Search
Search Results
-
Improving Safety & Ride Comfort through Dual Suspension System in Road Vehicles
30-36Views:175The essential objective of the proposed suspension framework is to limit the undesired disturbance of a vehicle because of uneven surfaces on streets. This framework in vehicles is comprise of some fundamental components like dampers and springs which ingests the stuns that are instigated by unusual streets. In any case, these frameworks can just work up to a predefined constrain. Vehicle suspension frameworks are planned by taking the solace capacity of a traveler in record and to enhance the street grasp on each surface.
This examination proposes an idea for structuring a superior suspension arrangement of vehicles to upgrade the nature of the drive without corrupting the dependability of the vehicle plan. In this exploration, a mix of two suspension framework is presented in which one goes about as an essential suspension while different fills in as an optional framework that can adequately lessen the vibrations. This mix upgrades the customary framework that is right now introduced in vehicles without bargaining on solace and street hold.
-
Maintenance of Electric and Hybrid Vehicles
37-46Views:484An electric car is a vehicle powered by one or more electric engines, utilizing energy stored within batteries that are rechargeable. The first register of a usable electrical vehicle dates from 1880s. A hybrid vehicle incorporates two or more different power types, including, e.g., gasoline engines and electric motor. The goal in this work is to present the overall overview of the structure of the electric, hybrid and electric-hybrid vehicles, advantages and disadvantages of these types, the main points to focus when maintaining these and the challenges involved in its production and maintenance.
-
Review of Modern Vehicle Powertrains and Their Modelling and Simulation in MATLAB/Simulink
232-250Views:1050Thanks to technological advances and environmental standards, as well as changing usage patterns, road vehicles are constantly developing. Electric and hybrid vehicles are playing an increasingly important role in today’s road transport. The most significant changes are probably in the powertrain of vehicles. The efficiency of internal combustion engines increases while their emissions continue to decline. In addition, high performance electric motors, batteries and even fuel cells play an increasingly important role in hybrid and electric vehicles. In this publication, we review the drive systems of current modern vehicles and the types and characteristics of their major components. We also review the available models and computer programs for their simulation, focusing mainly on MATLAB/Simulink applications. Based on this, we can develop our own models and simulation programs which will help us to perform different driving dynamics simulations and to compare the performance, dynamic and energetic characteristics of these powertrains and their components to each other.
-
The CAD Modelling Possibilities of Gear Pairs by Two Ways in the Mechanical Engineering Practice
205-219Views:129The GearTeq 2021 software is a complex gear designer software which is capable to design different types of gears based on the initial geometric parameters by the user. Naturally, the users’ appropriate knowledge for the gear theorem and the manufacturing technology is indispensable for the design. The possibilities of the software are shown in this publication. The designed gear pairs are usable for different engineering fields (robots, working machines, vehicles, etc.).
-
Construction Solutions for Reducing the Effect of the Rear-end Collision
Views:147Analysing the accident statistics, we can detact that, the improvement of the transport safety is one of the most important engineering task. The number of the vehicles in the trasport gets significantly higher from year-to year, and the infrastructure of the cities frequently can not coordinate already it. Therefore the increasing of the vehicles’s number naturally involves the upgrowth of the accidents occasions too. The aim of the improvement of the vehicle-construction to reduce the personal injured and death resulted accidents number in contrast with the increasing traffic performance. This study analyses the construction options for reducing the effect of the rear-end collision whiches are concentrated for the passive vehicles and its passengers firtsly. Among the actual car manufacturers applied solutions, foward-looking possibilities and suggestions are described in this publication. The development can not be concentrated for only the safety improvement, the mass-optimalization must be completed simultenously. These apparent contrary requirements can be completed with application of new materials. Therefore the study addresses the more optimal utilization of the meatl foam in the vehicles crushbox. In addition, an optimized break-assist solution is described based on the Mercedes developed Pre Safe Plus® system to increas the abrorbtion of the impact energy.
-
Examining the Movement Differences in the Behavior of Normal and Rack Railway Vehicle
96-103Views:263The rack railway is a special type of railroad. There weren”t much built worldwide, and their number is decreasing. Now, in Budapest, there is a possibility to create an interoperable vehicle, based upon the experience gained from the previously operated line, and all the research regarding its unique characteristics. One from the many important sector of its operation, is the rail/rack/vehicle system. Its mechanical model is far more complex than a traditional railroad vehicle. We will demonstrate its behaviorial differences from a traditional railroad vehicle.
