spring frosts in their cultivation. The field observations are performed at Debrecen, the Experiment Station Pallag, on 20 apricot and 21 peach varieties. The flower density among the varieties attained 3-4-fold differences. Three categories have been suggested for both species. The density was inferior in Hungary established varieties compared with the new varieties of foreign origin. The minimum temperatures of January 9, 2009 was –17,6 °C , and of December 21, 2009 also –17,6 °C. In some varieties the damage of buds attained 100%. For estimating the yield security, we need to consider also the flower density and the frost damage together. For a mediocre yield, we need a flower density in both species of at least 0.2 living bud/cm. The results confirm the statement that in Hungary, the revision of growing sites is indispensable in order to develop a profitable and competitive apricot and peach growing industry.
-
Development in intensive orchard systems of cherries in Hungary
76-86.Views:335High density central leader systems, the so called "spindle trees" are spreading in intensive stone fruit orchards established for hand picking in Hungary. Results of Brunner (1972, 1990) and Zahn (1967, 1996) inspired the researchers to implement their theories into practice under our climate and special soil conditions. For sweet cherry it is essential to apply an orchard system appropriate for hand picking because of the European market requirements. In intensive sweet cherry orchards two new training and orchard systems are developed and adapted to environmental conditions in Hungary based on previous inventions. The first step of the development is represented by modified Brunner-spindle, which applies the delayed heading of the central leader and the sectorial-double-pruning system from Brunner (1972), resulting intensive orchard of 600-800 trees/ha density, planted on standard vigour rootstocks. Modified Brunner-spindle trees are developed with a central leader and wide-angled branches on it. Light bearing wood is positioned on the central leader and wide-angled branches. During training, shoots for branches are bent or a sectorial double pruning is used. The growth of central leader is reduced by delayed heading, and the strong upright shoots are pinched in summer. Based upon tree size spacing of 5 m between row and 2.5-3 m between trees is recommended, tree height is around 3.5-4 m. This training system is useful for hand-picking; 60-70% of the crop can be harvested from ground. Modified Brunner-spindle is suitable for either standard or moderate vigorous rootstocks. The cherry spindle is an intensive orchard planted with 1250-2300 trees per hectare and it is recommended for sweet and sour cherries on semi dwarf to vigorous rootstocks, depending on soil fertility and quality. Trees are 2.5-3.5 m high, 75-80% of the crop can be harvested from the ground. Permanent basal scaffolds are developed on the basis of the canopy to counteract the stronger terminal growth. The tree is headed only once, after planting, from the following year the central leader grows from the terminal bud. The central leader developed from the terminal bud results moderated growth in the upper parts of the tree head. The strong upright shoots that may develop below the terminal bud are pinched to 3-4 leaves in the summer or removed entirely. The weaker, almost horizontal shoots growing from the central leader form fruiting twigs in the following year if their terminal bud is not removed. Brunner's double pruning is used only once or twice on the permanent basal branches because of its good branching effect. Trials on various rootstocks are running to find optimum spacing and fruiting wood management. The training and pruning guidelines are discussed in the paper. The average crop of bearing years is around 20-30 t/ha depending on site and cultivars. This new system is spreading in Hungary, around 70 ha sweet and sour cherry orchards are trained according to our guidelines.
-
Security of growing habits and bud formation of German sour cherry varieties
45-48.Views:238Intensive sour cherry production is concerned to find the most productive varieties under special growing conditions. High planting density, adapted to manual picking or on the other hand to mechanical harvesting. Almost as important is the prolongation of the ripening season by enlarging the choice of varieties. Unfortunately, three of our four leading commercial varieties are ripe almost at the same date.
Therefore, new varieties ought to be examined thoroughly. In the Pallag Experimental Station of the Debrecen University, five European varieties have been grown (’Schattenmorelle’, ’PI-SA 12,100’, ’Jade’, ’Gerema’, ’Achat’) and a Hungarian one, ’Debreceni bôtermô’ used as a check for the experiments to compare their growing and yielding habits in 2010. The plantation was three years old, standing on Prunus mahaleb rootstocks, in high density (5 x 2 m) and trained to slender spindle crowns. The results are proving that some of the varieties in
question are suitable to prolong the harvesting season. Growing habits and yields of the varieties related to the variety ’Debreceni bôtermô’ were similar or even better as ’Jade’, ’Gerema’ and ’Achat’. The ’Jade’ excelled with its vitality and ’Gerema’ with its generative character. Further studies are expected to prove the utility of
one of them at least to enlarge the ripening season on the fruit market. -
The effect of bud density on the composition of colour in red wines
63-68.Views:170Authors investigated the effect of fruit load on the composition of colour substances and of reservatrol in red wines of some grape varieties grown in Hungary. The content of both, anthocyanin compounds and reservatrol showed practically the same responses to fruit load and the same profile in all the varieties studied. Determination of these compounds solely is not sufficient to identify the respective grape variety.
-
Impact of boron foliar fertilization on annual fluctuation of B in sweet cherry leaves and fruit quality
27-30.Views:322The goal of the study was to examine response of sweet cherries (Prunus avium L.) to boron (B) fertilization. The experiment was conducted during 2005-2007 in West Hungary on mature cv. `Germersdorfi 3' grafted on Prunus mahaleb rootstock.
Sweet cherry trees planted on a calcareous chernozem soil. Trees were foliar-fertilized with B. Foliar B sprays were performed: (1) in the spring, at the stage of white bud, beginning of flowering (B1), and (2) repeated 5 weeks after full bloom (B2). In each of spring spray treatments, B was applied at a rate of 0.15 kg ha-I. Trees untreated with B served as a control.
The results showed that B fertilization had effect on B concentration in leaf tissues, mostly after ripening. B was present significantly higher amount in leaf in treated samples after ripening.
Mean fruit weight was slightly increased by B fertilization. Fruit sensitivity to cracking was not influenced by B fertilization. Nevertheless, from our data it can be conclude that the sensitivity of fruit to cracking is improved when the fruit is riper, the fruit density and fruit weight are higher. The soluble solids varied between 15.0 and 15.9% according to the treatments. Our results for the monosaccharides investigated varied between 5.1 and 7.2 as glucose and fructose as well. Galactose and sucrose was detected very small amount in the unprocessed cherries. Applied B treatments increased sugar contents but decreased organic acid contents in sweet cherry fruits.
It is concluded that under conditions of this experiment, B fertilization can be recommended in sweet cherry culture to improve fruit quality and their appearance.