-
Optimization and Analysis of Structure about Lifting Device of Logistics Sorting
425-431Views:159The lifting device of a logistics sorting machine needs high frequency upward and downward reciprocating motion therefore the cutting fork arms and matching parts of the shaft are often worn out. In this paper the problem of the shear fork types applied for the lifting mechanism is studied at first. Then the advanced numerical simulation software ANSYS adopted for the lifting mechanism of the shear fork type, and the means of virtual simulation is introduced. Hence the possible location of faults and fault modes are analysed. Then improving measures about the lifting mechanism of the logistics sorting machine are suggested.
-
Current Challenges in the Regulation of CO2 Emission of Road Vehicles
738-742Views:183Today, as part of the fight against climate change, regulations on greenhouse gas emissions are gaining significantly higher attention. Our work focuses on the European Union legislation on carbon dioxide emissions from road vehicles, with special emphasis on the target values. Current changes in CO2 measurement methods, as important issues of the regulations, are also reviewed within this article.
-
The Effect of annealing temperature on corrosion resistance and microstructure of Zr-Sn-Nb-Fe alloy
420-424Views:117The Ti-2Al-2.5Zr titanium alloy plate in beta phase water quench at different times of the reentry after annealing is implemented while primary phase number and size distribution of samples are obtained. This research is carried out on corrosion behavior in 3.5% [mass fraction] NaCl solution. Experimental study showed that after the beta phase water quenching Ti-2Al-2.5Zr titanium alloyed after 500 oC annealing when partial recrystallization happened. There seems to be lots of tiny dispersion in the alloy that was annealed with its samples of six-party [HCP] structure of Ti, Zr, Al phase 2 with the dimension below 100 nm. Reaching 500 oC when the rate of annealing at a primary phase of the sample at 550 oC is low 90% of the primary phase is less than 100 nm. The changing of the rule of present decreasing also triggers little difference overall. Precipitation in the process of annealing Zr [Nb,Fe,Cr] 2is less that proves to be good for corrosion resistance.
-
Economic Effect of the Coronavirus on the Companies Involved in Car and Automotive Parts Trading, and Manufacture of Tires of Hungary, Including Szabolcs-Szatmár-Bereg County, in Respect of 2020
1-12Views:217In Hungary the wake of the first wave of the Covid-19 epidemic (March 2020), caused a decline in demand for goods and services in most sectors. There were sectors (accommodation services, art, recreation, etc.), which were economically severely burdened by the imposition of restrictive measures, and there were some (financial services, communication), which experienced the change positively. In our research, our goal was to assess the changes caused by the Covid-19 epidemic in the property, financial and profitability situation of the companies involved in car and automotive parts trading, and tire manufacturing, in Hungary, and within the country, in Szabolcs-Szatmár-Bereg county. We established three hypotheses: (1) As a result of the spread of coronavirus epidemic, in Hungary and in Szabolcs-Szatmár-Bereg county as well, the profitability of companies of NAICS codes 441 (car and automotive parts trading) and 4231 (wholesale of road vehicles and parts), decreased. (2) The outbreak of the epidemic had a negative impact on the liquidity of companies established in Hungary, including Szabolcs- Szatmár-Bereg county. (3) As a result of the Covid-19 epidemic, the resource structure of Szabolcs-Szatmár-Bereg county companies, analysed in the framework of research work, transformed. To prove or disprove these, secondary research was used. Finally, we put forward conclusions and proposals for the management of the companies active in this industry.
-
Derivation of ZF6HP26 Speed Transmission
48-63Views:125Due to the increasing importance of automation, automatic transmissions have appeared. The different ratios of the transmission may be achieved by braking and coupling the corresponding elements of the planetary gear sets connected in series. The focus of the study is on the ZF6HP26 transmission. After disassembly and clarifying the teeth number of the gears, we derived the equations parametricly providing the ratios using the speed equations published in the literature. The ratio of each gear is calculated by substituting the particular teeth numbers into the derived equations.
-
Long Container Dwell Time at Seaport Terminals: An Investigation Study from a Consignee Perspective
Views:444Many companies are concerned about the problem of increasing average dwell time for their import containers at the port of the final destination and therefore incurring additional shipping costs in form of demurrage charges for the port administration and detention charges for the shipping line. Previous studies have addressed this topic by analyzing terminal operations and evaluated its effects on port productivity and competitiveness; however few studies have explicitly explored long container dwell time causes from a consignee perspective. This research aims to identify the causes of long dwell time for the import containers at port storage yards for one of the leading FMCG companies in Jordan. To that end, the data of import containers whose stay at the terminal exceeded the free storage days in the period between 2019 and 2020 were collected by referring to the set of shipping documents and reviewing the correspondences between the consignee and other parties in the supply chain. Based on the timelines that have been analyzed for each case of delay to the collection of shipping documents in consideration with the payment terms, as well as the clearance and delivery timelines, ten causes for the long container dwell time have been identified and classified into three main categories according to the types of flow in the supply chain; five causes related to information flow, two causes related to cash flow, and three causes related to physical flow. The impact of these causes has been evaluated using the demurrage and detention charges as a measure indicator and the findings of this research have also revealed that the causes related to cash flow have a greater impact than the other types of causes.
-
Frequency Domain Analysis of Tractor Tyre Enveloping Properties
223-229Views:77Main source of vibration excitation for off-road vehicles are ground profile undulations. Most unprepared terrains are characterized by wavelength of unevenness that is of the order of magnitude of the contact length between tire and ground, so that, due to its shape and elasticity, tire actually behaves as geometric low-pass filter transforming real road profile geometry into effective vehicle vibration excitation. Since this effective profile represents real vehicle excitation, it is of interest to study this filtering behaviour in more depth. In this work, investigation of this kind of tire response has been studied for agricultural tractor tire rolling quasistatically over singular road obstacle. Frequency analysis of road excitation and tyre response was carried out in order to obtain their spectra and frequency response function magnitude of the tyre as filter was obtained by dividing input by output spectra. Final assessment of frequency response function magnitude was obtained by averaging instances obtained for different dimensions of input obstacles.
-
Manufacturing Process Optimization and Tool Condition Monitoring in Mechanical Engineering
72-89Views:146The optimization of manufacturing and production processes with various computer software is essential these days. Solutions on the market allow us to optimize and improve our manufacturing and production processes; one of the most popular software is called Tecnomatrix, which is described in this paper. Tool condition monitoring is a vital part of the manufacturing process in the industry. It requires continuous measurement of the wear of the cutting tool edges to improve the surface quality of the work piece and maintain productivity. Multiple methods are available for the determination of the actual condition of the cutting tool. Vibration diagnostics and acoustic methods are included in this paper. These methods are simple, it requires only high sensitive sensors, microphones, and data acquisition unit to gather the vibration signal and make signal improvement. Extended Taylor equation is applied for tool edge wear ratio. Labview and Matlab software are applied for the measurement and the digital signal processing. Machine learning method with artificial neural network is for the detection and prediction of the edge wear to estimate the remaining useful lifetime (RUL) of the tool.
-
LSI with Support Vector Machine for Text Categorization – a practical example with Python
18-29Views:362Artificial intelligence is becoming a powerful tool of modernity science, there is even a science consensus about how our society is turning to a data-driven society. Machine learning is a branch of Artificial intelligence that has the ability to learn from data and understand its behavers. Python programming language aiming the challenges of this new era is becoming one of the most popular languages for general programming and scientific computing. Keeping all this new era circumstances in mind, this article has as a goal to show one example of how to use one supervised machine learning method, Support Vector Machine, and to predict movie’s genre according to its description using the programming language of the moment, python. Firstly, Omdb official API was used to gather data about movies, then tuned Support Vector Machine model for Latent semantic indexing capable of predicting movies genres according to its plot was coded. The performance of the model occurred to be satisfactory considering the small dataset used and the occurrence of movies with hybrid genres. Testing the model with larger dataset and using multi-label classification models were purposed to improve the model.
-
Conceptual Design of the Low-Cost Environmental Temperature Test Chamber System
81-94Views:95Unmanned robots being remotely controlled or autonomous are spread worldwide and used in different purposes. Inhabited robots are brought very close to users and accessibility to these tools is very high, moreover, at very low costs. Regardless to emphasize the increasing popularity of these robots. However, any robot system being electrically driven and controlled has bottleneck in the amount of the electrical energy stored aboard in the battery packs. In other words, due to limited amount of the electrical energy available special issues related to use energy best way with maximum effectiveness are needed and considered. Additionally, the battery management system is needed to control the processes of the discharge and the charge ensuring technical data and parameters set by the manufacturer. This paper addresses robot applications in regions out of the calculated when special environmental testing is needed to confirm battery pack technical data. Among those of the environmental tests required the temperature test is in the focus of attention. The main idea and purpose of this paper is to set up new concept of the low-cost environmental temperature test chamber, to define its technical parameters and other properties needed for its preliminary design and prototype manufacturing.
-
Analysing the Conditions of SMEs Regarding Quality Assurance in Hungary and the European Union
Views:168Nowadays, small and medium sized enterprises (SME) have a relatively large task and expectation caused by the appearing of populated large foreign-owned enterprises in our country. In order that they will be able to cooperate with them and be able to join and integrate into the value chain they supply they must meet the high quality of standards. Obtaining then preserving quality certificates is essential for this. It can be fulfilled exclusively with thorough screening and problem identification.
This situation is exacerbated continuously by globalization in which each sector is involved. It means that they must remain competitive globally. Although in our country most of the small and medium sized enterprises bears the specific characteristics of family businesses innovation may not be avoided if they intend to stay competitive. To fulfil this quality assurance is one of its integral part.
